Cross-sectional profiles of Baltis Vallis channel on Venus: Reconstructions from Magellan SAR brightness data

Baltis Vallis is a 6800-km long canali-type channel on Venus. Canali have a unique combination of morphological characteristics: extraordinary length, a single main conduit, and a degree of similarity to terrestrial rivers. These characteristics have given rise to intensive discussions on whether the origin of canali is erosional or constructional. Cross-sectional profiles of such channels reveal the detailed morphology of the structure and enable us to distinguish between these two possible origins; however, canali are just several kilometers wide and are therefore too small for the construction of cross-sectional profiles from Magellan altimetry data. Instead, we propose a new method for reconstructing short-wavelength topography using brightness data from Synthetic Aperture Radar images. We apply Muhleman's backscattering function to the backscatter intensity calculated from the brightness of Magellan Full-Resolution SAR Map images. The estimated vertical error of this new method is less than 5 m for a distance of 1 km across the channel. We studied 120 sites along an approximately 6000 km extent of Baltis Vallis. The channel profiles reveal that in nearly 90% of these sites, the bottom surface of the channel is lower than the surrounding plains by 20-100 m. Clear levee structures and intra-channel ridges are recognized in about 30 and 25%, respectively, of the sites analyzed within Baltis Vallis. Most of the levees occur in the upper segment of Baltis Vallis, while intra-channel ridges are mostly confined to the region between 1500 and 3000 km downstream from the probable source. The average depth and width of the channel are 46 m (standard deviation: 16 m) and 2.2 km (standard deviation: 0.4 km), respectively, and the depth profile along the channel is highly undulatory. The groove-like morphology and paucity of levee structures indicates an erosional origin. Furthermore, the observed undulations in depth along the channel indicate that Baltis Vallis most likely formed by mechanical erosion. The observed morphological transition from levees to intra-channel ridges suggests that the channel-forming processes changed across an area located approximately 1500 km from the source. Carbonatite is the most likely candidate material for the low-viscosity fluid that formed Baltis Vallis.     

Resurfacing styles and rates on Venus: assessment of 18 venusian quadrangles

We have quantitatively assessed the resurfacing sources and styles in eighteen mapped venusian quadrangles, about 30% of the venusian surface. Each quadrangle was split into 0.5° by 0.5° boxes, which were then identified as corona materials, large volcano materials (>100 km diameter), intermediate volcano materials (10-100 km), small edifice materials (<10 km), flow materials from rifts or fractures, plains without an identifiable source, impact crater materials and highly deformed materials, or data gaps. We find that coronae resurface approximately 21%, small edifices 22% and large volcanoes about 6% of the surfaces analyzed. Plains with no identifiable source account for an average of 35% of the surface assessed. Small edifices resurface on a scale of 10-100 s of km²; large edifices resurface areas of 10⁴-10⁵ km². Coronae have greatly varying amounts of associated volcanism, with some coronae producing negligible flow deposits and others producing deposits of 10⁴-10⁶ km². The areas identified as plains with no visible source occur on small scales (10² km²) to large scales (> 10⁵ km²). Our results indicate that the majority of plains resurfacing by volcanism can be tied to an identifiable source, that fields of small edifices contribute more to resurfacing than we had anticipated, and that resurfacing styles do not appear to have evolved over the time period represented by the surface geology in the mapped quadrangles. All of the units that we quantified occur throughout the histories of the regions mapped. We favor plains resurfacing to have occurred over at least 100 myr, which implies terrestrially reasonable resurfacing rates.     

Radar topography of domes on planetary surfaces

We investigate the possibility of measuring the heights and morphology of viscously emplaced domes using radar imagery. We accurately reproduce the known height and shape of a terrestrial salt dome, and estimate the heights of several venusian pancake domes to within a factor of two. The terrestrial salt dome is consistent with a Bingham flow, while the much larger venusian pancake domes are consistent with a Newtonian flow. Applying the same techniques to Ganesa Macula, a potential cryovolcanic dome on Titan, we estimate a height between 2.0-4.9 km. Additional factors such as variable roughness and composition might account for some of the discrepancies observed.     

Embayed intermediate volcanoes on Venus: Implications for the evolution of the volcanic plains

Volcanoes on Venus are classified according to size with studies on the stratigraphic position of large volcanoes proposing that most of the large volcanoes postdate the regional volcanic materials. Some studies regarding intermediate volcanoes proposed that some of these volcanic features could be large volcanoes with embayed flow aprons, a situation that would alter the previous stratigraphic considerations about large volcanoes on Venus.In this work I analyze the global population of embayed intermediate-size volcanoes and compare their summits with that of other edifices classified as large volcanoes. Intermediate-size volcanoes are considered embayed when: (1) flows from another source clearly overlap the volcano slopes, and (2) display scarps related to flank-failure processes but with the associated collapse deposits being absent (i.e. interpreted as covered). As result of the survey 88 embayed intermediate-size volcanoes have been catalogued and integrated into a Geographic Information System. These embayed volcanoes have summit sizes and characteristics similar to large volcanoes and, therefore, could be interpreted as possible large volcanoes with their flow aprons embayed. Embayment materials for these volcanoes include all the units present in the history of the volcanic plains and would indicate that this type of central volcanic edifice would occur throughout the geologic history recorded in the venusian plains.     

Stratigraphy, mineralogy, and origin of layered deposits inside Terby crater, Mars

The 174 km diameter Terby impact crater (28.0°S-74.1°E) located on the northern rim of the Hellas basin displays anomalous inner morphology, including a flat floor and light-toned layered deposits. An analysis of these deposits was performed using multiple datasets from Mars Global Surveyor, Mars Odyssey, Mars Express and Mars Reconnaissance Orbiter missions, with visible images for interpretation, near-infrared data for mineralogical mapping, and topography for geometry. The geometry of layered deposits was consistent with that of sediments that settled mainly in a sub-aqueous environment, during the Noachian period as determined by crater counts. To the north, the thickest sediments displayed sequences for fan deltas, as identified by 100 m to 1 km long clinoforms, as defined by horizontal beds passing to foreset beds dipping by 6-10° toward the center of the Terby crater. The identification of distinct sub-aqueous fan sequences, separated by unconformities and local wedges, showed the accumulation of sediments from prograding/onlapping depositional sequences, due to lake level and sediment supply variations. The mineralogy of several layers with hydrated minerals, including Fe/Mg phyllosilicates, supports this type of sedimentary environment. The volume of fan sediments was estimated as >5000 km³ (a large amount considering classical martian fan deltas such as Eberswalde (6 km³)) and requires sustained liquid water activity. Such a large sedimentary deposition in Terby crater is characteristic of the Noachian/Phyllosian period during which the environment favored the formation of phyllosilicates. The latter were detected by spectral data in the layered deposits of Terby crater in three distinct layer sequences. During the Hesperian period, the sediments experienced strong erosion, possibly enhanced by more acidic conditions, forming the current morphology with three mesas and closed depressions. Small fluvial valleys and alluvial fans formed subsequently, attesting to late fluvial processes dated as late Early to early Late Hesperian. After this late fluvial episode, the Terby impact crater was submitted to aeolian processes and permanent cold conditions with viscous flow features. Therefore, the Terby crater displays, in a single location, geologic features that characterize the three main periods of time on Mars, with the presence of one of the thickest sub-aqueous fan deposits reported on Mars. The filling of Terby impact crater is thus one potential “reference geologic cross-section” for Mars stratigraphy.     

Beta Regio, Venus: Evidence for uplift, rifting, and volcanism due to a mantle plume

Geophysical data have led to the interpretation that Beta Regio, a 2000×25000 km wide topographic rise with associated rifting and volcanism, formed due to the rise of a hot mantle diapir interpreted to be caused by a mantle plume. We have tested this hypothesis through detailed geologic mapping of the V-17 quadrangle, which includes a significant part of the Beta Regio rise, and reconnaissance mapping of the remaining parts of this region. Our analysis documents signatures of an early stage of uplift in the formation of the Agrona Linea fracture belts before the emplacement of regional plains and their deformation by wrinkle ridging. We see evidence that the Theia rift-associated volcanism occurred during the first part of post-regional-plains time and cannot exclude that it continued into later time. We also see evidence that Devana Chasma rifting was active during the first and the second parts of post-regional-plains time. These data are consistent with uplift, rifting and volcanism associated with a mantle diapir. Geophysical modeling shows that diapiric upwelling may continue at the present time. Together these data suggest that the duration of mantle diapir activity was as long as several hundred million years. The regional plains north of Beta rise and the area east and west of it were little affected by the Beta-forming plume, but the broader area (at least 4000 km across), whose center-northern part includes Beta Regio, could have experienced earlier uplift as morphologically recorded in formation of tessera transitional terrain.     

Geomorphologic mapping of the Menrva region of Titan using Cassini RADAR data

We made a detailed geomorphologic map of the Menrva region of Titan, using Cassini RADAR data as our map base. Using similar techniques and approaches that were applied to mapping Magellan radar images of Venus, and earlier, more generalized Titan maps, we were able to define and characterize 10 radar morphologic units, along with inferred dunes and fluvial channels, from the RADAR data. Structural features, such as scarps, ridges, and lineaments were also identified. Using principles of superposition, cross-cutting, and embayment relations we created a sequence of map units for this region. We interpret Menrva to be a 440 km wide degraded impact basin, in agreement with earlier studies by Elachi et al. (Elachi, C. et al. [2006]. Nature 441, 709-713) and Wood et al. (Wood, C.A., Lorenz, R., Kirk, R., Lopes, R., Mitchell, K., Stofan, E., and the Cassini RADAR Team [2010]. Icarus 206, 334-344), and identify it as the oldest feature in the map region. Exogenic processes including hydrocarbon fluid channelization forming the Elivagar Flumina channel network and dune fields resulting from aeolian activity are the current geologic processes dominating our map area, and these processes have contributed to the erosion of the crater’s ejecta field. There is evidence of multiple episodes of channel formation, erosion and burial by aeolian deposits, as observed elsewhere on Titan by e.g., Barnes et al. (Barnes, J.W. et al. [2005]. Icarus 195, 400-414). Channel outflow regions have morphologies suggestive of streams formed by flash floods, and dune fields are small and restricted rather than forming large dune seas, consistent with a desert-like environment for this region with low supply of hydrocarbon particles, also consistent with other studies by e.g., Lorenz et al. (Lorenz, R.D. et al. [2008a]. Planet. Space Sci. 56, 1132-1144). There is no evidence of cryovolcanism or non-impact-related tectonic activity in the Menrva region, although this region is too small to infer anything about the roles of these processes elsewhere on Titan. This work suggests detailed geomorphologic mapping can confidently be applied to Cassini RADAR data, and we suggest that more extensive mapping should be done using RADAR, ISS, and VIMS data geographically distributed across Titan to assess its usefulness for a future combined RADAR-ISS-VIMS-based global geologic map.     

Formation and evolution of the chaotic terrains by subsidence and magmatism: Hydraotes Chaos, Mars

The origin of the martian chaotic terrains is still uncertain; and a variety of geologic scenarios have been proposed. We provide topographic profiles of different chaos landscapes, notably Aureum and Hydraotes Chaos, showing that an initial shallow ground subsidence occurred at the first step of the chaos formation. We infer that the subsidence was caused by intrusion of a volcanic sill; which could have produced consequent melting as well as release of ground water from disrupted aquifer. Signs of a volcanic activity are observed on the floor of Hydraotes Chaos, a complex and deep depression located at the junction of three channels. The volcanic activity is represented by small, 0.5 to 1.5 km diameter, rounded cones with summit pits. The cone's size and morphology, as well as the presence of possible surrounding lava flows, suggest that they are primary volcanic cones similar to terrestrial cinder cones. The identification of volcanic activity on the deepest chaos, where the lower crustal thickness and the faults/fractures system contributed to the magma rising, reveals that magmatic activity, proved by the cones, and possibly help by structural activity, has been a major factor in the formation of chaotic terrains.     

Volcanic and structural history of the rocks exposed at Pickering Crater (Daedalia Planum, Mars)

In the western hemisphere of Mars Amazonian volcanism from Arsia Mons produced the smooth surfaces of Daedalia Planum and masks older rocks. Close to the southern termination of Daedalia Planum basement rocks are exposed in which are preserved craters that escaped or were only partially filled by this most recent volcanism. Pickering Crater is an approximately 130 km diameter crater. The youngest lavas flowed into this crater from Daedalia Planum by way of a NW rim breach, covering its western part. East of a well-defined flow front an older lava sequence with a distinctive platy surface and derived from a more proximal unestablished source to the northeast is exposed. Several units are identified within this sequence on the basis of surface texture, which is more subdued in progressively older rocks. Only local mapping of the flow front boundaries of these units is possible because of incomplete coverage by high resolution imagery. During emplacement of the older lavas a NE-SW striking en echelon graben system and parallel smaller troughs and dikes formed under inferred regional NW-SE extension. A much earlier strike-slip regime pre-dating the lavas exposed in the crater floor is postulated, based on the highly fretted nature of the rim of Pickering Crater and an elongated smaller crater to its northeast, approximately 40 km long in the NE-SW direction. The rims of these craters contrast with that of a smoother rimmed impact crater in the southeast that was excavated subsequent to strike-slip deformation but prior to the emplacement of platy surfaced lavas.     

A combined spectrophotometric and morphometric study of the lunar mare dome fields near Cauchy, Arago, Hortensius, and Milichius

In this study we examine the spectral and morphometric properties of the four important lunar mare dome fields near Cauchy, Arago, Hortensius, and Milichius. We utilize Clementine UV-vis multispectral data to examine the soil composition of the mare domes while employing telescopic CCD imagery to compute digital elevation maps in order to determine their morphometric properties, especially flank slope, height, and edifice volume. After reviewing previous attempts to determine topographic data for lunar domes, we propose an image-based 3D reconstruction approach which is based on a combination of photoclinometry and shape from shading. Accordingly, we devise a classification scheme for lunar mare domes which is based on a principal component analysis of the determined spectral and morphometric features. For the effusive mare domes of the examined fields we establish four classes, two of which are further divided into two subclasses, respectively, where each class represents distinct combinations of spectral and morphometric dome properties. As a general trend, shallow and steep domes formed out of low-TiO₂ basalts are observed in the Hortensius and Milichius dome fields, while the domes near Cauchy and Arago that consist of high-TiO₂ basalts are all very shallow. The intrusive domes of our data set cover a wide continuous range of spectral and morphometric quantities, generally characterized by larger diameters and shallower flank slopes than effusive domes. A comparison to effusive and intrusive mare domes in other lunar regions, highland domes, and lunar cones has shown that the examined four mare dome fields display such a richness in spectral properties and 3D dome shape that the established representation remains valid in a more global context. Furthermore, we estimate the physical parameters of dome formation for the examined domes based on a rheologic model. Each class of effusive domes defined in terms of spectral and morphometric properties is characterized by its specific range of values for lava viscosity, effusion rate, and duration of the effusion process. For our data set we report lava viscosities between about 10² and , effusion rates between 25 and , and durations of the effusion process between three weeks and 18 years. Lava viscosity decreases with increasing R₄₁₅/R₇₅₀ spectral ratio and thus TiO₂ content; however, the correlation is not strong, implying an important influence of further parameters like effusion temperature on lava viscosity.     

A lunar cryptomare dome near Mee H and Drebbel F

In this study, we examine the lunar mare dome Mee 1 situated near the craters Mee H and Drebbel F in a region showing evidence of ancient (pre-Orientale) mare volcanism and cryptomare deposits. Regional stratigraphic relations indicate that Mee 1 was formed prior to the Orientale impact at the beginning of the Imbrian period. Based on a combined photoclinometry and shape from shading technique applied to telescopic CCD images of the dome acquired under oblique illumination, we determined a diameter of Mee 1 of 25 km, a height of 250 m, a flank slope of 1.15^°, and a volume of . Based on rheologic modelling of the dome and a viscoelastic model of the feeder dike, we obtained a magma viscosity of , an effusion rate of , a duration of the effusion process of 1.6 years, a magma rise speed of , a width of the feeder dike of 32 m, and a horizontal dike length of 144 km. A comparison of Mee 1 with domes with similar morphometric properties, which are located near Milichius and inside the crater Petavius, reveals strong similarities with respect to the viscosity of the dome-forming magma and the feeder dike geometry, while the effusion rate and magma rise speed of Mee 1 are somewhat higher. The pronounced morphometric differences between Mee 1 and a smaller dome situated close to the crater Doppelmayer and characterised by a similar magma viscosity suggest that the growth of that dome was limited by exhaustion of the magma reservoir, while Mee 1 and the other larger domes display morphometric properties presumably coming closer to the cooling limit. The comparison of the ancient dome Mee 1 with the younger (Eratosthenian) edifices near Milichius and Doppelmayer suggests that the conditions in the upper mantle and the crust favoured high eruption volumes, effusion rates, and magma rise speeds, implying the occurrence of large magma reservoirs preventing the limitation of dome growth by magma exhaustion. On the other hand, we observe similar general morphometric, rheologic, and feeder dike characteristics and, thus, conclude that the formation conditions of lunar mare domes did not change fundamentally during the Imbrian period.     

The structural control of venusian polygonal impact craters

Pre-impact inhomogeneities of the target material sometimes cause the rim of an impact crater to be composed of several straight segments, instead of being circular. The venusian surface hosts 121 such polygonal impact craters (PICs)>12 km in diameter. Their straight rim segments are often parallel to the orientations of the surrounding tectonic structures, particularly those in tessera terrain and young rift zones, as well as the concentric components of coronae. This match is notably more distinct in distances less than two crater diameters between the PICs and the tectonic structures than further away. Surrounding wrinkle ridges, lineaments or radial components of volcano-tectonic features seem to have very little influence on the orientations of PIC rims. These results imply that the formation of straight segments of venusian PIC rims is controlled by pre-existing tectonic structures of the crust, but not by the apparently most surficial ones. Thus, PICs could be used to provide further constraints on the distribution and orientations of zones of weakness in the venusian crust.     

Phreato-magmatic dike-cryosphere interactions as the origin of small ridges north of Olympus Mons, Mars

Using images from the Mars Orbiter Camera, we have identified several linear ridges located 10-60 km north of the volcano Olympus Mons, Mars, at the edge of the Olympus Mons aureole materials. These ridges appear to be made of unconsolidated material by virtue of the many dust avalanche scars seen on their upper slopes. Based upon their morphology (several ridges have crater-like central depressions) and superposition relationships, the ridges appear to have formed very recently and post-date the formation of the youngest lava flows spilling over the northern escarpment of Olympus Mons. Several possible origins for the ridges, including an eolian, periglacial, or depositional origin have been considered, but we favor a ridge origin by a series of small explosive eruptions initiated by the intrusion of a dike into a volatile-rich substrate. To explore this process, we develop a numerical model for dike intrusion into a volatile-rich substrate that yields plausible dike widths between 2.4-3.5 m. The total volume of a single ridge system is ∼65×10⁶ m³, and we calculate that it may have taken only a few minutes to form. Viable solutions only exist when the thicknesses of the ice-rich layer is less than ∼1000-2000 m. This strongly suggests that the ice-rich region is limited in its vertical extent to a value of this order.     

Tectonic and stratigraphic implications of the relative ages of venusian plains and wrinkle ridges

A major ongoing controversy concerns the style of crustal evolution on Venus. At one extreme is a directional model that proposes a sequence of depositional and deformational events that occur at specific times in the evolution of the crust and that are global in extent. At the other extreme is a model that argues for different ages of these events in different places on the planet. A test of the directional model is here focused on whether wrinkle ridges formed at a single time in the recorded crustal history of Venus. Where sets of wrinkle ridges intersect it commonly is possible to determine that one set is older than the other. Also, the deformation responsible for wrinkle ridges is, in places, clearly progressive with respect to stratigraphic material units. These observations are not consistent with a specific single time for the formation of wrinkle ridges within the stratigraphic sequence. Within an area including about 1/3 of the surface of Venus 15% of craters that are younger than regional plains are older than wrinkle ridges, 85% are younger than wrinkle ridges. Taking 750 myr as a reasonable mean age for the regional plains, this implies that the mean age of wrinkle ridges is ∼110 myr younger than the mean age of plains. Solomon et al. (1999, Science 286, 87) propose that the emplacement of a large volume of plains lava would lead to a major atmospheric temperature increase. Their model predicts thermal stresses in the lithosphere that, at shallow depth, would reach peak compressive stresses in about 100 myr, a number very similar to the time lag between plains emplacement and wrinkle ridge formation indicated by the crater data. The thermal compressive stresses responsible for wrinkle ridges would be maintained at a level sufficient to deform basalt for at least 100 myr and possibly for as long as 350 myr. These time intervals are not really short compared to the mean age of the plains. Finally, because wrinkle ridges are demonstrably younger than the plains they deform, they cannot be related to the processes that formed the plains and thus should not be used to define a “plains with wrinkle ridges” unit.     

HiRISE images of yardangs and sinuous ridges in the lower member of the Medusae Fossae Formation, Mars

HiRISE images of the lower member of the Medusae Fossae Formation (MFF) were used to identify characteristics of two specific landforms that are well expressed in this particular geologic unit; yardangs and sinuous ridges. Yardangs are wind-eroded ridges that are usually confined to arid environments where the bedrock materials can be easily eroded by windblown sand. Yardangs are common in the lower member of MFF, where many individual yardangs show evidence of a caprock unit overlying a more friable unit, most consistent with an ignimbrite origin for these MFF deposits. Heights of the yardangs in the lower member materials are generally less than a few tens of meters, in contrast to yardangs in the thicker middle member MFF materials to the east of the study area. The yardangs may form in materials comprised of discrete depositional units, and there is good evidence that at least a dozen such depositional events contributed to the emplacement of the lower member of MFF. The lower member yardang heights indicate aeolian erosion has removed at least 19,000 km³ of lower member MFF materials. Sinuous ridges are elongate, positive-relief landforms that have been attributed to a variety of possible fluvial flow processes on Mars. Sinuous ridges are very common within exposures of the lower member of MFF. Multiple ridge types are present, but all forms seen at HiRISE scale are most consistent with some form of aqueous channel flow rather than other possible origins. The results from this initial examination of HiRISE images indicate the potential utility of comparing yardangs and sinuous ridges in the lower member to other members of MFF, although it remains to be determined if sinuous ridges are abundant in the younger MFF members.     

Surface roughness and geological mapping at subhectometer scale from the High Resolution Stereo Camera onboard Mars Express

The quantitative measurement of surface roughness of planetary surfaces at all scales provides insights into geological processes. A characterization of roughness variations at the scale of a few tens of meters is proposed that complements the analysis of local topographic data of the martian surface at kilometer scale, as achieved from the Mars Orbiter Laser Altimeter (MOLA) data, and at the subcentimeter scale using photometric properties derived from multi-angular observations. Relying on a Gabor filtering process, an algorithm developed in the context of image classification for the purpose of texture analysis has been adapted to handle data from the High Resolution Stereo Camera (HRSC). The derivation of roughness within a wavelength range of tens of meters, combined with analyses at even longer wavelengths, gives an original view of the martian surface. The potential of this approach is evaluated for different examples for which the geological processes are identified and the geological units are mapped and characterized in terms of roughness.     

Shallow radar (SHARAD) sounding observations of the Medusae Fossae Formation, Mars

The SHARAD (shallow radar) sounding radar on the Mars Reconnaissance Orbiter detects subsurface reflections in the eastern and western parts of the Medusae Fossae Formation (MFF). The radar waves penetrate up to 580 m of the MFF and detect clear subsurface interfaces in two locations: west MFF between 150 and 155° E and east MFF between 209 and 213° E. Analysis of SHARAD radargrams suggests that the real part of the permittivity is ∼3.0, which falls within the range of permittivity values inferred from MARSIS data for thicker parts of the MFF. The SHARAD data cannot uniquely determine the composition of the MFF material, but the low permittivity implies that the upper few hundred meters of the MFF material has a high porosity. One possibility is that the MFF is comprised of low-density welded or interlocked pyroclastic deposits that are capable of sustaining the steep-sided yardangs and ridges seen in imagery. The SHARAD surface echo power across the MFF is low relative to typical martian plains, and completely disappears in parts of the east MFF that correspond to the radar-dark Stealth region. These areas are extremely rough at centimeter to meter scales, and the lack of echo power is most likely due to a combination of surface roughness and a low near-surface permittivity that reduces the echo strength from any locally flat regions. There is also no radar evidence for internal layering in any of the SHARAD data for the MFF, despite the fact that tens-of-meters scale layering is apparent in infrared and visible wavelength images of nearby areas. These interfaces may not be detected in SHARAD data if their permittivity contrasts are low, or if the layers are discontinuous. The lack of closely spaced internal radar reflectors suggests that the MFF is not an equatorial analog to the current martian polar deposits, which show clear evidence of multiple internal layers in SHARAD data.     

Distribution and interplay of geologic processes on Titan from Cassini radar data

The Cassini Titan Radar Mapper is providing an unprecedented view of Titan’s surface geology. Here we use Synthetic Aperture Radar (SAR) image swaths (Ta-T30) obtained from October 2004 to December 2007 to infer the geologic processes that have shaped Titan’s surface. These SAR swaths cover about 20% of the surface, at a spatial resolution ranging from ∼350 m to ∼2 km. The SAR data are distributed over a wide latitudinal and longitudinal range, enabling some conclusions to be drawn about the global distribution of processes. They reveal a geologically complex surface that has been modified by all the major geologic processes seen on Earth - volcanism, tectonism, impact cratering, and erosion and deposition by fluvial and aeolian activity. In this paper, we map geomorphological units from SAR data and analyze their areal distribution and relative ages of modification in order to infer the geologic evolution of Titan’s surface. We find that dunes and hummocky and mountainous terrains are more widespread than lakes, putative cryovolcanic features, mottled plains, and craters and crateriform structures that may be due to impact. Undifferentiated plains are the largest areal unit; their origin is uncertain. In terms of latitudinal distribution, dunes and hummocky and mountainous terrains are located mostly at low latitudes (less than 30°), with no dunes being present above 60°. Channels formed by fluvial activity are present at all latitudes, but lakes are at high latitudes only. Crateriform structures that may have been formed by impact appear to be uniformly distributed with latitude, but the well-preserved impact craters are all located at low latitudes, possibly indicating that more resurfacing has occurred at higher latitudes. Cryovolcanic features are not ubiquitous, and are mostly located between 30° and 60° north. We examine temporal relationships between units wherever possible, and conclude that aeolian and fluvial/pluvial/lacustrine processes are the most recent, while tectonic processes that led to the formation of mountains and Xanadu are likely the most ancient.     

High outflow channels on Mars indicate Hesperian recharge at low latitudes and the presence of Canyon Lakes

A number of martian outflow channels were carved by discharges from large dilational fault zones. These channels were sourced by groundwater, not surface water, and when observed on high-standing plateaus they provide indicators of elevated paleo-groundwater levels. We identify three outflow channels of Hesperian age that issued from a 750-km-long fault zone extending from Candor Chasma to Ganges Chasma. Two of these channels, Allegheny Vallis and Walla Walla Vallis, have sources >2500 m above the topographic datum, too high to be explained by discharge from a global aquifer that was recharged solely in the south polar region. The indicated groundwater levels likely required regional sources of recharge at low latitudes. The floodwaters that erupted from Ophir Cavus to form Allegheny Vallis encountered two ridges that restricted the flow, forming temporary lakes. The flow probably breached or overtopped these obstructions quickly, catastrophically draining the lakes and carving several scablands. After the last obstacle had been breached, a single main channel formed that captured all subsequent flow. We performed hydrologic analyses of this intermediate phase of the flooding, prior to incision of the channel to its present depth. Using floodwater depths of 30-60 m, we calculated flow velocities of 6-15 m s⁻¹ and discharges in the range of . Locally higher flow velocities and discharges likely occurred when the transient lakes were drained. Variable erosion at the channel and scabland crossing of MOLA pass 10644 suggests that the upper 25-30 m may consist of poorly consolidated surface materials underlain by more cohesive bedrock. We infer that an ice-covered lake with a surface elevation >2500 m probably existed in eastern Candor Chasma because this canyon is intersected by the Ophir Catenae fault system from which Allegheny Vallis and Walla Walla Vallis originated. We introduce a new hydrology concept for Mars in which the groundwater system was augmented by recharge from canyon lakes that were formed when water was released by catastrophic melting of former ice sheets in Tharsis by effusions of flood basalts. This model could help to reconcile the expected presence of a thick cryosphere during the Hesperian with the abundant evidence for groundwater as a source for some of the circum-Chryse outflow channels.     

Cassini SAR, radiometry, scatterometry and altimetry observations of Titan’s dune fields

Large expanses of linear dunes cover Titan’s equatorial regions. As the Cassini mission continues, more dune fields are becoming unveiled and examined by the microwave radar in all its modes of operation (SAR, radiometry, scatterometry, altimetry) and with an increasing variety of observational geometries. In this paper, we report on Cassini’s radar instrument observations of the dune fields mapped through May 2009 and present our key findings in terms of Titan’s geology and climate. We estimate that dune fields cover ∼12.5% of Titan’s surface, which corresponds to an area of ∼10 million km², roughly the area of the United States. If dune sand-sized particles are mainly composed of solid organics as suggested by VIMS observations (Cassini Visual and Infrared Mapping Spectrometer) and atmospheric modeling and supported by radiometry data, dune fields are the largest known organic reservoir on Titan. Dune regions are, with the exception of the polar lakes and seas, the least reflective and most emissive features on this moon. Interestingly, we also find a latitudinal dependence in the dune field microwave properties: up to a latitude of ∼11°, dune fields tend to become less emissive and brighter as one moves northward. Above ∼11° this trend is reversed. The microwave signatures of the dune regions are thought to be primarily controlled by the interdune proportion (relative to that of the dune), roughness and degree of sand cover. In agreement with radiometry and scatterometry observations, SAR images suggest that the fraction of interdunes increases northward up to a latitude of ∼14°. In general, scattering from the subsurface (volume scattering and surface scattering from buried interfaces) makes interdunal regions brighter than the dunes. The observed latitudinal trend may therefore also be partially caused by a gradual thinning of the interdunal sand cover or surrounding sand sheets to the north, thus allowing wave penetration in the underlying substrate. Altimetry measurements over dunes have highlighted a region located in the Fensal dune field (∼5° latitude) where the icy bedrock of Titan is likely exposed within smooth interdune areas. The hemispherical assymetry of dune field properties may point to a general reduction in the availability of sediments and/or an increase in the ground humidity toward the north, which could be related to Titan’s asymmetric seasonal polar insolation. Alternatively, it may indicate that either the wind pattern or the topography is less favorable for dune formation in Titan’s northern tropics.