Crustal Structure across the Northwestern Margin of South China Sea: Evidence for Magma‐poor Rifting from a Wide‐angle Seismic Profile

We present results from a 484 km wide-angle seismic profile acquired in the northwest part of the South China Sea (SCS) during OBS2006 cruise. The line that runs along a previously acquired multi-channel seismic line (SO49-18) crosses the continental slope of the northern margin, the Northwest Subbasin (NWSB) of the South China Sea, the Zhongsha Massif and partly the oceanic basin of the South China Sea. Seismic sections recorded on 13 ocean-bottom seismometers were used to identify refracted phases from the crustal layer and also reflected phases from the crust-mantle boundary (Moho). Inversion of the traveltimes using a simple start model reveals crustal images in the study area. The velocity model shows that crustal thickness below the continental slope is between 14 and 23 km. The continental part of the line is characterized by gentle landward mantle uplift and an abrupt oceanward one. The velocities in the lower crust do not exceed 6.9 km/s. With the new data we can exclude a high-velocity lower crustal body (velocities above 7.0 km/s) at the location of the line. We conclude that this part of the South China Sea margin developed by a magma-poor rifting. Both, the NWSB and the Southwest Sub-basin (SWSB) reveal velocities typical for oceanic crust with crustal thickness between 5 and 7 km. The Zhongsha Massif in between is extremely stretched with only 6–10 km continental crust left. Crustal velocity is below 6.5 km/s; possibly indicating the absence of the lower crust. Multi-channel seismic profile shows that the Yitongansha Uplift in the slope area and the Zhongsha Massif are only mildly deformed. We considered them as rigid continent blocks which acted as rift shoulders of the main rift subsequently resulting in the formation of the Northwest Sub-basin. The extension was mainly accommodated by a ductile lower crustal flows, which might have been extremely attenuated and flow into the oceanic basin during the spreading stage. We compared the crustal structures along the northern margin and found an east-west thicken trend of the crust below the continent slope. This might be contributed by the east-west sea-floor spreading along the continental margin.     

Wilson cycle passive margins: Control of orogenic inheritance on continental breakup

Rifts and passive margins often develop along old suture zones where colliding continents merged during earlier phases of the Wilson cycle. For example, the North Atlantic formed after continental break-up along sutures formed during the Caledonian and Variscan orogenies. Even though such tectonic inheritance is generally appreciated, causative physical mechanisms that affect the localization and evolution of rifts and passive margins are not well understood.We use thermo-mechanical modeling to assess the role of orogenic structures during rifting and continental breakup. Such inherited structures include: 1) Thickened crust, 2) eclogitized oceanic crust emplaced in the mantle lithosphere, and 3) mantle wedge of hydrated peridotite (serpentinite).Our models indicate that the presence of inherited structures not only defines the location of rifting upon extension, but also imposes a control on their structural and magmatic evolution. For example, rifts developing in thin initial crust can preserve large amounts of orogenic serpentinite. This facilitates rapid continental breakup, exhumation of hydrated mantle prior to the onset of magmatism. On the contrary, rifts in thicker crust develop more focused thinning in the mantle lithosphere rather than in the crust, and continental breakup is therefore preceded by magmatism. This implies that whether passive margins become magma-poor or magma-rich, respectively, is a function of pre-rift orogenic properties.The models show that structures of orogenic eclogite and hydrated mantle are partially preserved during rifting and are emplaced either at the base of the thinned crust or within the lithospheric mantle as dipping structures. The former provides an alternative interpretation of numerous observations of ‘lower crustal bodies’ which are often regarded as igneous bodies. The latter is consistent with dipping sub-Moho reflectors often observed in passive margins.     

http://www.sciencedirect.com/science/article/pii/S1674987114001571

The paper discusses generation of volatile-bearing plumes in the mantle transition zone(MTZ) in terms of mineral-fluid petrology and their related formation of numerous localities of intra-plate bimodal volcanic series in Central and East Asia.The plume generation in the MTZ can be triggered by the tectonic erosion of continental crust at Pacific-type convergent margins and by the presence of water and carbon dioxide in the mantle.Most probable sources of volatiles are the hyclrated/carbonated sediments and basalts and serpentinite of oceanic slabs,which can be subducted down to the deep mantle.Tectonic erosion of continental crust supplies crustal material enriched in uranium and thorium into the mantle,which can serve source of heat in the MTZ.The heating in the MTZ induces melting of subducted slabs and continental crust and mantle upwelling,to produce OIB-type mafic and felsic melts,respectively.     

Seismic models of inner parts of the Euro-Asian continent and its margins

Analogies are drawn between continental and continental margin structures on the basis of seismic data on the crustal structure of Eurasia and its Atlantic margins. Crustal thinning from the inner parts of the continent to its margins is observed to be a general feature common to the formation of deep midland depressions and sedimentary basins of shelf zones. The latter are characterized by crustal thinning and its assimilation. These phenomena cannot be explained solely be sea-floor spreading effects in the process of active rifting and formation of oceanic crust. It appears that the main role in the formation of the margins in played by processes of mantle erosion in connection with heating at continental margins and with the migration of mantle material to the lower part of the crust.     

Accretionary nature of the crust of Central and East Java (Indonesia) revealed by local earthquake travel-time tomography

Reassessment of travel time data from an exceptionally dense, amphibious, temporary seismic network on- and offshore Central and Eastern Java (MERAMEX) confirms the accretionary nature of the crust in this segment of the Sunda subduction zone (109.5–111.5E). Traveltime data of P- and S-waves of 244 local earthquakes were tomographically inverted, following a staggered inversion approach. The resolution of the inversion was inspected by utilizing synthetic recovery tests and analyzing the model resolution matrix. The resulting images show a highly asymmetrical crustal structure. The images can be interpreted to show a continental fragment of presumably Gondwana origin in the coastal area (east of 110E), which has been accreted to the Sundaland margin. An interlaced anomaly of high seismic velocities indicating mafic material can be interpreted to be the mantle part of the continental fragment, or part of obducted oceanic lithosphere. Lower than average crustal velocities of the Java crust are likely to reflect ophiolitic and metamorphic rocks of a subduction melange.     

Gondwana breakup: Messages from the North Natal Valley

The Natal Valley, offshore Mozambique, is a key area for understanding the evolution of East Gondwana. Within the scope of the integrated multidisciplinary PAMELA project, we present new wide‐angle seismic data and interpretations, which considerably alter Geoscience paradigms. These data reveal the presence of a 30‐km‐thick crust that we argue to be of continental nature. This falsifies all the most recent palaeo‐reconstructions of the Gondwana. This 30‐km‐thick continental crust 1,000 m below sea level implies a complex history with probable intrusions of mantle‐derived melts in the lower crust, connected to several occurrences of magmatism, which seems to evidence the crucial role of the lower continental crust in passive margin genesis.     

Density model of the lithosphere in the Tsushima Basin, Sea of Japan

The 2-D density modeling of the sublatitudinal deep seismic sounding profile in the Tsushima Basin (Sea of Japan) was performed. The available data allow us to presume that the opening of the Tsushima Basin took place under conditions of an anomalously heated mantle that fostered emplacement of mantle material into the basinal crust and basin/continental margin transition zone of the Korean Peninsula attended by formation of the oceanic crust. The increased (relative to the normal oceanic crust) thickness of the basinal crust was conditioned by the accumulation of a large amount of terrigenous material and volcanogenic rocks in the upper part of the crust and underplating of mantle material in the crustal base.     

Lithospheric structure of the Southwest South China Sea: implications for rifting and extension

ABSTRACT

The South China Sea (SCS) is an excellent site for studying the process of conjugate margin rifting, and the origin and evolution of oceanic basins. Compared with the well-defined northern margin of the SCS, the western and southern segments of the SCS margin have not been researched in significant detail. To investigate the regional structure of the southwestern SCS, a gravity model is constructed, along with the lithospheric thermal structure along a wide-angle seismic profile. The profile extends across the conjugate margins of the Southwest Sub-Basin (SWSB) of the SCS and is based on the latest multiple geophysical measurements (including heat flow and thermo-physical parameters). The results show that the average thicknesses of the crust and thermal lithosphere along the profile are about 15 km and 57 km, respectively. The overall amount of extension of continental crust and lithosphere is more than 200 km. Thermal structure of the lithosphere shows that the continental margins are in a warm thermal state. The southwest SCS is characterized by ultra-wide, thinned continental crust and lithosphere, high Moho heat flow, early syn-rift faulted basins, undeformed late syn-rifting, and high seismic velocities in the lower crust. These various pieces of evidence suggest that the break-up of the mantle lithosphere occurred before that of the continental crust favouring a depth-dependent extension of the southwestern SCS margin.     

南海北部洋-陆过渡带深部结构与岩石圈破裂过程

洋-陆过渡带是理解大陆岩石圈破裂和海底初始扩张的关键位置,但是在南海北部地区仍然存在关于相关地质过程的诸多疑问.通过近年开展的国际大洋发现计划航次以及深部地质地球物理探测,取得以下4个方面的认识.（1）南海北部的洋-陆边界一般与自由空间重力异常的正-负值过渡位置对应,而更加准确地限定需要结合反射、折射地震资料.稳定大洋岩石圈生成与大陆岩石圈最终破裂之间的洋-陆过渡边界的位置比以往认为的还应往深海盆方向移动.（2）洋-陆过渡带代表了远端带构造作用减弱和岩浆作用逐渐增强的区域.陆坡地壳发育扩张后岩浆底侵、洋-陆过渡带发育同破裂期岩浆喷出结构和侵入反射体.（3）在中生代的古俯冲带弧前区域,新生代的断裂沿着早期的构造开始活动,岩石圈多处发生强烈的共轭韧性剪切作用.随着大陆岩石圈的进一步拉伸减薄,部分靠陆一侧的裂谷中心停止张裂,成为夭折裂谷,以台西南盆地南部凹陷、白云凹陷、西沙海槽为代表,而南海陆缘异常伸展和最终破裂的地方集中在南侧裂谷中心.夭折裂谷下亦发现地幔蛇纹石化,进一步反映了较弱的同破裂岩浆活动.（4）南海初始洋壳的增生沿着大陆边缘走向具有显著的变化,南海东北部洋-陆过渡带下伏地幔明显抬升和部分蛇纹石化,地震纵、横波速度以及折射波衰减特征都支持此观点,反映南海东北部是一个贫岩浆型大陆边缘.未来,南海北部洋-陆过渡带有望成为南海“莫霍钻”的理想备选钻探区.      

Continental breakup by detachment faulting: field evidence and geochronological constraints (Tasna nappe, Switzerland)

The Lower Tasna Detachment (LTD) is a low-angle fault contact between serpentinized peridotite below and continental basement above. It was formed during Jurassic to Early Cretaceous rifting of a Tethyan continental margin and later captured in a thrust nappe during Tertiary plate convergence. Foliated gabbro, gabbro mylonite, and granitoid mylonite occurring along the LTD record shearing under decreasing temperatures. U–Pb dating of zircon from the gabbro mylonite yielded a Permian age, interpreted as the age of gabbro intrusion, whereas the breakup of the passive margin occurred as late as Early Cretaceous. This suggests that the gabbro belongs to a prerift, lower to middle crustal intrusion 'smeared out' along the detachment by extensional faulting. The juxtaposition of mantle and upper crust along the Lower Tasna detachment may serve as a model for several seismic reflectors observed in distal passive continental margins (e.g. S reflector of the Galicia margin).     

关于大陆与陆缘的深部地震探查的进展──1994、1996年两届国际学术讨论会综述

连续两届国际深部地震讨论会成果累累。对深部地震的资料采集、处理、解释技术以及几类专门地质地球物理问题的研究进行了综述。研究成果在理论、方法方面是该领域的世界先进水平：在地震学应用于陆缘、陆壳与壳幔过渡带等地质问题方面有明显的提高。提出了值得讨论的问题，最后探讨了发展趋势     

青藏高原板内地震震源深度分布规律及其成因

青藏高原板内地震以浅源地震为主, 下地壳基本上没有地震, 地震震源多集中在15~40 km的深度范围, 主要在中地壳内, 呈似层状弥散分布.其中30~33 km深度是一个优势层, 与壳内分层有关.总体上青藏高原南、北部的震源面略呈相向倾斜特征.70~100 km深度区间出现了比较集中的震级较小的地震, 可能与壳幔过渡带的拆离作用有关.高原内部的正断层系与板内地震密切相关, 是板内浅源地震的主控构造.总之, 青藏高原地震震源沿着活动的上地壳脆性层与软弱层之间的脆-韧性过渡带分布.这些板内地震活动属于大陆动力学过程, 与板块碰撞和板块俯冲无关.初步认为青藏高原浅层到深层多震层的成因分别是韧性基底与脆性盖层、韧性下地壳与脆性上地壳、韧性下地壳与脆性上地幔的韧-脆性转换、拆离和解耦的产物.      

Crustal structure and transform margin development south of Svalbard based on ocean bottom seismometer data

The Barents Sea is located in the northwestern corner of the Eurasian continent, where the crustal terrain was assembled in the Caledonian orogeny during Late Ordovician and Silurian times. The western Barents Sea margin developed primarily as a transform margin during the early Tertiary. In the northwestern part south of Svalbard, multichannel reflection seismic lines have poor resolution below the Permian sequence, and the early post-orogenic development is not well known here. In 1998, an ocean bottom seismometer (OBS) survey was collected southwest to southeast of the Svalbard archipelago. One profile was shot across the continental transform margin south of Svalbard, which is presented here. P-wave modeling of the OBS profile indicates a Caledonian suture in the continental basement south of Svalbard, also proposed previously based on a deep seismic reflection line coincident with the OBS profile. The suture zone is associated with a small crustal root and westward dipping mantle reflectivity, and it marks a boundary between two different crystalline basement terrains. The western terrain has low (6.2–6.45 km s⁻¹) P-wave velocities, while the eastern has higher (6.3–6.9 km s⁻¹) velocities. Gravity modeling agrees with this, as an increased density is needed in the eastern block. The S-wave data predict a quartz-rich lithology compatible with felsic gneiss to granite within and west of the suture zone, and an intermediate lithological composition to the east. A geological model assuming westward dipping Caledonian subduction and collision can explain the missing lower crust in the western block by subduction erosion of the lower crust, as well as the observed structuring. Due to the transform margin setting, the tectonic thinning of the continental block during opening of the Norwegian-Greenland Sea is restricted to the outer 35 km of the continental block, and the continent–ocean boundary (COB) can be located to within 5 km in our data. Distinct from the outer high commonly observed on transform margins, the upper part of the continental crust at the margin is dominated by two large, rotated down-faulted blocks with throws of 2–3 km on each fault, apparently formed during the transform margin development. Analysis of the gravity field shows that these faults probably merge to one single fault to the south of our profile, and that the downfaulting dominates the whole margin segment from Spitsbergen to Bjørnøya. South of Bjørnøya, the faulting leaves the continental margin to terminate as a graben 75 km south of the island. Adjacent to the continental margin, there is no clear oceanic layer 2 seismic signature. However, the top basement velocity of 6.55 km s⁻¹ is significantly lower than the high (7 km s⁻¹) velocity reported earlier from expanding spread profiles (ESPs), and we interpret the velocity structure of the oceanic crust to be a result of a development induced by the 7–8-km-thick sedimentary overburden.     

苏北超高压变质带榴辉岩的对比性研究及成矿作用

苏北超高压变质带是秦岭—大别造山带的东延部分,所产出的榴辉岩有三种类型,分别为产于片麻岩中的G类榴辉岩、产于大理岩中的M类榴辉岩和产于蛇纹岩中P类榴辉岩。地球化学研究表明,三类榴辉岩的原岩复杂多样,源岩为下地壳或上地幔的基性-超基性岩,兼具大陆和大洋玄武岩的特征,富含TiO2等有用组分,是金红石矿床的成矿母岩。金红石矿床的形成是华北、扬子两大板块俯冲碰撞的结果,金红石成矿作用的强弱与岩性、构造、变质变形作用等密切相关。榴辉岩中含有金红石、钛铁矿、磷灰石、石榴子石、绿辉石等多种有用矿物,具有较高的综合利用价值。     

Crustal structure of the Levant Basin, eastern Mediterranean

A seismic refraction/wide-angle reflection experiment was undertaken in the Levant Basin, eastern Mediterranean. Two roughly east–west profiles extend from the continental shelf of Israel toward the Levant Basin. The northern profile crosses the Eratosthenes Seamount and the southern profile crosses several distinct magnetic anomalies. The marine operation used 16 ocean bottom seismometers deployed along the profiles with an air gun array and explosive charges as energy sources. The results of this study strongly suggest the existence of oceanic crust under portions of the Levant Basin and continental crust under the Eratosthenes Seamount. The seismic refraction data also indicate a large sedimentary sequence, 10–14 km thick, in the Levant Basin and below the Levant continental margin. Assuming the crust is of Cretaceous age, this gives a fairly high sedimentation rate. The sequence can be divided into several units. A prominent unit is the 4.2 km/s layer, which is probably composed of the Messinian evaporites. Overlying the evaporitic layer are layers composed of Plio–Pleistocene sediments, whose velocity is 2.0 km/s. The refraction profiles and gravity and magnetic models indicate that a transition from a two layer continental to a single-layer oceanic crust takes place along the Levant margin. The transition in the structure along the southern profile is located beyond the continental margin and it is quite gradual. The northern profile, north of the Carmel structure, presents a different structure. The continental crust is much thinner there and the transition in the crustal structure is more rapid. The crustal thinning begins under western Galilee and terminates at the continental slope. The results of the present study indicate that the Levant Basin is composed of distinct crustal units and that the Levant continental margin is divided into at least two provinces of different crustal structure.     

Crustal structure of the continental margin of Korea in the East Sea (Japan Sea) from deep seismic sounding data: evidence for rifting affected by the hotter than normal mantle

Despite the various opening models of the southwestern part of the East Sea (Japan Sea) between the Korean Peninsula and the Japan Arc, the continental margin of the Korean Peninsula remains unknown in crustal structure. As a result, continental rifting and subsequent seafloor spreading processes to explain the opening of the East Sea have not been adequately addressed. We investigated crustal and sedimentary velocity structures across the Korean margin into the adjacent Ulleung Basin from multichannel seismic (MCS) reflection and ocean bottom seismometer (OBS) data. The Ulleung Basin shows crustal velocity structure typical of oceanic although its crustal thickness of about 10 km is greater than normal. The continental margin documents rapid transition from continental to oceanic crust, exhibiting a remarkable decrease in crustal thickness accompanied by shallowing of Moho over a distance of about 50 km. The crustal model of the margin is characterized by a high-velocity (up to 7.4 km/s) lower crustal (HVLC) layer that is thicker than 10 km under the slope base and pinches out seawards. The HVLC layer is interpreted as magmatic underplating emplaced during continental rifting in response to high upper mantle temperature. The acoustic basement of the slope base shows an igneous stratigraphy developed by massive volcanic eruption. These features suggest that the evolution of the Korean margin can be explained by the processes occurring at volcanic rifted margins. Global earthquake tomography supports our interpretation by defining the abnormally hot upper mantle across the Korean margin and in the Ulleung Basin.     

中国边缘海域及其邻区的岩石层结构与构造分析

利用中国边缘海域近年的地震层析成像结果,根据速度异常和各向异性分析东海、黄海和南海北部的岩石层结构和构造,讨论中朝块体和扬子块体在黄海内部的拼合边界(黄海东部断裂带)、东海陆架盆地上地幔异常与岩石层形成演化、南海北部地壳底部高速层的成因及地幔活动等问题。分析表明,黄海东部与朝鲜半岛之间存在一个深部构造界限(大致对应于黄海东部断裂带),分界两侧Pn波速度各向异性存在明显差异,反映不同构造应力和断裂剪切运动作用下的岩石层地幔变形特征。东海陆架下方的低速异常揭示了张裂盆地形成时期的地幔活动痕迹,表明中、新生代期间发生过地幔上涌并造成岩石层减薄,菲律宾海板块向西俯冲引发的地幔活动对东海陆架岩石层的形成、演化产生明显的影响。南海北部岩石层厚度较大并且温度相对偏低,地幔异常仅限于局部地区,估计南海北部大陆边缘的地壳底部高速层形成于张裂发生之前,或者是地壳形成时期壳幔分异时的产物。南海中央海盆的扩张不仅导致地壳拉张,软流层物质上涌,而且也造成岩石层地幔减薄甚至缺失。     

P-wave velocity structure of the margin of the southeastern Tsushima Basin in the Japan Sea using ocean bottom seismometers and airguns

The Tsushima Basin is located in the southwestern Japan Sea, which is a back-arc basin in the northwestern Pacific. Although some geophysical surveys had been conducted to investigate the formation process of the Tsushima Basin, it remains unclear. In 2000, to clarify the formation process of the Tsushima Basin, the seismic velocity structure survey with ocean bottom seismometers and airguns was carried out at the southeastern Tsushima Basin and its margin, which are presumed to be the transition zone of the crustal structure of the southwestern Japan Island Arc. The crustal thickness under the southeastern Tsushima Basin is about 17 km including a 5 km thick sedimentary layer, and 20 km including a 1.5 km thick sedimentary layer under its margin. The whole crustal thickness and thickness of the upper part of the crust increase towards the southwestern Japan Island Arc. On the other hand, thickness of the lower part of the crust seems more uniform than that of the upper part. The crust in the southeastern Tsushima Basin has about 6 km/s layer with the large velocity gradient. Shallow structures of the continental bank show that the accumulation of the sediments started from lower Miocene in the southeastern Tsushima Basin. The crustal structure in southeastern Tsushima Basin is not the oceanic crust, which is formed ocean floor spreading or affected by mantle plume, but the rifted/extended island arc crust because magnitudes of the whole crustal and the upper part of the crustal thickening are larger than that of the lower part of the crustal thickening towards the southwestern Japan Island Arc. In the margin of the southeastern Tsushima Basin, high velocity material does not exist in the lowermost crust. For that reason, the margin is inferred to be a non-volcanic rifted margin. The asymmetric structure in the both margins of the southeastern and Korean Peninsula of the Tsushima Basin indicates that the formation process of the Tsushima Basin may be simple shear style rather than pure shear style.     

滇西新构造运动时期陆内伸展作用

上新世一第四纪为滇西的新构造运动时期,代表了本区喜马拉雅造山期后的伸展作用时间,除形成区域性的角度不整合外,还形成了一系列小规模的转换拉张盆地,并产生大规模玄武岩浆喷发。洱源—遮放地震深度-速度剖面的P波速度,显示本区岩石圈具4层结构,即上部壳层、韧性壳层、下部固态壳层和地幔岩石圈。各层对比表明,地幔隆起导致热隆伸展作用及热流上涌,并在壳幔界面产生局部混熔,下部壳层发生区域深变质作用;韧性壳层产生强烈纯剪流动,上部壳层则以脆性—脆韧性走滑断层及层圈式滑脱被动地调整;地壳均衡作用不断地调整地幔隆起与地壳厚度的关系。     

中国东部新生代玄武岩记录古太平洋俯冲带壳幔相互作用

大陆玄武岩通常具有与洋岛玄武岩相似的地球化学成分,其中含有显著的壳源组分.对于洋岛玄武岩来说,虽然其中的壳源组分归咎于深俯冲大洋板片的再循环,但是对板片俯冲过程中的壳幔相互作用缺乏研究.对于大陆玄武岩来说,由于其形成与特定大洋板片在大陆边缘之下的俯冲有关,可以用来确定古大洋板片俯冲的地壳物质再循环.本文总结了我们对中国东部新生代玄武岩所进行的一系列地球化学研究,结果记录了古太平洋板片俯冲析出流体对地幔楔的化学交代作用.这些大陆玄武岩普遍具有与洋岛玄武岩类似的地球化学成分,在微量元素组成上表现为富集LILE和LREE、亏损HREE,但是不亏损HFSE的分布特点,在放射成因同位素组成上表现为亏损至弱富集的Sr-Nd同位素组成.在排除地壳混染效应之后,这些玄武岩的地球化学特征可以由其地幔源区中壳源组分的性质来解释.俯冲大洋地壳部分熔融产生的熔体提供了地幔源区中的壳源组分,其中包括洋壳镁铁质火成岩、海底沉积物和大陆下地壳三种组分.华北和华南新生代大陆玄武岩在Pb同位素组成上存在显著差异,反映它们地幔源区中的壳源组分有所区别.中国东部新生代玄武岩的地幔源区是古太平洋板片于中生代俯冲至亚欧大陆东部之下时,在>200 km的俯冲带深度发生壳幔相互作用的产物.在新生代期间,随着俯冲太平洋板片的回卷引起的中国东部大陆岩石圈拉张和软流圈地幔上涌,那些交代成因的地幔源区发生部分熔融,形成了现今所见的新生代玄武岩.