The potential of portable luminescence readers in geomorphological investigations: a review

The development of functional portable optically stimulated luminescence (OSL) readers over the last decade has provided practitioners with the capability to acquire luminescence signals from geological materials relatively rapidly, which allows for expedient preliminary chronostratigraphic insight when working with complex depositional systems of late Quaternary age. Typically, when using the portable OSL reader, infrared (IR) or blue post-IR OSL signals are acquired from bulk unprocessed materials, in contrast to regular luminescence dating, which is usually based on measurements on pure quartz or feldspar mineral separates, or on select silt-sized polymineralic portions. To demonstrate the utility of portable OSL measurements, this paper outlines the basic features of portable OSL readers and their constraints. Subsequently, case studies in which the instrument has been used to elucidate cryptostratigraphic variations in sedimentary sequences for geomorphological applications are reviewed. The studies can generally be grouped into three main categories. The first includes studies where the variation of portable OSL reader luminescence signal intensities with depth are plotted to generate profiles that contextualize sediment stratigraphy. In the second group, portable OSL reader luminescence signal intensities are used to interpret sediment processes that shed light on depositional histories. In the last category, luminescence signals from the portable OSL reader are calibrated to approximate numerical burial ages of depositional units. The paper concludes with a discussion of possible future directions. © 2020 John Wiley & Sons, Ltd.     

Quartz OSL sensitivity from dating data for provenance analysis of pleistocene and holocene fluvial sediments from lowland Amazonia

The properties of the quartz luminescence signal have been shown to be a useful tool for sediment provenance analysis. These provenance studies are based on the sensitivity of the fast optically stimulated luminescence (OSL) component, which is also used for sediment dating. Besides the widespread occurrence of quartz in terrigenous sediments, OSL sensitivity can be acquired using relatively fast and low-cost measurements compared to sediment provenance analysis methods based on accessory minerals or isotopes. Additionally, laboratories worldwide already have an extensive database of recorded quartz OSL signals primarily measured for dating studies, and these data could potentially be repurposed for provenance analysis of Quaternary sedimentary systems through OSL sensitivity calculation. Here, we investigate the use of OSL quartz signals measured in sediment dating surveys for OSL sensitivity calculation and evaluation of changes in sediment sources. The OSL sensitivity was calculated and expressed as %BOSL_F, which corresponds to the percentage of the fast OSL component signal (blue stimulation) to the total OSL curve; such approach is advantageous as it does not require any normalisation of the measured signal intensity to dose or aliquot size (weight). Three sets of samples from Amazonian fluvial sediments are investigated: two sets of Holocene floodplain sediments representing different sediment sources to the Amazonian fluvial system, i.e. the Amazon craton and the Andes Mountain belt, and a set of samples from the Içá Formation, a paleo-fluvial system active during the Pleistocene whose provenance is not fully known. Results show that the quartz OSL signal derived from the first test doses (T_n) applied in dating protocols had the best performance for %BOSL_F calculation when compared to results from a measurement protocol designed specifically for sediment provenance analysis. There is significant correlation (R² = 88) between sensitivities derived from T_n and a specific OSL provenance analysis protocol. The proposed approach indicates to be appropriate for sediment provenance analysis since it is able to discriminate signal differences among samples from known sources: Brazilian cratonic quartz yield high sensitivity values (mean %BOSL_F >70), in contrast to the relatively lower values from Andean quartz (mean %BOSL_F <50). In general, quartz OSL sensitivities from the Içá Formation samples fall into the same range of modern sediments transported by the Içá and Japurá rivers draining the Andean Eastern Cordillera of Colombia and Ecuador. We also observe a decrease in quartz OSL sensitivity during the Holocene, notably after 4 ka, with younger deposits showing lower sensitivity. Sediment provenance variations are discussed in terms of watershed rearrangement and/or precipitation-driven changes during the Late Pleistocene and Holocene across Amazonia.     

Single-grain optically stimulated luminescence dating of quartz temper from prehistoric Intermountain Ware ceramics,northwestern Wyoming,USA

This study applies single-grain optically stimulated luminescence (SG OSL) dating of quartz sand temper to Intermountain Ware ceramics recovered from four archaeological sites in northwestern Wyoming, USA. We show that SG OSL dating can strengthen and further refines existing archaeological site chronologies in certain settings. The SG OSL results are compared to multi-grain infrared stimulated luminescence (IRSL) dating of the polymineral (feldspar and quartz) silt fraction in the ceramic paste of the same sherds. Results from the two methods are statistically indistinguishable, although coarse-grained quartz SG OSL ages have consistently lower standard error terms due to higher relative sensitivity and avoidance of anomalous fading calculations. Moreover, the SG OSL results produced precision at two-sigma standard error greater than or equal to associated calibrated radiocarbon ages. SG OSL dating of quartz temper from Intermountain Ware ceramics provides more reliable site occupation timing than radiocarbon dating, which can be conditioned by incorporation of old wood and contamination from young soil carbon. This study highlights the importance of SG OSL dating on sherds from buried contexts when exposure to wildfires may have occurred, as ceramics recovered from the ground surface of one site after a high-intensity fire produced near-modern apparent ages, suggesting they were thermally reset during the fire. We suggest SG OSL should be applied to date similar ceramics with quartz temper to determine site age and bolster regional chronologies.     

Violet stimulated luminescence as an alternative for dating complex colluvial sediments in the Atacama Desert

Luminescence dating has become a key tool in studies of the Quaternary. The typically stable luminescence response of quartz grains and the absence of a significant internal dose, make quartz minerals the preferred dosimeter for monitoring the burial dose in sediments. Unfortunately, the reliability of conventional OSL (optically stimulated luminescence) dating, based on blue stimulation, can be compromised when the luminescence decay is not dominated by a rapidly decaying and stable part of the luminescence signal (i.e. the fast component). On the other hand, standard methods in luminescence dating are limited to ages of a few hundred kiloyears. In this study, violet stimulated luminescence (VSL) has been used as a means to overcome both problems, applied to a series of colluvial deposits in the Atacama Desert, Chile. Quartz from this region, characterized by poor blue-OSL response, showed a reproducible and stable VSL signal capable of recovering given doses up to ∼500 Gy and a saturation dose twice as high as conventional OSL. The VSL response from these samples has been studied in detail and the estimated ages have been compared with an already established chronology for the same site, based on IRSL of potassium feldspar single grains. Results agree for the dose range of the profile studied, ∼100–250 Gy, equivalent to ages of 29–79 ka confirming the suitability of VSL for dating sedimentary quartz with unreliable blue-OSL response and to extend the age range of conventional OSL dating.     

Optical dating of aeolian and fluvial sediments in north Tian Shan range,China: Luminescence characteristics and methodological aspects

Loess and fluvial sand are important materials for dating river terraces and alluvial fans. This study focuses on the methodological aspects of dating loess and fluvial deposits from the northern flank of the Tian Shan range, China, using sand-sized quartz and potassium (K) feldspar. Luminescence characteristics of quartz and K-feldspar were studied for searching suitable dating procedures. Our results indicate that 1) most quartz aliquots were contaminated by feldspar, and were dated using a post-infrared optically stimulated luminescence (post-IR OSL) procedure. A Fast ratio acceptance threshold of 15 can be applied to select these aliquots with post-IR OSL signals dominated by quartz OSL; 2) the multi-elevated-temperature post-IR IR stimulated luminescence (MET-pIRIR) procedures are applicable for K-feldspar. A test dose of ∼30% of the natural dose is appropriate for dating of older (>10 ka) samples. An Age (T, t) plateau test can be used to evaluate the dating results; 3) for the loess samples, both quartz and K-feldspar were well bleached and are suitable for dating. Dating using K-feldspar is preferred for its higher efficiency; 4) for the fluvial sand samples, only the quartz grains were fully bleached. Single-aliquot dating of quartz gives reliable ages.     

OSL and IRSL dating of raised beach sand deposits along the southeastern coast of Norway

Raised beach sand deposits along the southeastern coast of Norway were dated by optical (OSL) and infrared stimulated luminescence (IRSL) and the quartz and K-feldspar luminescence characteristics were described. Due to the poor quartz luminescence characteristics, only a limited number of samples were suitable for OSL dating. More promising are the K-feldspar extracts, with typical K-feldspar luminescence characteristics and no sign of fading. For equivalent dose (D_e) determination, sand-size quartz and feldspar extracts were used, applying a single aliquot regenerative (SAR) protocol. Both, OSL and IRSL D_e estimates show a wide distribution, unexpected for beach deposits. The calculated OSL and IRSL age estimates were generally in good agreement and the correctness of the ages was confirmed by independent age control. Because only a limited number of the quartz samples were suitable for OSL dating, IRSL dating of the K-feldspar represents an alternative to OSL quartz dating.     

Validating post IR-IRSL dating on K-feldspars through comparison with quartz OSL ages

Recent developments have opened up the possibilities of using potassium feldspar for dating Pleistocene sediments; a stable (less-fading) part of the infrared stimulated luminescence (IRSL) signal can be selected by largely depleting the unstable part of the IR signal, using a combination of thermal and IR stimulation: post IR-IRSL dating (pIR-IRSL).This study aims to test the validity of pIR-IRSL dating on feldspars. We obtained pIR-IRSL ages on a large suite of samples from several locations in the Netherlands area, covering a wide range of depositional environments and ages. Age control was provided by quartz optically stimulated luminescence (OSL) ages on the same samples; these ages were shown to accord with geological age constraints. Comparison with IRSL ages enabled us to evaluate the improvement that pIR-IRSL dating provides over conventional IRSL methods.The majority of feldspar ages obtained with pIR-IRSL showed good agreement with both the quartz OSL ages and the geological age constraints. Our study demonstrates that pIR-IRSL dating is more robust than conventional IRSL and should be the method of choice in feldspar luminescence dating of Pleistocene sediments.     

Optical dating of Holocene lake sediments: Elimination of the feldspar component in fine silt quartz samples

Optically stimulated luminescence of fine silt quartz was investigated to establish chronologies for lake sediments from the British Isles. Feldspar contamination and its potential effects on equivalent dose (D_e) determination were examined. A new feldspar contamination test based on the thermal quenching of quartz OSL and thermal assistance of feldspar OSL identified feldspar contamination in samples being treated for 20 min in 20% hydrofluoric acid. Feldspar component monitoring based on the post-IR OSL/OSL ratio was not sufficiently sensitive to monitor a feldspar component, but is a good indicator whether a standard SAR procedure can be applied successfully, despite the presence of feldspar. Based on these results we used a modified SAR protocol including a 100 s IRSL stimulation at 50 °C before OSL readout. This protocol could overcome any malign effects of feldspar even for a feldspar bearing polymineral sub-sample.     

Assessing the potential of luminescence dating for fault slip rate studies on the Garlock fault,Mojave Desert,California, USA

Although there has been significant advancement of OSL (optically stimulated luminescence) dating of quartz and feldspar over the past decade, the luminescence characteristics of quartz grains in many tectonically active areas are not suitable for accurate age determinations using this technique. This study investigates the reasons for this unsuitability and tests a new measurement protocol (ITL), which appears more promising. At two sites along the central Garlock fault in the Mojave Desert, California, USA, samples collected for OSL dating for this study have proven problematic. At the El Paso Peaks (EPP) trench site, a sequence of OSL samples was collected from sandy units with a well-established radiocarbon chronology, providing the opportunity to assess different approaches and optimize our luminescence dating procedures. At Christmas Canyon West (CCW), where future Garlock fault slip rate studies will be conducted using luminescence dating, samples were collected to assess the luminescence characteristics of both quartz and feldspar in this environment. At both sites, signals from quartz and K-feldspar grains are consistently dim. At EPP, quartz results provide age underestimates, while K-feldspar IRSL yields erratic values; the causes of this problematic behavior are unclear. Preliminary minimum isothermal thermoluminescence (ITL) signals of K-feldspar measured during preheating appear to be consistent with the radiocarbon age estimates, demonstrating potential for accurate age determination in this kind of environment using this protocol.     

A test case for anomalous fading correction in IRSL dating

Infrared-stimulated luminescence (IRSL) dating of feldspars has the potential to date deposits beyond the age range of quartz optical (OSL) dating. Successful application of feldspar IRSL dating is, however, often precluded due to anomalous-fading, the tunnelling of electrons from one defect site to another. In this paper we test procedures proposed for anomalous-fading correction by comparing feldspar IRSL and quartz OSL dating results on a suite of samples from continental deposits from the southeastern Netherlands. We find that even after anomalous-fading correction IRSL ages underestimate the burial age of the deposits and argue that this may be a consequence of a dependency of anomalous fading rate on the dose rate and on the absorbed dose.     

Evaluating the effectiveness of heavy liquid density separation in isolating K-feldspar grains using alluvial sediments from the Hajar Mountains,Oman

Heavy liquid density separation is commonly utilised in isolating specific minerals from bulk sediment for luminescence dating. K-feldspars are commonly separated from other minerals by isolating the <2.58 g cm⁻³ fraction which yields infrared stimulated luminescence (IRSL) signals conducive to dating. However, initial measurements of the IRSL and thermoluminescence (TL) signals from the <2.58 g cm⁻³ fraction of alluvial fan sediments from the Hajar Mountains, northern Oman, were atypical of K-feldspar luminescence signals reported in the literature. In this study, three different density separates (<2.58 g cm⁻³, 2.58–2.54 g cm⁻³ and <2.565 g cm⁻³) were trialled to attempt to isolate pure K-feldspar samples for dating, to measure K-feldspar IRSL signals which are not contaminated with inputs from other feldspar, quartz and/or heavy mineral signals. The mineralogy of these separates was explored using microscopy, X-ray diffraction and mass spectrometry. We found that despite more refined heavy liquid density separation, the proportions of K-feldspar in these separates had a maximum of 40% by weight, remaining significantly contaminated by other minerals. IRSL and TL signals were atypical of K-feldspar for all density separates and it is likely that there is a contribution of signal from IR-sensitive contaminants, such as muscovite. This highlights the importance of investigating the mineralogy of samples for luminescence dating, especially in regions where little prior work has been undertaken.     

Problems associated with luminescence dating of Late Quaternary glacial sediments in the NW Scottish Highlands

Linking the timing of glacial episodes and behaviour to climatic shifts that are documented in ice and marine sedimentary archives is key to understanding ocean-land interactions. In the NW Scottish Highlands a large number of closely spaced (‘hummocky’) moraines formed at retreating glacier margins. Independent age control on one palaeo-glacier limit is consistent with the timing of Younger Dryas (YD) glaciation in the area, but adjacent glacier lobes have remained undated due to the lack of sites and material for ¹⁴C dating. Direct dating of ice-marginal moraines using optically stimulated luminescence (OSL) techniques has never been attempted before in Scotland, but if successful, they may be the most appropriate methods for constraining the age of sediment deposition in the absence of organic material. Coarse-grained quartz and K-feldspar minerals from supraglacial sheet flow deposits and glacilacustrine sediments within ice-marginal moraines were analysed using the single-aliquot regenerative-dose (SAR) protocol. Independent age control and clear geomorphological relationships indicate that all samples should yield YD or post-Last Glacial Maximum (LGM) ages. Quartz OSL shine down curves showed low luminescence sensitivity, significant medium-to-slow components, a weak fast component, and scattered SAR data; Linearly Modulated-OSL (LM-OSL) measurements confirmed that the fast component was weak or absent. In contrast, feldspar infrared stimulated luminescence (IRSL) was highly sensitive with excellent SAR data. However, SAR data from 3 mm diameter aliquots of feldspar (200 grains) give higher than expected equivalent doses (D_e) by an order of magnitude. SAR measurements of small clusters of feldspar grains (ranging from 1–8) considerably broaden the apparent D_e distribution, but even the lowest value is about 2–3 times the expected D_e. Two possibilities arise to explain the quartz and feldspar data: (1) that glacial sequences in the NW Highlands re-work inherited (older) glacial deposits and that some of the pre-Devensian existing glacial landforms have only been modified during Devensian glaciation; or (2) that the sedimentary processes operating in these ice-marginal environments are not conducive to adequate bleaching of quartz and feldspar grains. Our study implies that ice-proximal supraglacial sediments from this region in NW Scotland reflect older ages of deposition, but dating YD sediments has not been possible.     

Luminescence characteristics of Scandinavian quartz,their connection to bedrock provenance and influence on dating results

The success of optically stimulated luminescence (OSL) dating relies to a large extent on suitable characteristics of the analysed mineral, in this case quartz. Previous OSL dating of Quaternary sediments in Scandinavia has shown that quartz characteristics vary widely across the region, resulting in dating studies with varied success. The aim of this study is to provide an overview of quartz luminescence characteristics in Sweden and Norway, evaluate their effect on dating results and discuss the underlying causes of their variability.A qualitative assessment of luminescence signal characteristics of quartz from Late Quaternary sediment deposits, from a range of geological and geographical settings, has been made by re-analysing data from samples previously dated at the Lund Luminescence Laboratory, Sweden. This allowed a general characterisation of signals and a study of the relationship of these properties to dating result ‘quality’. To quantify the results, selected samples were further analysed with single-grain measurements and with small aliquots.The results show that the average luminescence signal from quartz is fairly dim but dominated by a fast signal component and changes little during measurement. Dose determination precision is ∼4% for 8-mm aliquots and ∼6% for 2-mm aliquots. However, the luminescence signal characteristics have a spatial variation across Sweden and Norway, which appears to correlate with large-scale bedrock units. In areas of sedimentary bedrock outside the Scandinavian mountains and within the Blekinge-Bornholm province, the quartz is brighter and has a stronger fast signal component, while in the Caledonian orogenic belt, the signal is very weak and lacks a fast component. These differences lead to a range in precision of doses, from ∼2% to >40% (for doses in the order of 5–400 Gy), and in the number of rejected aliquots (0–100%) depending on location, but also implies that quartz luminescence can be used as a provenance indicator in part of Sweden and Norway.     

Luminescence dating of an Upper Pleistocene alluvial fan and aeolian sandsheet complex: The Senne in the Münsterland Embayment,NW Germany

An up to 15 m thick alluvial fan and aeolian sandsheet complex is exposed in the upper Senne area, on the southern slope of the Teutoburger Wald Mountains (NW Germany). The origin and age of these deposits have been controversially discussed for many years, ranging from Saalian glaciofluvial to periglacial Weichselian deposits. In order to provide a high-resolution chronological framework for the deposits, we conducted luminescence dating of 12 samples from two localities (Oerlinghausen and Augustdorf pits). Both coarse-grain potassium-rich feldspar and quartz minerals were used for luminescence dating. Feldspar was measured using an elevated temperature post-IR infrared stimulated luminescence (IRSL). Quartz was measured using optically stimulated luminescence (OSL) with a conventional single aliquot regenerative dose (SAR) protocol. Feldspar results tend to overestimate quartz ages for the lower part of the sections (alluvial plain and alluvial fan facies) but are consistent with quartz ages for the upper part of the sections (aeolian facies). Quartz ages from both central and minimum age models suggest deposition during the Late Pleistocene Pleniglacial to Late Glacial.     

Delineating stratigraphic breaks at the bases of postglacial eolian dunes in central Alberta,Canada using a portable OSL reader

Temporal constraints for the Late Pleistocene deposition of eolian dunes that occur in central and northern Alberta, Canada can be provided by dating sediments from the dune bases using luminescence techniques. In places, however, the postglacial dunes overlie glaciofluvial sands that resemble the eolian deposits in texture such that demarcating the bases of the dunes is often problematic. In this study we address the problem by employing a portable optically stimulated luminescence (OSL) reader to construct luminescence profiles that depict luminescence signal variation with depth. With the portable OSL reader, measurement can be performed on bulk sediments, negating the need for laborious separation procedures to isolate pure mineral fractions, as is required in regular luminescence dating. Measurements can also be carried out in the field, permitting quicker decision making during sample collection. Results from this study, presented as depth variations of feldspar derived infrared stimulated luminescence (IRSL) signals and predominantly quartz‐generated post‐IR blue OSL signals, show that luminescence profiling enables one to distinguish between eolian deposits that make up the dunes from the underlying non‐eolian sands. The identification of such cryptostratigraphic interfaces is made possible by differences in the dosimetric histories of the sediments. The delineation of the dune bases allows targeted sampling that yields best luminescence age approximations for the initiation of postglacial eolian deposition in the region. Luminescence profiling of eolian sequences would also, in theory, permit the identification of depositional breaks of extended duration. Copyright © 2012 John Wiley & Sons, Ltd.     

Testing the application of quartz and feldspar luminescence dating to MIS 5 Japanese marine deposits

The applicability of both quartz and feldspar luminescence dating was tested on twenty-five samples from a marine succession now forming a coastal cliff at Oga Peninsula, Honshu Island, Japan. The quartz optically stimulated luminescence (OSL) signal shows thermal instability and linear modulated (LM)-OSL analysis revealed the dominance of a slow component. When compared with independent age control provided by two marker tephras, the quartz OSL ages grossly underestimate the depositional age. In contrast, potassium (K)-rich feldspar is a suitable dosimeter when measured using post-IR infrared stimulated luminescence (IRSL) at 225 °C (pIRIR₂₂₅). Scanning electron microscope (SEM) analyses on the feldspar extracts revealed that the grains are amorphous with small crystalline inclusions; using standard internal dose rate parameters, this would result in a too large dose rate. Dose rates were calculated using the observed grain size of 40 ± 20 μm with an assumed K concentration of 12.5 ± 0.5%. The fading corrected pIRIR₂₂₅ ages agree well with independent age control, and the sediments of the Katanishi Formation were deposited between 82 ± 6 and 170 ± 16 ka. This study demonstrates that pIRIR dating of feldspar is a powerful chronological tool for the dating of sediments of volcanic origin.     

Luminescence dating of marine sediments from the Sea of Japan using quartz OSL and polymineral pIRIR signals of fine grains

Luminescence dating has long been used for chronological constraints on marine sediments due to the ubiquitous dating materials (quartz and feldspar grains) and its applicability over a relatively long time range. However, one of the main difficulties in luminescence dating on marine sediments is partial bleaching, which causes age overestimations. Especially, partial bleaching is typically difficult to be detected in the fine grain fraction (FG) of marine sediments. The recently developed feldspar post-IR IRSL (pIRIR) protocol can detect non-fading signals and thus avoid feldspar signal instability. In the current study, fine grains were extracted from a gravity core in the northern Sea of Japan, and the aim is to test the feasibility of using different luminescence signals with various bleaching rates to explore the bleaching conditions of fine grain fraction in marine sediments. The results suggest that the quartz OSL signal and polymineral pIRIR signals at stimulation temperatures of 150 °C and 225 °C (pIRIR₁₅₀ and pIRIR₂₂₅) of FG were well bleached prior to deposition. The OSL ages were used to establish a chronology for this sedimentary core and the resulting age-depth relationship is self-consistent and comparable with radiocarbon dates. We conclude that different luminescence signals with various bleaching rates can be used to test the bleaching conditions of fine grain fraction in marine sediments; and the luminescence dating can be applied to marine sediments with great potential.     

Optimization of laboratory illumination in optical dating

As part of the development of new laboratory lighting, we present a methodological approach applicable to the characterization of any light source intended for illumination in optical dating laboratories. We derive optical absorption cross-sections for quartz and feldspar from published data and compare these with the human eye response. The optimum peak wavelength giving the best clarity for non-dark adapted vision for the least trapped charge loss lies within the wavelength range 590–630 nm; we argue that it is unnecessary to consider dark-adapted vision. The predicted relative decay rates of quartz optically stimulated luminescence (OSL) and feldspar infrared stimulated luminescence (IRSL) signals by an incandescent light bulb and a compact fluorescent lamp (CFL) through an ILFORD 902 filter are first derived. These predicted decay rates are then compared with those of three relevant light-emitting diodes (LEDs); this comparison demonstrates the significant advantage of the LED sources over the filtered light sources, because essentially all of the reduction of both OSL and IRSL signals by the LEDs occurs at wavelengths to which the human eye is most sensitive. We conclude that exposure of quartz and feldspar extracts from various samples to the light from an LED with emission peak at 594 nm results in a ≤1% OSL or IRSL signal loss for a 48-h exposure at a power density of ∼0.2 μW.cm⁻².     

Investigating the optically stimulated luminescence dose saturation behavior for quartz grains from dune sands in China

The optically stimulated luminescence (OSL) signals from quartz have been widely used to estimate the equivalent dose (D_e) of environment radiation after the deposition of mineral grains. However, the usage of quartz is often limited due to the lower saturation behavior compared with feldspar. Saturation limits among quartz (defining the upper dating range) vary significantly. It is important to better understand the reason for various dose saturation behaviors of the quartz OSL signals. In this study, coarse quartz grains were extracted from the Taklimakan Desert and the Hunshandake sandy land in north China and the dose saturation behavior of quartz OSL signals were studied. Our results suggest that the quartz grains produce very different aliquot-specific dose response curves, showing the significant variability in dose saturation characteristics for OSL signals. Laboratory dosing, optical bleaching and heating experiments were designed to simulate their effects on the dose saturation behavior for the quartz OSL. The results demonstrate that cycles of dosing and optical bleaching have insignificant impact on the OSL dose growth curves, while the heating to high temperature (above 400 °C) can significantly change the dose saturation characteristics for the quartz OSL. Such results suggest that the different heating history of quartz might be an important factor for the variability in dose saturation characteristics for OSL signals. Additionally, the quartz grains from the Hunshandake sandy land exhibit lower dose saturation level for OSL signals, compared with that from the Taklimakan Desert. This can be explained that the quartz grains from Hunshandake sandy land are mainly of igneous origin, while the quartz grains from Taklimakan Desert are mainly of metamorphic origin.     

Luminescence dating of Holocene sediment cores from a wave-dominated and mountainous river delta in central Vietnam

Sediments of river deltas provide valuable records of past coastal environments. Optically-stimulated luminescence (OSL) dating has become an alternative to radiocarbon dating for constraining the sediment chronology in large deltas that allow for sufficient sunlight bleaching of sediments during the fluvial transport. However, its applicability to smaller deltas with mountainous riverine systems has not been confirmed yet. To check this, we examine multiple signals from two Holocene sediment cores in the wave-dominated Thu Bon River delta in central Vietnam. Two cores were collected, respectively, 3.9 km and 1.2 km inland from the present shoreline and both show a >-25-m thick succession of coarsening-upward mud to sand deposits. Coarse grains (180–250 μm in diameter) of quartz and K-feldspar, and fine grains (4–11 μm in diameter) of quartz and polymineral were extracted from the upper and lower parts of the cores for multi-grain measurements of quartz OSL, and of feldspar infrared-stimulated luminescence (IRSL) at 50 °C (IR₅₀) and post-IR IRSL at 175 °C (pIRIR₁₇₅) to determine burial ages. In addition, facies analysis and radiocarbon dating were conducted. The landward core consists of transgressive to early regressive estuarine and prodelta facies, which is overlain by a sandy beach-shoreface facies. The seaward core consists of a relatively simple shallowing-upward succession from muddy prodelta facies to sandy beach-shoreface facies. All luminescence ages except for pIRIR₁₇₅ of fine grains are mostly consistent with the radiocarbon ages. Instead, pIRIR₁₇₅ ages of fine grains are significantly overestimated with variable offsets. OSL and IR₅₀ of fine grains provide reasonable age estimates, as these grains were likely well bleached during the transport even along a short and steep mountainous river. Consistent age estimates of all signals from sand indicate that sand was well-bleached in the beach and shoreface owing to the frequent sediment reworking by waves and currents. These results support the hypothesis that luminescence dating is applicable to Holocene wave-dominated deltas and reiterate that comparing different luminescence signals is an effective way to check reliability of the age estimates in environments where the sunlight bleaching is not ensured.