Geochemistry and mineral chemistry of lode gold mineralisation, SE Egypt: implications for ore genesis and exploration

Orogenic, lode gold mineralisation in the South Eastern Desert of Egypt is related to quartz veins spatially and temporally associated with conjugate NW- and NE-trending brittle–ductile shear zones. These structures are assumed to be linked to a regional transpression deformation which occurred late in the tectonic evolution of the area. In the Betam deposit, gold is confined to quartz(±carbonate) veins cutting through tectonised metagabbro and metasedimentary rocks in the vicinity of small granite intrusions. The ore bodies contain ubiquitous pyrite and arsenopyrite, in addition to minor disseminated chalcopyrite, pyrrhotite, galena, tetrahedrite and rare gold/electrum. New ore microscopy and electron microprobe studies indicate that most free-milling Au is intimately associated with the late-paragenetic galena–tetrahedrite–chalcopyrite assemblage. An early Fe–As sulphide assemblage, however, shows minor traces of refractory gold. New mineralogical and geochemical data are used to better constrain on possible element dispersions for exploration uses. This study indicates that parameters that most consistently define primary dispersion of gold in the mine area include pervasive silicification, sericite and carbonate alteration. The trace element data of gold lodes reflect a systematic dispersion of gold and certain base metals. Low-cost, extensive exploration programs may use elevated concentrations of Ag, Sb, Cu and Pb as tracers for Au ore zones in the Betam mine area and surroundings.     

Geochronology of Gold Deposits and Its Implication for Metallogenesis in the Fengxian-Lixian Area, Qinling Orogenic Belt, China

Abstract: A series of super large‐scale and large‐scale Pb and Zn, and Au deposits are distributed in the Qinling orogenic belt, China. Gold deposits were generally ascribed to Carlin‐type originated from circular meteoric water. Visible and coarse‐grained gold (up to over 3mm in grain size) was recently identified in some gold deposits in the Fengxian‐Lixian area, Qinling. Au‐bearing quartz lodes related to magmatism were discovered in the Xiaogouli gold deposit. Two types of Au‐bearing quartz veins, i.e., NW‐trending quartz veins and NE‐trending quartz veins cutting strata are widely present in the Baguamiao gold deposit. Both are spatially associated with each other. The former is generally snake–like, S‐shape or zigzag, which was resulted from plastic deformation by ductile shearing, being generally cut by the latter. The latter is generally linear with widely developed bleaching alteration zones in its adjacent wall rocks, which symbolizes the superimposition of brittle deformation and filling and metasomatism of magmatic hydrothermal solution in ductile shear zones after uplifting of the shear zones near the surface. The NW‐trending quartz veins contain Au of lower than 3ppm. The NE‐trending quartz veins contain Au of more than 3 ppm, so that NE‐trending quartz veins and the adjoining altered rocks are important ores. The NW‐trending Au–bearing quartz vein was dated as 210.61.26 to 232.581.59 Ma by ⁴⁰Ar–³⁹Ar method, i.e., late Indosinian epoch (Triassic). The NE‐trending Au–bearing quartz vein was dated as 131.910.89 to 197.451.13 Ma by ⁴⁰Ar–³⁹Ar method, i.e., Yanshanian epoch (Jurassic). The ⁴⁰Ar–³⁹Ar age of the NW‐trending Au–bearing quartz veins represents the age of the ductile shear formation. The isotope data of the NE‐trending quartz veins indicate that gold mineralization was closely related to Indosinian and Yanshanian granite intrusives not only in time and space, but also in origin.     

Silver-rich telluride mineralization at Mount Charlotte and Au–Ag zonation in the giant Golden Mile deposit,Kalgoorlie, Western Australia

The gold deposits at Kalgoorlie in the 2.7-Ga Eastern Goldfields Province of the Yilgarn Craton, Western Australia, occur adjacent to the D2 Golden Mile Fault over a strike of 8 km within a district-scale zone marked by porphyry dykes and chloritic alteration. The late Golden Pike Fault separates the older (D2) shear zone system of the Golden Mile (1,500 t Au) in the southeast from the younger (D4) quartz vein stockworks at Mt Charlotte (126 t Au) in the northwest. Both deposits occur in the Golden Mile Dolerite sill and display inner sericite–ankerite alteration and early-stage gold–pyrite mineralization replacing the wall rocks. Late-stage tellurides account for 20 % of the total gold in the first, but for <1 % in the second deposit. In the Golden Mile, the main telluride assemblage is coloradoite?+?native gold (898–972 fine)?+?calaverite?+?petzite?±?krennerite. Telluride-rich ore (>30 g/t Au) is characterized by Au/Ag?=?2.54 and As/Sb?=?2.6–30, the latter ratio caused by arsenical pyrite. Golden Mile-type D2 lodes occur northwest of the Golden Pike Fault, but the Hidden Secret orebody, the only telluride bonanza mined (10,815 t at 44 g/t Au), was unusually rich in silver (Au/Ag?=?0.12–0.35) due to abundant hessite. We describe another array of silver-rich D2 shear zones which are part of the Golden Mile Fault exposed on the Mt Charlotte mine 22 level. They are filled with crack-seal and pinch-and-swell quartz–carbonate veins and are surrounded by early-stage pyrite?+?pyrrhotite disseminated in a sericite–ankerite zone more than 6 m wide. Gold grade (0.5–0.8 g/t) varies little across the zone, but Au/Ag (0.37–2.40) and As/Sb (1.54–13.9) increase away from the veins. Late-stage telluride mineralization (23 g/t Au) sampled in one vein has a much lower Au/Ag (0.13) and As/Sb (0.48) and comprises scheelite, pyrite, native gold (830–854 fine), hessite, and minor pyrrhotite, altaite, bournonite, and boulangerite. Assuming 250–300 °C, gold–hessite compositions indicate a fluid log f _Te2 of ?11.5 to ?10, values well below the stability of calaverite. The absence of calaverite and the dominance of hessite in the D2 lodes of the Mt Charlotte area point to a kilometer-scale mineral and Au/Ag zonation along the Golden Mile master fault, which is attributed to a lateral decrease in peak tellurium fugacity of the late-stage hydrothermal fluid. The As/Sb ratio may be similarly zoned to lower values at the periphery. The D4 gold–quartz veins constituting the Mt Charlotte orebodies represent a younger hydrothermal system, which did not contribute to metal zonation in the older one.     

Role of fluid mixing and wallrock sulfidation in gold mineralization at the Semna mine area,central Eastern Desert of Egypt: Evidence from hydrothermal alteration,fluid inclusions and stable isotope data

The Semna gold deposit is one of several vein-type gold occurrences in the central Eastern Desert of Egypt, where gold-bearing quartz veins are confined to shear zones close to the boundaries of small granitoid stocks. The Semna gold deposit is related to a series of sub-parallel quartz veins along steeply dipping WNW-trending shear zones, which cut through tectonized metagabbro and granodiorite rocks. The orebodies exhibit a complex structure of massive and brecciated quartz consistent with a change of the paleostress field from tensional to simple shear regimes along the pre-existing fault segments. Textural, structural and mineralogical evidence, including open space structures, quartz stockwork and alteration assemblages, constrain on vein development during an active fault system. The ore mineral assemblage includes pyrite, chalcopyrite, subordinate arsenopyrite, galena, sphalerite and gold. Hydrothermal chlorite, carbonate, pyrite, chalcopyrite and kaolinite are dominant in the altered metaggabro; whereas, quartz, sericite, pyrite, kaolinite and alunite characterize the granodiorite rocks in the alteration zones. Mixtures of alunite, vuggy silica and disseminated sulfides occupy the interstitial open spaces, common at fracture intersections. Partial recrystallization has rendered the brecciation and open space textures suggesting that the auriferous quartz veins were formed at moderately shallow depths in the transition zone between mesothermal and epithermal veins.Petrographic and microthermometric studies aided recognition of CO₂-rich, H₂O-rich and mixed H₂O–CO₂ fluid inclusions in the gold-bearing quartz veins. The H₂O–CO₂ inclusions are dominant over the other two types and are characterized by variable vapor: liquid ratios. These inclusions are interpreted as products of partial mixing of two immiscible carbonic and aqueous fluids. The generally light δ³⁴S of pyrite and chalcopyrite may suggest a magmatic source of sulfur. Spread in the final homogenization temperatures and bulk inclusion densities are likely due to trapping under pressure fluctuation through repeated fracture opening and sealing. Conditions of gold deposition are estimated on basis of the fluid inclusions and sulfur isotope data as 226–267 °C and 350–1100 bar, under conditions transitional between mesothermal and epithermal systems.The Semna gold deposit can be attributed to interplay of protracted volcanic activity (Dokhan Volcanics?), fluid mixing, wallrock sulfidation and a structural setting favoring gold deposition. Gold was transported as Au-bisulfide complexes under weak acid conditions concomitant with quartz–sericite–pyrite alteration, and precipitated through a decrease in gold solubility due to fluid cooling, mixing with meteoric waters and variations in pH and fO₂.     

The Nassara gold prospect,Gaoua District,southwestern Burkina Faso

The Nassara-Au prospect is located in the Birimian Boromo Greenstone Belt in southwestern Burkina Faso. It is part of a larger mineralized field that includes the Cu–Au porphyry system of Gaoua, to the north. At Nassara, mineralization occurs within the West Batié Shear Zone that follows the contact between volcanic rocks (basalt and andesite) and volcano-sediments (pyroclastics and black shales) at the southern termination of the Boromo Belt. Gold is associated with pyrite and other Fe-bearing minerals that occur disseminated within the sheared volcanic and volcano-sedimentary rocks. In particular, highest grades are distinguished in alteration halos of small quartz–albite–ankerite veins that form networks along the shear zone. Here, pyrites are marked by As-poor and As-rich growth zones, the latter containing gold inclusions. Gold mineralization formed during D2_NA. Subsequent shear fractures related to D3_NA related are devoid of gold. Nassara is a classical orogenic gold occurrence where gold is associated to disseminated pyrite along quartz veins.     

Genesis of the hydrothermal gold deposits in the Canan area,Lepaguare District,Honduras

The Canan area (Honduras) is characterized by a gold-bearing ore deposit that is associated with quartz-veined shear zones. Gold mineralization occurs in low-to medium-grade metamorphic host-rocks (graphitic and sericitic schists). Hydrothermal fluids, which are associated with the emplacement of Cretaceous-Tertiary granodioritic intrusions, are responsible for the formation of quartz veins and the hydrothermal alteration of wall-rocks. Three main altered zones have been detected in the wall-rocks as far as 150 cm from the quartz veins. The distal zone (up to 50-cm thick) contains quartz, chlorite and illite. The intermediate zone is the thickest (up to 80 cm) and is marked by quartz, muscovite, sulphides, kaolinite and native elements such as Au and Ag. The proximal zone, which is close to the quartz veins, is rather thin (up to 25 cm) and contains clay minerals, Al-oxides-hydroxides and sulphides. The transition from the distal to the proximal zone is accompanied by the enrichment of SiO₂ and the depletion of all other major elements, except for Fe₂O_3(tot). Precious metals occur in the highest concentrations in the intermediate zone (Au up to 7.6 ppm and Ag up to 11 ppm). We suggest that gold was transported as a reduced sulphur complex and was precipitated from the hydrothermal solution by the reaction of the sulphur complexes with Fe²⁺ from the alteration of the mafic minerals of the host-rock. Fluid–wall-rock interactions seem to be the main cause of gold mineralization. Genetic relationships with a strike-slip fault system, hydrothermal alteration zones within the metamorphic wall-rocks, and an entire set of geochemical anomalies are consistent with orogenic-type gold deposits of the epizonal class.     

Two stages of gold mineralization at Hutti mine, India

The Hutti gold mine is located in a high-angle, NNW–SSE-trending shear zone system, which hosts nine discrete auriferous shear zones (reefs). On a clockwise, retrograde PT path two separate stages of deformation/metamorphism (D₂/M₂ and D₃/M₃) occurred synchronous with two distinct stages of gold mineralization, both of which were associated with different fluid types. Stage 1 mineralization developed during D₂/M₂, where the amphibolite host rocks were altered by a metamorphic fluid with a $ {{\delta }^{{18}}}{{O}_{{{{H}_2}O}}} $ of 7.5–10.1?‰, rich in K, S, As, and Au at pressure and temperature conditions of around 3 kbar and 530?+?20/?30°C, respectively. The stage 1 auriferous shear zones are enveloped by a zoned alteration consisting of a distal biotite–chlorite and proximal biotite–plagioclase assemblage. Subsequently, D₂/M₂ was overprinted by D₃/M₃ deformation and metamorphism at 300–400°C and <2 kbar that formed the stage 2 mineralization. The stage 2 mineralizing fluid which originated from outside the greenstone belt (δ¹⁸O_fluid of 3.2–6.8?‰) was rich in Si, Au, and W. This mineralization stage is distinct by the emplacement of laminated quartz veins central to the shear zone, containing locally visible gold at concentrations of up to 1 kg Au/t. The laminated quartz veins are surrounded by a millimeter-scale chlorite₂–K-feldspar alteration halo, which replaced the stage 1 biotite–plagioclase assemblage. The oxygen isotopic composition of the stage 2 fluid suggests a mixture of a magmatic fluid with an oxygen isotopic composition in the range of 6 to 10?‰ and an isotopically light formation fluid that resulted from fluid–rock interaction in the greenstone pile. The two fluid fluxes at stages 1 and 2 both contributed to the overall gold mineralization; however, it was the second fluid pulse, which gave the Hutti mine its status as the largest gold mine in India. The metamorphic evolution was thereby important for the first stage, whereas the second stage was controlled by tectonism and intrusion of the high-heat production Yellagatti granite that re-established the fluid plumbing and mineralizing system.     

Gold deposits associated with the gabbroic rocks at Tirek area,western Hoggar,Algeria: fluid inclusion study

The Tirek gold deposit hosted in the Archean shield is one of the richest sources of mined gold for Algeria. The deposit is controlled by the East Ouzzal shear zone (EOSZ), a transcurrent N–S lithospheric fault. The EOSZ is a late Pan-African dextral-ductile shear zone separating two contrasting Precambrian domains: the Archean In Ouzzal block to the west (Orthogenesis with subordinate metasediments reworked and granulitized during the ca. 2 Ga Eburnean event) and a middle Proterozoic block to the east involved in the ca. 600 Ma Pan-African event. The auriferous quartz veins are mainly oriented in two directions, N–S veins hosted in mylonitic rocks and NE–SW veins hosted in gabbroic or gneissic bands. The NE–SW veins contain the richest ore. Gold ore is found in a system of veins and lenticular quartz veinlets arranged in anastomosing networks. The hydrothermal alteration associated with these veins is characteristically a carbonate-sericite-albite-pyrite assemblage. Gold is the main metal of economic importance; it is disseminated in the quartz as grains or fibers along microcracks and as microscopic grains in the host rocks. Microthermometric results and Raman laser data from fluid inclusions demonstrate that the ore-forming fluids contained H₂O-CO₂±CH₄ and were low salinity. Homogenization temperatures are commonly 250–310 °C. In the Tirek deposit, the role of the shear zone that hosts the mineralization was to drain the hydrothermal fluid. Interactions between the fluid and the mafic host rocks and CO₂ also contributed to the formation of the hydrothermal gold deposit at Tirek.     

Au–Ag–Te Mineralization of the Low‐Sulfidation Epithermal Aginskoe Deposit,Central Kamchatka,Russia

Mineralogic studies of major ore minerals and fluid inclusion analysis in gangue quartz were carried out for the for the two largest veins, the Aginskoe and Surprise, in the Late Miocene Aginskoe Au–Ag–Te deposit in central Kamchatka, Russia. The veins consist of quartz–adularia–calcite gangue, which are hosted by Late Miocene andesitic and basaltic rocks of the Alnei Formation. The major ore minerals in these veins are native gold, altaite, petzite, hessite, calaverite, sphalerite, and chalcopyrite. Minor and trace minerals are pyrite, galena, and acanthine. Primary gold occurs as free grains, inclusions in sulfides, and constituent in tellurides. Secondary gold is present in form of native mustard gold that usually occur in Fe‐hydroxides and accumulates on the decomposed primary Au‐bearing tellurides such as calaverite, krennerite, and sylvanite. K–Ar dating on vein adularia yielded age of mineralization 7.1–6.9 Ma. Mineralization of the deposit is divided into barren massive quartz (stage I), Au–Ag–Te mineralization occurring in quartz‐adularia‐clays banded ore (Stage II), intensive brecciation (Stage III), post‐ore coarse amethyst (Stage IV), carbonate (Stage V), and supergene stages (Stage VI). In the supergene stage various secondary minerals, including rare bilibinskite, bogdanovite, bessmertnovite metallic alloys, secondary gold, and various oxides, formed under intensely oxidized conditions. Despite heavy oxidation of the ores in the deposit, Te and S fugacities are estimated as Stage II tellurides precipitated at the log f Te₂ values ?9 and at log fS₂ ?13 based on the chemical compositions of hypogene tellurides and sphalerite. Homogenization temperature of fluid inclusions in quartz broadly ranges from 200 to 300°C. Ore texture, fluid inclusions, gangue, and vein mineral assemblages indicate that the Aginskoe deposit is a low‐sulfidation (quartz–adularia–sericite) vein system.     

Transpressional imbricate thrust zones controlling gold mineralization in the Central Eastern Desert of Egypt

Strongly deformed volcaniclastic metasediments and ophiolitic slices hosting the Sukari gold mineralization display evidence of a complex structural evolution involving three main ductile deformational events (D₁–D₃). D₁ produced ENE-trending folds associated with NNW-propagating thrust slices and intrusion of the Sukari granite (689 ± 3 Ma). D₂ formed a moderately to steeply dipping, NNW-trending S₂ foliation curved to NE and developed arcuate structure constituting the Kurdeman shear zone (≤ 595 Ma) and East Sukari imbricate thrust belt. Major NE-trending F₂ folds, NW-dipping high-angle thrusts, shallow and steeply plunging mineral lineation and shear indicators recorded both subhorizontal and subvertical transport direction during D₂. D₃ (560–540 Ma) formed NNE-trending S₃ crenulation cleavage, tight F₃ folds, Sukari Thrust and West Sukari imbricate thrust. The system of NW-trending sinistral Kurdeman shear zone (lateral ramps and tear faults) and imbricate thrusts (frontal ramps) forming the actuate structure developed during SE-directed thrusting, whereas the prevailing pattern of NNE-trending dextral Sukari shear zone and imbricate thrusts forming Sukari thrust duplex developed during NE-directed tectonic shearing. Sukari granite intruded in different pluses between 689 and 540 Ma and associated with at least four phases of quartz veins with different geometry and orientation. Structural analysis of the shear fabrics indicates that the geometry of the mineralized quartz veins and alteration patterns are controlled by the regional NNW- and NE-trending conjugate zones of transpression. Gold-bearing quartz veins are located within NNW-oriented sinistral shear zones in Kurdeman gold mine area, within steeply dipping NW- and SE dipping thrusts and NE- and NS-oriented dextral and sinistral shear zones around Sukari mine area, and along E-dipping backthrusts and NW-SE and N-S fractures in Sukari granite. The high grade of gold mineralization in Sukari is mainly controlled by SE-dipping back-thrusts branched from the major NW-dipping Sukari Thrust. The gold mineralization in Sukari gold mine and neighboring areas in the Central Eastern Desert of Egypt is mainly controlled by the conjugate shear zones of the Najd Fault System and related to E-W directed shortening associated with oblique convergence between East and West Gondwana.     

Structural control of low-sulfidation epithermal gold mineralization in the Rosario–Bunawan district, East Mindanao Ridge, Philippines

The Rosario–Bunawan district is situated about 200 km north of Davao City, the capital of the Mindanao Island, Southern Philippines. Gold is produced from the Co-O mine, containing about 2,034,000 t of ore at 10.9 g/t Au, and in numerous small-scale operations by local miners. Epithermal gold mineralization in the Rosario–Bunawan district and the Co-O mine is confined to narrow (0.2–4 m) low-sulfidation quartz–chalcedony–calcite veins in volcanic and volcaniclastic wall rocks. Three major vein orientations are distinguished: (1) the NNW–SSE-trending set with a sinistral strike-slip sense of deformation (Philippine Fault trend); (2) the ENE–WSW-trending dextral strike-slip set (Palawan trend) and associated veins in the Riedel geometry; and (3) the WNW–ESE-trending conjugate set (Co-O trend). Three structural stages are defined: (1) extensional shear or shear veins formed in the Co-O, the Philippine Fault, and Palawan trends during regional NW–SE compression and near vertical vein opening (D₁); (2) reactivation of veins in the Philippine Fault, veins associated with the Palawan, and, to a lesser extent, the Co-O trends during E–W compression and near horizontal N–S-oriented vein opening (D₂). New D₂ extensional shear or shear veins formed in the Philippine Fault, and structures associated with the Palawan and associated Riedel trends; (3) the D₃-stage block faulting subsequently displaced all of the auriferous veins. The auriferous Rosario–Bunawan district is situated between two splays of the Philippine Fault, which acted as a lateral ramp system during the oblique convergence of the Philippine Sea plate and the Eurasian plate. The oblique convergence resulted in a change from a compressional (D₁) to a transpressional (D₂) regime, which was a prerequisite for the two-stage vein opening and hydrothermal mineralization, leading to an economic gold enrichment. D₁ compressional tectonics may have caused an elevated geothermal gradient in shallow crustal levels, forming the heat source for the fluid plumbing system, which is at variance to typical epithermal deposits formed in extensional zones. D₂ thrusting of a limestone nappe together with syn-tectonic diorite intrusions may have further increased the geothermal gradient, maintaining the fluid plumbing system. The limestone nappe may, at the same time, have represented an aquitard forcing the hydrothermal fluids into the volcanic and volcaniclastic wall rocks, which is regarded as critical for the two-stage gold mineralization in the Rosario–Bunawan district.     

Ore minerals and geochemical characterization of the Dungash gold deposit,South Eastern Desert,Egypt

The Dungash historic gold mine is located in the South Eastern Desert of Egypt. The gold-bearing quartz veins are hosted by the metavolcanic and metavolcaniclastic rocks along an ENE–WSW trending shear zone. Alteration types recorded in the wall rocks are sericitization, silicification, carbonatization, chloritization, sulfidization, ferruginization, and listwanitization. The ore mineral assemblage comprises arsenopyrite, pyrite, native gold, pyrrhotite, sphalerite, chalcopyrite, and galena. The primary sulfide mineral assemblage formed during a hypogene hydrothermal stage whereas anglesite and goethite occur as secondary supergene phases. Microthermometric fluid inclusion analysis revealed that the auriferous quartz precipitated from a moderately saline (5 to 11.22 wt% NaCl_equiv) solution at temperatures above the recorded homogenization temperatures (T _h), which range from 380 to 177 °C. The minimum pressures of trapping are between 350 and 400 bars. The fluid evolution during mineralization is explained by mixing of a magmatic fluid with meteoric waters. Initially, the high temperature and moderately saline magmatic fluid dominated and progressively became diluted with meteoric waters. Highest gold content is recorded in the carbonatized zone and the quartz veins. However, gold content in the carbonatized zone of the footwall exceeds several times its content in the quartz veins and the carbonatized zone of the hanging wall.     

Orogenic gold mineralisation hosted by Archaean basement rocks at Sortekap, Kangerlussuaq area, East Greenland

A gold-bearing quartz vein system has been identified in Archaean basement rocks at Sortekap in the Kangerlussuaq region of east Greenland, 35 km north–northeast of the Skaergaard Intrusion. This constitutes the first recorded occurrence of Au mineralisation in the metamorphic basement rocks of east Greenland. The mineralisation can be classified as orogenic style, quartz vein-hosted Au mineralisation. Two vein types have been identified based on their alteration styles and the presence of Au mineralisation. Mineralised type 1 veins occur within sheared supracrustal units and are hosted by garnet-bearing amphibolites, with associated felsic and ultramafic intrusions. Gold is present as native Au and Au-rich electrum together with arsenopyrite and minor pyrite and chalcopyrite in thin alteration selvages in the immediate wall rocks. The alteration assemblage of actinolite-clinozoisite-muscovite-titanite-scheelite-arsenopyrite-pyrite is considered to be a greenschist facies assemblage. The timing of mineralisation is therefore interpreted as being later and separate event to the peak amphibolite facies metamorphism of the host rocks. Type 2 quartz veins are barren of mineralisation, lack significant alteration of the wall rocks and are considered to be later stage. Fluid inclusion microthermometry of the quartz reveals three separate fluids, including a high temperature (T _h ?=?300–350 °C), H₂O–CO₂–CH₄ fluid present only in type 1 veins that in interpreted to be responsible for the main stage of Au deposition and sulphidic wall rock alteration. It is likely that the carbonic fluids were actually trapped at temperatures closer to 400 °C. Two other fluids were identified within both vein types, which comprise low temperature (100–200 °C) brines, with salinities of 13–25 wt%?eq. NaCl and at least one generation of low salinity aqueous fluids. The sources and timings of the secondary fluids are currently equivocal but they may be related to the emplacement of Paleogene mafic intrusions. The identification of this occurrence of orogenic-style Au mineralisation has implications for exploration in the underexplored area of east Greenland between 62 and 69°?N, where other, similar supracrustal units are known to be present.     

Dissolution channels in quartz and the role of pressure changes in gold and sulfide deposition in the Archean, greenstone-hosted, Hutti gold deposit, Karnataka, India

The pressure, temperature and composition of ore fluids that resulted in gold deposition in the Archean, greenstone-hosted Hutti deposit have been studied using fluid inclusions and the compositions of arsenopyrite and chlorite. Five types of fluids have been identified in fluid inclusions in quartz veins associated with mineralization. They are (1) monophase CO ₂-rich fluid; (2) low-salinity (0 to 14 wt% NaCl equivalent) and high-salinity (16 to 23 wt% NaCl equiv.) aqueous fluids; (3) high-salinity (28 to 40 wt% NaCl equiv.), polyphase aqueous fluids; (4) CO ₂–H ₂O–NaCl fluids of low salinity (0–8 wt% NaCl equiv.); and (5) a few carbonic inclusions with halite±nahcolite. The diversity of entrapped fluid composition is explained in terms of changes in fluid pressure and temperature which affect a more or less uniform supply of primary low-salinity CO ₂–H ₂O–NaCl fluid to the shear zone. Geothermobarometric studies indicate that during mineralization temperature ranged between 360 and 240 °C, and fluid pressure between 3,600 and 1,600 bar. The data are interpreted in terms of the cyclic fault-valve mechanism for active shear zones. Deposition of gold and sulfides has been studied on the basis of constraints from the composition of wall-rock chlorite, ore-mineral assemblages, and textural features. Tubular channels, 20 to 100 µm wide and up to 500 µm long that arise from fractures and C-planes in sheared quartz veins are reported for the first time. The channels have pyrrhotite, arsenopyrite, pyrite and gold at their distal ends, with calcite filling up the remaining part. These channels form in response to increases in T and P, by dissolution of quartz grains, guided by dislocations in them. At the P– T conditions of interest, gold and sulfide deposition takes place in the shears and fractures of quartz veins from CO ₂–H ₂O–NaCl ore fluid of low salinity and pH due to changes in phase compositions that occur during the process of shear failure of the enclosing rocks. In the wall rock where pH is buffered, gold deposition takes place from the predominant Au(HS) ₂ ^- species with progressive sulfide deposition and decrease in SS, from 0.01 to 0.001 mol/kg as T falls from 360 to 240 °C.     

Listvenite–lode association at the Barramiya gold mine,Eastern Desert,Egypt

Several occurrences of gold-bearing quartz veins are situated along the east–northeast-trending Barramiya–Um Salatit ophiolitic belt in the central Eastern Desert of Egypt. In the Barramiya mine, gold mineralization within carbonaceous, listvenized serpentinite and adjacent to post-tectonic granite stocks points toward a significant role of listvenitization in the ore genesis. The mineralization is related to quartz and quartz–carbonate lodes in silicified/carbonatized wallrocks. Ore minerals, disseminated in the quartz veins and adjacent wallrocks are mainly arsenopyrite, pyrite and trace amounts of chalcopyrite, sphalerite, tetrahedrite, pyrrhotite, galena, gersdorffite and gold. Partial to complete replacement of arsenopyrite by pyrite and/or marcasite is common. Other secondary phases include covellite and goethite. Native gold and gold–silver alloy occur as tiny grains along micro-fractures in the quartz veins. However, the bulk mineralization can be attributed to auriferous arsenopyrite and arsenic-bearing pyrite (with hundreds of ppms of refractory Au), as evident by electron microprobe and LA-ICP-MS analyses.The mineralized quartz veins are characterized by abundant carbonic (CO₂ ± CH₄ ± H₂O) and aqueous-carbonic (H₂O–NaCl–CO₂ ± CH₄) inclusions along intragranular trails, whereas aqueous inclusions (H₂O–NaCl ± CO₂) are common in secondary sites. Based on the fluid inclusions data combined with thermometry of the auriferous arsenopyrite, the pressure–temperature conditions of the Barramiya gold mineralization range from 1.3 to 2.4 kbar at 325–370 °C, consistent with mesothermal conditions. Based on the measured δ³⁴S values of pyrite and arsenopyrite intimately associated with gold, the calculated δ³⁴S_Σs values suggest that circulating magmatic, dilute aqueous-carbonic fluids leached gold and isotopically light sulfur from the ophiolitic sequence. As the ore fluids infiltrated into the sheared listvenite rocks, a sharp decrease in the fluid fO₂ via interaction with the carbonaceous wallrocks triggered gold deposition in structurally favorable sites.     

Relative timing of deformation and two-stage gold mineralization at the Hutti Mine, Dharwar Craton, India

Gold mineralization at Hutti is confined to a series of nine parallel, N–S to NNW–SSE trending, steeply dipping shear zones. The host rocks are amphibolites and meta-rhyolites metamorphosed at peak conditions of 660±40°C and 4±1 kbar. They are weakly foliated (S₁) and contain barren quartz extension veins. The auriferous shear zones (reefs) are typically characterized by four alteration assemblages and laminated quartz veins, which, in places, occupy the entire reef width of 2–10 m, and contain the bulk of gold mineralization. A <1.5 m wide distal chlorite-sericite (+biotite, calcite, plagioclase) alteration zone can be distinguished from a 3–5 m wide proximal biotite-plagioclase (+quartz, muscovite, calcite) alteration zone. Gold is both spatially and temporally associated with disseminated arsenopyrite and pyrite mineralization. An inner chlorite-K-feldspar (+quartz, calcite, scheelite, tourmaline, sphene, epidote, sericite) alteration halo, which rims the laminated quartz veins, is characterized by a pyrrhotite, chalcopyrite, sphalerite, ilmenite, rutile, and gold paragenesis. The distal chlorite-sericite and proximal biotite-plagioclase alteration assemblages are developed in microlithons of the S₂–S₃ crenulation cleavage and are replaced along S₃ by the inner chlorite-K-feldspar alteration, indicating a two-stage evolution for gold mineralization. Ductile D₂ shearing, alteration, and gold mineralization formed the reefs during retrograde evolution and fluid infiltration under upper greenschist to lower amphibolite facies conditions (560±60°C, 2±1 kbar). The reefs were reactivated in the D₃ dextral strike-slip to oblique-slip environment by fault-valve behavior at lower greenschist facies conditions (ca. 300–350°C), which formed the auriferous laminated quartz veins. Later D₄ crosscutting veins and D₅ faults overprint the gold mineralization. The alteration mineralogy and the structural control of the deposit clearly points to an orogenic style of gold mineralization, which took place either during isobaric cooling or at different levels of the Archean crust. From overlaps in the tectono-metamorphic history, it is concluded that gold mineralization occurred during two tectonic events, affecting the eastern Dharwar craton in south India between ca. 2550 – 2530 Ma: (1) The assemblage of various terranes of the eastern block, and (2) a tectono-magmatic event, which caused late- to posttectonic plutonism and a thermal perturbation. It differs, however, from the pre-peak metamorphic gold mineralization at Kolar and the single-stage mineralization at Ramagiri. Notably, greenschist facies gold mineralization occurred at Hutti 35–90 million years later than in the western Dharwar craton. Editorial handling: G. Beaudoin     

Hydrothermal alteration and ore-forming fluids associated with gold-tellurium mineralization in the Dongping gold deposit,China

The Dongping gold deposit hosted in syenites is one of the largest hydrothermal gold deposits in China and composed of ore veins in the upper parts and altered zones in the lower parts of the ore bodies. Pervasive potassic alteration and silicification overprint the wall rocks of the ore deposit. The alteration minerals include orthoclase, microcline, perthite, quartz, sericite, epidote, calcite, hematite and pyrite, with the quartz, pyrite and hematite assemblages closely associated with gold mineralization. The phases of hydrothermal alteration include: (i) potassic alteration, (ii) potassic alteration - silicification, (iii) silicification - epidotization - hematitization, (iv) silicification - sericitization - pyritization and (v) carbonation. Mass-balance calculations in potassic altered and silicified rocks reveal the gain of K₂O, Na₂O, SiO₂, HFSEs and transition elements (TEs) and the loss of REEs. Most major elements were affected by intense mineral reactions, and the REE patterns of the ore are consistent with those of the syenites. Gold, silver and tellurium show positive correlation and close association with silicification. Fluid inclusion homogenization temperatures in quartz veins range from 154 °C to 382 °C (peak at 275 °C–325 °C), with salinities of 4–9 wt.% NaCl equiv. At temperatures of 325 °C the fluid is estimated to have pH = 3.70–5.86, log fO₂ = − 32.4 to − 28.1, with Au and Te transported as Au (HS)₂⁻ and Te₂^2 − complexes. The ore forming fluids evolved from high pH and fO₂ at moderate temperatures into moderate-low pH, low fO₂ and low temperature conditions. The fineness of the precipitated native gold and the contents of the oxide minerals (e.g., magnetite and hematite) decreased, followed by precipitation of Au- and Ag-bearing tellurides. The hydrothermal system was derived from an alkaline magma and the deposit is defined as an alkaline rock-hosted hydrothermal gold deposit.     

Geology and geochemistry of the Huilvshan gold deposit,Xinjiang, China: Implications for mechanism of gold precipitation

The Huilvshan gold deposit in the west Junggar (Xinjiang, China) is hosted in chloritized basalts, chlorite–siderite-altered basalts, and quartz–siderite rocks. Our study demonstrated that all these rocks were derived by alteration of basalts in a shear zone. The orebodies, consisting of quartz-sulfide veins and disseminated sulfides, formed in five stages: quartz–muscovite (I), disseminated sulfides (II), quartz–ankerite-sulfide (III), quartz–calcite-sulfide (IV), and quartz–calcite (V). Auriferous minerals are native gold in stage III and electrum in stage IV. During alteration of basalts in the shear zone, ore-forming elements were released from basalts to ore-forming fluid. Compared with fresh basalts, sulfide-bearing chloritized basalts contain much higher Sr, Ba, P, La, Ce, U, Mn, Ni, Zn, As, Ag, and Au contents. Phase analysis of the As–Cu–Fe–S–O system with the SUPCRT92 software package indicates that a decrease of the a_H2S value, caused by the fluid–rock reactions and crystallization of sulfides, induced gold precipitation.     

Structural analysis of the Baolun gold deposit,Hainan Island,South China: Implications for metallogeny

The Baolun gold deposit is a mesothermal orogenic gold deposit located in the southwestern part of Hainan Island, South China. The deposit comprises a series of NNW-trending quartz-sulfide lodes situated within a parallel array of fault zones traversing a sequence of variably foliated flysch siliciclastic rocks of the Lower Silurian. Detailed field mapping documented at least five phases of deformation in the deposit including NNW-trending folding of the Lower Silurian rocks (D1), development of NNW-trending, steeply dipping ductile shear zones with an oblique dextral sense corresponding to NNE-SSW shortening (D2), WNW-ESE shortening and extension associated with an early oblique sinistral ductile shearing along the NNW-trending fault zones (D3), ENE-WSW shortening (D4), and near N-S extension (D5). The gold-bearing quartz lodes cut the strata folded in the D1, show some laminar layering related to ductile shear in the D2 and are overprinted by brittle structures formed in the D3 to D5. ⁴⁰Ar–³⁹Ar dating on muscovite from an auriferous quartz lode yielded an age of 242 ± 2.5 Ma, which, together with the age of 232 ± 2.5 Ma for an aplite vein in the deposit, suggests that the mineralization may be related to a tectono-thermal event in the Triassic. In the context of the southern South China plate tectonics, the formation of the Baolun gold deposit is interpreted to be related to the oblique dextral ductile shearing (D2) along the NNW-trending fault zones during the Indosinian orogeny, in relation to the convergence between the Indochina and South China plates.     

Mineral chemistry and geochemical behavior of hydrothermal alterations associated with mafic intrusive-related Au deposits at the Atud area,Central Eastern Desert,Egypt

Vein-type gold deposits in the Atud area are related to the metagabbro–diorite complex that occurred in Gabal Atud in the Central Eastern Desert of Egypt. This gold mineralization is located within quartz veins and intense hydrothermal alteration haloes along the NW–SE brittle–ductile shear zone, as well as along the contacts between them. By using the mass balance calculations, this work is to determine the mass/volume gains and losses of the chemical components during the hydrothermal alteration processes in the studied deposits. In addition, we report new data on the mineral chemistry of the alteration minerals to define the condition of the gold deposition and the mineralizing fluid based on the convenient geothermometers. Two generations of quartz veins include the mineralized grayish-to-white old vein (trending NW–SE), and the younger, non-mineralized milky white vein (trending NE–SW). The ore minerals associated with gold are essentially arsenopyrite and pyrite, with chalcopyrite, sphalerite, enargite, and goethite forming during three phases of mineralization; first, second (main ore), and third (supergene) phases. Three main hydrothermal alteration zones of mineral assemblages were identified (zones 1–3), placed around mineralized and non-mineralized quartz veins in the underground levels. The concentrations of Au, Ag, and Cu are different from zone to zone having 25–790 ppb, 0.7–69.6 ppm, and 6–93.8 ppm; 48.6–176.1 ppb, 0.9–12.3 ppm, and 39.6–118.2 ppm; and 53.9–155.4 ppb, 0.7–3.4 ppm, and 0.2–79 ppm for zones 1, 2, and 3, respectively.The mass balance calculations and isocon diagrams (calculated using the GEOISO-Windows program) revealed the gold to be highly associated with the main mineralized zone as well as sericitization/kaolinitization and muscovitization in zone 1 more than in zones 2 and 3. The sericite had a higher muscovite component in all analyzed flakes (average X_Ms = 0.89), with 0.10%–0.55% phengite content in wall rocks and 0.13%–0.29% phengite content in mineralized quartz veins. Wall rocks had higher calcite (CaCO₃) contents and lower MgCO₃ and FeCO₃ contents than the quartz veins. The chlorite flakes in the altered wall rocks were composed of pycnochlorite and ripidolite, with estimated formation temperatures of 289–295 °C and 301–312 °C, respectively. Albite has higher albite content (95.08%–99.20%) which occurs with chlorite in zone 3.