Drumlin formation in Southern Anglesey and Arvon,Northwest Wales

This is a study of Late Devensian drumlins formed in southern Anglesey and Arvon, northwest Wales. This area was affected by ice sheet coalescence when the Welsh ice sheet met with the lrish Sea ice sheet, and drumlins were formed once the two had coalesced. It is suggested that the drumlins were the result of net subglacial soft-bed erosion, and that they represent more resistant cores within the subglacial deforming layer. The drumlins have either gravel or till cores, and where the core was deformable, large-scale compressive glaciotectonic structures were seen (e.g. Dinas Dinlle) with local subglacial compression of –59%. Where the cores were more resistant (e.g. Lleiniog) these were not deformed but remained as more competent masses within the deforming layer. It is suggested that the less competent material flowed around the cores, some remaining as a thin carapace, but most of the material being removed down glacier, leaving the drumlins as erosional remnants. In northwest Wales there is a multi-till sequence that traditionally has been interpreted as having been deposited as the result of separate ice-sheet advances and retreats. However, in this study, it is suggested that the different tills were deposited as the result of ice-sheet coalescence, and that sites such as Dinas Dinlle do not show evidence of a major readvance in the retreat of the Devensian ice, but are indicative of continuously changing conditions within the subglacial deforming bed.     

Trace-element-rich brines in eclogitic veins: implications for fluid composition and transport during subduction

Primary and pseudosecondary fluid inclusions occur in oscillatory-and sector-zoned omphacite in eclogitic veins from the Monviso ophiolitic complex in the Western Alps. The inclusions contain aqueous brines and daughter crystals of halite, sylvite, calcite, dolomite, albite, anhydrite and/or gypsum, barite, baddeleyite, rutile, sphene, Fe oxides, pyrite and monazite. This daughter mineral suite indicates high solubilites of Na, K, Ca, Mg, Fe, Zr, Ti, P, Ba, Ce, La, Th, and S species and provides direct evidence for transport of high-fieldstrenght, large-ion-lithophile, and light-rare-earth elements as dissolved species during subduction. Fluid-inclusion heterogeneities preserved within and between adjacent grains in the veins, however, suggest that the scale of fluid equilibration was small. A crack-seal geometry in some of the veins implies that fluid release in pulses rather than steady flow controlled mineral deposition and growth in the veins. From these observations, we develop a model of fluid release and entrapment in which pulses of fluid are associated in time with increments of shear and tensile failure; the rate of fluid release and the reduction in porosity both depend on the rate of plastic flow. Vein fluids may initially be derived from decreptitation of early fluid inclusions in the host eclogites, Small-scale fluid heterogeneities implied by the fluid inclusions in the veins are best interpreted in terms of limited fluid flow, and hence limited metasomatism. We conclude that element recycling into the mantle wedge during subduction will depend at least as strongly on fluid transport mechanisms as on element solubilities in the fluid phase. At Monviso, despite evidence for high trace element solubilities in saline brines, the elements were not removed from the downgoing slab prior to teaching depths of 40 km.     

Comparison of isotope pairing and N2:Ar methods for measuring sediment denitrification—Assumption, modifications, and implications

Denitrification has been measured during the last few years using two different methods in particular: isotope pairing measured on a triple-collector isotopic ratio mass spectrometer and N₂:Ar ratios measured on a membrane inlet mass spectrometer (MIMS). This study compares these two techniques in short-term batch experiments. Rates obtained using the original N₂∶Ar method were up to 3 to 4 times higher than rates obtained using the isotope pairing technique due to O₂ reacting with the N₂ during MIMS analysis. Oxygen combines with N₂ within the mass spectrometer ion source forming NO⁺ which reduces the N₂ concentration. The decrease in N₂ is least at lower O₂ concentrations and since oxygen is typically consumed during incubations of sediment cores, the result is often a pseudo-increase in N₂ concentration being interpreted as denitrification activity. The magnitude of this ocygen effect may be instrument specific. The reaction of O₂ with N₂ and the subsequent decrease in N₂ was only partly correctly using an O₂ correction curve for the relationship between N₂ and O₂ concentrations. The O₂ corrected N₂∶Ar denitrification rates were lower, but still did not match the isotope pairing rates and the variability between replicates was much higher. Using a copper reduction column heated to 600°C to remove all of the O₂ from the sample before MIMS analysis resulted in comparable rates (slightly lower), and comparable variability between replicates, to the isotope pairing technique. The N₂:Ar technique determines the net N₂ production as the difference between N₂ production by denitrification and N₂ consumption by N-fixation, while N-fixation has little effect on the isotope pairing technique which determines a rate very close to the gross N₂ production. When the two different techniques were applied on the same sediment, the small difference in rates obtained by the two methods seemed to reflect N-fixation as also supported from measurements of ethylene production in acetylene enriched sediment cores. The N₂:Ar and isotope pairing techniques may be combined to provide simultaneous measurements of denitrification and N-fixation. Both techniques have several assumptions that must be met to achieve accurate rates; a number of tests are outlined that can be applied to demonstrate that these assumptions are being meet.     

Representation of Uncertainty and Integration of PGIS-based Grazing Intensity Maps Using Evidential Belief Functions

In a project to classify livestock grazing intensity using participatory geographic information systems (PGIS), we encountered the problem of how to synthesize PGIS-based maps of livestock grazing intensity that were prepared separately by local experts. We investigated the utility of evidential belief functions (EBFs) and Dempster's rule of combination to represent classification uncertainty and integrate the PGIS-based grazing intensity maps. These maps were used as individual sets of evidence in the application of EBFs to evaluate the proposition that " This area or pixel belongs to the high, medium, or low grazing intensity class because the local expert(s) says (say) so ". The class-area-weighted averages of EBFs based on each of the PGIS-based maps show that the lowest degree of classification uncertainty is associated with maps in which "vegetation species" was used as the mapping criterion. This criterion, together with local landscape attributes of livestock use may be considered as an appropriate standard measure for grazing intensity. The maps of integrated EBFs of grazing intensity show that classification uncertainty is high when the local experts apply at least two mapping criteria together. This study demonstrates the usefulness of EBFs to represent classification uncertainty and the possibility to use the EBF values in identifying and using criteria for PGIS-based mapping of livestock grazing intensity.     

Photoionized Regions Around Supernova Remnants

The radiation produced by the gas cooling behind a fast supernova remnant shock in the interstellar medium is capable of ionizing the undisturbed medium ahead of the shock wave. In this work I investigate the nonequilibrium evolution of these photoionized precursor regions by means of radiation-hydrodynamic simulations of supernova remnant evolution. This revised version was published online in September 2006 with corrections to the Cover Date.     

A submillimetre survey of the kinematics of the Perseus molecular cloud – I. Data

We present submillimetre observations of the   J = 3 → 2  rotational transition of ¹²CO, ¹³CO and C¹⁸O across over 600 arcmin² of the Perseus molecular cloud, undertaken with the Heterodyne Array Receiver Programme (HARP), a new array spectrograph on the James Clerk Maxwell Telescope. The data encompass four regions of the cloud, containing the largest clusters of dust continuum condensations: NGC 1333, IC348, L1448 and L1455. A new procedure to remove striping artefacts from the raw HARP data is introduced. We compare the maps to those of the dust continuum emission mapped with the Submillimetre Common-User Bolometer Array (SCUBA; Hatchell et al.) and the positions of starless and protostellar cores (Hatchell et al.). No straightforward correlation is found between the masses of each region derived from the HARP CO and SCUBA data, underlining the care that must be exercised when comparing masses of the same object derived from different tracers. From the ¹³CO/C¹⁸O line ratio the relative abundance of the two species  ([¹³CO]/[C¹⁸O]∼ 7)  and their opacities (typically τ is 0.02–0.22 and 0.15–1.52 for the C¹⁸O and ¹³CO gas, respectively) are calculated. C¹⁸O is optically thin nearly everywhere, increasing in opacity towards star-forming cores but not beyond  τ₁₈∼ 0.9  . Assuming the ¹²CO gas is optically thick, we compute its excitation temperature, T _ex (around 8–30 K), which has little correlation with estimates of the dust temperature.     

The rate of grain release by pore-ice sublimation in cold-aeolian environments

Pore‐ice sublimation is a prerequisite for aeolian activity in cold environments where surface sediments hold significant amounts of frozen water. Few quantitative studies have defined the rate of grain release from cemented surfaces by pore‐ice sublimation. In 1996–1997, controlled field experiments at Presqu'ile Beach, Ontario, were implemented to measure sediment release from frozen surfaces. The release rates were compared to the local wind regime, ambient temperature and humidity. In additional field experiments, the effect of sediment water content on grain release by sublimation was examined. From the experimental results, an equation which predicts grain release based on local wind speed, ground temperature, humidity, and surface water content is proposed. Predicted release rates show reasonable agreement with natural deflation measured on the beach at Presqu'ile Provincial Park.     

New Modes of Environmental Governance in Greater Sage-Grouse Conservation in Oregon

Abstract

Natural resource challenges often span administrative jurisdictions and include actors and processes operating at different spatial and political scales. We applied concepts of new environmental governance to analyze Oregon’s approach to greater sage-grouse conservation. Through one in-depth case study in Lake County, we traced features of new environmental governance (cross-scale interactions, decentralization, and capacities of actors) through different governance levels. Interviews and qualitative analysis revealed that decentralization of administrative functions facilitated cross-scale interactions and relied on intermediaries, gap-filling, and perceptions of legitimacy at lower levels. State and agency guidelines steered the effort and were accompanied by financial and technical resources from multiple arenas, which increased local capacity. This study adds to the understandings of environmental governance for implementing multi-actor, multi-level conservation arrangements in resource-dependent communities. Further exploration of connections between higher levels and local contexts will reveal important, new ways to link policies with on-the-ground outcomes.