A fluid inclusion and light element stable isotope study of the gold-bearing quartz vein system,Falun, Sweden

The Falun gold quartz vein mineralization is located ca 230 km NW of Stockholm, Sweden, within the Early Proterozoic volcano-sedimentary sequence of Bergslagen. The mineralization consists of a system with subparallel quartz veins that crosscut the alteration zone to the Falun massive sulphide deposit. Early barren and late gold-bearing quartz veins follow tectonic structures postdating the formation of the massive sulphide ore. Both generations of veins are epigenetic to the massive sulphide ore and were formed by hydrothermal processes. Fluid inclusion study of the gold-bearing quartz veins indicates a low-moderately saline fluid (0.3 to 17.4 equiv wt% NaCl). Heterogeneous trapping is indicated by coexisting inclusions showing a variable CO₂ content from 100% CO₂ ± CH₄ to 100% aqueous fluid. Temperatures of total homogenization also show a wide spread from 116–350°C with a slightly bimodal distribution with peaks at ca 180°C and 280°C. MeasuredδD values — 69 to — 63%0 (SMOW), of inclusion fluid and calculatedδ ¹⁸O values of hydrothermal fluids — 7.5 to — 1.4%0 (SMOW), strongly suggest a meteoric origin for the fluids. The quite consistentδD values and the range inδ ¹⁸O values indicate that major water-rock interaction led to the evolution inδ18O of the hydrothermal fluids.     

http://www.sciencedirect.com/science/article/pii/S1674987112000357

Field and remote sensing studies reveal that Au-bearing quartz±carbonate lodes in Romite deposit,in the extreme South Eastern Desert of Egypt,are controlled by NNE-striking shear zones that splay from the ca.660—550 Ma Hamisana Zone.Quartz in releasing bends with sinistral shear geometry and abundant boudinaged quartz-carbonate lodes with serrate ribboned fabrics suggest vein formation throughout a transpressive wrench system.Ubiquitous hydrothermal quartz,carbonate,and subordinate chlorite and sericite within the shear zones and as slivers in veins,indicate that gold deposition and hydrothermal alteration occurred under greenschist fades conditions.The Al（Ⅳ） in chlorite indicates a formation temperature of～300℃.comparable with temperatures estimated from arsenopyrite composition for grains intimately associated with gold in quartz veins. The new geological and geochemical data indicate that splays off the Hamisana Zone are potential gold exploration targets.Quartz veins along the high order（2nd or 3rd） structures of this crustal-scale shear zone are favorable targets.In the Romite deposit and in surrounding areas,a Au-As-Cu-Sb-Co-Zn geochemical signature characterizes mineralized zones,and particularly rock chips with>1000 ppm As and high contents of Cu,Zn,and Co target the better mineralized areas. The carbonateδ¹³C_pdb andδ¹⁸O_Smow isotope signatures preclude an organic source of the ore fluid,but metamorphic and magmatic sources are still valid candidates.The intense deformation and lack of magmatism in the deposit area argue for metamorphic dewatering of greenstone rocks as the most likely fluid source.The narrow ranges ofδ¹³C（-4.6‰to -3.1‰） andδ¹⁸O（11.9‰-13.7‰） in carbonate minerals in lodes imply a corresponding uniformity to the ambient temperature andδ¹³C_CO2(δ¹³C_∑C) of the ore fluids. The calculatedδ¹⁸Oh₂o values of 6.9‰—7.9‰for ore fluids,based onδ¹⁸O values of vein quartz further suggest a likely metamorphic origin.     

Geology and Metallogenesis of the Sawayaerdun Gold Deposit in the Southwestern Tianshan Mountains, Xinjiang, China

The Sawayaerdun gold deposit, located in Wuqia County, Southwest Tianshan, China, occurs in Upper Silurian and Lower Devonian low‐grade metamorphic carbonaceous turbidites. The orebodies are controlled by a series of NE‐NNE‐trending, brittle–ductile shear zones. Twenty‐four gold mineralized zones have been recognized in the Sawayaerdun ore deposit. Among these, the up to 4‐km‐long and 200‐m wide No. IV mineralized zone is economically the most important. The average gold grade is 1–6 g/t. Gold reserves of the Sawayaerdun deposit have been identified at approximately 37 tonnes and an inferred resource of 123 tonnes. Hydrothermal alteration is characterized by silicification, pyritization, arsenopyritization, sericitization, carbonatization and chloritization. On the basis of field evidence and petrographic analysis, five stages of vein emplacement and hydrothermal mineralization can be distinguished: stage 1, early quartz stage, characterized by the occurrence of quartz veins; stage 2, arsenopyrite–pyrite–quartz stage, characterized by the formation of auriferous quartz veinlets and stockworks; stage 3, polymetallic sulfide quartz stage, characterized by the presence of auriferous polymetallic sulfide quartz veinlets and stockworks; stage 4, antimony–quartz stage, characterized by the formation of stibnite–jamesonite quartz veins; and stage 5, quartz–carbonate vein stage. Stages 2 and 3 represent the main gold mineralization, with stage 4 representing a major antimony mineralization episode in the Sawayaerdun deposit. Two types of fluid inclusion, namely H₂O–NaCl and H₂O–CO₂–NaCl types, have been recognized in quartz and calcite. Aqueous inclusions show a wide range of homogenization temperatures from 125 to 340°C, and can be correlated with the mineralization stage during which the inclusions formed. Similarly, salinities and densities of these fluids range for each stage of mineralization from 2.57 to 22 equivalent wt% NaCl and 0.76 to 1.05 g/cm³, respectively. The ore‐forming fluids thus are representative of a medium‐ to low‐temperature, low‐ to medium‐salinity H₂O–NaCl–CO₂–CH₄–N₂ system. The δ³⁴S_CDT values of sulfides associated with mineralization fall into a narrow range of ?3.0 to +2.6‰ with a mean of +0.1‰. The δ¹³C_PDB values of dolomite and siderite from the Sawayaerdun gold deposit range from ?5.4 to ?0.6‰, possibly reflecting derivation of the carbonate carbon from a mixed magmatic/sedimentary source. Changes in physico‐chemical conditions and composition of the hydrothermal fluids, water–rock exchange and immiscibility of hydrothermal fluids are inferred to have played important roles in the ore‐forming process of the Sawayaerdun gold–antimony deposit.     

Geology and Genesis of Orogenic Gold Deposits,Xiaoqinling District,Southeastern China

Orogenic gold vein deposits in the Xiaoqinling district are situated in a basement-cored uplift along the southern margin of the North China craton. The deposits are hosted by Late Archean to Paleoproterozoic amphibolite-facies country rocks, varying in lithology from clastic and chemical sedimentary units to felsic and mafic volcanic rocks and plutons. Absolute and relative age relationships indicate a late Mesozoic emplacement of the lodes, which is subsequent to the deformation associated with the Middle to Late Triassic Qinling orogen along the craton margin. All auriferous quartz veins are hosted in faults. The ores are generally composed of quartz veins with various amounts of pyrite, galena, chalcopyrite, sphalerite, and carbonates. Mineralization can be separated into three distinct stages.

Ore fluids are H₂O dominant, with approximately 20 to 30 and 10 to 20 mole% CO₂ for gold-bearing stage I and II veins, respectively. Vein formation pressures and temperatures were 2.2 kbar and 300 to 370°C for stage I and 1.6 kbar and 250 to 320°C for stage II. The narrow range of δ¹⁸O values for ore fluids from the deposits throughout the Xiaoqinling district indicate a common deep fluid source, most likely of magmatic origin. The ³⁴S data suggest sulfur originated from a magmatic fluid of approximately 2 ± 2%, with significant local sulfur contributions leading to large variations in the ore-stage sulfide minerals. The most probable mechanism for the deposition of gold is phase separation caused by the partial loss of volatiles such as CO₂ and CH₄.     

Geology, mineralization, and geochronology of the Qianhe gold deposit, Xiong’ershan area, southern North China Craton

The Qianhe gold deposit in the Xiong’ershan area is located along the southern margin of the Archean-Paleoproterozoic North China Craton. The deposit consists of six orebodies that are hosted in Paleoproterozoic andesites to basaltic andesites and structurally controlled by roughly EW-trending faults. Individual orebodies comprise auriferous quartz veins and disseminated Au-bearing pyrite within hydrothermally altered rocks on both sides of, or close to, the veins. Ore-related hydrothermal alteration has produced various mixtures of K-feldspar, quartz, sericite, chlorite, epidote, carbonate, and sulfides. Pyrite is the most important ore mineral, associated with minor amounts of galena, sphalerite, and chalcopyrite. Other trace minerals include molybdenite, arsenopyrite, scheelite, rutile, xenotime, and parisite. Gold occurs mostly as native gold and electrum enclosed in pyrite or along microfractures of sulfides and quartz. Microthermometric measurements of primary inclusions in auriferous quartz suggest that gold and associated minerals were precipitated in the range of 160–305 °C from aqueous or carbonic-aqueous fluids with salinities of 6–22 wt% NaCl equiv. Samples of molybdenite coexisting with Au-bearing pyrite have Re–Os model ages of 134–135 Ma, whereas ore-related hydrothermal sericite separates yield ⁴⁰Ar/³⁹Ar plateau ages between 127 and 124 Ma. The Re–Os and ⁴⁰Ar/³⁹Ar ages are remarkably consistent with zircon U–Pb ages (134.5?±?1.5 and 127.2?±?1.4 Ma; 1σ) of the biotite monzogranite from the Heyu-intrusive complex and granitic dikes in and close to the Qianhe gold mine, indicating a close temporal and thus possibly genetic relationship between gold mineralization and granitic magmatism in the area. Fluid inclusion waters extracted from auriferous quartz have δD values of ?80 to ?72 ‰, whereas the calculated δ ¹⁸O_H2O values range from 3.1 to 3.8 ‰. The hydrogen and oxygen isotopes from this study and previous work indicate that ore fluids were likely derived from degassing of magmas, with addition of minor amounts of meteoric water. Gold mineralization at Qianhe is temporarily coincident with pervasive bimodal magmatism, widespread fault-basin formation, and well development of metamorphic core complexes in the whole eastern North China Craton that have been interpreted as reflecting reactivation of the craton in the late Mesozoic after prolonged stabilization since its formation in the late Paleoproterozoic. It is therefore concluded that the Qianhe gold deposit formed as a result of this craton reactivation event.     

Characteristics of Triassic epithermal Au mineralization at the Q prospect,Chatree mining area,Central Thailand

The Chatree deposit is located in the Loei‐Phetchabun‐Nakhon Nayok volcanic belt that extends from Laos in the north through central and eastern Thailand into Cambodia. Gold‐bearing quartz veins at the Q prospect of the Chatree deposit are hosted within polymictic andesitic breccia and volcanic sedimentary breccia. The orebodies of the Chatree deposit consist of veins, veinlets and stockwork. Gold‐bearing quartz veins are composed mainly of quartz, calcite and illite with small amounts of adularia, chlorite and sulfide minerals. The gold‐bearing quartz veins were divided into five stages based on the cross‐cutting relationship and mineral assemblage. Intense gold mineralization occurred in Stages I and IV. The mineral assemblage of Stages I and IV is characterized by quartz–calcite–illite–laumontite–adularia–chlorite–sulfide minerals and electrum. Quartz textures of Stages I and IV are also characterized by microcrystalline and flamboyant textures, respectively. Coexistence of laumontite, illite and chlorite in the gold‐bearing quartz vein of Stage IV suggests that the gold‐bearing quartz veins were formed at approximately 200°C. The flamboyant and brecciated textures of the gold‐bearing quartz vein of Stage IV suggest that gold precipitated with silica minerals from a hydrothermal solution that was supersaturated by boiling. The δ¹⁸O values of quartz in Stages I to V range from +10.4 to +11.6‰ except for the δ¹⁸O value of quartz in Stage IV (+15.0‰). The increase in δ¹⁸O values of quartz at Stage IV is explained by boiling. P_H2O is estimated to be 16 bars at 200°C. The f_CO2 value is estimated to be 1 bar based on the presence of calcite in the mineral assemblage of Stage IV. The total pressure of the hydrothermal solution is approximately 20 bars at 200°C, suggesting that the gold‐bearing quartz veins of the Q prospect formed about 200 m below the paleosurface.     

Genesis of the Ciemas Gold Deposit and Relationship with Epithermal Deposits in West Java, Indonesia: Constraints from Fluid Inclusions and Stable Isotopes

The Ciemas gold deposit is located in West Java of Indonesia,which is a Cenozoic magmatism belt resulting from the Indo-Australian plate subducting under the Eurasian plate.Two different volcanic rock belts and associated epithermal deposits are distributed in West Java:the younger late Miocene-Pliocene magmatic belt generated the Pliocene-Pleistocene epithermal deposits,while the older late Eocene-early Miocene magmatic belt generated the Miocene epithermal deposits.To constrain the physico-chemical conditions and the origin of the ore fluid in Ciemas,a detailed study of ore petrography,fluid inclusions,laser Raman spectroscopy,oxygen-hydrogen isotopes for quartz was conducted.The results show that hydrothermal pyrite and quartz are widespread,hydrothermal alteration is well developed,and that leaching structures such as vuggy rocks and extension structures such as comb quartz are common.Fluid inclusions in quartz are mainly liquid-rich two phase inclusions,with fluid compositions in the NaCl-H20 fluid system,and contain no or little CO_2.Their homogenization temperatures cluster around 240℃-320℃,the salinities lie in the range of 14-17 wt.%NaCl equiv,and the calculated fluid densities are 0.65-1.00 g/cm~3.The values of δ~(18)O_(H2O-VSMOW)for quartz range from +5.5‰ to +7.7‰,the δD_(VSMOW) of fluid inclusions in quartz ranges from-70‰ to-115‰.All of these data indicate that mixing of magmatic fluid with meteoric water resulted in the formation of the Ciemas deposit.A comparison among gold deposits of West Java suggests that Miocene epithermal ore deposits in the southernmost part of West Java were more affected by magmatic fluids and exhibit a higher degree of sulfldation than those of Pliocene-Pleistocene.     

Fluid Inclusion, Rare-Earth Element and Stable Isotope Study of Carbonate Minerals from the Pongkor Epithermal Gold–Silver Deposit, West Java, Indonesia

The Pongkor gold–silver deposit is the largest low‐sulfidation epithermal precious metal deposit in Indonesia, and is of Pliocene age. The deposit consists of nine major subparallel quartz–adularia–carbonate veins with very low sulfide content. Vein infill records five paragenetic sequences, dominated by calcite in the early stage and quartz in the later stage of the hydrothermal evolution. Fluid inclusions in hydrothermal calcite and quartz of all stages indicate a temperature ranging from 180 to 220°C and a meteoric water origin (very low salinity close to 0 wt% NaCl equivalent). Carbon isotope data on calcite display a narrow range from ?6.5 to ?3.0‰δ¹³C. The oxygen isotope values have a wider range of +4.6 to +10.1‰δ¹⁸O. The broadly positive correlation of the δ¹³C versus δ¹⁸O plot suggests that the carbon species, which equilibrated during the formation of calcite, is dominated by H₂CO₃ not far from equilibrium with HCO₃^?. The abundance of rare earth and yttrium (REY) in carbonate samples is very low (>REY mostly <2 ppm). However, there is always a positive Eu anomaly, which indicates a deeper fluid reservoir at >250°C.     

Yerranderie a Late Devonian Silver–Gold–Lead Intermediate Sulfidation Epithermal District, Eastern Lachlan Orogen, New South Wales, Australia

Felsic volcanic units of the Early Devonian Bindook Volcanic Complex host the Yerranderie epithermal silver–gold–lead district 94 km west–southwest of Sydney. Mineralization in the district forms part of a fault‐controlled, intermediate sulfidation, epithermal silver–gold–base metal vein system that has significant mineral and alteration zonation. Stage 1 of the mineral paragenesis in the veins developed quartz and carbonate with early pyrite, whereas stage 2 is a crustiform banded quartz–pyrite–arsenopyrite assemblage. Stage 3, the main stage of sulfide deposition, comprises early sphalerite, followed by a tetrahedrite–tennantite–gold assemblage, then a galena–chalcopyrite–native silver–pyrite assemblage, and finally a pyrargyrite–polybasite–pearceite assemblage. Stage 4 involves the deposition of quartz veins with minor (late) pyrite and stage 5 is characterized by siderite that infilled remaining voids. Mineral zonation occurs along the Yerranderie Fault, with bornite being restricted to the Colon Peaks–Silver Peak mine area, whereas arsenopyrite, which is present in both the Colon Peaks–Silver Peak and Wollondilly mine areas, is absent in other lodes along the Yerranderie Fault. The Yerranderie Fault, which hosts the major lodes, is surrounded by a zoned alteration system. With increasing proximity to the fault the intensity of alteration increases and the alteration assemblage changes from an outer quartz–muscovite–illite–(ankerite) assemblage to a quartz–illite–(pyrite–carbonate) assemblage within meters of the fault. ⁴⁰Ar/³⁹Ar dating of muscovite from the alteration zone gave a 372.1 ± 1.9 Ma (Late Devonian) age, which is interpreted to be the timing of the quartz–sulfide vein formation. Sulfur isotope values for sulfides range from 0.1 to 6.2‰ with one outlier of ?5.6 δ³⁴S‰. The results indicate that the initial ore‐forming fluids were reduced, and that sulfur was probably sourced from a magmatic reservoir, either as a direct magmatic contribution or indirectly through dissolution and recycling of sulfur from the host volcanic sequence. The sulfur isotope data suggest the system is isotopically zoned.     

Genesis of the Bangbu Orogenic Gold Deposit,Tibet: Evidence from Fluid Inclusion,Stable Isotopes,and Ar-Ar Geochronology

The Bangbu gold deposit is a large orogenic gold deposit in Tibet formed during the AlpineHimalayan collision. Ore bodies(auriferous quartz veins) are controlled by the E-W-trending Qusong-Cuogu-Zhemulang brittle-ductile shear zone. Quartz veins at the deposit can be divided into three types: pre-metallogenic hook-like quartz veins, metallogenic auriferous quartz veins, and postmetallogenic N-S quartz veins. Four stages of mineralization in the auriferous quartz veins have been identified:(1) Stage S1 quartz+coarse-grained sulfides,(2) Stage S2 gold+fine-grained sulfides,(3) Stage S3 quartz+carbonates, and(4) Stage S4 quartz+ greigite. Fluid inclusions indicate the oreforming fluid was CO_2-N_2-CH_4 rich with homogenization temperatures of 170–261°C, salinities 4.34–7.45 wt% Na Cl equivalent. δ~(18)Ofluid(3.98‰–7.18‰) and low δDV-SMOW(-90‰ to-44‰) for auriferous quartz veins suggest ore-forming fluids were mainly metamorphic in origin, with some addition of organic matter. Quartz vein pyrite has δ~(34)SV-CDT values of 1.2‰–3.6‰(an average of 2.2‰), whereas pyrite from phyllite has δ~(34)SV-CDT 5.7‰–9.9‰(an average of 7.4‰). Quartz vein pyrites yield 206Pb/204 Pb ratios of 18.662–18.764, 207Pb/204 Pb 15.650–15.683, and ~(208)Pb/204 Pb 38.901–39.079. These isotopic data indicate Bangbu ore-forming materials were probably derived from the Langjiexue accretionary wedge. 40Ar/39 Ar ages for sericite from auriferous sulfide-quartz veins yield a plateau age of 49.52 ± 0.52 Ma, an isochron age of 50.3 ± 0.31 Ma, suggesting that auriferous veins were formed during the main collisional period of the Tibet-Himalayan orogen(~65–41 Ma).     

Recognition of Yanshanian magmatic-hydrothermal gold and polymetallic gold mineralization in the Laowan gold metallogenic belt,Tongbai Mountains: New evidence from structural controls,geochronology and geochemistry

The Laowan metallogenic belt in China is an important metallogenic belt within the Tongbai orogenic belt, and contains the medium-sized Laowan and Shangshanghe gold deposits, the small Huangzhuyuan lead–zinc–silver–gold deposit and some gold and Cu–Pb occurrences. These deposits are hosted in Mesoproterozoic plagioclase amphibolite (or schist) and mica-quartz schist. The gold ores are mainly quartz veins and veinlets and disseminated altered ores. Subordinate ore types include massive sulfides and breccias. The Laowan gold deposit is characterized by three right-stepping en-echelon fracture-controlled alteration zones that dip gently to the south and includes disseminated, sheeted and stockwork ores. These lodes were formed by the interaction of ore-forming fluid with foliated-to laminated cataclasite within the transpressional faults. The Shangshanghe gold deposit is characterized by parallel ore lodes that dip steeply to the north, and includes quartz veins and breccias in addition to ores in altered wallrocks. These lodes were formed by focusing of fluids into transtensional faults. These ore controlling faults displaced early barren quartz veins 10 m horizontally with a dextral sense of motion. The ore-hosting structures at the Laowan and Shangshanghe deposits correspond to the P and R-type shears of a brittle dextral strike-slip fault system, respectively, which make angles of about 15° and − 15° to the Laowan and Songpa boundary faults. The ore-controlling fault system post-dated formation of a ductile shear zone, and peak regional metamorphism. This precludes a genetic relationship between hydrothermal mineralization and regional metamorphism and ductile shear deformation. These gold deposits are not typical orogenic gold deposits. The metallogenic belt displays district-scale-zoning of Mo → Cu–Pb–Zn–Ag → Au relative to Songpa granite porphyry dike zone, suggesting the mineralization may be closely related to the granite porphyry. Measured δ³⁴S of sulfides and δ¹⁸O and δD of fluid inclusion waters in auriferous quartz also are consistent with a magmatic source for sulfur and ore fluids. The similarity of Pb isotope ratios between the ores and Yanshanian granitoids suggests a similar source. As the age (139 ± 3 Ma) of granite porphyry obtained by zircon U–Pb isotope overlaps the mineralization age (138 ± 1 Ma: Zhang et al., 2008a), the gold and polymetallic metallogenesis of the Laowan gold belt has close spatial, temporal and possibly genetic relationships with Yanshanian high level magmatism.     

Mineralogy and microchemistry of the Egat gold deposit, South Eastern Desert of Egypt

Gold-bearing quartz lodes from the Egat gold mine, South Eastern Desert of Egypt, are associated with pervasively silicified, highly sheared ophiolitic metagabbro and island-arc metavolcanic rocks. The mineralized quartz veins and related alteration haloes are controlled by NNW-trending shear/fault zones. Microscopic and electron probe microanalyses (EPMA) data of the ore and gangue minerals reveal that fine-grained auriferous sulfarsenides represent early high-temperature (355–382 °C) phases, with formation conditions as (fS₂?=??10, and fO₂ around ?31). A late, low-temperature (302–333 °C) assemblage includes coarse pyrite, arsenopyrite, and free-milling gold grains (88–91 wt.% Au), with formation conditions as (fS₂?=??8 and fO₂ around ?30). Gold was impounded within early sulfarsenides, while free-milling gold blebs occur along microfractures in quartz veins and as inclusions in late sulfides. Infiltration of hydrothermal fluids under brittle–ductile shear conditions led to mobilization of refractory Au from early sulfarsenide phases and reprecipitated free gold, simultaneous with silicification of the host rocks. The positive correlation between Au and As favors and verifies the use of As as the best pathfinder for gold targets, along the NNW-trending shear zones.     

Listvenite–lode association at the Barramiya gold mine,Eastern Desert,Egypt

Several occurrences of gold-bearing quartz veins are situated along the east–northeast-trending Barramiya–Um Salatit ophiolitic belt in the central Eastern Desert of Egypt. In the Barramiya mine, gold mineralization within carbonaceous, listvenized serpentinite and adjacent to post-tectonic granite stocks points toward a significant role of listvenitization in the ore genesis. The mineralization is related to quartz and quartz–carbonate lodes in silicified/carbonatized wallrocks. Ore minerals, disseminated in the quartz veins and adjacent wallrocks are mainly arsenopyrite, pyrite and trace amounts of chalcopyrite, sphalerite, tetrahedrite, pyrrhotite, galena, gersdorffite and gold. Partial to complete replacement of arsenopyrite by pyrite and/or marcasite is common. Other secondary phases include covellite and goethite. Native gold and gold–silver alloy occur as tiny grains along micro-fractures in the quartz veins. However, the bulk mineralization can be attributed to auriferous arsenopyrite and arsenic-bearing pyrite (with hundreds of ppms of refractory Au), as evident by electron microprobe and LA-ICP-MS analyses.The mineralized quartz veins are characterized by abundant carbonic (CO₂ ± CH₄ ± H₂O) and aqueous-carbonic (H₂O–NaCl–CO₂ ± CH₄) inclusions along intragranular trails, whereas aqueous inclusions (H₂O–NaCl ± CO₂) are common in secondary sites. Based on the fluid inclusions data combined with thermometry of the auriferous arsenopyrite, the pressure–temperature conditions of the Barramiya gold mineralization range from 1.3 to 2.4 kbar at 325–370 °C, consistent with mesothermal conditions. Based on the measured δ³⁴S values of pyrite and arsenopyrite intimately associated with gold, the calculated δ³⁴S_Σs values suggest that circulating magmatic, dilute aqueous-carbonic fluids leached gold and isotopically light sulfur from the ophiolitic sequence. As the ore fluids infiltrated into the sheared listvenite rocks, a sharp decrease in the fluid fO₂ via interaction with the carbonaceous wallrocks triggered gold deposition in structurally favorable sites.     

40^Ar／39^Ar Ages of Auriferous Quartz Veins from the Fengyang and Zhangbaling Regions and Their Geological Significance

Geotectonically the Fengyang and Zhangbaling regions belong to the North China craton and the Dabie-Sulu oragene, respectively. Neo-Archean gneiss and amphibolite and metamor-phosed sea-facies sodic volcanic rocks axe the main outcrops in the two regions, respectively. The Zhangbaling terrane strike-skipped along the Tancheng-Lujiang fault zone in Mesozoic and Cenozo-ic eras and got close to the Fengyang terrane. Mesozoic Yanshanian intrusions occur broadly in thetwo regions. Gold-beating quartz veins occur in the metamorphic rocks in the Fengyang region and in the granodiorite and metamorphosed sea-facies sodic volcanic rocks in the Zhanghaling region.Generally, the formation of the auriferous quartz veins involved three stages. At the first stage,gold-poor sulfide quartz veins were formed; at the second stage gold-rich quartz sulfide veins wereformed; and at the third stage gold-poor barite and/or carbonate veins were formed. The 40^Ar/29^Ar step-heating plateau ages of the first-stage and the second-stage quartz aggregates from the Zhuding, Maoshan and Shangeheng gold deposits range between 116.1 0.6 Ma and 118.3 0.5 Ma and are pretty close to their least apparent ages and isoehronal ages, respectively. All plat-eau, least apparent and isoehronal ages range between 113.4 0.4 Ma and 118.3 0.5 Ma,which are considered as the formation age range of the quartz. It is reasonable and reliable to takethe 40^Ar/39^Ar age range of the quartz as the formation age range of gold-bearing quartz veins onthe basis of spatial relationship between gold-bearing quartz veins and their country rocks. Thegold deposits in the two regions were formed in Aptian, Cretaceous, when the Tancheng-Lujiangfault zone moved as a normal fault with slightly right-lateral strike-skip, was extensional and expe-rienced very strong magnmtic process. It is shown that the magnmtic hydrothermal fluid is a veryimportant part of the gold ore-forming hydrothermal fluid in the Fengyang and Zhanghaling re-gions. The formation of the gold ore deposits in the Fengyang and Zhanghaling regions had genetic relations with the extensional movement of the Tancheng-Lujiang fault zone and magmatic activities and took place under the extensional dynamic condition in Late Cretaceous. Therefore, the exten-sional movement of the Tancheng-Lujiang fault zone presented the energy and space for magmatic and gold ore-forming processes.     

Geochronology of Gold Deposits and Its Implication for Metallogenesis in the Fengxian-Lixian Area, Qinling Orogenic Belt, China

Abstract: A series of super large‐scale and large‐scale Pb and Zn, and Au deposits are distributed in the Qinling orogenic belt, China. Gold deposits were generally ascribed to Carlin‐type originated from circular meteoric water. Visible and coarse‐grained gold (up to over 3mm in grain size) was recently identified in some gold deposits in the Fengxian‐Lixian area, Qinling. Au‐bearing quartz lodes related to magmatism were discovered in the Xiaogouli gold deposit. Two types of Au‐bearing quartz veins, i.e., NW‐trending quartz veins and NE‐trending quartz veins cutting strata are widely present in the Baguamiao gold deposit. Both are spatially associated with each other. The former is generally snake–like, S‐shape or zigzag, which was resulted from plastic deformation by ductile shearing, being generally cut by the latter. The latter is generally linear with widely developed bleaching alteration zones in its adjacent wall rocks, which symbolizes the superimposition of brittle deformation and filling and metasomatism of magmatic hydrothermal solution in ductile shear zones after uplifting of the shear zones near the surface. The NW‐trending quartz veins contain Au of lower than 3ppm. The NE‐trending quartz veins contain Au of more than 3 ppm, so that NE‐trending quartz veins and the adjoining altered rocks are important ores. The NW‐trending Au–bearing quartz vein was dated as 210.61.26 to 232.581.59 Ma by ⁴⁰Ar–³⁹Ar method, i.e., late Indosinian epoch (Triassic). The NE‐trending Au–bearing quartz vein was dated as 131.910.89 to 197.451.13 Ma by ⁴⁰Ar–³⁹Ar method, i.e., Yanshanian epoch (Jurassic). The ⁴⁰Ar–³⁹Ar age of the NW‐trending Au–bearing quartz veins represents the age of the ductile shear formation. The isotope data of the NE‐trending quartz veins indicate that gold mineralization was closely related to Indosinian and Yanshanian granite intrusives not only in time and space, but also in origin.     

Geology and Geochemistry of the Bianbianshan Au‐Ag‐Cu‐Pb‐Zn Deposit,Southern Da Hinggan Mountains,Northeastern China

The Bianbianshan deposit, the unique gold-polymetal (Au-Ag-Cu-Pb-Zn) veined deposit of the polymetal metallogenic belt of the southern segment of Da Hinggan Mountains mineral province, is located at the southern part of the Hercynian fold belt of the south segment of Da Hinggan Mountains mineral province, NE China. Ores at the Bianbianshan deposit occur within Cretaceous andesite and rhyolite in the form of gold-bearing quartz veins and veinlet groups containing native gold, electrum, pyrite, chalcopyrite, galena and sphalerite. The deposit is hosted by structurally controlled faults associated with intense hydrothermal alteration. The typical alteration assemblage is sericite + chlorite + calcite + quartz, with an inner pyrite - sericite - quartz zone and an outer seicite - chlorite - calcite - epidote zone between orebodies and wall rocks. δ34 S values of 17 sulfides from ores changing from –1.67 to +0.49‰ with average of –0.49‰, are similar to δ34 S values of magmatic or igneous sulfide sulfur. 206Pb/204Pb, 207Pb/204Pb and 208Pb/ 204Pb data of sulfide from ores range within 17.66–17.75, 15.50–15.60, and 37.64–38.00, respectively. These sulfur and lead isotope compositions imply that ore-forming materials might mainly originate from deep sources. H and O isotope study of quartz from ore-bearing veins indicate a mixed source of deep-seated magmatic water and shallower meteoric water. The ore formations resulted from a combination of hydrothermal fluid mixing and a structural setting favoring gold-polymetal deposition. Fluid mixing was possibly the key factor resulting in Au-Ag-Cu-Pb-Zn deposition in the deposit. The metallogenesis of the Bianbianshan deposit may have a relationship with the Cretaceous volcanic-subvolcanic magmatic activity, and formed during the late stage of the crust thinning of North China.     

Ta Nang gold deposit in the black shales of Central Vietnam

The Ta Nang gold deposit is localized in Middle Jurassic black shales. The ore zone is a series of layer-by-layer crush zones and zones of hydrothermal rock alteration, < 10 m in thickness and > 2 km in length. It consists of quartz-sulfide veins, sulfidized black shales, and their hydrothermally altered varieties. Sulfide mineralization occurs as two assemblages: early pyrite-arsenopyrite and late chalcopyrite-sphalerite- galena. The pyrite-arsenopyrite assemblage is composed of different morphogenetic varieties. Coarse-crystalline arsenopyrite and pyrite aggregates and metacrystals of different orientations, 0.1 to 10 mm in size, are the most widespread. The chalcopyrite-sphalerite-galena assemblage is scarce. Along with the main ore minerals, it includes more rare minerals: pyrrhotite, lead sulfosalts (tsugaruite), and gold, which form a spatial assemblage with the main minerals or small inclusions in them. Gold occurs mainly as fine dissemination in cracks in pyrite, arsenopyrite, chalcopyrite, and quartz. Gold content in sulfidized carbonaceous shales is no more than tenths of ppm, averaging 0.38 ppm. This content in the quartz veins is considerably higher, averaging 3.92 ppm. Silver contents in the shales and quartz veins are similar and equal to 2.68 and 5.30 ppm, respectively. Also, the sulfidized rocks and veins have elevated contents of Fe, As, Pb, Zn, Cu, Cd, Ni, and Co; most of these elements (Fe, As, Pb, Zn, and Cu) make up their own sulfide minerals, and the others are trace elements. According to ³⁹Ar/⁴⁰Ar dating of sericite from the quartz-sulfide veins, their age is 129.3 ± 5.6 Ma, which is close to the age of the Cretaceous granite intrusions of the Deo Ca complex. These veins formed from moderately strong solutions (11.7-6.4 wt.% NaCl equiv) with the CH₄ + N₂ + CO₂ gas phase at 340–130 °C. Judging from the S isotope composition (5³⁴S = 1.6-4.3%c), predominantly deep-seated endogenic sulfur participated in the formation of ore sulfide associations. Analysis of the distribution of gold shows that it was deposited together with sulfide minerals (galena, sphalerite, and chalcopyrite) at a later stage.     

Porphyry-Style Petropavlovskoe Gold Deposit,the Polar Urals: Geological Position,Mineralogy, and Formation Conditions

Geological and structural conditions of localization, hydrothermal metasomatic alteration, and mineralization of the Petropavlovskoe gold deposit (Novogodnenskoe ore field) situated in the northern part of the Lesser Ural volcanic–plutonic belt, which is a constituent of the Middle Paleozoic island-arc system of the Polar Urals, are discussed. The porphyritic diorite bodies pertaining to the late phase of the intrusive Sob Complex play an ore-controlling role. The large-volume orebodies are related to the upper parts of these intrusions. Two types of stringer–disseminated ores have been revealed: (1) predominant gold-sulfide and (2) superimposed low-sulfide–gold–quartz ore markedly enriched in Au. Taken together, they make up complicated flattened isometric orebodies transitory to linear stockworks. The gold potential of the deposit is controlled by pyrite–(chlorite)–albite metasomatic rock of the main productive stage, which mainly develops in a volcanic–sedimentary sequence especially close to the contacts with porphyritic diorite. The relationships between intrusive and subvolcanic bodies and dating of individual zircon crystals corroborate a multistage evolution of the ore field, which predetermines its complex hydrothermal history. Magmatic activity of mature island-arc plagiogranite of the Sob Complex and monzonite of the Kongor Complex initiated development of skarn and beresite alterations accompanied by crystallization of hydrothermal sulfides. In the Early Devonian, due to emplacement of the Sob Complex at a depth of approximately 2 km, skarn magnetite ore with subordinate sulfides was formed. At the onset of the Middle Devonian, the large-volume gold porphyry Au–Ag–Te–W ± Mo,Cu stockworks related to quartz diorite porphyry—the final phase of the Sob Complex— were formed. In the Late Devonian, a part of sulfide mineralization was redistributed with the formation of linear low-sulfide quartz vein zones. Isotopic geochemical study has shown that the ore is deposited from reduced, substantially magmatic fluid, which is characterized by close to mantle values δ³⁴S = 0 ± 1‰, δ¹³C =–6 to–7‰, and δ¹⁸O = +5‰ as the temperature decreases from 420–300°C (gold–sulfide ore) to 250–130°C (gold–(sulfide)–quartz ore) and pressure decreases from 0.8 to 0.3 kbar. According to the data of microanalysis (EPMA and LA-ICP-MS), the main trace elements in pyrite of gold orebodies are represented by Co (up to 2.52 wt %), As (up to 0.70 wt %), and Ni (up to 0.38 wt %); Te, Se, Ag, Au, Bi, Sb, and Sn also occur. Pyrite of the early assemblages is characterized by high Co, Te, Au, and Bi contents, whereas the late pyrite is distinguished by elevated concentrations of As (up to 0.7 wt %), Ni (up to 0.38 wt %), Se (223 ppm), Ag (up to 111 ppm), and Sn (4.4 ppm). The minimal Au content in pyrite of the late quartz–carbonate assemblage is up to 1.7 ppm and geometric average is 0.3 ppm. The significant correlation between Au and As (furthermore, negative–0.6) in pyrite from ore of the Petropavlovskoe deposit is recorded only for the gold–sulfide assemblage, whereas it is not established for other assemblages. Pyrite with higher As concentration (up to 0.7 wt %) is distinguished only for the Au–Te mineral assemblage. Taking into account structural–morphological and mineralogical–geochemical features, the ore–magmatic system of the Petropavlovskoe deposit is referred to as gold porphyry style. Among the main criteria of such typification are the spatial association of orebodies with bodies of subvolcanic porphyry-like intrusive phases at the roof of large multiphase pluton; the stockwork-like morphology of gold orebodies; 3D character of ore–alteration zoning and distribution of ore components; geochemical association of gold with Ag, W, Mo, Cu, As, Te, and Bi; and predominant finely dispersed submicroscopic gold in ore.     

Role of basement in epithermal deposits: The Kushikino and Hishikari gold deposits,southwestern Japan

The magma–ore deposit relationship of most low-sulfidation epithermal ore deposits is still unclear, partly because many stable isotopic studies of such deposits have indicated the predominance of meteoric waters within hydrothermal fluids. However, it is certainly true that hydrothermal systems are ultimately driven by magmatic intrusions, and epithermal gold deposits might therefore be produced by magmatic activity even in deposits having has no obvious links to a magma. We re-examine the genesis of two typical low-sulfidation epithermal gold deposits, the Kushikino and Hishikari deposits, using structural simulations and isotope data.Many epithermal gold deposits including the Kushikino and Hishikari deposits have been discovered in Kyushu, southwestern Japan. The Kushikino deposit comprises fissure-filling veins within Neogene andesitic volcanics that overlie unconformably Cretaceous sedimentary basement. The veins consist of gold- and silver-bearing quartz and calcite with minor amounts of adularia, sericite and sulfides. Although carbon and oxygen isotopic data for the veins indicate a meteoric origin of the ore fluid, finite element simulations suggest that the vein system might have formed in direct response to magma intrusion. In particular, geophysical data suggest that intruding magma has uplifted the basement rocks, thereby producing fractures and veins and a positive Bouguer anomaly, and providing the heat necessary to drive an ore-forming hydrothermal system.The second component of this study has been to investigate the nature and evolution of the Kushikino and Hishikari epithermal systems. Isotope data document the geochemical evolution of the hydrothermal fluids. We conclude that the existence of sedimentary basement rocks at depth might have affected the strontium and carbon isotopic ratios of the Kushikino and Hishikari ore fluids. The ⁸⁷Sr/⁸⁶Sr ratios and δ¹³C–δ¹⁸O trend reveal that major ore veins in the Hishikari deposit can be distinguished from shallow barren veins. It was suggested isotopically that fluids responsible for the barren veins in nearby shallow and barren circulation systems were only controlled by the shallow host rocks. Such multi-isotope systematics provide a powerful tool with which to determine the center of hydrothermal activity and thereby document the evolution of hydrothermal fluids.     

Gold Mineralization in Banded Iron Formation in the Amalia Greenstone Belt,South Africa: A Mineralogical and Sulfur Isotope Study

The Blue Dot gold deposit, located in the Archean Amalia greenstone belt of South Africa, is hosted in an oxide (± carbonate) facies banded iron formation (BIF). It consists of three stratabound orebodies; Goudplaats, Abelskop, and Bothmasrust. The orebodies are flanked by quartz‐chlorite‐ferroan dolomite‐albite schist in the hanging wall and mafic (volcanic) schists in the footwall. Alteration minerals associated with the main hydrothermal stage in the BIF are dominated by quartz, ankerite‐dolomite series, siderite, chlorite, muscovite, sericite, hematite, pyrite, and minor amounts of chalcopyrite and arsenopyrite. This study investigates the characteristics of gold mineralization in the Amalia BIF based on ore textures, mineral‐chemical data and sulfur isotope analysis. Gold mineralization of the Blue Dot deposit is associated with quartz‐carbonate veins that crosscut the BIF layering. In contrast to previous works, petrographic evidence suggests that the gold mineralization is not solely attributed to replacement reactions between ore fluid and the magnetite or hematite in the host BIF because coarse hydrothermal pyrite grains do not show mutual replacement textures of the oxide minerals. Rather, the parallel‐bedded and generally chert‐hosted pyrites are in sharp contact with re‐crystallized euhedral to subhedral magnetite ± hematite grains, and the nature of their coexistence suggests that pyrite (and gold) precipitation was contemporaneous with magnetite–hematite re‐crystallization. The Fe/(Fe+Mg) ratio of the dolomite–ankerite series and chlorite decreased from veins through mineralized BIF and non‐mineralized BIF, in contrast to most Archean BIF‐hosted gold deposits. This is interpreted to be due to the effect of a high sulfur activity and increase in fO₂ in a H₂S‐dominant fluid during progressive fluid‐rock interaction. High sulfur activity of the hydrothermal fluid fixed pyrite in the BIF by consuming Fe²⁺ released into the chert layers and leaving the co‐precipitating carbonates and chlorites with less available ferrous iron content. Alternatively, the occurrence of hematite in the alteration assemblage of the host BIF caused a structural limitation in the assignment of Fe³⁺ in chlorite which favored the incorporation of magnesium (rather than ferric iron) in chlorite under increasing fO₂ conditions, and is consistent with deposits hosted in hematite‐bearing rocks. The combined effects of reduction in sulfur contents due to sulfide precipitation and increasing fO₂ during progressive fluid‐rock interactions are likely to be the principal factors to have caused gold deposition. Arsenopyrite–pyrite geothermometry indicated a temperature range of 300–350°C for the associated gold mineralization. The estimated δ³⁴S_ΣS (= +1.8 to +2.5‰) and low base metal contents of the sulfide ore mineralogy are consistent with sulfides that have been sourced from magma or derived by the dissolution of magmatic sulfides from volcanic rocks during fluid migration.