Peak discharge increase in hyperconcentrated floods

The peak of river floods usually decreases in the downstream direction unless it is compensated by freshwater inflow from tributaries. In the Yellow River (China) the opposite is regularly observed, where the peak discharge of river floods increases in the downstream direction (at a rate far exceeding the contribution from tributaries). This flood peak discharge increase is probably related to rapid morphological changes, to a modified bed friction, or to a combination of both. Yet the relative role of these processes is still poorly understood. This paper aims to analyze the relative contribution of bed erosion and friction change to the peak discharge increase, based on available data and a recently developed numerical model. Using this high-resolution, fully coupled morphodynamic model of non-capacity sediment transport, two hyperconcentrated floods characterized by downstream peak discharge increase are numerically reproduced and analyzed in detail. The results reveal that although erosion effects may contribute to the downstream discharge increase (especially in case of extreme erosion), for most cases the increase must be mainly due to a reduction in bed friction during peak discharge conditions. Additionally, based on the concept of channel storage reduction, the effects of decreasing bed friction and (very strong) bed erosion can be integrated in explaining the peak discharge increase.     

BOULDERS ON THE MOVE: GEOMORPHIC HAZARDS FROM FLOODS AND DEBRIS FLOWS ALONG MOUNTAIN RIVERS

IMOUNTAINE~ON-MENTSANDSEDIMENTGeologistsandgeomorphologistsareabletomakeatleasttWoimportantcontributionstomitigatinghazardsassociatedwithsedimentprocessessuchasfloodsordebrisflows.First,geomorphologistscaninterpretgeologicrecordsofthehiStoryofseddrientprocesses.Theserecordsmayprovideinsightintothemagnitude,frequency,andlocationofsedimentsourcesandtransport,aswellashillslopeandchannelresponsestosedimentprocesses.Informationonpastsedimentproductionandmovement,andchannelresponse,mayb'…     

CHANNEL RESPONSE TO SEDIMENT WAVE PROPAGATION AND MOVEMENT,REDWOOD CREEK,CALIFORNIA, USA

Redwood Creek, north coastal California, USA, has experienced dramatic changes in channel configuration since the 1950s. A series of large floods (in 1955, 1964, 1972 and 1975) combined with the advent of widespread commercial timber harvest and road building resulted in extensive erosion in the basin and contributed high sediment loads to Redwood Creek. Since 1975, no peak flows have exceeded a 5 year recurrence interval. Twenty years of cross-sectional survey data document the downstream movement of a ‘sediment wave’ in the lower 26 km of this gravel-bedded river at a rate of 800 to 1600 m a⁻¹ during this period of moderately low flows. Higher transit rates are associated with reaches of higher unit stream power. The wave was initially deposited at a site with an abrupt decrease in channel gradient and increase in channel width. The amplitude of the wave has attenuated more than 1 m as it moved downstream, and the duration of the wave increased from eight years upstream to more than 20 years downstream. Channel aggradation and subsequent degradation have been accommodated across the entire channel bed. Channel width has not decreased significantly after initial channel widening from large (>25 year recurrence interval) floods. Three sets of longitudinal surveys of the streambed showed the highest increase in pool depths and frequency in a degrading reach, but even the aggrading reach exhibited some pool development through time. The aggraded channel bed switched from functioning as a sediment sink to a significant sediment source as the channel adjusted to high sediment loads. From 1980 to 1990, sediment eroded from temporary channel storage represented about 25 per cent of the total sediment load and 95 per cent of the bedload exported from the basin.     

MITIGATION OF SEDIMENTATION HAZARDS DOWNSTREAM FROM RESERVOIRS

1 INTRODUCTION Increasing attention is being given to sedimentation hazards downstream from reservoirs as dams built during the past century accumulate progressively greater volumes of sediment. The sediment storage both decreases reservoir capacity and operating efficiency of the dam, and creates a 搒ediment-shadow?downstream where sediment-starved flows commonly erode channel boundaries and create long-term channel instabilities. Numerous studies have documented downstream channel change…     

Late Holocene channel and floodplain development in a wandering gravel‐bed river: the River South Tyne at Lambley,northern England

Geomorphological analyses of the morphology, lithostratigraphy and chronology of Holocene alluvial fills in a 2·75 km long piedmont reach of the wandering gravel‐bed River South Tyne at Lambley in Northumberland, northern England, have identified spatial and temporal patterns of late Holocene channel and floodplain development and elucidated the relationship between reach‐ and subreach‐scale channel transformation and terrace formation. Five terraced alluvial fills have been dated to periods sometime between c. 1400 BC –AD 1100, AD 1100–1300, AD 1300–1700, AD 1700–1850 and from AD 1850 to the present. Palaeochannel morphology and lithofacies architecture of alluvial deposits indicate that the past 3000 years has been characterized by episodic channel and floodplain change associated with development and subsequent recovery of subreach‐scale zones of instability which have been fixed in neither time nor space. Cartographic and photographic evidence spanning the past 130 years suggests channel transformation can be accomplished in as little as 50 years. The localized and episodic nature of fluvial adjustment at Lambley points to the operation of subreach‐scale controls of coarse sediment transfers. These include downstream propagation of sediment waves, as well as internal controls imposed by differing valley floor morphology, gradient and boundary materials. However, the preservation of correlated terrace levels indicates that major phases of floodplain construction and entrenchment have been superimposed over locally complex patterns of sediment transfer. Reach‐scale lateral and vertical channel adjustments at Lambley appear to be closely related to climatically driven changes in flood frequency and magnitude, with clusters of extreme floods being particularly important for accomplishing entrenchment and reconfiguring the pattern of localized instability zones. Confinement of flood flows by valley entrenchment, and contamination of catchment river courses by metal‐rich fine sediments following recent historic mining operations, have combined to render the South Tyne at Lambley increasingly sensitive to changes in flood regimes over the past 1000 years. Copyright © 2000 John Wiley & Sons, Ltd.     

Width control on event-scale deposition and evacuation of sediment in bedrock-confined channels

In mixed bedrock–alluvial rivers, the response of the system to a flood event can be affected by a number of factors, including coarse sediment availability in the channel, sediment supply from the hillslopes and upstream, flood sequencing and coarse sediment grain size distribution. However, the impact of along-stream changes in channel width on bedload transport dynamics remains largely unexplored. We combine field data, theory and numerical modelling to address this gap. First, we present observations from the Daan River gorge in western Taiwan, where the river flows through a 1 km long 20–50 m wide bedrock gorge bounded upstream and downstream by wide braidplains. We documented two flood events during which coarse sediment evacuation and redeposition appear to cause changes of up to several metres in channel bed elevation. Motivated by this case study, we examined the relationships between discharge, channel width and bedload transport capacity, and show that for a given slope narrow channels transport bedload more efficiently than wide ones at low discharges, whereas wider channels are more efficient at high discharges. We used the model sedFlow to explore this effect, running a random sequence of floods through a channel with a narrow gorge section bounded upstream and downstream by wider reaches. Channel response to imposed floods is complex, as high and low discharges drive different spatial patterns of erosion and deposition, and the channel may experience both of these regimes during the peak and recession periods of each flood. Our modelling suggests that width differences alone can drive substantial variations in sediment flux and bed response, without the need for variations in sediment supply or mobility. The fluctuations in sediment transport rates that result from width variations can lead to intermittent bed exposure, driving incision in different segments of the channel during different portions of the hydrograph. © 2020 The Authors. Earth Surface Processes and Landforms published by John Wiley & Sons Ltd     

DIVERTING SEAWATER TO SCOUR THE LOWER YELLOW RIVER

1 INTRODUCTION The Lower Yellow River starts from Huayuanko and runs on a plain for about 800 km before emptying into the Bohai Sea. The river is notorious for its extremely heavy sediment load, 1.6 billion tons annually with a relatively small runoff of only 41 km3 at the river mouth. Such a huge volume of sediment is partly deposited in the channel and partly discharged through the estuary into the Bohai Sea. As the tide nearby is weak, a bulk of the sediment cannot be brought to th…     

Contribution to understanding the historical evolution of meandering rivers using dendrochronological methods: example of the Mała Panew River in southern Poland

The Ma?a Panew is a meandering river that flows 20 km through a closed forest. During times of high discharge the riverbed and floodplain are transformed under the influence of riparian trees. The changes provide the opportunity to measure the intensity of erosion and sediment accumulation based on tree ages, the dating of coarse woody debris (CWD) in the riverbed, and the dating of eccentric growth of tilting trees and exposed roots. The bed and floodplain in reaches of the Ma?a Panew River with low banks were greatly altered as a result of long periods of flooding between 1960 and 1975. Banks were undercut during these floods and black alders tilted. Those parts of alder crowns or stems which tilt and sink generate small sand shadows. When erosion is intensive alder clumps are undercut from concave banks and become mid‐channel islands, while on the other side of the channel meandering bar levels are created. The reaches with higher banks were altered by large floods, especially in 1985 and 1997. The concave banks are undercut and sediment with CWD is deposited within the riverbed, forming sand shadows behind the CWD. Copyright © 2006 John Wiley & Sons, Ltd.     

Dynamics of suspended sediment delivery to the Eastern Mediterranean continental shelf

This study provides data on the fluvial sediment transport at the Eastern Mediterranean, an area in which the regional importance for comparative study has often been raised by investigators but the data are rather scarce. We analysed long‐ and short‐term hydrologic and sedimentological data from one of the largest coastal streams of Israel, Qishon River (1100 km²), and its estuarine environment. The results indicate that during 65 years (1944–2009), a total 140 floods have contributed to the sea an amount of approximately 2.58 × 10⁶ tons of sediment. During this period, (i) the number of floods with a return period of more than 10 years has almost doubled during the last 30 years, and (ii) the mean annual discharge during last 10 years increased by approximately 175%. The analysis of the short (2 years) hydrological and sediment data revealed that approximately 30% of the upstream channel loads do not reach the river mouth and are deposited along the channel bed, even during major flood events. This observation was attributed largely to the facts that the lower river bed is incised below sea level, to the very low slopes and to the correspondingly low stream power and transport capacity. The results of this study highlight the effect of interchannel dynamics as well as the constraints of interaction between fluvial system and estuarine processes on sediment transport. Copyright © 2012 John Wiley & Sons, Ltd.     

Sedimentation of overbank floods in the confined complex channel–floodplain system of the Lower Yellow River,China

The channel boundary conditions along the Lower Yellow River (LYR) have been altered significantly since the 1950s with the continual reinforcement and construction of both main and secondary dykes and river training works. To evaluate how the confined complex channel–floodplain system of the LYR responds to floods, this study presents a detailed investigation of the relationship between the tempo‐spatial distribution of sedimentation/erosion and overbank floods occurred in the LYR. For large overbank floods, we found that when the sediment transport coefficient (ratio of sediment concentration of flow to flow discharge) is less than 0.034, the bankfull channel is subject to significant erosion, whereas the main and secondary floodplains both accumulate sediment. The amount of sediment deposited on the main and secondary floodplains is closely related to the ratio of peak discharge to bankfull discharge, volume of water flowing over the floodplains, and sediment concentration of overbank flow, whereas the degree of erosion in the bankfull channel is related to the amount of sediment deposited on the main and secondary floodplains, water volume, and sediment load in flood season. The significant increase in erosion in the bankfull channel is due to the construction of the main and secondary dykes and river training works, which are largely in a wide and narrow alternated pattern along the LYR such that the water flowing over wider floodplains returns to the channel downstream after it drops sediment. For small overbank floods, the bankfull channel is subject to erosion when the sediment transport coefficient is less than 0.028, whereas the amount of sediment deposited on the secondary floodplain is associated closely with the sediment concentration of flow. Over the entire length of the LYR, the situation of erosion in the bankfull channel and sediment deposition on the main and secondary floodplains occurred mainly in the upper reach of the LYR, in which a channel wandering in planform has been well developed.     

Suspended sediment dynamics at high and low storm flows in two small watersheds

A record spanning almost 20 years of suspended sediment and discharge measurements on two reaches of an agricultural watershed is used to assess the influence of in‐channel sediment supplies and bed composition on suspended sediment concentrations (SSC). We analyse discharge‐SSC relationships from two small streams of similar hydrology, climate and land use but widely different bed compositions (one dominated by sand, the other by gravel). Given that sand‐dominated systems have more fine sediment available for transport, we use bed composition and the relative proportion of surface sand and gravel to be representative of in‐channel sediment supply. Both high flow events and lower flows associated with onset and late recessional storm flow (‘low flows’) are analysed in order to distinguish external from in‐channel sources of sediment and to assess the relationship between low flows and sediment supply. We find that SSC during low flows is affected by changes to sediment supply, not just discharge capacity, indicated by the variation in the discharge‐SSC relationship both within and between low flows. Results also demonstrate that suspended sediment and discharge dynamics differ between reaches; high bed sand fractions provide a steady supply of sediment that is quickly replenished, resulting in more frequent sediment‐mobilizing low flow and relatively constant SSC between floods. In contrast, SSC of a gravel‐dominated reach vary widely between events, with high SSC generally associated with only one or two high‐flow events. Results lend support to the idea that fine sediment is both more available and more easily transported from sand‐dominated streambeds, especially during low flows, providing evidence that bed composition and in‐channel sediment supplies may play important roles in the mobilization and transport of fine sediment. In addition, the analysis of low‐flow conditions, an approach unique to this study, provides insight into alternative and potentially significant factors that control fine sediment dynamics. Copyright © 2007 John Wiley & Sons, Ltd.     

Two-dimensional modeling of channel evolution under the influence of large-scale river regulation works

In the middle and lower reaches of alluvial rivers, various kinds of river regulation projects affecting natural channel evolution often are distributed due to the requirements of flood control, navigation,and channel stability. However, the influence of large-scale river regulation works on fluvial processes is not fully known. Therefore, a two-dimensional(2D) morphodynamic model has been improved to address this problem. The new detailed procedure is presented in this paper:(i) First, each nod...     

Prediction and assessment of multiple glacial lake outburst floods scenario in Pho Chu River basin,Bhutan

In this study, the characteristic of multiple glacial lake outburst floods (GLOFs) in the Pho Chu River basin in Bhutanese Himalayas is evaluated to help assess the potential impact. Thorthormi Cho (TC) and Lugge Cho (LC) in the east branch and two unnamed lakes labelled A and B in the west branch of Pho Chu are chosen for the study. Numerical models were employed to simulate different involved processes. The results show that the peak sediment discharge in the east branch of the Pho Chu River by the TC dam breach reached about 5000 m³/s (during the first GLOF) at 4 km whereas by the LC dam breach is about 600 m³/s (second GLOF) at 6 km. However, the highest peak hydrographs (sediment and water mixture) calculated during the first and second GLOF are about 10 000 m³/s at the 18‐km section and about 23 000 m³/s at the 10‐km section, respectively. In the west branch of Pho Chu, erosion and depositions are the frequent intermittent local processes during the first GLOF event from Lake A. Because the first event stabilized the irregular river bed profile, there is not much sediment discharge developed during the second GLOF from Lake B. At the 17‐km section of the west branch, the peak hydrograph reached about 9000 m³/s during the first event against the peak of about 800 m³/s during the second event. The results suggest that even if multiple dam breaches occur simultaneously, GLOF surges pass through the main river channel at different times with very different flood characteristics. The differences in travel time and flood characteristics mostly depend on the distributions of bed slope and potential erosion depth along the reach. Further, the amount of sediment accumulated in and transported by each surge is reliant on the temporal geomorphologic setting of the river and therefore on the impact of the previous GLOF on riverbed profile and potential erosion depth. The robustness in peak GLOF hydrographs is associated with sediment flow dynamics. As a consequence, serious inundation of Punakha, Lobeysa and major portion of Wangdue Phodrang is anticipated. Copyright © 2011 John Wiley & Sons, Ltd.     

Morphometric and anthropogenic factors of flood risk in the Lower Kura

The morphometric and anthropogenic risk factors of floods in a typical lowland Lower Kura R. are studied. The isolation of the channel from the floodplain is the major cause of floods in the river. The high channel tortuosity makes the flow turbulent. In addition, the high sediment concentration, the turbid and disperse character of the liquid, the gentle bed slope, and the alluvial character of the soil underlying the bed and embankments contribute to the vertical and horizontal dynamics of the channel.     

Riffle‐pool morphometry and stage‐dependant morphodynamics of a large floodplain river (Vereinigte Mulde,Sachsen‐Anhalt,Germany)

Riffle‐pool sequences are a common feature of gravel‐bed rivers. However, mechanisms of their generation and maintenance are still not fully understood. In this study a monitoring approach is employed that focuses on analysing cross‐sectional and longitudinal channel geometry of a large floodplain river (Vereinigte Mulde, Sachsen‐Anhalt, Germany) with a high temporal and spatial resolution, in order to conclude from stage‐dependant morphometric changes to riffle and pool maintaining processes. In accordance with previous authors, pool cross‐sections of the Mulde River are narrow and riffle cross‐sections are wide suggesting that they should rather be addressed as two general types of channel cross‐sections than solely as bedforms. At high flows, riffles and pools in the study reaches changed in length and height but not in position. Pools were scoured and riffles aggraded, a development which was reversed during receding flows below the threshold of 0·4Q_bf (40% bankfull discharge). An index for the longitudinal amplitude of riffle‐pool sequences, the bed undulation intensity or bedform amplitude, is introduced and proved to be highly significant as a form parameter, its first derivative as a process parameter. The process of pool scour and riffle fill is addressed as bedform maintenance or bedform accentuation. It is indicated by increasing longitudinal bed amplitudes. According to the observed dynamics of bed amplitudes, maintenance of riffle‐pool sequences lags behind discharge peaks. Maximum bed amplitudes may be reached with a delay of several days after peak discharges. Increasing bed undulation intensity is interpreted to indicate bed mobility. Post‐flood decrease of the bed undulation intensity indicates a retrograde phase when transport from pools to riffles has ceased and bed mobility is restricted to riffle tails and heads of pools. This type of transport behaviour is referred to as disconnected mobility. The comparison of two river reaches, one with undisturbed sediment supply, the other with sediment deficit, suggests that high bed undulation intensity values at low flows indicate sediment deficit and potentially channel degrading conditions. It is more generally hypothesized that channel bed undulations constitute a major component of form roughness and that increased bed amplitudes are an important feature of channel bed adjustment to sediment deficit be it temporally during late floods or permanently due to a supply limitation of bedload. Copyright © 2011 John Wiley & Sons, Ltd.     

The Huanghe (Yellow) River: Recent changes and its countermeasures

Since the 1960s a series of large reservoirs have been built in the upper and middle reaches of the Huanghe River. Changes caused by these reservoirs include a decrease in flood discharge and sediment load to the lower reaches and conversely, an increase of the silt concentration in the river water. This accumulation of silt in the river channel is a serious problem in the lower Huanghe River and has caused abnormal and distorted flow courses in the river bed. These effects include: shrinkage of the river channel, frequent dewatering (i.e., zero flow) in the river-mouth area, and hanging rivers (i.e., a river channel elevated above its floodplain). The zero-flow portion of the river has gradually extended upstream for nearly the entire 700 km of the lower reach. Utilization of the floodplains for agriculture and temporary villages has become a major problem. To counter these changes and situations, new measures, new methodology, and new thinking must be adapted incorporating results from the recent works on sediment transport and accumulation. Water conservancy works (dams, pumping stations, siphon-intakes, etc.) are typically used for adjustment of river water and sediment discharges and for irrigation and hydro-power generation. Recently, they are also being used to conduct tests using the reservoir water/sediment mix to flush out sediments deposited in the channel bed and transport the sediment to places where it is needed or into the Bohai Sea. Additionally, the future of the new deltaic sub-lobe in the Bohai Sea (developed in 1996) and the present estuary needs to be considered with respect to future development.     

Minimum froude number and the equilibrium of alluvial sand rivers

Rivers adjust towards an equilibrium condition, the stability of which depends upon a set of controlling factors expressed by the Froude number. As alluvial river channels approach stable conditions, the Froude number of the channel flow will tend to attain a minimum value which reflects minimum bed material motion and maximum channel stability, under the constraints imposed by water discharge, sediment load, and particle size. Computer simulations for sand bed rivers show that the Froude number of the flow tends to a minimum value when the equilibrium river tends to a certain hydraulic geometry. Evidence from 57 alluvial sand material rivers and stable canals shows that this simulated hydraulic geometry with minimum Froude number corresponds to the natural equilibrium state.     

UAS‐based remote sensing of fluvial change following an extreme flood event

The effects of large floods on river morphology are variable and poorly understood. In this study, we apply multi‐temporal datasets collected with small unmanned aircraft systems (UASs) to analyze three‐dimensional morphodynamic changes associated with an extreme flood event that occurred from 19 to 23 June 2013 on the Elbow River, Alberta. We documented reach‐scale spatial patterns of erosion and deposition using high‐resolution (4–5 cm/pixel) orthoimagery and digital elevation models (DEMs) produced from photogrammetry. Significant bank erosion and channel widening occurred, with an average elevation change of ?0.24 m. The channel pattern was reorganized and overall elevation variation increased as the channel adjusted to full mobilization of most of the bed surface sediments. To test the extent to which geomorphic changes can be predicted from initial conditions, we compared shear stresses from a two‐dimensional hydrodynamic model of peak discharge to critical shear stresses for bed surface sediment sizes. We found no relation between modeled normalized shear stresses and patterns of scour and fill, confirming the complex nature of sediment mobilization and flux in high‐magnitude events. However, comparing modeled peak flows through the pre‐ and post‐flood topography showed that the flood resulted in an adjustment that contributes to overall stability, with lower percentages of bed area below thresholds for full mobility in the post‐flood geomorphic configuration. Overall, this work highlights the potential of UAS‐based remote sensing for measuring three‐dimensional changes in fluvial settings and provides a detailed analysis of potential relationships between flood forces and geomorphic change. Copyright © 2015 John Wiley & Sons, Ltd.     

Geomorphological effectiveness of floods to rework gravel bars: Insight from hyperscale topography and hydraulic modelling

Bars are key morphological units in river systems, fashioning the sediment regime and bedload transport processes within a reach. Reworking of these features underpins channel adjustment at larger scales, thereby acting as a key determinant of channel stability. Despite their importance to channel evolution, few investigations have acquired spatially continuous data on bar morphology and sediment-size to investigate bar reworking. To this end, four bars along a 10 km reach of a wandering gravel-bed river were surveyed with terrestrial laser scanning (TLS), comparing downstream changes in slope, bed material size and channel planform. Detrended standard deviations (σ_z) were extracted from TLS point clouds and correlated to underlying physically measured median grain-size (D₅₀), across a greater range of σ_z values than have hitherto been reported. The resulting linear regression model was used to create a 1 m resolution median grain-size map. A fusion of airborne LiDAR and optical-empirical bathymetric mapping was used to develop reach-scale digital elevation models (DEMs) for rapid two-dimensional hydraulic modelling using JFlow® software. The ratio of dimensionless shear stress over critical shear stress was calculated for each raster cell to calculate the effectiveness of a range of flood events (2.33–100 year recurrence intervals) to entrain sediment and rework bar units. Results show that multiple bar forming discharges exist, whereby frequent flood flows rework tail and back channel areas, while much larger, less frequent floods are required to mobilise the coarser sediment fraction on bar heads. Valley confinement is shown to exert a primary influence on patterns of bar reworking. Historical aerial photography, hyperscale DEMs and hydraulic modelling are used to explain channel adjustment at the reach scale. The proportion of the bar comprised of more frequently entrained units (tail, back channel, supra-platform) relative to more static units (bar head) exerts a direct influence upon geomorphic sensitivity. © 2018 John Wiley & Sons, Ltd.     

River adjustment to changes in sediment load: The effects of tin mining on the Ringarooma River,Tasmania, 1875–1984

The mining of alluvial tin in the Ringarooma basin began in 1875, reached a peak in 1900–20, and had virtually ceased by 1982. During that time 40 million m³ of mining waste were supplied to the main river, quickly replacing the natural bed material and requiring major adjustments to the channel. Based on estimates of sediment supply from more than 50 widely scattered mines and the frequency of flows capable of transporting the introduced load, the river's transport history is reconstructed using a mass-conservation model. Because of the lengthy time period (110 years) and river distance (75 km) involved, the model cannot predict detailed change but it does reproduce the main pattern of sediment movement in which successive phases of aggradation and degradation progress downstream. Peak storage is predicted in that part of the river where braiding and anastomosis are best developed. Aggradation was most rapid in the upper reaches close to major supply points, becoming slower and later with distance downstream. Channel width increased by up to 300 per cent where the valley floor was broad and braiding became relatively common. Bridges had frequently to be replaced. While bed levels were still rising in lower reaches, degradation began in upper ones, notably after 1950, and by 1984 had progressed downriver over 30 km. Rates of incision reached 0·5 m yr^?1, especially in the early 1970s when record high flows occurred. As a result of degradation the bed material became gravelly through either reexposure of the original bed or lag concentration of coarser fractions. Also a narrower unbraided channel has developed. The river is beginning to heal itself and upper reaches now have reasonably stable beds but at least another 50 years will be required for the river to cleanse its channel of mining debris.