Color removal from industrial wastewater with a novel coagulant flocculant formulation

Chemically enhanced wastewater treatment is attracting substantial interest among the currently employed chemical unit processes in wastewater treatment. Coagulation-flocculation has received considerable attention for yielding high pollutant removal, especially color removal. This investigation presents a novel formulation of coagulation-flocculation for color removal from industrial wastewater and illustrates its efficiency, with aid of measurement of solid sludge content, suspended solid content, percentage of solid recovery, UV absorption in wastewater effluent from two automotive factories. The results show that the novel formulation can remove color content from wastewater efficiently. The treated wastewater had UV absorption close to distillated water and color was removed up to 96% by flocculation / coagulation treatment.     

Post‐Variscan exhumation of the Central Anti‐Atlas (Morocco) constrained by zircon and apatite fission‐track thermochronology

The origin of the Anti‐Atlas relief is one of the currently debated issues of Moroccan geology. To constrain the post‐Variscan evolution of the Central Anti‐Atlas, we collected nine samples from the Precambrian basement of the Bou Azzer‐El Graara inlier for zircon and apatite fission‐track thermochronology. Zircon ages cluster between 340 ± 20 and 306 ± 20 Ma, whereas apatite ages range from 171 ± 7 Ma to 133 ± 5 Ma. Zircon ages reflect the thermal effect of the Variscan orogeny (tectonic thickening of the ca. 7 km‐thick Paleozoic series), likely enhanced by fluid advection. Apatite ages record a complex Mesozoic–Cenozoic exhumation history. Track length modelling yields evidence that, (i) the Precambrian basement was still buried at ca. 5 km depth by Permian times, (ii) the Central Anti‐Atlas was subjected to (erosional) exhumation during the Triassic‐Early Cretaceous, then buried beneath ca. 1.5 km‐thick Cretaceous‐Paleogene deposits, (iii) final exhumation took place during the Neogene, contemporaneously with that of the High Atlas.     

Geological and geophysical studies of the Agoudal impact structure (Central High Atlas,Morocco): New evidence for crater size and age

Since the discovery of shatter cones (SCs) near the village of Agoudal (Morocco, Central High Atlas Mountains) in 2013, the absence of one or several associated circular structures led to speculation about the age of the impact event, the number, and the size of the impact crater or craters. Additional constraints on the crater size, age, and erosion rates are obtained here from geological, structural, and geophysical mapping and from cosmogenic nuclide data. Our geological maps of the Agoudal impact site at the scales of 1:30,000 (6 km²) and 1:15,000 (2.25 km²) include all known occurrences of SCs in target rocks, breccias, and vertical to overturned strata. Considering that strata surrounding the impact site are subhorizontal, we argue that disturbed strata are related to the impact event. Three types of breccias have been observed. Two of them (br1‐2 and br2) could be produced by erosion–sedimentation–consolidation processes, with no evidence for impact breccias, while breccia (br1) might be impact related. The most probable center of the structure is estimated at 31°59′13.73?N, 5°30′55.14?W using the concentric deviation method applied to the orientation of strata over the disturbed area. Despite the absence of a morphological expression, the ground magnetic and electromagnetic surveys reveal anomalies spatially associated with disturbed strata and SC occurrences. The geophysical data, the structural observations, and the area of occurrence of SCs in target rocks are all consistent with an original size of 1.4–4.2 km in diameter. Cosmogenic nuclide data (³⁶Cl) constrain the local erosion rates between 220 ± 22 m Ma^?1 and 430 ± 43 m Ma^?1. These erosion rates may remove the topographic expression of such a crater and its ejecta in a time period of about 0.3–1.9 Ma. This age is older than the Agoudal iron meteorite age (105 ± 40 kyr). This new age constraint excludes the possibility of a genetic relationship between the Agoudal iron meteorite fall and the formation of the Agoudal impact site. A chronolgy chart including the Atlas orogeny, the alternation of sedimentation and erosion periods, and the meteoritic impacts is presented based on all obtained and combined data.     

Delineation of groundwater potential zones using remote sensing and GIS-based data-driven models

The rapid increase in human population has increased the groundwater resources demand for drinking, agricultural and industrial purposes. The main purpose of this study is to produce groundwater potential map (GPM) using weights-of-evidence (WOE) and evidential belief function (EBF) models based on geographic information system in the Azna Plain, Lorestan Province, Iran. A total number of 370 groundwater wells with discharge more than 10 m³s^?1were considered and out of them, 256 (70%) were randomly selected for training purpose, while the remaining114 (30%) were used for validating the model. In next step, the effective factors on the groundwater potential such as altitude, slope aspect, slope angle, curvature, distance from rivers, drainage density, topographic wetness index, fault distance, fault density, lithology and land use were derived from the spatial geodatabases. Subsequently, the GPM was produced using WOE and EBF models. Finally, the validation of the GPMs was carried out using areas under the ROC curve (AUC). Results showed that the GPM prepared using WOE model has the success rate of 73.62%. Similarly, the AUC plot showed 76.21% prediction accuracy for the EBF model which means both the models performed fairly good predication accuracy. The GPMs are useful sources for planners and engineers in water resource management, land use planning and hazard mitigation purpose.     

Effect of storms during drought on post‐wildfire recovery of channel sediment dynamics and habitat in the southern California chaparral,USA

Current global warming projections suggest a possible increase in wildfire and drought, augmenting the need to understand how drought following wildfire affects the recovery of stream channels in relation to sediment dynamics. We investigated post‐wildfire geomorphic responses caused by storms during a prolonged drought following the 2013 Springs Fire in southern California (USA), using multi‐temporal terrestrial laser scanning and detailed field measurements. After the fire, a dry‐season dry‐ravel sediment pulse contributed sand and small gravel to hillslope‐channel margins in Big Sycamore Creek and its tributaries. A small storm in WY 2014 generated sufficient flow to mobilize a portion of the sediment derived from the dry‐ravel pulse and deposited the fine sediment in the channel, totaling ~0.60 m³/m of volume per unit length of channel. The sediment deposit buried step‐pool habitat structure and reduced roughness by over 90%. These changes altered sediment transport characteristics of the bed material present before and after the storm; the ratio of available to critical shear stress (τ_o/τ_c) increased by five times. Storms during WY 2015 contributed additional fine sediment from tributaries and lower hillslopes and hyperconcentrated flow transported and deposited additional sediment in the channel. Together these sources delivered sediment on the order of six times that in 2014, further increasing τ_o/τ_c. These storms during multi‐year drought following wildfire transformed channel dynamics. The increased sediment transport capacity persisted during the drought period characterized by the longer residence time of relatively fine‐grained post‐fire channel sedimentation. This contrasts with wetter years, when post‐fire sediment is transported from the fluvial system during the same season as the post‐fire sediment pulse. Results of this short‐term study highlight the complex and substantial effects of multi‐year drought on geomorphic responses following wildfire. These responses influence pool habitat that is critical to longer‐term post‐wildfire riparian ecosystem recovery. Copyright © 2017 John Wiley & Sons, Ltd.     

Spatial and Temporal Distribution of Dust‐Bound Trace Metal Elements around Kuhdasht Watershed Area in Iran

Dust, as a source of trace metal elements, affects the health of society. The spatial and temporal concentrations of dust‐bound trace metals (Cd, Pb, Ni, Zn, Cu, and Mn) in Kuhdasht watershed (456 km²), Lorestan Province, Iran, is investigated. Dust is collected using glass traps placed in ten research stations in the region. The spatial and temporal distribution of dust trace metals are plotted using ARC‐GIS. The highest and the lowest concentrations of Zn (9751150 mg kg^?1), Pb (46.352.9 mg kg^?1), and Cd (2.443.30 mg kg^?1) are obtained in winter, of Ni (98110 mg kg^?1) and Cu in autumn (16.053.5 mg kg^?1), and of Mn in summer (385505 mg kg^?1). The spatial concentrations of dust‐bound trace metals indicate all, except Cu, show a decreasing trend from the mountains toward the plains, similar to that of soil and of dust, except for Zn, which shows higher concentrations in dust than in soil. The potential sources of dust‐bound trace metals and their rate of contamination are also investigated using the enrichment and contamination factors. The major sources of Cd and Zn in the dust of watershed are due to anthropogenic activities or from activities outside the borders.     

Characteristics of magnetic and non-magnetic lag in the Cobar area, NSW

Geochemical patterns from two lag anomalies in the Cobar region of central New South Wales are described. The region is semi-arid, deeply weathered and some areas are covered by variable thicknesses of aeolian and alluvial transported overburden.Lag morphology and mineralogy are related to landform. In erosional landforms the surface is covered by lag, which is composed of coarse fragments derived locally from bedrock and displays varying degrees of ferruginization, together with a range of secondary pisoids. In depositional landforms the lag is less abundant and contains more pisoids. Deflation by sheetwash may lead to lag being partially buried by alluvium. In a large proportion of pisoid lag, hematite and goethite have been converted to maghemite, allowing ready separation into magnetic and non-magnetic fractions. The non-magnetic fraction is dominated by the lithic lag whereas the magnetic fraction is dominated by pisoid lag.The magnetic and non-magnetic components of the 2–11 mm lag fraction, milled to < 75 μm and subjected to HF-HNO₃-HClO₄ attack, give rise to distinct geochemical patterns at targets related to a variant of the Cobar style of Pb-Zn mineralization with variable silicification and to Zn mineralization in a swarm of quartz and carbonate veinlets. The patterns are influenced by metal source, lag type, surface chemical conditions and landtbrm. Differences in the correlation between metal contents in the magnetic and non-magnetic lag components, and between trace elements and Fe. indicate variable loss of Cu and Zn from the magnetic lag at some targets but retention of Pb. The presence of a readily cxtractable base metal component in the lag has implications for detecting anomalies in transported cover in the region.     

A vision for Iran’s fuel cell and hydrogen development

Hydrogen combined with fuel cell (FC) technology has been widely discussed as a long-term fuel option to address environmental and energy security concerns. Iran, despite outlining a long-term plan to develop its renewable energies’ (REs) infrastructures, is faced with difficulties in deploying fuel cell hydrogen (FCH). These obstacles—led by lack of adequate funding—have caused a slowdown in the government-driven initiatives in recent years, thus resulting in projects delays and suspensions. This paper focuses on current status of Iran’s FCH within and among leading and neighboring countries. Barriers and challenges of the three main actors (government, university, and industry) on Iran’s FCH development are analyzed and then supported with a policy perspective. It is shown that the government obligations play a significant role to overcome these obstacles and also act as the main driving force to perform the required actions. The paper also proposes strategic measures in a short-, medium-, and long-term framework to promote the technology in Iran in hopes of a clear national policy and a proper vision. It is shown that the responsibility for the short- and medium-term actions lies predominantly upon the government while it will be fully devolved to the private sector in the long term.     

The latest Carboniferous–Early Permian Dorud Group of the eastern Alborz (Iran): biostratigraphy and taxonomy of smaller foraminifers

The latest Carboniferous–Early Permian Dorud Group in the Chaman‐Saver area of eastern Alborz, Iran is more than 222 m thick and includes thick sequences of oncolitic limestone, sandy limestone, sandstones and shales. The Emarat and Ghosnavi formations of this Group are dated here as latest Gzhelian to early Sakmarian Stages. During the Asselian Stage, the sea level fell abruptly and epeirogenic episodes occurred. These events generated a broad, shallow carbonate platform suitable for the growth and diversity of smaller foraminifers in the Chaman‐Saver area which, consequently, displays faunal differences with the rest of the Alborz Mountains. Three foraminiferal biozones are proposed: Nodosinelloides potievskayae–Vervilleina bradyi Zone (latest Gzhelian), Calcitornella heathi–Nodosinelloides sp. Zone (latest Gzhelian–Asselian), and Rectogordius iranicus n. gen. n. sp.–Hemigordius schlumbergeri Zone (early Sakmarian). The new taxa described herein include: Pseudovidalina iranica n. sp., P. damghanica n. sp., Rectogordius iranicus n. gen. n. sp. and Tezaquina sp. 1. Copyright © 2012 John Wiley & Sons, Ltd.