Dynamics of multiple intertidal bars over semi‐diurnal and lunar tidal cycles,North Lincolnshire,England

Multiple intertidal bars are common features of wave‐dominated sandy beaches, yet their short‐term (<1 month) and small‐scale (<1 km) morphology and dynamics remain poorly understood. This study describes the morphodynamics of multiple intertidal bars in North Lincolnshire, England, during single and lunar tidal cycles under two contrasting conditions – first when significant wave height was <0·5 m and second when significant wave height frequently exceeded 1 m. The relative importance of swash, surf and shoaling processes in determining morphological change was examined using detailed field observations and a numerical model. The beach featured four intertidal bars and both cross‐shore and longshore bar morphology evolved during the field investigation, particularly under medium to high wave‐energy conditions. Numerical modelling suggests shoaling processes are most common on the seaward two bars under calm wave conditions (H_s < 0·5 m) and that surf zone processes become more common during neap tides and under more energetic (H_s < 0·5 m) conditions. Surf processes dominate the inner two bars, though swash influence increases in a landward direction. The numerical modelling results combined with low tide survey data and high‐resolution morphological measurements strongly suggest changes in the intertidal bar morphology are accomplished by surf zone processes rather than by shoaling wave or swash processes. This is because shoaling waves do not induce significant sediment transport to have any morphological effect, whereas swash action generally does not have enough scope to act as the swash zone is much narrower than the surf zone. It was found, however, that the absolute rate of morphological change under swash action and surfzone processes are of similar magnitudes and that swash action may induce a significant amount of local morphological change when the high tide mark is located on the upper bar, making this process important for bar morphodynamics. Copyright © 2007 John Wiley & Sons, Ltd.     

The role of beach morphology on coastal cliff erosion under extreme waves

Erosion of hard‐rock coastal cliffs is understood to be caused by a combination of both marine and sub‐aerial processes. Beach morphology, tidal elevation and significant wave heights, especially under extreme storm conditions, can lead to variability in wave energy flux to the cliff‐toe. Wave and water level measurements in the nearshore under energetic conditions are difficult to obtain and in situ observations are rare. Here we use monthly cliff‐face volume changes detected using terrestrial laser scanning alongside beach morphological changes and modelled nearshore hydrodynamics to examine how exposed cliffs respond to changes in extreme wave conditions and beach morphology. The measurements cover the North Atlantic storms of 2013 to 2014 and consider two exposed stretches of coastline (Porthleven and Godrevy, UK) with contrasting beach morphology fronting the cliffs; a flat dissipative sandy beach at Godrevy and a steep reflective gravel beach at Porthleven. Beach slope and the elevation of the beach–cliff junction were found to influence the frequency of cliff inundation and the power of wave–cliff impacts. Numerical modelling (XBeach‐G) showed that under highly energetic wave conditions, i.e. those that occurred in the North Atlantic during winter 2013–2014, with H_s = 5.5 m (dissipative site) and 8 m (reflective site), the combination of greater wave height and steeper beach at the reflective site led to amplified wave run‐up, subjecting these cliffs to waves over four times as powerful as those impacting the cliffs at the dissipative site (39 kWm^‐1 compared with 9 kWm^‐1). This study highlighted the sensitivity of cliff erosion to extreme wave conditions, where the majority (over 90% of the annual value) of cliff‐face erosion ensued during the winter. The significance of these short‐term erosion rates in the context of long‐term retreat illustrates the importance of incorporating short‐term beach and wave dynamics into geomorphological studies of coastal cliff change. © 2017 The Authors. Earth Surface Processes and Landforms published by John Wiley & Sons Ltd.     

Alongshore variability of cross‐shore bar behavior on a nontidal beach

We report on a 6‐year nearshore bathymetric dataset from the Danube Delta (Romanian Black Sea coast) that comprises 16 km of erosive, stable and accumulative low‐lying micro‐tidal beaches northward of Sf. Gheorghe arm mouth. Two to three two‐dimensional longshore sandbars exhibit a net multi‐annual cyclic (2.8–5.5 years) offshore migration (20–50 m yr^?1) in a similar way to other coasts worldwide. Bar morphology and behavior on the sediment‐rich accretionary (dissipative) sector differ substantially from that on the erosive (intermediate) sector. Shoreface slope is the most important factor controlling sandbar number and behavior. It determines different wave‐breaking patterns in the surf zone, translated into different offshore sediment transport and bar zone widths along the study site. Additionally, sediment availability, as a result of the distance from the arm mouth and of the long‐term evolution of the coast, controls the sandbar volume variability. These are all ultimately reflected in the variations of sandbar migration rates and cycle periods. A non‐dimensional morpho‐sedimentary parameter is finally presented, which expresses the bar system change potential as offshore sediment transport potential across the bar zone. Copyright © 2016 John Wiley & Sons, Ltd.     

Links between wave forcing,offshore islands and a macro‐tidal headland‐bound bay beach

Profiles were analysed in conjunction with wave climate to assess offshore island influences on an embayed beach at Tenby, Wales. Time series analyses showed medium and short‐term beach oscillation, with volume exchanges between zones lagging by up to six months. Dominant southerly and southwesterly waves caused sub and low tidal longshore drift from south towards north, while less frequent southeasterly waves generated counter drift. Modelled inshore breaking waves had less energy than offshore ones and the former behaved differently between the low and high tidal zones (spring tidal range of 7 · 5 m). Variations in wave direction from directly behind the islands resulted in reduced wave heights and statistical analyses agreed with wave model results. These were correlated to morphological change and it was concluded that offshore islands change wave dynamics and modify the morphology of embayed beaches in their lee. Consequently, this work provides significant new insights into offshore island influences, shoreline behaviour and especially tidal setting Copyright © 2013 John Wiley & Sons, Ltd.     

Nearshore circulation over transverse bar and rip morphology with oblique wave forcing

There is a paucity of field data to describe the transition in nearshore circulation between alongshore, meandering and rip current systems. A combination of in‐situ current meters and surf zone drifters are used to characterize the nearshore circulation over a transverse bar and rip morphology at Pensacola Beach, Florida in the presence of relatively low energy oblique waves. Current speeds vary in response to the relative wave height ratio (H_s/h), which defines the degree and extent of breaking over the shoal. In the absence of wave breaking the nearshore circulation was dominated by an alongshore current driven by the oblique waves. As waves begin to break across the shoal (0.2<H_s/ h<0.5) the nearshore circulation is characterized by a meandering alongshore current. As conditions became more dissipative (H_s/h>0.5), the meandering current is replaced by an unsteady rip circulation that moves offshore between the shoals before turning alongshore in the direction of wave advance outside the surf zone. The increase in wave dissipation is associated with an increase in very low frequency (VLF) variations in the current speed across the shoal and in the rip channel that caused the circulation to oscillate between an offshore and an alongshore flow. The unsteady nature of the nearshore circulation is responsible for 55% of all surf zone exits under these more dissipative conditions. In contrast, only 29% of the drifters released from the shoal exited the surf zone and bypassed the adjacent shoal with the alongshore‐meandering current. While the currents had a low velocity (maximum of ~0.4 m s^‐1) and would not pose a significant hazard to the average swimmer, the results of this study suggest that the transverse bar and rip morphology is sufficient to create an alongshore variation in wave dissipation that forces alongshore meandering and low‐energy rip circulation systems under oblique wave forcing. Copyright © 2013 John Wiley & Sons, Ltd.     

Field observations of nearshore bar formation

The formation of an inner nearshore bar was observed during a high‐energy event at the sandy beach of Vejers, Denmark. The bar accreted in situ during surf zone conditions and the growth of the bar was associated with the development of a trough landward of the bar. Measurements of hydrodynamics and sediment fluxes were obtained from electromagnetic current meters and optical backscatter sensors. These process measurements showed that a divergence in sediment transport occurred at the location of the developing trough, and observed gradients in cross‐shore net sediment flux were consistent with the morphological development. The main cause for the flux gradients were cross‐shore gradients in offshore‐directed mean current (undertow) speed which depended upon local relative wave height and local bed slope. Copyright © 2007 John Wiley & Sons, Ltd.     

Short‐term intertidal bar mobility on a ridge‐and‐runnel beach,Merlimont, northern France

Digital elevation models and topographic pro?les of a beach with intertidal bar and trough (ridge‐and‐runnel) morphology in Merlimont, northern France, were analysed in order to assess patterns of cross‐shore and longshore intertidal bar mobility. The beach exhibited a pronounced dual bar–trough system that showed cross‐shore stationarity. The bars and troughs were, however, characterized by signi?cant longshore advection of sand under the in?uence of suspension by waves and transport by strong tide‐ and wind‐driven longshore currents. Pro?le changes were due in part to the longshore migration of medium‐sized bedforms. The potential for cross‐shore bar migration appears to be mitigated by the large size of the two bars relative to incident wave energy, which is modulated by high vertical tidal excursion rates on this beach due to the large tidal range (mean spring tidal range = 8·3 m). Cross‐shore bar migration is also probably hindered by the well‐entrenched troughs which are maintained by channelled high‐energy intertidal ?ows generated by swash bores and by tidal discharge and drainage. The longshore migration of intertidal bars affecting Merlimont beach is embedded in a regional coastal sand transport pathway involving tidal and wind‐forced northward residual ?ows affecting the rectilinear northern French coast in the eastern English Channel. Copyright © 2004 John Wiley & Sons, Ltd.     

Divergent response of an intertidal swash bar

This paper examines the processes responsible for the morphodynamics of an intertidal swash bar at Skallingen, Denmark, during seven successive storms (one with a large surge of +3·02 m DNN). During this period a subtidal bar migrated landward onto the foreshore and continued to migrate across the intertidal zone as a swash bar. The onshore migration of the inner subtidal bar resulted from the erosion of sediment from the upper foreshore and dune ramp during the large storm surge that was transported seaward, causing the landward displacement of the bar through accretion on the landward slope. The magnitude and direction of suspended sediment transport within the intertidal zone, and more specifically at and close to the crest of the swash bar, varied with the ratio of both the significant (H_s) and average (H_avg) wave heights to the water depth (h_cr) at the swash bar crest (the local depth minimum). The transition between onshore and offshore suspended sediment transport was associated with the average wave of the incident distribution breaking on the swash bar crest (H_avgh ≈ 0·33). While the onshore‐directed transport was largest at infragravity frequencies, sediment resuspension was best explained by the skewed accelerations under the surf bores. Offshore transport was dominated by the cross‐shore mean currents (undertow) that developed when the significant wave of the distribution broke on the swash bar crest (H_sh ≈ 0·33) and weakened as the average wave of the distribution started to break at the crest (H_avgh ≈ 0·33) and the surf zone approached saturation. In contrast to subtidal bars, the swash bar at Skallingen exhibited a divergent behaviour with respect to the cross‐shore position of the breaker zone, migrating onshore when the average wave broke seaward of the crest and migrating offshore when the average wave broke landward of the crest. Copyright © 2006 John Wiley & Sons, Ltd.     

Dynamics of intertidal drainage channels on a multi‐barred macrotidal beach

The intertidal drainage channels on a macrotidal bar–trough (ridge‐and‐runnel) beach were monitored during a 17‐day survey. Type 1 channels were persistent, dominantly longshore systems essentially limited to the wide intertidal zone between mean high and low water neap tidal levels. The cumulative length of this channel type fluctuated as a function of topographically controlled through‐flow or flow impedance in troughs, and showed no correlation with the semi‐lunar tidal cycle. Smaller, ephemeral type 2 channels appeared as dominantly cross‐shore systems incising bars on the narrower upper and lower beach zones during spring tides. They disappeared during neap tides through infill by waves and aeolian activity. The only significant phase of type 1 channel mobility occurred during a brief moderate‐energy storm at the start of the survey. The effect of this mobility on beach morphology was inextricably linked to that of waves and currents. Meander bend migration, forced by wave‐ and longshore‐current‐induced migration of a bar during the storm, resulted in important but highly localized morphological change that was only a minor part of an irregular saw‐tooth pattern of change that affected the entire beach profile, and that was largely controlled by wave processes and longshore currents. The flow velocities in channels on this beach are too weak to generate the formation and longshore migration of high‐energy bedforms. Channel mobility and impact on beach morphology are expected to increase under storm conditions. Copyright © 2007 John Wiley & Sons, Ltd.     

Daily to seasonal cross‐shore behaviour of quasi‐persistent intertidal beach morphology

In this study, an intertidal bar and trough system on the beach of Noordwijk, The Netherlands was monitored over a 15‐month period in order to examine the daily to seasonal sequential cross‐shore behaviour and to establish which conditions force or interrupt this cyclic bar behaviour. The beach morphology (bars and troughs) was classified from low‐tide Argus video images based on surface composition. From the classified images, time series of the landward boundary of the bar and of the trough were extracted. The time series of the alongshore‐averaged boundary positions described sawtooth motion with a period between 1 and 4 months, comprising gradual landward migration followed by abrupt seaward shifts. The abrupt seaward shift appeared to be a morphological reset induced by storm events, which lasted at least 30 h with a large average root‐mean‐square wave height (≥2 m) and offshore surge level (≥0·5 m), and a small trough (<20 m wide) in the pre‐storm beach morphology. The time series of the boundary positions exhibited very little longer (seasonal) scale variability, but somewhat larger smaller (daily) scale variability. The bar boundary was found to be more dynamic than the trough boundary. Copyright © 2007 John Wiley & Sons, Ltd.     

A cross-shore suspended sediment transport shape function parameterisation for natural beaches

A new field-based parameterisation (‘shape function’) describing the distribution of cross-shore suspended sediment transport across a beach profile is presented. Time-averaged and depth-integrated suspended sediment fluxes were measured over 39 tides at Sennen Cove, Cornwall, UK, for a range of wave conditions (offshore significant wave heights 0.1–2.5 m). The suspended sediment flux data were heuristically separated into four transport components: (1) mean flux in the surf/shoaling zone; (2) oscillatory flux in the surf/shoaling zone; (3) onshore flux in the swash/inner surf zone and (4) offshore flux in the swash/inner surf zone. Each of these transport components was related to the local water depth (h) normalised by the breakpoint depth (h_b) and the four resulting suspended transport shape functions were combined to form a total suspended load shape function. Each shape function component is scaled independently by the wave energy level through h_b. The total suspended load shape function predicts onshore sediment transport under low-energy conditions, with peaks at the breakpoint and in the swash zone, in agreement with the field observations. Under high-energy conditions the total suspended load shape function predicts onshore transport in the shoaling zone, offshore transport in the surf zone and onshore transport in the inner swash zone.     

Analysis of the effects of different storm events on shoreline dynamics of an artificially embayed beach

A five‐year dataset of Argus‐derived mean intertidal positions has been analysed to characterize the shoreface variability in a beach protected by a system of groynes and a parallel low crested structure (Lido di Dante Ravenna, Italy). For the period 2004–2009, 84 intertidal beach bathymetries and shorelines at the zero sea level were used as indicators to assess beach changes in between a number of selected surveys and to determine characteristic patterns of the beach response to storm events from different directions. Variations in the shoreline at the zero sea levels have been quantified and analysed in conjunction with nearshore wave conditions and provenance linked to storm events. These fall into two categories: (1) storm events occurring during Bora (north‐eastern) wind conditions and (2) storm events occurring during Scirocco (south‐eastern) wind conditions. The results show that, apart from main beach advances of the whole protected beach due to nourishments periodically carried out, a marked variability is observed among the four sub‐cells into which the shoreface behaviour has been separately analysed. In particular, a dependence of beach rotation in the ‘artificially embayed’ area on the substantially bi‐directional wave climate has been shown: Bora and Scirocco storm events produce shoreline rotation in counterclockwise and clockwise directions, respectively, due to the occurrence of longshore currents in the opposite direction in the nearshore. An attempt was made to correlate the shoreface dynamics for the main rotation events (14 selected ones) to the wave attack intensity (as the total energy flux due to storm events). A relationship seems to occur (for each storm category) between the shoreline displacements estimated for each sub‐cell and the total energy flux computed for inter‐survey periods, supporting the occurrence of a link between the observed morphological changes and the hydrodynamic forcing associated with storm events in the five‐year monitoring period. Copyright © 2011 John Wiley & Sons, Ltd.     

Sediment accumulation in embayments controlled by bathymetric slope and wave energy: Implications for beach formation and persistence

High energy, rocky coastlines often feature sandy beaches within headland‐bound embayments. Not all such embayments have beaches however, and beaches in embayments can be removed by storms and may subsequently reform. What dictates the presence or absence of an embayed beach and its resilience to storms? In this paper, we explore the effect of offshore slope and wind conditions on nearshore sediment transport within idealised embayments to give insight into nearshore sediment supplies. We use numerical simulations to show that sand can accumulate near shore if the offshore slope is >0.025 m/m, but only under persistent calm conditions. Our modelling also suggests that if sediment in an embayment with an offshore gradient steeper than 0.025 m/m is removed during a period of persistent stormy conditions, it will be unlikely to return in sub‐decadal timescales. In contrast, sediment located in embayments with shallower gradients can reform swiftly in both calm and stormy conditions. Our findings have wide implications for contemporary coastal engineering in the face of future global climate change, but also for Quaternary environmental reconstruction. Our simple method to predict beach stability based on slope can be used to interpret differing responses of embayments to periods of changing coastal storminess such as the medieval climate anomaly‐little ice age (MCA‐LIA) transition. © 2018 The Authors. Earth Surface Processes and Landforms published by John Wiley & Sons Ltd.     

Wave-forced dynamics in the nearshore river mouths,and swash zones

The role of wave forcing on the main hydro-morphological dynamics evolving in the shallow waters of the nearshore and at river mouths is analyzed. Focus is mainly on the cross-shore dynamics that evolve over mildly sloping barred, dissipative sandy beaches from the storm up to the yearly timescale, at most. Local and non-local mechanisms as well as connections across three main inter-related subsystems of the nearshore – the region of generation and evolution of nearshore bars, river mouths and the swash zone – are analyzed. The beach slope is a major controlling parameter for all nearshore dynamics. A local mechanism that must be properly described for a suitable representation of wave-forced dynamics of all such three subsystems is the proper correlation between orbital velocity and sediment concentration in the bottom boundary layer; while specific dynamics are the wave–current interaction and bar generation at river mouths and the sediment presuspension at the swash zone. Fundamental non-local mechanisms are both infragravity (IG) waves and large-scale horizontal vortices (i.e. with vertical axes), both influencing the hydrodynamics, the sediment transport and the seabed morphology across the whole nearshore. Major connections across the three subsystems are the upriver propagation of IG waves generated by breaking sea waves and swash–swash interactions, the interplay between the swash zone and along-river-flank sediment transport and the evolution of nearshore sandbars. © 2019 John Wiley & Sons, Ltd.     

The extreme 2013/2014 winter storms: hydrodynamic forcing and coastal response along the southwest coast of England

The southwest coast of England was subjected to an unusually energetic sequence of Atlantic storms during the 2013/2014 winter, with the 8‐week period from mid‐December to mid‐February representing the most energetic period since at least 1953. A regional analysis of the hydrodynamic forcing and morphological response of these storms along the SW coast of England highlighted the importance of both storm‐ and site‐specific conditions. The key factor that controls the Atlantic storm wave conditions along the south coast of southwest England is the storm track. Energetic inshore wave conditions along this coast require a relatively southward storm track which enables offshore waves to propagate up the English Channel relatively unimpeded. The timing of the storm in relation to the tidal stage is also important, and coastal impacts along the macro‐tidal southwest coast of England are maximised when the peak storm waves coincide with spring high tide. The role of storm surge is limited and rarely exceeds 1 m. The geomorphic storm response along the southwest coast of England displayed considerable spatial variability; this is mainly attributed to the embayed nature of the coastline and the associated variability in coastal orientation. On west‐facing beaches typical of the north coast, the westerly Atlantic storm waves approached the coastline shore‐parallel, and the prevailing storm response was offshore sediment transport. Many of these north coast beaches experienced extensive beach and dune erosion, and some of the beaches were completely stripped of sediment, exposing a rocky shore platform. On the south coast, the westerly Atlantic storm waves refract and diffract to become southerly inshore storm waves and for the southeast‐facing beaches this results in large incident wave angles and strong eastward littoral drift. Many south coast beaches exhibited rotation, with the western part of the beaches eroding and the eastern part accreting. © 2015 The Authors. Earth Surface Processes and Landforms published by John Wiley & Sons Ltd.     

Process‐based modeling of kilometer‐scale alongshore sandbar variability

Subtidal nearshore sandbars may exhibit cyclic net offshore migration during their multi‐annual lifetime along many sandy coasts. Although this type of behavior can extend continuously for several kilometers, alongshore variations in cross‐shore bar position and bar amplitude are commonly observed. Alongshore variability is greatest when bars display km‐scale disruptions, indicative of a distinct alongshore phase shift in the bar cycle. An outer bar is then attached to an inner bar, forming a phenomenon known as a bar switch. Here, we investigate such large‐scale alongshore variability using a process‐based numerical profile model and observations at 24 transects along a 6 km section of the barred beach at Noordwijk, The Netherlands. When alongshore variability is limited, the model predicts that the bars migrate offshore at approximately the same rate (i.e. the bars remain in phase). Only under specific bar configurations with high wave‐energy levels is an increase in the alongshore variability predicted. This suggests that cross‐shore processes may trigger a switch in the case of specific antecedent morphological configurations combined with storm conditions. It is expected that three‐dimensional (3D) flow patterns augment the alongshore variability in such instances. In contrast to the observed bar behaviour, predicted bar morphologies on either side of a switch remain in different phases, even though the bars are occasionally located at a similar cross‐shore position. In short, the 1D model is not able to remove a bar switch. This data‐model mismatch suggests that 3D flow patterns are key to the dissipation of bar switches. Copyright © 2014 John Wiley & Sons, Ltd.     

Berm formation and dynamics on a gently sloping beach; the effect of water level and swash overtopping

Berm formation and morphological development of the beach face have been observed during a neap–neap tidal cycle on the gently sloping and accreting beach at Vejers, Denmark. During the field campaign, an intertidal bar migrated onshore and stabilized as a berm on the foreshore. A new intertidal bar occurred on the lower beach face, migrated onshore on the rising tide and finally merged with the pre‐existing berm. As the tide continued to rise, the new berm translated further onshore as an intertidal bar to the uppermost part of the foreshore. The sediment transport during the berm transition was onshore directed in the upper swash and offshore directed in the lower swash. This berm development can be described through both the neap‐berm, ridge‐and‐runnel and berm‐ridge development concepts proposed by Hine (Sedimentology 1979; 26: 333–351), and all three stages were observed during only three tidal cycles. The main factors controlling this fast transformation were the gentle slope of the cross‐shore profile, rapid water level translation rates, substantial swash overtopping of the berm, and low infiltration rates. Despite the onshore migration of intertidal bars and berm formation, no net foreshore accretion took place during the field campaign. This was largely due to the formation of rip channels with strong rip currents cutting through the intertidal bars and the berm, which acted as a sediment drain in the profile. Copyright © 2009 John Wiley & Sons, Ltd.     

A numerical model for shore-normal sediment size variation on a macrotidal beach

This paper describes a computer simulation model which is designed to predict the selective shore-normal sorting of grain sizes in the nearshore environment. The model simulates wave shoaling, wave height attenuation due to frictional losses and breaking, using linear theory up to the break point and a breaker decay model in the surf zone. Peak horizontal orbital velocities at the bed are calculated from Stokes second-order wave theory. The peak onshore and offshore velocities are used with the threshold expression of Komar and Miller (1975) to generate a spatial pattern of size variation of threshold grain diameter along a profile normal to the shore from deep water to the swash zone. The predicted grain size is used in an hydraulic interpretation of grain size distribution on the intertidal profile, based on the hydrodynamic variations over a tidal cycle on a macrotidal beach. The model is successful in predicting the broad pattern of increasing grain size in the onshore direction which has been observed in nature. Comparisons between measured and predicted grain size distributions indicate that the predictions of the model are better than those of previous models, but the model is more successful at predicting sediment size distributions than at predicting mean sizes on a beach profile.     

Field measurements of intertidal bar evolution on a high‐energy beach system

Nearshore bars play a pivotal role in coastal behaviour, helping to protect and restore beach systems particularly in post‐storm conditions. Examination of bar behaviour under various forcing conditions is important to help understand the short‐ to medium‐term evolution of sandy beach systems. This study carried out over a nine‐week period examines, the behaviour of three intertidal bars along a high energy sandy beach system in northwest Ireland using high‐frequency topographic surveys and detailed nearshore hydrodynamic modelling. Results show that, in general, there was onshore migration for all the bars during the study period, despite the variability observed between bars, which was driven mostly by wave dominated processes. Under the prevailing conditions migration rates of up to 1.83 m day^?1 and as low as 0.07 m day^?1 were observed. During higher wave energy events the migration rates of the bars decelerated in their onshore route, however, under lower wave energy conditions, they quickly accelerated maintaining their shoreward migration direction. Tidal influence appears to be subordinate in these conditions, being restricted to moderating the localized wave energy at low tides and in maintaining runnel configurations providing accommodation space for advancing slip faces. The study highlights the intricate behavioural patterns of intertidal bar behaviour along a high energy sandy coastline and provides new insights into the relative importance of wave and tidal forcing on bar behaviour over a relatively short time period. Copyright © 2016 John Wiley & Sons, Ltd.     

Temporal observations of rip current circulation on a macro-tidal beach

A field experiment was conducted on a high energy macro-tidal beach (Perranporth, UK) to examine rip current dynamics over a low-tide transverse bar/rip system in response to changing tide and wave conditions. Hydrodynamic data were collected using an array of in situ acoustic doppler current meters and pressure transducers, as well as 12 GPS-tracked Lagrangian surf zone drifters. Inter-tidal and sub-tidal morphology were measured through RTK-GPS and echo-sounder surveys. Data were collected for eight consecutive days (15 tides) over a spring-neap tidal cycle with tidal ranges of 4–6.5 m and offshore significant wave heights of 1–2 m and peak periods of 5–12 s.