Der Pyroxentuff vom Heilsberg im Hegau

Zusammenfassung Das Tuffvorkommen vom Heilsberg bei Gottmadingen im Hegau wurde neu kartiert und mineralogisch untersucht. Die Korngrößenverteilung zeigt ein deutliches Maximum bei 0,6–1,2 mm. Der Tuff besteht aus 40% magmatogenem Material und 60% Bestandteilen des durchschlagenen Untergrundes. Die magmatogenen Komponenten sind 17% Einzehnineralien, 10% Grundmasse und 13 % Auswürflinge. Unter den Einzelmineralien wiegt der Pyroxen (Fassait) vor, daneben kommen Amphibol, Biotit und Magnetit, ferner Apatit und Analcim sowie einige seltenere Mineralien vor. Für Pyroxen, Amphibol, Biotit und Magnetit werden chemische Analyse und optische Eigenschaften mitgeteilt. Die größte Menge der magmatogenen Auswürflinge sind kugelförmige Lapilli, die hinsichtlich ihrer Entstehung genauer untersucht und chemisch analysiert wurden. Seltener sind grobkristalline, dunkle und belle Bomben, deren Mineralgehalt und chemische Zusammonsetzung genauer beschrieben werden. Sic stellen wahrscheinlich Differentiate des Heilsbergmagmas dar. Die ehemals glasige, magmatogene Grundmasse des Tuffs liegt heute als ein Gemenge von Montmorillonit und Calcit vor.Aus den nichtmagmatogenen Bestandteilen kann auf den Untergrund im Bereich des Heilsbergvulkans geschlossen werden. Aus dem Deckgebirge wurden Tertiär, Mahn, Dogger, Jura, Keuper und Muschelkalk nachgewiesen. Das Grund-gebirge besteht hauptsächlich aus granodioritischen bis granitischen Gesteinen und enthält auffallenderweise nur wenig Gneise. Der Herd der Eruption dürfte mindestens 4000 m tief liegen.Der Chemismus des Heilsbergmagmas ist hornblenditisch. Es ist dem Magma der Melilithite verwandt und leitet zu den Phonolithen des Hegau über. Das Gestein ist als hornblenditischer Pyroxen-Analcim-Tuff zu bezeichnen.Zwei unabhängige Bestimmungen nach der K-Ar-Methode ergaben für den Biotit des Tuffs ein obermiozänes Alter von 14,0 bzw. 14,5 Mill. Jahren.Mit 2 Textabbildungen     

Towards high‐resolution 3D marine seismic surveying using Boomer sources

The use of Boomer sources for 3D seismic imaging of shallow marine structures was investigated in a feasibility study. Boomers show sufficient stability to be used in multichannel seismic surveys. The acquisition of a high-frequency, densely sampled seismic data volume was successfully performed in the Baltic Sea. A Pleistocene fluvial channel system and shallow gas accumulations were revealed beneath the unconsolidated sediments which constitute the sea-floor in the southern Kiel Bay.     

Geomechanical model for the post-Variscan evolution of the Permocarboniferous–Mesozoic basins in Northeast Germany

The Permocarboniferous basins in Northeast Germany formed on the heterogeneous and eroded parts of the Variscan orogene and its deformed northern foreland. Transtensional tectonic movements and thermal re-equilibration lead to medium-scale crustal fragmentation, fast subsidence rates and regional emplacement of large amounts of mostly acidic volcanics. The later basin formation and differentiation was triggered by reversals of the large-scale stress field and reactivation of prominent zones of weakness like the Elbe Fault System and the Rhenohercynian/Saxothuringian boundary that separate different Variscan basement domains in the area. The geomechanical behaviour of the latter plays an important role for the geodynamic evolution of the medium to large-scale structural units, which we can observe today in three dimensions on structural maps, geophysical recordings and digital models. This study concentrates on an area that comprises the southern Northeast German Basin, the Saale Basin, the Flechtingen High, the Harz Mountains High and the Subhercynian Basin. The presented data include re-evaluations of special geological and structural maps, the most recent interpretation of the DEKORP BASIN 9601 seismic profile and observations of exposed rock sections in Northeast Germany. On the basis of different structural inventories and different basement properties, we distinguish two structural units to the south and one structural unit to the north of the Elbe Fault System. For each unit, we propose a geomechanical model of basin formation and basin inversion, and show that the Rhenohercynian Fold and Thrust Belt domain is deformed in a thin-skinned manner, while the Mid-German Crystalline Rise Domain, which is the western part of the Saxothuringian Zone, rather shows a thick-skinned deformation pattern. The geomechanical model for the unit north to the Elbe Fault System takes account to the fact that the base of the Zechstein beneath the present Northeast German basin shows hardly any evidence for brittle deformation, which indicates a relative stable basement. Our geomechanical model suggests that the Permocarboniferous deposits may have contributed to the structural stiffness by covering small to medium scale structures of the upper parts of the brittle basement. It is further suggested that the pre-Zechstein successions underneath the present Northeast German basin were possibly strengthening during the Cretaceous basin inversion, which resulted in stress transfer to the long-lived master faults, as indicated for example by the shape of the salt domes in the vicinity of the latter faults. Contrary to this, post-Zechstein successions deformed in a different and rather complex way that was strongly biased by intensive salt tectonic movements.     

A Case Study Of An On-Ice Air Flow Over The Arctic Marginal Sea-Ice Zone

A case study of warm air advection over the Arctic marginalsea-ice zone is presented, based on aircraft observations with direct flux measurements carriedout in early spring, 1998. A shallow atmospheric boundary layer (ABL) was observed, which wasgradually cooling with distance downwind of the ice edge. This process was mainly connected with astrong stable stratification and downward turbulent heat fluxes of about 10–20 W m^-2, but wasalso due to radiative cooling. Two mesoscale models, one hydrostatic and the other non-hydrostatic,having different turbulence closures, were applied. Despite these fundamental differences betweenthe models, the results of both agreed well with the observed data. Various closure assumptions had amore crucial influence on the results than the differences between the models.Such an assumption was, for example,the parameterization of the surface roughness for momentum (z₀) and heat (z_T). This stronglyaffected the wind and temperature fields not only close to the surface but also within and abovethe temperature inversion layer. The best results were achieved using a formulation for z₀ that took intoaccount the form drag effect of sea-ice ridges together withz_T = 0.1z₀. The stability within theelevated inversion strongly depended on the minimum eddy diffusivity K_min. A simple ad hocparameterization seems applicable, where K_min is calculated as 0.005 timesthe neutral eddy diffusivity. Although the longwave radiative cooling was largest within the ABL, theapplication of a radiation scheme was less important there than above the ABL. This was related to theinteraction of the turbulent and radiative fluxes. To reproduce the strong inversion, it wasnecessary to use vertical and horizontal resolutions higher than those applied in most regional andlarge-scale atmospheric models.     

The Oeschinensee rock avalanche,Bernese Alps,Switzerland: a co-seismic failure 2300 years ago?

Landslide deposits dam Lake Oeschinen (Oeschinensee), located above Kandersteg, Switzerland. However, past confusion differentiating deposits of multiple landslide events has confounded efforts to quantify the volume, age, and failure dynamics of the Oeschinensee rock avalanche. Here we combine field and remote mapping, topographic reconstruction, cosmogenic surface exposure dating, and numerical runout modeling to quantify salient parameters of the event. Differences in boulder lithology and deposit morphology reveal that the landslide body damming Oeschinensee consists of debris from both an older rock avalanche, possibly Kandertal, as well as the Oeschinensee rock avalanche. We distinguish a source volume for the Oeschinensee event of 37 Mm³, resulting in an estimated deposit volume of 46 Mm³, smaller than previous estimates that included portions of the Kandertal mass. Runout modeling revealed peak and average rock avalanche velocities of 65 and 45 m/s, respectively, and support a single-event failure scenario. ³⁶Cl surface exposure dating of deposited boulders indicates a mean age for the rock avalanche of 2.3 ± 0.2 kyr. This age coincides with the timing of a paleo-seismic event identified from lacustrine sediments in Swiss lakes, suggesting an earthquake trigger. Our results help clarify the hazard and geomorphic effects of rare, large rock avalanches in alpine settings.     

Inter‐laboratory Characterisation of Apatite Reference Materials for Chlorine Isotope Analysis

Here we report on a set of six apatite reference materials (chlorapatites MGMH#133648, TUBAF#38 and fluorapatites MGMH#128441A, TUBAF#37, 40, 50) which we have characterised for their chlorine isotope ratios; these RMs span a range of Cl mass fractions within the apatite Ca₁₀(PO₄)₆(F,Cl,OH)₂ solid solution series. Numerous apatite specimens, obtained from mineralogical collections, were initially screened for ³⁷Cl/³⁵Cl homogeneity using SIMS followed by δ³⁷Cl characterisation by gas source mass spectrometry using both dual‐inlet and continuous‐flow modes. We also report major and key trace element compositions as determined by EPMA. The repeatability of our SIMS results was better than ± 0.10‰ (1s) for the five samples with > 0.5 % m/m Cl and ± 0.19‰ (1s) for the low Cl abundance material (0.27% m/m). We also observed a small, but significant crystal orientation effect of 0.38‰ between the mean ³⁷Cl/³⁵Cl ratios measured on three oriented apatite fragments. Furthermore, the results of GS‐IRMS analyses show small but systematic offset of δ³⁷Cl_SMOC values between the three laboratories. Nonetheless, all studied samples have comparable chlorine isotope compositions, with mean 10³δ³⁷Cl_SMOC values between +0.09 and +0.42 and in all cases with 1s ≤ ± 0.25.     

Suevite of the ries crater,Germany: Source rocks and implications for cratering mechanics

Suevites are impact breccias with a montmorillonitic matrix that contains shocked and unshocked mineral and rock fragments from the crystalline basement, glass inclusions and a small amount of sedimentary clasts. Data are given of the modal composition of fall-out suevites (deposited at isolated points around the crater) and crater suevite (forming a layer below post-impact lake sediments in the crater cavity). Fall-out suevites contain aerodynamically shaped bombs which are absent in crater suevite. Taking into account not only large glass fragments and bombs, but also the finer fractions, the glass content of fall-out and crater suevites amounts to 47 and 29 vol%, respectively. Crystalline clasts in suevites consist of all igneous and metamorphic rock types that constitute the local basement which consists of an upper layer of igneous rocks (mainly granites) and a lower series of gneisses and amphibolite. Based on a collection of 1 200 clasts from 13 suevite occurrences the average crystalline clast population of suevites was determined. Suevites contain on the average 46 % igneous and 54 % metamorphic clasts. In constrast, weakly shocked and unshocked crystalline ejecta of the Ries structure consist of 82 % igneous and 18 % metamorphic rocks. From 138 analyses of crystalline rock samples average compositions of the major rock types were calculated. Comparison of these averages with the average glass composition leads to the conclusion that suevite glasses were formed by shock melting of gneisses in deeper levels of the basement. Suevite matrices consist in most cases of 80 to 90 % montmorillonite, in special cases of celadonite. Chemical analyses are given of some matrices and montmorillonite formulas calculated. It is supposed that montmorillonite was formed by early hydrothermal alteration of rock flour or fine glass particles. In the latter case the original glass content of suevites was higher than at present. Of all ejecta from the Ries crater only crystalline rocks contained in suevites occur in all stages of shock metamorphism up to complete fusion. The overwhelming majority of the ejecta from the sedimentary sequence (about 580 m) show no indications of shock pressures above 10 GPa. The same holds true for crystalline megablocks and breccias around the crater which consist mainly of granites from upper levels of the basement. We assume that the Ries impact can be approximated by a deep-burst model: The projectile penetrated through the sedimentary cover into the basement in such a way that the highest pressures and temperatures developed within the gneiss complex below the upper, predominately granitic layer and that rocks of the sedimentary sequence experienced weak shock compression. Numerical data are given for such a model of the Ries impact on transient crater geometry and volumes of vaporized, melted, shocked and excavated rocks. Fall-out suevites are supposed to have been lifted from the central zone by an expanding plume of vaporized rocks and deposited as fluidized turbulent masses outside the crater whereas the main mass of crater suevite was not removed from the crater cavity.     

Trace analysis of quaternary aminoalcohols as degradation products from softeners in wastewater

The sensitive and selective determination of polyalcohols without chromophores or fluorophores in the lower ppb-level is still an analytical task of high interest, especially in the field of environmental investigations. This paper describes a cation-exchange HPLC procedure for the separation and fluorescence detection of two quaternary ammonium compounds with polyalcoholic groups (degradation products of fabric softener) after derivatization with 9-fluorenylmethyl chloroformate (FMOC). Detailed experiments were carried out to determine optimum reaction conditions (pH, reaction time, temperature), linear range, detection limits, and kinetics of the reaction. The HPLC separation on a cation-exchange column includes a gradient program which provides complete separation from neutral compounds also reacting with FMOC and its hydrolysis products formed during the reaction in alkaline medium. High specificity for both investigated ammonium compounds with detection limits in the range of 1 ppb could be achieved.     

The glacial inception as recorded in the NorthGRIP Greenland ice core: timing, structure and associated abrupt temperature changes

The mechanisms involved in the glacial inception are still poorly constrained due to a lack of high resolution and cross-dated climate records at various locations. Using air isotopic measurements in the recently drilled NorthGRIP ice core, we show that no evidence exists for stratigraphic disturbance of the climate record of the last glacial inception (∼123–100 kyears BP) encompassing Dansgaard–Oeschger events (DO) 25, 24 and 23, even if we lack sufficient resolution to completely rule out disturbance over DO 25. We quantify the rapid surface temperature variability over DO 23 and 24 with associated warmings of 10±2.5 and 16±2.5°C, amplitudes which mimic those observed in full glacial conditions. We use records of δ¹⁸O of O₂ to propose a common timescale for the NorthGRIP and the Antarctic Vostok ice cores, with a maximum uncertainty of 2,500 years, and to examine the interhemispheric sequence of events over this period. After a synchronous North–South temperature decrease, the onset of rapid events is triggered in the North through DO 25. As for later events, DO 24 and 23 have a clear Antarctic counterpart which does not seem to be the case for the very first abrupt warming (DO 25). This information, when added to intermediate levels of CO₂ and to the absence of clear ice rafting associated with DO 25, highlights the uniqueness of this first event, while DO 24 and 23 appear similar to typical full glacial DO events.     

Heidornit Na2Ca3[Cl · (SO4)2 · B5O8(OH)2] ein neues Bormineral aus dem Zechsteinanhydrit Mit einer röntgenographischen Untersuchung

Ohne Zusammenfassung