铜陵包村金(铜)矿床中胶状黄铁矿矿物学及成因解析

黄铁矿是安徽铜陵包村金(铜)矿床中主要硫化物,对热液成因的显晶质黄铁矿已有大量研究,而胶状黄铁矿研究较少且成因存在争议.本文以粉晶X射线衍射、扫描电镜(SEM)、透射电镜(TEM)以及拉曼光谱(RS)为主要研究方法和手段,对包村金(铜)矿床中胶状黄铁矿的矿物组成和微结构进行研究.包村胶状黄铁矿主要由黄铁矿组成,含有白铁...     

北大西洋Logatchev热液区多形貌黄铁矿特征及其意义

北大西洋Logatchev热液区产出的黄铁矿形貌丰富、成分各异,极具特殊性和代表性.运用扫描电镜和电子探针系统观测黄铁矿矿物学特征,发现粒状黄铁矿粒径不一,具高Fe、S,低微量元素的特点;草莓状黄铁矿见有松散莓体、球形-次球形莓体和自形结构莓体,其Cu含量总体较高,不同晶体特征的莓体成分存在差异;胶状黄铁矿见有多层环带,内核到环带由纳微米晶体聚合生成,由内到外成分具有S/Fe比、Zn含量减小,As含量增大的趋势.分析认为早期粒状黄铁矿是在较高温度下的热液体系中直接形成,随热液作用衰减,生成的粒状黄铁矿多呈纳-微米晶产出;草莓状黄铁矿是由松散纳-微米晶逐步聚集形成,受溶液过饱和度影响,莓体粒度和聚集程度存在差异;胶状黄铁矿多晶聚集环带生长方向是由内向外的,聚集程度差异指示沉积环境的反复交替.研究区多形貌黄铁矿具有由分散的微晶→多晶聚合体→自形单晶的完整演化系列特征,对于解读现代海底热液活动的方式和特点,揭示纳米晶体-宏观晶体的演化过程有积极意义.      

安徽铜陵矿集区铜官山矿田胶状黄铁矿矿物学特征及其对成矿作用的制约

铜官山矿田是铜陵矿集区内五大矿田之一,矿田内顺层产出的层状硫化物矿体是铜金矿床的主矿体,矿体内含有较多的胶状黄铁矿,其成因的争议制约了对铜金矿床成矿作用的解析。本文主要利用场发射扫描电镜(FE-SEM)等纳米矿物学手段,并结合光学显微镜、粉晶X射线衍射(XRD)、微区激光拉曼光谱分析等方法,对矿田内铜官山矿床及天马山矿床内层状硫化物矿体中胶状黄铁矿矿石的矿物组成、微形貌、微结构等特征进行系统研究,结果表明胶状黄铁矿矿石多呈胶状、鲕状结构,具有同心环状构造,同心环被赤铁矿、菱铁矿与黄铜矿脉穿切。同心环主要由白铁矿+有机质与胶状黄铁矿交替组成。胶状黄铁矿的黄铁矿颗粒粒径从纳米至亚微米均有分布,以自形-半自形立方体为主,少数呈他形,脉体边部胶状黄铁矿颗粒较大,自形程度较高,重结晶显著。矿石中含有少量白云石、伊利石微晶体,与胶状黄铁矿紧密共存,显示典型沉积特征。共存石英磨圆度较高,存在次生加大现象,表面存在胶状黄铁矿印模,显示为碎屑成因。这些综合信息表明胶状黄铁矿非岩浆热液成因,而是与石炭系地层同沉积成岩成因,并可能有微生物作用参与。高孔隙率、高化学活性及较高有机质含量的胶状黄铁矿可能为燕山期岩浆热液演化的含铜成矿流体提供了沉淀剂,对矿田内铜金硫化物矿体的层控性发挥了重要的控制作用。     

安徽铜陵冬瓜山矿床中磁黄铁矿矿石结构特征及其成因意义

安徽铜陵冬瓜山矿床是长江中下游地区具有代表性的大型层状硫化物矿床,磁黄铁矿为矿床中的主要硫化物矿物.该矿床主要由层状硫化物矿体组成,伴有矽卡岩型和斑岩型矿体.在层状矿体上部,磁黄铁矿主要为块状构造,而层状矿体下部,磁黄铁矿多为层纹状、条带状构造,具有显著的沉积结构构造特征.野外地质观察及室内矿相学研究表明,层状矿体中磁黄铁矿矿石遭受了强烈的变质作用及热液交代作用.进变质过程中形成的结构主要为胶黄铁矿转变为黄铁矿以及进一步变质转变为磁黄铁矿、磁铁矿时形成的交代残留结构.退变质过程则以磁黄铁矿的退火、黄铁矿变斑晶的生长和单纯六方磁黄铁矿的形成为特征.岩浆热液对单纯六方磁黄铁矿的交代作用形成了单斜和六方磁黄铁矿的交生结构.这些结构特征表明层状矿体中的磁黄铁矿并不是岩浆热液成因,而主要为石炭纪同生沉积胶黄铁矿、黄铁矿在燕山期岩浆侵入所引起的热变质作用下脱硫所形成,并在热变质作用之后又受到岩浆热液的叠加交代.磁黄铁矿的结构特征显示冬瓜山矿床的形成经历了同生沉积、热变质、热液交代等多个阶段,支持其为同生沉积-叠加改造型矿床.     

Sequence of mineral formation in clastic ores of the Saf’yanovka volcanic-hosted copper massive sulfide deposit,the Central Urals

The bedded clastic ore widespread on the slopes and flanks of the deeply eroded sulfide mound at the Saf’yanovka volcanic-hosted copper massive sulfide deposit consists of products of destruction of the Paleozoic black smoker along with diverse newly formed sulfides. The size of ore clasts gradually decreases with distance from the massive ore mound, from more than tens of centimeters to a few millimeters. The clastic sediments are characterized by good preservation of sulfide material composed of hydrothermal sedimentary colloform pyrite, chalcopyrite with lamellae of relict isocubanite, and concentrically zoned sphalerite. Numerous pyrite framboids, nodules, and euhedral crystals; chalcopyrite segregations; and twinned sphalerite are typical of sulfide-bearing black shale. Enargite, tennantite, and galena were formed after pyrite, filling interstices between nodules or partially replacing and corroding the previously formed minerals. The interrelations between minerals show that the fine-clastic sulfide-bearing black shale underwent diagenesis in the presence of organic matter.     

江西武山铜矿床海底喷流与岩浆热液叠加成矿作用: 控矿地质条件、矿石结构构造与矿床地球化学制约

长江中下游成矿带存在一套产于泥盆系五通组砂岩和石炭系黄龙组白云质灰岩层间的层状含铜硫化物矿体,对其成因存在很大争议。本文以产出典型层状矿体的武山铜矿为解剖重点,结合区域控矿地质要素、矿石结构构造特征及矿石中黄铁矿的稀土元素地球化学,提出层状矿体是海底喷流同生沉积与岩浆热液叠加成矿作用的产物。对武山铜矿层状矿体中的胶黄铁矿和黄铁矿、矽卡岩矿体中黄铁矿和脉状矿体中黄铁矿进行的稀土元素含量分析发现,从层状矿体胶黄铁矿、层状矿体黄铁矿、到矽卡岩和脉状矿体黄铁矿,稀土总量和稀土配分曲线显示递变规律,即层状矿体胶黄铁矿具有较低的稀土总量和轻重稀土分异不明显的较平坦型配分曲线;而矽卡岩和脉状矿体黄铁矿具有较高的稀土总量和轻重稀土分异较明显的右倾型配分曲线。层状矿体黄铁矿的稀土特征则介于两者之间,反映了岩浆热液的叠加作用。根据矿物组合共生关系及矿石结构构造的研究,可将武山铜矿黄铁矿分为3个期次:I期为微球粒、草莓状、条带状、纹层状沉积型黄铁矿; II期为半自形、自形粒状和港湾状黄铁矿,可见与长英质斑晶、岩屑或晶屑凝灰岩伴生或共生, 说明黄铁矿形成与同沉积期火山凝灰岩的密切关系。III期为块状、粗晶状、碎裂状黄铁矿。黄铜矿的形成晚于I、II期黄铁矿,成微粒状、脉状交错穿插或包裹早期球粒状、粒状黄铁矿及长英质矿物。对新发现的灰泥丘构造的详细研究表明,武山铜矿中含矿的灰泥丘与武山外围乌石街出露的不含矿的灰泥丘具有不同的特征,其中前者具有封闭的孔洞系统,而后者为开放的孔洞系统。总之,武山铜矿控矿地质条件、矿石结构构造及不同类型矿石黄铁矿的稀土元素证据表明矿床存在两期成矿事件,即海西期海底喷流同生沉积成矿期和燕山期岩浆热液叠加成矿期。     

Setting,sulfur isotope variations,and metamorphism of Jurassic massive Zn‐Pb‐Ag sulfide mineralization associated with arc‐type volcanism (Skra,Vardar zone, Νorthern Greece)

Massive Zn‐Pb‐Ag sulfide mineralization appears conformable with felsic volcanism, developed in an Upper Jurassic volcanic arc to the Southwest (SW) of the Serbo‐Macedonian continent in Northern Greece. The host volcanic sequence of the mineralization comprises mylonitized rhyolitic to rhyodacitic lavas, pyroclastics, quartz‐feldspar porphyries, and cherty tuffs. A “white mica—quartz—pyrite” mineral assemblage characterizes the volcanic rocks in the footwall and hanging‐wall of massive sulfide ore layers, formed as a result of greenschist‐grade regional metamorphism on “clay‐quartz‐pyrite” hydrothermal alteration haloes. Massive ore lenses are usually underlain by deformed Cu‐pyrite and quartz‐pyrite stockworks. Most of the sulfide ore bodies have proximal‐type features. Ductile deformation and regional metamorphism have transformed many of the stockwork structures. The mineralization is characterized by high Zn, Pb, and Ag contents, while Cu and critical metals are low. Primary depositional textures, for example, layering, clastic pyrite, colloform, and atoll textures were identified. The overall textural features of the mineralization indicate it has undergone mechanical deformation. The most prominent features of the effects of metamorphism, folding and shearing, are modification of the ore body morphology toward flattened and boudinage structures and transformation of the ore textures toward the dominance of planar fabrics. Sulfur isotope analyses of sulfides along with textural observations are consistent with a dual source of sulfide sulfur. Sulfur isotope values for sphalerite, non‐colloform pyrite, galena, and chalcopyrite fall in a limited range from ?1.6 to +4.8‰ (mean δ³⁴S + 2‰), indicating a hydrothermal source derived from the reduction of coeval seawater sulfate in the convective system. Pyrites with colloform and atoll textures are characterized by a ³⁴S depletion, indicating a bacterial reduction of coeval seawater sulfate. The morphology of ore beds, the mineralogy, sulfide textures, and ore chemistry along with the petrology and tectonic setting of the host rocks can be attributed to typical of a bimodal‐felsic metallogenesis. Although similar in many respects to classic Kuroko‐type volcanogenic massive sulfide mineralization, it has some atypical features, like the absence of barite ore, which is possibly a result of significant temporal depletion in sulfate due to bacterial reduction, a conclusion supported by the widespread occurrence of colloidal and atoll textures of pyrite.     

Growth Pattern and Its Indication of Spheroidal Nano-Micro Crystal Aggregates of Pyrite in the Baiyunpu Pb-Zn Polymetallic Deposit,Central Hunan

The Baiyunpu deposit lies in the southwest plunging Dachengshan anticline in central Hunan, which is a large Pb-Zn polymetallic deposit. The orebodies were surrounded by the Qiziqiao Formation limestone in the Middle Devonian, and its geological occurrence is consistent with the wall rocks. A large number of spheroidal pyrite aggregates are found unevenly distributed in the ores. The spheroidal aggregates are made up of kernels and concentric rings. The kernels are composed of approximately epigranular pyrite nanocrystals, while the rings are composed of accumulated pyrite microcrystals growing along the radial direction. The spheroidal pyrite aggregate and its outer zones can be divided into five areas(A–E). The results of electron probe micro analysis(EPMA) show that from the zone A1 to B, Co/Ni 1, the sum of Co and Ni is 0.08%–0.26%, S/Fe increases from 2.06 to 2.15. While from the zone C to E, Ni cannot be detected and S/Fe decreases from 2.22 to 2.08. Powder X-ray diffraction(XRD) analysis in the micro zone shows obvious crystalline characteristics in the aggregates. Moving from the inside outwards, the maximum diffraction peak intensity of the(111) and(220) crystal planes of pyrite increases, and the crystallinity improves. The degree of change in the(111) plane is the most prominent. Considering the theory of crystal growth along with the geologic features of the depositional environment where the spheroidal pyrite aggregates developed, we confirm that the spheroidal aggregates are the result of nano-micro crystalline gathering and growth occurring by the following sequence of processes:nano-crystalline nucleation and growth, gathering into a ball, oriented growth of microcrystals, continuous accumulation, and adjustment of grain boundaries. The formation of the spheroidal pyrite aggregates in the late Qiziqiao Formation of the Middle Devonian occurred in a neutral to weak alkaline and reductive sedimentary environment in the normal oxygen-rich shallowwater carbonate platform edge. The variations in the S/Fe ratio and crystallisation characteristics indicate that during pyrite crystal growth, the sulphur fugacity was high locally and rose constantly, the degree of supersaturation decreased locally and the growth environment was stable relatively.     

华南型块状硫化物矿床中的胶黄铁矿及其退火作用

华南型块状硫化物矿床中胶黄铁矿的退火过程从早到晚可分成三个阶段:原始晶化变胶体阶段、不等粒变晶生长阶段和颗粒界面调整阶段。不同阶段的矿石各具特征性的结构,反映了燕山期侵入活动对于先存胶黄铁矿的不同程度热效应。     

湖南龙山金锑矿黄铁矿微量元素特征及其对成矿过程的指示

黄铁矿中的微量元素含量既可提供元素赋存状态的信息,又可示踪热液成矿过程。利用电子探针对龙山金锑矿赋矿地层新鲜板岩、蚀变围岩以及矿石中黄铁矿的多种微量元素进行了分析,研究结果表明:沉积黄铁矿中Au主要以纳米颗粒形式存在;热液黄铁矿中既有固溶体金,也有纳米金。沉积黄铁矿中Co、Ni、Sb、Mn、Te可能以固溶体形式存在,As、Pb、Zn、Cu、Ag以包裹体形式存在;热液黄铁矿中As、Sb、Mn、Te可能以固溶体的形式存在,Co、Ni、Pb、Zn、Cu、Ag以矿物包裹体形式存在。龙山金锑矿至少经历了两个成矿期:早期是由深部的富Ni岩浆流体引发的金、铅、铜、钨矿化,该期矿化强度不大;晚期是以大气降水循环引起的金、锑矿化,是龙山金锑矿的主要成矿期,并大致可分为显微金阶段、次显微金辉锑矿阶段、可见金辉锑矿阶段和辉锑矿阶段4个成矿阶段。     

粤北晚古生代盆地压实流体的性状

盆地构造演化、流体系统、矿化作用是当代矿床学研究的新课题。盆地演化过程中,压实流体系统温度场、动力场和地球化学场可以通过地质研究和数字模拟来重塑。粤北晚古生代沉积盆地存在三种类型的矿化流体。大宝山型流体与岩浆热动力作用有关,形成海底火山热液沉积多金属矿床;凡口型流体与深部建造的循环热液有关,形成中低温海底热泉喷溢沉积铅锌银汞矿床;红岩型流体与盆地成岩压实水有关,形成低温单一黄铁矿矿床。粤北晚古生代盆地沉积物主要由透水性较好的粗碎屑物质和碳酸盐组成,沉积建造厚度较薄,数字模拟结果表明,盆地压实流体系统难以形成较高的地热储和流体势,不可能形成自身的突发喷溢。但在同生断裂作用引导下,流体在沉积层的特殊部位汇聚形成红岩型低温黄铁矿矿床。     

Petrography, mineralogy and geochemistry of the Zarshuran Carlin-like gold deposit, northwest Iran

Gold mineralisation at Zarshuran, northwestern Iran, is hosted by Precambrian carbonate and black shale formations which have been intruded by a weakly mineralised granitoid. Granitoid intrusion fractured the sedimentary rocks, thereby improving conditions for hydrothermal alteration and mineralisation. Silicification is the principal hydrothermal alteration along with decalcification and argillisation. Three hydrothermal sulphide mineral assemblages have been identified: an early assemblage of pyrrhotite, pyrite and chalcopyrite; then widespread base metal sulphides, lead-sulphosalts and zoned euhedral arsenical pyrite; and finally late network arsenical pyrite, massive and colloform arsenical pyrite, colloform sphalerite, coloradoite, and arsenic–antimony–mercury–thallium-bearing sulphides including orpiment, realgar, stibnite, getchellite, cinnabar, lorandite and a Tl-mineral, probably christite. Most of the gold at Zarshuran is detectable only by quantitative electron microprobe and bulk chemical analyses. Gold occurs mainly in arsenical pyrite and colloform sphalerite as solid solution or as nanometre-sized native gold. Metallic gold is found rarely in hydrothermal quartz and orpiment. Pure microcrystalline orpiment, carbon-rich shale, silicified shale with visible pyrite grains and arsenic minerals contain the highest concentrations of gold. In many ways Zarshuran appears to be similar to the classic Carlin-type sediment-hosted disseminated gold deposits. However, relatively high concentrations of tellurium at Zarshuran, evidenced by the occurrence of coloradoite (HgTe), imply a greater magmatic contribution in the mineralising hydrothermal solutions than is typical of Carlin-type gold deposits. Received: 13 May 1999 / Accepted: 2 February 2000     

粤北盆地流体系统及其矿化特征

盆地构造演化流体系统矿化作用是当代矿床学研究的新课题。盆地演化过程 ,压实流体系统温度场、动力场和地球化学场可以通过地质研究和数字模拟来重塑。粤北晚古生代沉积盆地存在 3种类型的矿化流体。大宝山型流体与岩浆热动力作用有关 ,形成海底火山热液沉积多金属矿床 ;凡口型流体与深部建造的循环热液有关 ,形成中低温海底热泉喷溢沉积铅锌银汞矿床 ;红岩型流体与盆地成岩压实水有关 ,形成低温单一黄铁矿矿床。红岩地区盆地压实流体系统在盆缘古隆起地段形成红岩型黄铁矿矿带的同时 ,还形成特征的白云岩化作用。白云岩产状和组构、白云石“亮边”和“雾心”特征及地球化学特征表明 ,红岩型诸矿床的成因与盆地沉积物压实过程形成的流体有关     

Mineralogy and geochemistry of banded iron formation and iron ores from eastern India with implications on their genesis

The geological complexities of banded iron formation (BIF) and associated iron ores of Jilling-Langalata iron ore deposits, Singhbhum-North Orissa Craton, belonging to Iron Ore Group (IOG) eastern India have been studied in detail along with the geochemical evaluation of different iron ores. The geochemical and mineralogical characterization suggests that the massive, hard laminated, soft laminated ore and blue dust had a genetic lineage from BIFs aided with certain input from hydrothermal activity. The PAAS normalized REE pattern of Jilling BIF striking positive Eu anomaly, resembling those of modern hydrothermal solutions from mid-oceanic ridge (MOR). Major part of the iron could have been added to the bottom sea water by hydrothermal solutions derived from hydrothermally active anoxic marine environments. The ubiquitous presence of intercalated tuffaceous shales indicates the volcanic signature in BIF. Mineralogical studies reveal that magnetite was the principal iron oxide mineral, whose depositional history is preserved in BHJ, where it remains in the form of martite and the platy hematite is mainly the product of martite. The different types of iron ores are intricately related with the BHJ. Removal of silica from BIF and successive precipitation of iron by hydrothermal fluids of possible meteoric origin resulted in the formation of martite-goethite ore. The hard laminated ore has been formed in the second phase of supergene processes, where the deep burial upgrades the hydrous iron oxides to hematite. The massive ore is syngenetic in origin with BHJ. Soft laminated ores and biscuity ores were formed where further precipitation of iron was partial or absent.     

Electrochemical study of hydrothermal and sedimentary pyrite dissolution

The dissolution of pyrite is of interest in the formation of acid mine drainage and is a complex electrochemical process. Being able to measure the rate of dissolution of particular pyrite samples under particular conditions is important for describing and predicting rates of AMD generation. Electrochemical techniques offer the promise of performing such measurements rapidly and with small samples. The oxidation of pyrite and the reduction of Fe³⁺ ions and/or O₂ half reactions involved in the pyrite dissolution process were investigated by cyclic voltammetry and steady-state voltammetry using three pyrite materials formed in both sedimentary and hydrothermal environments. For each sample, two kinds of pyrite working electrodes (conventional constructed compact solid electrode, and carbon paste electrode constructed from fine-grained pyrite particles) were employed. Results indicated that for both the hydrothermal and sedimentary pyrite samples the oxidation and reduction half reactions involved in dissolution were governed by charge transfer processes, suggesting that hydrothermal and sedimentary pyrites obey the same dissolution mechanism despite their different formation mechanisms. In addition, the results showed that it is feasible to use a C paste electrode constructed from fine-grained or powdered pyrite to study the pyrite dissolution process electrochemically and to derive approximate rate expressions from the electrochemical data.     

火山岩地区金矿的蚀变分带和成矿物理化学条件──成矿热流体与控矿环境相互作用过程的四维记录

本文主要讨论火山岩、次火山岩和相应侵入岩地区各类金矿的蚀变分带和形成条件，作者把成矿系统分为成矿热流体体系和控矿环境两个组成部分。热流体体系分成近地表和高侵位的两种类型，控矿系统分为火山中心控矿系统、高侵位岩体控矿系统和有区域性断裂系统复合的上述控矿系统。与近地表岩浆热流体体系有关的浅成热液金矿可分为低硫、高硫和富碲３个类型，与高侵位岩浆热流体体系有关的有斑岩型和浅成侵入体型。全面分析了与两种热流体体系有关的各类金矿产出的的地质环境、蚀变矿物组合的时、空分布，及其形成的地质和物理化学条件。提出了成矿热流体体系与控矿环境相互作用和进行物质能量交换过程的四维记录的新观点。     

Coupled trace element and SIMS sulfur isotope geochemistry of sedimentary pyrite:Implications on pyrite growth of Caixiashan Pb-Zn deposit

Colloform pyrite with core-rim texture is commonly deposited in carbonate platforms associated with the sulfide ores such as the Caixiashan Pb-Zn deposit.However,the genesis of colloform pyrite in Pb-Zn deposits,its growth controls and their geological implication are insufficiently understood.Integration of in-situ trace element and SIMS sulfur isotopes has revealed geochemical variations among these pyrite layers.These colloform pyrite occur as residual phases of core-rim aggregates,the cores are made up of very fine-grained anhedral pyrite particles,with some rims being made up of fine-grained and poorlycrystallized pyrite,while the other rims were featured with euhedral cubic pyrite.which are cemented by fine-grained calcite and/or dolomite with minor quartz.Sulfur isotope analysis shows that some wellpreserved rims have negative δ~(34)S values(-28.12‰to-0.49‰),whereas most of the cores and rims have positive δ~(34)S values(0 to+44.28‰;peak at+14.91‰).Integrating with the methane and sulfate were observed in previous fluid inclusion study,we suggest that the ~(34)S depleted rims were initially formed by bacteria sulfate reduction(BSR),whereas the positive δ~(34)S values were resulted from the sulfate reduction driven by anaerobic methane oxidation(AOM).The well-developed authigenic pyrite and calcite may also support the reaction of AOM.Combined with petrographic observations,trace element composition of the colloform pyrite reveals the incorporation and precipitation behavior of those high abundance elements in the pyrite:Pb and Zn were present as mineral inclusion and likely precipitated before Fe,as supported by the time-resolved Pb-Zn signal spikes in most of the analyzed pyrite grains.Other metals,such as Hg,Co and Ni,may have migrated as chloride complexes and entered the pyrite lattice.Arsenic and Sb,generally influenced by complex-forming reactions rather than substitution ones,could also enter the pyrite lattice,or slightly predate the precipitation of colloform pyrite as mineral inclusions,which are controlled by their hydrolysis constant in the ore fluids.The colloform pyrite may have grown inward from the rims.The successive BSR reaction process would enrich H_2~(32)S in the overlying water column but reduce the metal content,the nucleation of these pyrite rims was featured by strongly negative sulfur isotopes.The following AOM process should be activated by deformation like the turbidity sediment of the mudstone as the sulfide deposition are associated with fault activities that caused the emission of methane migration upward and simultaneously replenishing the metal in the column.The higher AOM reaction rate and the higher metal supply(not only Fe.but with minor other metals such as Pb and Zn) caused by sediment movement enhanced the metal concentration within the pyrite lattice.     

安徽铜陵冬瓜山铜矿床的叠加改造成矿机制：来自矿石结构的证据

长江中、下游地区块状硫化物矿床普遍受到燕山期岩浆及其热液的改造与叠加.本文以铜陵冬瓜山矿床为例,探讨这类矿床的成矿机制.该矿床主要由层状硫化物矿体组成,伴有矽卡岩型和斑岩型矿体.野外地质观察及室内矿相学的研究表明,冬瓜山层状矿体中矿石遭受了强烈的热变质作用及热液交代作用.进变质过程中形成的结构主要为黄铁矿受燕山期岩浆侵...     

湖南沃溪钨-锑-金矿床的矿石组构学特征及其成因意义

通过对湖南沃溪矿床的宏观至微观尺度上的矿石组构学研究，揭示出矿床系同生热水沉积成因。层状矿体、细脉状矿化以及围岩蚀变之间的空间关系，指示了矿石与其所赋存的围岩同时形成。矿床形成后的变质—变形作用，主要使矿物发生重结晶、碎裂、位错以及小范围的再活化等。     

重晶石沉积类型及成因评述--兼论扬子地区下寒武统重晶石的富集机制

重晶石沉积类型丰富,具有多种成因过程。通常,沉积型重晶石可分为生物、热液、成岩和冷泉重晶石四种类型。富钡与富硫酸盐的流体（海水、早成岩孔隙水或热液流体）及其相互作用过程（水柱、热液系统、沉积柱、沉积物-水界面附近）决定了重晶石的沉积环境、宏微观产出方式、同位素组成及相应的地质意义。另外,根据扬子地区下寒武统富重晶石沉积的地质特征,简述了其各种富集机制的适用性及争论。据此建议,结合埃迪卡拉纪-寒武纪转折时期的古海洋背景,对其进行详细的沉积学及地球化学分析,有助于深化成因认识,弥合分歧。