正交各向异性介质中qP波入射的二阶近似反射系数与透射系数

地震波在各向异性介质中以一个准P波（qP）和两个准S波（qS1和qS2）的形式传播.研究三种波的相速度、群速度以及偏振方向等传播性质能够为各向异性介质中的正反演问题提供有效支撑.具有比横向各向同性（TI）介质更一般对称性的正交各向异性介质通常需要9个独立参数对其进行描述,这使得对传播特征的计算更为复杂.当两个准S波速度相近时具有耦合性,从而令慢度的计算产生奇异性.因此,奇异点（慢度面的鞍点和交叉点）附近的反射与透射（R/T）系数的求解不稳定,会导致波场振幅不准确.本文首次通过结合耦合S波射线理论和基于迭代的各向异性相速度与偏振矢量的高阶近似解,得到了适用于正交各向异性介质以qP波入射所产生的二阶R/T系数的计算方法.与基于一阶近似的结果相比,基于二阶近似的方法提高了qP波R/T系数的精度,能得到一阶耦合近似无法表达的准确的qP-qS转换波的R/T系数解,且方法适用于较强的各向异性介质.

     

Perturbation‐based moveout approximations in anisotropic media

The moveout approximations play an important role in seismic data processing. The standard hyperbolic moveout approximation is based on an elliptical background model with two velocities: vertical and normal moveout. We propose a new set of moveout approximations based on a perturbation series in terms of anellipticity parameters using the alternative elliptical background model defined by vertical and horizontal velocities. We start with a transversely isotropic medium with a vertical symmetry axis. Then, we extend this approach to a homogeneous orthorhombic medium. To define the perturbation coefficients for a new background, we solve the eikonal equation with horizontal velocities in transversely isotropic medium with a vertical symmetry axis and orthorhombic media. To stabilise the perturbation series and improve the accuracy, the Shanks transform is applied for all the cases. We select different parameterisations for both velocities and anellipticity parameters for an orthorhombic model. From the comparison in traveltime error, the new moveout approximations result in better accuracy comparing with the standard perturbation‐based methods and other approximations.     

Research on propagation properties of elastic waves in two-phase anisotropic media

IntroductionItiswellknownthatanisotropylieswidelyintheundergroundmedia.Anisotropicmediawhicharemetintheseismicengineeringandseismicexplorationofenergyaremainlycausedbytheperiodicthinlayers(PTL)andextensivedilatancyanisotropy(EDA).Insuchmedia,anisotropyleadstomorecomplicatepropagationofseismicwave,thesignificantfeatureinanisotropicmediaisvelocityanisotropy.Infact,undergroundstrataareverycomplicated,whichareusuallycomposedofsolidframeandfluid(suchasoil,gasesorwater)inpores.Inordertostudyseism…     

Joint PP‐ and PSV‐wave amplitudes versus offset and azimuth inversion for fracture compliances in horizontal transversely isotropic media

We propose a robust approach for the joint inversion of PP‐ and PSV‐wave angle gathers along different azimuths for the elastic properties of the homogeneous isotropic host rock and excess compliances due to the presence of fractures. Motivated by the expression of fluid content indicator in fractured reservoirs and the sensitivity of Lamé impedances to fluid type, we derive PP‐ and PSV‐wave reflection coefficients in terms of Lamé impedances, density, and fracture compliances for an interface separating two horizontal transversely isotropic media. Following a Bayesian framework, we construct an objective function that includes initial models. We employ the iteratively reweighted least‐squares algorithm to solve the inversion problem to estimate unknown parameters (i.e., Lamé impedances, density, and fracture compliances) from PP‐ and PSV‐wave angle gathers along different azimuths. Synthetic tests reveal that the unknown parameters estimated using the joint inversion approach match true values better than those estimated using a PP‐wave amplitude inversion only. A real data test indicates that reasonable results for subsurface fracture detection are obtained from the joint inversion approach.     

Geometrical characteristics of phase and group velocity surfaces in anisotropic media

The phase and group velocity surfaces are essential for wave propagation in anisotropic media. These surfaces have certain features that, especially, for shear waves result in complications for modelling and inversion of recorded wavefields. To analyse wave propagation in an anisotropic model, it is important to identify these features in both the phase and group domains. We propose few characteristics for this analysis: the energy flux angle, decomposed in the polar and azimuth angle correction angles and enhancement factor, which is able to characterize both singularity points and triplication zones. The very simple equation that controls the triplications is derived in the phase domain. The proposed characteristics are illustrated for elastic and acoustic anisotropic models of different symmetry classes.     

Spatial derivatives and perturbation derivatives of amplitude in isotropic and anisotropic media

Explicit equations for the spatial derivatives and perturbation derivatives of amplitude in both isotropic and anisotropic media are derived. The spatial and perturbation derivatives of the logarithm of amplitude can be calculated by numerical quadratures along the rays. The spatial derivatives of amplitude may be useful in calculating the higher-order terms in the ray series, in calculating the higher-order amplitude coefficients of Gaussian beams, in estimating the accuracy of zero-order approximations of both the ray method and Gaussian beams, in estimating the accuracy of the paraxial approximation of individual Gaussian beams, or in estimating the accuracy of the asymptotic summation of paraxial Gaussian beams. The perturbation derivatives of amplitude may be useful in perturbation expansions from elastic to viscoelastic media and in estimating the accuracy of the common-ray approximations of the amplitude in the coupling ray theory.     

Frequency-dependent PP and PS reflection coefficients in fractured media

When a porous layer is permeated by mesoscale fractures, wave-induced fluid flow between pores and fractures can cause significant attenuation and dispersion of velocities and anisotropy parameters in the seismic frequency band. This intrinsic dispersion due to fracturing can create frequency-dependent reflection coefficients in the layered medium. In this study, we derive the frequency-dependent PP and PS reflection coefficients versus incidence angle in the fractured medium. We consider a two-layer vertical transverse isotropy model constituted by an elastic shale layer and an anelastic sand layer. Using Chapman's theory, we introduce the intrinsic dispersion due to fracturing in the sand layer. Based on the series coefficients that control the behaviour of velocity and anisotropy parameters in the fractured medium at low frequencies, we extend the conventional amplitude-versus-offset equations into frequency domain and derive frequency-dependent amplitude-versus-offset equations at the elastic–anelastic surface. Increase in fracture length or fracture density can enlarge the frequency dependence of amplitude-versus-offset attributes of PP and PS waves. Also, the frequency dependence of magnitude and phase angle of PP and PS reflection coefficients increases as fracture length or fracture density increases. Amplitude-versus-offset type of PP and PS reflection varies with fracture parameters and frequency. What is more, fracture length shows little impact on the frequency-dependent critical phase angle, while the frequency dependence of the critical phase angle increases with fracture density.     

含黏滞流体各向异性孔隙介质中弹性波的频散和衰减

基于Biot理论,考虑液相的黏弹性变形和固液相接触面上的相对扭转,提出了含黏滞流体VTI孔隙介质模型.从理论上推导出,在该模型中除存在快P波、慢P波、SV波、SH波以外,还将存在两种新横波－慢SV波和慢SH波.数值模拟分析了6种弹性波的相速度、衰减、液固相振幅比随孔隙度、频率的变化规律以及快P波、快SV波的衰减随流体性质、渗透率、入射角的变化规律.结果表明慢SV波和慢SH波主要在液相中传播,高频高孔隙度时,速度较高;大角度入射时,快P波衰减表现出明显的各向异性,而快SV波的衰减则基本不变;储层纵向和横向渗透率存在差异时,快SV波衰减大的方向渗透率高.     

弹性各向异性介质岩石体波相速度计算

综述弹性波相速度计算的若干严格数值方法和近似解析方法,对数值算例及对不同方法作了比较.结果显示,不同数值方法得到结果一致,其适用于计算任意复杂各向异性介质岩石的相速度,但不便从物理意义的角度去分析物理参数对速度的影响;而近似解析解虽然精确程度各有不同,但是便于从物理意义的角度去进行速度分析,并在此基础上解析求取群速度这...     

横向各向同性介质和斜方介质各向异性参数的约束条件

Thomsen提出的横向各向同性(TI)介质各向异性参数(α0、β0、ε、δ、γ)是各向异性理论研究和实际资料处理中的常用参数,Thomsen参数的取值必须符合物理学定律和实际地学情况,随意的取值可能导致无意义乃至错误的结果.本文根据热力学定律和弹性常数的物理意义,结合大量的实测数据,提出常见TI介质的Thomsen参数需要满足以下约束条件:1/4f=1-β02/α02ε>-f/2; 1/2f-1δf-1); -1/2γε)/4(1-f)-1/2.Thomsen参数ε、δ、γ的取值区间主要受P、S波参考速度比β0/α0的约束,其值可正可负,实测参数中ε和γ正多负少;δ、γ、β0/α0的取值范围都有上下界,而ε没有上限;γ与ε正相关且取值上限受到ε的限制;ε、γ与δ之间不存在明显的约束.鉴于椭圆各向异性介质和薄互层等效TI介质在实际应用中的普遍性,专门给出了这两种介质各向异性参数的附加约束条件.一些在实际资料中可观测到的P波特殊偏振方向和SV波三叉现象也能为各向异性参数提供额外的约束.之后,我们将TI介质弹性常数和各向异性参数的约束条件扩展到对正交各向异性介质弹性常数和各向异性参数的约束.本文提出的各向异性参数约束条件简单实用,为各向异性理论研究和数值模拟中参数的选择提供依据,为实际资料的各向异性参数反演提供约束,既能避免出现无物理意义的研究结果,又能加速反演的搜索过程,提高生产效率,具有理论指导意义和实际应用价值.     

Numerical simulation of seismic wave in elastic and viscoelastic TTI media*

Based on the two-dimensional (2D) three-component first-order velocity-stress equation, the high order staggered mesh finite difference numerical simulation method was used to simulate the elastic and viscoelastic tilted transversely isotropic (TTI) media. The perfect matched layer (PML) absorption boundary condition was selected to eliminate the boundary effect. The results show that: ① Under the condition of fixed elastic parameters of elastic TTI medium, when the polarization angle and azimuth are 60° and 45° respectively, the degree of shear wave splitting is significantly greater than the angle of 0°; ② The influence of viscoelasticity on TTI medium is mainly reflected in the amplitude. If the quality factor decreases, the attenuation of the seismic wave amplitude increases, causing the waveform to become wider and distorted. If the quality factor increases, the viscoelastic medium becomes closer to elastic medium; ③ For TTI medium with different polarization angle and azimuth angle in the upper and lower layers, the shear wave can multiple splits at the interface of medium. The symmetry of seismograms is affected by the polarization angle and azimuth angle of TTI medium; ④ Viscoelasticity has a great influence on reflected wave, transmitted wave and converted wave in the low-velocity model. When the viscoelasticity is strong, the weaker waves may not be shown.     

Scattering and attenuation of elastic waves in random media

In seismic exploration, elastic waves are sent to investigate subsurface geology. However, the transmission and interpretation of the elastic wave propagation is complicated by various factors. One major reason is that the earth can be a very complex medium. Nevertheless, in this paper, we model some terrestrial material as an elastic medium consisting of randomly distributed inclusions with a considerable concentration. The waves incident on such an inhomogeneous medium undergo multiple scattering due to the presence of inclusions. Consequently, the wave energy is redistributed thereby reducing the amplitude of the coherent wave.The coherent or average wave is assumed to be propagating in a homogeneous continuum characterized by a bulk complex wavenumber. This wavenumber depends on the frequency of the probing waves; and on the physical properties and the concentration of discrete scatterers, causing the effective medium to be dispersive. With the help of multiple scattering theory, we are able to analytically predict the attenuation of the transmitted wave intensity as well as the dispersion of the phase velocity. These two sets of data are valuable to the study of the inverse scattering problems in seismology. Some numerical results are presented and also compared, if possible, with experimental measurements.     

Numerical investigation of the anisotropic hydraulic conductivity behavior in heterogeneous porous media

The behavior of the mean equivalent hydraulic conductivity normal and parallel to stratification (K₁, and K₂, respectively) is studied here through Monte Carlo simulations of three-dimensional, steady-state flow in statistically anisotropic, bounded, and heterogeneous media. For water flow normal to stratification in strongly heterogeneous porous media (²_Y=3) the value of K₁ is not unique; it ranges from an arithmetic to a geometric, and finally, to a harmonic mean behavior depending on field dimensions, and medium anisotropy. For a fixed anisotropy ratio and variance of Y = ln K, the larger the distance, in the direction perpendicular to stratification, over which water flow takes place, the faster the rate at which, K_H, behavior is approached. However, even for large anisotropy ratios, harmonic mean behavior appears to be a good approximation only for aquifer thickness L₁ that is large enough to allow stratified flow to occur. For small aquifer thickness (L₁/₁<8, where ₁ is the integral scale normal to stratification) the limiting behavior, for large anisotropy ratios, appears to be, instead, that of two-dimensional flow, i.e., water flows primarily parallel to the planes of stratification. When the aquifer thickness is very small compared to the horizontal dimensions (and with relative similar integral scales in the three directions) a behavior resembling arithmetic mean conditions is exhibited, i.e., water flow takes place through heterogeneous, vertical, soil volumes. The geostatistical expressions of Desbarats (1992a) for upscaling hydraulic conductivity values were utilized and closed form empirical relations were developed for the main components of the upscaled hydraulic conductivity tensor.     

带地形的可控源电磁法2.5维各向异性介质正演研究

目前,对于可控源电磁法各向异性介质2.5维问题,主要采用一次场、二次场分离的方法消除场源奇异性并降低截断边界对计算区域的影响.该方法数值计算精度高,但是很难适用于复杂地形条件下的数值模拟.针对复杂地形问题,基于总场的有限元方法表现出一定的优越性,然而,这种方法存在场源奇异性问题和截断边界问题.本文采用基于总场计算的方法对带地形的可控源电磁法2.5维各向异性介质进行模拟研究,推导了考虑电导率和介电常数各向异性的2.5维控制方程;引入网格加密-收缩算法降低场源奇异性的影响范围,提升数值计算效率;引入行波分解边界条件降低截断边界的影响;提出任意采样反傅里叶变换方法,快速、高精度地计算出空间域电磁场分量.理论模型数值算例中：首先,验证了本文算法的有效性;其次,对任意各向异性倾角产生的可控源电磁响应规律进行研究;最后,采用山丘模型对各向异性介质电磁场的响应规律进行了模拟和分析.

     

基于贝叶斯理论的叠前多波联合反演弹性模量方法

AVO反演可以获得地层岩性和流体信息,而叠前反演问题都是高维的和非适定的,因此获得可靠稳定的解对叠前反演至关重要. 本文给出了一种基于贝叶斯理论的纵波和转换波联合反演密度比和模量比的方法. 鉴于剪切模量比、体积模量比可以更好地指示油气,基于岩石物理中速度比与模量比之间的关系,将此关系式代入Zoeppritz方程的近似形式Aki-Richards公式中,得到与模量比有关的反射系数近似公式. 联合纵波和转换波,利用最小二乘准则构建目标函数,最终反演出密度比、剪切模量比、体积模量比三个参数. 在反演过程中引入贝叶斯理论,假定先验信息服从高斯分布,待求参数服从改进的Cauchy分布,并去除待求参数之间的相关性. 利用模型数据和实际数据对本文方法进行测试,并与常规的单独利用纵波数据来反演方法进行比较,结果表明联合反演稳定性更好、精度更高、抗噪音能力更强,验证了本文方法的可行性和有效性.     

任意各向异性介质中三维可控源音频大地电磁正演模拟

在一些地层层理发育的地区,地下介质存在显著的电各向异性,此时基于各向同性模型解释含各向异性效应的可控源音频大地电磁（CSAMT）测深观测数据会导致错误的结果.本文通过引入3×3的对称正定张量表征电导率各向异性,采用非结构四面体网格和矢量有限元方法离散电场满足的矢量Helmholtz方程,并将电磁场源等效为系列电偶极子,实现任意各向异性介质中CSAMT高效数值模拟.本文首先通过层状各向异性模型检验三维有限元算法的精度和有效性,进一步建立三维地电模型研究异常体各向异性和围岩各向异性对CSAMT响应的影响,最后使用视电阻率极性图来识别各向异性电导率主轴方向.数值模拟结果表明,各向异性电导率对CSAMT视电阻率幅值及分布规律都有很大影响,视电阻率极性图能够很好地识别各向异性主轴方向.

     

散射系数矩阵的计算及其应用

利用Gabor-Daubechies（G?-D）小波束域波场分解和传播在空间和方向上的双重局域性,提出了基于G?-D小波束域叠前深度偏移进行角度域成像和计算局部散射系数矩阵的方法. 以简单分层模型为例,对不同探测系统的局部散射系数矩阵分布特征进行分析. 分析结果表明,在一定的探测系统几何布局下,由本文方法得到的局部散射系数矩阵能够较真实地反映局部结构的散射(或反射)特性. 通过局部散射系数矩阵进一步外推具有不同速度反差的水平界面随角度变化的反射系数,并估计界面的空间位置和倾角等说明局部散射系数矩阵的潜在应用.     

Theory of equivalent staggered‐grid schemes: application to rotated and standard grids in anisotropic media

The previous finite‐difference numerical schemes designed for direct application to second‐order elastic wave equations in terms of displacement components are strongly dependent on Poisson's ratio. This fact makes theses schemes useless for modelling in offshore regions or even in onshore regions where there is a high Poisson's ratio material. As is well known, the use of staggered‐grid formulations solves this drawback. The most common staggered‐grid algorithms apply central‐difference operators to the first‐order velocity–stress wave equations. They have been one of the most successfully applied numerical algorithms for seismic modelling, although these schemes require more computational memory than those mentioned based on second‐order wave equations. The goal of the present paper is to develop a general theory that enables one to formulate equivalent staggered‐grid schemes for direct application to hyperbolic second‐order wave equations. All the theory necessary to formulate these schemes is presented in detail, including issues regarding source application, providing a general method to construct staggered‐grid formulations to a wide range of cases. Afterwards, the equivalent staggered‐grid theory is applied to anisotropic elastic wave equations in terms of only velocity components (or similar displacements) for two important cases: general anisotropic media and vertical transverse isotropy media using, respectively, the rotated and the standard staggered‐grid configurations. For sake of simplicity, we present the schemes in terms of velocities in the second‐ and fourth‐order spatial approximations, with second‐order approximation in time for 2D media. However, the theory developed is general and can be applied to any set of second‐order equations (in terms of only displacement, velocity, or even stress components), using any staggered‐grid configuration with any spatial approximation order in 2D or 3D cases. Some of these equivalent staggered‐grid schemes require less computer memory than the corresponding standard staggered‐grid formulation, although the programming is more evolved. As will be shown in theory and practice, with numerical examples, the equivalent staggered‐grid schemes produce results equivalent to corresponding standard staggered‐grid schemes with computational advantages. Finally, it is important to emphasize that the equivalent staggered‐grid theory is general and can be applied to other modelling contexts, e.g., in electrodynamical and poroelastic wave propagation problems in a systematic and simple way.     

用传播矩阵法研究层状交错地层中的多分量感应测井

为了实现交错沉积等复杂环境中的电磁场数值模拟,本文在常规横向同性模型的基础上引入了电导率主轴坐标系相对地层坐标系的层理方位角和倾角,建立了交错地层模型.并利用传播矩阵法建立了一维层状交错地层模型中的多分量感应测井仪器响应的正演模拟算法.首先将频率-波数域中的电磁场分解为上行和下行模式波,给出了任意朝向的磁偶极子在无限大地层中模式波的解析解.进一步通过引入地层界面上的透射、局部反射以及广义反射系数矩阵,推导了一维层状地层中的模式波表达式.在此基础上,利用二维Gauss-Legendre积分实现了Fourier逆变换,得到了可用于多分量感应测井模拟的频率-空间域磁场并矢格林函数.最后,通过多个数值模拟结果考察了井眼倾角、层理方位角和倾角变化对多分量感应测井响应的影响.

     

基于第三类边界条件的大地电磁三维矢量有限元任意各向异性正演

地球内部介质的各向异性对地球物理场解译有很大影响, 研究各向异性介质中大地电磁响应具有重要的意义.边界条件是影响电磁场正演精度的一个关键因素, 其中第一类边界条件需要将底面边界设置在离异常体足够远的地方, 面临着计算规模大、求解速度慢的问题.相比第一类边界条件, 第三类边界条件具有计算规模更小、计算精度更高的优点, 在三维各向同性正演中被广泛使用.然而, 各向异性使得第三类边界条件理论变得更为复杂, 目前尚未见到采用第三类边界条件的大地电磁三维各向异性正演.本文推导出各向异性介质中三维矢量有限元底界面的第三类边界条件, 通过模型计算对算法的可靠性和精度进行了验证.结果表明, 当精度相同时, 第三类边界条件的计算规模可以更小; 而当底界面离异常体较近时, 第三类边界条件有着更高的精度.