Co-metabolic decolorization of a textile reactive dye by <Emphasis Type="Italic">Aspergillus fumigatus</Emphasis>

In the present study, a widely used reactive dye, Color Index (C.I.) Reactive Blue 268 was utilized for mycoremediation by Aspergillus fumigatus isolated from textile effluent. Complete decolorization of the test dye (0.1 g L^?1) was recorded within 6 days of static incubation at 27 °C in Czapek Dox broth (CDB). However, the isolate was unable to utilize the dye as a sole source of energy in Czapek Dox agar and CDB in absence of sucrose and obligate requirement of a labile carbon source, i.e., sucrose needed for induction of decolorization. Biosorption seems to play the pivotal role in decolorization as evident by coloring of the fungal biomass as that of dye color. The optimal conditions for the highest decolorization were found at 30 °C and pH 6.0 with 6-day-old inoculums supplemented with sucrose (10 g L^?1) and ammonium chloride (2 g L^?1) as a carbon and nitrogen source, respectively. The response of the isolate to increasing dye concentrations was found to be growth inhibitory. Surprisingly, about 65 % of dye decolorization was recorded with heat-inactivated biomass powder within 6 days of static incubation supporting the fact of fungal biosorption. Results of this study have established the candidature of the isolate for biotechnological removal of dyes from disreputable dying effluents.     

Investigating the removal of ethylbenzene from aqueous solutions using modified graphene oxide: application of response surface methodology

This research focused on the application of response surface methodology (RSM) for the removal of ethylbenzene by the graphene oxide grafted with polymethyl vinyl ketone and aniline (GO-MVK-ANI) from wastewater. The adsorbent was prepared through polymerization of graphene oxide with methyl vinyl ketone using ammonium persulfate initiator and further modification by aniline. The synthesized material was characterized via Fourier transform infrared resonance spectroscopy, scanning electron microscopy, energy-dispersive X-ray spectroscopy and Brunauer–Emmett–Teller analysis. RSM was used to minimize the number of experiments and investigate the effect of three selected parameters (contact time, initial pH and adsorbent dose) on the removal efficiency of ethylbenzene. Additionally, the affecting parameters were optimized based on the selected target (ethylbenzene removal efficiency). The results show that 73% ethylbenzene could be adsorbed with initial ethylbenzene concentration of 20 mg/l under the optimum conditions (the contact time of 11 min, pH of 5.64 and adsorbent dose of 3.75 g/l). In this paper, high R ²-value (97.18%) for ethylbenzene removal and a good agreement with adjusted R ²-value (94.65%) indicated that the model was successful and the results demonstrated a reasonable proportion of the experimental and the predicted results.     

Optimization of ammonia removal by ion-exchange resin using response surface methodology

The ability of ion-exchange resin for ammonia removal from aqueous solution was studied. The results showed that Amberlite ion-exchange resin was effective in removing ammonia from aqueous solution. Factorial design and response surface methodology were applied to evaluate and optimize the effects of pH, resin dose, contact time, temperature and initial ammonia concentration. Low pH condition was preferred with the optimum pH found to be 6. High resin dose generated high removal rate and low exchange capacity. Results of factorial design and response surface methodology showed that temperature was not a significant parameter. The model prediction was in good agreement with observed data (R ² = 0.957). The optimum Q _e was 28.78 mg/g achieved at pH = 6 and initial TAN concentration of 3000 mg/L. The kinetics followed the pseudo-second-order kinetic model (R ² = 0.999). Equilibrium data were fitted to Langmuir and Freundlich isotherm models with Langmuir model providing a slightly better predication (R ² = 0.996). The resin was completely regenerated by 2 N H₂SO₄.     

Comparative study of the absorptive potential of raw and activated carbon <Emphasis Type="Italic">Acacia nilotica</Emphasis> for Reactive Black 5 dye

Acacia nilotica was used for the adsorption of Reactive Black 5 (RB5) dye from an aqueous solution. Both the raw and activated (with H₃PO₄) carbon forms of Acacia nilotica (RAN and ANAC, respectively) were used for comparison. Various parameters (including dye concentration, contact time, temperature, and pH) were optimized to obtain the maximum adsorption capacity. RAN and ANAC were characterized using Fourier transform infrared spectroscopy, scanning electron microscopy, and energy-dispersive X-ray spectroscopy. The maximum experimental adsorption capacities for RAN and ANAC were 34.79 and 41.01 mg g^?1, respectively, which agreed with the maximum adsorption capacities predicted by the Langmuir, Freundlich, and Dubinin–Radushkevich equilibrium isotherm models. The adsorption data of ANAC showed a good fit to the isotherm models based on the coefficient of determination (R ²): Langmuir type II (R ² = 0.99) > Freundlich (R ² = 0.9853) > Dubinin–Radushkevich (R ² = 0.9659). This result suggested monolayer adsorption of RB5 dye. The adsorption of RB5 dye followed pseudo-second-order kinetics. The RAN adsorbent reflected an exothermic reaction (enthalpy change, ΔH = ?0.006 kJ mol^?1) and increased randomness (standard entropy change, ΔS = 0.038 kJ mol^?1) at the solid–solution interface. In contrast, ANAC reflected both exothermic [?0.011 kJ mol^?1 (303–313 K)] and endothermic [0.003 kJ mol^?1 (313–323 K)] reactions. However, the ΔS value of ANAC was lower when the RB5 adsorption increased from 313 to 323 K. The negative values for the Gibbs free energy change at all temperatures indicated that the adsorption of RB5 dye onto RAN and ANAC was spontaneous in the forward direction.     

Adsorption of methylene blue and crystal violet on low-cost adsorbent: waste fruits of <Emphasis Type="Italic">Rapanea ferruginea</Emphasis> (ethanol-treated and H<Subscript>2</Subscript>SO<Subscript>4</Subscript>-treated)

This study assesses the ability of two low-cost adsorbents made from waste of Rapanea ferruginea treated with ethanol (WRf) and its H₂SO₄-treated analog (WRf/H₂SO₄) for the removal of two cationic dyes methylene blue (MB) and crystal violet (CV) from aqueous solutions. The adsorbent was characterized by scanning electron microscopy, Fourier transform infrared spectrometry, thermogravimetric analysis, point of zero charge (pH_pzc), specific surface, and functional groups. The adsorption of dye onto the adsorbents was studied as a function of pH solution (2–12), contact time (up to 120 min) and initial concentration (20–120 mg/L), and temperature (25, 35, and 55 °C). The influence of these parameters on adsorption capacity was studied using the batch process. The response surface methodology (RSM) was used in the experimental design, modeling of the process, and optimizing of the variables and was optimized by the response involving Box–Behnken factorial design (15 runs). The results show that the data correlated well with the Sips isotherm. The maximum adsorption capacities of MB and CV onto WRf were found to be 69 and 106 mg/g, and onto WRf/H₂SO₄, the adsorption capacities were 33 and 125 mg/g, respectively. The kinetic data revealed that adsorption of cationic dyes onto the adsorbents closely follows the pseudo-second-order kinetic model. Regression analysis showed good fit of the experimental data to the second-order polynomial model, with coefficient of determination (R²) values for MB (R²?=?0.9685) and MB (R²?=?0.9832) for WRf and CV (R²?=?0.9685) and CV (R²?=?0.9832) for WRf/H₂SO₄ indicated that regression analysis is able to give a good prediction of response for the adsorption process in the range studied. The results revealed that waste from R. ferruginea is potentially an efficient and low-cost adsorbent for adsorption of MB and CV.     

Microbiological degradation of phenol using two co-aggregating bacterial strains

Phenol biodegradation in an aerobic batch reactor was investigated using mixed two co-aggregating strains (Flavobacterium sp. and Acetobacter sp.). Response surface methodology by the Box–Behnken model was used to evaluate the optimal cell growth and phenol degradation conditions. The optimum temperature, pH value and inoculum size were found to be 33 °C, 6.06 and 13 %, respectively. In the conditions, phenol degradation rate and biomass were predicted to be 96.97 % and 410.78 mg/L within the range examined, respectively. Less toxic acetaldehyde, ethanol and acetic ether were identified as main intermediate products from the degraded samples using GC–MS. Substrate inhibition was calculated from experimental biomass growth and phenol degradation parameters using the Haldane equation. Kinetic parameters derived from nonlinear regression with correlation factors (R ²) were 0.9682 for phenol degradation and 0.9594 for biomass growth, respectively. The phenol concentration to avoid substrate inhibition was 278.17 mg/L.     

Geochemical evaluation and environmental application of Yemeni natural zeolite as sorbent for Cd<Superscript>2+</Superscript> from solution: kinetic modeling,equilibrium studies,and statistical optimization

Yemeni natural zeolite was characterized by XRD, SEM, FTIR and XRF as well as its applicability as a sorbent material for Cd²⁺ ions in aqueous solutions. The zeolitic sample is clinoptilolite-K of heulandite group with intermediate Si/Al ratio. The removal% of Cd²⁺ by natural clinoptilolite was investigated as a function of contact time, zeolite dose, pH and initial concentration of Cd²⁺ ions. Kinetic experiments indicated that sorption of Cd²⁺ follows two steps: rapid ion exchange process on the outer surface is followed by slow adsorption process on the inner surface of clinoptilolite. The equilibrium was attained after 120 min, and the results were fitted well with pseudo-second order and Elovich kinetic models. The Cd²⁺ removal% is strongly dependent on pH value and increases with the increasing pH value. Equilibrium sorption isotherm of Cd²⁺ by clinoptilolite was described well using the Langmuir, Freundlich, and Temkin isotherms models. However, the data relatively well fitted with Freundlich model (R ² = 0.97) rather than by the other models. Response surface methodology in conjunction with central composite rotatable statistical design was used to optimize the sorption process. The model F-value indicated the high significance of second-order polynomial model to represent the interaction between the operating parameters. From the Design Expert’s optimization function, the predicted optimum conditions for maximum removal% of Cd²⁺ (80.77%) are 116 min contact time, 0.27 gm dose, and pH 7 at an initial Cd²⁺ concentration of 25 mg/L.     

Microbial decolorization and degradation of crystal violet dye by <Emphasis Type="Italic">Aspergillus niger</Emphasis>

Two fungi were isolated and examined to decolorize crystal violet dye, frequently used as textile dye and in microorganism staining, using basal salt medium under static condition at 30 °C. The more effective fungus gave less dry weight and lower pH indicating that the process was directed toward the decolorization process giving acidic products rather than microbial growth. The effective fungus was identified as Aspergillus niger and was used in the rest of experiments. Increasing the incubation period more than 10 days did not improve the decolorization process, while the best pH was 5.5. The decolorization process was effective (up to 84.6 %) with the examined range of dye concentrations (10–40 ppm). Sucrose content, as a carbon source, more than 1 % did not improve the decolorization process (80.9 %). Using ammonium sulfate as a nitrogen source, instead of sodium nitrate in the original basal medium, lowered the decolorization process, while using corn steep liquor enhanced the biodegradation up to 96.1 %. Although the dye violet color vanishes in acid medium because of decreasing the possibility of extending the benzene chromophore as a result of binding the nitrogen lone pair in the ammonium ion, the UV–Vis spectra and LC–MS–ESI analysis of the bioassay products proved that the decolorization is due to the biodegradation of the dye rather than the resonance factor in acidic medium or biosorption by fungus mycelia.     

Optimization of parameters using response surface methodology and genetic algorithm for biological denitrification of wastewater

In the present study the removal of nitrates from wastewater using Pseudomonas stutzeri microorganism in a Gas–Liquid–Solid bioreactor at the concentration of 200 ppm was studied for a period of 12 h. The response surface methodology with the help of central composite design and genetic algorithm were employed to optimize the process parameters such as airflow rate, biofilm carrier, carbon source, temperature and pH which are responsible for the removal of nitrates. The optimized values of parameters found from RSM are airflow rate 2.41 lpm, biofilm carrier 15.15 g/L, carbon source 85.0 mg/L, temperature 29.74 °C, pH 7.47 and nitrate removal 193.16. The optimized parameters obtained from genetic algorithm are airflow rate 2.42 lpm, biofilm carrier 15.25 g/L, carbon source 84.98 mg/L, temperature 29.61 °C, pH 7.51 and nitrate removal is 194.14. The value of R² > 0.9831 obtained for the present mathematical model indicates the high correlation between observed and predicted values. The optimal values for nitrate removal at 200 ppm are suggested according to genetic algorithm and at these optimized parameters more than 96 % of nitrate removal was estimated, which meets the standards for drinking water.     

Response surface methodology (RSM) optimization approach for degradation of Direct Blue 71 dye using CuO–ZnO nanocomposite

The present study highlights the synthesis of CuO–ZnO nanocomposite via facile hydrothermal method at 150 °C and autogenous pressure. The structural and textural features of prepared composite material was characterized by several characterization techniques such as X-ray powder diffraction, Fourier transform infrared spectroscopy, Scanning electron microscopy, and energy-dispersive X-ray spectroscopy. The optimized prepared nanocomposite was utilized for photocatalytic degradation of aromatic Direct Blue 71 dye (DB71) under natural sunlight conditions. The catalytic activity results by CuO–ZnO nanocomposite were observed to be higher than the reagent-grade zinc oxide under visible light conditions. The response surface methodology protocol (RSM) with central composite design was optimized by different photodegradation operational parameters such as pH, dye concentration, catalyst amount, and reaction time. The optimized RSM results demonstrated that a quadratic polynomial model was found suitable to define the relation between the photocatalytic activity and operational parameters. Moreover, the observed high R ² value (0.9786) confirms a strong evaluation of experimental data. To achieve maximum DB71 degradation, optimized condition was found at 177.13 min of contact time, 3.93 solution pH, and 24.34 mg/L of dye concentration with 1.85 g/L of catalyst dose The identical optimum conditions resulted maximum 89.58% DB71 degradation.     

Effect of Fenton process on treatment of simulated textile wastewater: optimization using response surface methodology

A large portion of water is consumed during various textile operations thereby discharging wastewaters with pollutants of huge environmental concern. The treatment of such wastewaters has promising impact in the field of environmental engineering. In this work, Fenton oxidation treatment was engaged to treat simulated textile wastewater. Box–Behnken design and response surface methodology were employed to optimize the efficiency of Fenton process. Iron dose, peroxide dose and pH were considered as input variables while the responses were taken as chemical oxygen demand and color removal. A total of 17 experiments were conducted and analyzed using second-order quadratic model. The quadratic models generated for chemical oxygen demand and color removal efficiencies were validated using analysis of variances, and it was found that the experimental data fitted the second-order model quite effectively. Analysis of variances demonstrated high values of coefficient of determination (R ²) for chemical oxygen demand and color removal efficiencies with values of 0.9904 and 0.9963 showing high conformation of predicted values to the experimental ones. Perturbation plots suggested that the iron dosage produced the maximum effect on both chemical oxygen demand and color removal efficiencies. The optimum parameters were determined as Fe²⁺ dose—550 mg/L, H₂O₂ dose—5538 mg/L, pH—3.3 with corresponding chemical oxygen demand and color removal efficiencies of 73.86 and 81.35%. Fenton process was found efficient in treatment of simulated textile wastewater, and optimization using response surface methodology was found satisfactory as well as relevant. From the present study, it can also be concluded that if this method is used as pretreatment integrated with biological treatment, it can lead to eco-friendly solution for treatment of textile wastewaters.     

Decolorization of Congo red mediated by marine <Emphasis Type="Italic">Alcaligenes</Emphasis> species isolated from Indian West coast sediments

Alcaligenes species capable of degrading highly recalcitrant, carcinogenic, water-soluble dye—Congo red—were isolated from Indian West coastal sediments. Individual strains showed decolorization rates ranging from 76.49 to 98.76% within 24–48 h. Decolorization was most efficient at anoxic conditions catalyzed by intracellular azoreductase enzyme with an activity of 0.032 µmol min^?1 mg^?1 of protein. Degradation was confirmed by HPLC and FTIR analysis. LC/MS analysis of degraded metabolites established the cleavage of the azo bond-producing biphenyl diamine and 1,2′-diaminonapthalene-4-sulfonic acid. These results signify the effectiveness and ease to engineer processes such as feed batch/immobilized cell systems using these strains as biocatalysts to address the problem of global coastal water pollution caused by increased disposal of azo dye-containing industrial effluents.     

Up-scaling application of microbial carbonate precipitation: optimization of urease production using response surface methodology and injection modification

In order to reduce the cost of the microbial-induced carbonate precipitation, mixotrophic growth of Sporosarcina pasteurii was carried out at different yeast extract/sodium acetate concentrations and constant chemical oxygen demand for optimal production of urease enzyme. Optimization of cultivation conditions was also investigated using a 3-level central composite design approach based on the response surface methodology. A good agreement between predicted values of enzyme activity and experimental results was observed (R ² value of 0.973). All three chosen independent variables had statistically great effects on the efficiency of urease activity. The maximum activity of 2.98 mM urea min^?1 was achieved at yeast extract concentration of 5 g L^?1, NH₄ concentration of 9.69 g L^?1, and incubation time of 60 h as the optimal conditions. Thereafter, a novel injection procedure as sequencing batch mode injection has been proposed for bacteria and cementation fluid injection at obtained optimal urease activity. After fourth injection of bacteria and cementation fluid, uniform CaCO₃ distribution with unconfined compression strength of 795 kPa was obtained even for poorly graded sand. The presented experimental approach for optimizing urease activity and strength production in porous media can be used to design the treatment protocol for practical engineering applications.     

Removal of phosphates from aqueous solution by sepiolite-nano zero valent iron composite optimization with response surface methodology

In this study, sepiolite-nano zero valent iron composite was synthesized and applied for its potential adsorption to remove phosphates from aqueous solution. This composite was characterized by different techniques. For optimization of independent parameters (pH = 3–9; initial phosphate concentration = 5–100 mg/L; adsorbent dosage = 0.2–1 g/L; and contact time = 5–100 min), response surface methodology based on central composite design was used. Adsorption isotherms and kinetic models were done under optimum conditions. The results indicated that maximum adsorption efficiency of 99.43 and 92% for synthetic solution and real surface water sample, respectively, were achieved at optimum conditions of pH 4.5, initial phosphate concentration of 25 mg/L, adsorbent dosage of 0.8 g/L, and 46.26 min contact time. The interaction between adsorbent and adsorbate is better described with the Freundlich isotherm (R ² = 0.9537), and the kinetic of adsorption process followed pseudo-second-order model. Electrostatic interaction was the major mechanisms of the removal of phosphates from aqueous solution. The findings of this study showed that there is an effective adsorbent for removal of phosphates from aqueous solutions.     

Synergistic degradation of diazo dye Direct Red 5B by Portulaca grandiflora and Pseudomonas putida

Plants and bacterial consortium of Portulaca grandiflora and Pseudomonas putida showed complete decolorization of a sulfonated diazo dye Direct Red 5B within 72 h, while in vitro cultures of P. grandiflora and P. putida independently showed 92 and 81 % decolorization within 96 h, respectively. A significant induction in the activities of lignin peroxidase, tyrosinase, 2,6-dichlorophenol indophenol reductase and riboflavin reductase was observed in the roots of P. grandiflora during dye decolorization; whereas, the activities of laccase, veratryl alcohol oxidase and 2,6-dichlorophenol indophenol reductase were induced in the cells of P. putida. Plant and bacterial enzymes in the consortium gave an enhanced decolorization of Direct Red 5B synergistically. The metabolites formed after dye degradation analyzed by UV–Vis spectroscopy, Fourier transformed infrared spectroscopy and high performance liquid chromatography confirmed the biotransformation of Direct Red 5B. Differential fate of metabolism of Direct Red 5B by P. grandiflora, P. putida and their consortium were proposed with the help of gas chromatography–mass spectroscopy analysis. P. grandiflora metabolized the dye to give 1-(4-diazenylphenyl)-2-phenyldiazene, 7-(benzylamino) naphthalene-2-sulfonic acid, 7-aminonaphthalene-2-sulfonic acid and methylbenzene. P. putida gave 4-hydroxybenzenesulfonic acid and 4-hydroxynaphthalene-2-sulfonic acid and benzamide. Consortium showed the formation of benzenesulfonic acid, 4-diazenylphenol, 6-aminonaphthalen-1-ol, methylbenzene and naphthalen-1-ol. Consortium achieved an enhanced and efficient degradation of Direct Red 5B. Phytotoxicity study revealed the nontoxic nature of metabolites formed after parent dye degradation. Use of such combinatorial systems of plant and bacteria could prove to be an effective and efficient strategy for the removal of textile dyes from soil and waterways.     

Application of a novel definitive screening design to decolorization of an azo dye on boron-doped diamond electrodes

The electrochemical decolorization of the Reactive Violet 5 azo dye on a boron-doped diamond anode was used as a model process to test a novel definitive screening design (DSD). This method allows a dramatic reduction in the number of experiments needed to investigate those systems characterized by a large number of variables. In this study, the effect of nine quantitative parameters was investigated: initial dye concentration (60–120 mg L^?1), current density (100–500 A m^?2), NaCl concentration (5–20 mM), Na₂SO₄ concentration (35–65 mM), pH (3–11), temperature (20–45 °C), inter-electrode distance (0.5–3.5 cm), stirring rate (250–750 rpm) and electrolysis time (2–8 min). Analysis of DSD data showed that four out of the nine factors (initial dye concentration, current density, pH and electrolysis time) were statistically significant. These factors were retained for process characterization using a subsequent central composite design. Overall, the number of experiments was reduced from over 500 to only 41, thus confirming the validity of the proposed approach as a time-saving and efficient method.     

Adsorption of hexavalent chromium onto activated carbon derived from <Emphasis Type="Italic">Leucaena leucocephala</Emphasis> waste sawdust: kinetics,equilibrium and thermodynamics

The adsorptive removal of Cr(VI) was studied using activated carbon derived from Leucaena leucocephala (ACLL). The physico-chemical properties of ACLL were determined using proximate analysis and N₂ BET surface area analysis. The N₂ BET surface area of ACLL was determined to be 1131 m² g^?1. The point of zero charge (pH_pzc) of 5.42 indicated that ACLL surface was positively charged for pH below the pH_PZC, attracting anions. The effect of experimental operating parameters such as time of contact, ACLL dose, pH, initial concentration and temperature was investigated. The optimum values of parameters such as concentration of 100 mg L^?1, 300 mg of ACLL dose, time of contact of 60 min, pH of 4 indicated the maximum Cr(VI) uptake of 13.85 mg g^?1. The pseudo-second-order kinetic model best fitted with the Cr(VI) adsorption data. Adsorptive removal of Cr(VI) onto ACLL satisfactorily fitted in the order of Redlich–Peterson > Freundlich > Langmuir > Temkin adsorption isotherm model. The thermodynamic parameters showed the adsorption of Cr(VI) onto ACLL was an endothermic and spontaneously occurred process.     

Optimization and design of a continuous biosorption process using brown algae and chitosan/PVA nano-fiber membrane for removal of nickel by a new biosorbent

In this study, nickel ions adsorption from zinc ingot factory wastewater by brown algae (Sargassum glaucescens) and chitosan/polyvinyl alcohol nano-fiber membrane at continuous system was studied. The continuous process included a biosorption reactor and fixed-bed reactor that were optimized by predicting two batch steps with response surface modeling, based on the Box–Behnken in the novel approach. Nano-biosorbent characterized by scanning electron microscopy, Brunauer–Emmett–Teller and Fourier transform infrared spectrometer analysis. Maximum biosorption in this continuous system was at pH 6, biosorbent doses 8 g L^?1 S. glaucescens and 0.48 g L^?1 nano-fiber. The study of the reaction rate showed kinetic data best fitted by pseudo-first-order model with R ² > 0.95 than pseudo-second-order and intraparticle diffusion models. Biosorption equilibrium data were performed using Langmuir isotherm and Freundlich isotherm, Langmuir isotherm fit better with equilibrium data.     

Biosorption of methylene blue from aqueous solutions by Typha angustata phytomass

The objective of this study was to investigate the biosorption of an azo dye (Methylene blue) by a wetland phytomass (Typha angustata) under post-phytoremediation scenario. Thus, the phytomass was used without any chemical modification. The batch adsorption experiments were conducted to evaluate the effects of contact time and temperatures (25–45 °C) on the adsorption of methylene blue (MB) from aqueous solution by cattail phytomass (CP). More than 80 % of MB dye was removed from the aqueous solution within first 10 min of the experiment. Langmuir isotherm was modeled to describe the monolayer adsorption of MB dye (R ² = 0.995) with the maximum adsorption capacity of 8.1 mg/g at 25 °C. Pseudo-second-order kinetic model adequately described the kinetics of absorption process (R ² = 0.999). The adsorption of MB on the cattail phytomass was a spontaneous and endothermic process that was governed by chemisorption. Hence, CP could be applied as a potential low cost biosorbent to treat dyeing wastewater.     

Biosorption optimization and equilibrium isotherm of industrial dye compounds in novel strains of microscopic fungi

The aim of this study was to evaluate the biosorption capacity of selected strains of microscopic fungi. We optimized the biosorption process and used the Freundlich isotherm for three strains: H. haematococca BwIII43, K37 and T. harzianum BsIII33 to describe the biosorption equilibrium of anthraquinone dye, Alizarin Blue Black B (ABBB) and alkali lignin (AL). In optimal conditions (1 g of mycelium biomass, pH = 7.0, 28 °C) for ABBB and AL sorption, the live biomass of H. haematococca BwIII43 was characterized by a higher sorption capacity, amounting to 247.47 and 161.00 mg g^?1, respectively. The highest sorption properties toward anthraquinone dye (K _F = 19.96 mg g^?1) were shown for the biomass of H. haematococca K37. In the presence of alkali lignin, the highest sorption capacity and bond strength exhibited the biomass of H. haematococca BwIII43 (K _F = 28.20 mg g^?1, n = 3.46). Effective decolorization of ABBB and AL by the selected strains of microscopic fungi indicated that the biosorption process additionally enhanced the removal of color compounds from the solution.