Outokumpu revisited: New mineral deposit model for the mantle peridotite-associated Cu–Co–Zn–Ni–Ag–Au sulphide deposits

The metaturbidites of the Palaeoproterozoic Jormua–Outokumpu thrust belt in eastern Finland enclose m- to km-scale ultramafic massifs that are distributed over an area of more than 5000 km². These bodies, which almost entirely consist of highly depleted mantle peridotites (now metaserpentinites and metaperidotites), are intimately associated with massive to semimassive, polymetallic Cu–Co–Zn–Ni–Ag–Au sulphide deposits that sustained mining in the region between 1913 and 1988. Currently, one deposit (Kylylahti) is proceeding into a definitive feasibility study emphasising the renewed economic interest for Outokumpu-type deposits.The origin of these Outokumpu-type Cu–Co–Zn–Ni–Ag–Au deposits is now re-interpreted to be polygenetic. First, their formation requires deposition of a Cu-rich proto-ore within peridotitic sea floor at  1950 Ma. Close modern analogues to the proto-ore setting include, for example, the Logatchev and Rainbow fields at the Mid-Atlantic Ridge, where venting of high-T–low-pH hydrothermal fluid resulted in accumulations of Cu–Zn–Co–Ag–Au sulphides on serpentinised ultramafic seafloor. Second, the Ni-rich composition of Outokumpu sulphide ores calls for a separate source for nickel: Some 40 Ma after the deposition of the Cu-rich proto-ore – concomitant with the obduction of the ultramafic massifs – disseminated Ni sulphides formed through chemical interaction between obducting peridotite massifs and adjacent black schists. This process was related to listwaenite–birbirite type carbonate–silica alteration at margins of the ultramafic massifs. Due to this alteration, silicate nickel was released from the primary Fe–Mg silicates and redeposited as Ni sulphides in the alteration fringes of the massifs.We propose that syntectonic mixing of these two “end-member” sulphides, i.e., the primary Cu-rich proto-ore and the secondary Ni-sulphide disseminations, resulted in the uncommon metal combination of the Outokumpu-type sulphides. Late tectonic solid-state re-mobilisation, related to the duplexing of the ore by isoclinal folding, upgraded the sulphides into economic deposits.     

4: Transpressional tectonics, lower crust decoupling and intrusion of deep mafic sills: A model for the unusual metallogenesis of SW Iberia

SW Iberia is interpreted as an accretionary magmatic belt resulting from the collision between the South Portuguese Zone and the autochthonous Iberian terrane in Variscan times (350 to 330 Ma). In the South Portuguese Zone, pull-apart basins were filled with a thick sequence of siliciclastic sediments and bimodal volcanic rocks that host the giant massive sulphides of the Iberian Pyrite Belt. Massive sulphides precipitated in highly efficient geochemical traps where metal-rich but sulphur-depleted fluids of dominant basinal derivation mixed with sulphide-rich modified seawater. Massive sulphides formed either in porous/reactive volcanic rocks by sub-seafloor replacement, or in dark shale by replacement of mud or by exhalation within confined basins with high biogenic activity. Crustal thinning and magma intrusion were responsible for thermal maturation and dehydration of sedimentary rocks, while magmatic fluids probably had a minor influence on the observed geochemical signatures.The Ossa Morena Zone was a coeval calc-alkaline magmatic arc. It was the site for unusual mineralization, particularly magmatic Ni–(Cu) and hydrothermal Fe-oxide–Cu–Au ores (IOCG). Most magmatism and mineralization took place at local extensional zones along first-order strike-slip faults and thrusts. The source of magmas and IOCG and Ni–(Cu) deposits probably lay in a large mafic–ultramafic layered complex intruded along a detachment at the boundary between the upper and lower crust. Here, juvenile melts extensively interacted with low-grade metamorphic rocks, inducing widespread anatexis, magma contamination and further exsolution of hydrothermal fluids. Hypersaline fluids (δ¹⁸O_fluid > 5.4‰ to 12‰) were focused upward into thrusts and faults, leading to early magnetite mineralization associated with a high-temperature (> 500 °C) albite–actinolite–salite alteration and subsequent copper–gold-bearing vein mineralization at somewhat lower temperatures. Assimilation of sediments by magmas led in turn to the formation of immiscible sulphide and silicate melts that accumulated in the footwall of the layered igneous complex. Further injection of both basic and sulphide-rich magmas into the upper crust led to the formation of Ni–(Cu)-rich breccia pipes.Younger (330 to 280 Ma?) peraluminous granitoids probably reflect the slow ascent of relatively dry and viscous magmas formed by contact anatexis. These granitoids have W–(Sn)- and Pb–Zn-related mineralization that also shows geochemical evidence of major mantle–crust interaction. Late epithermal Hg–(Cu–Sb) and Pb–Zn–(Ag) mineralization was driven by convective hydrothermal cells resulting from the high geothermal gradients that were set up in the zone by intrusion of the layered igneous complex. In all cases, most of the sulphur seems to have been derived from leaching of the host sedimentary rocks (δ³⁴S = 7‰ to 20‰) with only limited mixing with sulphur of magmatic derivation.The metallogenic characteristics of the two terranes are quite different. In the Ossa Morena Zone, juvenile magmatism played a major role as the source of metals, and controlled the styles of mineralization. In the South Portuguese Zone, magmas only acted as heat sources but seem to have had no major influence as sources of metals and fluids, which are dominated by crustal signatures. Most of the magmatic and tectonic features related to the Variscan subduction and collision seem to be masked by those resulting from transpressional deformation and deep mafic intrusion, which led to the development of a metallogenic belt with little resemblance to other accretionary magmatic arcs.     

Geochronology and petrogenesis of the post-orogenic Cu–Ni sulfide-bearing mafic–ultramafic complexes in Jilin Province, NE China

Northeastern (NE) China is a well-documented example of a collisional zone characterized by widespread post-orogenic granites and mafic–ultramafic complexes. Based on a study of the Hongqiling and Piaohechuan Cu–Ni sulfide-bearing mafic–ultramafic complexes in central Jilin province, we present geological, petrological, geochemical and geochronological data which indicates their post-orogenic origin.The Hongqiling complex comprises pyroxenite, olivine websterite, lherzolite, gabbro and leucogabbro. Zircon U–Pb SHRIMP analyses on a leucogabbro of the Hongqiling complex yield a weighted mean ²⁰⁶Pb–²³⁸U age of 216±5 Ma. The Piaohechuan complex is composed of gabbro, pyroxenite and dolerite, exposed as dikes. A plagioclase-bearing pyroxenite has a U–Pb zircon weighted mean ²⁰⁶Pb–²³⁸U age of 217±3 Ma, identical to that of the Hongqiling complex. These ages are coeval with the emplacement of A-type granites in the area, but slightly younger than the regional metamorphism (240 Ma) and syn-orogenic granitic magmatism (246±4 Ma). This suggests that these mafic–ultramafic complexes are post-orogenic in origin. The age data also indicated a short period of lithospheric stabilization of about 30 Ma after cessation of orogenic activity.Geochemical investigation indicates that the primary mafic magma was a lithospheric mantle-derived basalt resulting from the upwelling of asthenosphere due to lithospheric delamination during post-orogenic processes. The magmatic source was contaminated by a small amount of crustal material, and subsequent crystal fractionation resulted in the Cu–Ni mineralization.The widespread occurrence of mafic–ultramafic complexes in the Xing'an–Mongolian Orogenic Belt of NE China and in the Altay–Tianshan–Junggar Orogenic Belt of Northern Xinjiang indicates that mafic intrusions are an important magmatic suite that evolved during post-orogenic processes. Portions of this mafic magma could have underplated the lower crust, and served as the heat source for associated late-stage granitic magmas.     

Melonite group minerals and other tellurides from three Cu–Ni–PGE prospects, Eastern Desert, Egypt

Melonite group minerals and other tellurides are described from three Cu–Ni–PGE prospects in the Eastern Desert of Egypt: Gabbro Akarem, Genina Gharbia and Abu Swayel. The prospects are hosted in late Precambrian mafic–ultramafic rocks and have different geologic histories. The Gabbro Akarem prospect is hosted in dunite pipes where net-textured and massive sulfides are associated with spinel and Cr-magnetite. Michenerite, merenskyite, Pd–Bi melonite and hessite occur mainly as inclusions in sulfides. Typical magmatic textures indicate a limited role of late- and post-magmatic hydrothermal processes. At Genina Gharbia, ore forms either disseminations in peridotite or massive patches in hornblende-gabbro in the vicinity of metasedimentary rocks. Actinolitic hornblende, epidote, chlorite and quartz are common secondary silicates. Sulfide textures and host rock petrography suggest a prolonged late-magmatic hydrothermal event. Michenerite, merenskyite, Pd–Bi melonite, altaite, hessite, tsumoite, sylvanite and native Te are mainly present in secondary silicates. The Abu Swayel prospect occurs in conformable, lens-like mafic–ultramafic rocks in metasedimentary rocks and along syn-metamorphic shear zone. The sulfide ore and host rocks are metamorphosed (amphibolite facies; 550 to 650 °C, 4 to 5 kbar) and syn-metamorphically sheared. Melonite group minerals are represented by merenskyite and Pd–Bi melonite. Other tellurides comprise hessite, altaite and joséite-B. Melonite group minerals and tellurides occur as inclusions in mobilized sulfides and along cracks in metamorphic garnet and plagioclase.The different geological history of the three prospects permits an examination of the role played by magmatic, late-magmatic and metamorphic processes on the mineralogy of melonite group minerals and diversity of tellurides. The contents of PGE and Te in the ore and temperature of crystallization control the mineralogy and compositional trends of the melonite group minerals. Crystallization of the melonite group minerals over a wide range of temperatures in a Te-rich environment enhances the elemental substitutions. Merenskyite dominates the mineralogy of the group at low Te activity, while Pd–Bi melonite is the common phase at high Te activity.     

Multiphase origin of the Cu–Co ore deposits in the western part of the Lufilian fold-and-thrust belt, Katanga (Democratic Republic of Congo)

A multiphase origin of the Cu–Co ores in the western part of the Lufilian fold-and-thrust belt in Central Africa is proposed based on literature, satellite image interpretations and petrographic and fluid inclusion analyses on samples from the stratiform mineralization of Kamoto and Musonoi (DR Congo). The various mineral occurrences in the Katanga Copperbelt can be classified in distinct categories: stratiform, supergene enrichment and vein-type. The stratiform mineralization form the largest group and can be found mainly in Lower Roan (R-2) rocks, which can be identified as ridges on satellite imagery. Ore deposits outside the R-2 occur along lineaments and result often from supergene enrichment.The main phase of the stratiform mineralization in the Katanga Copperbelt occurred during diagenesis preceding the Lufilian orogeny. Petrographic observation identified various mineralizing phases, which played a role in the formation of these stratiform mineralization. Mineralization started during early diagenesis, but mainly occurred during further burial. After the formation of early diagenetic pyrite, the circulation of diagenetic Cu–Co-rich fluids resulted in the formation of the main mineralization. Preliminary microthermometric investigation of primary inclusions in authigenic quartz, associated with the main stage of stratiform mineralization, indicates that an H₂O–NaCl fluid with a minimum temperature between 80 and 195 °C and a salinity between 8.4 and 18.4 eq. wt% NaCl circulated during the main phase of mineralization.Numerous faults and fractures formed during the Lufilian orogeny cut the stratiform mineralization. They are, however, at Kamoto and Musonoi only associated with minor sulphides. Supergene alteration along faults and fractures resulted in an enrichment of the mineralization, with the formation of secondary Cu-oxides, -carbonates and -silicates.The importance of the interaction of various processes for the formation of economic Cu–Co ore deposits is confirmed by the straightforward relationship on satellite imagery between the location of economic mineral occurrences and faults, which acted as pathway for descending waters that caused the supergene enrichment and upgrading of the primary mineralization.     

Molybdenite Re–Os and albite Ar/Ar dating of Cu–Au–Mo and magnetite porphyry systems in the Yangtze River valley and metallogenic implications

The area of the Middle–Lower Yangtze River valley, Eastern China, extending from Wuhan (Hubei province) to western Zhenjiang (Jiangsu province), hosts an important belt of Cu–Au–Mo and Fe deposits. There are two styles of mineralization, i.e., skarn/porphyry/stratabound Cu–Au–Mo–(Fe) deposits and magnetite porphyry deposits in several NNE-trending Cretaceous fault-bound volcanic basins. The origin of both deposit systems is much debated. We dated 11 molybdenite samples from five skarn/porphyry Cu–Au–Mo deposits and 5 molybdenite samples from the Datuanshan stratabound Cu–Au–Mo deposit by ICP-MS Re–Os isotope analysis. Nine samples from the same set were additionally analyzed by NTIMS on Re–Os. Results from the two methods are almost identical. The Re–Os model ages of 16 molybdenite samples range from 134.7 ± 2.3 to 143.7 ± 1.6 Ma (2σ). The model ages of the five samples from the Datuanshan stratabound deposit vary from 138.0 ± 3.2 to 140.8 ± 2.0 Ma, with a mean of 139.3 ± 2.6 Ma; their isochron age is 139.1 ± 2.7 Ma with an initial Os ratio of 0.7 ± 8.1 (MSWD = 0.29). These data indicate that the porphyry/skarn systems and the stratabound deposits have the same age and suggest an origin within the same metallogenic system. Albite ⁴⁰Ar/³⁹Ar dating of the magnetite porphyry deposits indicates that they formed at 123 to 125 Ma, i.e., 10–20 Ma later. Both mineralization styles characterize transitional geodynamic regimes, i.e., the period around 140 Ma when the main NS-trending compressional regime changed to an EW-trending lithospheric extensional regime, and the period of 125–115 Ma of dramatic EW-trending lithospheric extension.     

Ni–Cu–(PGE) magmatic sulfide deposits in the Yangliuping area,Permian Emeishan igneous province,SW China

The Ni–Cu–PGE sulfide deposits in the Yangliuping area, SW China, are hosted in mafic–ultramafic sills. The four mineralized sills are located in the Yangliuping tectonic dome and intrude Devonian carbonaceous marble, graphitic schist. The sills are 200–300 m thick and 1,000–2,000 m in strike length and now consist chiefly of serpentinite, talc schist, tremolite schist, and meta-gabbro. Disseminated Ni–Cu sulfide mineralisation occurs in the serpentinite in the lower parts of the sills. Massive sulfide mineralisation is located in the base of the sills and in the footwall along fractures beneath the mineralized serpentinite. Although the sulfide ores have been modified by hydrothermal activity, there are relict cumulate textures in the disseminated sulfides indicating a magmatic origin for the ores. The Yangliuping Intrusions and the Dashibao Formation have similar primitive-mantle normalized trace element and platinum group element (PGE) patterns, indicating that they are derived from a common parental magma type. The positive correlation between Cu concentrations and Cu/Zr ratios of the Dashibao Formation basalts indicates that the chalcophile elements were removed before eruption. We propose that fractional crystallization of the Yangliuping magma accompanied by the introduction of S and CO₂ from the wall rocks caused the magma to become S-saturated leading to the segregation of magmatic sulfides that became enriched in Ni–Cu–(PGE). The sills acted as conduits for the overlying Dashibao Formation basalts with the sulfide liquid, along with early crystallizing olivine and pyroxene, segregating from the magma as it passed through the conduits prior to eruption.Editorial handling: H.E. Frimmel     

The roles of magmatic and hydrothermal processes in PGE mineralization,Ferguson Lake deposit,Nunavut, Canada

The Ferguson Lake Ni–Cu–Co–platinum-group element (PGE) deposit in Nunavut, Canada, occurs near the structural hanging wall of a metamorphosed gabbroic sill that is concordant with the enclosing country rock gneisses and amphibolites. Massive to semi-massive sulfide occurs toward the structural hanging wall of the metagabbro, and a low-sulfide, high-PGE style of mineralization (sulfide veins and disseminations) locally occurs ~30–50 m below the main massive sulfide. Water–rock interaction in the Ferguson Lake Ni–Cu–Co–PGE deposit is manifested mostly as widespread, post-metamorphic, epidote–chlorite–calcite veins, and replacement assemblages that contain variable amounts of sulfides and platinum-group minerals (PGM). PGM occur as inclusions in magmatic pyrrhotite and chalcopyrite in both the massive sulfide and high-PGE zones, at the contact between sulfides and hornblende or magnetite inclusions in the massive sulfide, in undeformed sulfide veins and adjacent chlorite and/or epidote halos, in hornblende adjacent to hydrothermal veins, and in plagioclase–chlorite aggregates replacing garnet cemented by sulfide. The PGM are mostly represented by the kotulskite (PdTe)–sobolevskite (PdBi) solid solution but also include michenerite (PdBiTe), froodite (PdBi₂), merenskyite (PdTe₂), mertieite II (Pd₈[Sb,As]₃), and sperrylite (PtAs₂) and occur in variety of textural settings. Those that occur in massive and interstitial sulfides, interpreted to be of magmatic origin and formed through exsolution from base metal sulfides at temperatures <600°C, are dominantly Bi rich (i.e., Te-bearing sobolevskite), whereas those that occur in late-stage hydrothermal sulfide/silicate veins and their epidote–chlorite alteration halos tend to be more Te rich (i.e., Bi-bearing kotulskite). The chemistry and textural setting of the various PGM supports a genetic model that links the magmatic and hydrothermal end-members of the sulfide–PGM mineralization. The association of PGM with magmatic sulfides in the massive sulfide and high-PGE zones has been interpreted to indicate that PGE mineralization was initially formed through exsolution from base metal sulfides which formed by magmatic sulfide liquid segregation and crystallization. However, the occurrence of PGM in undeformed sulfide-bearing veins and in their chlorite–epidote halos and differences in PGM chemistry indicate that hydrothermal fluids were responsible for post-metamorphic redistribution and dispersion of PGE.     

The Carlés copper–gold–molybdenum skarn (Asturias, Spain): geometry, mineral associations and metasomatic evolution

This paper presents the petrographical, mineralogical and geochemical characteristics of the Carlés Cu–Mo–Au ore deposit, located in the Rio Narcea Gold Belt (Cantabrian zone of the Iberian Massif). It is related to a small postkinematic calc-alkaline monzogranite, which intrudes as a cedar-tree laccolith into the upper siliciclastic Furada Formation (late Silurian age) and the Nieva carbonates (early Devonian age). The Carlés deposit consists mainly of a well-developed exoskarn. The exoskarn is mostly calcic skarn made up of early garnet and pyroxene, and later amphibole, magnetite and sulfides. The presence of magnesian skarn has been recorded on the north side of the intrusion (roof of granitoid). Magnesian skarn consists of olivine, which is partially replaced by diopside and phlogopite and spinel. Close to the igneous rock, skarns are overprinted by strong potassic alteration. The ore is related to the skarn retrogradation and post-skarn veining and faulting. The skarn-related ore consists of earlier, uneconomic magnetite and Fe–As sulfide assemblages and economic Cu–Au–Ag (Bi–Te) assemblages on the eastern and western sides of the contact aureole, and uneconomic Mo and subeconomic Fe–As–Cu–Au–Ag on the northern side of the contact. Later subeconomic Fe–As–Sb–(Zn–Sn–Cu–Au–Ag) assemblages crosscut the granitoid, skarn, marbles and mineral associations developed previously, and are related to younger episodes of fracturing and faulting. Fluid inclusions in the first hydrothermal stage consist of an aqueous solution with significant contents of CO₂, which reach unmixing conditions as a result of a decrease in P–T conditions. This led to two types of solutions, aqueous solutions of moderate to high salinity and hydrocarbon solutions of low salinity. This unmixing phenomenon controlled the first stage of gold precipitation. During the late hydrothermal activity, primary low-salinity-aqueous-carbonic inclusions with contrasting densities are found. They homogenize into vapor, critical or liquid phase. Homogenization temperatures are practically the same in all inclusions, indicating a boiling phenomenon that could control a new precipitation of gold.     

Multi-stage Ag–Bi–Co–Ni–U and Cu–Bi vein mineralization at Wittichen,Schwarzwald, SW Germany: geological setting,ore mineralogy,and fluid evolution

The Wittichen Co–Ag–Bi–U mining area (Schwarzwald ore district, SW Germany) hosts several unconformity-related vein-type mineralizations within Variscan leucogranite and Permian to Triassic redbeds. The multistage mineralization formed at the intersection of two fault systems in the last 250 Ma. A Permo-Triassic ore stage I with minor U–Bi–quartz–fluorite mineralization is followed by a Jurassic to Cretaceous ore stage II with the main Ag and Co mineralization consisting of several generations of gangue minerals that host the sub-stages of U–Bi, Bi–Ag, Ni–As–Bi and Co–As–Bi. Important ore minerals are native elements, Co and Ni arsenides, and pitchblende; sulphides are absent. The Miocene ore stage III comprises barite with the Cu–Bi sulfosalts emplectite, wittichenite and aikinite, and the sulphides anilite and djurleite besides native Bi, chalcopyrite, sphalerite, galena and tennantite. The mineral-forming fluid system changed from low salinity (<5 wt.% NaCl) at high temperature (around 300°C) in Permian to highly saline (around 25 wt.% NaCl + CaCl₂) at lower temperatures (50–150°C) in Triassic to Cretaceous times. Thermodynamic calculations and comparison with similar mineralizations worldwide show that the Mesozoic ore-forming fluid was alkaline with redox conditions above the hematite–magnetite buffer. We suggest that the precipitation mechanism for native elements, pitchblende and arsenides is a decrease in pH during fluid mixing processes. REE patterns in fluorite and the occurrence of Bi in all stages suggest a granitic source of some ore-forming elements, whereas, e.g. Ag, Co and Ni probably have been leached from the redbeds. The greater importance of Cu and isotope data indicates that the Miocene ore stage III is more influenced by fluids from the overlying redbeds and limestones than the earlier mineralization stages.     

The Lower Changjiang (Yangzi/Yangtze River) metallogenic belt, east central China: intrusion- and wall rock-hosted Cu–Fe–Au, Mo, Zn, Pb, Ag deposits

The lower valley of Changjiang, from Wuhan of the Hubei Province in the west to Zhenjiang of the Jiangsu Province in the east, contains more than 200 polymetallic (Cu–Fe–Au, Mo, Zn, Pb, Ag) deposits and is one of the most important metallogenic belts in China. This metallogenic belt, situated at the northern margin of the Yangzi craton and bordered by the Dabieshan ultrahigh pressure metamorphic belt to the north, consists mainly of Cambrian–Triassic marine clastic sedimentary rocks and carbonate and evaporite rocks, which overlay a Precambrian basement and are intruded by Yanshanian (205 to 64 Ma) granitoid intrusions and subvolcanic complexes. Repeated tectonism from Late Proterozoic to Triassic resulted in extensively developed networks of faults and folds involving the Cambrian–Triassic sedimentary strata and the Precambrian basement. The Yanshanian granitoid intrusions and subvolcanic complexes in the Lower Changjiang metallogenic belt are characterized by whole-rock δ¹⁸O of +8‰ to +10‰, initial ⁸⁷Sr/⁸⁶Sr of 0.704 to 0.708, and εNd^t from −10 to −17 and have been interpreted to have originated from mixing between juvenile mantle and old crustal materials. Also, the Yanshanian granitoids exhibit eastward younging and increase in alkalinity (i.e., from older calc–alkaline in the west to younger subalkaline–alkaline in the east), which are related to oblique collision between the Yangzi and Sino-Korean cratons and tectonic evolution from early compressional to late extensional or rifting regimes. Most polymetallic deposits in the Lower Changjiang metallogenic belt are clustered in seven districts where the Yanshanian magmatism is particularly extensive: from west to east, Edong, Jiurui, Anqing–Guichi, Luzhong, Tongling, Ningwu and Ningzhen. Mineralization is characterized by the occurrence of three distinct types of orebodies in individual deposits: orebodies in Yanshanian granitoid intrusions, skarn orebodies at the contact zones between the Yanshanian intrusions and Late Paleozoic–Early Mesozoic sedimentary rocks, and stratabound massive sulfide orebodies in the Late Paleozoic–Early Mesozoic sedimentary strata. The most important host sedimentary strata are the Middle Carboniferous Huanglong Formation, Lower Permian and Lower–Middle Triassic carbonate and evaporite rocks. The intrusion-hosted and skarn orebodies exhibit well-developed zonation in alteration assemblages, metal contents, and isotopic compositions within individual deposits, and apparently formed from hydrothermal activities related to the Yanshanian magmatism. The stratabound massive sulfide orebodies in the Late Paleozoic–Early Mesozoic sedimentary strata have long been suggested to have formed from sedimentary or volcano-sedimentary exhalative processes in shallow marine environments. However, extensive research over the last 40 years failed to produce unequivocal evidence for syngenetic mineralization. On the basis of geological relationships and isotope geochemical characteristics, we propose a carbonate-hosted replacement deposit model for the genesis of these stratabound massive sulfide orebodies and associated skarn orebodies. This model suggests that epigenetic mineralization resulted from interactions between magmatic fluids evolved from the Yanshanian intrusions with carbonate and evaporite wall rocks. Mineralization was an integral but distal part of the larger hydrothermal systems that formed the proximal skarn orebodies at the contact zones and the intrusion-hosted orebodies. The stratabound massive sulfide deposits of the Lower Changjiang metallogenic belt share many features with the well-studied, high-temperature, carbonate-hosted replacement deposits of northern Mexico and western United States, particularly with respect to association with small, shallow granitoid complexes, structural and stratigraphic controls on mineralization, alteration assemblages, geometry of orebodies, metal association, metal zonation and isotopic systematics.     

Geochemistry and evolution of ore-forming fluids of the Yueshan Cu–Au skarn- and vein-type deposits, Anhui Province, South China

The Yueshan mineral belt is geotectonically located at the centre of the Changjiang deep fracture zone or depression of the lower Yangtze platform. Two main types of ore deposits occur in the Yueshan orefield: Cu–Au–(Fe) skarn deposits and Cu–Mo–Au–(Pb–Zn) hydrothermal vein-type deposits. Almost all deposits of economic interest are concentrated within and around the eastern and northern branches of the Yueshan dioritic intrusion. In the vicinity of the Zongpu and Wuhen intrusions, there are many Cu–Pb–Zn–Au–(S) vein-type and a few Cu–Fe–(Au) skarn-type occurrences.Fluid inclusion studies show that the ore-forming fluids are characterised by a Cl⁻(S)–Na⁺–K⁺ chemical association. Hydrothermal activity associated with the above two deposit types was related to the Yueshan intrusion. The fluid salinity was high during the mineralisation processes and the fluid also underwent boiling and mixed with meteoric water. In comparison, the hydrothermal activity related to the Zongpu and Wuhen intrusions was characterised by low salinity fluids. Chlorine and sulphur species played an important role in the transport of ore-forming components.Hydrogen- and oxygen-isotope data also suggest that the ore-forming fluids in the Yueshan mineral belt consisted of magmatic water, mixed in various proportions with meteoric water. The enrichment of ore-forming components in the magmatic waters resulted from fluid–melt partitioning. The ore fluids of magmatic origin formed large Cu–Au deposits, whereas ore fluids of mixed magmatic-meteoric origin formed small- to medium-sized deposits.The sulphur isotopic composition of the skarn- and vein-type deposits varies from − 11.3‰ to + 19.2‰ and from + 4.2‰ to + 10.0‰, respectively. These variations do not appear to have been resulted from changes of physicochemical conditions, rather due to compositional variation of sulphur at the source(s) and by water–rock interaction. Complex water–rock interaction between the ore-bearing magmatic fluids and sedimentary wall rocks was responsible for sulphur mixing. Lead and silicon isotopic compositions of the two deposit types and host rocks provide similar indications for the sources and evolution of the ore-forming fluids.Hydrodynamic calculations show that magmatic ore-forming fluids were channelled upwards into faults, fractures and porous media with velocities of 1.4 m/s, 9.8 × 10^− 1 to 9.8 × 10^− 7 m/s and 3.6 × 10^− 7 to 4.6 × 10^− 7 m/s, respectively. A decrease of fluid migration velocity in porous media or tiny fractures in the contact zones between the intrusive rocks and the Triassic sedimentary rocks led to the deposition of the ore-forming components. The major species responsible for Cu transport are deduced to have been CuCl, CuCl₂⁻, CuCl₃²⁻ and CuClOH, whereas Au was transported as Au₂(HS)₂S²⁻, Au(HS)₂⁻, AuHS and AuH₃SiO₄ complexes. Cooling and a decrease in chloride ion concentration caused by fluid boiling and mixing were the principal causes of Cu deposition. Gold deposition was related to decrease of pH, total sulphur concentration and fO₂, which resulted from fluid boiling and mixing.Geological and geochemical characteristics of the two deposit types in the Yueshan mineral belt suggest that there is a close genetic relationship with the dioritic magmatism. Geochronological data show that the magmatic activity and the mineralisation took place between 130 and 136 Ma and represent a continuous process during the Yanshanian time. The cooling of the intrusions and the mineralisation event might have lasted about 6 Ma. The cooling rate of the magmatic intrusions was 80 to 120 °C my^− 1, which permitted sufficient heat supply by magma to the ore-forming system.     

Porphyry Cu–Au and associated polymetallic Fe–Cu–Au deposits in the Beiya Area, western Yunnan Province, south China

The Alkaline porphyries in the Beiya area are located east of the Jinshajiang suture, as part of a Cenozoic alkali-rich porphyry belt in western Yunnan. The main rock types include quartz-albite porphyry, quartz-K-feldspar porphyry and biotite–K-feldspar porphyry. These porphyries are characterised by high alkalinity [(K₂O + Na₂O)% > 10%], high silica (SiO₂% > 65%), high Sr (> 400 ppm) and ⁸⁷Sr/⁸⁶Sr (> 0.706)] ratio and were intruded at 65.5 Ma, between 25.5 to 32.5 Ma, and about 3.8 Ma, respectively. There are five main types of mineral deposits in the Beiya area: (1) porphyry Cu–Au deposits, (2) magmatic Fe–Au deposits, (3) sedimentary polymetallic deposits, (4) polymetallic skarn deposits, and (5) palaeoplacers associated with karsts. The porphyry Cu–Au and polymetallic skarn deposits are associated with quartz–albite porphyry bodies. The Fe–Au and polymetallic sedimentary deposits are part of an ore-forming system that produced considerable Au in the Beiya area, and are characterised by low concentrations of La, Ti, and Co, and high concentrations of Y, Yb, and Sc.The Cenozoic porphyries in western Yunnan display increased alkalinity away from the Triassic Jinshajiang suture. Distribution of both the porphyries and sedimentary deposits in the Beiya area are interpreted to be related to partial melting in a disjointed region between upper mantle lithosphere of the Yangtze Plate and Gondwana continent, and lie within a shear zone between buried Palaeo-Tethyan oceanic lithosphere and upper mantle lithosphere, caused by the subduction and collision of India and Asia.     

Revised Mesozoic–Cenozoic orogenic architecture and gold metallogeny in the northern Circum-Pacific

The orogenic collages of the northern Circum-Pacific between Japan and Alaska revealed an endowment of about 450 Moz Au in various deposit types and diverse Mesozoic–Cenozoic tectonic settings. The area consists of predominantly late Paleozoic to Cenozoic turbidite to island arc terranes as well as Precambrian cratonic terranes that can be grouped into the Kolyma–Alaska, Kamchatka–Aleutian, and Nipponide collages. The latter can be linked via the Mongol–Okhotsk suture with the late Paleozoic to early Mesozoic terranes in the Mongolides.The early Yanshanian magmatic arc terranes in the fossil Kolyma–Alaska collage host copper–gold porphyry deposits, which have only recently received much attention. Exploration has revealed a large and growing gold endowment of more than 30 Moz Au in some individual deposits, with smaller role of epithermal deposits. This mineralization, formed at 140–125 Ma, is partly coeval with the collisions of magmatic arcs with the passive margin sequences of the Siberian craton and related granitoid magmatism. About 200 Moz of gold is known in the Kolyma–Alaska collage in the Mesozoic orogenic gold deposits and related Quaternary placers. The Central Kolyma, Indigirka, South Verkhoyansk, and North Chukotka subprovinces of the collage revealed an endowment of more than 10 Moz Au each. A similar and coeval event in the Mongolides in relation to the collision between Siberia and North China is largely reflected in still poorly dated intrusion-related gold deposits clustered along the Mongol–Okhotsk suture.The overlapping Yanshanian magmatic arcs in Transbaikalia and northeast China and the Okhotsk–Chukotka magmatic arc in the Russian Far East stitch the Kolyma–Alaska collage with the Paleozoic Central Asian supercollage and adjacent cratons. While the Okhotsk–Chukotka arc reveals a relatively simple and broad oroclinal pattern, the Yanshanian arcs in Mongolia, and NE China form a tightly deformed giant Z-shaped feature that was bent in response to the southward movement of the Siberian craton and northward translation of the Nipponides and North China craton to close the Mongol–Okhotsk suture in late Jurassic to Cretaceous times. The Yanshanian arcs host mostly small to medium-sized 100–70 Ma Au–Ag deposits, with the largest endowment discovered in the Baley district in Transbaikalia and at Kupol in the northern part of the Okhotsk–Chukotka arc. Some intrusion-related gold deposits were formed synchronously with this arc magmatism, with the largest known examples in the Tintina belt in Alaska formed at 104 and 93–91 Ma.The Kamchatka–Aleutian collage is still evolving in front of the westward-subducting Pacific plate. It's late Cretaceous to Paleogene magmatic arc rocks form immature island arc terranes, extending from the Aleutian islands towards the Nipponides via Kamchatka peninsula, Kuril islands and eastern Sakhalin. However, in the Nipponides, the Sikhote–Alin portion of the magmatic arc overlaps the Mesozoic turbidite terranes. The oroclinal pattern of this more than 8000 km-long magmatic arc indicates its westward translation in agreement with the movement of the Pacific plate so that the arc is presently colliding with itself along the island of Sakhalin, a seismically active intraplate lineament and a boundary between the Nipponide and Kamchatka–Aleutian collages. This magmatic arc is usually interpreted to be of intra-oceanic origin, with subsequent docking to Asia from the south; however, presence of the Sea of Okhotsk cratonic terrane between Sakhalin and Kamchatka suggests that it may be rather considered as an external arc system that separated from the rest of Asia due to backarc spreading events, therefore, forming the most external arc system at the active margin with the Pacific plate. The subduction-related events in the collage produced numerous late Mesozoic to Cenozoic 1–3 Moz gold epithermal deposit in Kamchatka and Sikhote–Alin as well as Au–Cu porphyry deposits, with currently largest gold endowment in the pre-Tertiary Pebble Copper deposit in Alaska. The westward translation of the Kamchatka–Aleutian collage might have controlled the emplacement of this porphyry deposit, as well as up to 30 Moz into intrusion-related gold deposits at 70–65 Ma in the Kuskokwim belt, immediately north from the porphyry cluster.     

Genesis of sediment-hosted stratiform copper–cobalt deposits, central African Copperbelt

The Neoproterozoic central African Copperbelt is one of the greatest sediment-hosted stratiform Cu–Co provinces in the world, totalling 140 Mt copper and 6 Mt cobalt and including several world-class deposits (10 Mt copper). The origin of Cu–Co mineralisation in this province remains speculative, with the debate centred around syngenetic–diagenetic and hydrothermal-diagenetic hypotheses.The regional distribution of metals indicates that most of the cobalt-rich copper deposits are hosted in dolomites and dolomitic shales forming allochthonous units exposed in Congo and known as Congolese facies of the Katangan sedimentary succession (average Co:Cu = 1:13). The highest Co:Cu ratio (up to 3:1) occurs in ore deposits located along the southern structural block of the Lufilian Arc. The predominantly siliciclastic Zambian facies, exposed in Zambia and in SE Congo, forms para-autochthonous sedimentary units hosting ore deposits characterized by lower a Co:Cu ratio (average 1:57). Transitional lithofacies in Zambia (e.g. Baluba, Mindola) and in Congo (e.g. Lubembe) indicate a gradual transition in the Katangan basin during the deposition of laterally correlative clastic and carbonate sedimentary rocks exposed in Zambia and in Congo, and are marked by Co:Cu ratios in the range 1:15.The main Cu–Co orebodies occur at the base of the Mines/Musoshi Subgroup, which is characterized by evaporitic intertidal–supratidal sedimentary rocks. All additional lenticular orebodies known in the upper part of the Mines/Musoshi Subgroup are hosted in similar sedimentary rocks, suggesting highly favourable conditions for the ore genesis in particular sedimentary environments. Pre-lithification sedimentary structures affecting disseminated sulphides indicate that metals were deposited before compaction and consolidation of the host sediment.The ore parageneses indicate several generations of sulphides marking syngenetic, early diagenetic and late diagenetic processes. Sulphur isotopic data on sulphides suggest the derivation of sulphur essentially from the bacterial reduction of seawater sulphates. The mineralizing brines were generated from sea water in sabkhas or hypersaline lagoons during the deposition of the host rocks. Changes of Eh–pH and salinity probably were critical for concentrating copper–cobalt and nickel mineralisation. Compressional tectonic and related metamorphic processes and supergene enrichment have played variable roles in the remobilisation and upgrading of the primary mineralisation.There is no evidence to support models assuming that metals originated from: (1) Katangan igneous rocks and related hydrothermal processes or; (2) leaching of red beds underlying the orebodies. The metal sources are pre-Katangan continental rocks, especially the Palaeoproterozoic low-grade porphyry copper deposits known in the Bangweulu block and subsidiary Cu–Co–Ni deposits/occurrences in the Archaean rocks of the Zimbabwe craton. These two sources contain low grade ore deposits portraying the peculiar metal association (Cu, Co, Ni, U, Cr, Au, Ag, PGE) recorded in the Katangan sediment-hosted ore deposits. Metals were transported into the basin dissolved in water.The stratiform deposits of Congo and Zambia display features indicating that syngenetic and early diagenetic processes controlled the formation of the Neoproterozoic Copperbelt of central Africa.     

Himalayan magmatism and porphyry copper–molybdenum mineralization in the Yulong ore belt, East Tibet

Summary ?The NW–SE-trending Yulong porphyry Cu–Mo ore belt, situated in the Sanjiang0 area of eastern Tibet, is approximately 400 km long and 35 to 70 km wide. Complex tectonic and magmatic processes during the Himalayan epoch have given rise to favorable conditions for porphyry-type Cu–Mo mineralization. Porphyry masses of the Himalayan epoch in the Yulong ore belt are distributed in groups along regional NW–SE striking tectonic lineaments. They were emplaced mainly into Triassic and Lower Permian sedimentary-volcanic rocks. K–Ar und U–Pb isotopic datings give an intrusion age range of 57–26 Ma. The porphyries are mainly of biotite monzogranitic and biotite syenogranitic compositions. Geological and geochemical data indicate that the various porphyritic intrusions in the belt had a common or similar magma source, are metaluminous to peraluminous, Nb–Y–Ba-depleted, I-type granitoids, and belong to the high-K calc-alkaline series. Within the Yulong subvolcanic belt a number of porphyry stocks bear typical porphyry type Cu–Mo alteration and mineralization. The most prominent porphyry Co–Mo deposits include Yulong, Malasongduo, Duoxiasongduo, Mangzong and Zhanaga, of which Yulong is one of the largest porphyry Cu (Mo) deposits in China with approximately 8 × 10⁶ tons of contained Cu metal. Hydrothermal alteration at Yulong developed around a biotite–monzogranitic porphyry stock that was emplaced within Upper Triassic limestone, siltstone and mudstone. The earliest alteration was due to the effects of contact metamorphism of the country rocks and alkali metasomatism (potassic alteration) within and around the porphyry body. The alteration of this stage was accompanied by a small amount of disseminated and veinlet Cu–Mo sulfide mineralization. Later alteration–mineralization zones form more or less concentric shells around the potassic zone, around which are distributed a phyllic or quartz–sericite–pyrite zone, a silicification and argillic zone, and a propylitic zone. Fluid inclusion data indicate that three types of fluids were involved in the alteration–mineralization processes: (1) early high temperature (660–420 °C) and high salinity (30–51 wt% NaCl equiv) fluids responsible for the potassic alteration and the earliest disseminated and/or veinlet Cu–Mo sulfide mineralization; (2) intermediate unmixed fluids corresponding to phyllic alteration and most Cu–Mo sulfide mineralization, with salinities of 30–50 wt% NaCl equiv and homogenization temperatures of 460–280 °C; and (3) late low to moderate temperature (300–160 °C) and low salinity (6–13 wt% NaCl equiv) fluids responsible for argillic and propylitic alteration. Hydrogen and oxygen isotopic studies show that the early hydrothermal fluids are of magmatic origin and were succeeded by increasing amounts of meteoric-derived convective waters. Sulfur isotopes also indicate a magmatic source for the sulfur in the early sulfide mineralization, with the increasing addition of sedimentary sulfur outward from the porphyry stock. Received August 29, 2001; revised version accepted May 1, 2002 Published online: November 29, 2002     

Miocene tectono-magmatic events and gold/poly-metal mineralizations in the Takab-Delijan belt,NW Iran

The Takab-Delijan (T-D) magmatic belt in NW Iran is a part of the Zagros orogenic belt which has imminence with epithermal, porphyry and carlin types of mineralization. This magmatic belt has been classified into 3 different phases by radiometric dating, including early (16–24 Ma), middle-late (10–12 Ma), and late Miocene (8 > Ma), among which the gold/basemetal mineralization is related to the first two phases in this area. The lower Miocene phase formed during the formation of a metamorphic core complex and upwelling basement in the form of synextentional magmatism. This magmatic event is shaped in an extensional regime within shallow marine basins which are correlated with the limestone formation of Qom Formation (QF) in a pre- to syncollisional environment. This volcanism (edifice) acceded to the surface rapidly via NW extensional faults and made stratovolcanic structures in the Takab and Delijan areas. These complexes have been formed by sequences of pyroclastic and lava flows with a composition of dacite to andesite and trachyandesite that are crosscut by microdiorite porphyritic subvolcanic. These epithermal-porphyr systems are related to the Cu ± Au ± Ag deposits. The main phase of gold mineralization is related to the magmatic phase with middle-late Miocene and the age of ~10.7–12 Ma. The geological environment for forming this magmatic phase is related to the extensional- compressional regime by the right-lateral strike-slip shear zone during shortening, folding, and thickening in syn- to post-collisional events. The magmatism is in the form of dacitic to rhyolitic domes on the surface. The gold/silver mineralization is associated with the hydrothermal metal suite of As, Sb, Te, Pb, and Zn, and it is characterized by very low Cu contents of subvolcanic. The final stage of tectonic evolution events is the thrusting of prior normal faults and exhumation in the late Miocene-Pliocene age which is together with post-collision magmatism.     

Modeling outflow from the Ernest Henry Fe oxide Cu–Au deposit: implications for ore genesis and exploration

The Ernest Henry Fe oxide Cu–Au (IOCG) deposit (>ca. 1.51 Ga) is hosted by breccia produced during the waning stages of an evolving hydrothermal system that formed a number of tens of metres to a kilometre scale, pre- and syn-ore alteration halos, although no demonstrable patterns have been attributed to fluids expelled through the outflow zones. However, the recognition of a population of hypersaline fluid inclusions representing the ‘spent’ fluids after Cu–Au deposition at Ernest Henry provides the basis to model the geochemical characteristics of the deposit's outflow zones. Geochemical modeling at 300 °C was undertaken at both high and low fluid/rock ratios via FLUSH models involving three host rock types: (1) granite, (2) calc–silicate rock, and (3) graphitic schist. In models run at high fluid/rock ratios, all rock types are essentially fluid-buffered, and produce an albite–quartz–hematite–barite-rich assemblage, although in low fluid–rock environments, the pH, redox, and geochemical character of the host rock exerts a greater influence on the mineralogy of the alteration assemblages (e.g., andradite, Fe–chlorite, and magnetite). Significant sulphide mineralization was predicted in graphitic schist where sphalerite occurred in both low- and high-porosity models, which indicates the possibility of an association between high-temperature IOCG mineralization and lower temperature base metal mineralization.Cooling experiments (from 300 to 100 °C) using the ‘spent fluids’ predict early high-T (300–200 °C) Na-, Ca-, Fe-, and Mn-rich, magnetite-bearing hydrothermal associations, whereas with cooling to below 200 °C, and with progressive fluid–rock interaction, the system produces rhodochrosite-bearing, hematite–quartz–muscovite–barite-rich assemblages. These results show that the radical geochemical and mineralogical changes associated with cooling and progressive fluid influx are likely to be accompanied by major transformations in the geophysical expression (e.g., spectral and magnetic character) of the alteration in the outflow zone, and highlight the potential link between magnetite- and hematite-bearing IOCG hydrothermal systems.     

The copper–gold and gold deposits of the Neoproterozoic Mara Rosa magmatic arc, central Brazil

Mineral exploration in the Neoproterozoic Goiás Magmatic Arc, central Brazil, dates back to the beginning of the 1970s. The Goiás Magmatic Arc extends for more than 1000 km in the western and northern parts of Goiás, into Tocantins, and disappears under the Phanerozoic Parnaíba Basin. Two main areas of Neoproterozoic juvenile crust, the Arenópolis and the Mara Rosa arcs, are identified. They lie in the southern and northern sectors of the Goiás Arc, respectively, and are relatively well studied.The Goiás Magmatic Arc dominantly comprises tonalitic/dioritic orthogneisses and narrow NNE-striking volcano-sedimentary belts. Recent U–Pb zircon data indicate crystallization of the tonalite protoliths in two main episodes: the older between ca. 890 and 790 Ma and the younger at 670–600 Ma. Nd isotopic data indicate the very primitive nature of the original magmas, with T_DM model ages mostly within the interval between 0.9 and 1.0 Ga and _Nd(T) values between +3.0 and +4.6. In the Chapada–Mara Rosa area, the supracrustal rocks form three individual NNE belts, known as the eastern, central and western belts, separated from each other by metatonalites/metadiorites.Gold and Cu–Au deposits of the Mara Rosa area occur in four main associations: (i) Au–Ag–Ba (e.g., Zacarias), which are interpreted as stratiform, disseminated volcanogenic deposits, (ii) Cu–Au (e.g., Chapada) which has been interpreted either as volcanogenic or as a porphyry-type deposit, (iii) Au-only deposits (e.g., Posse), interpreted as an epigenetic disseminated deposit controlled by a mesozonal shear zone and (iv) Au–Cu–Bi (e.g., the Mundinho occurrence), which are considered as vein-type deposits controlled by magnetite-rich diorites.The gold and Cu–Au deposits located within the Goiás Magmatic Arc can be spatially and temporally related to the magmatic evolution of a collisional belt or, in other words, to an orogenic gold deposit model. These models are based on the continuous evolution of collisional plates, which can be subdivided into four stages with distinct magmatic characteristics: (i) subduction stage, (ii) syntectonic collisional magmatism stage, (iii) post-tectonic collisional magmatism stage and (iv) post-orogenic extension stage.     

As–(Ag) sulphide veins in the Spanish Central System: further evidence for a hydrothermal event of Permian age

The Spanish Central System (SCS) has been subjected to repeated deformation and fluid flow events which have produced both sulphide-bearing and barren vein systems. Although several hydrothermal episodes took place between 300 and 100 Ma, fluid circulation during the Permian was especially important, giving rise to a range of different types of deposits. This study presents a multidisciplinary approach leading to the characterisation of the chemistry and age of the hydrothermal fluids that produced the As–(Ag) mineralised stockwork of Mónica mine (Bustaviejo, Madrid). Fluid inclusion data indicate the presence of two different fluids. An initial ore stage (I) formed from a low- to moderate salinity (3–8 wt.% eq. NaCl) H₂O–NaCl–CO₂–CH₄ fluid, at minimum trapping temperature of 350±15 °C and 0.3 kbar. A second H₂O–NaCl fluid is found in three types of fluid inclusions: a high temperature and low salinity type (340±20 °C; 0.8–3.1 wt.% eq. NaCl) also associated to ore stage I, a moderate temperature and very low salinity type (160–255 °C; 0–1.5 wt.% eq. NaCl) represented in ore stage III, and a very low temperature and hypersaline type (60–70 °C; 30–35 wt.% NaCl), unrelated to the mineralising stages and clearly postdating the previous types. ⁴⁰Ar–³⁹Ar dating on muscovite from the early As–Fe stage (I) has provided an age of 286±4 Ma, synchronous with the late emplacement phases of La Cabrera plutonic massif (288±5 Ma) and with other Permian hydrothermal events like Sn–W skarns and W–(Sn) sulphide veins. δ¹⁸O of water in equilibrium with stage I quartz (5.3–7.7‰), δD of water in equilibrium with coexisting muscovite (−16.0‰ to −2.0‰), and sulphide δ³⁴S (1.5–3.6‰) values are compatible with waters that leached metamorphic rocks. The dominant mechanism of the As–(Ag) deposition was mixing and dilution processes between aqueous–carbonic and aqueous fluids for stage I (As–Fe), and nearly isobaric cooling processes for stages II (Zn–Cu–Sn) and III (Pb–Ag). The origin and hydrothermal evolution of As–(Ag) veins is comparable to other hydrothermal Permian events in the Spanish Central System.