Non-spherical lobate chondrules in CO3.0 Y-81020: General implications for the formation of low-FeO porphyritic chondrules in CO chondrites

Non-spherical chondrules (arbitrarily defined as having aspect ratios ≥1.20) in CO3.0 chondrites comprise multi-lobate, distended, and highly irregular objects with rounded margins; they constitute ∼70% of the type-I (low-FeO) porphyritic chondrules in Y-81020, ∼75% of such chondrules in ALHA77307, and ∼60% of those in Colony. Although the proportion of non-spherical type-I chondrules in LL3.0 Semarkona is comparable (∼60%), multi-lobate OC porphyritic chondrules (with lobe heights equivalent to a significant fraction of the mean chondrule diameter) are rare. If the non-spherical type-I chondrules in CO chondrites had formed from totally molten droplets, calculations indicate that they would have collapsed into spheres within ∼10⁻³ s, too little time for their 20-μm-size olivine phenocrysts to have grown from the melt. These olivine grains must therefore be relicts from an earlier chondrule generation; the final heating episode experienced by the non-spherical chondrules involved only minor amounts of melting and crystallization. The immediate precursors of the individual non-spherical chondrules may have been irregularly shaped chondrule fragments whose fracture surfaces were rounded during melting. Because non-spherical chondrules and “circular” chondrules form a continuum in shape and have similar grain sizes, mineral and mesostasis compositions, and modal abundances of non-opaque phases, they must have formed by related processes. We conclude that a large majority of low-FeO chondrules in CO3 chondrites experienced a late, low-degree melting event. Previous studies have shown that essentially all type-II (high-FeO) porphyritic chondrules in Y-81020 formed by repeated episodes of low-degree melting. It thus appears that the type-I and type-II porphyritic chondrules in Y-81020 (and, presumably, all CO3 chondrites) experienced analogous formation histories. Because these two types constitute ∼95% of all CO chondrules, it is clear that chondrule recycling was the rule in the CO chondrule-formation region and that most melting events produced only low degrees of melting. The rarity of significantly non-spherical, multi-lobate chondrules in Semarkona may reflect more-intense heating of chondrule precursors in the ordinary-chondrite region of the solar nebula.     

Fine,nickel-poor Fe-Ni grains in the olivine of unequilibrated ordinary chondrites

Fine (?2 μm), Ni-poor (? 10 mg/g) Fe-Ni grains are common inclusions in the olivine in porphyritic chondrules in unequilibrated ordinary chondrites. The olivine grains appear to be relicts that survived chondrule formation without melting. The most common occurrence of this “dusty” metal is in the core of olivine grains having clear Fe-poor rims and surrounded either by small euhedral clear olivine grains zoned with FeO increasing toward the border of the grains or by large elongated Fe-poor orthopyroxenes oriented parallel to the chondrule surface and enclosing small round olivine grains. Various amounts of Ca, Al-rich glass are always present. The dusty metal is occasionally found in the rims of olivine grains either isolated in the matrix or included in chondrules. A rare occurrence is as bands in highly deformed olivines.This dusty metal appears to be the product of in situ reduction of FeO from the host olivine. Among the possible reductants H₂ or carbonaceous matter (CH₂)_n seem the most likely. Hydrogen may have been implanted by solar-wind or solar-flare irradiation, but this requires that dissipation of nebular gas occurred before the end of the chondrule formation process. Carbonaceous matter may have been implanted by shock. Less likely reductants are nebular CO or C dissolved in the olivine lattice. The large relict olivine grains may be nebular condensates or, more likely, fragments broken off earlier generations of chondrules.     

Oxygen-isotopic compositions of relict and host grains in chondrules in the Yamato 81020 CO3.0 chondrite

We report the oxygen-isotope compositions of relict and host olivine grains in six high-FeO porphyritic olivine chondrules in one of the most primitive carbonaceous chondrites, CO3.0 Yamato 81020. Because the relict grains predate the host phenocrysts, microscale in situ analyses of O-isotope compositions can help assess the degree of heterogeneity among chondrule precursors and constrain the nebular processes that caused these isotopic differences. In five of six chondrules studied, the Δ¹⁷O (=δ¹⁷O −0.52 · δ¹⁸O) compositions of host phenocrysts are higher than those in low-FeO relict grains; the one exception is for a chondrule with a moderately high-FeO relict. Both the fayalite compositions as well as the O-isotope data support the view that the low-FeO relict grains formed in a previous generation of low-FeO porphyritic chondrules that were subsequently fragmented. It appears that most low-FeO porphyritic chondrules formed earlier than most high-FeO porphyritic chondrules, although there were probably some low-FeO chondrules that formed during the period when most high-FeO chondrules were forming.     

On the nature and origin of isolated olivine grains in carbonaceous chondrites

Many carbonaceous chondrites contain discrete olivine fragments that have been considered to be primitive material, i.e. direct condensates from the solar nebula or pre-solar system material. Olivine occurring in chondrules and as isolated grains in C3(0) chondrites has been characterized chemically and petrographically. Type I chondrules contain homogeneous forsterite grains that exhibit a negative correlation between FeO and CaO. Type II chondrules contain zoned fayalite olivines in which FeO is positively correlated with CaO and MnO. The isolated olivines in C3(0) chondrites form two compositional populations identical to olivines in the two types of porphyritic olivine chondrules in the same meteorites. Isolated olivines contain trapped melt inclusions similar in composition to glassy mesostasis between olivines in chondrules. Such glasses can be produced by fractional crystallization of olivine and minor spinel in the parent chondrule melts if plagioclase does not nucleate. The isolated olivine grains are apparently clastic fragments of chondrules. Some similarities between olivines in C3(0), C2, and Cl chondrites may suggest that olivine grains in all these meteorites crystallized from chondrule melts.     

Relict olivine grains, chondrule recycling, and implications for the chemical, thermal, and mechanical processing of nebular materials

Chondrules and isolated forsterites in five low-subtype ordinary chondrites [NWA 3127 (LL3.1), Sahara 97210 (LL3.2), Wells (LL3.3), Chainpur (LL3.4), and Sahara 98175 (LL3.5)] were studied using petrographic, EMPA, and SIMS techniques to better constrain the origin of chondrules and the olivine grains within them. Our results imply that igneous crystallization, vapor fractionation, redox effects, and open-system behavior were important processes. All olivine grains, including normal, relict, and isolated forsterite grains, show evidence for igneous fractionation under disequilibrium conditions, with olivine crystallizing during rapid cooling (closer to 2000 °C/h than to 100 °C/h). Vapor fractionation is manifested by anti-correlated abundances between refractory elements (Al, Sc, Y, Ti, Ca, V) and volatile elements (Cr, Mn, P, Rb, Fe) in olivine. Redox effects are evidenced in various ways, and imply that Fe, Co, Ni, and P were partitioned more into metal, and V was partitioned more into olivine, under reducing conditions in the most FeO-poor melts. There is no obvious evidence for systematic variations in olivine composition according to meteorite subtype, but shock melting in Sahara 97210 resulted in the injection of glass-derived melt into olivine, resulting in artificially high abundances of Ba, Sr, Na, Ti, and some other incompatible elements in olivine. Terrestrial weathering in a hot desert environment may have mobilized Ba and Sr in some glasses.Our data suggest that chondrules in ordinary chondrites experienced repeated thermal, chemical, and mechanical processing during a “recycling” process over an extended time period, which involved multiple episodes of melting under fluctuating redox and heating conditions, and multiple episodes of chondrule break-up in some cases. Forsterite grains, including normal grains in forsterite-bearing type I chondrules, the cores of isolated forsterites, and relict forsterite in type II chondrules, all crystallized from similar, refractory melts under reducing conditions; relict Mg-olivine and isolated forsterite grains were thus derived from type I chondrules. Olivine in type II chondrules, including normal grains and ferroan overgrowths on relict Mg-olivine, crystallized from more volatile-rich, oxidized, and relatively unfractionated melts. Relict dusty olivine grains in type I chondrules were derived from type II chondrules during incomplete melting episodes involving reduction and some vaporization, with clear (non-dusty) grains in dusty olivine-bearing chondrules crystallizing from the reduced and partly vaporized melts. Melt compositions parental to normal olivine grains in type I and II chondrules are systematically enriched in refractory elements compared to bulk chondrule compositions, implying that chondrules often experienced open-system exchange with more volatile-rich surroundings after some olivine had crystallized, possibly while the chondrules were still partly molten. Type II chondrules could have been derived from type I chondrules by the addition of relatively volatile-rich material, followed by re-melting and little evaporation under oxidizing conditions. In contrast, type I chondrules could have been derived from type II chondrules by re-melting involving more-or-less evaporation under reducing conditions. Chemical, oxygen isotope, and petrographic data are best accommodated by a model in which there were several (>2-3, sometimes ?4-5) melting episodes for most chondrules in ordinary chondrites.     

Chondrule reheating experiments and relict olivine

Chondrules contain foreign objects, including some olivine grains that obviously did not crystallize from their silicate melt. The term recycling is usually applied to chondrules with relict grains, implying that the precursor contained relicts of a previous generation of chondrules. This has given rise to the idea that the pervasive melt droplet formation that affected the early solar system involved repeated events in which chondrules or chondrule debris were reheated. We conducted experiments in which synthetic chondrules generated from fine-grained mineral aggregates were heated and cooled a second time to see what the textural consequences of this reheating would be. Charges were heated to peak temperatures for 1 min and were cooled to near-solidus temperatures over 35 min, for both thermal cycles. We first made microporphyritic olivine charges and on reheating and second cooling observed coarser grain sizes and disappearance of relict grains, if the second peak temperature was the same as or higher than the first (but insufficient for destroying all nuclei). The coarsening was due to the dissolution of the smallest first generation crystals and additional growth on the relicts during cooling. Reheated barred olivine spheres generated barred olivine spheres again, no matter how low the peak temperature. This is because the number of remaining olivine grains or nuclei that acted as sites for regrowth was constant. Generating the observed distribution of chondrule textures, dominantly porphyritic, directly from a fine-grained precursor such as nebular or presolar condensates is impossible with a single event. With reheating of chondrules, generating the texture distribution is possible provided that subsequent heating events have higher peak temperatures than the first, so that total dissolution of the smallest grains occurs, with consequent coarsening. For our thermal history and a reasonable distribution of peak temperatures, multiple recycling events might be needed to make most chondrules porphyritic. Alternatively, the predominance of porphyritic textures in chondrules could be explained by heating times hours long for a fine-grained precursor or by heating of a coarse-grained precursor.The presence of relict grains derived from older chondrules or other material suggests that an aggregate has been heated for the first time, because recycling brings an approach to equilibrium. There appears to be no reliable way to use textures to tell just how many chondrules have been heated more than once. The relict grains simply indicate the nature of the precursors, which were at least in part derived from earlier chondrules, and of the peak temperatures too low for total melting and heating times too short for total dissolution. Rim thicknesses on relict grains depend on number density of crystals and melt composition, and are not a reliable guide to the chondrule cooling rate.     

Physical properties of chondrules in different chondrite groups: Implications for multiple melting events in dusty environments

Chondrite groups (CV, CK, CR) with large average chondrule sizes have low proportions of RP plus C chondrules, high proportions of enveloping compound chondrules, high proportions of chondrules with (thick) igneous rims, and relatively low proportions of type-I chondrules containing sulfide. In contrast, chondrite groups (CM, CO, OC, R, EH, EL) with smaller average chondrule sizes have the opposite properties. Equilibrated CK chondrites have plagioclase with relatively low Na; equilibrated OC, R, EH and EL chondrites have more sodic plagioclase. Enveloping compound chondrules and chondrules with igneous rims formed during a remelting event after the primary chondrule was incorporated into a dustball. Repeated episodes of remelting after chondrules were surrounded by dust would tend to produce large chondrules. RP and C chondrules formed by complete melting of their precursor assemblages; remelting of RP and C chondrules surrounded by dust would tend to produce porphyritic chondrules as small dust particles mixed with the melt, providing nuclei for crystallizing phenocrysts. This process would tend to diminish the numbers of RP and C chondrules. Correlations among these chondrule physical properties suggest that chondrite groups with large chondrules were typically surrounded by thick dust-rich mantles that formed in locally dusty nebular environments. Chondrules that were surrounded by thick dust mantles tended to cool more slowly because heat could not quickly radiate away. Slow cooling led to enhanced migration of sulfide to chondrule surfaces and more extensive sulfide evaporation. These chondrules also lost Na; the plagioclase that formed from equilibrated CK chondrites was thus depleted in Na.     

Microchondrule-bearing clast in the Piancaldoli LL3 meteorite: a new kind of type 3 chondrite and its relevance to the history of chondrules

In the Piancaldoli LL3 chondrite, we found a mm-sized clast containing ~100 chondrules 0.2–64 μm in apparent diameter (much smaller than any previously reported) that are all of the same textural type (radial pyroxene; FS_1–17). This clast, like other type 3 chondrites, has a fine-grained Ferich opaque silicate matrix, sharply defined chondrules, abundant low-Ca clinopyroxene and minor troilite and Si- and Cr-bearing metallic Fe,Ni. However, the very high modal matrix abundance (63 ± 8 vol. %), unique characteristics of the chondrules, and absence of microscopically-observable olivine indicate that the clast is a new kind of type 3 chondrite. Most chondrules have FeO-rich edges, and chondrule size is inversely correlated with chondrule-core FeO concentration (the first reported correlation of chondrule size and composition). Chondrules acquired Fe by diffusion from Fe-rich matrix material during mild metamorphism, possibly before final consolidation of the rock. Microchondrules (those chondrules ? 100 μm in diameter) are also abundant in another new kind of type 3 chondrite clast in the Rio Negro L chondrite regolith breccia. In other type 3 chondrite groups, microchondrule abundance appears to be anticorrelated with mean chondrule size, viz. 0.02–0.04 vol. % in H and CO chondrites and ?0.006 vol. % in L, LL, and CV chondrites.Microchondrules probably formed by the same process that formed normal-sized droplet chondrules: melting of pre-existing dustballs. Because most compound chondrules in the clast and other type 3 chondrites formed by collisions between chondrules of the same textural type, we suggest that dust grains were mineralogically sorted in the nebula before aggregating into dustballs. The sizes of compound chondrules and chondrule craters, which resulted from collisions of similarly-sized chondrules while they were plastic, indicate that size-sorting (of dustballs) occurred before chondrule formation, probably by aerodynamic processes in the nebula. We predict that other kinds of type 3 chondrites exist which contain chondrule abundances, size-ranges and proportions of textural types different from known chondrite groups.     

Chondrules in the CB/CH-like carbonaceous chondrite Isheyevo: Evidence for various chondrule-forming mechanisms and multiple chondrule generations

The recently discovered metal-rich carbonaceous chondrite Isheyevo consists of Fe, Ni-metal grains, chondrules, heavily hydrated matrix lumps and rare refractory inclusions. It contains several lithologies with mineralogical characteristics intermediate between the CH and CB carbonaceous chondrites; the contacts between the lithologies are often gradual. Here we report the mineralogy and petrography of chondrules in the metal-rich (70 vol%) and metal-poor (20 vol%) lithologies. The chondrules show large variations in textures [cryptocrystalline, skeletal olivine, barred olivine, porphyritic olivine, porphyritic olivine-pyroxene, porphyritic pyroxene], mineralogy and bulk chemistry (magnesian, ferrous, aluminum-rich, silica-rich). The porphyritic magnesian (Type I) and ferrous (Type II) chondrules, as well as silica- and Al-rich plagioclase-bearing chondrules are texturally and mineralogically similar to those in other chondrite groups and probably formed by melting of mineralogically diverse precursor materials. We note, however, that in contrast to porphyritic chondrules in other chondrite groups, those in Isheyevo show little evidence for multiple melting events; e.g., relict grains are rare and igneous rims or independent compound chondrules have not been found. The magnesian cryptocrystalline and skeletal olivine chondrules are chemically and mineralogically similar to those in the CH and CB carbonaceous chondrites Hammadah al Hamra 237, Queen Alexandra Range 94411 (QUE94411) and MacAlpine Hills 02675 (MAC02675), possibly indicating a common origin from a vapor–melt plume produced by a giant impact between planetary embryos; the interchondrule metal grains, many of which are chemically zoned, probably formed during the same event. The magnesian cryptocrystalline chondrules have olivine–pyroxene normative compositions and are generally highly depleted in Ca, Al, Ti, Mn and Na; they occasionally occur inside chemically zoned Fe, Ni-metal grains. The skeletal olivine chondrules consist of skeletal forsteritic olivine grains overgrown by Al-rich (up to 20 wt% Al₂O₃) low-Ca and high-Ca pyroxene, and interstitial anorthite-rich mesostasis. Since chondrules with such characteristics are absent in ordinary, enstatite and other carbonaceous chondrite groups, the impact-related chondrule-forming mechanism could be unique for the CH and CB chondrites. We conclude that Isheyevo and probably other CH chondrites contain chondrules of several generations, which may have formed at different times, places and by different mechanisms, and subsequently accreted together with the heavily hydrated matrix lumps and refractory inclusions into a CH parent body. Short-lived isotope chronology, oxygen isotope and trace element studies of the Isheyevo chondrules can provide a possible test of this hypothesis.     

Coarse-grained chondrule rims in type 3 chondrites

Relatively coarse-grained rims occur around all types of chondrules in type 3 carbonaceous and ordinary chondrites. Those in H-L-LL3 chondrites are composed primarily of olivine and low-Ca pyroxene; those in CV3 chondrites contain much less low-Ca pyroxene. Average grain sizes range from ～4 μm in H-L-LL3 chondrites to ～10 μm in CV3 chondrites. Such rims surround ～50%, ～10% and ≤ 1% of chondrules in CV3, H-L-LL3 and CO3 chondrites, respectively, but are rare (≤1%) around CV3 Ca,Al-rich inclusions. Rim thicknesses average ～150 μm in H-L-LL3 chondrites and ～400 μm in CV3 chondrites.The rims in H-L-LL3 chondrites are composed of material very similar to that which comprises darkzoned chondrules and recrysiallized matrix. Dark-zoned chondrules and coarse-grained rims probably formed in the solar nebula from clumps of opaque matrix material heated to sub-solidus to sub-liquidus temperatures during chondrule formation. Mechanisms capable of completely melting some material while only sintering other material require steep thermal gradients; suitable processes are lightning, reconnecting magnetic field lines and, possibly, aerodynamic drag heating.CV chondrites may have formed in a region where the chondrule formation mechanism was less efficient, probably at greater solar distances than the ordinary chondrites. The lesser efficiency of heating could be responsible for the greater abundance of coarse-grained rims around CV chondrules. Alternatively, CV chondrules may have suffered fewer particle collisions prior to agglomeration.     

Spinel group minerals in LL3.00-6 chondrites: Indicators of nebular and parent body processes

We carried out a systematic study of spinel group minerals in LL3.00-3.9 and LL4-6 chondrites. With increasing petrologic type, the size and abundance of spinel increase. The compositions of spinel group minerals in type 3 chondrites depend on the occurrence; Mg-Al-rich spinel occurs mainly in chondrules. Some chromite occurs in chondrules and matrix, and nearly pure chromite is exclusively encountered in the matrix. The occurrence of nearly pure chromite and the wide compositional variations distinguish spinel group minerals in types 3.00-3.3 from those in the other types. Spinel group minerals in types 3.5-3.9 show a narrower range of compositions, and those in types 4-6 are homogeneous. The changes in composition and abundance of spinel in type 3 chondrites are most likely due to thermal metamorphism. Therefore, the chemistry of spinel group minerals could be used as a sensitive indicator of metamorphic conditions, not only for type 3-6, but also 3.00-3.9. They can be applied to identify the most primitive (least metamorphosed) chondrites. The bulk compositions of spinel-bearing chondrules and the textural setting of the spinel indicate that most spinel group minerals crystallized directly from chondrule melts. However, some spinel grains, especially those enclosed in olivine phenocrysts, can not be explained by in situ crystallization in the chondrule. We interpret these spinel grains to be relic phases that survived chondrule melting. This is supported by the oxygen isotopic composition of a spinel grain, which has significantly lighter oxygen than the coexisting olivine. The oxygen isotopic composition of this spinel is similar to those of Al-rich chondrules. Our discovery of relic spinel in chondrules is an indication of the complexities in the early solar nebular processes that ranged from formation of refractory inclusion, through Al-rich chondrule, to ferromagnesian chondrules, and attests to the recycling of earlier formed materials into the precursors of later formed materials. The characteristic features of spinel group minerals are not only sensitive to thermal metamorphism, but also shed light on chondrule formation processes.     

Heating duration of igneous rim formation on a chondrule in the Northwest Africa 3118 CV3oxA carbonaceous chondrite inferred from micro-scale migration of the oxygen isotopes

Due to their common occurrence in various types of chondrites, igneous rims formed on pre-existing chondrules throughout chondrule-forming regions of the solar nebula. Although the peak temperatures are thought to reach similar values to those achieved during chondrule formation events, the heating duration in chondrule rim formation has not been well defined. We determined the two-dimensional chemical and oxygen isotopic distributions in an igneous rim of a chondrule within the Northwest Africa 3118 CV3_oxA chondrite with sub-micrometer resolution using secondary ion mass spectrometry and scanning electron microscopy. The igneous rim experienced aqueous alteration on the CV parent body. The aqueous alteration resulted in precipitation of the secondary FeO-rich olivine (Fa_40–49) and slightly disturbed the Fe-Mg distribution in the MgO-rich olivine phenocrysts (Fa_11–22) at about a 1 μm scale. However, no oxygen isotopic disturbances were observed at a scale greater than 100 nm. The MgO-rich olivine, a primary phase of igneous rim formation, has δ¹⁷O = −6 ± 3‰ and δ¹⁸O = −1 ± 4‰, and some grains contain extreme ¹⁶O-rich areas (δ¹⁷O, δ¹⁸O = ∼−30‰) nearly 10 μm across. We detected oxygen isotopic migration of approximately 1 μm at the boundaries of the extreme ¹⁶O-rich areas. Using oxygen self-diffusivity in olivine, the heating time of the igneous rim formation could have continued from several hours to several days at near liquidus temperatures (∼2000 K) in the solar nebula suggesting that the rim formed by a similar flash heating event that formed the chondrules.     

Trace element composition of silicate minerals in the porphyritic and nonporphyritic chondrules of Elenovka (L5) and Knyahinya (L/Ll5) meteorites

The results of SIMS and EPMA studies on the silicate minerals and bulk compositions (SEM-EDS) of porphyritic and nonporphyritic chondrules from Elenovka and Knyahinya meteorites are reported. The trace element composition of silicate minerals (olivine, low-Са pyroxene) in equilibrated ordinary chondrites (EOC) has not been affected considerably by thermal metamorphism on the chondritic parent bodies. Therefore, equilibrated chondrites can be used for chondrule-forming processes studies. Low-Са pyroxene in nonporphyritic chondrules contains higher REE, Ba, Sr concentrations than that in porphyritic chondrules at similar trace element concentrations in the olivine of chondrules. The data obtained indicate that the formation of non-porphyritic chondrules was triggered by an increase in the cooling rate of chondrules upon the formation of pyroxene, rather than a difference in the initial conditions of chondrule formation. Higher refractory incompatible element (Nb, LREE) concentrations in the olivine of chondrules than those in the olivine of the matrix and contrasting trace element (Zr, Sr, Cr, REE) concentrations in the low-Са pyroxene of the chondrules and the matrix suggest that the matrix and chondrules of the meteorites formed in one reservoir under different physico-chemical conditions (density, redox state, rotation speed, homogeneity, temperature, shocks, electrical discharge, etc.).     

Formation processes of compound chondrules in CV3 carbonaceous chondrites: Constraints from oxygen isotope ratios and major element concentrations

We found thirty compound chondrules in two CV3 carbonaceous chondrites. The abundance in each meteorite relative to single chondrules is 29/1846 (1.6%) in Allende and 1/230 (0.4%) in Axtell. We examined petrologic features, major element concentrations and oxygen isotopic compositions. Textural, compositional and isotopic evidence suggests that multiple, different mechanisms are responsible for the formation of compound chondrules.Seven compound chondrules are composed of two conjoined porphyritic chondrules with a blurred boundary. At the boundary region of this type of compounds, a poikilitic texture is commonly observed. This suggests that the two chondrules were melted when they came to be in contact. On the other hand, seventeen compound chondrules consist of two conjoined chondrules with a discrete boundary. The preservation of spherical boundary planes of an earlier-formed chondrule of this type implies that it already solidified before fusing with a later-formed chondrule that was still melted. Six samples out of 17 compound chondrules of this type are composed of two BO chondrules. The BO-BO compound chondrules have a unique textural feature in common: the directions of the barred olivines are mostly parallel between two chondrules. This cannot be explained by a simple collision process and forces another mechanism to be taken into consideration.The remaining six compound chondrules differ from the others; they consist of an earlier-formed chondrule enclosed by a later-formed chondrule. A large FeO enrichment was observed in the later-formed chondrules and the enrichment was much greater than that in the later-formed chondrules of other types of compounds. This is consistent with the relict chondrule model, which envisages that the later-formed chondrule was made by a flash melting of a porous FeO-rich dust clump on an earlier-formed chondrule. The textural evidence of this type of compound shows that the earlier-formed chondrule has melted again to varying degrees at the second heating event. This implies that FeO concentrations in bulk chondrules increases during the second heating event if an earlier-formed chondrule was totally melted together with the FeO-rich dust aggregates.Silicate minerals such as olivine and low-Ca pyroxene in compound chondrules have oxygen isotope compositions similar to those in single chondrules from CV3 chondrites. The oxygen isotope composition of each part of the compound chondrule is basically similar to their chondrule pair, but silicates in some chondrules show varying degrees of ¹⁶O-enrichment down to −15‰ in δ¹⁸O, while those in their partners have ¹⁶O-poor invariable compositions near 0 ‰ in δ¹⁸O. This implies that the two chondrules in individual compounds formed in the same environments before they became conjoined and the heterogeneous oxygen isotope compositions in some chondrules resulted from incomplete exchange of oxygen atoms between ¹⁶O-rich chondrule melts and ¹⁶O-poor nebular gas.     

Oxygen isotope systematics of chondrules in the Allende CV3 chondrite: High precision ion microprobe studies

The oxygen three-isotope systematics of 36 chondrules from the Allende CV3 chondrite are reported using high precision secondary ion mass spectrometer (CAMECA IMS-1280). Twenty-six chondrules have shown internally homogenous Δ¹⁷O values among olivine, pyroxene, and spinel within a single chondrule. The average Δ¹⁷O values of 19 FeO-poor chondrules (13 porphyritic chondrules, 2 barred olivine chondrules, and 4 chondrule fragments) show a peak at −5.3 ± 0.6‰ (2SD). Another 5 porphyritic chondrules including both FeO-poor and FeO-rich ones show average Δ¹⁷O values between −3‰ and −2‰, and 2 other FeO-poor barred olivine chondrules show average Δ¹⁷O values of −3.6‰ and 0‰. These results are similar to those for Acfer 094 chondrules, showing bimodal Δ¹⁷O values at −5‰ and −2‰. Nine porphyritic chondrules contain olivine grains with heterogeneous Δ¹⁷O values as low as −18‰, indicating that they are relict olivine grains and some of them were derived from precursors related to refractory inclusions. However, most relict olivine grains show oxygen isotope ratios that overlap with those in homogeneous chondrules. The Δ¹⁷O values of four barred olivine chondrules range from −5‰ to 0‰, indicating that not all BO chondrules plot near the terrestrial fractionation line as suggested by previous bulk chondrule analyses. Based on these data, we suggest the presence of multiple oxygen isotope reservoirs in local dust-rich protoplanetary disk, from which the CV3 parent asteroid formed.A compilation of 225 olivine and low-Ca pyroxene isotopic data from 36 chondrules analyzed in the present study lie between carbonaceous chondrite anhydrous mineral (CCAM) and Young and Russell lines. These data define a correlation line of δ¹⁷O = (0.982 ± 0.019) × δ¹⁸O − (2.91 ± 0.10), which is similar to those defined by chondrules in CV3 chondrites and Acfer 094 in previous studies. Plagioclase analyses in two chondrules plot slightly below the CCAM line with Δ¹⁷O values of −2.6‰, which might be the result of oxygen isotope exchange between chondrule mesostasis and aqueous fluid in the CV parent body.     

吉林陨石中橄榄石和辉石的化学成份特征兼谈平衡球粒陨石中的不平衡性

吉林陨石中的球粒分为正常快速冷却和过冷冷却球粒两种。前一类球粒中的橄榄石和辉石的化学成份相对稳定,代表了平衡球粒陨石的特征。后一类球粒中的橄榄石和辉石不仅在总的化学成份上有别于前者,而且矿物本身成份不稳定,反映了平衡球粒陨石中存在着不平衡性。     

Granoblastic olivine aggregates as precursors of Type I chondrules: An experimental test

Chondrule formation models involving precursors of granoblastic olivine aggregates (GOA) of either planetesimal or nebular origin have recently been proposed. We have therefore conducted chondrule simulation experiments using mixtures of 100 h-thermally annealed GOA and An + En to test the viability of GOA as predecessors of porphyritic olivine (PO) chondrules. Isothermal runs of less than 5 min at 1350–1550 °C result in GOA disaggregation and Fe–Mg exchange; runs of 0.5–4 h show textures superficially similar to granular and PO chondrules, but with reversely zoned olivine. Charges isothermally heated at 1550 °C for 1 and 4 h before being cooled at 10 and 100 °C/h undergo olivine crystallization and yield classical PO textures. Although most evidence of origin from GOA is erased, the cores of normally zoned euhedral crystals are relict. As ‘phenocrysts’ in Type I chondrules can be relict such chondrules could have experienced similar peak temperatures to those of Type II chondrules.Chondrules containing GOA with olivine triple junctions resemble experimental charges heated for minutes at temperatures between 1350 and 1450 °C and Type I chondrules with subhedral to anhedral olivine plus GOA relicts resemble charges heated at the same temperatures but for longer duration. Type I chondrules with a mass of granular olivine or irregular, anhedral olivine grains in the center, and much glass nearer the margin, on the other hand, require limited heating at high temperature (1550 °C) while Type I chondrules with euhedral olivines, resemble charges heated at 1550 °C for 4 h. The majority of Type I chondrules in CV chondrites display evidence of derivation from GOA. Many finer-grained chondrules in CR and UOC on the other hand, could not have been derived from such coarse-grained precursors, but could have formed from fine-grained dustballs as stipulated in the standard paradigm. Thus, both GOA and dustballs represent viable chondrule precursors of coarser and finer-grained Type I PO chondrules, respectively.     

Chondrules in H3 chondrites: textures,compositions and origins

Major and minor element bulk compositions of 90 individual chondrules and 16 compound chondrule sets in unequilibrated (type 3) H-group chondrites were determined in polished thin sections by broad beam electron probe analysis and the chondrules were classified petrographically into six textural types (barred olivine, porphyritic olivine, porphyritic pyroxene, barred pyroxene, radiating pyroxene, fine-grained). Although analyses of individual chondrules scatter widely, the mean composition of each textural type (except barred pyroxene) is rather distinct, as verified by discriminant function analysis. Al₂O₃, TiO₂ and Na₃O are correlated in chondrules, but Al₂O₃ and CaO do not correlate. Compound chondrule sets were found to consist almost entirely of chondrules or partial chondrules of similar texture and composition.The data suggest that composition played a conspicuous role in producing the observed textures of chondrules, though other factors such as cooling rates and degrees of supercooling prior to nucleation were also important. If compound chondrules formed and joined when they were still molten or plastic, then the data suggest that chondrules of each textural type could have formed together in space or time. The correlation of Al₂O₃ and TiO₂ with Na₂O and not with CaO appears to rule out formation of chondrules by direct equilibrium condensation from the nebula. We conclude that the most reasonable model for formation of the majority of chondrules is that they originated from mixtures of differing fractions of high-, intermediate- and low-temperature nebular condensates that underwent melting in space. A small percentage of chondrules might have formed by impacts in meteorite parent-body regoliths.     

High precision SIMS oxygen three isotope study of chondrules in LL3 chondrites: Role of ambient gas during chondrule formation

We report high precision SIMS oxygen three isotope analyses of 36 chondrules from some of the least equilibrated LL3 chondrites, and find systematic variations in oxygen isotope ratios with chondrule types. FeO-poor (type I) chondrules generally plot along a mass dependent fractionation line (Δ¹⁷O ∼ 0.7‰), with δ¹⁸O values lower in olivine-rich (IA) than pyroxene-rich (IB) chondrules. Data from FeO-rich (type II) chondrules show a limited range of δ¹⁸O and δ¹⁷O values at δ¹⁸O = 4.5‰, δ¹⁷O = 2.9‰, and Δ¹⁷O = 0.5‰, which is slightly ¹⁶O-enriched relative to bulk LL chondrites (Δ¹⁷O ∼ 1.3‰). Data from four chondrules show ¹⁶O-rich oxygen isotope ratios that plot near the CCAM (Carbonaceous Chondrite Anhydrous Mineral) line. Glass analyses in selected chondrules are systematically higher than co-existing minerals in both δ¹⁸O and Δ¹⁷O values, whereas high-Ca pyroxene data in the same chondrule are similar to those in olivine and pyroxene phenocrysts.Our results suggest that the LL chondrite chondrule-forming region contained two kinds of solid precursors, (1) ¹⁶O-poor precursors with Δ¹⁷O > 1.6‰ and (2) ¹⁶O-rich solid precursors derived from the same oxygen isotope reservoir as carbonaceous chondrites. Oxygen isotopes exhibited open system behavior during chondrule formation, and the interaction between the solid and ambient gas might occur as described in the following model. Significant evaporation and recondensation of solid precursors caused a large mass-dependent fractionation due to either kinetic or equilibrium isotope exchange between gas and solid to form type IA chondrules with higher bulk Mg/Si ratios. Type II chondrules formed under elevated dust/gas ratios and with water ice in the precursors, in which the ambient H₂O gas homogenized chondrule melts by isotope exchange. Low temperature oxygen isotope exchange may have occurred between chondrule glasses and aqueous fluids with high Δ¹⁷O (∼5‰) in LL the parent body. According to our model, oxygen isotope ratios of chondrules were strongly influenced by the local solid precursors in the proto-planetary disk and the ambient gas during chondrule melting events.     

Petrology and oxygen isotope compositions of chondrules in E3 chondrites

Chondrules in E3 chondrites differ from those in other chondrite groups. Many contain near-pure endmember enstatite (Fs_<1). Some contain Si-bearing FeNi metal, Cr-bearing troilite, and, in some cases Mg, Mn- and Ca-sulfides. Olivine and more FeO-rich pyroxene grains are present but much less common than in ordinary or carbonaceous chondrite chondrules. In some cases, the FeO-rich grains contain dusty inclusions of metal. The oxygen three-isotope ratios (δ¹⁸O, δ¹⁷O) of olivine and pyroxene in chondrules from E3 chondrites, which are measured using a multi-collection SIMS, show a wide range of values. Most enstatite data plots on the terrestrial fractionation (TF) line near whole rock values and some plot near the ordinary chondrite region on the 3-isotope diagram. Pyroxene with higher FeO contents (∼2-10 wt.% FeO) generally plots on the TF line similar to enstatite, suggesting it formed locally in the EC (enstatite chondrite) region and that oxidation/reduction conditions varied within the E3 chondrite chondrule-forming region. Olivine shows a wide range of correlated δ¹⁸O and δ¹⁷O values and data from two olivine-bearing chondrules form a slope ∼1 mixing line, which is approximately parallel to but distinct from the CCAM (carbonaceous chondrite anhydrous mixing) line. We refer to this as the ECM (enstatite chondrite mixing) line but it also may coincide with a line defined by chondrules from Acfer 094 referred to as the PCM (Primitive Chondrite Mineral) line (Ushikubo et al., 2011). The range of O isotope compositions and mixing behavior in E3 chondrules is similar to that in O and C chondrite groups, indicating similar chondrule-forming processes, solid-gas mixing and possibly similar ¹⁶O-rich precursors solids. However, E3 chondrules formed in a distinct oxygen reservoir.Internal oxygen isotope heterogeneity was found among minerals from some of the chondrules in E3 chondrites suggesting incomplete melting of the chondrules, survival of minerals from previous generations of chondrules, and chondrule recycling. Olivine, possibly a relict grain, in one chondrule has an R chondrite-like oxygen isotope composition and may indicate limited mixing of materials from other reservoirs. Calcium-aluminum-rich inclusions (CAIs) in E3 chondrites have petrologic characteristics and oxygen isotope ratios similar to those in other chondrite groups. However, chondrules from E3 chondrites differ markedly from those in other chondrite groups. From this we conclude that chondrule formation was a local event but CAIs may have all formed in one distinct place and time and were later redistributed to the various chondrule-forming and parent body accretion regions. This also implies that transport mechanisms were less active at the time of and following chondrule formation.