3D P‐wave traveltime computation in transversely isotropic media using layer‐by‐layer wavefront marching

Subsurface rocks (e.g. shale) may induce seismic anisotropy, such as transverse isotropy. Traveltime computation is an essential component of depth imaging and tomography in transversely isotropic media. It is natural to compute the traveltime using the wavefront marching method. However, tracking the 3D wavefront is expensive, especially in anisotropic media. Besides, the wavefront marching method usually computes the traveltime using the eikonal equation. However, the anisotropic eikonal equation is highly non‐linear and it is challenging to solve. To address these issues, we present a layer‐by‐layer wavefront marching method to compute the P‐wave traveltime in 3D transversely isotropic media. To simplify the wavefront tracking, it uses the traveltime of the previous depth as the boundary condition to compute that of the next depth based on the wavefront marching. A strategy of traveltime computation is designed to guarantee the causality of wave propagation. To avoid solving the non‐linear eikonal equation, it updates traveltime along the expanding wavefront by Fermat's principle. To compute the traveltime using Fermat's principle, an approximate group velocity with high accuracy in transversely isotropic media is adopted to describe the ray propagation. Numerical examples on 3D vertical transverse isotropy and tilted transverse isotropy models show that the proposed method computes the traveltime with high accuracy. It can find applications in modelling and depth migration.     

A multi‐azimuth seismic refraction study for a horizontal transverse isotropic medium: physical modelling results

To investigate the characteristics of the anisotropic stratum, a multi‐azimuth seismic refraction technique is proposed in this study since the travel time anomaly of the refraction wave induced by this anisotropic stratum will be large for a far offset receiver. To simplify the problem, a two‐layer (isotropy–horizontal transverse isotropy) model is considered. A new travel time equation of the refracted P‐wave propagation in this two‐layer model is derived, which is the function of the phase and group velocities of the horizontal transverse isotropic stratum. In addition, the measured refraction wave velocity in the physical model experiment is the group velocity. The isotropic intercept time equation of a refraction wave can be directly used to estimate the thickness of the top (isotropic) layer of the two‐layer model because the contrast between the phase and group velocities of the horizontal transverse isotropic medium is seldom greater than 10% in the Earth. If the contrast between the phase and group velocities of an anisotropic medium is small, the approximated travel time equation of a refraction wave is obtained. This equation is only dependent on the group velocity of the horizontal transverse isotropic stratum. The elastic constants A₁₁, A₁₃, and A₃₃ and the Thomsen anisotropic parameter ε of the horizontal transverse isotropic stratum can be estimated using this multi‐azimuth seismic refraction technique. Furthermore, under a condition of weak anisotropy, the Thomsen anisotropic parameter δ of the horizontal transverse isotropic stratum can be estimated by this technique as well.     

Migration velocity analysis for tilted transversely isotropic media

Tilted transversely isotropic formations cause serious imaging distortions in active tectonic areas (e.g., fold‐and‐thrust belts) and in subsalt exploration. Here, we introduce a methodology for P‐wave prestack depth imaging in tilted transversely isotropic media that properly accounts for the tilt of the symmetry axis as well as for spatial velocity variations. For purposes of migration velocity analysis, the model is divided into blocks with constant values of the anisotropy parameters ε and δ and linearly varying symmetry‐direction velocity V_P0 controlled by the vertical (k_z) and lateral (k_x) gradients. Since determination of tilt from P‐wave data is generally unstable, the symmetry axis is kept orthogonal to the reflectors in all trial velocity models. It is also assumed that the velocity V_P0 is either known at the top of each block or remains continuous in the vertical direction. The velocity analysis algorithm estimates the velocity gradients k_z and k_x and the anisotropy parameters ε and δ in the layer‐stripping mode using a generalized version of the method introduced by Sarkar and Tsvankin for factorized transverse isotropy with a vertical symmetry axis. Synthetic tests for several models typical in exploration (a syncline, uptilted shale layers near a salt dome and a bending shale layer) confirm that if the symmetry‐axis direction is fixed and V_P0 is known, the parameters k_z, k_x, ε and δ can be resolved from reflection data. It should be emphasized that estimation of ε in tilted transversely isotropic media requires using nonhyperbolic moveout for long offsets reaching at least twice the reflector depth. We also demonstrate that application of processing algorithms designed for a vertical symmetry axis to data from tilted transversely isotropic media may lead to significant misfocusing of reflectors and errors in parameter estimation, even when the tilt is moderate (30°). The ability of our velocity analysis algorithm to separate the anisotropy parameters from the velocity gradients can be also used in lithology discrimination and geologic interpretation of seismic data in complex areas.     

Anisotropic azimuthal surface-wave inversion for a vertically fractured and transverse isotropy medium: Theory and examples from a controlled field experiment

Fractures in elastic media add compliance to a rock in the direction normal to the fracture strike. Therefore, elastic wave velocities in a fractured rock will vary as a function of the energy propagation direction relative to the orientation of the aligned fracture set. Anisotropic Thomson–Haskell matrix Rayleigh-wave equations for a vertically transverse isotropic media can be used to model surface-wave dispersion along the principal axes of a vertically fractured and transversely isotropic medium. Furthermore, a workflow combining first-break analysis and azimuthal anisotropic Rayleigh-wave inversion can be used to estimate P-wave and S-wave velocities, Thomsen's ε, and Thomsen's δ along the principal axes of the orthorhombic symmetry. In this work, linear slip theory is used to map our inversion results to the equivalent vertically fractured and transversely isotropic medium coefficients. We carried out this inversion on a synthetic example and a field example. The synthetic data example results show that joint estimation of S-wave velocities with Thomsen's parameters ε and δ along normal and parallel to the vertical fracture set is reliable and, when mapped to the corresponding vertically fractured and transversely isotropic medium, provides insight into the fracture compliances. When the inversion was carried out on the field data, results indicated that the fractured rock is more compliant in the azimuth normal to the visible fracture set orientation and that the in situ normal fracture compliance to tangential fracture compliance ratio is less than half, which implies some cementation may have occurred along the fractures. Such an observation has significant implications when modelling the transport properties of the rock and its strength. Both synthetic and field examples show the potential of azimuthal anisotropic Rayleigh-wave inversion as the method can be further expanded to a more general case where the vertical fracture set orientation is not known a priori.     

Der Einfluss chinesischer Spaltproduktaerosole auf den in Stuttgart-Hohenheim gemessenen radioaktiven Befall

Zusammenfassung Am 9. Mai wurde der dritte chinesische Kernwaffenversuch durchgeführt. Als Folge konnte etwa vierzehn Tage nach dem Explosionszeitpunkt in Stuttgart-Hohenheim eine deutliche Zunahme des radioaktiven Befalls festgestellt werden. Für die gewonneuen Niederschlags-, Staub- und Luftfilterproben, sowie für ein Heisses Teilchen wurdent ^–(1+x )-Kurven gemessen, diex-Werte bestimmt und gammaspektrometrisch die Nuklidzusammensetzung untersucht. An den aufgefundenen Nukliddiskriminierungen ist bemerkenswert, dass das Heisse Teilchen eine deutliche⁹⁵Zr-⁹⁵ Nb-Anreicherung aufwies.

---

Summary The results of an investigation of the deposition of nuclear weapon debris from the third Chinese test explosion are discussed.t ^–(1+x )-curves were measured and the values of the parameterx are presented. The dry and precipitation fallout samples and a hot particle were gammaspectrometrically examined. Fractionation phenomena were studied.

     

The offset‐midpoint travel‐time pyramid for P‐wave in 2D transversely isotropic media with a tilted symmetry axis

For pre‐stack phase‐shift migration in homogeneous isotropic media, the offset‐midpoint travel time is represented by the double‐square‐root equation. The travel time as a function of offset and midpoint resembles the shape of Cheops’ pyramid. This is also valid for transversely isotropic media with a vertical symmetry axis. In this study, we extend the offset‐midpoint travel‐time pyramid to the case of 2D transversely isotropic media with a tilted symmetry axis. The P‐wave analytical travel‐time pyramid is derived under the assumption of weak anelliptical property of the tilted transverse isotropy media. The travel‐time equation for the dip‐constrained transversely isotropic model is obtained from the depth‐domain travel‐time pyramid. The potential applications of the derived offset‐midpoint travel‐time equation include pre‐stack Kirchhoff migration, anisotropic parameter estimation, and travel‐time calculation in transversely isotropic media with a tilted symmetry axis.     

Modelling of viscoacoustic wave propagation in transversely isotropic media using decoupled fractional Laplacians

A new wave equation is derived for modelling viscoacoustic wave propagation in transversely isotropic media under acoustic transverse isotropy approximation. The formulas expressed by fractional Laplacian operators can well model the constant-Q (i.e. frequency-independent quality factor) attenuation, anisotropic attenuation, decoupled amplitude loss and velocity dispersion behaviours. The proposed viscoacoustic anisotropic equation can keep consistent velocity and attenuation anisotropy effects with that of qP-wave in the constant-Q viscoelastic anisotropic theory. For numerical simulations, the staggered-grid pseudo-spectral method is implemented to solve the velocity–stress formulation of wave equation in the time domain. The constant fractional-order Laplacian approximation method is used to cope with spatial variable-order fractional Laplacians for efficient modelling in heterogeneous velocity and Q media. Simulation results for a homogeneous model show the decoupling of velocity dispersion and amplitude loss effects of the constant-Q equation, and illustrate the influence of anisotropic attenuation on seismic wavefields. The modelling example of a layered model illustrates the accuracy of the constant fractional-order Laplacian approximation method. Finally, the Hess vertical transversely isotropic model is used to validate the applicability of the formulation and algorithm for heterogeneous media.     

Traveltime parameters in a tilted elliptical anisotropic medium‡

In this paper, we derive analytical expressions for one‐way and two‐way kinematical parameters in elliptical tilted transverse isotropy media. We show that the homogeneous elliptical tilted transverse isotropy models result in hyperbolic moveout with a reflection point sideslip x₀, which can be considered as an additional traveltime parameter for one‐way wave propagation. For homogeneous elliptical tilted transverse isotropy models we show that the inversion of one‐way traveltime parameters suffers from the ambiguity for large tilts. It is shown that the accuracy of the inversion is sensitive to the error in x₀. We also derive and invert the traveltime parameters for a vertically heterogeneous elliptical tilted transverse isotropy model with a tilt gradually changing with depth. The a priori knowledge of parameter δ is very important for inversion. The wrong choise of this parameter results in significant errors in inverted model parameters.     

P-wave complex-valued traveltimes in homogeneous attenuating transversely isotropic media

Computation of complex-valued traveltimes provides an efficient approach to describe the seismic wave attenuation for applications like attenuation tomography, inverse Q filtering and Kirchhoff migration with absorption compensation. Attenuating acoustic transverse isotropy can be used to describe the directional variation of velocity and attenuation of P-waves in thin-bedding geological structures. We present an approximate method to solve the acoustic eikonal equation for an attenuating transversely isotropic medium with a vertical symmetry axis. We take into account two similar parameterizations of an attenuating vertical symmetry axis medium. The first parameterization uses the normal moveout velocity, whereas the second parameterization uses the horizontal velocity. For each parameterization, we combine perturbation theory and the Shanks transform in different ways to derive analytic solutions. Numerical examples show that the analytic solutions derived from the second parameterization yield better accuracy. The Shanks transform solution with respect to only the anellipticity parameter from the second parameterization is demonstrated numerically to be the most accurate among all the analytic solutions.     

Moveout analysis for tranversely isotropic media with a tilted symmetry axis

The transversely isotropic (TI) model with a tilted axis of symmetry may be typical, for instance, for sediments near the flanks of salt domes. This work is devoted to an analysis of reflection moveout from horizontal and dipping reflectors in the symmetry plane of TI media that contains the symmetry axis. While for vertical and horizontal transverse isotropy zero-offset reflections exist for the full range of dips up to 90°, this is no longer the case for intermediate axis orientations. For typical homogeneous models with a symmetry axis tilted towards the reflector, wavefront distortions make it impossible to generate specular zero-offset reflected rays from steep interfaces. The ‘missing’ dipping planes can be imaged only in vertically inhomogeneous media by using turning waves. These unusual phenomena may have serious implications in salt imaging. In non-elliptical TI media, the tilt of the symmetry axis may have a drastic influence on normal-moveout (NMO) velocity from horizontal reflectors, as well as on the dependence of NMO velocity on the ray parameter p (the ‘dip-moveout (DMO) signature’). The DMO signature retains the same character as for vertical transverse isotropy only for near-vertical and near-horizontal orientation of the symmetry axis. The behaviour of NMO velocity rapidly changes if the symmetry axis is tilted away from the vertical, with a tilt of ±20° being almost sufficient to eliminate the influence of the anisotropy on the DMO signature. For larger tilt angles and typical positive values of the difference between the anisotropic parameters ε and δ, the NMO velocity increases with p more slowly than in homogeneous isotropic media; a dependence usually caused by a vertical velocity gradient. Dip-moveout processing for a wide range of tilt angles requires application of anisotropic DMO algorithms. The strong influence of the tilt angle on P-wave moveout can be used to constrain the tilt using P-wave NMO velocity in the plane that includes the symmetry axis. However, if the azimuth of the axis is unknown, the inversion for the axis orientation cannot be performed without a 3D analysis of reflection traveltimes on lines with different azimuthal directions.     

Love waves in a sedimentary layer lying over an anisotropic inhomogeneous half space

Summary The effects of anisotropy and inhomogeneity on the propagation of Love waves in a sedimentary layer, overlying the inhomogeneous and transversely isotropic half space, are studied in this paper. The results of numerical analysis show an appreciable variation of phase- and group-velocity of Love waves in low frequency region compared to high frequency region due to the presence of transverse isotropy and inhomogeneity in the half space. The higher values for phase velocity are found for the increasing values of anisotropy factor as well as for the greater power of density variation. However, the presence of higher anisotropy factor and inhomogeneity in the half space reduce group velocity considerably in the lower frequency region.     

横观各向同性层状半空间中的弹性位错

本文在柱向量函数系下,利用传播矩阵法求解了层状横观各向同性半空间由内部点源位锚引起的变形;对六个基本点源位错,以等价体力法推出了横观各向同性情形下的点源函数,并且给出了内部任意剪切位错源引起的地表位移的积分表达式。为研究地球的层状结构,特别是其上部的横观各向同性对地表的地震位移、应变以及倾斜场的影响提供了计算公式。     

APPROXIMATIONS TO SHEAR-WAVE VELOCITY AND MOVEOUT EQUATIONS IN ANISOTROPIC MEDIA1

Backus and Crampin derived analytical equations for estimating approximate phase-velocity variations in symmetry planes in weakly anisotropic media, where the coefficients of the equations are linear combinations of the elastic constants. We examine the application of similar equations to group-velocity variations in off-symmetry planes, where the coefficients of the equations are derived numerically. We estimate the accuracy of these equations over a range of anisotropic materials with transverse isotropy with both vertical and horizontal symmetry axes, and with combinations of transverse isotropy yielding orthorhombic symmetry. These modified equations are good approximations for up to 17% shear-wave anisotropy for propagations in symmetry planes for all waves in all symmetry systems examined, but are valid only for lower shear-wave anisotropy (up to 11%) in off-symmetry planes. We also obtain analytical moveout equations for the reflection of qP-, qSH-, and qSV- waves from a single interface for off-symmetry planes in anisotropic symmetry. The moveout equation consists of two terms: a hyperbolic moveout and a residual moveout, where the residual moveout is proportional to the degree of anisotropy and the spread length of the acquisition geometry. Numerical moveout curves are computed for a range of anisotropic materials to verify the analytical moveout equations.     

Seismic amplitude inversion for the transversely isotropic media with vertical axis of symmetry

Transverse isotropy with a vertical axis of symmetry is a common form of anisotropy in sedimentary basins, and it has a significant influence on the seismic amplitude variation with offset. Although exact solutions and approximations of the PP-wave reflection coefficient for the transversely isotropic media with vertical axis of symmetry have been explicitly studied, it is difficult to apply these equations to amplitude inversion, because more than three parameters need to be estimated, and such an inverse problem is highly ill-posed. In this paper, we propose a seismic amplitude inversion method for the transversely isotropic media with a vertical axis of symmetry based on a modified approximation of the reflection coefficient. This new approximation consists of only three model parameters: attribute A, the impedance (vertical phase velocity multiplied by bulk density); attribute B, shear modulus proportional to an anellipticity parameter (Thomsen's parameter ε−δ); and attribute C, the approximate horizontal P-wave phase velocity, which can be well estimated by using a Bayesian-framework-based inversion method. Using numerical tests we show that the derived approximation has similar accuracy to the existing linear approximation and much higher accuracy than isotropic approximations, especially at large angles of incidence and for strong anisotropy. The new inversion method is validated by using both synthetic data and field seismic data. We show that the inverted attributes are robust for shale-gas reservoir characterization: the shale formation can be discriminated from surrounding formations by using the crossplot of the attributes A and C, and then the gas-bearing shale can be identified through the combination of the attributes A and B. We then propose a rock-physics-based method and a stepwise-inversion-based method to estimate the P-wave anisotropy parameter (Thomsen's parameter ε). The latter is more suitable when subsurface media are strongly heterogeneous. The stepwise inversion produces a stable and accurate Thomsen's parameter ε, which is proved by using both synthetic and field data.     

Weak‐anisotropy approximation for P‐wave reflection coefficient at the boundary between two tilted transversely isotropic media

Existing and commonly used in industry nowadays, closed‐form approximations for a P‐wave reflection coefficient in transversely isotropic media are restricted to cases of a vertical and a horizontal transverse isotropy. However, field observations confirm the widespread presence of rock beds and fracture sets tilted with respect to a reflection boundary. These situations can be described by means of the transverse isotropy with an arbitrary orientation of the symmetry axis, known as tilted transversely isotropic media. In order to study the influence of the anisotropy parameters and the orientation of the symmetry axis on P‐wave reflection amplitudes, a linearised 3D P‐wave reflection coefficient at a planar weak‐contrast interface separating two weakly anisotropic tilted tranversely isotropic half‐spaces is derived. The approximation is a function of the incidence phase angle, the anisotropy parameters, and symmetry axes tilt and azimuth angles in both media above and below the interface. The expression takes the form of the well‐known amplitude‐versus‐offset “Shuey‐type” equation and confirms that the influence of the tilt and the azimuth of the symmetry axis on the P‐wave reflection coefficient even for a weakly anisotropic medium is strong and cannot be neglected. There are no assumptions made on the symmetry‐axis orientation angles in both half‐spaces above and below the interface. The proposed approximation can be used for inversion for the model parameters, including the orientation of the symmetry axes. Obtained amplitude‐versus‐offset attributes converge to well‐known approximations for vertical and horizontal transverse isotropic media derived by Rüger in corresponding limits. Comparison with numerical solution demonstrates good accuracy.     

On propagation of Rayleigh waves in a thin transversely isotropic layer with rigid bottom surface

Summary The complete solution of the propagation of Rayleigh waves in a thin transversely isotropic layer with rigid bottom surface has been developed along with its frequency equation. The ratio of the possible vibrations at the free surface in the horizontal and vertical directions has been worked out and the proposed analysis has been applied to the case of Beryl and Ice Sheets which show definite behaviour of transverse isotropy.     

Vertically fractured transversely isotropic media: dimensionality and deconstruction

A vertically fractured transversely isotropic (VFTI) elastic medium is one in which any number of sets of vertical aligned fractures (each set has its normal lying in the horizontal x₁, x₂‐plane) pervade the medium and the sets of aligned fractures are the only features of the medium disturbing the axi‐symmetry about the x₃‐axis implying that in the absence of fractures, the background medium is transversely isotropic (TI). Under the assumptions of long wavelength equivalent medium theory, the compliance matrix of a fractured medium is the sum of the background medium's compliance matrix and a fracture compliance matrix. For sets of parallel rotationally symmetric fractures (on average), the fracture compliance matrix is dependent on 3 parameters − its normal and tangential compliance and its strike direction. When one fracture set is present, the medium is orthorhombic and the analysis is straightforward. When two (non‐orthogonal) or more sets are present, the overall medium is in general elastically monoclinic; its compliance tensor components are subject to two equalities yielding an 11 parameter monoclinic medium. Constructing a monoclinic VFTI medium with n embedded vertical fracture sets, requires 5 TI parameters plus 3×n fracture set parameters. A deconstruction of such an 11 parameter monoclinic medium involves using its compliance tensor to find a background transversely isotropic medium and several sets of vertical fractures which, in the long wavelength limit, will behave exactly as the original 11 parameter monoclinic medium. A minimal deconstruction, would be to determine, from the 11 independent components, the transversely isotropic background (5 parameters) and two fracture sets (specified by 2 × 3 = 6 parameters). Two of the background TI medium's compliance matrix components are known immediately by inspection, leaving nine monoclinic components to be used in the minimal deconstruction of the VFTI medium. The use of the properties of a TI medium, which are linear relations on its compliance components, allows the deconstruction to be reduced to solving a pair of non‐linear equations on the orientations of two fracture sets. A single root yielding a physically meaningful minimum deconstruction yields a unique minimal representation of the monoclinic medium as a VFTI medium. When no such root exists, deconstruction requires an additional fracture set and uniqueness is lost. The boundary between those monoclinic media that have a unique minimal representation and those that do not is yet to be determined.     

TTI介质的相速度研究

推导了二维TTI介质的相速度表达式,并且依据推导出来的相速度表达式,模拟并分析了二维TTI介质相速度的传播快照以及TI介质相速度的传播快照;对比并分析了TTI介质和TI介质模型的相速度理论计算值的X分量特征的差异。TTI介质的相速度研究具有较高的理论研究价值和实际应用价值．     

Compressional wave events in the dawn plasma sheet observed by Interball-1

Compressional waves with periods greater than 2 min (about 10–30 min) at low geomagnetic latitudes, namely compressional Pc5 waves, are studied. The data set obtained with magnetometer MIF-M and plasma analyzer instrument CORALL on board the Interball-1 are analyzed. Measurements performed in October 1995 and October 1996 in the dawn plasma sheet at −30 R_E ≤ X_GSM and |Z_GSM| ≤ 10 R_E are considered. Anti-phase variations of magnetic field and ion plasma pressures are analyzed by searching for morphological similarities in the two time series. It is found that longitudinal and transverse magnetic field variations with respect to the background magnetic field are of the same order of magnitude. Plasma velocities are processed for each time period of the local dissimilarity in the pressure time series. VeloCity disturbances occur mainly transversely to the local field line. The data reveal the rotation of the veloCity vector. Because of the field line curvature, there is no fixed position of the rotational plane in the space. These vortices are localized in the regions of anti-phase variations of the magnetic field and plasma pressures, and the vortical flows are associated with the compressional Pc5 wave process. A theoretical model is proposed to explain the main features of the nonlinear wave processes. Our main goal is to study coupling of drift Alfven wave and magnetosonic wave in a warm inhomogeneous plasma. A vortex is the partial solution of the set of the equations when the compression is neglected. A compression effect gives rise to a nonlinear soliton-like solution.     

Aligned vertical fractures, HTI reservoir symmetry and Thomsen seismic anisotropy parameters for polar media

Certain crack-influence parameters of Sayers and Kachanov are shown to be directly related to Thomsen's weak-anisotropy seismic parameters for fractured reservoirs when the crack/fracture density is small enough. These results are then applied to the problem of seismic wave propagation in polar reservoirs, i.e., those anisotropic reservoirs having two axes that are equivalent but distinct from the third axis), especially for horizontal transversely isotropic seismic wave symmetry due to the presence of aligned vertical fractures and resulting in azimuthal seismic wave symmetry at the Earth's surface. The approach presented suggests one method of inverting for fracture density from wave speed data. A significant fraction of the technical effort in the paper is devoted to showing how to predict the angular location of the true peak (or trough) of the quasi-SV-wave for polar media and especially how this peak is related to another angle that is very easy to compute. The axis of symmetry is always treated here as the x ₃-axis for either vertical transversely isotropic symmetry (due, for example, to horizontal cracks), or horizontal transversely isotropic symmetry (due to aligned vertical cracks). Then, the meaning of the stiffnesses is derived from the fracture analysis in the same way for vertical transversely isotropic and horizontal transversely isotropic media, but for horizontal transverse isotropy the wave speeds relative to the Earth's surface are shifted by  90^o  in the plane perpendicular to the aligned vertical fractures. Skempton's poroelastic coefficient B is used as a general means of quantifying the effects of fluids inside the fractures. Explicit Biot-Gassmann-consistent formulas for Thomsen's parameters are also obtained for either drained or undrained fractures resulting in either vertical transversely isotropic or horizontal transversely isotropic symmetry of the reservoir.