Depositional conditions of the coal-bearing Hirka Formation beneath Late Miocene explosive volcanic products in NW central Anatolia,Turkey

This work focuses on the relationship between the coal deposition and explosive volcanism of the Miocene basin, NW central Anatolia, Turkey. The coal-bearing Hirka Formation was deposited over the Galatian Andesitic Complex and/or massive lagoonal environments during the Miocene. The investigated lignite is a high ash (from 32 to 58%) and sulphur (from 1.43 to 3.03%) lignite which is petrographically characterised by a high humunite content. The mineral matter of the studied lignite samples is made up of mainly clay minerals (illite-smectite and kaolinite), plagioclase and quartz in Bolu coal field, clay minerals (illite-smectite, smectite and illite), quartz, calcite, plagioclase and gypsum in Seben coal field, quartz, K-feldspar, plagioclase and clay minerals (kaolinite and illite) in K?br?sc?k, and dolomite, quartz, clinoptilolite, opal CT and gypsum in Çaml?dere coal field. The differences in these four types of lignite with specific mineralogical patterns may be due to the explosive volcanic events and depositional conditions which changed from one coal field to the others. There is a zonation from SW to SE in the studied area for zeolites such as Opal CT+smectite-clinoptilolite-analcime-K-feldspar. Carbonate minerals are commonly calcite in Seben and K?br?sc?k coal fields. In Bolu, coal samples are devoid of calcite and dolomite. These analyses show that there is an increase in the amount of Mg and a decrease in the amount of Na from the northwestern part to the southern part in the study area.     

X射线粉晶衍射仪在大理岩鉴定与分类中的应用

大理岩主要有方解石大理岩、白云石大理岩和菱镁矿大理岩三种。以往大理岩是依据偏光显微镜下观察岩石结构构造及矿物成分进行分类定名,由于方解石、白云石、菱镁矿都属于三方晶系,具有闪突起、高级白干涉色、一轴晶负光性和菱形解理等相同晶体光学特征,偏光显微镜下区分十分困难。为了准确鉴定大理岩中碳酸盐矿物种类及其相对含量,本文利用岩石薄片偏光显微镜和X射线粉晶衍射技术对32件大理岩岩石样品进行分析测试。岩石薄片鉴定结果表明:大理岩造岩矿物主要有方解石、白云石、菱镁矿、石英、斜长石、白云母、黑云母、绿泥石、黏土和金属矿物。根据岩石结构构造及矿物组分特征,可把32件大理岩样品划分为方解石大理岩、长英质方解石大理岩、石英绿泥白云石大理岩、白云石大理岩、云英质白云石大理岩和菱镁矿大理岩等15个类型。X射线粉晶衍射分析表明:大理岩造岩矿物主要有方解石、白云石、菱镁矿、石英、斜长石、钾长石、云母、绿泥石、滑石和蒙脱石。综合分析认为:岩石薄片偏光显微镜鉴定技术很难区分方解石、白云石和菱镁矿等碳酸盐矿物,以及细小的石英、钾长石和斜长石、滑石和白云母等鳞片状硅酸盐矿物;X射线粉晶衍射分析技术不仅能准确检测出大理岩中方解石、白云石和菱镁矿等碳酸盐矿物种类及相对含量(方解石、白云石和菱镁矿的X射线衍射主峰有明显差异,d值分别为0.303 nm、0.288 nm和0.274 nm),而且能够有效鉴别岩石中粉砂级斜长石、钾长石与石英(三种矿物的X射线衍射主峰d值分别为0.319 nm、0.324 nm、0.334 nm);且能区分蒙脱石、绿泥石、云母和滑石等层状硅酸盐矿物(四种硅酸盐矿物的X射线衍射主峰d值分别为1.400 nm、0.705 nm、0.989 nm、0.938 nm)。综合岩石薄片偏光显微镜鉴定和X射线粉晶衍射分析结果,最终确定32件大理岩样品划分为22个岩石类型。研究认为:仅根据岩石薄片偏光显微镜鉴定或X射线粉晶衍射技术其中一种方法不能准确鉴定大理岩岩石,应将大理岩岩石野外观察、岩石薄片鉴定和X射线粉晶衍射技术结合起来,才能准确确定大理岩岩石类型。     

国产香烟矿物组成的初步研究

利用X射线衍射仪对28种国产香烟烟灰及其中的两种香烟(绿南京和云烟)的卷烟纸灰烬、烟丝以及过滤嘴中的矿物成分进行了研究.初步研究结果表明,香烟烟丝中含有一水草酸钙石,过滤嘴中不含任何矿物,烟灰中的矿物主要是方解石,此外还含有少量石英、钾盐、钾矾、石膏等矿物.这些矿物具有不同的来源:方解石来自卷烟纸,一水草酸钙石是烟叶生长期间自身合成的矿物,石膏是香烟燃烧过程中新形成的矿物.这些研究结果有可能为全面认识香烟致病机理提供一定的科学依据.     

The weathering of norite at Black Hill,South Australia

Black Hill is a boulder‐strewn residual of norite standing 45 m above the Murray Plains about 80 km northeast of Adelaide. Between the boulders, the crystalline rock has weathered to a dark‐brown terra rossa‐rendzina soil with calcite, illite, kaolin, and hematite as the principal secondary minerals. At one site on the smooth lower slopes of the outcrop, the material above the norite consists of partially weathered granular fragments with considerable dolomite and some calcite in nodular form. Below the surface, the rock has been weathered along joints to produce the clay mineral nontronite, and between each corestone and this plastic clay there is a zone of laminated but essentially unaltered rock 10–25 cm thick. Pieces of amorphous silica occur sporadically in some joints and on the surface.

The dark‐brown soil appears to be related to the present environment but the nontronite in the joint weathering, the dolomite, and the amorphous silica are all consistent with the norite having been inundated, possibly during the Miocene marine transgression.

Calculations based on the retention of elements such as aluminium, potassium, titanium, and iron have been used to predict quantitatively the amount of certain minerals such as quartz, calcite, and dolomite introduced to the weathering profiles.     

Effectiveness of various dispersed alkaline substrates for the pre-treatment of ferriferous acid mine drainage

Dispersed alkaline substrates (DAS) have been successfully used in passive treatment of highly contaminated acid mine drainage (AMD) to limit coating and clogging issues. However, further optimization of DAS systems is still needed, especially for their long-term efficiency during the treatment of ferriferous AMD. In the present study, three types of DAS comprised of natural alkaline materials (wood ash, calcite, dolomite), in different proportions (20%v/v, 50%v/v, 80%v/v), and a substrate with high surface area (wood chips) were tested in 9 batch reactors. The testing was carried out, in duplicate, for a period of 91 days, to evaluate the comparative performance of the mixtures for iron pre-treatment in ferriferous AMD (2500 mg/L Fe, at pH 4). Results showed increasing of pH (between 4.15 and 7.12), regardless of the proportion of alkaline materials in the DAS mixtures. Among the tested mixtures, wood ash type DAS were more effective for Fe removal (99.9%) than calcite or dolomite type DAS (up to 66%). All tested DAS had limited efficiency for sulfate removal and an additional treatment unit, such as a sulfate-reducing biochemical reactor, is needed. Moreover, due to the similar performances of the calcite and dolomite DAS, they could be potentially substituted and rather be used in a polishing treatment unit. Based on these findings, the most promising mixture was the 50% wood ash type DAS (WA50-DAS).     

鄂尔多斯盆地渭北地区上三叠统延长组长7油层组碳酸盐结核中自生碳酸盐矿物的特征

早期形成的碳酸盐结核在埋藏期间会经历多种碳酸盐矿物相沉淀的复杂胶结作用,岩石学研究是探究结核成因的关键。通过野外剖面观察、岩石学观察和阴极发光技术,分析了鄂尔多斯盆地渭北地区上三叠统延长组长7油层组泥页岩中各种形状的方解石和白云石结核中自生碳酸盐矿物的特征。这些结核为成岩早期的产物,构成结核的自生碳酸盐矿物特征显著:(1)球粒方解石结核中,方解石呈纤维状或刃片状,球粒间充填晶粒方解石或因压实呈贴面结合,纤维状方解石发桔红色和暗红色2种光,刃片状方解石发暗红色光;(2)粉晶方解石结核中,方解石呈他形粒状,含有机质包裹体或纤维状晶形残余,晶间含沥青和纤维状方解石残余,主要发暗红色光;(3)白云石结核有泥晶和粉晶2种晶体类型,粉晶白云石结核含较多泥质,泥质条带或有机质条带处常见纤柱状白云石;(4)沿裂缝充填的方解石和白云石常呈纤维状或纤柱状结构,发暗红色光或不发光。研究区长7油层组碳酸盐结核中的方解石和白云石具有不同的成因类型和复杂的胶结作用:球粒方解石和泥晶白云石代表了结核开始形成时的胶结作用,可以准确地反映结核的成因;粉晶方解石、粉晶白云石反映了交代成因;裂缝中纤维状、纤柱状方解石和白云石集合体则为结核经历了较强压实作用之后充填裂缝而成。     

Organic petrology, mineralogy and depositional environment of the Kipra lignite seam, Maritza-West basin, Bulgaria

The aim of the present study is to provide additional information about the properties and depositional environment of the Kipra lignite seam, which was deposited during the regressive stage of development of the Maritza-West basin. Petrographical and mineralogical data, along with ash yields and sulphur contents of 24 samples from a seam profile, have been used to study the vertical variation of the depositional settings during peat accumulation and subsequent coalification.The Kipra lignite is characterized by high ash yields and sulphur contents. It formed in a rheotrophic, low-lying mire with alkaline pH value. Vegetation with low preservation potential dominated within the palaeomire. During peat formation, frequent changes of the water level controlled the depositional environment. During the deposition of units 1 and 2, high water energy caused the transportation of high amounts of inorganic material into the mire, resulting in the formation of weakly gelified mineral-rich lignite. The organic matter from units 3 and 4 is characterized by enhanced gelification, which probably reflects the decreasing energy of the system. Good positive correlation between sulphur contents and the GI values was established in units 4, indicating that the gelification of the tissues was probably mainly controlled by the bacterial activity. In contrast, the gelification of the samples from unit 3 of the Kipra seam was probably governed by the redox conditions. The organic matter deposited under relatively wet conditions, in which the thermal and oxidative destruction of the tissues, was limited.A variety of major, minor and accessory minerals are present in Maritza-West lignite. The mineral composition is dominated mainly by pyrite, gypsum and calcite, and to a lesser extent limonite, quartz, kaolinite, montmorillonite, illite, chlorite and plagioclase. Jarosite, hematite, halloysite, mica, K-feldspar, aragonite, siderite, and dolomite were also determined in very low concentrations. These minerals formed syngenetically and epigenetically. The syngenetic stage is characterized mainly by the formation of pyrite, carbonates, silicates and sulphates, whereas the Fe-oxyhydroxides, partially the carbonates and almost all silicates are of detrital origin. During the epigenetic stage, carbonates, sulphates, clay minerals, pyrite, and Fe-oxyhydroxides were formed. Alteration products like gypsum, jarosite, limonite, chlorite, kaolinite, illite, mica, and calcite were generated due to the transformation of detrital and authigenic minerals.     

Origin and diagenetic evolution of Ca–Mg–Fe carbonates in some coalfields of Japan

Carbonate concretions, lenses and bands in the Pleistocene, Palaeogene and Upper Triassic coalfields of Japan consist of various carbonate minerals with varied chemical compositions. Authigenic carbonates in freshwater sediments are siderite > calcite > ankerite > dolomite >> ferroan magnesite; in brackish water to marine sediments in the coal measures, calcite > dolomite > ankerite > siderite >> ferroan magnesite; and in the overlying marine deposits, calcite > dolomite >> siderite. Most carbonates were formed progressively during burial within a range of depths between the sediment-water interface and approximately 3 km. The mineral species and the chemical composition of the carbonates are controlled primarily by the initial sedimentary facies of the host sediments and secondarily by the diagenetic evolution of pore water during burial. Based on the regular sequence and burial depth of precipitation of authigenic carbonates in a specific sedimentary facies, three diagenetic stages of carbonates are proposed. Carbonates formed during Stage I (< 500 m) strongly reflect the initial sedimentary facies, e.g. low Ca-Mg siderite in freshwater sediments which are initially rich in iron derived from lateritic soil on the nearby landmass, and Mg calcite and dolomite in brackish-marine sediments whose pore waters abound in Ca²⁺ and Mg²⁺ originating in seawater and calcareous shells. Carbonates formed during Stage II (500–2000 m) include high Ca-Mg siderite, ankerite, Fe dolomite and Fe–Mg calcite in freshwater sediments. The assemblage of Stage II carbonates in brackish-marine sediments in the coal measures is similar to that in freshwater sediments. This suggests similar diagenetic environments owing to an effective migration and mixing of pore water due to the compaction of host sediments. Carbonates formed during Stage III (> 2000 m) are Fe calcite and extremely high Ca-Mg siderite; the latter is exclusively in marine mudstones. The supply of Ca is partly from the alteration of silicates in the sediments at elevated burial temperatures. After uplift, calcite with low Mg content precipitates from percolating groundwater and fills extensional cracks.     

Use of fracture filling mineral assemblages for characterizing water-rock interactions during exhumation of an accretionary complex: An example from the Shimanto Belt,southern Kyushu Japan

Various fracture filling minerals and secondary minerals in fracture walls were formed by fluid-rock interaction during the exhumation of the Palaeogene Shimanto Belt of Kyushu, Japan, which is located in an accretionary complex. Each mineral formed under favourable geological conditions and can be used to estimate the conditions of accretion and formation of the related rock sequences. Petrographic observations, mineralogical and geochemical analyses were made on fracture filling minerals and secondary minerals from boreholes of ca. 140 m depth, drilled in the Shimanto Belt. Results reveal that the secondary minerals were formed in three major stages distinguished by the sequential textural relationships of the minerals and the interpreted environment of mineral formation. Filling mineral assemblages show that the studied rock formation has been subducted to a depth of several km and the temperature reached was ca. 200–300 °C. After the subduction, the rock formation was uplifted and surface acidic water penetrated up to 80 m beneath the present ground surface. The acid water dissolved calcite fracture filling minerals to form the present groundwater flow-paths, which allowed recent wall rock alteration to occur. The results shown here imply that filling mineral assemblages can be an effective tool to evaluate the environmental changes during exhumation of an accretionary complex.     

Diagenetic mineral development within the Upper Jurassic Haynesville-Bossier Shale,USA

Despite recent advances, diagenetic processes in fine-grained sediments are still relatively poorly understood. Key questions still to be resolved include the types of diagenetic minerals present in mudstones and the extent of element mobility in these low permeability systems. This study utilizes data from the Haynesville-Bossier Shale, USA, to analyze lithologies, discriminate authigenic phases and identify mobile elements during diagenesis. It has implications for understanding how authigenic minerals develop and the sources of those authigenic minerals in fine-grained sediments. On the basis of grain-size and mineralogy five lithologies are designated: (i) silica-rich argillaceous mudstones; (ii) argillaceous siliceous mudstones; (iii) mixed siliceous mudstones; (iv) mixed mudstones; and (v) authigenically-dominated mudstones. The diagenetic development of the Haynesville-Bossier Shale can be divided into early and late diagenesis. Ferroan and non-ferroan dolomite, framboidal pyrite and bioclast pore-filling kaolinite and calcite grain replacements and cements all formed during early diagenesis. Late diagenetic mineral phases include illite formed by the illitization of smectite, replacive and displacive chlorite, calcite-replacive albite, quartz-replacive calcite and replacive and/or displacive quartz. The presence of extensive late diagenetic mineral precipitates indicates that there was a degree of element mobility on at least the local scale. Aluminium present in albite is most likely to have resulted from the illitization of smectite. Quartz overgrowths probably resulted from illitization and the pressure dissolution at quartz silt grain boundaries. Externally, hydrothermal fluids resulting from regional-scale igneous activity appear to have played a role in the formation of chlorite and possibly albite. The work indicates that extensive mineral development and element mobility occurred during late diagenesis.     

酒西盆地碎屑岩胶结物的形成问题

酒西盆地下白垩统陆相碎屑岩胶结物的形成关系到油气储集的重要问题,富铁的洪积扇沉积体系和非富铁的河流一湖泊沉积体系形成两种不同的胶结物组合类型,平面上可分为三带胶结物:混合胶结带、铁镁胶结带和浓聚成岩带。盆地边缘带是以铁、泥、钙为主的混合胶结物,中间为以碳酸铁镁矿物的白云石、铁白云石为主的胶结物,盆中带形成胶结物的浓聚成岩层,事实证明过渡的铁镁胶结带是最富于聚集油气的地带。本文还在纵向上探讨了泥质粘土矿物和碳酸盐胶结物的成岩变化。     

X射线粉晶衍射仪在山东蒙阴金伯利岩蚀变矿物鉴定中的应用

山东蒙阴金伯利岩组成矿物以蚀变矿物为主,X射线粉晶衍射仪鉴定结果显示无矿金伯利岩矿物组分为方解石、白云石、石英、钙锆钛矿,标志性矿物为白云石和钙锆钛矿;贫矿金伯利岩矿物组分为蛇纹石、方解石、钙铝榴石、磁铁矿和金云母,标志性矿物为钙铝榴石;富矿金伯利岩矿物组分为蛇纹石、方解石、绿泥石、磷灰石、磁铁矿和金云母,标志性矿物为绿泥石和磷灰石。采用X射线粉晶衍射仪鉴定金伯利岩蚀变矿物组合,寻找蚀变矿物组分变化与金伯利岩含矿性的关系,利用标志性的蚀变矿物判断金伯利岩无矿、贫矿还是富矿,是非常有意义的。     

River water quality in weathered limestone: A case study in upper Mahanadi basin, India

Stromatolitic limestone and calcareous shale belonging to Chattisgarh Supergroup of Proterozoic age dominate the upper part of the Mahanadi river basin. X-ray diffractogram (XRD) of limestone rocks show presence of a significant amount of calcite, dolomite and ankerite. Shales of various colours contain calcite and dolomite. It is observed that congruent dissolution of carbonate minerals in the Charmuria pure limestone has given rise to a typical karst topography. On the other hand, limestones are also seen to support red and black soil profiles. This indicates that the limestone bedrock undergoes a parallel incongruent weathering, which leaves a residue of decomposed rock. The XRD analyses reveal that the limestone soils thus formed contain an assemblage of quartz, clays and Fe-oxides. It is likely that the silicate component trapped during deposition of the stromatolitic limestone weathers incongruently resulting in diverse soil profiles. Carbonate and silicate mineral weathering schemes have been worked out to explain the soil formation, fixation of Al in clay minerals, and Fe in goethite. The water quality parameters such as Ca, Mg and HCO₃ in the river water suggest under saturation with respect to calcite and dolomite. The mineral stability diagrams indicate that kaolinite and Ca-smectite are stable in the river water environment, hence they occur in suspended sediments and soils. The dominant influence of carbonate weathering on the water quality is observed even in the downstream part of the river outside the limestone terrain.     

Effect of mechanical treatment on the mineralogical constituents of Abu-Tartour phosphate ore,Egypt

This study deals with the effect of mechanical treatment, using vibrating mill, on the mineralogy and structure of apatite and associated gangue minerals (dolomite, calcite, quartz, pyrite and gypsum) in Abu-Tartour phosphate ore, Egypt. The evolution of mineralogy, crystallinity and deformation mechanism were evaluated with different techniques (XRD, DTA, TGA and FT-IR). Data obtained using these techniques give a good picture about the mechanochemical behavior of the different components in the ore. X-ray diffraction (XRD) indicated that the mineralogy has been changed quantitatively at short time grinding (30 min). After 45 min of grinding, the sample contained mainly carbonate apatite, quartz and pyrite. On the other hand, dolomite mineral disappeared, while calcite was partially transformed into aragonite. This transformation increased with increasing grinding time. Both Fourier Transform Infrared (FT-IR) and differential thermal analysis (DTA) analyses revealed that remarkable changes in the structural groups have occurred after 45 min of grinding. After 75 min of grinding, the carbonate in the apatite mineral partially decomposed and tricalcium phosphate formed instead. The formation of that simple form (tricalcium phosphate) may be another reason, besides surface area, for increasing the reactivity of phosphate ore by grinding. Scanning electron micrographs (SEM) revealed some idea about the grinding mechanisms of Abu-Tartour phosphate using vibrating mill. They indicate that the different minerals are ground differently. The apatite minerals are ground mostly by abrasion mechanism, while the carbonate minerals are ground mostly by compression. Also, these minerals are ground with different rates, where dolomite is ground faster than calcite, which are referred to the crystal lattice.     

韶关市大气降尘矿物成分和形貌特征研究

利用X射线衍射（XRD）仪、扫描电镜X射线能谱（SEM/EDX）仪研究大气降尘矿物成分和颗粒物形貌特征。结果表明，韶关市大气降尘主要矿物成分为伊利石、斜长石、绿泥石、石英、方解石、白云石和无定型非晶质物等，大气颗粒物形貌可分为4种类型：粒状、片状单矿物，链状集合体，圆球状飘珠和不规则粒状集合体。伊利石、绿泥石来源于地面扬尘，方解石、白云石来源于建筑扬尘，无定型非晶质物来源于工业烟尘。粒状、片状单矿物是地面扬尘的标志，链状集合体和圆球形飘珠是工业烟尘的标志，不规则粒状集合体是建筑扬尘的标志。大气降尘矿物成分和形貌特征是判别污染物来源的重要标志。     

白云鄂博碳酸岩脉的显微共聚焦激光拉曼光谱分析

白云鄂博矿区发育的脉状稀土碳酸岩，由于其结晶迅速，矿物颗粒细微，其中的微小矿物的鉴定一直是一个难题。应用显微共聚焦激光拉曼光谱仪则能较好地解决这一问题。研究表明，白云鄂博地区存在富稀土白云质岩浆碳酸岩脉，早期阶段形成碱性长石和铁白云石，无稀土矿化；铁白云石常常出溶铁质而自身则形成方解石。霓石和方解石形成略晚，常常与氟碳铈矿等稀土矿物共生，出现强烈的稀土矿化；而无解理的方解石则形成于更晚的岩浆期后热液阶段，发育大量的流体包裹体，并出现强烈的铌、稀土矿化。铌铁矿分布在氟碳铈矿中和赤铁矿边缘，为热液交代作用的产物。早期结晶的矿物如碱性长石、铁白云石稀土矿化弱，岩浆晚期分异出大量的流体相，稀土元素和Sr等进入岩浆热液中，并在热液结晶矿物中富集，甚至在非平衡结晶的石英中产生强烈的稀土矿化。结合岩相学显微观察，显微拉曼探针很好的揭示了这一地质过程。同时为白云鄂博矿床铌、稀土矿化的热液交代成因提供了依据。     

河北小寺沟蛇纹石玉的矿物成分和化学成分研究

在野外地质调查的基础上,通过显微薄片观察、电子探针分析、X射线衍射分析、红外光谱分析、X射线荧光光谱分析、微量元素分析、稀土元素分析等现代测试方法对河北小寺沟蛇纹石玉的矿物成分、化学成分进行了研究。结果表明,小寺沟蛇纹石玉为富镁碳酸盐岩蚀变形成的蛇纹岩,其主要矿物成分为利蛇纹石,次要矿物成分有方解石、白云石、透辉石、金云母、磁铁矿、黄铁矿等。蛇纹石玉的稀土元素来源于围岩大理岩,其稀土元素球粒陨石标准化配分图与其围岩大理岩的稀土配分图非常相似,为陡右倾型,具有稀土元素总量较低、富集轻稀土、具δEu负异常的特点。     

History of the extraglacial zone of the West Siberian Lowland in the Late Cenozoic

A distinction must be drawn between "molar" and "total" basicities of minerals and their components. The "molar" basicity is defined as the degree of ionization of the components. As the acidity of solutions attacking rocks increases, we observe a series of metasomatic reactions with replacement of the components in order of decreasing molar basicity, the reverse picture being observed as the basicity of the solutions increases. The "total basicity" of a mineral is its molar basicity multiplied by its solubility. The molar and total basicities of minerals usually agree. However, as shown by Marakushev (1973), sodium feldspar (albite) has a higher basicity than potassium feldspar, and dolomite has a higher basicity than calcite, although potassium is more electro-positive than sodium, and calcium is more electropositive than magnesium. Calculations reveal that this special case is due to the higher solubility of albite and dolomite, although the molar basicity of potassium feldspar is higher than that of albite, and the molar basicity of calcite is higher than that of dolomite. Correspondingly, an increase in the acidity of the solutions leads to replacement of potassium feldspar by albite, and of calcite by dolomite. Complications are also induced by the markedly different mobilities of the components during mineral formation. Thus owing to the leveling of the CO₂ concentrations in the pore solutions of the rocks during their metamorphism, the presence or absence of CO₂ in the minerals of the rocks has no effect on their relative basicity. —Author.     

植被覆盖区高光谱蚀变矿物信息提取

在植被覆盖严重地区,基于综合光谱信息模型,开展了高光谱遥感典型蚀变矿物信息提取研究.以河北省承德市大营子地区为例,利用Hyperion数据,在植被覆盖度大于70%的地区,根据蚀变矿物与背景地物波谱特征的差异,提取了该区绿泥石、斜绿泥石、方解石和白云石蚀变矿物分布信息,与已知地质矿产资料及野外检查结果一致.最后依据蚀变矿...     

Chemical composition and leaching characteristics of granules made of wood ash and dolomite

 In 1995, the central heating plant Draken in Kalmar, Sweden, started manufacturing a granular ash product for nutrient recycling to forest soil, instead of dumping the ash in landfills. Chemical composition, leaching and dissolution characteristics were determined for the Draken wood ash, the dolomite used in granule manufacturing and the final granule product. The heavy metal concentrations in fly ash were within the limit values recommended by the Swedish National Board of Forestry for ash recycling, except for Cd and As levels which occasionally exceeded the limit values. The Ca, Mn and P levels were too low for nutrient recycling at the time. Adding dolomite insures that the levels of the important nutrients Ca and Mg are sufficient in the granules. After 7 months in the field, about 60 % of Na and K was leached out from granules. Between 20 and 60% of trace elements Mo, Sc, V, Y and Zr were leached out after 7 months. The release of Ca and Mg was low, 1–5% during 7 months. Received: 12 July 1999 · Accepted: 31 August 1999