加权抛物Radon变换叠前地震数据重建

基于部分动校正（NMO）后反射同相轴在CMP道集上的抛物线走时近似,给出了加权抛物Radon变换叠前地震数据重建方法（WPRT）. WPRT通过在迭代过程中引入变化着的权系数,拓展和改进了传统抛物Radon变换方法,使其可同时完成不规则采样的规则化和空道及近偏移距道重建,且有更高的计算效率. 文中给出了应用WPRT进行近偏移距和中偏移距的空地震道重建及数据规则化的算法实现. 理论模型和实际地震资料的地震数据重建结果显示了本文算法的优点.     

3D高阶抛物Radon变换地震数据保幅重建

本文结合传统3D抛物Radon变换（PRT）和AVO数据正交多项式拟合,给出了3D高阶抛物Radon变换方法（HOPRT）.该变换增加了描述AVO数据变化的梯度信息和曲率信息,拓展了传统3D抛物Radon变换方法,使其在具有AVO特征的数据重建中具有更高的准确度,从而提高AVO分析的可靠性.文中给出了3D高阶抛物Radon变换进行地震数据保幅重建的流程.理论模型和实际地震资料的重建结果显示了本文方法的优点.     

抛物Radon变换法近偏移距波场外推

本文给出了抛物Radon变换的基本原理,以及部分动校正后的CMP道集抛物线近似有效性的证明,基于带限正反最小平方抛物Radon变换的Levinson递推算法,对缺失的近偏移距地震波场进行叠前重建和外推.给出了抛物Radon变换法地震道重建外推的基本原理和叠前地震数据规则化的处理流程,另外对于Radon域均匀采样的情形,本文给出了均匀层状介质和Marmousi模型的近偏移距外推结果,计算结果验证了算法的稳定性和适用性.     

快速3D抛物Radon变换地震数据保幅重建

为解决3D AVO地震数据快速保幅重建问题,在传统3D抛物Radon变换的基础上提出一种3D快速高阶抛物Radon变换方法.该方法将传统抛物Radon变换与正交多项式相结合,通过正交多项式系数描述地震数据AVO信息,确保重建后的地震数据具有良好保幅效果.同时,该方法引入新变量λ_x=q_xf和λ_y=q_yf,通过对q_xf和q_yf的整体采样,消除了3D高阶抛物Radon变换算子对频率的依赖,使变换算子的求逆过程仅需计算一次,大大节省计算时间.理论模型和实际地震资料的处理结果表明,该方法重建效率高,保幅效果良好.

     

带有多道相关的抛物线Radon变换法分离P-P、P-SV波

因为多波多分量地震勘探中P-P波和P-SV波通常混杂在一起,所以较好地分离P-P波和P-SV波能够提高数据处理和解释的质量.抛物线Radon变换法在分离P-P波和P-SV波时取得了一定效果,但是在离散叠加的计算过程中会带来假频,这些假频会干扰波场分离.本文针对这一问题,将多道相关算法引入抛物线Radon变换,发展了带有多道相关的抛物线Radon变换法.该方法利用叠加信号具有相似性的特点,依据多道相关中衡量多道信号相似性的能量比标准,对叠加过程加以控制,压制变换中出现的假频.本文用该方法对合成地震记录进行了波场分离,取得了较好的效果.     

混合域高分辨率抛物Radon变换及在衰减多次波中的应用

高分辨率Radon变换存在计算效率和分辨率不能兼得的困境.时间域算法可以获得很高的分辨率,但计算效率非常低;频率域算法具有良好计算效率,但分辨率不理想.为此发展了混合域高分辨率抛物Radon变换,即对频率域抛物Radon变换引入时变的稀疏权.本文给出了一种新的混合域高分辨率抛物Radon变换实现方法,并将该算法应用于叠前数据衰减多次波.文中给出了Radon变换和衰减多次波的流程.理论和实际数据算例表明本文方法既有较高的分辨率又有很高的计算效率.     

3D高阶抛物Radon变换在不规则地震数据保幅重建中的应用

3D地震数据不规则采样缺失重建是地震勘探数据处理流程中的重要问题.本文提出了一种基于具有保幅特性的非均匀高阶抛物Radon变换（NHOPRT）地震数据重建方法.在最小二乘反演方程中引入Delaunay三角网格剖分来计算空间不规则加权系数,从而获得最接近完整规则数据的高阶抛物Radon变换域系数.在用SVD求解反演方程过程中,利用高阶抛物Radon变换算子在频率域为指数函数,具有线性可分解特性,将二维空间的高阶抛物Radon变换算子分解为两个独立的一维空间变换算子,减小了变换算子的矩阵大小,从而很大程度地提高了计算效率.理论模型和实际地震数据重建测试证明了本文方法的有效性以及实用性.

     

3D高阶抛物Radon变换在不规则地震数据保幅重建中的应用

3D地震数据不规则采样缺失重建是地震勘探数据处理流程中的重要问题.本文提出了一种基于具有保幅特性的非均匀高阶抛物Radon变换（NHOPRT）地震数据重建方法.在最小二乘反演方程中引入Delaunay三角网格剖分来计算空间不规则加权系数,从而获得最接近完整规则数据的高阶抛物Radon变换域系数.在用SVD求解反演方程过程中,利用高阶抛物Radon变换算子在频率域为指数函数,具有线性可分解特性,将二维空间的高阶抛物Radon变换算子分解为两个独立的一维空间变换算子,减小了变换算子的矩阵大小,从而很大程度地提高了计算效率.理论模型和实际地震数据重建测试证明了本文方法的有效性以及实用性.     

基于改进线性Radon变换的井孔地震上下行波场分离方法

反射波场分离是井孔地震资料处理中极其重要的一个环节,波场分离的质量直接影响成像结果的精度.不管是VSP还是井间地震资料,其反射波时距曲线都近似直线型,根据这一特征,本文提出一种改进的线性Radon变换方法来进行井孔资料的反射波上下行波场分离.该方法基于频率域线性Radon变换,通过引入一个新的变量λ来消除变换算子对频率的依赖性,避免了求取每一频率分量对应的不同变换算子,显著降低了计算成本;文中在求解该方法对应的最小二乘问题时,引入了发展较为成熟的高分辨率Radon变换技术来进一步提高波场分离的精度.采用本文方法进行井孔地震资料的上下行波场分离可以在保证分离精度的前提下有效地提高计算效率.根据上下行波在λ-f域内分布的特殊性,设计简单的滤波算子就可实现上下行波场的分离.最后通过合成数据试算以及实际资料处理（VSP数据和井间地震数据）验证了该方法的可行性和有效性.     

基于保幅拉东变换的多次波衰减

为在去除多次波时有效保护地震一次反射波数据的AVO现象,给后续反演、解释提供准确的地震数据,本文提出了一种基于保幅拉东变换的多次波衰减方法,该方法是对常规抛物拉东变换的修改,把常规的稀疏拉东变换在拉东域分成两部分：一部分用于模拟零偏移距处的反射波能量,增加的另一部分用于模拟反射波振幅的AVO特性.该方法不仅考虑了反射波同相轴的形状,还考虑了反射波同相轴振幅幅度的变化,从而可把反射波信息进行有效转换,进而有利于多次波的消除,更好地恢复有效波的能量.在把地震数据由时间域转换到拉东域时,本文采用了IRLS算法实现保幅拉东算子的反演.模型数据和实际地震道集的试算分析表明,与常规拉东变换相比,保幅拉东变换在去除多次波的同时可有效保护一次反射波的AVO现象.     

各向异性Radon变换及其在多次波压制中的应用

即使采用分辨率很高的双曲Radon变换,对速度各向异性发育介质及长偏移距情况下的地震数据,其Radon域内能量仍不收敛.为了克服此难题,我们在Radon变换的积分路径中考虑了非双曲走时的影响,通过引入非双曲时差公式中的各向异性非椭圆率η参数,可以准确描述出长偏移距条件下来自同一层位的时距曲线,并推导了由偏移距、慢度、非椭圆率三参数控制的积分曲线正反变换公式,我们称之为各向异性Radon变换.离散化求解时,各向异性Radon变换是时变的,频率域快速算法已不适用,本文采用了最优相似系数加权Gauss-Seidel迭代算法,保持其计算精度的同时也有较高的计算效率.将此方法应用在模型数据以及实际长偏移距海上地震数据的多次波压制处理中,收到了较好的处理效果.     

Three-parameter Radon transform in layered transversely isotropic media

Radon transform is a powerful tool with many applications in different stages of seismic data processing, because of its capability to focus seismic events in the transform domain. Three-parameter Radon transform can optimally focus and separate different seismic events, if its basis functions accurately match the events. In anisotropic media, the conventional hyperbolic or shifted hyperbolic basis functions lose their accuracy and cannot preserve data fidelity, especially at large offsets. To address this issue, we propose an accurate traveltime approximation for transversely isotropic media with vertical symmetry axis, and derive two versions of Radon basis functions, time-variant and time-invariant. A time-variant basis function can be used in time domain Radon transform algorithms while a time-invariant version can be used in, generally more efficient, frequency domain algorithms. Comparing the time-variant and time-invariant Radon transform by the proposed basis functions, the time-invariant version can better focus different seismic events; it is also more accurate, especially in presence of vertical heterogeneity. However, the proposed time-invariant basis functions are suitable for a specific type of layered anisotropic media, known as factorized media. We test the proposed methods and illustrate successful applications of them for trace interpolation and coherent noise attenuation.     

基于波动方程预测和双曲Radon变换联合压制表面多次波

基于波动方程预测的表面多次波压制方法可处理复杂地下介质的地震资料,但计算成本较高.基于滤波的多次波压制方法计算效率较高,但其成功应用仅局限于一次波和多次波有明显时差差别的地震数据,对来自速度逆转等复杂介质数据则较难获得满意的压制效果.本文将波动方程预测的反馈迭代法和滤波法有效结合,采用GPU(图形处理器)和CPU协同并行加速计算粗略预测表面多次波,随后在双曲Radon域比较分析原始数据和预测的多次波,设计合理有效的Butterworth型自适应滤波器,滤出原始数据Radon域中的多次波能量,进行Radon反变换后,在时空域将多次波从原始数据中减去,得多次波压制结果.文中对理论模拟的单炮数据、复杂的SMAART模型以及实际地震数据进行了计算,结果表明,结合基于波动方程预测和双曲Radon变换的方法有效突破了两种方法各自的局限性,可高效高精度地压制复杂地下介质的表面多次波.     

基于波动方程预测和双曲Radon变换联合压制表面多次波

基于波动方程预测的表面多次波压制方法可处理复杂地下介质的地震资料,但计算成本较高.基于滤波的多次波压制方法计算效率较高,但其成功应用仅局限于一次波和多次波有明显时差差别的地震数据,对来自速度逆转等复杂介质数据则较难获得满意的压制效果.本文将波动方程预测的反馈迭代法和滤波法有效结合,采用GPU(图形处理器)和CPU协同并行加速计算粗略预测表面多次波,随后在双曲Radon域比较分析原始数据和预测的多次波,设计合理有效的Butterworth型自适应滤波器,滤出原始数据Radon域中的多次波能量,进行Radon反变换后,在时空域将多次波从原始数据中减去,得多次波压制结果.文中对理论模拟的单炮数据、复杂的SMAART模型以及实际地震数据进行了计算,结果表明,结合基于波动方程预测和双曲Radon变换的方法有效突破了两种方法各自的局限性,可高效高精度地压制复杂地下介质的表面多次波.     

角度域广义Radon变换多参数非迭代线性反演

基于Born近似的线性反演是当前流行的定量化地震成像与反演方法, 然而, 现有线性反演方法存在多种不可避免的问题, 比如迭代计算成本过高, 背景模型依赖, 以及多参数提取不确定/不稳定.为避免这些问题, 本文提出了角度域广义Radon变换(AD-GRT)多参数非迭代反演方法(2D声波双参数介质).AD-GRT是一种地震数据与角度域模型之间的积分变换, 该角度域模型能够保留地震散射数据的完整信息.基于该角度域模型, 地震数据可被精确重建, 即使背景模型是错误的.介质双扰动参数可在角度域模型中准确且稳定提取.为解决传统角度域离散方法存在的幅值震荡和不连续问题, 设计了两种有效的角度域离散单元分裂方法, 实现了平滑连续的角度域幅值提取.为提高AD-GRT反演的分辨率, 考虑了震源子波反滤波.利用三个数值模型验证了AD-GRT在角度域模型反演、数据重建、多参数提取方面的有效性.

     

High-resolution frequency-domain Radon transform and variable-depth streamer data deghosting

Receiver ghost reflections adversely affect variable-depth streamer (VDS) data acquisition. In addition, the frequency notches caused by the interference between receiver ghosts and primary waves strongly affect seismic data processing and imaging. We developed a high-resolution Radon transform algorithm and used it to predict receiver ghosts from VDS data. The receiver ghost reflections are subtracted and removed from the raw data. We propose a forward Radon transform operator of VDS data in the frequency domain and, based on the ray paths of the receiver ghosts, we propose an inverse Radon transform operator. We apply the proposed methodology to model and field data with good results. We use matching and subtracting modules of commercially available seismic data processing software to remove the receiver ghosts. The frequency notches are compensated and the effective frequency bandwidth of the seismic data broadens.     

Antialiasing conditions in the delay‐time Radon transform

The delay‐time Radon transform parametrizes coherent events in a seismic gather by the far‐offset trace delay time, instead of the conventional parabolic curvature or ray parameter. The reformulation may give a different physical insight into the aliasing effect in the Radon transformation and may also lead to a different algorithm. The delay‐time parametrization enables modelling of a seismic gather as the sum of coherent events with any form of moveout curve. For example, a parabolic curve can be used for traces within a moderate offset range and a linear moveout for far‐offset traces. When using this delay‐time Radon transform, it is the number of traces, rather than the spatial sampling, of the input gather that directly controls aliasing in the Radon transform image. A preconditioning operator that implicitly increases the number of input traces by spatial reconstruction (without physically performing the spatial resampling) may minimize aliasing noise in the Radon transform image.     

Fast hyperbolic deconvolutive Radon transform using generalized Fourier slice theorem

The hyperbolic Radon transform has a long history of applications in seismic data processing because of its ability to focus/sparsify the data in the transform domain. Recently, deconvolutive Radon transform has also been proposed with an improved time resolution which provides improved processing results. The basis functions of the (deconvolutive) Radon transform, however, are time-variant, making the classical Fourier based algorithms ineffective to carry out the required computations. A direct implementation of the associated summations in the time–space domain is also computationally expensive, thus limiting the application of the transform on large data sets. In this paper, we present a new method for fast computation of the hyperbolic (deconvolutive) Radon transform. The method is based on the recently proposed generalized Fourier slice theorem which establishes an analytic expression between the Fourier transforms associated with the data and Radon plane. This allows very fast computations of the forward and inverse transforms simply using fast Fourier transform and interpolation procedures. These canonical transforms are used within an efficient iterative method for sparse solution of (deconvolutive) Radon transform. Numerical examples from synthetic and field seismic data confirm high performance of the proposed fast algorithm for filling in the large gaps in seismic data, separating primaries from multiple reflections, and performing high-quality stretch-free stacking.     

Time-domain hyperbolic Radon transform for separation of P-P and P-SV wavefields

A time-domain hyperbolic Radon transform based method for separating multicomponent seismic data into P-P and P-SV wavefields is presented. This wavefield separation method isolates P-P and P-SV wavefields in the Radon panel due to their differences in slowness, and an inverse transform of only part of the data leads to separated wavefields. A problem of hyperbolic Radon transform is that it works in the time domain entailing the inversion of large operators which is prohibitively time-consuming. By applying the conjugate gradient algorithm during the inversion of hyperbolic Radon transform, the computational cost can be kept reasonably low for practical application. Synthetic data examples prove that P-P and P-SV wavefield separation by hyperbolic Radon transform produces more accurate separated wavefields compared with separation by high-resolution parabolic Radon transform, and the feasibility of the proposed separation scheme is also verified by a real field data example.     

基于拉东变换的瑞雷面波频散分析与应用

为克服面波谱分析法(SASW)提取频散曲线抗干扰能力差、不能得到多模式频散曲线等缺点,对拉东变换法进行了改进,不对原始记录进行数字处理,避免了数字处理效应的影响.通过对信号的频谱分析、结合场地的地质条件,选择频散分析的频率、速度范围,来达到规避高视速度的直达波、反射波.理论模型合成记录和实际资料的处理表明:研究的频散分析方法是有效的且适应性强,取得了较好的效果.