PRESENT SITUATION AND FUTURE DEVELOPMENT OF MAP REPRODUCTION IN CHINA

Map reproductin and printing has a close relation with electronics, physics, machinebuilding, chemistry and computer sciences. It develops as these sciences grow and forms up its theoretical and technological systems during its own progress. The development of remote sensing cartography and thematic cartogrphy, and the apparent increase of map varieties and colorful presentation forms call those engaged in map reproduction and printing not only to produce ordinary topographic maps and atlases but also to print various continuous tone images. The expanded study area of the profession has made a much higher requirement of the map printers.     

Change detection from aerial images acquired in different durations

Because of quick development of cities, the update of urban GIS data is very important. Change detection is the base of automatic or semi-automatic data update. One way of change detections in urban area is based on old and new aerial images acquired in different durations. The corresponding theory and experiments are introduced and analyzed in this paper. The main procedure includes four stages. The new and old images have to be registered firstly. Then image matching, based on the maximum correlation coefficient, is performed between registered images after the low contrast areas have been removed. The regions with low matching quality are extracted as candidate changed areas. Thirdly, the Gaussian-Laplacian operator is used to detect edges in candidate changed areas on both the registered images, and the straight lines are detected by Hough transformation. Finally, the changed houses and roads can be detected on the basis of straight line matching in candidate changed areas between registered images.     

A shoreline change analysis along the coast between Kanyakumari and Tuticorin,India, using digital shoreline analysis system

The shoreline is one of the rapidly changing landforms in coastal areas.They are the key element in coastal GIS and provide the most information on coastal land form dynamics.Therefore,accurate detection and frequent monitoring of shorelines is very essential to understand the coastal processes and dynamics of various coastal features.The present study is to investigate the shoreline changes along the coast between Kanyakumari and Tuticorin of south India(where hydrodynamic and morphologic changes occur continuously after the December 2004 tsunami)by using Digital Shoreline Analysis System(DSAS),an extension of ArcGIS.Multidate IRS and Landsat Satellite data(1999,2001,2003,2005,2007,and 2009)are used to extract the shorelines.The data is processed by using the ERDAS IMAGINE 9.1 software and analyzed by ArcGIS 9.2 workstation.The rates of shoreline changes are estimated by three statistical methods,namely,End Point Rate(EPR),Linear Regression Rate(LRR),and Least Me-dian of Squares(LMS)by using DSAS.The study reveals that most of the study area has undergoing erosion.Both natural and an-thropogenic processes along the coast modify the shoreline configuration and control the erosion and accretion of the coastal zones.The coastal zones along the estuary have experienced accretion due to the littoral processes.The zones with headlands have more eroded than other zones along the study area.The study also shows that the coastal zones where sand is mined have relatively more rate of erosion than that of the other zones.Improper and unsustainable sand mining may also lead to severe erosion problem along this area.The shoreline change rates are altered by various geological processes along the coast.Thus,the present study implies that proper beach filling and nourishment projects should be made in the study area to save from hazards.It also indicates the advantage and suitability of DSAS to assess the shoreline changes compared with the traditional manual shoreline change analysis and prom-ising its applications for coastal zone management in other regions.     

应用空间技术研究干旱和半干旱地区由盐化作用造成的土地退化(英文)

This study applied a computerized parametric methodology to monitor, map, and quantify land degradation by salinization risk detection techniques at a 1：250 000 mapping scale using geo-information technology. The northern part of the Shaanxi province in China was taken as a case. Multi-temporal remotely sensed materials of both Landsat TM and thematic maps （ETM＋） were used as the bases to provide comprehensive views of surface conditions such as vegetation cover and salinization detection. With ERDAS ver. 9.1 software, the Normalized Differential Salinity Index （NDSl） and Salinity Index （S.I.） were computed and then evaluated for land degradation by salinization. Arc/Info ver. 9.2 software was used along with field observation data （GPS） for analysis. Using spatial analysis methods, results showed that 19 973.1 km^2 （72%） of land had no risk of land degradation by salinization, 3 684.7 km^2 （13%） had slight land degradation by salinization risk, 2 797.9 km^2 （10%） had moderate land degradation by salinization risk, and 1 218.9 km^2 （4%） of the total land area was at a high risk of land degradation by salinization. The study area, in general, is exposed to a high risk of soil salinization.     

Practical Research of IKONOS-2 Geopositioning and Its Accuracy in Tibet of China

This paper presents the studies of the refining of IKONOS-2 RPC, the transform of the datum, the mode of the control point distribution and the method of IKONOS stereo triangulation, so that IKONOS imagery can be used to collect the precise geospatial data and produce the large scale map. The transform between the IKONOS-2 image space and the national coordinate system based on the RPC have been developed, and the results of block adjustment with various control schemes in a practical project near Himalayas have been examined and analysed. The encouraging results of high positioning accuracy have been obtained.     

Landscape characterization of Sariska National Park (India) and its surroundings

Landscape characterization gives an overall information on the status of Land Use and Land Cover(LULC),changes in its composition and the impact of natural and human influences operating at different spatial and temporal scales.This information can be used to monitor changes in natural forest resources and protected areas,delineate potential conservation areas and can serve in effective management of ecologically fragile landscapes.In the present study,geo-spatial tools were used to characterize the landscape of Sariska National Park and its surroundings.Satellite data was used to prepare LULC maps for 1989 and 2000,change detection analysis and computation of landscape metrics.Climatic data,field records and modeling tools were used to map the po-tential spread of two invasive species,Prosopis juliflora and Adhatoda vasica.The results show that the forest area increased from 1989 to 2000,indicating better management practices.Landscape metrics(PAFRAC,PLADJ and AI)also support this argument.Improvements in the degraded forest can further enhance this effect.The entire reserve however is suitable for the invasion of P.juliflora and A.vasica but is more pronounced in Boswellia serrata and Anogeissus pendula-Acacia catechu(open)forests.A detailed landscape characterization map can help forest managers to make important policy decisions concerning issues such as in-vasive species.     

GPS单点测速的误差分析及精度评价 (英文)

Error sources which decrease the accuracy of GPS in absolute velocity determination have been changed since SA was turned off. Firstly, quantities of all kinds of error sources that influence velocity determination are analyzed. The potential accuracy of GPS absolute velocity determination is derived from both theory and field GPS data simulation. After that, two tests were carried out to evaluate the performance of GPS absolute velocity determination in the case of a static and an airborne GPS receiver and INS （Inertial Navigation System） instrument in kinematic mode. In static mode, the receiver velocity has been estimated to be several mm/s with the carrier-phase derived Doppler measurements, and several cm/s with the receiver generated Doppler measurements. In kinematic mode, GPS absolute velocity estimates are compared with the synchronized measurements from the high accuracy INS. The root mean square statistics of the velocity discrepancies between GPS and INS come up to dm/s. Moreover, it has a strong correlation with the acceleration or jerk of the aircraft.     

Visualization and damage assessment for flooded area

A practical method for visualizing flood area and evaluating damage is presented, which consists of two technical approaches: self-programming and adapting commercial GIS platforms. The low-cost and easy-to-use GIS-Based model developed by self-programming can meet current requirements of most local authorities, especially in developing countries. In this model, two cases, non-source flood and source flood, are distinguished and the Seed-spread algorithm suitable for source-flood is discussed; The flood damage is assessed by overlaying the flood area range with thematic maps and other related social and economic data. and all the-matic maps are converted to raster format before overlay analysis. Two measures are taken to improve the operation efficiency of speed seed-spread algorithm. The accuracy of the model mainly depends on the resolution and precision of the DEM data, and the accuracy of registering all raster layers and the quality of attribute data.     

A mobile GIS application to heavily resource-constrained devices

GIS applications to mobile devices are becoming increasingly popular, utilizing a di-verserange of devices. Many of these devices suffer from serious constraints in three main areas: processor speed, memory space and screen size. This paper presents a (;IS application, called “MacauMap“. that is intended for heavily resource-constrained handheld devices. MacauMap is a tourism oriented map application of the Macau territory for PalmOS and Pocket PC personal digital assistants. It was designed to perform satisfactorily on devices with as little as 16 MHz processor speed, and requires only 500 KB available memory for the GIS application and all GIS data. Memory requirements are kept low through a specially designed data format. The main challenge of satisfactory map drawing speed is addressed through a variety of techniques that were developed for this application. The paper describes the application‘s data format, outlines the map drawing techniques, and points out the areas for future development.     

DESIGN AND REALIZATION OF MAP DIGITIZATION SYSTEM ON MICRO-COMPUTER BASED MAP GRAPHIC WORKSTATION

The main purpose to develop a Map Graphic Workstation on thewidely used micro-computer is that by it the whole processing of map data fromcapturing,managing,editing,updating to graphic outputting can be realized.Map Digitization System（MDS）is the software system to deal with the initial andalso the most important processing.In this paper,the authors introduce a MDSon a micro-computer based Map Grphic Workstation that has been qualitified forthe producation of digital map.Since the system is designed totally independentlyand in the general frame of the Map Graphic Workstation,the capturing and man-aging and other processings for map data are in an integral manner,in which theproducation of digital map can be fulfilled conveniently.At the same time,thesystem is flexible for function extension and widely applicable to the data from dif-ferent sources and with different information characterisitcs(e.g.,the processingof Chinese characters on map).     

Transect-based three-dimensional road modeling and visualization

On the basis of the study on road elements and the existing three-dimensional road data models, this paper puts forward the transect-based road modeling, resolves the modeling of the simplest road with two road transects, and fulfils the visualization of the road. OpenGL is applied as the tool of visualization. The map texture technology, LOD algorithm and dynamic multi-differentiating texture technology are of benefit to the construction of 3D road GIS, and improve the speed of roaming and effective visualization. This paper also disusses the combination of 2D digitall road map and 3D road scene, and the dynamic response between them. Finally, on the basis of the research on the transect-based road model, this paper develops the three-dimen-sional road geographic information system called virtual road ( VRoad ), which not only supplies road designers with a set of tool which can turn the designed 2D road data into 3D road and the high road assistant function area in computer, but also supplies the road management with a set of tool which can realize the road real time and interactive roaming, high-efficiency management.     

Remote gully erosion mapping using aster data and geomorphologic analysis in the Main Ethiopian Rift

The Main Ethiopian Rift(MER)is an area of extreme topography underlain by post-Miocene volcanic rocks,Jurassic limestone and a Precambrian basement.A prime concern is the rapid expansion of wide gullies that are impinging on agricultural land.We investigate the potential contribution of Advanced Space-borne Thermal Emission and Reflection Radiometer(ASTER)data and geomorphologic parameters to discern patterns and features of gully erosion in the MER.Maximum Likelihood Classifica-tion(MLC),Support Vector Machine(SVM),and Minimum Distance(MD)classifiers are used to extract different gully shapes and patterns.Several spatial textures based on Grey Level Co-occurrence Matrices(GLCMs)are then generated.Afterwards,the same classifiers are applied to the ASTER data combined with the spatial texture information.We used geomorphologic parameters ex-tracted from SRTM and ASTER DEMs to describe the geomorphologic setting and the gullies’ shapes.The classifications show accuracies varying between 67% and 89%.Maps derived from this quantitative analysis allow the monitoring and mapping of land degradation as a direct result of gully-widening.This study reveals the utility of combining ASTER data and spatial textural infor-mation in discerning areas affected by gully erosion.     

A case study of using external DEM in InSAR DEM generation

Synthetic aperture radar interferometry (InSAR) has been used as an innovative technique for digital elevation model (DEM) and topographic map generation. In this paper, external DEMs are used for InSAR DEM generation to reduce the errors in data processing. The DEMs generated from repeat-pass InSAR are compared. For steep slopes and severe changes in topography, phase unwrapping quality can be improved by subtracting the phase calculated from an external DEM. It is affirmative that the absolute height accuracy of the InSAR DEM is improved by using external DEM. The data processing was undertaken without the use of ground control points and other manual operation.     

The Organization of Multimedia Information in electronic Map

On the basis of an electronic map-based hypermedia data model (EMBHDM),this paper makes a study on the technologies of nonlinear storage,organization,management and browsing of information,management and browing of information as well as organization of data on the basis of the relationship between multimedia information of electronic maps. This paper first analyzes some features of electronic maps and hypermedia technologty,and then illustrates the creation of EMBHDM with some examples.The tests show that this model can efficiently organize and express multimedia data.     

The study on automatic registration of InSAR images

Interferometric Synthetic Aperture Radar (InSAR) allows production of high resolution DEM and detection of small earth motions using multiple pass SAR data sets obtained by remote sensing satellite. But the whole process has not yet reached sufficient robustness to warrant automated DEM production as commonly produced by stereovision with optical images. The automatic algorithm for precision registration is one of the bottlenecks in InSAR data processing. In this paper, an automatic approach with multi-step image matching algorithm is presented. All procedures are automatically implemented. The experiment is carried out successfully with SIR-C/L-band InSAR data. The triangular piecewise rectification is also advanced in reducing local distortion between the images and processing the large scene image. The primary result has prospect in the precision registration for the repeat-track InSAR data and reveals the potential of the presented automatic strategy.     

Application of Spatial Database in Quantitative Analysis of Litho-Paleogeography—A Case Study of a Middle Ordovician Sequence Interval in the Ordos Basin

In the study of sequence stratigraphy and litho-paleogeography,quantitative analysis,precise calculation and detailed comparison of tremendous geological data,such as field profiles,logging records and seismic curves from different areas,are the basic requirements.In order to obtain a more reliable and precise result,this paper presents a novel method that combines spatial database analysis with the single-factor mapping technology to establish sequence stratigraphical succession and to map the Ordo-vician litho-paleogeography of the Ordos Basin,one of the largest oil-gas bearing basins in North China Platform.By using this method,all of the related basic geological data can be quantitatively analyzed and effectively managed.Various attributes of the ba-sic stratigraphic units and their characters,such as sequence thickness,penecontemporaneous dolostone content,shallow water parget content,and terrigenous material content,can be fully utilized statistically in facies analysis and in mapping.Based on this analysis,this paper has be exerted single-factor isopachous mapping quantitatively for each of the Ordovician sequences in the ba-sin,and finally synthesized multiple factors to reconstruct the litho-paleogeography for each of the sequence intervals.The study shows that the proposed method is quite effective and has a much higher resolution in recognizing litho-paleogeographic subunits compared with traditional ways.For example,in one of the Middle Ordovician sequence intervals(SQ19 in the Lower Majiagou Formation) of the Ordos Basin,the authors have successfully developed a mathematical formula to divide the distribution of various facies units substantially,such as old lands,submarine uplifts,supratidal zones,intertidal zones and subtidal zones.     

Influence of Adoptment of Geocentric 3D Coordinate System on Chinese Existent Maps

If a geocentric 3D coordinate system is adopted in China to replace 2D non-geocentric coordinate system, the coordinates of the surface points will be changed accordingly. The influences on the current maps of China, especially the topographic maps, are discussed due to the replacement of the coordinate systems. Taking the replacement of Xi‘an 80 coordinate system by GRS80 for a numerical example, this paper analyzes the changes of latitude, longitude, Gauss plane coordinates of the surface points, as well as the orientation and the length changes between the points on the map, including the changes of map border lines and sheet corner points.     

利用GIS技术在东兰辛市建造一个停车场

Geographic information Systems （GiS） is being widely applied to official construction activities nowadays. This technique can not only display graphs for each spatial data displayed, but also provide a broad prediction and decision tool. The purpose of this paper is to describe the capabilities of GIS application in building a new parking facility in the city of East Lansing through wide analysis of the surrounding data. The results are displayed in maps and graphs. Finally, the recommendation area is selected using three criteria： proximity to the downtown area; the degree of VACANT; and distance from all buffers.     

Expert Classification Method Based on Patch-Based Neighborhood Searching Algorithm

The expert knowledge has been widely used to improve the remotely sensed classification accuracy. Generally, the ex-pert classification system mainly depends on DEM and some thematic maps. The spatial relationship information in pixel level was commonly introduced into the expert classification. Because the geographic objects were found spatially dependent relationship to a certain degree, the commonly used basic unit of spatial relationship information in pixel greatly limited the efficiency of spatial in-formation. A patch-based neighborhood searching algorithm was proposed to implement the expert classification. The homogene-ous spectral unit, patch, was used as the basic unit in the spatial object granularity, and different types of patches' relationship in-formation were obtained through a spatial neighborhood searching algorithm. And then the neighborhood information and DEM data were added into the expert classification system and used to modify the primitive classification errors. In this case, the classi-fication accuracies of wetland, grassland and cropland were obviously improved. In this work, water was used as base object, and different types of water extraction methods were tested to get a result in a high accuracy.