Removal of Basic Textile Dyes in Single and Multi‐Dye Solutions by Adsorption: Statistical Optimization and Equilibrium Isotherm Studies

The removal of three basic dyes by adsorption onto bentonite was investigated for single, binary, and ternary solutions in a batch system. Before and after dye adsorption, bentonite samples were analyzed by using X‐ray fluorescence spectrometer, SEM, and Fourier transform IR spectrometry. The D‐optimal design and response surface methodology were applied in designing the experiments for evaluating the interactive effects of each initial concentrations variable of the dyes in binary systems. Predicted values were found to be in good agreement with experimental values, which defined propriety of the model and the achievement of D‐optimal in optimization of adsorption of binary dye systems. The competitive adsorption results showed that the adsorption amount of a dye was suppressed in the presence and increasing concentrations of second or third dye. For mono‐component isotherm modeling, Langmuir and Freundlich models were applied to equilibrium data of single, binary, and ternary dye solutions, while modified Langmuir, Sheindrof–Rebhun–Sheintuch and modified extended Freundlich models were also applied to equilibrium data of binary dye solutions for multi‐component isotherm modeling. The results showed that the Langmuir was the more suitable model for single dye systems while extended Freundlich model fitted best to the experimental data with the lowest error values for multi‐dye systems.     

Control of Hydrogen Sulfide by a Wire‐Tube Dielectric Barrier Discharge AC Plasma Reactor

Destruction of hydrogen sulfide by a wire‐tube dielectric barrier discharge (DBD) AC plasma reactor was carried out at atmospheric pressure and room temperature. Six aspects, effect of applied voltage, initial H₂S concentration, gas flow rate, pellets in the reactor, DBD reactor materials, and DBD dielectric thickness on H₂S removal efficiency were investigated. Furthermore, specific energy density (SED), absolute removal amount (ARA), and energy yield (EY) during the discharge process were investigated at the same time. In addition, ozone generation during the decomposition of H₂S was also studied. Experimental results demonstrated the application of DBD AC plasma was an effective technology for odor elimination.     

Removal of Nitro Aromatic Compounds from 2,4,6‐Trinitrotoluene Red Water Using 1,2‐Ethanediamine Modified Macroporous Polystyrene Microspheres

To remove nitro aromatic compounds (NACs) from 2,4,6‐trinitrotoluene (TNT) red water, large‐pore‐size (pore size = 200 nm) polystyrene (PSt) microspheres were activated with chloroacetyl chloride followed by reaction with 1,2‐ethanediamine (EDA). Fourier transform IR analyses showed that the amino group was introduced onto PSt microspheres. Determination of the total amino group and primary amino densities suggested that the imino group was the functional group of EDA–PSt. Scanning electron microscope images and mercury porosimetry measurements indicated that the pore structure was well maintained during the reaction. After adsorption with EDA–PSt, 98.5% chemical oxygen demand and 99% acute toxicity of TNT red water was removed. As shown by HPLC and GC–MS, all the neutral and acid NACs in TNT red water were removed by EDA–PSt, while the basic NACs were not. The results showed that hydrogen bonding and electrostatic attraction were involved in adsorption. The adsorbed neutral and acid NACs were eluted using methanol and 0.1 mol L^?1 NaOH, respectively.     

Competitive Adsorption of Nickel and Copper Ions from Aqueous Solution Using Nonliving Biomass of the Marine Brown Alga Laminaria japonica

The adsorption of nickel and copper in a bicomponent system using the nonliving biomass of the marine brown alga Laminaria japonica was investigated in batch systems as a function of initial solution pH, contact time and temperature. The adsorption of nickel and copper was strongly pH dependent. Kinetic studies pointed to a rapid uptake with an equilibrium time of about 30 min. The kinetic curves were successfully fitted by linear regression to pseudo first and pseudo‐second‐order equations. The equilibrium data was analyzed using several models, including the extended Langmuir equation, modified extended Langmuir model and combined extended Langmuir‐Freundlich model. The results suggested that the competitive adsorption of nickel and copper at all temperatures was best represented by the combined extended Langmuir‐Freundlich isotherm. The isotherms indicated competitive uptake, with copper being preferentially adsorbed followed by nickel with an increase in the amount of solute in solution. Thermodynamic analysis revealed that the simultaneous adsorption of nickel and copper ions could be considered to be a spontaneous, endothermic process, with increased randomness.     

Magnetic Removal of Reactive Black 5 from Wastewater Using Ionic Liquid Grafted‐Magnetic Nanoparticles

Due to the unique chemical properties and therefore wide range of applications, significant amounts of reactive dyes often end up in waste waters and this issue raises the need for more efficient treatment technologies. This work investigates the ability of magnetite nanoparticles functionalized with imidazolium based ionic liquid (IL) as an efficient sorbent for the removal of the Reactive black 5 from wastewater. Fourier transform infrared spectroscopy, X‐ray diffraction, transmission electron microscopy, thermo‐gravimetric analysis, and zeta potential measurement were used to characterize the synthesized nanosorbent. The results showed that under optimal conditions, the dye removal efficiency of the grafted IL is 98.5% after a single run. Regeneration of the used sorbent could be possible and the modified magnetic nanoparticles exhibited good reusability. The isothermal data of RB5 sorption conformed well to the Langmuir model and the maximum sorption capacity of IL@Fe₃O₄ for RB5 was 161.29 mg g^?1. Thermodynamic study indicated that the adsorption is endothermic and spontaneous. The use of such a system can provide fast and efficient removal of the reactive dyes from wastewater by using an external magnetic field.     

Adsorption of Complex Pollutants from Aqueous Solutions by Nanocomposite Materials

In view of water pollutants becoming more complex, both anionic and cationic pollutants need to be removed. The multi‐pollutants simultaneous removal is paid more and more attention. Hence, development composite materials for treatment complex wastewater are the aim of this study. In this research, iron–nickel nanoparticles deposited onto aluminum oxide (α‐Al₂O₃) and carbon nanotubes (CNTs) to form nanocomposite materials Fe–Ni/Al₂O₃ and Fe–Ni/CNTs, respectively, were used as adsorbents. The adsorption capacities of Fe–Ni/Al₂O₃ and Fe–Ni/CNTs for AO7, HSeO, and Pb²⁺ were observed to be 5.46, 8.28, 27.02, and 25.6 mg/g, 15.29 and 17.12 mg/g, separately. The composite materials with negative charges were superior in adsorption of anionic pollutants. Using orthogonal experimental design and analysis of variance to co‐treat dye AO7, HSeO and Pb²⁺ in aqueous solutions, seven testing factors were included: (1) adsorbent types, (2) amount of iron, (3) solution pHs, (4) AO7 concentrations, (5) Pb²⁺ concentrations, (6) HSeO concentrations and (7) reaction time. The experimental results showed that the removal of complex pollutants AO7, HSeO, and Pb²⁺ on Fe–Ni/CNTs could reach up to 90% in the optimal treatment conditions. When using Fe–Ni/CNTs as the adsorbent, the sorption isothermals were well fitted in the Freundlich isotherm, and R² could reach up to 0.98.     

Removal of the Alphazurine FG Dye from Simulated Solution by Electrocoagulation

The removal of Alphazurine FG (AF) dye from water by an electrocoagulation process has been studied. The effect of some operational parameters, such as anode material, current density, initial dye concentration, pH of solution, conductivity, and inter‐electrode distance, on the removal efficiency was investigated. Iron and aluminum were used as anodes in the electrocoagulation cell. It was found that the efficiency of the iron anode was better than that of the aluminum anode for AF removal. The factors that affected the removal efficiency were the current density and the initial dye concentration. The removal efficiency increased from about 35% at 25 A m^–2 to about 97% at 100 A m^–2, during 4 min of electrocoagulation. The results exhibited pseudo‐first‐order kinetics for AF removal by electrocoagulation. In addition, a mathematical model was successfully established for predicting the removal efficiency. A comparison between the model results and experimental data gave a high correlation coefficient (R² = 0.9925), which indicates that the model is able to predict the removal efficiency of AF.     

Adsorption of Cadmium from Aqueous Solution by Ficus religiosa Leaf Powder and Characterization of Loaded Biosorbent

The present investigation evaluates the adsorption effectiveness of Cd(II) ions on Ficus religiosa leaf powder (FRL). The experimental parameters chosen included time, pH, particle size, temperature, adsorbate, anion, and Pb(II) concentrations. The time data followed pseudo‐second‐order kinetics. Cd(II) adsorption increased from 1.38 to 75.17% with the increase in pH from 2 to 4 and further increase in pH to 5.5 resulted in its marginal increase to 77.52%. Based on regression coefficient values, the isothermic data fitted the various models in the order Langmuir > Redlich–Peterson > Temkin > Freundlich model. The maximum loading capacity of FRL was estimated to be 27.14 mg g^?1. The presence of Cl^?, , or Pb²⁺ exhibited adverse effect on Cd(II) uptake. The thermodynamic parameters of enthalpy (ΔH⁰) and entropy (ΔS⁰) were estimated to be 8.31 kJ mol^?1 and 38.22 J mol^?1 K^?1, respectively. SEM‐EPMA of the loaded FRL showed Cd(II) distribution at specific sites. The XRD patterns of Cd(II) loaded FRL sample showed disappearance of some peaks corresponding to β‐Ca(PO₃)₂; shifting of peaks and decrease in %RI corresponding to γ‐CaSO₄ phase. Positive shift of IR bands for the Cd(II) loaded sample was observed.     

Removal and Recovery of Molybdenum from Aqueous Solutions by Adsorption onto Surfactant‐Modified Coir Pith,a Lignocellulosic Polymer

Coconut coir pith, a lignocellulosic polymer, is an unwanted by‐product of the coir fiber industry. The pith was used as a biosorbent for the removal of Molybdenum(VI) after modification with a cationic surfactant, hexadecyltrimethylammonium bromide. The optimum pH for maximum adsorption of Mo(VI) was found to be 3.0. Langmuir, Freundlich and Dubinin Radushkevich isotherms were used to model the adsorption equilibrium data and the system was seen to follow all three isotherms. The Langmuir adsorption capacity of the biosorbent was found to be 57.5 mg g^–1. Kinetic studies showed that the adsorption generally obeyed a second‐order kinetic model. Desorption studies showed that the recovery of Mo(VI) from the spent adsorbent was feasible. The effect of foreign anions on the adsorption of Mo(VI) was also examined.     

Response Surface Modeling of Cu(II) Removal from Electroplating Waste by Adsorption: Application of Box–Behnken Experimental Design

The use of kaolinite‐based clay minerals as a low‐cost natural adsorbent for the removal of Cu(II) from electroplating waste leachate was studied. Batch experiments were conducted to determine the effects of varying adsorbent loading, initial pH, adsorbent dosage, and contact time. Box–Behnken design with three variables like initial pH, adsorbent dosage, and contact time at three different levels was studied to identify a significant correlation between the effects of these variables to the amount of Cu(II) adsorbed. The methodology identifies the principal experimental variables, which have the greatest effect on the adsorption process. After optimizing the input variables by using Simplex algorithm, the adsorption of Cu(II) was maximal (99.9% with a maximum (positive) standard deviation of 9.4) at pH 6.24, adsorbent dosage of 0.83 g L^?1, and contact time of 97 min, respectively. Furthermore, the experimental values are in good agreement with predicted values, the correlation coefficient and adjusted correlation coefficients were found to be 0.96 and 0.87, respectively.