The absence of endogenic methane on Titan and its implications for the origin of atmospheric nitrogen

We calculate the D/H ratio of CH₄ from serpentinization on Titan to determine whether Titan’s atmospheric CH₄ was originally produced inside the giant satellite. This is done by performing equilibrium isotopic fractionation calculations in the CH₄-H₂O-H₂ system, with the assumption that the bulk D/H ratio of the system is equivalent to that of the H₂O in the plume of Enceladus. These calculations show that the D/H ratio of hydrothermally produced CH₄ would be markedly higher than that of atmospheric CH₄ on Titan. The implication is that Titan’s CH₄ is a primordial chemical species that was accreted by the moon during its formation. There are two evolutionary scenarios that are consistent with the apparent absence of endogenic CH₄ in Titan’s atmosphere. The first is that hydrothermal systems capable of making CH₄ never existed on Titan because Titan’s interior has always been too cold. The second is that hydrothermal systems on Titan were sufficiently oxidized so that C existed in them predominately in the form of CO₂. The latter scenario naturally predicts the formation of endogenic N₂, providing a new hypothesis for the origin of Titan’s atmospheric N₂: the hydrothermal oxidation of ¹⁵N-enriched NH₃. A primordial origin for CH₄ and an endogenic origin for N₂ are self-consistent, but both hypotheses need to be tested further by acquiring isotopic data, especially the D/H ratio of CH₄ in comets, and the ¹⁵N/¹⁴N ratio of NH₃ in comets and that of N₂ in one of Enceladus’ plumes.     

Nitrile gas chemistry in Titan’s atmosphere

This work presents the first study of the gaseous products resulting from the partial dissociation of methane and nitrogen in the PAMPRE experimental setup simulating Titan’s atmospheric chemistry.Using cryogenic trapping, the gaseous products generated from the chemical reactions occurring in the reactor have been trapped. Analyses of these products by gas chromatography coupled to mass spectrometry have allowed the detection and identification of more than 30 reaction products. Most of them are identified as nitrile species, accompanied by aliphatic hydrocarbons and a few aromatics compounds. The observed species are in agreement with the data from the recent Cassini-Huygens mission as well as from other laboratory setups capable of dissociating nitrogen and methane. This work emphasizes the probable importance of nitrogen-bearing compounds in the chemistry taking place in Titan’s atmosphere.Furthermore, a quantification of mono-nitriles with saturated alkyl chains has been performed relatively to hydrogen cyanide and shows a power law dependence in their concentration. This dependence is consistent with the Cassini-INMS data and Titan’s photochemical models.An empirical relationship has been extracted from our experimental data: [C_xH_2x−1N] = 100x⁻⁵, where x is the number of carbon atoms in the nitrile molecule. This relationship can be directly used in order to foretell the concentration of heavier nitriles induced by chemistry in Titan’s atmosphere.     

Titan’s atmosphere: An optimal gas mixture for aerosol production?

Here we present the first quantitative study of the gas to solid particle conversion in a Radio Frequency dusty plasma experiment simulating the complex atmospheric reactivity on Titan.Analogs of Titan’s aerosols have been produced in different N₂-CH₄ gas mixtures. Using in situ mass spectrometry, it has been found that, by varying the initial methane concentration, aerosols could be produced in methane steady state concentrations similar to Titan’s atmospheric conditions. In our experiment, an initial ∼5% methane concentration is necessary to ensure a ∼1.5% methane steady state concentration in the plasma.The tholin mass production rate has been quantified as a function of the initial methane concentration. A maximum was found for a steady state CH₄ concentration in agreement with Titan’s atmospheric CH₄ concentrations. At this maximum, the tholin C/N ratio is about 1.45 and the carbon gas to solid conversion yield is about 35%.We have modeled the mass production rate by a parabolic function, highlighting two competitive chemical regimes controlling the tholin production efficiency: an efficient growth process which is proportional to the methane consumption, and an inhibiting process which opposes the growth process and dominates it for initial methane concentrations higher than ∼5%. To explain these two opposite effects, we propose two mechanisms: one involving HCN patterns in the tholins for the growth process, and one involving the increasing amount of atomic hydrogen in the plasma as well as the increase in aliphatic contributions in the tholins for the inhibiting process. This study highlights new routes for understanding the chemical growth of the organic aerosols in Titan’s atmosphere.     

Shoreline retreat at Titan’s Ontario Lacus and Arrakis Planitia from Cassini Imaging Science Subsystem observations

Recent observations by Cassini’s Imaging Science Subsystem reveal that part of the shoreline of Titan’s Ontario Lacus has retreated by several kilometers and may indicate that the dark area that appeared at Arrakis Planitia (80°S, 120°W) in late 2004 has subsequently faded. These changes provide constraints on aspects of Titan’s methane cycle, as well as on the properties of Titan’s surface materials.     

Constraints on Titan’s topography through fractal analysis of shorelines

Titan’s north polar hydrocarbon lakes offer a unique opportunity to indirectly characterize the statistical properties of Titan’s landscape. The complexity of a shoreline can be related to the complexity of the landscape it is embedded in through fractal theory. We mapped the shorelines of 290 of the north polar titanian lakes in the Cassini synthetic aperture radar dataset. Out of these, we used a subset of 190 lake shorelines for our analysis. The fractal dimensions of the shorelines were calculated via two methods: the divider/ruler method and the box-counting method, at length scales of (1-10) km and found to average 1.27 and 1.32, respectively. The inferred power-spectral exponent of Titan’s topography (β) from theoretical and empirical relations is found to be ?2, which is lower than the values obtained from the global topography of the Earth or Venus. Some of the shorelines exhibit multi-fractal behavior (different fractal dimensions at different scales), which we interpret to signify a transition from one set of dominant surface processes to another. We did not observe any spatial variation in the fractal dimension with latitude; however we do report significant spatial variation of the fractal dimension with longitude. A systematic difference between the dimensions of orthogonal sections of lake shorelines is also noted, which signifies possible anisotropy in Titan’s topography. The topographic information thus gleaned can be used to constrain landscape evolution modeling to infer the dominant surface processes that sculpt the landscape of Titan.     

Elastic ice shells of synchronous moons: Implications for cracks on Europa and non-synchronous rotation of Titan

A number of synchronous moons are thought to harbor water oceans beneath their outer ice shells. A subsurface ocean frictionally decouples the shell from the interior. This has led to proposals that a weak tidal or atmospheric torque might cause the shell to rotate differentially with respect to the synchronously rotating interior. Applications along these lines have been made to Europa and Titan. However, the shell is coupled to the ocean by an elastic torque. As a result of centrifugal and tidal forces, the ocean would assume an ellipsoidal shape with its long axis aligned toward the parent planet. Any displacement of the shell away from its equilibrium position would induce strains thereby increasing its elastic energy and giving rise to an elastic restoring torque. In the investigation reported on here, the elastic torque is compared with the tidal torque acting on Europa and the atmospheric torque acting on Titan.Regarding Europa, it is shown that the tidal torque is far too weak to produce stresses that could fracture the ice shell, thus refuting an idea that has been widely advocated. Instead, it is suggested that the cracks arise from time-dependent stresses due to non-hydrostatic gravity anomalies from tidally driven, episodic convection in the satellite’s interior.Two years of Cassini RADAR observations of Titan’s surface have been interpreted as implying an angular displacement of ∼0.24° relative to synchronous rotation. Compatibility of the amplitude and phase of the observed non-synchronous rotation with estimates of the atmospheric torque requires that Titan’s shell be decoupled from its interior. We find that the elastic torque balances the seasonal atmospheric torque at an angular displacement ?0.05°, effectively coupling the shell to the interior. Moreover, if Titan’s surface were spinning faster than synchronous, the tidal torque tending to restore synchronous rotation would almost certainly be larger than the atmospheric torque. There must either be a problem with the interpretation of the radar observations, or with our basic understanding of Titan’s atmosphere and/or interior.     

Impact-induced N2 production from ammonium sulfate: Implications for the origin and evolution of N2 in Titan’s atmosphere

Chemical reactions and volatile supply through hypervelocity impacts may have played a key role for the origin and evolution of both planetary and satellite atmospheres. In this study, we evaluate the role of impact-induced N₂ production from reduced nitrogen-bearing solids proposed to be contained in Titan’s crust, ammonium sulfate ((NH₄)₂SO₄), for the replenishment of N₂ to the atmosphere in Titan’s history. To investigate the conversion of (NH₄)₂SO₄ into N₂ by hypervelocity impacts, we measured gases released from (NH₄)₂SO₄ that was exposed to hypervelocity impacts created by a laser gun. The sensitivity and accuracy of the measurements were enhanced by using an isotope labeling technique for the target. We obtained the efficiency of N₂ production from (NH₄)₂SO₄ as a function of peak shock pressure ranging from ∼8 to ∼45 GPa. Our results indicate that the initial and complete shock pressures for N₂ degassing from (NH₄)₂SO₄ are ∼10 and ∼25 GPa, respectively. These results suggest that cometary impacts on Titan (i.e., impact velocity v_i > ∼8 km/s) produce N₂ efficiently; whereas satellitesimal impacts during the accretion (i.e., v_i < 4 km/s) produce N₂ only inefficiently. Even when using the proposed small amount of (NH₄)₂SO₄ content in the crust (∼4 wt.%) (Fortes, A.D. et al., 2007. Icarus 188, 139-153), the total amount of N₂ provided through cometary impacts over 4.5 Ga reaches ∼2-6 times the present atmospheric N₂ (i.e., ∼7 × 10²⁰-2 × 10²¹ [mol]) based on the measured production efficiency and results of a hydrodynamic simulation of cometary impacts onto Titan. This implies that cometary impacts onto Titan’s crust have the potential to account for a large part of the present N₂ through the atmospheric replenishment after the accretion.     

Chemical reactions in the Titan’s troposphere during lightning

In the lower troposphere of the Titan the temperature is about 90 K, therefore the chemical production of compounds in the CH₄/N₂ atmosphere is extremely slow. However, atmospheric electricity could provide conditions at which chemical reactions are fast. This paper is based on the assumption that there are lightning discharges in the Titan’s lower atmosphere. The temporal temperature profile of a gas parcel after lightning was calculated at the conditions of 10 km above the Titan’s surface. Using this temperature profile, composition of the after-lightning atmosphere was simulated using a detailed chemical kinetic mechanism consisting of 1829 reactions of 185 species. The main reaction paths leading to the products were investigated. The main products of lighting discharges in the Titan’s atmosphere are H₂, HCN, C₂N₂, C₂H₂, C₂H₄, C₂H₆, NH₃ and H₂CN. The annual production of these compounds was estimated in the Titan’s atmosphere.     

The near-IR spectrum of Titan modeled with an improved methane line list

We have obtained spatially resolved spectra of Titan in the near-infrared J, H and K bands at a resolving power of ∼5000 using the near-infrared integral field spectrometer (NIFS) on the Gemini North 8 m telescope. Using recent data from the Cassini/Huygens mission on the atmospheric composition and surface and aerosol properties, we develop a multiple-scattering radiative transfer model for the Titan atmosphere. The Titan spectrum at these wavelengths is dominated by absorption due to methane with a series of strong absorption band systems separated by window regions where the surface of Titan can be seen. We use a line-by-line approach to derive the methane absorption coefficients. The methane spectrum is only accurately represented in standard line lists down to ∼2.1 μm. However, by making use of recent laboratory data and modeling of the methane spectrum we are able to construct a new line list that can be used down to 1.3 μm. The new line list allows us to generate spectra that are a good match to the observations at all wavelengths longer than 1.3 μm and allow us to model regions, such as the 1.55 μm window that could not be studied usefully with previous line lists such as HITRAN 2008. We point out the importance of the far-wing line shape of strong methane lines in determining the shape of the methane windows. Line shapes with Lorentzian, and sub-Lorentzian regions are needed to match the shape of the windows, but different shape parameters are needed for the 1.55 μm and 2 μm windows. After the methane lines are modeled our observations are sensitive to additional absorptions, and we use the data in the 1.55 μm region to determine a D/H ratio of 1.77 ± 0.20 × 10⁻⁴, and a CO mixing ratio of 50 ± 11 ppmv. In the 2 μm window we detect absorption features that can be identified with the ν₅ + 3ν₆ and 2ν₃ + 2ν₆ bands of CH₃D.     

Stability of methane clathrate hydrates under pressure: Influence on outgassing processes of methane on Titan

We have conducted high-pressure experiments in the H₂O-CH₄ and H₂O-CH₄-NH₃ systems in order to investigate the stability of methane clathrate hydrates, with an optical sapphire-anvil cell coupled to a Raman spectrometer for sample characterization. The results obtained confirm that three factors determine the stability of methane clathrate hydrates: (1) the bulk methane content of the samples; (2) the presence of additional gas compounds such as nitrogen; (3) the concentration of ammonia in the aqueous solution. We show that ammonia has a strong effect on the stability of methane clathrates. For example, a 10 wt.% NH₃ solution decreases the dissociation temperature of methane clathrates by 14-25 K at pressures above 5 MPa. Then, we apply these new results to Titan’s conditions. Dissociation of methane clathrate hydrates and subsequent outgassing can only occur in Titan’s icy crust, in presence of locally large amounts of ammonia and in a warm context. We propose a model of cryomagma chamber within the crust that provides the required conditions for methane outgassing: emplacement of an ice plume triggers the melting (if solid) or heating (if liquid) of large ammonia-water pockets trapped at shallow depth, and the generated cryomagmas dissociate surrounding methane clathrate hydrates. We show that this model may allow for the outgassing of significant amounts of methane, which would be sufficient to maintain the presence of methane in Titan’s atmosphere for several tens of thousands of years after a large cryovolcanic event.     

Impact craters on Titan

Five certain impact craters and 44 additional nearly certain and probable ones have been identified on the 22% of Titan’s surface imaged by Cassini’s high-resolution radar through December 2007. The certain craters have morphologies similar to impact craters on rocky planets, as well as two with radar bright, jagged rims. The less certain craters often appear to be eroded versions of the certain ones. Titan’s craters are modified by a variety of processes including fluvial erosion, mass wasting, burial by dunes and submergence in seas, but there is no compelling evidence of isostatic adjustments as on other icy moons, nor draping by thick atmospheric deposits. The paucity of craters implies that Titan’s surface is quite young, but the modeled age depends on which published crater production rate is assumed. Using the model of Artemieva and Lunine (2005) suggests that craters with diameters smaller than about 35 km are younger than 200 million years old, and larger craters are older. Craters are not distributed uniformly; Xanadu has a crater density 2-9 times greater than the rest of Titan, and the density on equatorial dune areas is much lower than average. There is a small excess of craters on the leading hemisphere, and craters are deficient in the north polar region compared to the rest of the world. The youthful age of Titan overall, and the various erosional states of its likely impact craters, demonstrate that dynamic processes have destroyed most of the early history of the moon, and that multiple processes continue to strongly modify its surface. The existence of 24 possible impact craters with diameters less than 20 km appears consistent with the Ivanov, Basilevsky and Neukum (1997) model of the effectiveness of Titan’s atmosphere in destroying most but not all small projectiles.     

Latitudinal variations in Titan’s methane and haze from Cassini VIMS observations

We analyze observations taken with Cassini’s Visual and Infrared Mapping Spectrometer (VIMS), to determine the current methane and haze latitudinal distribution between 60°S and 40°N. The methane variation was measured primarily from its absorption band at 0.61 μm, which is optically thin enough to be sensitive to the methane abundance at 20-50 km altitude. Haze characteristics were determined from Titan’s 0.4-1.6 μm spectra, which sample Titan’s atmosphere from the surface to 200 km altitude. Radiative transfer models based on the haze properties and methane absorption profiles at the Huygens site reproduced the observed VIMS spectra and allowed us to retrieve latitude variations in the methane abundance and haze. We find the haze variations can be reproduced by varying only the density and single scattering albedo above 80 km altitude. There is an ambiguity between methane abundance and haze optical depth, because higher haze optical depth causes shallower methane bands; thus a family of solutions is allowed by the data. We find that haze variations alone, with a constant methane abundance, can reproduce the spatial variation in the methane bands if the haze density increases by 60% between 20°S and 10°S (roughly the sub-solar latitude) and single scattering absorption increases by 20% between 60°S and 40°N. On the other hand, a higher abundance of methane between 20 and 50 km in the summer hemisphere, as much as two times that of the winter hemisphere, is also possible, if the haze variations are minimized. The range of possible methane variations between 27°S and 19°N is consistent with condensation as a result of temperature variations of 0-1.5 K at 20-30 km. Our analysis indicates that the latitudinal variations in Titan’s visible to near-IR albedo, the north/south asymmetry (NSA), result primarily from variations in the thickness of the darker haze layer, detected by Huygens DISR, above 80 km altitude. If we assume little to no latitudinal methane variations we can reproduce the NSA wavelength signatures with the derived haze characteristics. We calculate the solar heating rate as a function of latitude and derive variations of ∼10-15% near the sub-solar latitude resulting from the NSA. Most of the latitudinal variations in the heating rate stem from changes in solar zenith angle rather than compositional variations.     

Titan’s atomic hydrogen corona

Based on measurements performed by the Hydrogen Deuterium Absorption Cell (HDAC) aboard the Cassini orbiter, Titan’s atomic hydrogen exosphere is investigated. Data obtained during the T9 encounter are used to infer the distribution of atomic hydrogen throughout Titan’s exosphere, as well as the exospheric temperature.The measurements performed during the flyby are modeled by performing Monte Carlo radiative transfer calculations of solar Lyman-α radiation, which is resonantly scattered on atomic hydrogen in Titan’s exosphere. Two different atomic hydrogen distribution models are applied to determine the best fitting density profile. One model is a static model that uses the Chamberlain formalism to calculate the distribution of atomic hydrogen throughout the exosphere, whereas the second model is a Particle model, which can also be applied to non-Maxwellian velocity distributions.The density distributions provided by both models are able to fit the measurements although both models differ at the exobase: best fitting exobase atomic hydrogen densities of n_H = (1.5 ± 0.5) × 10⁴ cm⁻³ and n_H = (7 ± 1) × 10⁴ cm⁻³ were found using the density distribution provided by both models, respectively. This is based on the fact that during the encounter, HDAC was sensitive to altitudes above about 3000 km, hence well above the exobase at about 1500 km. Above 3000 km, both models produce densities which are comparable, when taking into account the measurement uncertainty.The inferred exobase density using the Chamberlain profile is a factor of about 2.6 lower than the density obtained from Voyager 1 measurements and much lower than the values inferred from current photochemical models. However, when taking into account the higher solar activity during the Voyager flyby, this is consistent with the Voyager measurements. When using the density profile provided by the particle model, the best fitting exobase density is in perfect agreement with the densities inferred by current photochemical models.Furthermore, a best fitting exospheric temperature of atomic hydrogen in the range of T_H = (150-175) ± 25 K was obtained when assuming an isothermal exosphere for the calculations. The required exospheric temperature depends on the density distribution chosen. This result is within the temperature range determined by different instruments aboard Cassini. The inferred temperature is close to the critical temperature for atomic hydrogen, above which it can escape hydrodynamically after it diffused through the heavier background gas.     

Wave constraints for Titan’s Jingpo Lacus and Kraken Mare from VIMS specular reflection lightcurves

Stephan et al. (Stephan, K. et al. [2010]. Geophys. Res. Lett. 37, 7104-+.) first saw the glint of sunlight specularly reflected off of Titan’s lakes. We develop a quantitative model for analyzing the photometric lightcurve generated during a flyby in which the specularly reflected light flux depends on the fraction of the solar specular footprint that is covered by liquid. We allow for surface waves that spread out the geographic specular intensity distribution. Applying the model to the VIMS T58 observations shows that the waves on Jingpo Lacus must have slopes of no greater than 0.15°, two orders of magnitude flatter than waves on Earth’s oceans. Combining the model with theoretical estimates of the intensity of the specular reflection allows a tighter constraint on the waves: ?0.05°. Residual specular signal while the specular point lies on land implies that either the land is wetted, the wave slope distribution is non-Gaussian, or that 5% of the land off the southwest edge of Jingpo Lacus is covered in puddles. Another specular sequence off of Kraken Mare acquired during Cassini’s T59 flyby shows rapid flux changes that the static model cannot reproduce. Points just 1 min apart vary in flux by more than a factor of two. The present dataset does not uniquely determine the mechanism causing these rapid changes. We suggest that changing wind conditions, kilometer-wavelength waves, or moving clouds could account for the variability. Future specular observations should be designed with a fast cadence, at least 6 points per minute, in order to differentiate between these hypotheses. Such new data will further constrain the nature of Titan’s lakes and their interactions with Titan’s atmosphere.     

Titan’s 5-μm window: observations with the Very Large Telescope

We report on mid-resolution (R∼2000) spectroscopic observations of Titan, acquired in November 2000 with the Very Large Telescope and covering the range 4.75-5.07 μm. These observations provide a detailed characterization of the CO (1-0) vibrational band, clearly separating for the first time individual CO lines (P10 to P19 lines of ¹³CO). They indicate that the CO/N₂ mixing ratio in Titan’s troposphere is 32±10 ppm. Comparison with photochemical models indicates that CO is not in a steady state in Titan’s atmosphere. The observations confirm that Titan’s 5-μm continuum geometric albedo is ∼0.06, and further indicates a ∼20% albedo decrease over 4.98-5.07 μm. Nonzero flux is detected at the 0.01 geometric albedo level in the saturated core of the ¹²CO (1-0) band, at 4.75-4.85 μm, providing evidence for backscattering on the stratospheric haze. Finally, emission lines are detected at 4.75-4.835 μm, coinciding in position with lines from the CO(1-0) and/or CO(2-1) bands. Matching them by thermal emission would require Titan’s stratosphere to be much warmer (by ∼ 25 K at 0.1 mbar) than indicated by the methane 7.7-μm emission and the Voyager radio-occultation. We show instead that a nonthermal mechanism, namely solar-excited fluorescence, is a more plausible source for these emissions. Improved observations and laboratory measurements on the vibrational-translational relaxation of CO are needed for further interpretation of these emissions in terms of a CO stratospheric mixing ratio.     

Titan’s cloud seasonal activity from winter to spring with Cassini/VIMS

Since Saturn orbital insertion in July 2004, the Cassini orbiter has been observing Titan throughout most of the northern winter season (October 2002–August 2009) and the beginning of spring, allowing a detailed monitoring of Titan’s cloud coverage at high spatial resolution with close flybys on a monthly basis. This study reports on the analysis of all the near-infrared images of Titan’s clouds acquired by the Visual and Infrared Mapping Spectrometer (VIMS) during 67 targeted flybys of Titan between July 2004 and April 2010.The VIMS observations show numerous sporadic clouds at southern high and mid-latitudes, rare clouds in the equatorial region, and reveal a long-lived cloud cap above the north pole, ubiquitous poleward of 60°N. These observations allow us to follow the evolution of the cloud coverage during almost a 6-year period including the equinox, and greatly help to further constrain global circulation models (GCMs). After 4 years of regular outbursts observed by Cassini between 2004 and 2008, southern polar cloud activity started declining, and completely ceased 1 year before spring equinox. The extensive cloud system over the north pole, stable between 2004 and 2008, progressively fractionated and vanished as Titan entered into northern spring. At southern mid-latitudes, clouds were continuously observed throughout the VIMS observing period, even after equinox, in a latitude band between 30°S and 60°S. During the whole period of observation, only a dozen clouds were observed closer to the equator, though they were slightly more frequent as equinox approached.We also investigated the distribution of clouds with longitude. We found that southern polar clouds, before disappearing in mid-2008, were systematically concentrated in the leading hemisphere of Titan, in particular above and to the east of Ontario Lacus, the largest reservoir of hydrocarbons in the area. Clouds are also non-homogeneously distributed with longitude at southern mid-latitudes. The n = 2-mode wave pattern of the distribution, observed since 2003 by Earth-based telescopes and confirmed by our Cassini observations, may be attributed to Saturn’s tides.Although the latitudinal distribution of clouds is now relatively well reproduced and understood by the GCMs, the non-homogeneous longitudinal distributions and the evolution of the cloud coverage with seasons still need investigation. If the observation of a few single clouds at the tropics and at northern mid-latitudes late in winter and at the start of spring cannot be further interpreted for the moment, the obvious shutdown of the cloud activity at Titan’s poles provides clear signs of the onset of the general circulation turnover that is expected to accompany the beginning of Titan’s northern spring. According to our GCM, the persistence of clouds at certain latitudes rather suggests a ‘sudden’ shift in near future of the meteorology into the more illuminated hemisphere. Finally, the observed seasonal change in cloud activity occurred with a significant time lag that is not predicted by our model. This may be due to an overall methane humidity at Titan’s surface higher than previously expected.     

The role of photochemical processes in evolution of the isotopic composition of the atmosphere of Titan

Molecular nitrogen, the main component of the modern atmosphere of Titan, may have formed without significant changes in the nitrogen and hydrogen isotopic composition from the clathrate hydrate of ammonia NH₃ · H₂O_SLD, which is the main accreted form of nitrogen. The most preferable transformation mechanism of NH₃ · H₂O_SLD into atmospheric N₂ is its thermal decomposition in the interior of Titan rather than the photochemical decomposition of ammonia in the upper atmosphere of early Titan. The photolysis of ammonia does not lead to a change in the isotopic composition of nitrogen, as all the nitrogen remains in Titan’s atmosphere. The photolysis of NH does not lead to a change in the isotopic composition of nitrogen in Titan’s atmosphere. Fractionation of hydrogen and nitrogen isotopes during the impacts of comets with Titan does not seem to be significant either. It will be possible to determine the dissociative fractionation factor, the original ratio ¹⁴N/¹⁵N, and the mass of Titan’s original atmosphere when fractionation of nitrogen isotopes in Titan’s atmosphere is examined in additional theoretical and experimental studies that take into account processes occurring during the formation of a system of Saturn’s satellites.     

Evidence for layered methane clouds in Titan’s troposphere

Layered methane clouds in Titan’s troposphere with an upper methane ice cloud, a lower liquid methane-nitrogen cloud, and a gap in between were suggested from in situ measurements and ground-based observations. Here we report laboratory investigations under conditions that mimic Titan’s troposphere providing a detailed picture of the cloud layers. A solid methane cloud with a nitrogen content of less than 14% and a liquid methane-nitrogen cloud with a nitrogen content of ∼30% form above ∼19 km and below ∼16 km altitude, respectively. Contrary to previous assertions, long-lived supercooled liquid methane-nitrogen droplets can be sustained in the region in between. The results demonstrate that a cloud gap could only form in the presence of high amounts of other traces species (ethane nuclei, tholin particles, etc.).     

Regional geomorphology and history of Titan’s Xanadu province

Titan’s enigmatic Xanadu province has been seen in some detail with instruments from the Cassini spacecraft. The region contains some of the most rugged, mountainous terrain on Titan, with relief over 2000 m. Xanadu contains evolved and integrated river channels, impact craters, and dry basins filled with smooth, radar-dark material, perhaps sediments from past lake beds. Arcuate and aligned mountain chains give evidence of compressional tectonism, yet the overall elevation of Xanadu is puzzlingly low compared to surrounding sand seas. Lineations associated with mountain fronts and valley floors give evidence of extension that probably contributed to this regional lowering. Several locations on Xanadu’s western and southern margins contain flow-like features that may be cryovolcanic in origin, perhaps ascended from lithospheric faults related to regional downdropping late in its history. Radiometry and scatterometry observations are consistent with a water-ice or water-ammonia-ice composition to its exposed, eroded, fractured bedrock; both microwave and visible to near-infrared (v-nIR) data indicate a thin overcoating of organics, likely derived from the atmosphere. We suggest Xanadu is one of the oldest terrains on Titan and that its origin and evolution have been controlled and shaped by compressional and then extensional tectonism in the icy crust and ongoing erosion by methane rainfall.     

An efficient, low-velocity, resonant mechanism for capture of satellites by a protoplanet

Numerical simulations of the gravitational scattering of planetesimals by a protoplanet reveal that a significant fraction of scattered planetesimals can become trapped as so-called quasi-satellites in heliocentric 1:1 co-orbital resonance with the protoplanet. While trapped, these resonant planetesimals can have deep low-velocity encounters with the protoplanet that result in temporary or permanent capture onto highly eccentric prograde or retrograde circumplanetary orbits. The simulations include solar nebula gas drag and use planetesimals with diameters ranging from ∼1 to ∼1000 km. Initial protoplanet eccentricities range from ep=0 to 0.15 and protoplanet masses range from 300 Earth-masses (M_⊕) down to 0.1M_⊕. This mass range effectively covers the final masses of all planets currently thought to be in possession of captured satellites—Jupiter, Saturn, Neptune, Uranus, and Mars. For protoplanets on moderately eccentric orbits (ep?0.1) most simulations show from 5-20% of all scattered planetesimals becoming temporarily trapped in the quasi-satellite co-orbital resonance. Typically, 20-30% of the temporarily trapped quasi-satellites of all sizes came within half the Hill radius of the protoplanet while trapped in the resonance. The efficiency of the resonance trapping combined with the subsequent low-velocity circumplanetary capture suggests that this trapped-to-captured transition may be important not only for the origin of captured satellites but also for continued growth of protoplanets.