Readout Techniques for Drift and Low Frequency Noise Rejection in Infrared Arrays

Three different methods are presented to subtract thermal drifts and low-frequency noise from the signal of infrared array. The first is dead pixels with open Indium bumps, the second is reference output as implemented on the Hawaii2 multiplexer, and the third is dark pixels to emulate reference cells having a capacity connected to the gate of the unit cell field-effect transistor (FET). The third method is the most effective and yields a reduction in readout noise from15.4–9.4 erms. A novel method will be described to extend this readout technique to the Aladdin 1 K × 1 K InSb array. This revised version was published online in July 2006 with corrections to the Cover Date.     

Spectra of quasiperiodic oscillations of galactic X-ray sources–dynamical regimes from a simple model

We suggest that the dynamical regime(s) underlying quasi-periodic oscillations observed in the spectra of bright galactic-bulge X-ray sources are nonlinear with a mixed phase space. The important feature of such regimes is that they are generic among nonlinear Hamiltonian and nearly Hamiltonian systems of more than two degrees of freedom. We give a simple example of such chaotic (deterministic) systems whose spectra share a number of features with those observed for quasiperiodic oscillations of such sources.     

National ocean policy—new opportunities for Malaysian ocean development

Being a littoral state, Malaysian maritime sectors provide the basis for the growth and development of marine-related activities. As the country enters the new millennium along with the ‘2020 Vision’ which serves as the basic template against which the economic performance of these sectors should be judged, it poses a new challenge for Malaysia in developing these sectors. This paper attempts to address three basic issues: Firstly, is there any national ocean policy in place? Secondly, are the maritime sectors adequately organized to play an important role in achieving the objectives? Thirdly, what are the opportunities available in developing the ocean?It can be seen that existing policies to develop comprehensive ocean governance have not received the full attention they deserve. Organizational structures governing the ocean for implementing national policies are well in place but in a fragmented and uncoordinated fashion. As a result, sectoral and intersectoral management problems were created such as multiple-use conflicts, overlapping of jurisdiction and duplication of efforts. Environmental problems have also not been properly addressed. A few sectors have been identified as offering opportunities to further develop the Malaysian maritime areas. Among these are marine education and human resources development, marine tourism and the seafood industry.     

Estimation of sediment load and erosion of different geological units: A case study from a basin of north-eastern Iran

Erosion of geological units and sediment load in rivers can be considered as the serious problems in recent decades.Increasing sediment loads generate major hazards for water resources development,particularly in terms of loss of reservoir storage due to sedimentation and siltation of water distribution systems.In this paper,the performance of four sediment rating curve (SRC) development methods was evaluated for the Shirin Darreh River(SDR) basin (1750 km2),located in North Khorasan Province,Iran.Data of flow discharge (Q) and suspended sediment flux (SSF)(Q-SSF pairs,N=957)and daily flow discharge,recorded by the Regional Water Company of North Khorasan (RWCNK) at the Qaleh-Barbar (QB) gauging site during 1989-2018were used.The flow discharge classification method performed best by meeting the desired criteria of most statistical indices,including normalized root mean square error (NRMSE),mean bias error (MBE),mean absolute error (MAE),index of agreement (d),and coefficient of determination (R~2).Based on the optimized method,the rate of suspended sediment transportation at the study site was estimated about2.7×10~6 ton year~(-1).Erodibility of the exposed formations in the study area was estimated based on a factorial scoring model (FSM).Three indices,focused on the outcrop and erodibility,were calculated for the geological units at sub-basin and total scales.Marl deposits are the most extensive geological unit in the three sub-basins and the maximum formation outcrop ratio (FOR) and participation in erosion (PCE)were obtained for these rocks at total scale.In fact,marl unit can be regarded as the main source to supply the suspended sediments in the study basin.     

Improved spatial delineation of streambed properties and water fluxes using distributed temperature sensing

A new method was developed for analysing and delineating streambed water fluxes, flow conditions and hydraulic properties using coiled fibre‐optic distributed temperature sensing or closely spaced discrete temperature sensors. This method allows for a thorough treatment of the spatial information embedded in temperature data by creating a matrix visualization of all possible sensor pairs. Application of the method to a 5‐day field dataset reveals the complexity of shallow streambed thermal regimes. To understand how velocity estimates are affected by violations of assumptions of one‐dimensional, saturated, homogeneous flow and to aid in the interpretation of field observations, the method was also applied to temperature data generated by numerical models of common field conditions: horizontal layering, presence of lateral flow and variable streambed saturation. The results show that each condition creates a distinct signature visible in the triangular matrices. The matrices are used to perform a comparison of the behaviour of one‐dimensional analytical heat‐tracing models. The results show that the amplitude ratio‐based method of velocity calculation leads to the most reliable estimates. The minimum sensor spacing required to obtain reliable velocity estimates with discrete sensors is also investigated using field data. The developed method will aid future heat‐tracing studies by providing a technique for visualizing and comparing results from fibre‐optic distributed temperature sensing installations and testing the robustness of analytical heat‐tracing models. Copyright © 2016 John Wiley & Sons, Ltd.     

Improved regional groundwater flow modeling using drainage features: a case study of the central northern karst aquifer system of Puerto Rico (USA)

In northern Puerto Rico (USA), subsurface conduit networks with unknown characteristics, and surface features such as springs, rivers, lagoons and wetlands, drain the coastal karst aquifers. In this study, drain lines connecting sinkholes and springs are used to improve the developed regional model by simulating the drainage effects of conduit networks. Implemented in an equivalent porous media (EPM) approach, the model with drains is able to roughly reproduce the spring discharge hydrographs in response to rainfall. Hydraulic conductivities are found to be scale dependent and significantly increase with higher test radius, indicating scale dependency of the EPM approach. Similar to other karst regions in the world, hydraulic gradients are steeper where the transmissivity is lower approaching the coastline. This study enhances current understanding of the complex flow patterns in karst aquifers and suggests that using a drainage feature improves modeling results where available data on conduit characteristics are minimal.     

Spatial correlation for horizontal and vertical components of acceleration from northern Iran seismic events

The evaluation of seismic risk of spatially distributed systems requires the spatial correlation model for ground motion intensity measures. This study investigates the spatial correlation of four earthquakes recorded in northern Iran. The intra-event spatial correlation for both horizontal and vertical components of spectral acceleration at eight periods in the range of 0.0–3.0 s is estimated using geostatistical tools. An exponential form is chosen to fit experimental semivariograms, and the correlation ranges of spectral accelerations as a function of period are derived. The results show similar trend of correlation ranges for both components. It should be mentioned that the ranges for the vertical component, in general, are higher than those observed for the horizontal one. For both components, the correlation ranges as a function of period are divided into three segments. The first and the third one are increasing while the second one is decreasing with increasing period.     

Brittleness Effect on Rock Fatigue Damage Evolution

The damage evolution mechanism of rocks is one of the most important aspects in studying of rock fatigue behavior. Fatigue damage evolution of three rock types (onyx marble, sandstone and soft limestone) with different brittleness were considered in the present study. Intensive experimental tests were conducted on the chosen rock samples and acoustic emission (AE) sensors were used in some of them to monitor the fracturing process. Experimental tests indicated that brittleness strongly influences damage evolution of rocks in the course of static and dynamic loading. AE monitoring revealed that micro-crack density induced by the applied loads during different stages of the failure processes increases as rock brittleness increases. Also, results of fatigue tests on the three rock types indicated that the rock with the most induced micro-cracks during loading cycles has the least fatigue life. Furthermore, the condition of failure surfaces of the studied rocks samples, subjected to dynamic and static loading, were evaluated and it was concluded that the roughness of failure surfaces is influenced by loading types and rock brittleness. Dynamic failure surfaces were rougher than static ones and low brittle rock demonstrate a smoother failure surface compared to high brittle rock.     

Three-dimensional discontinuous deformation analysis (3-D DDA) using a new contact resolution algorithm

This paper presents a new contact calculating algorithm for contacts between two polyhedra with planar boundaries in the three-dimensional discontinuous deformation analysis (3-D DDA). In this algorithm, all six type contacts in 3-D (vertex-to-face, vertex-to-edge, vertex-to-vertex, face-to-face, edge-to-edge, and edge-to-face) are simply transformed into the form of point-to-face contacts. The presented algorithm is a simple and efficient method and it can be easily coded into a computer program. In this paper, formulations of normal contact, shear contact and frictional force submatrices based on the new method are derived and the algorithm has been programmed in VC⁺⁺. Examples are provided to demonstrate the new contact rule between two blocks.