Occurrence and implications of secondary olivine veinlets in lunar highland breccia Northwest Africa 11273

Lunar breccias preserve the records of geologic processes on the Moon. In this study, we report the occurrence, petrography, mineralogy, and geologic significance of the observed secondary olivine veinlets in lunar feldspathic breccia meteorite Northwest Africa (NWA) 11273. Bulk‐rock composition measurements show that this meteorite is geochemically similar to other lunar highland meteorites. In NWA 11273, five clasts are observed to host veinlets that are dominated by interconnecting olivine mineral grains. The host clasts are mainly composed of mafic minerals (i.e., pyroxene and olivine) and probably sourced from a basaltic lithology. The studied olivine veinlets (~5 to 30 μm in width) are distributed within the mafic mineral host, but do not extend into the adjacent plagioclase. Chemically, these olivine veinlets are Fe‐richer (Fo_41.4–51.9), compared with other olivine grains (Fo_54.3–83.1) in lithic clasts and matrix of NWA 11273. By analogy with the secondary olivine veinlets observed in meteorites from asteroid Vesta (howardite–eucrite–diogenite group samples) and lunar mare samples, our study suggests that the newly observed olivine veinlets in NWA 11273 are likely formed by secondary deposition from a lunar fluid, rather than by crystallization from a high‐temperature silicate melt. Such fluid could be sulfur‐ and phosphorous‐poor and likely had an endogenic origin on the Moon. The new occurrence of secondary olivine veinlets in breccia NWA 11273 reveals that the fluid mobility and deposition could be a previously underappreciated geological process on the Moon.     

On the possible origin of troilite‐metal nodules in the Katol chondrite (L6‐7)

Microtextural study of a single troilite‐metal nodule (TMN) from the Katol L6‐7 chondrite, a recent fall (May, 2012) in India suggests that the TMN is primarily an aggregate of submicron‐scale intergrowth of troilite and kamacite (mean Ni: 6.18 wt%) juxtaposed with intensely fractured silicates, mainly olivine (Fa: 25 mole%), low‐Ca pyroxene (Fs: 21.2 mole%), and a large volume of maskelynite. Evidence of shock textures in the TMN indicates a high degree of shock metamorphism that involves plagioclase‐maskelynite and olivine‐wadsleyite/ringwoodite transformations and formation of quenched metal‐sulfide melt textures due to localized shear‐induced frictional melting. It is inferred that the TMN formation is an independent, localized event by a high energy impact and its subsequent incorporation in the ejected chondritic fragment of the parent body. Katol chondrite has been calibrated with a peak shock pressure of S5 (~45 GPa) after Stöffler et al. (1991), whereas peak shock pressure within the TMN exceeds the shock facies S6 (>45 GPa) following Bennett and McSween (1996) and Stöffler et al. (1991). Overall, the shock‐thermal history of the Katol TMN is dissimilar as compared to the host chondrite.     

Pervasive shock melting at >65 GPa in a Martian basalt,the shergottite Northwest Africa 14672

Shergottites have provided abundant information on the volcanic and impact history of Mars. Northwest Africa (NWA) 14672 contributes to both of these aspects. It is a vesicular ophitic depleted olivine–phyric shergottite, with average plagioclase An₆₁Ab₃₉Or_0.2. It is highly ferroan, with pigeonite compositions En_49-25Fs_41-61Wo_10-14 like those of basaltic shergottites, for example, NWA 12335. Olivine (Fo_53-15) has discrete ferroan overgrowths, more ferroan when in contact with plagioclase than when enclosed by pyroxene. The pyroxene (a continuum of augite, subcalcic augite, and pigeonite) is patchy, with ragged “cores” enveloped or invaded by ferroan pyroxene. Magma mixing may be responsible for capture of olivine and formation of pyroxene mantles. The plagioclase is maskelynite-like in appearance, but the original laths were (congruently) melted and the melt partly crystallized as fine dendrites. Most of the 14% vesicles occur within plagioclase. Olivine, pyroxene, and ilmenite occur in part as fine aggregates crystallized after congruent melting with limited subsequent liquid mixing. There are two fine-grained melt components, barred plagioclase with interstitial Fe-bearing phases, and glass with olivine dendrites, derived by melting of mainly plagioclase and mainly pyroxene, respectively. Rare silica particles contain coesite and/or quartz, and silica glass. The rock has experienced >50% melting, compatible with peak pressure >~65 GPa. It is the most highly shocked shergottite so far, at shock stage S6/7. It may belong to the group of depleted shergottites ejected at ~1 Myr from Tooting Crater.     

Redistribution of elements in the heavily shocked Yanzhuang chondrite

Abstract— Compositions of metal, sulfide, olivine, pyroxene, and plagioclase/plagioclase glass were studied for the melted and unmelted parts of the heavily shocked H6(S6) chondrite‐Yanzhuang. We found that the partitioning of some trace elements significantly changed between the 2 parts; compared with the corresponding minerals in the unmelted part, Ga is enriched in the metal, Co, Cr, and Zn are enriched in the sulfide, Cr is enriched in olivine and pyroxene, and Ti is enriched in the plagioclase glass of the melt pocket. These detailed studies of the mineral phases put constraints on 3 important parameters (temperature, pressure, and duration) associated with the post‐shock melting process. The coexistence of melted and unmelted olivine in the melt pocket of Yanzhuang implies a peak temperature after shock that approaches the melting point of olivine. The lack of Ni in the olivine crystallized from a melt suggests crystallization of olivine at pressures below 10 kbar. The resetting of Ga partitioning between metal and silicate in the melt pocket indicates that the interval from the peak temperature after shock to the crystallization of metal‐sulfide and plagioclase glass in the melted part of Yanzhuang is longer than 500 sec.     

Petrology and geochemistry of Northwest Africa 5480 diogenite and evidence for a basin‐forming event on Vesta

We performed a petrological and geochemical study of an olivine diogenite, Northwest Africa (NWA) 5480. NWA 5480 is a crystalline stone, but shows a heterogeneous texture. Olivine aggregates and grains of olivine and chromite display resorption textures set in a crystalline pyroxene matrix. Large olivine aggregates are penetrated by pyroxene matrix. Flow textures are observed near olivine aggregates. Olivine, chromite, and pyroxene show minor chemical zoning, implying relatively rapid cooling. NWA 5480 contains a significant amount of platinum group elements with chondritic relative proportions. All this evidence supports that NWA 5480 is an impact‐melt breccia from a target composed of olivine and pyroxene‐rich lithologies. Such impact melt would have formed by melting crustal materials, possibly during one of the impacts that formed the South Pole basins on Vesta.     

Petrogenesis of Miller Range 07273, a new type of anomalous melt breccia: Implications for impact effects on the H chondrite asteroid

Miller Range 07273 is a chondritic melt breccia that contains clasts of equilibrated ordinary chondrite set in a fine‐grained (<5 μm), largely crystalline, igneous matrix. Data indicate that MIL was derived from the H chondrite parent asteroid, although it has an oxygen isotope composition that approaches but falls outside of the established H group. MIL also is distinctive in having low porosity, cone‐like shapes for coarse metal grains, unusual internal textures and compositions for coarse metal, a matrix composed chiefly of clinoenstatite and omphacitic pigeonite, and troilite veining most common in coarse olivine and orthopyroxene. These features can be explained by a model involving impact into a porous target that produced brief but intense heating at high pressure, a sudden pressure drop, and a slower drop in temperature. Olivine and orthopyroxene in chondrule clasts were the least melted and the most deformed, whereas matrix and troilite melted completely and crystallized to nearly strain‐free minerals. Coarse metal was largely but incompletely liquefied, and matrix silicates formed by the breakdown during melting of albitic feldspar and some olivine to form pyroxene at high pressure (>3 GPa, possibly to ~15–19 GPa) and temperature (>1350 °C, possibly to ≥2000 °C). The higher pressures and temperatures would have involved back‐reaction of high‐pressure polymorphs to pyroxene and olivine upon cooling. Silicates outside of melt matrix have compositions that were relatively unchanged owing to brief heating duration.     

Petrogenesis and shock metamorphism of the enriched lherzolitic shergottite Northwest Africa 7755

Northwest Africa (NWA) 7755 is a newly found enriched lherzolitic shergottite. Here, we report its detailed petrography and mineralogy. NWA 7755 contains both poikilitic and non‐poikilitic lithologies. Olivine has different compositional ranges in the poikilitic and non‐poikilitic lithologies, Fa_30–39 and Fa_37–40, respectively. Pyroxene in the non‐poikilitic lithology is systematically Fe‐richer than that in the poikilitic lithology. The chromite grains in non‐poikilitic lithology are highly Ti‐richer than those in the poikilitic lithology. The chemical variations of olivine, pyroxene, and chromite between the poikilitic and non‐poikilitic lithologies support a two‐stage formation model of lherzolitic shergottites. Besides planar fractures and strong mosaicism in olivine and pyroxene, shock‐induced melt veins and pockets are observed in NWA 7755. Olivine grains within and adjacent to melt veins and/or pockets have either transformed to ringwoodite, amorphous phase, or dissociated to bridgmanite plus magnesiowüstite. Merrillite in melt veins has completely transformed to tuite; however, apatite only has partially transformed to tuite, indicating a relatively sluggish transformation rate. The partial transformation from apatite to tuite resulted in fractional devolatilization of Cl and F in apatite. The fine‐grained mineral assemblage in melt veins consists mainly of bridgmanite, minor magnesiowüstite, Fe‐sulfide, Fe‐phosphide, and Ca‐phosphate minerals. The coexistence of bridgmanite and magnesiowüstite in these veins indicates a shock pressure of >~24 GPa and a temperature of 1800–2000 °C. Coesite and seifertite are probably present in NWA 7755. The presence of these high‐pressure minerals indicates that NWA 7755 has experienced a more intense shock metamorphism than other enriched lherzolitic shergottites.     

Complex origins of silicate veinlets in HED meteorites: A case study of Northwest Africa 1109

We report on the petrography and mineralogy of three types of silicate veinlets in the brecciated eucrite Northwest Africa (NWA) 1109. These include Fe‐rich olivine, Mg‐rich olivine, and pyroxene veinlets. The Fe‐rich olivine veinlets mainly infill fractures in pyroxene and also occur along grain boundaries between pyroxene and plagioclase crystals, in both nonequilibrated and equilibrated lithic clasts. The host pyroxene of Fe‐rich olivine veinlets shows large chemical variations between and within grains. The Fe‐rich olivine veinlets also contain fine‐grained Fe³⁺‐bearing chromite, highly calcic plagioclase, merrillite, apatite, and troilite. Based on texture and mineral chemistry, we argue that the formation of Fe‐rich olivine was related to fluid deposition at relatively high temperatures. However, the source of Fe‐rich olivine in the veinlets remains unclear. Magnesium‐rich olivine veinlets were found in three diogenitic lithic clasts. In one of these, the Mg‐rich olivine veinlets only occur in one of the fine‐grained interstitial regions and extend into fractures within surrounding coarse‐grained orthopyroxene. Based on the texture of the interstitial materials, we suggest that the Mg‐rich olivine veinlets formed by shock‐induced localized melting and recrystallization. Pyroxene veinlets were only observed in one clast where they infill fractures within large plagioclase grains and are associated with fine‐grained pyroxene surrounding coarse‐grained pyroxene. The large chemical variations in pyroxene and the fracture‐filling texture indicate that the pyroxene veinlets might also have formed by shock‐induced localized melting and rapid crystallization. Our study demonstrates that silicate veinlets formed by a range of different surface processes on the surface of Vesta.     

Incremental melting in the ureilite parent body: Initial composition,melting temperatures,and melt compositions

Ureilites are carbon‐rich ultramafic achondrites that have been heated above the silicate solidus, do not contain plagioclase, and represent the melting residues of an unknown planetesimal (i.e., the ureilite parent body, UPB). Melting residues identical to pigeonite‐olivine ureilites (representing 80% of ureilites) have been produced in batch melting experiments of chondritic materials not depleted in alkali elements relative to the Sun’s photosphere (e.g., CI, H, LL chondrites), but only in a relatively narrow range of temperature (1120 ºC–1180 ºC). However, many ureilites are thought to have formed at higher temperature (1200 ºC–1280 ºC). New experiments, described in this study, show that pigeonite can persist at higher temperature (up to 1280 ºC) when CI and LL chondrites are melted incrementally and while partial melts are progressively extracted. The melt productivity decreases dramatically after the exhaustion of plagioclase with only 5–9 wt% melt being generated between 1120 ºC and 1280 ºC. The relative proportion of pyroxene and olivine in experiments is compared to 12 ureilites, analyzed for this study, together with ureilites described in the literature to constrain the initial Mg/Si ratio of the UPB (0.98–1.05). Experiments are also used to develop a new thermometer based on the partitioning of Cr between olivine and low‐Ca pyroxene that is applicable to all ureilites. The equilibration temperature of ureilites increases with decreasing Al₂O₃ and Wo contents of pyroxene and decreasing bulk REE concentrations. The UPB melted incrementally, at different fO₂, and did not cool significantly (0 ºC–30 ºC) prior to its disruption. It remained isotopically heterogenous, but the initial concentration of major elements (SiO₂, MgO, CaO, Al₂O₃, alkali elements) was similar in the different mantle reservoirs.     

Shock and annealing in the amphibole‐ and mica‐bearing R chondrites

MIL 11207 (R6) and LAP 04840 (R6) contain hornblende and phlogopite; MIL 07440 (R6) contains accessory titan‐phlogopite and no hornblende. All three meteorites have been shocked: MIL 11207 contains extensive sulfide veins, pyroxene that formed from dehydrated hornblende, and an extensive network of plagioclase glass; MIL 07440 contains chromite‐plagioclase assemblages, chromite veinlets and blebs, pincer‐shaped plagioclase patches, but no sulfide veins; LAP 04840 contains olivine grains with chromite‐bleb‐laden cores and opaque‐free rims, rare grains of pyroxene that formed from dehydrated hornblende, and no sulfide veins. These meteorites appear to have been heated to maximum temperatures of approximately 700–900 °C under conditions of moderately high PH₂O (perhaps 250–500 bars). All three samples underwent postshock annealing. During this process, olivine crystal lattices healed (giving the rocks the appearance of shock‐stage S1), and diffusion of Fe and S from thin sulfide veins to coarse sulfide grains caused the veins to disappear in MIL 07440 and LAP 04840. This latter process apparently also occurred in most S1–S2 ordinary chondrites of high petrologic type. The pressure–temperature conditions responsible for forming the amphibole and mica in these rocks may have been present at depths of a few tens of kilometers (as suggested in the literature). A giant impact or a series of smaller impacts would then have been required to excavate the hornblende‐ and biotite‐bearing rocks and bring them closer to the surface. It was in that latter location where the samples were shocked, deposited in a hot ejecta blanket of low thermal diffusivity, and annealed.     

Northwest Africa 4797: A strongly shocked ultramafic poikilitic shergottite related to compositionally intermediate Martian meteorites

Abstract– Northwest Africa (NWA) 4797 is an ultramafic Martian meteorite composed of olivine (40.3 vol%), pigeonite (22.2%), augite (11.9%), plagioclase (9.1%), vesicles (1.6%), and a shock vein (10.3%). Minor phases include chromite (3.4%), merrillite (0.8%), and magmatic inclusions (0.4%). Olivine and pyroxene compositions range from Fo_66–72,En_58–74Fs_19–28Wo_6–15, and En_46–60Fs_14–22Wo_34–40, respectively. The rock is texturally similar to “lherzolitic” shergottites. The oxygen fugacity was QFM?2.9 near the liquidus, increasing to QFM?1.7 as crystallization proceeded. Shock effects in olivine and pyroxene include strong mosaicism, grain boundary melting, local recrystallization, and pervasive fracturing. Shock heating has completely melted and vesiculated igneous plagioclase, which upon cooling has quench‐crystallized plagioclase microlites in glass. A mm‐size shock melt vein transects the rock, containing phosphoran olivine (Fo_69–79), pyroxene (En_44–51Fs_14–18Wo_30–42), and chromite in a groundmass of alkali‐rich glass containing iron sulfide spheres. Trace element analysis reveals that (1) REE in plagioclase and the shock melt vein mimics the whole rock pattern; and (2) the reconstructed NWA 4797 whole rock is slightly enriched in LREE relative to other intermediate ultramafic shergottites, attributable to local mobilization of melt by shock. The shock melt vein represents bulk melting of NWA 4797 injected during pressure release. Calculated oxygen fugacity for NWA 4797 indicates that oxygen fugacity is decoupled from incompatible element concentrations. This is attributed to subsolidus re‐equilibration. We propose an alternative nomenclature for “lherzolitic” shergottites that removes genetic connotations. NWA 4797 is classified as an ultramafic poikilitic shergottite with intermediate trace element characteristics.     

Mineralogy,petrology, chronology,and exposure history of the Chelyabinsk meteorite and parent body

Three masses of the Chelyabinsk meteorite have been studied with a wide range of analytical techniques to understand the mineralogical variation and thermal history of the Chelyabinsk parent body. The samples exhibit little to no postentry oxidation via Mössbauer and Raman spectroscopy indicating their fresh character, but despite the rapid collection and care of handling some low levels of terrestrial contamination did nonetheless result. Detailed studies show three distinct lithologies, indicative of a genomict breccia. A light‐colored lithology is LL5 material that has experienced thermal metamorphism and subsequent shock at levels near S4. The second lithology is a shock‐darkened LL5 material in which the darkening is caused by melt and metal‐troilite veins along grain boundaries. The third lithology is an impact melt breccia that formed at high temperatures (~1600 °C), and it experienced rapid cooling and degassing of S₂ gas. Portions of light and dark lithologies from Chel‐101, and the impact melt breccias (Chel‐102 and Chel‐103) were prepared and analyzed for Rb‐Sr, Sm‐Nd, and Ar‐Ar dating. When combined with results from other studies and chronometers, at least eight impact events (e.g., ~4.53 Ga, ~4.45 Ga, ~3.73 Ga, ~2.81 Ga, ~1.46 Ga, ~852 Ma, ~312 Ma, and ~27 Ma) are clearly identified for Chelyabinsk, indicating a complex history of impacts and heating events. Finally, noble gases yield young cosmic ray exposure ages, near 1 Ma. These young ages, together with the absence of measurable cosmogenic derived Sm and Cr, indicate that Chelyabinsk may have been derived from a recent breakup event on an NEO of LL chondrite composition.     

High‐pressure phases in shock‐induced melt of the unique highly shocked LL6 chondrite Northwest Africa 757

Northwest Africa 757 is unique in the LL chondrite group because of its abundant shock‐induced melt and high‐pressure minerals. Olivine fragments entrained in the melt transform partially and completely into ringwoodite. Plagioclase and Ca‐phosphate transform to maskelynite, lingunite, and tuite. Two distinct shock‐melt crystallization assemblages were studied by FIB‐TEM analysis. The first melt assemblage, which includes majoritic garnet, ringwoodite plus magnetite‐magnesiowüstite, crystallized at pressures of 20–25 GPa. The other melt assemblage, which consists of clinopyroxene and wadsleyite, solidified at ~15 GPa, suggesting a second veining event under lower pressure conditions. These shock features are similar to those in S6 L chondrites and indicate that NWA 757 experienced an intense impact event, comparable to the impact event that disrupted the L chondrite parent body at 470 Ma.     

Spade: An H chondrite impact‐melt breccia that experienced post‐shock annealing

Abstract— The low modal abundances of relict chondrules (1.8 vol%) and of coarse (i.e., ≥200 μm‐size) isolated mafic silicate grains (1.8 vol%) in Spade relative to mean H6 chondrites (11.4 and 9.8 vol%, respectively) show Spade to be a rock that has experienced a significant degree of melting. Various petrographic features (e.g., chromite‐plagioclase assemblages, chromite veinlets, silicate darkening) indicate that melting was caused by shock. Plagioclase was melted during the shock event and flowed so that it partially to completely surrounded nearby mafic silicate grains. During crystallization, plagioclase developed igneous zoning. Low‐Ca pyroxene that crystallized from the melt (or equilibrated with the melt at high temperatures) acquired relatively high amounts of CaO. Metallic Fe‐Ni cooled rapidly below the Fe‐Ni solvus and transformed into martensite. Subsequent reheating of the rock caused transformation of martensite into abundant duplex plessite. Ambiguities exist in the shock stage assignment of Spade. The extensive silicate darkening, the occurrence of chromite‐plagioclase assemblages, and the impact‐melted characteristics of Spade are consistent with shock stage S6. Low shock (stage S2) is indicated by the undulose extinction and lack of planar fractures in olivine. This suggests that Spade reached a maximum prior shock level equivalent to stage S6 and then experienced post‐shock annealing (probably to stage S1). These events were followed by a less intense impact that produced the undulose extinction in the olivine, characteristic of shock stage S2. Annealing could have occurred if Spade were emplaced near impact melts beneath the crater floor or deposited in close proximity to hot debris within an ejecta blanket. Spade firmly establishes the case for post‐shock annealing. This may have been a common process on OC asteroids.     

Estimating shock pressures based on high‐pressure minerals in shock‐induced melt veins of L chondrites

Abstract— Here we report the transmission electron microscopy (TEM) observations of the mineral assemblages and textures in shock‐induced melt veins from seven L chondrites of shock stages ranging from S3 to S6. The mineral assemblages combined with phase equilibrium data are used to constrain the crystallization pressures, which can be used to constrain shock pressure in some cases. Thick melt veins in the Tenham L6 chondrite contain majorite and magnesiowüstite in the center, and ringwoodite, akimotoite, vitrified silicate‐perovskite, and majorite in the edge of the vein, indicating crystallization pressure of ?25 GPa. However, very thin melt veins (5–30 μm wide) in Tenham contain glass, olivine, clinopyroxene, and ringwoodite, suggesting crystallization during transient low‐pressure excursions as the shock pressure equilibrated to a continuum level. Melt veins of Umbarger include ringwoodite, akimotoite, and clinopyroxene in the vein matrix, and Fe₂SiO₄‐spinel and stishovite in SiO₂‐FeO‐rich melt, indicating a crystallization pressure of ?18 GPa. The silicate melt veins in Roy contain majorite plus ringwoodite, indicating pressure of ?20 GPa. Melt veins of Ramsdorf and Nakhon Pathon contain olivine and clinoenstatite, indicating pressure of less than 15 GPa. Melt veins of Kunashak and La Lande include albite and olivine, indicating crystallization at less than 2.5 GPa. Based upon the assemblages observed, crystallization of shock veins can occur before, during, or after pressure release. When the assemblage consists of high‐pressure minerals and that assemblage is constant across a larger melt vein or pocket, the crystallization pressure represents the equilibrium shock pressure.     

Localized shock melting in lherzolitic shergottite Northwest Africa 1950: Comparison with Allan Hills 77005

Abstract— The lherzolitic Martian meteorite Northwest Africa (NWA) 1950 consists of two distinct zones: 1) low‐Ca pyroxene poikilically enclosing cumulate olivine (Fo_70–75) and chromite, and 2) areas interstitial to the oikocrysts comprised of maskelynite, low‐ and high‐Ca pyroxene, cumulate olivine (Fo_68–71) and chromite. Shock metamorphic effects, most likely associated with ejection from the Martian subsurface by large‐scale impact, include mechanical deformation of host rock olivine and pyroxene, transformation of plagioclase to maskelynite, and localized melting (pockets and veins). These shock effects indicate that NWA 1950 experienced an equilibration shock pressure of 35–45 GPa. Large (millimeter‐size) melt pockets have crystallized magnesian olivine (Fo_78–87) and chromite, embedded in an Fe‐rich, Al‐poor basaltic to picro‐basaltic glass. Within the melt pockets strong thermal gradients (minimum 1 °C/μm) existed at the onset of crystallization, giving rise to a heterogeneous distribution of nucleation sites, resulting in gradational textures of olivine and chromite. Dendritic and skeletal olivine, crystallized in the melt pocket center, has a nucleation density (1.0 × 10³ crystals/mm²) that is two orders of magnitude lower than olivine euhedra near the melt margin (1.6 × 10⁵ crystals/mm²). Based on petrography and minor element abundances, melt pocket formation occurred by in situ melting of host rock constituents by shock, as opposed to melt injected into the lherzolitic target. Despite a common origin, NWA 1950 is shocked to a lesser extent compared to Allan Hills (ALH) 77005 (45–55 GPa). Assuming ejection in a single shock event by spallation, this places NWA 1950 near to ALH 77005, but at a shallower depth within the Martian subsurface. Extensive shock melt networks, the interconnectivity between melt pockets, and the ubiquitous presence of highly vesiculated plagioclase glass in ALH 77005 suggests that this meteorite may be transitional between discreet shock melting and bulk rock melting.     

Magombedze: A new H-chondrite with light-dark structure

Abstract— Magombedze is a light-dark structured H-chondrite breccia that fell in Zimbabwe on 1990 July 2 at 15:30 GMT. White clasts are moderately shocked and have equilibrated mafic silicates (pyroxene Fs_16–18, olivine Fa_18–19) together with clear optically-recognizable plagioclase of variable composition (An_9–13 found); chondrules are distinct but contain no trace of preserved glass. The darker surrounding material contains a higher proportion of fine-grained metal and sulfide than the white clasts, and many of its constituent grains show little evidence of shock. Mafic silicates in the dark lithology are distinctly less-equilibrated (pyroxene Fs_5–21, olivine Fa_11–20) than those in the white clasts, and many chondrules preserve brown devitrified glass; some metamorphic plagioclase of variable composition (An_11–22, found) is present. Some monoclinic pyroxene occurs in both fractions, but it is relatively common in the dark fraction. The white clasts are classified as H5, and the enclosing dark material is H3–5.     

Intermineral oxygen three‐isotope systematics of silicate minerals in equilibrated ordinary chondrites

High‐precision oxygen three‐isotope ratios were measured for four mineral phases (olivine, low‐Ca and high‐Ca pyroxene, and plagioclase) in equilibrated ordinary chondrites (EOCs) using a secondary ion mass spectrometer. Eleven EOCs were studied that cover all groups (H, L, LL) and petrologic types (4, 5, 6), including S1–S4 shock stages, as well as unbrecciated and brecciated meteorites. SIMS analyses of multiple minerals were made in close proximity (mostly <100 μm) from several areas in each meteorite thin section, to evaluate isotope exchange among minerals. Oxygen isotope ratios in each mineral become more homogenized as petrologic type increases with the notable exception of brecciated samples. In type 4 chondrites, oxygen isotope ratios of olivine and low‐Ca pyroxene are heterogeneous in both δ¹⁸O and Δ¹⁷O, showing similar systematics to those in type 3 chondrites. In type 5 and 6 chondrites, oxygen isotope ratios of the four mineral phases plot along mass‐dependent fractionation lines that are consistent with the bulk average Δ¹⁷O of each chondrite group. The δ¹⁸O of three minerals, low‐Ca and high‐Ca pyroxene and plagioclase, are consistent with equilibrium fractionation at temperatures of 700–1000 °C. In most cases the δ¹⁸O values of olivine are higher than those expected from pyroxene and plagioclase, suggesting partial retention of premetamorphic values due to slower oxygen isotope diffusion in olivine than pyroxene during thermal metamorphism in ordinary chondrite parent bodies.     

Effects of space weathering on diagnostic spectral features: Results from He+ irradiation experiments

We performed ion irradiation of mineral samples with 50 keV He⁺, aimed to investigate ion irradiation effects on diagnostic spectral features. Reflectance spectra of samples in 0.375–2.5 μm are measured before and after ion irradiation. Silicates, including Luobusha olivine, plagioclase and basaltic glass, have shown reddening and darkening of reflectance spectra at the VIS–NIR range. Olivine is more sensitive to ion irradiation than plagioclase and basaltic glass. Irradiated Panzhihua ilmenite exhibits higher reflectance and stronger absorption features, which is totally different from lunar soil and analog silicate materials in other experiments. Using continuum removal and MGM fit, we extracted and compared absorption features of olivine spectra before and after irradiation. Ion irradiation can induce band strength decrease of olivine but negligible band centers shift. We estimate band centers shift caused by ion irradiation are quite limited, even less than variations due to chemical composition in silicates. It provides one possible explanation for no systematic shift in band positions in lunar soil. Irradiated Luobusha olivine spectrum matches spectra of olivine-dominated asteroids. Our results suggest space weathering should be new clues to explain the subtle difference between A-type asteroid spectra and laboratory spectra of olivine.     

Petrology,mineralogy, porosity,and cosmic‐ray exposure history of Huaxi ordinary chondrite

A meteorite fall was heard and collected on July 13, 2010 at about 18:00 (local time) in the Shibanjing village of the Huaxi district of Guiyang, Guizhou province, China. The total mass of the fall is estimated to be at least 1.6 kg; some fragments are missing. The meteorite consists mainly of olivine, low‐Ca pyroxene, high‐Ca pyroxene, plagioclase, kamacite, taenite, and troilite. Minor phases include chromite and apatite. Various textural types of chondrules exist in this meteorite: most chondrule textures can be easily defined. The grain sizes of secondary plagioclase in this meteorite range from 2 to 50 μm. The chemical composition of olivine and low‐Ca pyroxene are uniform; Fa in olivine and Fs in low‐Ca pyroxene are, respectively, 19.6 ± 0.2 and 17.0 ± 0.3 (mole%). Huaxi has been classified as an H5 ordinary chondrite, with a shock grade S2, and weathering W0. The weak shock features, rare fractures, and the high porosity (17.6%) indicates that Huaxi is a less compacted meteorite. The preatmospheric radius of Huaxi is ~11 cm, corresponding to ~21 kg. The meteorite experienced a relatively short cosmic‐ray exposure of about 1.6 ± 0.1 Ma. The ⁴He and ⁴⁰Ar retention ages are older than 4.6 Ga implying that Huaxi did not degas after thermal metamorphism on its parent body.