广东省揭西金坑铜锡铅锌矿区矿床地质特征与远景预测

广东省揭西金坑矿区目前已初步查明的（333＋334）级矿石量为2245464.8吨,其中金属量Cu：17596.7吨、Sn：5945.3吨、Pb：31536.9吨、Zn：58095.2吨。矿区主要矿体为脉状,均受滑动破碎构造带控制,总体上可分为两种类型：一类分布于灰白色花岗闪长斑岩中,在空间分布上受滑动破碎构造带控制,矿体顶底板为片理化带,蚀变强,呈脉状、透镜状产于花岗闪长斑岩体内的片理化带所产生的滑动破碎带中。另一类则产于石英片岩、粉砂岩、炭质泥岩层间滑动破碎构造带中,主要由多个连续的或间断的扁豆状、透镜体状的矿脉组成。矿体赋存严格受岩层控制,矿脉与围岩界线清楚。本文旨在通过对矿体特征、成矿机理的深入分析,为矿区为进一步扩大资源量提供理论上的启示。     

津巴布韦绿岩带中构造型铁矿成矿特征

津巴布韦铁矿层分布普遍,是组成太古界津巴布韦克拉通绿岩带地层常见岩性单元,其岩石特征类似于“硫化物相”含铁建造层,实际上是一种伴有硅化和硫化物矿化的剪切带。过去这种构造成因的铁矿层被认为是一种原始沉积岩层,但从野外露头上可明显辨别出呈交织状分布的片理化带、褶皱变形带、石香肠构造和糜棱岩带;区域上铁矿层与层理或片理相交切,岩层呈交织状分布,同一岩层单元会重复出现。在花岗岩底辟上升作用导致岩石发生变形之前,一系列逆推断层使得原始火山沉积岩单元层产生水平伸展、叠瓦状构造推覆以及岩层重复出现。因此绿岩带地层中这种包含有构造型铁矿层的“馅饼状”岩层模式,愈来愈成为地质工作者研究的焦点。     

SOME APPLICATIONS OF IP-TECHNIQUE FOR DIFFERENT GEOPHYSICAL PROSPECTING PURPOSES *

The usefulness of IP-technique for different geophysical purposes is discussed on the basis of field examples. IP and resistivity results are not always correlated, and the IP-information may be unique in prospecting for very low grade sulphide mineralizations. The IP-technique seems to be useful sometimes in prospecting for disseminated Ni-Cu- mineralizations. A massive sulphide mineralization could be localized using IP. The disturbances from different kinds of geological objects other than prospecting targets generally are smaller in IP-work than in resistivity work. It was possible to discriminate between apparent resistivity anomalies caused by shear zones and by sulphide mineralizations by means of IP-measurements. The influence of magnetite on IP- measurements is briefly discussed. The relation between ground magnetic measurements ΔZ and the IP-parameter is in many areas weak and does not seriously influence the interpretation of the IP-measurements. A high correlation between ΔZ and IP-measurements has been found on a titaniferous iron ore. This ore body gives strong IP-anomalies indicating that it is a good IP-target. Finally, the application of small moving arrays in very detailed IP-measurements is found useful for detailed mapping of a mineralized zone under a thin overburden and for determination of the dip of mineralized zones.     

DISCOVERY OF DIRECT-SHIPPING IRON ORE BY GEOPHYSICAL METHODS IN THE CENTRAL PART OF THE LABRADOR TROUGH*

The deposits of the central sector of the Labrador Trough are magnetite-rich iron ores subjected to enrichment by the process of leaching. In spite of the fact that some ore types are porous and low in density, most of the ore zones have undergone a net increase in density brought about by enrichment. In the course of their formation, the magnetic characteristics of the rocks have changed and a great deal of the magnetite was altered to relatively non-magnetic iron oxides and hydrous iron oxides. Consequently, induced as well as remanent magnetization decreased, but the ratio of the latter with respect to the former increased substantially. All drift-covered areas underlain with iron-formation are potential ore producing areas. From measurements of the first two physical properties and determination of the thickness of overburden by means of a combined gravity-magnetic-seismic or resistivity survey, it is possible to detect and distinguish the iron formations and potential ore zones from the country rocks. In spite of the fact that the iron formations are a complex assemblage of rock types, each having different physical and chemical properties, a qualitative and semi-quantitative correlation between the results of the surveys and the geology as well as the structure of the area could be established. Consequently, in order to increase the chances of success, first a mathematical correlation of the amplitude of the gravity anomalies with the specific gravity, the iron content, the silica content, the porosity factors and the dimensions of the underlying orebodies, and secondly, a quantitative correlation of the ground magnetic intensity relative to the reference lithologie unit with the percentage of Fe₃ O₄ recovery and the volume magnetic susceptibility were done for many deposits. A few discoveries were made with this method. Finally, a fully quantitative interpretation of the geophysical data using a multimodeling analysis led to the discovery of additional direct-shipping iron ore deposits in the Schefferville mining district of Canada.     

西藏日土县材玛铁矿地质特征及找矿方向

通过对西藏日土县材玛铁矿床的调查研究表明,南羌塘拗陷带的材玛铁矿床成矿地质条件较好.经地表槽探揭露和深部钻探工程控制,发现其矿体为似层状;矿体品位和厚度沿走向和倾向变化较小;容矿岩石主要为矽卡岩、矽卡岩化灰岩;矿石类型简单,主要为磁铁矿矿石.矿化富集与侵入于上三叠统地层的燕山晚期花岗闪长岩、二长花岗岩、花岗斑岩密切相关;矿体产出部位严格受碳酸盐岩层位及其层间破碎带的控制,属接触交代型矿床.其形成与燕山晚期岩浆活动关系密切,空间分布严格受岩浆岩和断裂的控制.花岗岩类岩体与上三叠统地层的接触带和层间破碎带是寻找铁矿的有利部位,外围地区具有寻找相同类型铁矿床的远景.     

江西省万载县野猫冲铜矿控矿构造特征及找矿意义

江西省万载县野猫冲铜矿床为中低温热液（成矿流体）沿构造破碎带蚀变-蚀变岩型铜矿床。在地表地质调查、钻孔岩芯考察及岩矿鉴定的基础上,对野猫冲铜矿控矿构造进行详细研究,表明北东东向大型叠瓦状推（滑）覆构造控制矿区内各地质单元的延深与展布,北东向韧性剪切变形带控制矿区铜金矿体的展布,矿体呈似层状赋存于韧性剪切断裂之间的次级层间破碎带和小断裂带内,带内发育较强的动热变质,硅化、绢云母化和绿泥石化发育。矿石以黄铜矿为主,贫硫,成矿流体具有多期次的活动、叠加改造的特点。上栗-潭埠-宜丰断裂带自西至东已发现20余处铜多金属矿床（点）,显示该带具有巨大找矿潜力。     

Origin of gray-green sandstone in ore bed of sandstone type uranium deposit in north Ordos Basin

Dongsheng sandstone-type uranium deposit is located in the northern part of Ordos Basin, occurring in the transitional zones between gray-green and gray sandstones of Jurassic Zhiluo Formation. Sandstones in oxidized zone of the ore bed look gray-green, being of unique signature and different from one of ordinary inter-layered oxidation zone of sandstone-type uranium deposits. The character and origin of gray-green sandstones are systematically studied through their petrology, mineralogy and geochemistry. It is pointed out that this color of sandstones is originated from secondary oil-gas reduction processes after paleo-oxidation, being due to acicular-leaf chlorite covering surfaces of the sandstone grains. To find out the origin of gray-green sandstone and recognize paleo-oxidation zones in the ore bed are of not only theoretical significance for understanding metallogenesis of this kind of sandstone-type uranium deposit, but also very importantly practical significance for prospecting for similar kind of sandstone-type uranium deposit.     

Origin of gray-green sandstone in ore bed of sandstone type uranium deposit in north Ordos Basin

Dongsheng sandstone-type uranium deposit is located in the northern part of Ordos Basin, occurring in the transitional zones between gray-green and gray sandstones of Jurassic Zhiluo Formation. Sandstones in oxidized zone of the ore bed look gray-green, being of unique signature and different from one of ordinary inter-layered oxidation zone of sandstone-type uranium deposits. The character and origin of gray-green sandstones are systematically studied through their petrology, mineralogy and geochemistry. It is pointed out that this color of sandstones is originated from secondary oil-gas reduction processes after paleo-oxidation, being due to acicular-leaf chlorite covering surfaces of the sandstone grains. To find out the origin of gray-green sandstone and recognize paleo-oxidation zones in the ore bed are of not only theoretical significance for understanding metallogenesis of this kind of sandstone-type uranium deposit, but also very importantly practical significance for prospecting for similar kind of sandstone-type uranium deposit.     

天景山断裂带前锋区第四纪构造变形及成因分析

通过野外详细填图,发现天景山断裂带走滑运动的前端,存在庙山和红尖山两排笼四纪逆冲断裂、褶皱构造带。     

高分辨V6系统在矿山顶板涌水隐患中的应用研究

V6系统是Canada Phoenix Geophysics Limited 2000年推出的最新产品,是目前可控源音频大地电磁测深(CSAMT)方法中功能最为强大的仪器之一.2001年3月利用V6仪器对某铁矿(440 × 300)m2的矿区进行了面积性CSAMT勘测.矿体上盘灰岩中的溶洞、断层、含水破碎带以及可能的与含水层的联系在成果图上反映的非常清晰,为矿山进行水隐患治理提供了一份明确的资料.     

广西地震活动与我国主要地震区(带)地震活动的相关分析

应用灰色系统理论的关联分析方法研究了广西地震活动与我国主要地震区（带）地震活动的相关性．结果表明广西地震活动与东南沿海地震带地震活动的关联程度最大（ｒ＝０．８６）,根据这一结果,对广西与东南沿海地震带的地震活动的相关性作了进一步探讨,发现本世纪以来广西地震活动与东南沿海地震带的地震活动同步起伏,两区（带）之间发生中强地震的互相对应关系特别明显．     

Experimental estimation of velocities and anisotropy of a series of Swedish crystalline rocks and ores

To provide a guide for future deep (<1.5 km) seismic mineral exploration and to better understand the nature of reflections imaged by surface reflection seismic data in two mining camps and a carbonatite complex of Sweden, more than 50 rock and ore samples were collected and measured for their seismic velocities. The samples are geographically from the northern and central parts of Sweden, ranging from metallic ore deposits, meta‐volcanic and meta‐intrusive rocks to deformed and metamorphosed rocks. First, ultrasonic measurements of P‐ and S‐wave velocities at both atmospheric and elevated pressures, using 0.5 MHz P‐ and S‐wave transducers were conducted. The ultrasonic measurements suggest that most of the measured velocities show positive correlation with the density of the samples with an exception of a massive sulphide ore sample that shows significant low P‐ and S‐wave velocities. The low P‐ and S‐wave velocities are attributed to the mineral texture of the sample and partly lower pyrite content in comparison with a similar type sample obtained from Norway, which shows significantly higher P‐ and S‐wave velocities. Later, an iron ore sample from the central part of Sweden was measured using a low‐frequency (0.1–50 Hz) apparatus to provide comparison with the ultrasonic velocity measurements. The low‐frequency measurements indicate that the iron ore sample has minimal dispersion and attenuation. The iron ore sample shows the highest acoustic impedance among our samples suggesting that these deposits are favourable targets for seismic methods. This is further demonstrated by a real seismic section acquired over an iron ore mine in the central part of Sweden. Finally, a laser‐interferometer device was used to analyse elastic anisotropy of five rock samples taken from a major deformation zone in order to provide insights into the nature of reflections observed from the deformation zone. Up to 10% velocity‐anisotropy is estimated and demonstrated to be present for the samples taken from the deformation zone using the laser‐interferometery measurements. However, the origin of the reflections from the major deformation zone is attributed to a combination of anisotropy and amphibolite lenses within the deformation zone.     

大别山东段双变质带特征和古构造演化

本文采用变质作用和叠加变质作用分析方法在大别山东段建立了高压低温变质带和与之对应的高温低压变质带。高压低温变质带和高温低压变质带具有典型的古地热梯度、标型矿物及其组合;后者还广泛发育混合岩化和花岗岩化,在大别山中部地区构成一条典型的热轴。双变质带是北淮阳深蚀的地缝合带重要组成部分,是划分古板块边界重要依据之一。它的发现进一步明确了该区古构造环境和演化     

地震活动性层次结构分析及危险区预测方法

对地震活动性进行层次结构分析可划分出不同的地震区带,中国大陆的地震活动可分为9个地震区带,分析各个区带的地震活动性可作出某一活跃期强震发生主体地区的判别,对某一个地震区带的地震活动进行层次结构分析可作出地震危险区预测。用震源面投影图代替点投影的震中分布图可更合理地解释一个构造带上强震的发生过程,更清楚地勾画出未来强震的孕震范围。对强震破裂区闭锁段、背景空区、孕震空区的关系用实测震例进行了解释。     

金矿勘查中的地面高精度磁法测量——以黑龙江乌拉嘎金矿外围十三公里勘查区为例

地面高精度磁测是可以间接找金的.它能够可靠地反映控矿地质体的磁性变化,了解隐伏的控矿岩体、构造和含矿蚀变破碎带的分布.为了提高黑龙江乌拉嘎金矿外围十三公里区的金矿勘查效果,利用地面高精度磁测在该区进行了扫面测量.通过该项研究表明了含矿构造破碎带的存在.在矿化带上方表现为正值磁测异常区与负值磁测异常区的接触带,尤其是梯度较大部位.矿体一般位于负值一侧的低缓正异常处.通过对优选靶区的工程查证,探槽、浅井双双见矿,共获得黄金资源量1.5吨.由此证明了应用该方法找金的有效性.     

海南岛及其邻区地震活动特征分析

将海南岛及其邻近地区划分为３地震活动区和４个地震活动条带，系统地研究了各区、带地震活动的时间序列特征及空间分布特点，为海南地震时、空、强三要素预报提供参考依据。     

Geometry of the Nojima Fault at Nojima-Hirabayashi, Japan – II. Microstructures and their Implications for Permeability and Strength

Samples of damage-zone granodiorite and fault core from two drillholes into the active, strike-slip Nojima fault zone display microstructures and alteration features that explain their measured present-day strengths and permeabilities and provide insight on the evolution of these properties in the fault zone. The least deformed damage-zone rocks contain two sets of nearly perpendicular (60–90° angles), roughly vertical fractures that are concentrated in quartz-rich areas, with one set typically dominating over the other. With increasing intensity of deformation, which corresponds generally to increasing proximity to the core, zones of heavily fragmented rock, termed microbreccia zones, develop between prominent fractures of both sets. Granodiorite adjoining intersecting microbreccia zones in the active fault strands has been repeatedly fractured and locally brecciated, accompanied by the generation of millimeter-scale voids that are partly filled with secondary minerals. Minor shear bands overprint some of the heavily deformed areas, and small-scale shear zones form from the pairing of closely spaced shear bands. Strength and permeability measurements were made on core collected from the fault within a year after a major (Kobe) earthquake. Measured strengths of the samples decrease regularly with increasing fracturing and fragmentation, such that the gouge of the fault core and completely brecciated samples from the damage zone are the weakest. Permeability increases with increasing disruption, generally reaching a peak in heavily fractured but still more or less cohesive rock at the scale of the laboratory samples. Complete loss of cohesion, as in the gouge or the interiors of large microbreccia zones, is accompanied by a reduction of permeability by 1-2 orders of magnitude below the peak values. The core samples show abundant evidence of hydrothermal alteration and mineral precipitation. Permeability is thus expected to decrease and strength to increase somewhat in active fault strands between earthquakes, as mineral deposits progressively seal fractures and fill pore spaces.     

高分辨率航磁方法及在大冶铁矿区的应用

本文针对危机矿山深部及周边找矿的难度大、勘探周期短的特点,提出了一套以找矿为目的,集直升机大比例尺航空物探测量、数据处理、解释为一体的高分辨率航磁方法技术.这些方法包括硬架式直升机航磁测量方法、曲面位场处理方法、精细反演解释方法等.应用该方法在湖北黄石大冶铁矿中布钻,已有两孔见富磁铁矿及伴生的铜、金矿,见矿最大厚度为14.6m.因此,高分辨率航磁方法在危机矿山进一步挖潜工作中可以实现快速找矿目的.     

Development of faults as zones of deformation bands and as slip surfaces in sandstone

Three forms of fault are recognized in Entrada and Navajo Sandstones in the San Rafael Desert, southeastern Utah; deformation bands, zones of deformation bands, and slip surfaces. Small faults occur asdeformation bands, about one millimeter thick, in which pores collapse and sand grains fracture, and along which there are shear displacements on the order of a few millimeters or centimeters. Two or more deformation bands adjacent to each other, which share the same average strike and dip, form azone of deformation bands. A zone becomes thicker by addition of new bands, side by side. Displacement across a zone is the sum of displacements on each individual band. The thickest zones are about 0.5 m and total displacement across a thick zone rarely exceeds 30 cm. Finally,slip surfaces, which are through-going surfaces of discontinuity in displacement, form at either edge of zones of highly concentrated deformation bands. In contrast with individual deformation bands and zones of deformation bands, slip surfaces accommodate large displacements, on the order of several meters in the San Rafael Desert.The sequence of development is from individual deformation bands, to zones, to slip surfaces, and each type of faulting apparently is controlled by somewhat different processes. The formation of zones apparently involves strain hardening, whereas the formation of slip surfaces probably involves strain softening of crushed sandstone.     

Estimation of Seismic Hazard Parameters for the Himalayas and its Vicinity from Complete Data Files

—The maximum likelihood estimation of earthquake hazard parameters has been made in the Himalayas and its surrounding areas on the basis of a procedure which utilizes data containing complete files of the most recent earthquakes. The entire earthquake catalogue used covers the period from 1900–1990. The maximum regional magnitude M _max?, the activity rate of the seismic event λ, the mean return period R of earthquakes with a certain lower magnitude M _max≥ m along with their probability of occurrence, as well as the parameter b of of Gutenberg Richter magnitude-frequency relationship, have been determined for six different seismic zones of the Himalayas and its vicinity. It is shown that in general the hazard is higher in the zone NEI and BAN than the other four zones. The high difference of the b parameter and the hazard level from zone to zone reflect the high seismotectonic complexity and crustal heterogeneity.