Distribution of protons and Cd between bacterial surfaces and dissolved humic substances determined through chemical equilibrium modeling

Bacteria and dissolved humic substances are capable of binding significant concentrations of metals in natural environments. Recent advances in understanding bacteria-metal and humic-metal complexation have provided a framework for directly comparing the binding capacities of these components. In this study, we use chemical equilibrium modeling to construct an internally consistent set of thermodynamic equilibrium constants for proton and Cd binding onto dissolved humic substances, using a variety of published data sets. Our modeling approach allows for the direct comparison of humic substance binding constants and site densities to those previously published for proton and Cd binding onto natural consortia of bacteria. We then combine these constants into a unified model that accounts for the competition between bacterial surfaces and humic and fulvic acids in order to determine the relative importance of each component on the total Cd budget. The combined model is used to examine the relative contributions of bacteria and dissolved humic substances to Cd complexation in natural settings. Calculations are performed for three representative systems: (1) one with a maximum realistic concentration of bacteria and a minimum realistic concentration of humic substance, (2) one with a maximum realistic concentration of humic substance and a minimum concentration of bacteria, and (3) one with an intermediate concentration of both components.Our modeling results indicate that dissolved humic substances have 2 orders of magnitude more available binding sites than bacterial surfaces (per gram). Humic substances also have a greater affinity than bacterial surfaces for binding Cd over circumneutral pH ranges. The combined model results demonstrate that, depending upon their relative concentrations, both Cd-humic and Cd-bacteria complexes are capable of dominating Cd-speciation in specific natural environments. This modeling approach is useful in that it can easily be extended to include other metals and binding ligands; however, thermodynamic data must be gathered on additional components to facilitate the modeling of more realistic systems.     

Competitive adsorption of metal cations onto two gram positive bacteria: testing the chemical equilibrium model

In order to test the ability of a surface complexation approach to account for metal-bacteria interactions in near surface fluid-rock systems, we have conducted experiments that measure the extent of adsorption in mixed metal, mixed bacteria systems. This study tests the surface complexation approach by comparing estimated extents of adsorption based on surface complexation modeling to those we observed in the experimental systems. The batch adsorption experiments involved Ca, Cd, Cu, and Pb adsorption onto the surfaces of 2 g positive bacteria: Bacillus subtilis and Bacillus licheniformis. Three types of experiments were performed: 1. Single metal (Ca, Cu, Pb) adsorption onto a mixture of B. licheniformis and B. subtilis; 2. mixed metal (Cd, Cu, and Pb; Ca and Cd) adsorption onto either B. subtilis or B. licheniformis; and 3. mixed or single metal adsorption onto B. subtilis and B. licheniformis. %Independent of the experimental results, and based on the site specific stability constants for Ca, Cd, Cu, and Pb interactions with the carboxyl and phosphate sites on B. licheniformis and B. subtilis determined by Fein et al. (1997), by Daughney et al. (1998) and in this study, we estimate the extent of adsorption that is expected in the above experimental systems.Competitive cation adsorption experiments in both single and double bacteria systems exhibit little adsorption at pH values less than 4. With increasing pH above 4.0, the extent of Ca, Cu, Pb and Cd adsorption also increases due to the increased deprotonation of bacterial surface functional groups. In all cases studied, the estimated adsorption behavior is in excellent agreement with the observations, with only slight differences that were within the uncertainties of the estimation and experimental procedures. Therefore, the results indicate that the use of chemical equilibrium modeling of aqueous metal adsorption onto bacterial surfaces yields accurate predictions of the distribution of metals in complex multicomponent systems.     

Comparison of the acid-base behaviour and metal adsorption characteristics of a gram-negative bacterium with other strains

Thermodynamic parameters for proton and metal adsorption onto a gram-negative bacterium from the genus Enterobacteriaceae have been determined and compared with parameters for other strains of bacteria. Potentiometric titrations were used to determine the different types of sites present on bacterial cell walls. Stability constants for adsorption of Pb, Cu and Zn to specific sites were determined from batch adsorption experiments at varying pH with constant metal concentration. Titrations revealed 3 distinct acidic surface sites on the bacterial surface, with pK values of 4.3±0.2, 6.9±0.5 and 8.9±0.5, corresponding to carboxyl, phosphate and hydroxyl/amine groups, with surface densities of 5.0±0.7×10⁻⁴, 2.2±0.6×10⁻⁴ and 5.5±2.2×10⁻⁴ mol/g of dry bacteria. Only carboxyl and phosphate sites are involved in metal uptake, yielding the following intrinsic stability constants: Log K_carboxyl: Zn=3.3±0.1, Pb=3.9±0.8, and Cu=4.4±0.2, Log K_phosphoryl: Zn=5.1±0.1 and Pb=5.0±0.9. The deprotonation constants are similar to those of other strains of bacteria, while site densities are also within an order of magnitude of other strains. The similarities in surface chemistry and metal stability constants suggest that bacteria may be represented by a simple generic thermodynamic model for the purposes of modelling metal transport in natural environments. Comparison with oxide-coated sand shows that bacteria can attenuate some metals to much lower pH values.     

Trace metals in oxic lake sediments: possible adsorption onto iron oxyhydroxides

Apparent overall equilibrium constants for the adsorption of Cd, Cu, Ni, Pb and Zn onto natural iron oxyhydroxides have been calculated from the partitioning of these trace metals in oxic lake sediments and the in situ measurement of trace metal concentrations in the associated pore waters. Such values obtained from lakes of various pH located on the Precambrian Shield, in the area of Sudbury, Ontario, are compared with equilibrium constants obtained for the adsorption of the trace metals onto iron oxyhydroxides in well-defined media.The field data are consistent with laboratory experiments reported in the literature and with theory. Both the influence of pH upon adsorption and the binding strength sequence observed for the field data agree with theory. At high sediment pH values, the partitioning of Cd, Ni and Zn between the pore waters and the natural iron oxyhydroxides is similar to those reported in the literature for the adsorption of these metals at low surface coverage onto amorphous iron oxyhydroxides in a NaNO₃ medium; deviation from this simple model is however observed for Cu and Pb, presumably due to the competitive action of dissolved ligands. At low sediment pH values, the adsorption is much higher than predicted by the simple model and can be explained by the formation of ternary complexes with the iron oxyhydroxide surface.     

The effect of species diversity on metal adsorption onto bacteria

In this study, we measure proton, Pb, and Cd adsorption onto the bacteria Deinococcus radiodurans, Thermus thermophilus, Acidiphlium angustum, Flavobacterium aquatile, and Flavobacterium hibernum, and we calculate the thermodynamic stability constants for the important surface complexes. These bacterial species represent a wide genetic diversity of bacteria, and they occupy a wide range of habitats. All of the species, except for A. angustum, exhibit similar proton and metal uptake. The only species tested that exhibits significantly different protonation behavior is A. angustum, an acidophile that grows at significantly lower pH than the other species of this study. We demonstrate that a single, metal-specific, surface complexation model can be used to reasonably account for the acid/base and metal adsorption behaviors of each species. We use a four discrete site non-electrostatic model to describe the protonation of the bacterial functional groups, with averaged pK_a values of 3.1 ± 0.3, 4.8 ± 0.2, 6.7 ± 0.1, and 9.2 ± 0.3, and site concentrations of (1.0 ± 0.17) × 10⁻⁴, (9.0 ± 3.0) × 10⁻⁵, (4.6 ± 1.8) × 10⁻⁵, and (6.1 ± 2.3) × 10⁻⁵ mol of sites per gram wet mass of bacteria, respectively. Adsorption of Cd and Pb onto the bacteria can be accounted for by the formation of complexes with each of the bacterial surface sites. The average log stability constants for Cd complexes with Sites 1-4 are 2.4 ± 0.4, 3.2 ± 0.1, 4.4 ± 0.1, and 5.3 ± 0.1, respectively. The average log stability constants for Pb complexes with Sites 1-4 are 3.3 ± 0.2, 4.5 ± 0.3, 6.5 ± 0.1, and 7.9 ± 0.5, respectively. This study demonstrates that a wide range of bacteria exhibit similar proton and metal adsorption behaviors, and that a single set of averaged acidity constants, site concentrations, and stability constants for metal-bacterial surface complexes yields a reasonable model for the adsorption behavior of many of these species. The differences in adsorption behavior that we observed for A. angustum demonstrate that genetic differences do exist between the cell wall functional group chemistries of some bacterial species, and that significant exceptions to the typical bacterial adsorption behavior do exist.     

Copper isotope fractionation during surface adsorption and intracellular incorporation by bacteria

Copper isotopes may prove to be a useful tool for investigating bacteria-metal interactions recorded in natural waters, soils, and rocks. However, experimental data which attempt to constrain Cu isotope fractionation in biologic systems are limited and unclear. In this study, we utilized Cu isotopes (δ⁶⁵Cu) to investigate Cu-bacteria interactions, including surface adsorption and intracellular incorporation. Experiments were conducted with individual representative species of Gram-positive (Bacillus subtilis) and Gram-negative (Escherichia coli) bacteria, as well as with wild-type consortia of microorganisms from several natural environments. Ph-dependent adsorption experiments were conducted with live and dead cells over the pH range 2.5-6. Surface adsorption experiments of Cu onto live bacterial cells resulted in apparent separation factors (Δ⁶⁵Cu_{solution-solid} = δ⁶⁵Cu_solution − δ⁶⁵Cu_solid) ranging from +0.3‰ to +1.4‰ for B. subtilis and +0.2‰ to +2.6‰ for E. coli. However, because heat-killed bacterial cells did not exhibit this behavior, the preference of the lighter Cu isotope by the cells is probably not related to reversible surface adsorption, but instead is a metabolically-driven phenomenon. Adsorption experiments with heat-killed cells yielded apparent separation factors ranging from +0.3‰ to −0.69‰ which likely reflects fractionation from complexation with organic acid surface functional group sites. For intracellular incorporation experiments the lab strains and natural consortia preferentially incorporated the lighter Cu isotope with an apparent Δ⁶⁵Cu_{solution-solid} ranging from ∼+1.0‰ to +4.4‰. Our results indicate that live bacterial cells preferentially sequester the lighter Cu isotope regardless of the experimental conditions. The fractionation mechanisms involved are likely related to active cellular transport and regulation, including the reduction of Cu(II) to Cu(I). Because similar intracellular Cu machinery is shared by fungi, plants, and higher organisms, the influence of biological processes on the δ⁶⁵Cu of natural waters and soils is probably considerable.     

Trace metal adsorption onto urban stream suspended particulate matter (Auckland region,New Zealand)

Trace metal adsorption to suspended particulate matter (SPM) influences bioavailability and toxicity of trace metals in natural waters. For highly contaminated urban catchments in the greater Auckland (New Zealand) area, trace metal adsorption to SPM was assessed and compared to similar data from non-urban catchments in the Auckland region, to determine whether there was any difference in the ability of the SPM to adsorb Cu, Pb and Zn. The degree of trace metal adsorption onto the SPM was assessed by way of adsorption edge experiments. It was found that the ability of the Auckland urban SPM to adsorb trace metals decreased in the order Pb > Cu > Zn. Little difference in adsorption was observed between the non-urban Waikato and Kaipara River SPM and urban SPM, or between urban SPM from different flow regimes and seasons, despite some compositional differences in the SPM. This suggests that on the basis of a single surface-binding site, metal adsorption onto SPM could be readily predicted across a range of urban and non-urban catchments in the Auckland region. Adsorption edges were modelled with a diffuse layer, surface complexation model to assess the role of Fe-oxide in adsorption. The MINTEQA2 model was used, assuming Fe-oxide (as HFO) was the only adsorbing surface. There was generally good agreement between observed and modelled adsorption for Pb, indicating the importance of Fe-oxide surfaces for Pb adsorption. However, the model did not predict Zn or Cu adsorption as well. The TOC content of the SPM, and presence of dissolved ligands and organic matter in the water column, appeared to play an important role in Cu adsorption to the SPM. For Zn, the presence of adsorbing surfaces other than HFO appeared to influence adsorption.     

Cd adsorption onto Pseudomonas putida in the presence and absence of extracellular polymeric substances

The role of bacterial extracellular polymeric substances (EPS) in metal adsorption was determined by studying Cd adsorption onto the gram-negative bacterial species Pseudomonas putida with and without enzymatic removal of EPS from the biomass material. A range of experimental approaches were used to characterize the Cd adsorption reactions, including bulk proton and Cd adsorption measurements, FTIR spectroscopy, and fluorescence microscopy. The proton-reactivities of the biomass samples with EPS are not significantly different from those obtained for EPS-free biomass. Similarly, the presence of EPS does not significantly affect the extent of Cd removal from solution by the biomass on a mass-normalized basis, based on bulk Cd adsorption measurements conducted as a function of pH, nor does it appear to strongly affect the Cd-binding groups as observed by FTIR. However, fluorescence microscopy indicates that Cd, although concentrated on cell walls, is also bound to some extent to EPS. Together, the results from this study suggest that the P. putida EPS can bind significant concentrations of Cd from solution, and that the nature and mass-normalized extent of the binding is similar to that of the cell wall. Therefore, the EPS-bearing systems do not exhibit enhanced mass-normalized removal of Cd from solution relative to the EPS-free systems. The presence of the EPS effectively increases the viability of cells exposed to aqueous Cd, likely due to sequestration of the Cd away from the cells due to Cd-EPS binding.     

Cd adsorption onto Anoxybacillus flavithermus: Surface complexation modeling and spectroscopic investigations

Several recent studies have applied surface complexation theory to model metal adsorption behaviour onto mesophilic bacteria. However, no investigations have used this approach to characterise metal adsorption by thermophilic bacteria. In this study, we perform batch adsorption experiments to quantify cadmium adsorption onto the thermophile Anoxybacillus flavithermus. Surface complexation models (incorporating the Donnan electrostatic model) are developed to determine stability constants corresponding to specific adsorption reactions. Adsorption reactions and stoichiometries are constrained using spectroscopic techniques (XANES, EXAFS, and ATR-FTIR). The results indicate that the Cd adsorption behaviour of A. flavithermus is similar to that of other mesophilic bacteria. At high bacteria-to-Cd ratios, Cd adsorption occurs by formation of a 1:1 complex with deprotonated cell wall carboxyl functional groups. At lower bacteria-to-Cd ratios, a second adsorption mechanism occurs at pH > 7, which may correspond to the formation of a Cd-phosphoryl, CdOH-carboxyl, or CdOH-phosphoryl surface complex. X-ray absorption spectroscopic investigations confirm the formation of the 1:1 Cd-carboxyl surface complex, but due to the bacteria-to-Cd ratio used in these experiments, other complexation mechanism(s) could not be unequivocally resolved by the spectroscopic data.     

An X-ray absorption spectroscopy study of Cd binding onto bacterial consortia

In this study, we use extended X-ray absorption fine structure (EXAFS) spectroscopy measurements to examine the atomic environment of Cd bound onto two experimental bacterial consortia: one grown from river water, and one grown from a manufacturing gas plant site. The experiments were conducted as a function of pH and demonstrate that the complex mixtures of bacteria, containing both Gram-positive and Gram-negative species, yield relatively simple EXAFS spectra, a result which indicates that only a limited number of functional group types contribute to Cd binding for each bacterial consortium. The EXAFS spectra indicate that the average Cd binding environment in the river water consortium varies significantly with pH, but the manufacturing gas plant consortium exhibits a Cd binding environment that remains relatively constant over the pH range examined. The EXAFS data for the river water consortium were modeled using carboxyl, phosphoryl and sulfhydryl sites. However, only carboxyl and phosphoryl sites were required to model the manufacturing gas plant consortium data under similar experimental conditions. This is the first EXAFS study to identify and quantify the relative importance of metal binding sites in bacterial consortia. Although our results indicate differences in the binding environments of the two consortia, the data suggest that there are broad similarities in the binding environments present on a wide range of bacterial cell walls.     

Marine scavenging: Trace metal adsorption by interfacial sediment from MANOP Site H

The adsorption of thirteen trace metals from seawater was studied on interfacial sediment from MANOP site H. The adsorption data indicate a long (~20 day) equilibration time for most metals, an increase in adsorption with an increase in pH and particle concentration, a dependence of adsorption on total metal concentration at high adsorption densities, and a lack of correlation between metal binding ability and metal hydrolysis in solution.Apparent equilibrium binding constants normalized to the total number of available sites on the solid were determined for metal binding with the interfacial sediment. The binding constants indicate that the affinity sequence for metal interactions with the interfacial sediment is: Pb > Fe > Sn ? Co≈ Mn > Cu > Be > Sc ? Zn > Ni > Cd ? Ba > Cs at pH 7.82 in seawater.A comparison of the binding constants for suspended particles, interfacial sediment, and surface sediment indicate that the composition of particles influences the binding ability of the particles. Biogenic particles tend to bind most metals more strongly than lithogenic or authigenic particles.Based on limited data, there is a strong positive correlation between the measured binding constants and the observed partitioning of metals between sediment and seawater.     

Comparison of trace metal adsorption onto different solid materials and their chemical components in a natural aquatic environment

Solid materials such as suspended particulate matter (SPM), deposited sediment (DS) and natural surface coatings (NSC, composed of biofilms and associated minerals) are important sinks and potential sources of pollutants in natural aquatic environments. Although these materials can exist in the same water body, few studies have been conducted to compare their ability to adsorb trace metals. In this study, the adsorption of Pb, Cu and Cd by these solids, collected from an urban lake, was investigated. In addition, the metal adsorption properties of the main components of these solids, namely Mn and Fe oxides and organics, were also investigated using the method of selective extraction followed by metal adsorption. The solids that co-existed in water showed similarities and differences in their compositions. For each metal, adsorption to the solids occurred in the same order: NSC > SPM > DS. For Pb and Cd, Fe and Mn oxides and organics contributed to the adsorption by NSC and SPM, and the adsorption by DS was dominated by Fe oxides. For Cu, the organics were the main adsorptive phase. The specific adsorption capability of these components decreases in the following order: Mn oxides > Fe oxides > organics. Overall, the results presented herein indicate that different solids and their components played important roles in the adsorption of trace metals.     

The effect of aqueous metal-chlorophenolate complexation on contaminant transport in groundwater systems

Aqueous metals and chlorophenols are common co-contaminants of groundwater systems. However, the importance of aqueous metal-chlorophenolate complexation cannot be accurately assessed because the stability constants for environmentally important aqueous metal-phenolate and metal-chlorophenolate complexes have not been measured. In order to determine the role these complexes play in contaminant transport, this study applies a correlation technique to the limited data that do exist to estimate the stabilities of metal-chlorophenolate complexes of environmental interest. Speciation calculations that are based on these estimated stability constants indicate that aqueous metal-chlorophenolate complexation may significantly affect both aqueous metal and dissolved chlorophenolate species distributions. Therefore, aqueous metal-chlorophenolate complexation may affect the extent of adsorption of both metals and chlorophenolates onto mineral surfaces. In addition, aqueous complexation may significantly enhance dissolution of aquifer aluminosilicate minerals. This study suggests that aqueous complexation between metals and chlorophenolates can significantly affect the mobility of metal and phenolic contaminants.     

Modeling on adsorption–desorption of trace metals to suspended particle matter in the Changjiang Estuary

The uptake and release of trace metals (Cu, Ni, Zn, Cd, and Co) in estuaries are studied using river and sea end-member waters and suspended particulate matter (SPM) collected from the Changjiang Estuary, China. The kinetics of adsorption and desorption were studied in terms of environmental factors (pH, SPM loading, and salinity) and metal concentrations. The uptake of the metals studied onto SPM occurred mostly within 10 h and reached an asymptotic value within 40 h in the Changjiang Estuary. As low pH river water flows into the high pH seawater and the water become more alkaline as it approaches to the seaside of estuary, metals adsorb more on SPM in higher pH water, thus, particulate phase transport of metal become increasingly important in the seaward side of the estuary. The percentage of adsorption recovery and the distribution coefficients for trace metals remained to be relatively invariable and a significant reduction only occurred in very high concentrations of metals (>0.1 mg L⁻¹). The general effect of salinity on metal behavior was to decrease the degree of adsorption of Cu, Zn, Cd, Co, and Ni onto SPM but to increase their adsorption equilibrium pH. The adsorption–desorption kinetics of trace metals were further investigated using Kurbatov adsorption model. The model appears to be most useful for the metals showing the conservative behavior during mixing of river and seawater in the estuary. Our work demonstrates that dissolved concentration of trace metals in estuary can be modeled based on the metal concentration in SPM, pH and salinity using a Kurbatov adsorption model assuming the natural SPM as a simple surfaced molecule.     

Ternary interactions in a humic acid–Cd–bacteria system

Humic acid adsorption onto the bacterial surface of Bacillus subtilis was measured with and without Cd, as a function of pH and humic–bacteria–Cd ratios. These experiments tested for the existence of ternary interactions in a bacteria–humic–metal system. We determine both the effects of humic acid on the bacterial adsorption of Cd, as well as the effects of the aqueous metal cation on the bacterial adsorption of humic acid. The presence of Cd does not affect the extent of humic acid adsorption onto the bacterial surface, indicating that there is no competition for sorption sites between humic acid and Cd under the experimental conditions, and that changes in the charging properties of the bacterial surface, as a result of the Cd adsorption, are not significant enough to affect humic acid adsorption.

The presence of humic acid does diminish Cd adsorption onto the bacterial surface, suggesting the presence of an aqueous Cd–humate complex under mid to high pH conditions. However, we also observe that the solubility of humic acid is unaffected by the presence of aqueous Cd. This apparently inconsistent behavior of an aqueous Cd–humate complex affecting Cd adsorption but not affecting humic acid solubility is not observed with simpler ionizable organic molecules. We propose that the solubility of humic acid is controlled by the solubility of a less soluble fraction of the acid. Cd forms an aqueous complex with the more soluble fraction of humic acid and there is no interdependence between the aqueous activities of the more and less soluble fractions. That is, the solubility of one humic acid fraction is unaffected by the presence of an aqueous Cd–humate complex involving another humic acid fraction. These experimental results constrain the relative importance of surface ternary and aqueous metal–humate complexes on the bacterial adsorption of both humic acid and metal cations.     

The development of a multi-surface soil speciation model for Cd (II) and Pb (II): Comparison of two approaches for metal adsorption to clay fractions

The mobility of toxic metals in soils or sediments is of great concern to scientists and environmentalists since it directly affects the bioavailability of metals and their movement to surface and ground waters. In this study, a multi-surface soil speciation model for Cd (II) and Pb (II) was developed to predict the partition of metals on various soil solid components (e.g. soil organic matter (SOM), oxide mineral, and clay mineral). In previous study, the sorption of metal cations on SOM and oxide minerals has been evaluated by thermodynamically based surface complexation model. However, metal binding to soil clay fractions was normally treated in a simplistic manner: only cation exchange reactions were considered and exchange coefficient was assumed unity. In this study, the binding of metals onto clays was described by a two-site surface sorption model (a basal surface site and an edge site). The model was checked by predicting the adsorption behavior of Cd (II) and Pb (II) onto three selected Chinese soils as a function of pH and ionic strengths. Results showed that the proposed model more accurately predicted the metal adsorption on soils under studied condition, especially in low ionic strength condition, suggesting that adsorption of metals to soil clay fractions need to be considered more carefully when modeling the partition of trace elements in soils. The developed soil speciation model will be useful when evaluating the movement and bioavailability of toxic metals in soil environment.     

Potential of natural bed soil in adsorption of heavy metals in industrial waste landfill

Development of higher welfare could not be realized unless by energy consumption and other natural resources. Growth of industrial complexes has shown an unprecedented trend during recent years. Many of these towns have no treatment systems for the industrial wastes leachates. Besides, the chemical composition of wastes in such complexes varies considerably due to the different kinds of industries. It is endeavored in the present work to study the natural potential of soil to treat leachate of such industrial wastes. For this purpose, the Aliabad industrial complex in Tehran — Garmsar road was selected as the study area. The potential of adsorption of elements such as nickel, copper, cadmium, zinc, chromium, lead and manganese was investigated. The results indicated that the soil potential to adsorb heavy metals (except for manganese) was very high (95 %) in the adsorption of heavy metals (except for manganese). Further, chemical partitioning studies revealed that heavy metals are associated with various soil phases such as loosely bonded ions, sulfide and organics to various extents. Among the mentioned soil phases, one can deduce that major portion of metal contaminants is absorbed as loosely bonded ions. Organic bond and sulfide bond are in the 2^nd and 3^rd positions of metal contaminants adsorption, respectively. The results of the present study apparently showed that soil column had ample capacity to adsorb metal contaminants. Thus, determination of soil potential in adsorption of heavy metals during site selection is as important criteria.     

Similar Adsorption Parameters for Trace Metals with Different Aquatic Particles

Conditional surface binding constants and complexation capacities for Zn, Pb, Cd, and Cu were determined from surface titration experiments of heterogeneous natural aquatic particulate matter of different origin and composition. Metals and particles were evaluated in naturally occurring concentration ranges in river water.The adsorption of trace metals can be adequately described with a single conditional binding constant over a wide range of metal : particle ratios. Binding constants for aquatic particles at pH 8.0 are remarkably independent from particle composition and are specific for each metal: log K^ads _Zn = 8.39, log K^ads _Pb = 9.67, log K^ads _Cd = 8.61, log ^ads _Cu = 9.84. From competition experiments with Ca and Pb we extracted a sorption coefficient for Ca of log K^ads _Ca = 2.5 (pH 8.0). Maximum surface binding capacities for all metal ions were found for particles containing high fractions of Mn-oxides which are associated with large specific surface areas. Generally, we found sorption capacities to decrease in the sequence Cu Pb, Zn > Cd.The experiments suggest that the conditional surface binding constants and complexation capacities are applicable to model trace metal adsorption in the concentration ranges of natural waters under conditions similar to the experiments. Results also imply that the chemical nature of particle surface sites is rather uniform in the intermediate concentration range or that the array of binding sites averages out differences in sorption strength over the prevailing concentration range of metal ions, respectively.     

Competitive heavy metals adsorption on natural bed sediments of Jajrood River,Iran

The presence of heavy metal concentrations was examined in natural sediments from four sites along the Jajrood river in northeast of Tehran, the capital of Iran. Besides determination of elemental concentrations (Pb, Cu, Zn, Cd, Ni and Cr), X-ray fluorescence and X-ray diffraction tests were carried out to determine other chemical components in these adsorbents. Also the ability of sediments to adsorb these heavy metal ions from aqueous solutions was investigated. Results show that the extent of adsorption increases with increase in adsorbent concentration. The amount of adsorbed Pb, Cu and Zn in sediments was much greater than that of the other metals, and Cr was adsorbed much less than others. The adsorbabilities of sediments to heavy metals increased in the order of Pb > Cu > Zn > Cd > Ni > Cr. Based on the adsorption data, equilibrium isotherms were determined at selected areas to characterize the adsorption process. The adsorption data followed Freundlich and Langmuir isotherms in most cases. Correlation and cluster analysis was performed on heavy metals adsorption and sediment components at each site to evaluate main adsorbing compounds in sediments for each metal. Results demonstrated that heavy metals sorption is mostly related to load of organic matter in the Jajrood river sediments.     

Modeling the adsorption of Cd (II), Cu (II), Ni (II), Pb (II) and Zn (II) onto montmorillonite

The adsorption of five toxic metallic cations, Cd(II), Cu(II), Ni(II), Pb(II) and Zn(II), onto montmorillonite was investigated as a function of pH and ionic strength and a two-site surface complexation model was used to predict the adsorption data. The results showed that in the lower pH range, 3∼6 for Cd, Cu, Ni and Zn, and 3∼4.5 for Pb, the adsorption was greatly affected by ionic strength, while in the higher pH range, the adsorption was not. In the lower pH range, the metallic cations were mainly bound through the formation of outer-sphere surface on the permanently charged basal surface sites (≡X⁻), while in the higher pH range the adsorption occurred mainly on the variably charged edge sites (≡SOH) through the formation of inner-sphere surface complexes. Acid-base surface constants and metal binding constants for the two sites were optimized using FITEQL. The adsorption affinity of the five metallic cations to the permanently charged sites of montmorillonite was Pb > Cu > Ni ≈ Zn ≈ Cd, while that to the variable charged sites was Pb ? Cu > Zn > Cd > Ni.