Comparison of Recharge Estimation Methods During a Wet Period in a Karst Aquifer

Management of water resources, implying their appropriate protection, calls for a sound evaluation of recharge. Such assessment is very complex in karst aquifers. Most methods are developed for application to detrital aquifers, without taking into account the extraordinary heterogeneity of porosity and permeability of karst systems. It is commonly recommended to estimate recharge using multiple methods; however, differences inherent to the diverse methods make it difficult to clarify the accuracy of each result. In this study, recharge was estimated in a karst aquifer working in a natural regime, in a Mediterranean‐type climate, in the western part of the Sierra de las Nieves (southern Spain). Mediterranean climate regions are characterized by high inter‐annual rainfall variability featuring long dry periods and short intense wet periods, the latter constituting the most important contribution to aquifer water input. This paper aims to identify the methods that provide the most plausible range of recharge rate during wet periods. Six methods were tested: the classical method of Thornthwaite‐Mather, the Visual Balan code, the chloride balance method, and spatially distributed methods such as APLIS, a novel spatiotemporal estimation of recharge, and ZOODRM. The results help determine valid methods for application in the rest of the unit of study and in similar karst aquifers.     

Groundwater Quality: Analysis of Its Temporal and Spatial Variability in a Karst Aquifer

This study develops an approach based on hierarchical cluster analysis for investigating the spatial and temporal variation of water quality governing processes. The water quality data used in this study were collected in the karst aquifer of Yucatan, Mexico, the only source of drinking water for a population of nearly two million people. Hierarchical cluster analysis was applied to the quality data of all the sampling periods lumped together. This was motivated by the observation that, if water quality does not vary significantly in time, two samples from the same sampling site will belong to the same cluster. The resulting distribution maps of clusters and box‐plots of the major chemical components reveal the spatial and temporal variability of groundwater quality. Principal component analysis was used to verify the results of cluster analysis and to derive the variables that explained most of the variation of the groundwater quality data. Results of this work increase the knowledge about how precipitation and human contamination impact groundwater quality in Yucatan. Spatial variability of groundwater quality in the study area is caused by: a) seawater intrusion and groundwater rich in sulfates at the west and in the coast, b) water rock interactions and the average annual precipitation at the middle and east zones respectively, and c) human contamination present in two localized zones. Changes in the amount and distribution of precipitation cause temporal variation by diluting groundwater in the aquifer. This approach allows to analyze the variation of groundwater quality controlling processes efficiently and simultaneously.     

Evaluation of Noble Gas Recharge Temperatures in a Shallow Unconfined Aquifer

Water table temperatures inferred from dissolved noble gas concentrations (noble gas temperatures, NGT) are useful as a quantitative proxy for air temperature change since the last glacial maximum. Despite their importance in paleoclimate research, few studies have investigated the relationship between NGT and actual recharge temperatures in field settings. This study presents dissolved noble gas data from a shallow unconfined aquifer heavily impacted by agriculture. Considering samples unaffected by degassing, NGT calculated from common physically based interpretive gas dissolution models that correct measured noble gas concentrations for "excess air" agreed with measured water table temperatures (WTT). The ability to fit data to multiple interpretive models indicates that model goodness-of-fit does not necessarily mean that the model reflects actual gas dissolution processes. Although NGT are useful in that they reflect WTT, caution is recommended when using these interpretive models. There was no measurable difference in excess air characteristics (amount and degree of fractionation) between two recharge regimes studied (higher flux recharge primarily during spring and summer vs. continuous, low flux recharge). Approximately 20% of samples had dissolved gas concentrations below equilibrium concentration with respect to atmospheric pressure, indicating degassing. Geochemical and dissolved gas data indicate that saturated zone denitrification caused degassing by gas stripping. Modeling indicates that minor degassing (<10% ΔNe) may cause underestimation of ground water recharge temperature by up to 2°C. Such errors are problematic because degassing may not be apparent and degassed samples may be fit by a model with a high degree of certainty.     

Assessment of Managed Aquifer Recharge Site Suitability Using a GIS and Modeling

We completed a two‐step regional analysis of a coastal groundwater basin to (1) assess regional suitability for managed aquifer recharge (MAR), and (2) quantify the relative impact of MAR activities on groundwater levels and sea water intrusion. The first step comprised an analysis of surface and subsurface hydrologic properties and conditions, using a geographic information system (GIS). Surface and subsurface data coverages were compiled, georeferenced, reclassified, and integrated (including novel approaches for combining related datasets) to derive a spatial distribution of MAR suitability values. In the second step, results from the GIS analysis were used with a regional groundwater model to assess the hydrologic impact of potential MAR placement and operating scenarios. For the region evaluated in this study, the Pajaro Valley Groundwater Basin, California, GIS results suggest that about 7% (15 km²) of the basin may be highly suitable for MAR. Modeling suggests that simulated MAR projects placed near the coast help to reduce sea water intrusion more rapidly, but these projects also result in increased groundwater flows to the ocean. In contrast, projects placed farther inland result in more long‐term reduction in sea water intrusion and less groundwater flowing to the ocean. This work shows how combined GIS analysis and modeling can assist with regional water supply planning, including evaluation of options for enhancing groundwater resources.     

Influences of Aquifer Properties on Flow Dimensions in Dolomites

The paper focuses on analyses and correlations of flow dimensions in different dolomite aquifers in Slovenia. Flow dimensions are obtained through the reinterpretation of 72 pumping tests with the generalized radial flow model, based on the fractional flow dimension. The average value of flow dimensions is 2.16 for all dolomites. A study of flow dimensions in individual aquifers categorized according to their lithological properties shows that higher dimensions occur in massive late-diagenetic Cordevolian and Anisian dolomites compared with bedded Main, Bača, and especially Lower Triassic dolomites, which contain a greater proportion of noncarbonate minerals. Partially penetrating wells have higher flow dimensions than fully penetrating wells. Flow dimensions are poorly correlated with hydraulic conductivities of fractures. When comparing the quantities of major dissolved minerals, obtained by hydrogeochemical inverse modeling, with the values of flow dimensions, the Cordevolian and Anisian dolomites are found to exhibit the highest values of both dissolved dolomite and flow dimensions, indicating that greater dissolution occurs at higher flow dimensions. For other aquifers, data points are more scattered and the correlation is mostly poor. When compared with three-dimensional fractal dimensions of fracture networks, there is no correlation with flow dimensions. However, almost all the values of flow dimensions are lower than the corresponding fractal dimensions in dolomites (average D = 2.77), possibly indicating the channeling of flow within the available space of the fracture networks, consequently reducing the flow dimensions.     

Percolation and Particle Transport in the Unsaturated Zone of a Karst Aquifer

Recharge and contamination of karst aquifers often occur via the unsaturated zone, but the functioning of this zone has not yet been fully understood. Therefore, irrigation and tracer experiments, along with monitoring of rainfall events, were used to examine water percolation and the transport of solutes, particles, and fecal bacteria between the land surface and a water outlet into a shallow cave. Monitored parameters included discharge, electrical conductivity, temperature, organic carbon, turbidity, particle-size distribution (PSD), fecal indicator bacteria, chloride, bromide, and uranine. Percolation following rainfall or irrigation can be subdivided into a lag phase (no response at the outlet), a piston-flow phase (release of epikarst storage water by pressure transfer), and a mixed-flow phase (increasing contribution of freshly infiltrated water), starting between 20 min and a few hours after the start of recharge event. Concerning particle and bacteria transport, results demonstrate that (1) a first turbidity signal occurs during increasing discharge due to remobilization of particles from fractures (pulse-through turbidity); (2) a second turbidity signal is caused by direct particle transfer from the soil (flow-through turbidity), often accompanied by high levels of fecal indicator bacteria, up to 17,000 Escherichia coli /100 mL; and (3) PSD allows differentiation between the two types of turbidity. A relative increase of fine particles (0.9 to 1.5 μm) coincides with microbial contamination. These findings help quantify water storage and percolation in the epikarst and better understand contaminant transport and attenuation. The use of PSD as "early-warning parameter" for microbial contamination in karst water is confirmed.     

Heat Tracing in a Fractured Aquifer with Injection of Hot and Cold Water

Heat as a tracer in fractured porous aquifers is more sensitive to fracture-matrix processes than a solute tracer. Temperature evolution as a function of time can be used to differentiate fracture and matrix characteristics. Experimental hot (50 °C) and cold (10 °C) water injections were performed in a weathered and fractured granite aquifer where the natural background temperature is 30 °C. The tailing of the hot and cold breakthrough curves, observed under different hydraulic conditions, was characterized in a log–log plot of time vs. normalized temperature difference, also converted to a residence time distribution (normalized). Dimensionless tail slopes close to 1.5 were observed for hot and cold breakthrough curves, compared to solute tracer tests showing slopes between 2 and 3. This stronger thermal diffusive behavior is explained by heat conduction. Using a process-based numerical model, the impact of heat conduction toward and from the porous rock matrix on groundwater heat transport was explored. Fracture aperture was adjusted depending on the actual hydraulic conditions. Water density and viscosity were considered temperature dependent. The model simulated the increase or reduction of the energy level in the fracture-matrix system and satisfactorily reproduced breakthrough curves tail slopes. This study shows the feasibility and utility of cold water tracer tests in hot fractured aquifers to boost and characterize the thermal matrix diffusion from the matrix toward the flowing groundwater in the fractures. This can be used as complementary information to solute tracer tests that are largely influenced by strong advection in the fractures.     

Quantifying Modern Recharge and Depletion Rates of the Nubian Aquifer in Egypt

Egypt is currently seeking additional freshwater resources to support national reclamation projects based mainly on the Nubian aquifer groundwater resources. In this study, temporal (April 2002 to June 2016) Gravity Recovery and Climate Experiment (GRACE)-derived terrestrial water storage (TWS_GRACE) along with other relevant datasets was used to monitor and quantify modern recharge and depletion rates of the Nubian aquifer in Egypt (NAE) and investigate the interaction of the NAE with artificial lakes. Results indicate: (1) the NAE is receiving a total recharge of 20.27 ± 1.95 km³ during 4/2002?2/2006 and 4/2008–6/2016 periods, (2) recharge events occur only under excessive precipitation conditions over the Nubian recharge domains and/or under a significant rise in Lake Nasser levels, (3) the NAE is witnessing a groundwater depletion of ? 13.45 ± 0.82 km³/year during 3/2006–3/2008 period, (4) the observed groundwater depletion is largely related to exceptional drought conditions and/or normal baseflow recession, and (5) a conjunctive surface water and groundwater management plan needs to be adapted to develop sustainable water resources management in the NAE. Findings demonstrate the use of global monthly TWS_GRACE solutions as a practical, informative, and cost-effective approach for monitoring aquifer systems across the globe.