Probabilistic seismic hazard maps for the sultanate of Oman

This study presents the results of the first probabilistic seismic hazard assessment (PSHA) in the framework of logic tree for Oman. The earthquake catalogue was homogenized, declustered, and used to define seismotectonic source model that characterizes the seismicity of Oman. Two seismic source models were used in the current study; the first consists of 26 seismic source zones, while the second is expressing the alternative view that seismicity is uniform along the entire Makran and Zagros zones. The recurrence parameters for all the seismogenic zones were determined using the doubly bounded exponential distribution except the zones of Makran, which were modelled using the characteristic distribution. Maximum earthquakes were determined and the horizontal ground accelerations in terms of geometric mean were calculated using ground-motion prediction relationships developed based upon seismic data obtained from active tectonic environments similar to those surrounding Oman. The alternative seismotectonic source models, maximum magnitude, and ground-motion prediction relationships were weighted and used to account for the epistemic uncertainty. Hazard maps at rock sites were produced for 5?% damped spectral acceleration (SA) values at 0.1, 0.2, 0.3, 1.0 and 2.0?s spectral periods as well as peak ground acceleration (PGA) for return periods of 475 and 2,475?years. The highest hazard is found in Khasab City with maximum SA at 0.2?s spectral period reaching 243 and 397?cm/s² for return periods 475 and 2,475 years, respectively. The sensitivity analysis reveals that the choice of seismic source model and the ground-motion prediction equation influences the results most.     

Earthquake risk assessment for the building inventory of Muscat,Sultanate of Oman

Little Andaman, the fourth largest island in the Andaman group of islands of India, was severely affected by the December 26, 2004, Indian Ocean tsunami generated by massive earthquake of moment magnitude 9.3 Mw which devastated the Andaman and Nicobar group of islands causing heavy damage to life and property. Due to hostile terrain conditions not much information was available on the extent of inundation and run-up along the island except for Hut Bay region. In order to study the vulnerability of the island to tsunami hazard, the inundation in the island due to the 2004 tsunami was studied using TUNAMI N2 numerical model and ENVISAT ASAR datasets. The extent of inundation derived from the SAR imagery was compared using the RTK-GPS field survey points collected in the Hut Bay regions immediately after the 2004 tsunami. The extent of inundation obtained from SAR images for the entire island was compared with inundation obtained from model. It was observed that the inundation obtained from the model matched well with inundation extent from SAR imagery for nearshore regions, while for low-lying areas and creeks large deviations were observed. In the absence of field datasets, the inundation derived from SAR imagery would be effective in providing ground data to validate the numerical models which can then be run for multiple scenarios for disaster mitigation and planning operation in areas that have hostile terrain conditions.     

Deterministic and probabilistic seismic hazard analysis for Gwadar City, Pakistan

Gwadar City is located at the coastline of Pakistan. The city is currently in a phase of development, which is expected to become a future economic hub for Pakistan. This has led us to choose Gwadar for seismic hazard evaluation. Seismic hazard analysis for Gwadar is carried out using deterministic and probabilistic seismic hazard analysis techniques. The present study will help in sustainable development of a future large city and economic hub for Pakistan on ways of coping from a major threat of earthquake hazard. In deterministic seismic hazard analysis, line sources were identified close to Gwadar. Based on the analysis of maximum magnitude and closest distance (worse conditions), Makran subduction zone was identified out of all the line sources with earthquake potential of 8.2 at a distance of 30 km. This yielded a peak ground acceleration value of 0.38 g for Gwadar City. In second phase, probabilistic seismic hazard analysis technique with the area source modeling was adopted to acquire results at different return periods. For this purpose, seismic data were collected from the Pakistan Meteorological Department and International Seismological Center (2010) databases for development of a comprehensive data catalog. The a and b values were obtained using regression analysis for each source zone, and probabilistic analysis yielded the results of 0.34 g for a return period of 500 years. As per building codes of Pakistan, areas or cities with ground acceleration greater than 0.32 g are considered in seismic zone 4, and both deterministic and probabilistic hazard analysis place the city in seismic zone 4. These values correspond to rock site with shear wave velocity of 760 m/s.     

Non-Poisson probabilistic seismic hazard assessment

The development of the new seismic hazard map of metropolitan Tehran is based on probabilistic seismic hazard computation using the non-Poisson recurrence time model. For this model, two maps have been prepared to indicate the earthquake hazard of the region in the form of iso-acceleration contour lines. They display the non-Poisson probabilistic estimates of peak ground accelerations over bedrock for 10 and 63 % probability of exceedance in 50 years. To carry out the non-Poisson seismic hazard analysis, appropriate distributions of interoccurrence times of earthquakes were used for the seismotectonic provinces which the study region is located and then the renewal process was applied. In order to calculate the seismic hazard for different return periods in the probabilistic procedure, the study area encompassed by the 49.5–54.5°E longitudes and 34–37°N latitudes was divided into 0.1° intervals generating 1,350 grid points. PGA values for this region are estimated to be 0.30–0.32 and 0.16–0.17 g for 10 and 63 % probability of exceedance, respectively, in 50 years for bedrock condition.     

Seismic microzonation for Muscat region,Sultanate of Oman

Natural Hazards - Site characterization was carried out for Muscat region using the ambient noise measurements applying the horizontal-to-vertical spectral ratio (HVSR) technique and using active...     

Attenuation laws and seismic hazard assessment

In the present study, the seismic hazard in the city of Patras, central Greece, is estimated. The computations are based on a slightly modified version of the method proposed by Cornell, allowing the introduction of individual attenuation laws for each seismic source.The obtained results emphasize the dependence of hazard on attenuation and the importance of the use of local attenuation laws in seismic hazard assessment.Paper presented at the 21st General Assembly of the European Seismological Commission, held in Sofia, 1988.     

Attenuation laws and seismic hazard assessment

In the present study, the seismic hazard in the city of Patras, central Greece, is estimated. The computations are based on a slightly modified version of the method proposed by Cornell, allowing the introduction of individual attenuation laws for each seismic source. The obtained results emphasize the dependence of hazard on attenuation and the importance of the use of local attenuation laws in seismic hazard assessment.     

Bayesian techniques for seismic hazard assessment using imprecise data

Some Bayesian methods of dealing with inaccurate or vague data are introduced in the framework of seismic hazard assessment. Inaccurate data affected by heterogeneous errors are modeled by a probability distribution instead of the usual value plus a random error representation; these data are generically called imprecise. The earthquake size and the number of events in a certain time are modeled as imprecise data. Imprecise data allow us to introduce into the estimation procedures the uncertainty inherent in the inaccuracy and heterogeneity of the measuring systems from which the data were obtained. The problem of estimating the parameter of a Poisson process is shown to be feasible by the use of Bayesian techniques and imprecise data. This background technique can be applied to a general problem of seismic hazard estimation. Initially, data in a regional earthquake catalog are assumed imprecise both in size and location (i.e errors in the epicenter or spreading over a given source). By means of scattered attenuation laws, the regional catalog can be translated into a so-called site catalog of imprecise events. The site catalog is then used to estimate return periods or occurrence probabilities, taking into account all sources of uncertainty. Special attention is paid to priors in the Bayesian estimation. They can be used to introduce additional information as well as scattered frequency-size laws for local events. A simple example is presented to illustrate the capabilities of this methodology.     

Modeling and assessment of bridge structure for seismic hazard prevention

This study uses data from Mao-Luo-Hsi Bridge to model the bridge structure and a set of developed alarm and action values to formulate guidelines for bridge maintenance and seismic hazard prevention. The bridge model is improved by incorporating on-site ambient vibration measurement to perform modal analyses. Dynamic analyses of the bridge are implemented using the established 3D model subjected to uniform loading and seismic force, with or without consideration of soil interaction with the structure. The maximum displacements for different sections of the bridge are compared, and statistical regression analyses are used to explore their correlation. Information for bridge safety assessment is proposed, which can mitigate loss of property and lives due to bridge failure. Regression analyses of the maximum displacements between abutments D and E of the considered bridge in the axial, horizontal, and vertical directions under various seismic intensities are conducted, giving R ² values of 0.9462, 0.9352, and 0.9010, respectively. The developed maintenance guidelines are reliable since all parameters from regression analyses have a 95% confidence interval excluding the zero value. The bridge alarm value and action value are determined for this bridge site at earthquake intensity scales of 4 and 5, respectively.     

Probabilistic seismic hazard assessment for Lake Van basin,Turkey

The seismic hazard for the Lake Van basin is computed using a probabilistic approach, along with the earthquake data from 1907 to present. The spatial distribution of seismic events between the longitudes of 41–45° and the latitudes of 37.5–40°, which encompasses the region, indicates distinct seismic zones. The positions of these zones are well aligned with the known tectonic features such as the Tutak-Çald?ran fault zone, the Özalp fault zone, the Geva? fault zone, the Bitlis fault zone and Karl?ova junction where the North Anatolian fault zone and East Anatolian fault zone meet. These faults are known to have generated major earthquakes which strongly affected cities and towns such as Van, Mu?, Bitlis, Özalp, Muradiye, Çald?ran, Erci?, Adilcevaz, Ahlat, Tatvan, Geva? and Gürp?nar. The recurrence intervals of M _s ≥ 4 earthquakes were evaluated in order to obtain the parameters of the Gutenberg–Richter measurements for seismic zones. More importantly, iso-acceleration maps of the basin were produced with a grid interval of 0.05 degrees. These maps are developed for 100- and 475- year return periods, utilizing the domestic attenuation relationships. A computer program called Sistehan II was utilized to generate these maps.     

A seismic source zone model for the seismic hazard assessment of the Italian territory

We designed a new seismic source model for Italy to be used as an input for country-wide probabilistic seismic hazard assessment (PSHA) in the frame of the compilation of a new national reference map.

We started off by reviewing existing models available for Italy and for other European countries, then discussed the main open issues in the current practice of seismogenic zoning.

The new model, termed ZS9, is largely based on data collected in the past 10 years, including historical earthquakes and instrumental seismicity, active faults and their seismogenic potential, and seismotectonic evidence from recent earthquakes. This information allowed us to propose new interpretations for poorly understood areas where the new data are in conflict with assumptions made in designing the previous and widely used model ZS4.

ZS9 is made out of 36 zones where earthquakes with M_w > = 5 are expected. It also assumes that earthquakes with M_w up to 5 may occur anywhere outside the seismogenic zones, although the associated probability is rather low. Special care was taken to ensure that each zone sampled a large enough number of earthquakes so that we could compute reliable earthquake production rates.

Although it was drawn following criteria that are standard practice in PSHA, ZS9 is also innovative in that every zone is characterised also by its mean seismogenic depth (the depth of the crustal volume that will presumably release future earthquakes) and predominant focal mechanism (their most likely rupture mechanism). These properties were determined using instrumental data, and only in a limited number of cases we resorted to geologic constraints and expert judgment to cope with lack of data or conflicting indications. These attributes allow ZS9 to be used with more accurate regionalized depth-dependent attenuation relations, and are ultimately expected to increase significantly the reliability of seismic hazard estimates.     

基于震害统计的城市地下空间地震安全性评价

建筑物的地震安全性是城市规划和建设过程首先要回答的问题。我国城市地震安全性评价的方法理论多针对地上建筑物,而对地下空间的地震安全性研究较为薄弱,严重滞后于城市发展对地下空间的需求。活断层是诱发地震、导致建筑物破坏的的直接因素。考虑到空间关系上,地下空间与断层之间的交互关系为相交或相离。因此,本文将地下空间分为两类:与断层相交的地下空间称为跨断层地下空间,远离断层的地下空间称为远离断层地下空间。本文尝试将断裂带同震地表破裂、地震峰值加速度、地震烈度等地表地震安全性评价考量的要素与地下空间埋藏深度建立联系,并在此基础上总结基于震害统计的地下空间地震安全性评价方法。最后,本文选取地下空间利用需求较高的深圳和北京地区为实例进行介绍。     

Systematization of active faults for the assessment of the seismic hazard

A systematization of active faults has been developed based on the progress of scientists from the leading countries in the world in the study of seismotectonics and seismic hazard problems. It is underlain by the concept of the fault-block structure of the geological-geophysical environment governed by the interaction of differently oriented active faults, which are divided into two groups—seismogenic and nonseismogenic faults. In seismogenic fault zones, the tectonic stress accumulated is relieved by means of strong earthquakes. Nonseismogenic fault zones are characterized by creep displacement or short-term, oscillatory, and reciprocal movements, which are referred to local superintense deformations of the Earth’s crust (according to the terminology used by Yu.O. Kuz’min). For a situation when a strong earthquake happens, a subgroup of seismodistributing faults has been identified that surround the seismic source and affect the distribution of the seismic waves and, as a consequence, the pattern of the propagation of the coseismic deformations in the fault-block environment. Seismodistributing faults are divided into transit and sealing faults. Along transit faults, secondary coseismic effects (landfalls, landslides, ground fractures, liquefaction, etc) are intensified during earthquakes. In the case of sealing faults, enhancement of the coseismic effects can be observed on the disjunctive limb nearest to the epicenter, whereas, on the opposite limb, the intensity of such effects appreciably decreases. Seismogenic faults or their systems are associated with zones of earthquake source origination (ESO), which include concentrated seismicity regions. In such zones, each earthquake source is related to the evolution of a fault system. ESO zones also contain individual seismogenic sources being focuses of strong earthquakes with M of ≥5.5 in the form of ruptures, which can be graphically represented in 2D or 3D as a surface projection of the source. Depending on the type of data based on which they are identified, individual seismogenic sources are divided into geological-geophysical and macroseismic sources. The systematization presented is the theoretical basis for and the concept of the relational database that is being developed by the authors as an information system for the generation of seismotectonic GIS projects required for the subsequent analysis of the seismic hazard and the assessment of the probability of the origination of macroseismic earthquake effects in a predetermined location.     

Seismic sources for southern Pakistan and seismic hazard assessment of Karachi

Natural Hazards - Karachi is Pakistan’s largest city with population exceeding 18 million and is amongst the top five most congested cities in the world. Karachi has experienced no earthquake...     

Cement-Stabilization of Sabkha Soils from Al-Auzayba,Sultanate of Oman

Sabkha soils are salt-bearing formations that are formed in arid regions. In their in situ states the sabkha soils have high compressibility and low shear strength. These soils are also heterogeneous and their properties depend on the type and amount of salt present. Thus, these soils are not suitable for support of infrastructures without the risk of high settlement and/or bearing capacity failure. This paper investigates the possibility of using cement to improve the shear strength of sabkha soils for possible use as a foundation-bearing soil. The sabkha soil used in this study is a sandy sabkha obtained from the coastal plains at Al-Auzayba, Sultanate of Oman. Cement was added in percentages of 2.5, 5, 7.5 and 10%, by dry weight of soil. The soil-stabilizer mixers were allowed to cure for 7, 14 and 28 days. Laboratory tests such as compaction, unconfined compression, consolidated undrained triaxial and durability tests were performed to measure the engineering characteristics of the stabilized material. The results showed substantial improvements in the shear strength of the sabkha–cement mixtures and the mixtures are also durable with small weight loss after 12 wetting/drying cycles. Thus, cement can be used to improve the shear strength of sabkha soils. Furthermore, the effective stress path and the tress-strain relation of the sabkha–cement mixtures follow trends similar to those of cemented calcareous soils.     

On the distribution of rainfall over the Sultanate of Oman

Rainfall distribution over the Sultanate of Oman is analysed. Data from seven recently installed weather stations as well as supporting data from scattered sources were used. Distribution maps were drawn. NW and NE winter wind meet resulting in troughs and rainfall on the Mountains and Coastal Strips. Summer monsoon wind dominates the S. Central areas of overlap receive light showers from both summer monsoons and winter local troughs. Heavier amounts of rainfall are generally associated with high altitude.