Mars Exploration Rover candidate landing sites as viewed by THEMIS

The analysis of six landing sites that were candidates for the two NASA Mars Exploration Rovers (MER) benefited from recently available image data from the Thermal Emission Imaging Spectrometer (THEMIS) onboard the 2001 Mars Odyssey spacecraft. The combination of daytime and nighttime thermal infrared images from THEMIS supplemented by additional data sets has lead to new or expanded insights into the nature of each landing site. In Meridiani Planum, a layer of lighter-toned, higher thermal inertia material is observable just below the hematite-bearing layer. Gusev Crater displays a more complex stratigraphy than previously observed, including an upper layer with lobate margins. The highest inertia unit of southern Isidis Planitia is confined to topographic lows in the rim/basin margin and does not appear to be due to highland material transported onto the basin floor. The enigmatic, ovoid, blocky terrain on the floor of Melas Chasma displays higher thermal inertia than its surroundings, an indication that it contains coarser or more indurated material than the adjacent aeolian bedforms. The myriad channels of Athabasca Valles display distinctive thermal signatures despite the presence of a bright layer of dust covering the region. The presence of alluvial fans produced from spur-and-gulley erosion of the walls of Eos Chasma demonstrates that mass movements have occurred following the canyon scouring floods.     

Composition and thermal inertia of the Mawrth Vallis region of Mars from TES and THEMIS data

Clay mineral-bearing deposits previously discovered on Mars with near infrared (λ=0.3-5 μm) remote sensing data are of major significance for understanding the aqueous history, geological evolution, and past habitability of Mars. In this study, we analyzed the thermal infrared (λ=6-35 μm) surface properties of the most extensive phyllosilicate deposit on Mars: the Mawrth Vallis area. Clay mineral-bearing units, which in visible images appear to be relatively light-toned, layered bedrock, have thermal inertia values ranging from 150 to 460 J m⁻² K⁻¹ s^−1/2. This suggests the deposits are composed of a mixture of rock with sand and dust at 100-meter scales. Dark-toned materials that mantle the clay-bearing surfaces have thermal inertia values ranging from 150 to 800, indicating variable degrees of rockiness or induration of this younger sedimentary or pyroclastic unit. Thermal Emission Spectrometer (TES) spectra of the light-toned rocks were analyzed with a number of techniques, but none of the results shows a large phyllosilicate component as has been detected in the same surfaces with near-infrared data. Instead, TES spectra of light-toned surfaces are best modeled by a combination of plagioclase feldspar, high-silica materials (similar to impure opaline silica or felsic glass), and zeolites. We propose three hypotheses for why the clay minerals are not apparent in thermal infrared data, including effects due to surface roughness, sub-pixel mixing of multiple surface temperatures, and low absolute mineral abundances combined with differences in spatial sampling between instruments. Zeolites modeled in TES spectra could be a previously unrecognized component of the alteration assemblage in the phyllosilicate-bearing rocks of the Mawrth Vallis area. TES spectral index mapping suggests that (Fe/Mg)-clays detected with near infrared data correspond to trioctahedral (Fe²⁺) clay minerals rather than nontronite-like clays. The average mineralogy and geologic context of these complex, interbedded deposits suggests they are either aqueous sedimentary rocks, altered pyroclastic deposits, or a combination of both.     

Analysis of phyllosilicate deposits in the Nili Fossae region of Mars: Comparison of TES and OMEGA data

Diverse phyllosilicate deposits discovered previously in the Nili Fossae region with near infrared reflectance data are a window into the complex history of aqueous alteration on Mars. In this work, we used thermal infrared data from the Thermal Emission Spectrometer (TES) in combination with near infrared data from the Observatoire pour la Minéralogie, l’Eau, les Glaces, et l’Activité (OMEGA) to better constrain the mineralogy and geologic origin of these deposits. We developed a TES spectral index for identification of clay minerals, which correctly identifies the phyllosilicates in the Nili Fossae area and points to several other interesting deposits in the Syrtis Major region. However, detailed inspection of the TES spectral features of Nili Fossae phyllosilicates shows a feature at low wavenumbers (350-550 cm⁻¹) that is not an exact match to any specific Fe³⁺-, Al-, or Mg-rich phyllosilicate phase. Instead, the feature is more similar to basaltic glass and may indicate that the phyllosilicates in this region are: (1) rich in Fe²⁺ (based on similarity to trends seen in laboratory data of clay minerals), (2) poorly crystalline/extremely disordered, and/or (3) present within a matrix of actual basalt glass. This feature is similar to spectral features seen in altered rocks in the Columbia Hills region of Gusev Crater by previous authors. By calibrating measured spectral index values against mathematical spectral mixtures of typical martian dark surfaces and known abundances of alteration minerals, we are able to estimate an enrichment in abundance of alteration minerals in the altered surfaces. Many dark, Noachian deposits in the Nili Fossae area are enriched phyllosilicates by 20-30% (±10-15%) relative to dark, volcanic surfaces in the same region. The distribution and abundance of these phases indicates that alteration in the region was pervasive, but did not completely erase the original mineralogy of what was likely an Fe-rich basalt protolith. As a group, the Nili Fossae phyllosilicate deposits are fundamentally different from those found in the Mawrth Vallis region. Nili Fossae deposits have strong thermal infrared features related to admixed pyroxene, plagioclase, and occasionally olivine, whereas the Mawrth Vallis deposits contain no mafic minerals. Comparison of TES and OMEGA data also illustrates some more general differences between the datasets, including the impact of physical character of the martian surface on detectability of minerals in each spectral range.     

Surficial properties in Melas Chasma, Mars, from Mars Odyssey THEMIS data

We examine the nature of the surface layer in a small area of the Melas Chasma region as determined from high-resolution thermal and visible Mars Odyssey Thermal Emission Imaging System (THEMIS) data as well as how our conclusions compare to past analyses. At THEMIS resolution, the thermal structure is dominated by local control and all significant thermal variations can be linked to morphology. Thus, THEMIS provides us with detailed images that contain thermophysical information as well, allowing us to create a surficial geologic map intended to reflect the surface structure of the region. Eight units have been defined: (i) blanketed plateaus with thermally distinct craters and fractures, (ii) blanketed canyon walls with rocky edges, (iii) indurated and/or rocky canyon wall slide material partially covered by aeolian material, (iv) an anomalous wall region with fluvial-like depressions partially filled with particulate material, (v) indurated and/or rocky ridged and non-ridged canyon floor landslide material mingled with aeolian material, (vi) sand sheets, (vii) indurated and/or rocky rounded blocks intermingled with small areas of aeolian material, and (viii) transverse dunes. The THEMIS thermal data support conclusions from previous studies but also reveal much more structure than was seen in the past. We have found that all significant thermal variations in this region can be linked to morphology but all morphological variations cannot be linked to significant thermal variations. THEMIS visible images provide an intermediate resolution that bridges the gap between MOC and Viking and allow for a more meaningful interpretation of the geologic context of a region. Surfaces indicate that landslides were an important geologic process long ago, shaping the canyon walls and floor, while aeolian processes have subsequently altered the surface layer in many locations and may still be active.     

Surficial properties in Gale Crater, Mars, from Mars Odyssey THEMIS data

We examine the nature of the surface layer in Gale Crater as determined from high-resolution thermal and visible Mars Odyssey Thermal Emission Imaging System (THEMIS) data as well as how our conclusions compare to past analyses. At THEMIS resolution, the thermal surface structure is dominated by local control, thus providing us with detailed images that contain thermophysical information as well. Using these data sets we have created a map of the area, defining units based primarily on their geomorphology as determined from the daytime thermal and visible images and then using the nighttime thermal data to interpret the nature of the surface layer within each unit. Seven units have been defined: (i) partially blanketed knobby plateaus, (ii) crater walls with terrain similar to that on the plateaus on the upper half and exposed, rocky surfaces on the lower half, (iii)-(v) three floor units with varying combinations of bedrock and indurated and/or particulate deposits, (vi) sand sheets, and (vii) a central mound, consisting of indurated and/or rocky material forming layers, terraces, and slides, covered by particulate material that tapers in thickness downslope. Additionally, dozens of channels have been observed on the crater walls and central mound. The results indicate that aeolian processes have played a major role in shaping much of the present surface layer within Gale and may still be active today. Because of the dramatic size and structure of Gale, the winds are most likely controlled by the local topography. Additionally, the presence and frequency of channels within Gale bolster hypotheses involving aqueous episodes in the history of the crater.     

Evidence for weathering on early Mars from a comparison with terrestrial weathering profiles

Phyllosilicates on Mars are widespread in the ancient crust suggesting the presence of liquid water at the martian surface and therefore warmer conditions during its early history. However, the role of the ancient climate in the alteration process, which produced these phyllosilicates, remains under debate, because similar mineral assemblages can be produced by hydrothermal alteration at depth. This paper focuses on the origin of coincident outcrops of Fe/Mg bearing phyllosilicates and Al-bearing phyllosilicates, which are observed in several regions of Mars. We performed a detailed mineralogical comparison between a section in Nili Fossae, Mars, and a weathering profile located at Murrin Murrin, Western Australia. The Murrin Murrin profile is developed in Archaean serpentinized peridotite massifs over a ∼40 m thick sequence. It has three alteration zones: the serpentine mineral saprolite is found at the bottom, immediately overlain by Fe/Mg-bearing smectites and then Al-bearing phyllosilicates (kaolinite) mixed with iron hydroxides. This example illustrates how Al-dominated minerals can derive from the alteration of initially Al-poor ultramafic rocks by the intense leaching of Mg²⁺. This mineralogical sequence is very similar to that detected locally in Nili Fossae by orbital spectroscopy. By analogy, we propose that the mineral assemblage detected on Mars is the result of long-term weathering, and thus could be the best evidence of past weathering as a direct result of a climate significantly warmer than at present.     

Silica-rich deposits and hydrated minerals at Gusev Crater, Mars: Vis-NIR spectral characterization and regional mapping

The Mars Exploration Rover (MER) Spirit has discovered surprisingly high concentrations of amorphous silica in soil and nodular outcrops in the Inner Basin of the Columbia Hills. In Pancam multispectral observations, we find that an absorption feature at the longest Pancam wavelength (1009 nm) appears to be characteristic of these silica-rich materials; however, spectral analyses of amorphous silica suggest that the ∼1009 nm spectral feature is not a direct reflection of their silica-rich nature. Based on comparisons with spectral databases, we hypothesize that the presence of H₂O or OH, either free (as water ice), adsorbed or bound in a mineral structure, is responsible for the spectral feature observed by Pancam. The Gertrude Weise soil, which is nearly pure opaline silica, may have adsorbed water cold-trapped on mineral grains. The origin of the ∼1009 nm Pancam feature observed in the silica-rich nodular outcrops may result from the presence of additional hydrated minerals (specific sulfates, halides, chlorides, sodium silicates, carbonates or borates). Using the ∼1009 nm feature with other spectral parameters as a “hydration signature” we have mapped the occurrence of hydrated materials along the extent of Spirit’s traverse across the Columbia Hills from West Spur to Home Plate (sols 155-1696). We have also mapped this hydration signature across large panoramic images to understand the regional distribution of materials that are spectrally similar to the silica-rich soil and nodular outcrops. Our results suggest that hydrated materials are common in the Columbia Hills.     

Laboratory simulations of Mars aqueous geochemistry

We report on laboratory experiments in which we allowed an SNC-derived mineral mix to react with pure water under a simulated Mars atmosphere for 7 months. These experiments were performed at one bar and at three different temperatures in order to simulate the subsurface conditions that most likely exist where liquid water and rock interact on Mars today. The dominant cations dissolved in the solutions we produced, which may be characterized as dilute brines, are Ca²⁺, Mg²⁺, Al³⁺, and Na⁺, while the major anions are dissolved C, F⁻, SO²⁻₄ and Cl⁻. Typical solution pH was in the range of 4.2-6.0. Abundance patterns of elements in our synthetic sulfate-chloride brines are distinctly unlike those of terrestrial ocean water or continental waters, however, they are quite similar to those measured in the martian fines at the Mars Pathfinder and Viking 1 and 2 Landing sites. This suggests that salts present in the martian regolith may have formed over time as a result of the interaction of surface or subsurface liquid water with basalts in the presence of a martian atmosphere similar in composition to that of today. If most of the mobile surface layer was formed during the Noachian when erosion rates were much higher than at present, and if this layer is homogeneous in salt composition, the total amount of salt in the martian fines is approximately the same as in the Earth's oceans. The minimum quantity of circulating water necessary to deposit this amount of salt is approximately equivalent to a global layer 625 m deep.     

Mineralogical constraints on the high-silica martian surface component observed by TES

The Thermal Emission Spectrometer (TES) has observed a high-silica material in the dark regions of Mars that is spectrally similar to obsidian glass and may have a volcanic origin. An alternate interpretation is that the spectrally amorphous material consists of clay minerals or some other secondary material, formed by chemical alteration of surface rocks. The regions where this material is observed (e.g., Acidalia Planitia) have relatively high spectral contrast, suggesting that the high-silica material exists as coarse particulates, indurated soils or cements, within rocks, or as indurated coatings on rock surfaces. The geologic interpretation of this spectral result has major implications for understanding magmatic evolution and weathering processes on Mars. One of the complications in interpreting spectral observations of glasses and clay minerals is that both are structurally and compositionally complex. In this study, we perform a detailed spectroscopic analysis of indurated smectite clay minerals and relate their thermal emission spectral features to structural and crystal chemical properties. We examine the spectral similarities and differences between smectite clay minerals and obsidian glass from a structural-chemical perspective, and make further mineralogical interpretations from previous TES results. The results suggest that neither smectite clays nor any clay mineral with similar structural and chemical properties can adequately explain TES observations of high-silica materials in some martian dark regions. If the spectrally amorphous materials observed by TES do represent an alteration product, then these materials are likely to be poorly crystalline aluminosilicates. While all clay minerals have Si/O ratios ?0.4, the position of the emissivity minimum at Mars suggests a Si/O ratio of 0.4-0.5. The spectral observation could be explained by the existence of a silica-rich alteration product, such as Al- or Fe-bearing opal, an intimate physical mixture of relatively pure silica and other aluminosilicates (such as clay minerals or clay precursors), or certain zeolites. The chemical alteration of basaltic rocks on Mars to phyllosilicate-poor, silica-rich alteration products provides a geologically reasonable and consistent explanation for the global TES surface mineralogical results.     

Mineralogy of the Phoenix landing site from OMEGA observations and how that relates to in situ Phoenix measurements

We present an analysis comparing observations acquired by the Mars Express Observatoire pour la Minéralogie l’Eau, les Glaces et l’Activité (OMEGA) and Phoenix lander measurements. Analysis of OMEGA data provides evidence for hydrous and ferric phases at the Phoenix landing site and the surrounding regions. The 3 μm hydration band deepens with increasing latitude, along with the appearance and deepening of a 1.9 μm H₂O band as latitude increases ∼60° polewards. A water content of 10-11% is derived from the OMEGA data for the optical surface at the Phoenix landing site compared to 1-2% derived for subsurface soil by Phoenix lander measurements. The hydration of these regions is best explained by surface adsorbed water onto soil grains. No evidence for carbonate or perchlorate-bearing phases is evident from OMEGA data, consistent with the relatively small abundances of these phases detected by Phoenix. The identification of spectral features consistent with hydrated phases (possibly zeolites) from OMEGA data covering regions outside the landing site and the ubiquitous ferric absorption edge suggest that chemical weathering may play a role in the arctic soils.     

Surface and near-surface atmospheric temperatures for the Mars Exploration Rover landing sites

Downward-looking spectra of the martian surface from the Miniature Thermal Emission spectrometer (Mini-TES), onboard each of the two Mars Exploration Rovers, are modeled in order to retrieve surface and near-surface atmospheric temperatures. By fitting the observed radiance in the vicinity of the 15-μm CO₂ absorption feature, the surface temperature and the near-surface atmospheric temperature, approximately 1.1 m above the surface, are determined. The temperatures from the first 180 sols (martian days) of each surface mission are used to characterize the diurnal dependence of temperatures. The near-surface atmospheric temperatures are consistently 20 K cooler than the surface temperatures in the warmest part of each sol, which is 1300-1400 LTST (local true solar time) depending on the location. Seasonal cooling trends are seen in the data by displaying the temperatures as a function of sol. Long ground stares, 8.5 min in duration, show as much as 8 K fluctuation in the near-surface atmospheric temperatures during the early afternoon hours when the near-surface atmosphere is unstable.     

Identification of the Ca-sulfate bassanite in Mawrth Vallis, Mars

The region surrounding the Mawrth Vallis outflow channel on Mars hosts thick layered deposits containing diverse phyllosilicate minerals. Here we report detection of the Ca-sulfate bassanite on the outflow channel floor, requiring a more complex aqueous chemistry than previously inferred for this region. The sulfate-bearing materials underlie phyllosilicate-bearing strata, and provide an opportunity for testing proposed models of martian geochemical evolution with a future landed mission.     

A search for basaltic-to-intermediate glasses on Mars: Assessing martian crustal mineralogy

Multiple datasets have demonstrated that the crust of Mars is fundamentally basaltic. However, spectral libraries used to interrogate thermal infrared spectra of Martian dark regions through spectral deconvolution have heretofore lacked mafic glasses despite the importance of amorphous phases (or phases with amorphous-like spectral signatures) in Martian mineralogy. To establish the presence and importance of basaltic-to-intermediate glasses in Martian lithologies, we created five such glasses, obtained their thermal infrared spectra and included the spectra in a library used to deconvolve nine regional Thermal Emission Spectrometer spectra from Mars. We employed the nonnegative least squares (NNLS) deconvolution method, which yields deconvolved phase abundances and the uncertainties associated with those abundances. The basaltic-to-intermediate glasses do not appear in the deconvolution solutions, indicating they are not globally or regionally important phases. Because Martian igneous or impact processes are capable of basaltic-to-intermediate glass formation, the lack of such glasses in the deconvolved mineralogies suggests either the glasses did not form in detectable quantities or they (or their signatures) have been removed. The masking or replacement of basaltic-to-intermediate glasses through alteration is supported by the appearance in the deconvolution solutions of amorphous phases (e.g., silica-rich glasses, opal) or phases with amorphous-like spectral signatures (e.g., clays, zeolites) that commonly form through aqueous alteration of mafic glasses. The glasses may still be important to local-scale thermal infrared studies given the basaltic nature of Mars and the variety of local-scale lithologies detected by various missions. The regional mineralogies derived from the NNLS deconvolution analysis divide into five statistically separable groups, which provide insight into regional trends in mineralogy.     

THEMIS observations of Mars aerosol optical depth from 2002-2008

We use infrared images obtained by the Thermal Emission Imaging System (THEMIS) instrument on-board Mars Odyssey to retrieve the optical depth of dust and water ice aerosols over more than 3.5 martian years between February 2002 (MY 25, Ls=330°) and December 2008 (MY 29, Ls=183°). These data provide an important bridge between earlier TES observations and recent observations from Mars Express and Mars Reconnaissance Orbiter. An improvement to our earlier retrieval [Smith, M.D., Bandfield, J.L., Christensen, P.R., Richardson, M.I., 2003. J. Geophys. Res. 108, doi:10.1029/2003JE002114] to include atmospheric temperature information from THEMIS Band 10 observations leads to much improved retrievals during the largest dust storms. The new retrievals show moderate dust storm activity during Mars Years 26 and 27, although details of the strength and timing of dust storms is different from year to year. A planet-encircling dust storm event was observed during Mars Year 28 near Southern Hemisphere Summer solstice. A belt of low-latitude water ice clouds was observed during the aphelion season during each year, Mars Years 26 through 29. The optical depth of water ice clouds is somewhat higher in the THEMIS retrievals at ∼5:00 PM local time than in the TES retrievals at ∼2:00 PM, suggestive of possible local time variation of clouds.     

Sulfates and iron oxides in Ophir Chasma, Mars, based on OMEGA and CRISM observations

We investigate the sulfate and iron oxide deposits in Ophir Chasma, Mars, based on short-wave infrared data from the Compact Reconnaissance Imaging Spectrometer for Mars - CRISM and from the Observatoire pour la Minéralogie, l’Eau, les Glaces et l’Activité - OMEGA. Sulfates are detected mainly in two locations. In the valley between Ophir Mensa and the southern wall of Ophir Chasma, kieserite is found both within the slope of Ophir Mensa, and superposed on the basaltic wall of the chasm. Here, kieserite is unconformably overlain by polyhydrated sulfate deposits and iron oxides. Locally, jarosite and unidentified phases with absorptions at 2.21 μm or 2.23 μm are detected, which could be mixtures of jarosite and amorphous silica or other poorly crystalline phases.The second large sulfate-rich outcrop is found on the floor of the central valley. Although the same minerals are found here, polyhydrated sulfates, kieserite, iron oxides, and locally a possibly jarosite-bearing phase, this deposit is very distinct. It is not layered, almost horizontal, and located at a much lower elevation of below −4250 m. Kieserite superposes polyhydrated sulfate-rich deposits, and iron oxides form lags.The facies of sulfate formation remains unclear, and could be different for the two locations. A formation in a lake, playa or under a glacier is consistent with the mineralogy of the central valley and its flat, low-lying topography. This is not conceivable for the kieserite deposits observed south of Ophir Mensa. These deposits are observed over several thousands of meters of elevation, which would require a standing body of water several thousands of meters deep. This would have lead to much more pervasive sulfate deposits than observed. These deposits are therefore more consistent with evaporation of groundwater infiltrating into previously sulfate-free light-toned deposits. The overlying polyhydrated sulfates and other mineral phases are observed in outcrops on ridges along the slopes of the southern chasm wall, which are too exposed to be reached by groundwater. Here, a water supply from the atmosphere by rain, snow, fog or frost is more conceivable.     

Discovery of jarosite within the Mawrth Vallis region of Mars: Implications for the geologic history of the region

Analysis of visible to near infrared reflectance data from the MRO CRISM hyperspectral imager has revealed the presence of an ovoid-shaped landform, approximately 3 by 5 km in size, within the layered terrains surrounding the Mawrth Vallis outflow channel. This feature has spectral absorption features consistent with the presence of the ferric sulfate mineral jarosite, specifically a K-bearing jarosite (KFe₃(SO₄)₂(OH)₆). Terrestrial jarosite is formed through the oxidation of iron sulfides in acidic environments or from basaltic precursor minerals with the addition of sulfur. Previously identified phyllosilicates in the Mawrth Vallis layered terrains include a basal sequence of layers containing Fe-Mg smectites and an upper set of layers of hydrated silica and aluminous phyllosilicates. In terms of its fine scale morphology revealed by MRO HiRISE imagery, the jarosite-bearing unit has fracture patterns very similar to that observed in Fe-Mg smectite-bearing layers, but unlike that observed in the Al-bearing phyllosilicate unit. The ovoid-shaped landform is situated in an east-west bowl-shaped depression superposed on a north sloping surface. Spectra of the ovoid-shaped jarosite-bearing landform also display an anomalously high 600 nm shoulder, which may be consistent with the presence of goethite and a 1.92 μm absorption which could indicate the presence of ferrihydrite. Goethite, jarosite, and ferrihydrite can be co-precipitated and/or form through transformation of schwertmannite, both processes generally occurring under low pH conditions (pH 2-4). To date, this location appears to be unique in the Mawrth Vallis region and could represent precipitation of jarosite in acidic, sulfur-rich ponded water during the waning stages of drying.     

Slope morphology of hills at the Mars Pathfinder landing site

The study of hillslopes is a primary element of geomorphology and has successfully been used in many terrestrial arenas. In this study we take advantage of High Resolution Imaging Science Experiment (HiRISE) imagery as well as Mars Orbiter Camera (MOC) derived DEMs of the Pathfinder landing site to study regional hillslopes at resolutions many times greater than previously available and compare them with Mars Pathfinder lander images. This site was thought to be modified by massive flooding 1.8-3.5 byr ago and although evidence of flood activity was not obvious at the finer scale of this study, possible lee deposits and terracing were seen in some of the features. Evidence of post flood processes of ice related creep, aeolian and dry mass wasting were observed at the site and have likely obscured flood related morphology present in these features. Regional slopes were found to vary with aspect and suggest processes intensities operating at different orientations, possibly related to the prevailing wind direction, as well as the origin of the ancient flood event.     

Particle transport and distribution on the Mars Science Laboratory mission: Effects of triboelectric charging

We report on the nature of fine particle (<150 μm) transport under simulated martian conditions, in order to better understand the Mars Science Laboratory’s (MSL) sample acquisition, processing and handling subsystem (SA/SPaH). We find that triboelectric charging due to particle movement may have to be controlled in order for successful transport of fines that are created within the drill, processed through the Collection and Handling for In situ Martian Rock Analysis (CHIMRA) sample handing system, and delivered to the Sample Analysis at Mars (SAM) and Chemistry and Mineralogy (CheMin) instruments. These fines will be transferred from the surface material to the portioner, a 3 mm diameter, 8 mm deep distribution center where they will drop ∼2 cm to the instrument inlet funnels. In our experiments, movement of different material including terrestrial analogs and martian soil simulants (Mars Mojave Simulant - MMS) resulted in 1-7 nanocoulombs of charge to build up for several different experimental configurations. When this charging phenomenon occurs, several different results are observed including particle clumping, adherence of material on conductive surfaces, or electrostatic repulsion, which causes like-charged particles to move away from each other. This electrostatic repulsion can sort samples based upon differing size fractions, while adhesion causes particles of different sizes to bind into clods. Identifying these electrostatic effects can help us understand potential bias in the analytical instruments and to define the best operational protocols to collect samples on the surface of Mars.     

Super-resolution of THEMIS thermal infrared data: Compositional relationships of surface units below the 100 meter scale on Mars

The Thermal Emission Imaging System (THEMIS) has provided the highest spatial resolution (100 m/pixel) thermal infrared (TIR) data of the surface of Mars to date. These data have enabled the discovery of many small-scale compositional units and helped to better constrain surface processes operating at these scales. However, with higher-resolution visible (VIS) instruments revealing smaller-scale surficial differences, there exists a need to detect and map compositional variability using TIR data at scales below 100 m. Because it is unlikely there will be a higher-resolution TIR instrument sent to Mars in the near future, creative image processing techniques commonly classified under the umbrella of “super-resolution” can be employed to improve or enhance the spatial resolution of the THEMIS TIR data. These approaches typically integrate another higher-resolution dataset and can either be qualitative for visual appeal, quantitative for data accuracy, or some combination of both. The super-resolution approach presented here produces enhanced TIR images that are radiometrically accurate, but also visually appealing. For the technique to be successfully applied, multi- to hyper-spectral data from two different spectral regions are required (e.g., the THEMIS TIR and VIS datasets). The focus here is to introduce this new super-resolution methodology and demonstrate its ability using existing THEMIS IR and VIS data. The quartzofeldspathic deposit in northern Syrtis Major was selected because of the spectral variability detected using the original IR resolution data and to better constrain the relationship between the small-scale surface morphology and areal extent of the deposit as well as its formation process. Despite being associated with the central peaks of two craters, the results here show no positive correlation between the small rocky outcrops and the quartzofeldspathic unit. A gradational contact exists between the unit and basaltic sands within the intercrater eolian material. The super-resolution approach offers an alternative approach to traditional sub-pixel deconvolution identification and provides a higher-resolution IR dataset for thermophysical and spectral analysis on Mars.     

Dust devil sediment flux on Earth and Mars: Laboratory simulations

Laboratory simulations using the Arizona State University Vortex Generator (ASUVG) were run to simulate sediment flux in dust devils in terrestrial ambient and Mars-analog conditions. The objective of this study was to measure vortex sediment flux in the laboratory to yield estimations of natural dust devils on Earth and Mars, where all parameters may not be measured. These tests used particles ranging from 2 to 2000 μm in diameter and 1300 to 4800 kg m⁻³ in density, and the results were compared with data from natural dust devils on Earth and Mars. Typically, the cores of dust devils (regardless of planetary environment) have a pressure decrease of ∼0.1-1.5% of ambient atmospheric pressure, which enhances the lifting of particles from the surface. Core pressure decreases in our experiments ranged from ∼0.01% to 5.00% of ambient pressure (10 mbar Mars cases and 1000 mbar for Earth cases) corresponding to a few tenths of a millibar for Mars cases and a few millibars for Earth cases. Sediment flux experiments were run at vortex tangential wind velocities of 1-45 m s⁻¹, which typically correspond to ∼30-70% above vortex threshold values for the test particle sizes and densities. Sediment flux was determined by time-averaged measurements of mass loss for a given vortex size. Sediment fluxes of ∼10⁻⁶-10⁰ kg m⁻² s⁻¹ were obtained, similar to estimates and measurements for fluxes in dust devils on Earth and Mars. Sediment flux is closely related to the vortex intensity, which depends on the strength of the pressure decrease in the core (ΔP). This study found vortex size is less important for lifting materials because many different diameters can have the same ΔP. This finding is critical in scaling the laboratory results to natural dust devils that can be several orders of magnitude larger than the laboratory counterparts.