Cloud Point Extraction for the Preconcentration of Silver and Palladium in Real Samples and Determination by Atomic Absorption Spectrometry

A cloud point extraction procedure is presented for the preconcentration and simultaneous determination of Ag⁺ and Pd²⁺ in various samples. After complexation with 2‐((2‐((1H‐benzo[d]imidazole‐2‐yl)methoxy)phenoxy)methyl)‐1H‐benzo[d]imidazol (BIMPI), which was used as a new chelating agent, analyte ions were quantitatively extracted to a phase rich in Triton X‐114 following centrifugation, and determination was carried out by flame atomic absorption spectrometry (FAAS). Under the optimum experimental conditions (i. e., pH = 7.0, 15.0·10^–5 mol/L BIMPI and 0.036% (w/v) Triton X‐114), calibration graphs were linear in the range of 28.0–430.0 μg/L and 57.0–720.0 μg/L with detection limits of 10.0 and 25.0 μg/L for Ag⁺ and Pd²⁺, respectively. The enrichment factors were 35.0 and 28.0 for Ag⁺ and Pd²⁺, respectively. The method has been successfully applied to evaluate these metals in some real samples, including waste water, soil and hydrogenation catalyst samples.     

On‐line Solid Phase Extraction of Copper in Water Samples with Flow Injection Flame Atomic Absorption Spectrometry

An on‐line solid phase extraction method for the preconcentration and determination of Cu(II) by flame atomic absorption spectrometry has been described. The procedure is based on the retention of Cu(II) ions at pH 6.0 on a minicolumn packed with Amberlite XAD‐1180 resin impregnated with chrome azurol S. After preconcentration, Cu(II) ions adsorbed on the impregnated resin were eluted by 1 mol L^?1 HNO₃ solution. Several parameters, such as pH, type of eluent, flow rates of sample and eluent solutions, amount of resin were evaluated. At optimized conditions, for 3.5 min of preconcentration time, the system achieved a detection limit of 1.0 µg L^?1, and a relative standard deviation of 1.2% at 0.2 µg mL^?1 copper. An enrichment factor of 56‐fold was obtained with respect to the copper determination. The proposed method was successfully validated by the analysis of standard reference material (TMDA 54.4 lake water) and recovery studies. The method was applied to the preconcentration of Cu(II) in natural water samples.     

Dispersive Liquid–Liquid Microextraction for Preconcentration and Determination of Nickel in Water

A method for the determination of nickel in water was developed. The procedure involves preconcentration of nickel by using dispersive liquid–liquid microextraction. The Ni(II) ions were extracted in chloroform in the form of complex with the reagent 2‐(2′‐benzothiazolylazo)‐p‐cresol. Ethanol was used as the disperser solvent. After injection of the extracting mixture in a solution of nickel, a cloudy mixture was observed. A quick centrifugation induces phase separation and thus the settling of rich phase. The nickel content in the rich phase is measured by flame atomic absorption spectrometry. Under optimal conditions, the limit of detection and quantification obtained were 1.4 and 4.7 µg L^?1, respectively. Some parameters used to characterize preconcentration systems, such as enrichment factor and consumption index were calculated and resulted in 29 and 0.34 mL, respectively. After optimization of variables and determination of analytical characteristics, the method was used for the analysis of certified reference materials (BCR‐713: wastewater, effluent and BCR‐414: plankton) and real water samples.     

Development of Dispersive Liquid–Liquid Microextraction Based on Solidification of Floating Organic Drop for the Determination of Trace Lead in Water

A new method for determining lead (Pb) content was developed by dispersive liquid–liquid microextraction based on the solidification of floating organic droplets followed by flame atomic absorption spectrometry. Under optimum conditions, the calibration graph was linear within the Pb content range of 8.43–400 µg L^?1 with a detection limit of 2.53 µg L^?1. The relative standard deviation for 10 replicate measurements of 20 and 400 µg L^?1 of Pb were 3.41 and 2.78%, respectively. The proposed method was assessed through the analysis of certified reference water and recovery experiments.     

Preconcentration by Coprecipitation of Copper and Nickel with Mo(VI)/Triazole Derivative System and Their Determinations by Flame Atomic Absorption Spectrometry in Food and Water Samples

A new separation and preconcentration technique based on coprecipitation of Cu(II) and Ni(II) ions by the aid of Mo(VI)/di‐tert‐butyl{methylenebis[5‐(chlorobenzyl)‐4H‐1,2,4‐triazol‐3,4‐diyl]}biscarbamate (BUMECTAC) precipitate has been established. The Mo(VI)/BUMECTAC precipitate was dissolved by concentrated HNO₃ and the solution was completed to 5.0 mL with distilled/deionized water. The levels of the analyte ions were determined by flame atomic absorption spectrometer. The effects of experimental conditions like HNO₃ concentration, amount of BUMECTAC and Mo(VI), sample volume, etc. and also the influences of some foreign ions were investigated in detail on the quantitative recoveries of analyte ions. The preconcentration factors were found to be 40 for Cu(II) and 100 for Ni(II) ions. The detection limits for Cu(II) and Ni(II) ions based on 3σ (N:10) were 0.43 and 0.70 µg L^?1, respectively. The relative standard deviations were found to be lower than 4.0% for both analyte ions. The accuracy of the method was checked by spiked/recovery tests and the analysis of two certified reference materials (Environment Canada TM‐25.3 and CRM‐SA‐C Sandy Soil C). The procedure was successfully applied to sea water and stream water as liquid samples and baby food as solid sample in order to determine the levels of Cu(II) and Ni(II) ions.     

Ultrasound‐Assisted Emulsification–Microextraction Combined with Graphite Furnace Atomic Absorption Spectrometry for the Determination of Trace Lead in Water

The ultrasound‐assisted emulsification–microextraction (USAEME) method was combined with graphite furnace atomic absorption spectrometry (GFAAS) for the determination of trace Pb using dithizone (H²DZ) as chelating reagent. Some effective parameters influenced the detection and microextraction, such as ashing temperature and atomization temperature, pH, extraction solvent, sample volume, extraction time, and extraction temperature were selected and optimized. After extraction, the calibration curves for Pb was in the concentration range of 0.1–10 ng mL^?1, and the linear equation was y = 0.097 x + 0.023 (R = 0.99). Under the optimized conditions, the detection limit of the method was 20 pg mL^?1 with an enrichment factor of 70 and the relative standards deviation (RSD) for seven determinations of 1 ng mL^?1 Pb was 11%. The proposed method was successfully applied to determine trace Pb in Yueya Lake water, pond water, and spiked samples. Furthermore, a certified reference material of Environment Water (GBW08607) was analyzed and the determined value was in good agreement with the certified value, which showed the accuracy, recovery, and applicability of the reported method.     

Development of an Analytical Method for the Determination of Trace Lead in Lake Water Samples by Flame Atomic Absorption Spectrophotometry after Vortex Assisted-Stearic Acid Coated Magnetic Nanoparticle Based Extraction

In the present study, a method is proposed for the determination of lead at trace levels by slotted quartz tube-flame atomic absorption spectrophotometry (SQT-FAAS) after preconcentration with stearic acid coated magnetic nanoparticle-based dispersive solid phase extraction (SA-MNP-DSPE). The slotted quartz tube (SQT) is used to enhance the analyte atom residence time in the light path. Stearic acid coated magnetic iron oxide (Fe₃O₄) nanoparticles, which can be easily collected with an external magnet, are used as adsorbent in the extraction process. The limit of detection (LOD) and the limit of quantitation (LOQ) values of the proposed method are obtained as 0.90 and 2.9 µg L⁻¹, respectively. The method allows high repeatability in a wide linear range between 5.0 and 250 µg L⁻¹, and the relative standard deviation for six replicates is 5.8%. The detection power is enhanced by about 77-fold compared to the regular flame atomic absorption spectrophotometry (FAAS) system. The method is validated by recovery experiments to four different lake water samples. After the spiking tests, good recovery results are calculated between 97% and 106%. These results show that lead can be detected at low levels in lake water samples with high sensitivity, accuracy, and precision.     

Online Preconcentration and Determination of Trace Levels Cadmium in Water Samples Using Flow Injection Systems Coupled with Flame AAS

A rapid and sensitive method for the determination of trace levels cadmium in water samples by flame atomic absorption spectrometry was developed. It is based on the online sorption of Cd(II) ions on a microcolumn packed with HCl treated bamboo charcoal. In a pH range of 5.0–7.5, Cd(II) ions were effectively retained on the microcolumn, which exhibited fast kinetics, permitting the use of high sample flow rates up to at least 12.8 mL/min without the loss of retention efficiency. The retained Cd(II) ions were quantitatively eluted with HCl (2.0 mol/L) for an online determination. With a preconcentration time of 80 s at a sample loading flow rate of 8.6 mL/min, a sensitivity enhancement factor of 63 was obtained compared with the slope of the linear portion of the calibration curves before and after preconcentration. The calibration graph using the preconcentration system for cadmium was linear with a correlation coefficient of 0.9997, at levels from 1–40 ng/mL. The precision (RSD) for 11 replicate measurements were 3.2% for the determination of 5 ng/mL Cd(II) and 1.8% for 20 ng/mL Cd(II), respectively, and the detection limit (3s) was 0.36 ng/mL. The accuracy was assessed through the determination of a certified reference material, and also through recovery experiments.     

Flame Atomic Absorption Spectrometry Determination of Trace Amounts of Cadmium and Zinc in Water Samples after Preconcentration onto Modified Amberlite XAD‐4 Resin

In the present article, a procedure for the simultaneous separation and preconcentration of trace amounts of cadmium and zinc is proposed. It is based on the adsorption of cadmium and zinc ions onto a column of Amberlite XAD‐4 resin loaded with aluminon reagent. Cadmium and zinc ions are quantitatively retained on the column in the pH range from 6.5–7.5, at a flow rate of 2 mL min^–1. The cadmium and zinc ions are eluted with 5.0 mL of 5 mol L^–1 HNO₃ solution. Cadmium and zinc are measured by flame atomic absorption spectrometry (FAAS). In the present case, 0.1 μg of cadmium and 0.5 μg of zinc can be concentrated in the column from 1000 mL of aqueous sample, where their concentrations are as low as 0.1 and 0.5 ng mL^–1, respectively. The relative standard deviations, for seven replicated determinations of 1.0 μg mL^–1 of cadmium and zinc, are 1.2 and 1.1%, respectively. The detection limits for cadmium and zinc in the original solution are 0.02 and 0.11 ng mL^–1, respectively. The interference of a large number of anions and cations has been studied and the optimized conditions are utilized for the determination of trace amounts of cadmium and zinc in different environmental and standard samples.     

Selective Separation/Preconcentration of Silver Ion in Water by Multiwalled Carbon Nanotubes Microcolumn as a Sorbent

The present paper proposes the application of multiwalled carbon nanotubes (MWCNTs) as a solid adsorbent for selective separation/preconcentration of silver(I) in water samples prior to flame atomic absorption spectrometry. The procedure is based on the solid phase extraction of Ag(I)–2‐mercaptobenzothiazole chelate on MWCNTs. The elution step is carried out with 5 mL of 2 mol L^?1 HNO₃ in acetone solution at a flow rate of 1.0 mL min^?1. The influences of the various analytical parameters including pH of the solution, eluent type, sample volume, flow rates of eluent, matrix ions were investigated for optimization of the presented procedure. Tests of addition/recovery for analyte ion in real samples were performed with satisfactory results. Preconcentration factor and limit of detection for Ag(I) were 160 and 0.21 µg L^?1, respectively. The synthesized MWCNT exhibited excellent stability in eluent solution and its adsorption capacity was 5.4 mg of silver per gram of sorbent. The proposed method was successfully applied to trace silver determination in a variety of environmental water samples.     

Occurrence and Distribution of Organic Contaminants in the Aquatic System in Berlin. Part III: Determination of Synthetic Musks in Berlin Surface Water Applying Solid-phase Microextraction (SPME) and Gas Chromatography-Mass Spectrometry (GC-MS)

Polycyclic musks and nitro musks were found as environmental pollutants in screening analyses of 30 representative surface water samples collected from rivers, lakes, and canals in Berlin. These synthetic musks, which are used as fragrances in cosmetics, detergents, and other products, are discharged by the municipal sewage treatment plants into Berlinπs surface waters. In particular, the polycyclic musks 1,3,4,6,7,8-hexahydro-4,6,6,7,8,8-hexamethylcyclopenta-(g)-2-benzopyrane (HHCB; Galaxolide®, Abbalide®) and 7-acetyl-1,1,3,4,4,6-hexamethyltetraline (AHTN; Tonalide®, Fixolide®) were found in the receiving surface waters at considerable concentrations up to the μg/L-level. In the Wuhle, a small brook almost totally consisting of sewage effluents, maximum concentrations were 12.5 μg/L for HHCB and 6.8 μg/L for AHTN. Additionally, the polycyclic musk 4-acetyl-1,1-dimethyl-6-tert-butylindane (ADBI; Celestolide®, Crysolide®) and 1-tert-butyl-3,5-dimethyl-2,6-dinitro-4-acetylbenzene (musk ketone) were detected at low concentrations in most of the samples. Two other nitro musks, namely 1,1,3,3,5-pentamethyl-4,6-dinitroindene (musk moskene) and 1-tert-butyl-3,5-dimethyl-2,4,6-trinitrobenzene (musk xylene), were only detected in a single surface water sample. Solid-phase microextraction (SPME) with detection by gas chromatography-mass spectrometry (GC-MS) has proven to be a rapid and reliable tool for the screening of synthetic musks in surface and sewage water samples. Internal calibration with a suitable internal standard enables reproducible quantitation of the analytes down to the low ng/L-level.     

Determination of Cu,Fe, and Ni in Spices after Preconcentration on Diaion‐HP 20 Resin as Their Zincon Complexes

In this work, a new separation–preconcentration method was developed for the determination of trace amounts of Cu(II), Ni(II), and Fe(III) by flame atomic absorption spectrometry (FAAS). Analytes were complexed by using zincon (2‐[2‐[alpha(2‐hydroxy‐5‐sulfophenylazo) benzylidene] hydrazino] benzoic acid sodium salt). The analyte ions were quantitatively adsorbed on a Diaion HP‐20 resin at pH 5. The retained metal ions on the resin were eluted by acetone. The analytical parameters such as pH of the sample, eluent type and volume, sample volume, and flow rates of the solution and the eluent were investigated. The influences of concomitant ions on the recoveries of the analytes were also examined. The instrumental detection limits for the analytes after application of the presented solid‐phase extraction procedure were in the range of 0.72–1.41 µg/L. The validation of the presented procedure was checked by analyzing certified reference material of SRM1515 Apple Leaves. The procedure was performed by analyzing some spice samples.