Testing the applicability of a standardized growth curve (SGC) for quartz OSL dating: Kalahari dunes,South African coastal dunes and Florida dune cordons

Standardized growth curves (SGCs) have recently been developed as a means to reduce measurement times when determining palaeodoses in the standardized luminescence (OSL) dating of quartz, but this approach is not without its critics. We test the performance of SGCs derived from samples from a range of environments in southern Africa and Florida (United States of America). Data presented here suggest that the method performed well when determining low (<50 Gy) equivalent dose (D_e) values from samples with different geological provenances within South Africa. However, the application of an SGC built from South African data performed poorly when used to estimate the palaeodoses of samples from Florida, with seven out of ten samples failing to replicate the single aliquot regenerative (SAR)-derived D_e value to within ±10%. We thus advocate the use only of regionally based SGCs for full D_e determination, although SGCs can also be utilized as a way of quickly generating SAR ‘range finders’ irrespective of sample origin. Furthermore, one sample from the Florida site did not show regenerative growth in accordance with any samples from either the South Africa or Florida data, resulting in significant D_e underestimation when using the SGC. Although the reasons for such behaviour are not yet understood, this re-iterates the recommendation of Burbidge et al. [2006. D_e determination for young samples using the standardised OSL response of coarse-grain quartz. Radiation Measurements 41(3), 278], to incorporate a single regenerative step in SGC protocols in order to check consistency.     

Effects of the size of the test dose on the SAR protocol for quartz optically stimulated luminescence dating of loess in the eastern Tibetan Plateau

Dating of quartz by optically stimulated luminescence (OSL) has been revolutionized with introduction of the test dose (TD) in development of a measurement sequence known as the single-aliquot regenerative-dose (SAR), whereby a valid sensitivity correction for the luminescence signal is provided in the measurement cycle. However, the size of the TD used in the SAR protocol remains controversial. Previous studies show that the TD has little effect on the equivalent dose (D_e) for young samples in luminescence dating in which the applicability of different deposits varies greatly in different regions. However, detailed studies are lacking on how TD size affects SAR–OSL results of samples with a relatively high D_e range. In this study, typical loess samples with high D_e values (∼60 Gy–∼250 Gy) from the eastern Tibetan Plateau were selected to investigate the effects of variation in TD size on the quartz SAR–OSL protocol. Dose recovery tests show that a known dose could be recovered successfully by applying different TDs. Test dose size has an effect on shapes of regenerated dose–response curves (DRCs) and has different influences on D_es and characteristic saturation doses for quartz samples with a high dose range. A TD size of 20%–30% D_e is a good compromise for Tibetan loess with D_e of ∼60–120 Gy in the quartz SAR protocol, and a TD size larger than 30% should be considered for samples with a larger D_e. The results of this study highlight the importance of TD size in the SAR–OSL protocol for quartz samples with a high dose range.     

Potential of establishing a ‘global standardised growth curve’ (gSGC) for optical dating of quartz from sediments

We report investigations of the optically stimulated luminescence (OSL) signals of sedimentary quartz from different regions of Asia, Africa, Europe and North America using a single-aliquot regenerative-dose (SAR) procedure. We show that variations in the shape of dose response curves (DRCs), or growth curves, of the test dose sensitivity-corrected OSL signals among single aliquots composed of multiple grains can be greatly reduced by normalising the DRCs using one of the regenerative dose OSL signals. We refer to this regenerative-dose normalisation procedure as ‘re-normalisation’. We find a common re-normalised DRC extends to doses of ∼250 Gy for samples that differ significantly in terms of geological provenance, sedimentary context and depositional age. This feature permits the development of a ‘global standardised growth curve’ (gSGC) for OSL signals from single aliquots of quartz. The equivalent dose (D_e) of an aliquot can be estimated from the natural signal, one regenerative dose signal and their corresponding test dose signals. For the variety of samples investigated, we find that D_e estimates obtained from the gSGC are consistent with those obtained using full SAR procedures for doses of up to ∼250 Gy. Use of the gSGC for single aliquots would greatly reduce the time required to estimate the D_e values of older samples and for a large number of aliquots.     

Rapid equivalent dose estimation for eolian dune sands using a portable OSL reader and polymineralic standardised luminescence growth curves: Expedited sample screening for OSL dating

Portable optically stimulated luminescence (OSL) readers are robust devices that allow rapid determination of luminescence signals of polymineralic coarse-grained samples. To date, however, the utility of portable OSL readers has largely been confined to the construction of luminescence profiles that depict variations of luminescence signal intensities with depth. Because the luminescence signals used to construct such profiles are uncalibrated, it is neither practical to quantitatively compare portable OSL data from different sites nor is it possible to approximate sample ages. Such comparisons could be facilitated by converting portable OSL signals into equivalent doses (D_e). However, determining D_e requires the construction of unique growth curves for each sample; a laborious procedure that negates the rapidity associated with portable measurements. To circumvent that limitation, we construct standardised growth curves (SGCs) using normalized regeneration dose signals obtained using a portable OSL reader from the feldspar component of polymineralic sands from five disparate eolian dune sites in Alberta, Canada. Comparison of SGCs from different samples indicates general congruence and we merge these to construct a regionally applicable curve which we test by comparing the D_e obtained from given samples with that obtained using conventional OSL dating protocols. Results show that, though the uncertainties associated with the portable OSL data are high, the D_e values from the two approaches are linearly proportional. This direct variation enables portable OSL SGC D_e values to be used independently in reconnaissance studies that aim to screen samples for more detailed analysis using standard OSL methods. The affordability of portable OSL readers suggests that the approach could be attractive to researchers who do not have ready access to conventional OSL readers.     

Investigating the applicability of a standardised growth curve approach on Middle Pleistocene sediments from northern Switzerland

The introduction of the Single Aliquot Regenerative Dose (SAR) protocol established luminescence dating as an indispensable tool in Quaternary research. A major impediment of this technique is the time required for measurements, since the protocol is repeated for various aliquots of each sample to establish a sound statistical basis. To reduce the demand on machine time, Standardised Growth Curve (SGC) approaches have been developed and successfully applied for samples from some regions. However, differences in luminescence properties require careful testing of this techniques when applied to samples with other geological background.In this study, the application of the SGC approach of Li et al. (2016) is successfully verified for multi-grain aliquots of coarse-grained quartz and feldspar samples from three sites in northern Switzerland. In-depth quality control measures ensure the reproducibility of equivalent dose (D_e) values obtained by the common SAR protocol and sample-specific SGCs. For both minerals little sensitivity was found to the re-normalisation dose and the sample-specific SGCs performed well. In contrast to other studies, no different types of dose response curve shape were observed for quartz. A minimum number of full SAR measurements of eight and six aliquots per sample has been found appropriate for quartz and feldspar, respectively. For the fading corrected feldspar signals, site-specific SGC worked well and D_e values of up to 800 Gy were consistently replicated.In summary, sample-specific SGCs for samples from northern Switzerland perform well and their application reduces measurement times by up to 70%. The construction of a regional SGC may well be beneficial, however, caution regarding the choice of given doses and curve fitting is recommended and a thorough verification of SGC results is needed before the technique is widely applied.     

Variability in quartz OSL signals caused by measurement uncertainties: Problems and solutions

We simulated the variability in measured quartz optically stimulated luminescence (OSL) signals and dose response curves (DRCs) caused by measurement uncertainties, including counting statistics and instrumental irreproducibility. We find that these measurement errors can give rise to large variations in the observed luminescence signal and contribute to among-aliquot or among-grain scatter in DRCs and equivalent dose (D_e) values. Different measurement systems (i.e., luminescence readers) may have different counting statistics properties and, hence, may exhibit differing extents of variation in the observed OSL signal, even for the same sample. Our simulation shows that the random measurement uncertainties may result in some grains or aliquots being ‘saturated’ (that is, the measured natural signal is consistent with, or lies above, the saturation level of the measured DRC) and that the rejection of these ‘saturated’ grains may result in a truncated D_e distribution, with D_e underestimation for samples with natural doses close to saturation (e.g., twice the characteristic saturation dose, D₀). We propose a new method to deal with this underestimation problem, in which standardised growth curves (SGCs) are established and the weighted-mean natural signal (L_n/T_n) from all measured grains is projected on to the corresponding SGCs to determine D_e. Our simulation results show that this method can produce reliable D_e estimates up to 5D₀, which is far beyond the conventional limit of ∼2D₀ using the standard SAR procedure.     

Investigation of the applicability of standardised growth curves for OSL dating of quartz from Haua Fteah cave,Libya

The establishment of standardised growth curve (SGC) for equivalent dose (D_e) determination can substantially reduce the amount of instrument time required for OSL measurements. In this study, we investigated the applicability of SGC for the optically stimulated luminescence (OSL) signal from single grains and small aliquots of sedimentary quartz from Haua Fteah cave, in Libya. The samples exhibit large inter-grain and inter-aliquot variation in the shape of their single grain and small aliquot dose response curves (DRCs) constructed from a range of sensitivity-corrected regenerative dose signals (L_x/T_x), which prevents the establishment of a single common SGC among different grains or small aliquots. Instead, the DRCs for the small aliquots can be divided into a minimum of three groups using the Finite Mixture Model, with the DRC saturating at a different dose level for each group. In order to establish a common DRC, or SGC, for each group, we propose a new normalisation method, the so-called least-squares normalisation procedure (‘LS-normalisation’), which largely reduces the variation between aliquots within the same group and allows the establishment of a common DRC, or SGC, for each group. In order to apply the SGC method for these samples, two regenerative dose points are needed for each aliquot to attribute it to one of the groups based on the ratio of the L_x/T_x signals for two sensitivity-corrected regenerative dose points. Equivalent dose (D_e) values for each aliquot can be estimated using the fitting parameters calculated for the SGC of the relevant group to which it belongs, together with measurements of the natural signal (L_n), one regenerative dose signal (L_x1) and their corresponding test dose signals (T_n, T_x1). For the samples investigated from Haua Fteah, we found that D_e estimates obtained from the SGCs are consistent with those obtained using a full SAR procedure. Our results suggest that small single-aliquot and single-grain D_e values obtained from application of the SGC may be underestimated if there is a significant proportion of early-saturating grains present in the sample; such grains or aliquots are mostly rejected due to saturation when analysed using the full SAR procedure. In this case, it is necessary to calculate the D_e values based only on those grains or aliquots that have relatively high saturation levels.     

Applicability of a quartz OSL standardised growth curve for De determination up to 400 Gy for lacustrine sediments from the Qaidam Basin of the Qinghai-Tibetan Plateau

The standardised growth curve (SGC) for quartz OSL has recently been developed as a practical means to reduce measurement times when determining palaeodoses using quartz of aeolian sediments, especially loess and desert sand from the same section or the same geographical area. In the present study, we test the performance of SGCs for lacustrine sediments of three cores in the Qaidam Basin of the Qinghai-Tibetan Plateau (QTP) in China. A total of nine samples were collected (three samples from each of the three cores), and silt-sized (38–63 μm) quartz was extracted for the experiment. The results demonstrated that: (a) Nine samples display similar dose–response curves up to a regeneration dose of 600 Gy using single aliquot regenerative-dose (SAR) protocol, suggesting the existence of a standardised growth curve for lacustrine sediments in the Qaidam Basin; (b) For samples with D_es of up to ～400 Gy, the D_es determined by the SGC are in agreement with the D_es by the SAR protocol, suggesting that the SGC approach could be used for D_e determination up to a dose of ～400 Gy for lacustrine samples from the Qaidam Basin of the Qinghai-Tibetan Plateau in China; (c) The saturation dose for these samples is more than 600 Gy, and in the growth curve a linear growth part was observed in the high dose range of >200 Gy.     

OSL and IRSL dating of raised beach sand deposits along the southeastern coast of Norway

Raised beach sand deposits along the southeastern coast of Norway were dated by optical (OSL) and infrared stimulated luminescence (IRSL) and the quartz and K-feldspar luminescence characteristics were described. Due to the poor quartz luminescence characteristics, only a limited number of samples were suitable for OSL dating. More promising are the K-feldspar extracts, with typical K-feldspar luminescence characteristics and no sign of fading. For equivalent dose (D_e) determination, sand-size quartz and feldspar extracts were used, applying a single aliquot regenerative (SAR) protocol. Both, OSL and IRSL D_e estimates show a wide distribution, unexpected for beach deposits. The calculated OSL and IRSL age estimates were generally in good agreement and the correctness of the ages was confirmed by independent age control. Because only a limited number of the quartz samples were suitable for OSL dating, IRSL dating of the K-feldspar represents an alternative to OSL quartz dating.     

Optical dating of Chinese loess using sand-sized quartz: Establishing a time frame for Late Pleistocene climate changes in the western part of the Chinese Loess Plateau

The Chinese Loess Plateau (CLP) is of major interest to Quaternary geologists because it represents an important terrestrial archive of palaeoclimatic fluctuations. Previous multiple-aliquot luminescence dating studies of Chinese loess mainly used thermoluminescence (TL) and infrared stimulated luminescence (IRSL) signals of polymineral fine-grains; these are known to be subject to anomalous fading and thus will tend to yield age underestimations. In this paper we investigate whether the blue-light stimulated luminescence (BLSL) signals from 63 to 90 μm quartz grains extracted from three western Chinese loess sites (Zhongjiacai, Le Du and Tuxiangdao) can be used to establish a reliable chronology. The single-aliquot regenerative-dose (SAR) procedure is used for the equivalent dose (D_e) determinations and the suitability of our measurement protocol is confirmed by dose recovery tests. The influence of an IRSL signal on the quartz D_e measurements derived from BLSL has been investigated. From these results we conclude that an IRSL contamination, expressed as an IRSL/BLSL ratio, of up to 10% can be accepted before the values of D_e are significantly affected. All three sites yield stratigraphically consistent and spatially highly reproducible optical ages up to about 50–70 ka. At the Tuxiangdao site a marked hiatus in the record is identified between ∼20 and ∼30 ka; this remained undetected in previous studies and clearly highlights the importance of high-resolution optical dating in Chinese loess research. The optical ages presented in this work provide more evidence for episodic loess deposition and varying loess accumulation rates in the western part of the CLP. Our study seems to confirm the potential of optically stimulated luminescence (OSL) dating using the SAR procedure applied to the very fine sandy quartz fraction in Chinese loess back to ∼40–50 ka (∼120–150 Gy).     

Construction of a ‘global standardised growth curve’ (gSGC) for infrared stimulated luminescence dating of K-feldspar

We investigated the infrared stimulated luminescence (IRSL) and post-infrared IRSL (pIRIR) signals emitted by K-feldspars from sedimentary samples from Asia, Europe and Africa using a single-aliquot multiple elevated temperature (MET) stimulation procedure. For separate aliquots of the same sample, we show that variation among the dose response curves (DRCs), or growth curves, constructed from the regenerative dose signal (L_x), the test dose signal (T_x, an indicator of luminescence sensitivity) and the sensitivity-corrected signal (L_x/T_x) can be largely eliminated by normalising the DRCs using one of the regenerative dose signals; we call this procedure ‘regenerative-dose normalisation’ or re-normalisation. Furthermore, for the MET-pIRIR signals measured at 250 °C, we find that different samples have re-normalised DRCs that follow the same growth function, despite the samples differing significantly in terms of their geological provenance, sedimentary context, equivalent dose (D_e) and luminescence sensitivity. This common feature offers the potential to establish a ‘global standardised growth curve’ (gSGC) for different samples of K-feldspar, and thereby enable D_e values to be estimated for a large number of single aliquots by projecting the re-normalised natural signals on to the gSGC. For the 18 samples investigated in this study, we find that D_e estimates obtained from the gSGC are consistent with those obtained using full single-aliquot regenerative dose (SAR) procedures for doses of up to ∼1600 Gy. The establishment of a gSGC would greatly reduce the time required to date older samples using K-feldspar, as regenerative doses of several hundreds to a few thousands of Gy are typically delivered to each aliquot in each SAR cycle.     

Investigating the potential of HCl-only treated samples using range-finder OSL dating

Rapid sample preparation and measurement protocols for optically stimulated luminescence (OSL) dating have been investigated as a method of increasing the throughput of samples (e.g. Roberts et al. 2009). Here, we investigate the potential of dating samples treated using only hydrochloric acid (HCl) for providing accurate range-finder ages for quartz. The equivalent dose (D_e) is underestimated for older samples using a standard single-aliquot regenerative-dose (SAR) protocol, but measurement of the post-IR OSL signal (e.g. Roberts and Wintle, 2003) provides D_e estimates within 15% of the ‘target fully prepared D_e’ for two-thirds of samples. The application of a standardised growth curve (SGC) is also investigated. For these dune samples, the most efficient preparation and measurement procedure from which accurate D_e estimates can be obtained is treatment with HCl-only, measurement of the natural and regenerative post-IR OSL signal, and calculation using a region-independent SGC. A slightly longer protocol incorporating an additional preparation stage of heavy liquid density separation can be used to improve D_e estimates in samples where feldspar-contamination is thought to be particularly problematic. In practice, these time savings of days to weeks in the preparation and measurement protocols mean that a large number of samples can first be rapidly treated with HCl, the post-IR blue OSL signal measured using a shortened double-SAR protocol, and D_e calculated by applying an independent SGC before then deciding which samples require full preparation and measurement, rather than the inefficiency of committing time and resources to all samples if this is unnecessary for the context of a particular suite of samples. The potential of this rapid preparation and measurement protocol is discussed in relation to sand dune dating studies.     

Direct measurement of the fast component of quartz optically stimulated luminescence and implications for the accuracy of optical dating

The usual practice in optical dating is to derive an equivalent dose (D_e) (and hence age) from integration of the initial part of the measured optically stimulated luminescence (OSL) signal. This ‘bulk’ OSL signal is known to comprise several semi-independent components, each of which decays at different rates during measurement, and thus contributes a different proportion to the bulk signal as measurement time progresses. Data are presented here which show a strong dependence of D_e on the bulk signal integration interval, with reduced D_e for later signal integration intervals resulting from lower medium component D_e values. This dependence leads to two problems: (i) deciding which signal integral to choose, and (ii) the possibility that all bulk signals will provide systematic age underestimation due to medium component signal contributions. Isolating the fast component of the bulk OSL signal provides a solution to both problems and several methods of achieving this are assessed; an efficient new method is described which is incorporated in to standard single-aliquot regenerative-dose measurement sequences. This method involves the direct measurement of the fast-component signal using infrared (830 nm) stimulation of quartz at 160 °C, prior to the standard bulk OSL measurement with 470 nm stimulation. It is shown that the measured quartz infrared stimulated luminescence signals resolve pure fast-component signals and provide D_e estimates consistent with those from signal deconvolution. This approach can only be applied to samples with relatively bright luminescence emissions, but in these cases is expected to provide a more robust estimate of palaeodose.     

The build-up of the laboratory-generated dose-response curve and underestimation of equivalent dose for quartz OSL in the high dose region: A critical modelling study

The application of a regeneration procedure for optically stimulated luminescence (OSL) dating requires that the dose-response curve (DRC) of a natural sample is the same as that of a laboratory-generated one. However, the build-up of the laboratory-generated DRCs of quartz has been widely reported in the literature, i.e., the laboratory-generated DRCs are significantly higher than the natural counterparts in the high dose region (above 150 or 200 Gy). This results in severe underestimation of equivalent dose (D_e) for quartz OSL in the high dose region during the application of a single-aliquot regenerative-dose (SAR) protocol. However, the potential mechanism governing the build-up of the laboratory-generated DRC is still unclear. In this study, we performed a comprehensive investigation of the natural and laboratory-generated OSL signals and DRCs using a kinetic model for quartz. We compared the differences in charge concentrations between natural and laboratory-irradiated aliquots following irradiation and monitored the competition for holes and electrons during preheat and stimulation, for the natural, regenerative, and test dose cycles. In the course of the modelling, we could see the build-up of laboratory-generated DRCs, the underestimation of D_e, and a double exponential saturation characteristic of the DRCs. We demonstrated a discrepancy in competition for electrons in the deep electron trap and recombination centres during stimulation between the natural, regenerative, and test dose cycles. The simulation results are directly relevant to quartz OSL D_e determination using the SAR protocol and reveal the mechanisms responsible for the experimentally observed different behaviours between natural and laboratory-generated DRCs.     

Luminescence dating of ephemeral stream deposits around the Palaeolithic site of Ifri n'Ammar (Morocco)

The prehistoric site of Ifri n'Ammar is situated in northeastern Morocco, in the northern prolongation of the Middle Atlas Mountains. It is a key location in unravelling the history of anatomically modern humans (AMH) in northern Africa as it reveals Middle and Late Palaeolithic occupation phases since ∼170 ka. Whilst the archaeological sequence within the rock shelter has been well studied, the timing of landscape dynamics around Ifri n'Ammar is still poorly understood. This study therefore aims to establish a detailed chronology of the Wadi Selloum profile at the apron of the shelter, based on optically stimulated luminescence (OSL) dating of ephemeral stream deposits. Coarse-grain quartz was used for single-grain and multiple-grain dating procedures to investigate the luminescence properties of these deposits and to get more accurate age information concerning the phases of human occupation. Continuous wave OSL (CW-OSL) revealed a dominant fast component for all quartz samples. The dose distribution of the uppermost samples showed overdispersion values >25% and significant positive skewness. We identified partial bleaching as the main source of scatter in the equivalent dose (D_e) distribution. The lowermost sample appeared to be close to signal saturation. The shapes of the dose response curve varied widely between aliquots and coarse quartz grains exhibited therefore very different dose saturation behaviours among aliquots. With fully saturated dose response curves (DRCs), meaningful D₀ values were assumed for D_e estimation.The eight OSL samples yielded stratigraphically consistent ages ranging from 1.3 ± 0.2 ka to 76 ± 5 ka, thus reaching the Middle Palaeolithic period. Moreover, a pottery shard dated to 7.4 ± 0.6 ka (Early Neolithic period) by thermoluminescence (TL), perfectly matched the Holocene OSL samples extracted at the same depth of the profile. In summary, our results point to fluvial aggradation during OIS 5.1, the late glacial period, and the Holocene.     

Multi-method pIRIR dating of sedimentary sequences at the southern edge of the Gurbantunggut Desert,NW China and its palaeoenvironmental implications

The Gurbantunggut Desert is the second-largest desert in China, located in the westerly-dominated region of north-western China. Previous understanding of palaeoclimate of this desert was mostly based on lake and loess records from the Junggar Basin and Tian Shan Mountains, whilst direct dating of sedimentary records from the desert was very limited. This study applies high-resolution post-infrared infrared stimulated luminescence (pIRIR) dating to three sedimentary profiles at the southern edge of the Gurbantunggut Desert, which contain aeolian sand and water-lain sediments, recording palaeoenvironmental changes at the desert margin since the Last Glacial Maximum (LGM). Different pIRIR dating procedures were applied for samples with different ages. For Holocene-aged samples, a single-aliquot regenerative-dose (SAR) pIRIR procedure based on a three-stepped pIRIR measurement at 110 °C, 140 °C and 170 °C was used, and a standard growth curve (SGC) procedure yields an equivalent dose (D_e) similar to that of the full-SAR procedure; thus, is applicable for accelerating D_e measurement. For samples much older than the Holocene, a multi-aliquot regenerative-dose (MAR) pIRIR procedure based on a three-stepped pIRIR measurement at 150 °C, 200 °C and 250 °C was found to be the optimal dating procedure, because a SAR procedure would yield underestimated ages due to uncorrected initial sensitivity change. pIRIR dating results of the investigated profiles reveal a substantial sand accumulation during the LGM, an intensification of aeolian deposition at ∼12 ka and a wetter depositional environment at ∼10–8 ka. A rapid fluvial deposition is dated at ∼20–19 ka, corresponding to the deglaciation period. The sedimentary records from the desert margin show some correlation with lake and loess records in the same region and suggest a complex response of the desert environment to different climatic factors.     

Comparison of paired quartz OSL and feldspar post-IR IRSL dose distributions in poorly bleached fluvial sediments from South Africa

A comparative study using quartz optically stimulated luminescence (OSL) and feldspar post-infrared infrared stimulated luminescence (post-IR IRSL) was undertaken on Quaternary fluvial sediments from an unnamed tributary of the Moopetsi River in South Africa. The aim is to assess whether the post-IR IRSL signal can be used to date incompletely bleached sediments. Several post-IR IRSL signals using varying stimulation and preheat temperatures were investigated; of these the post-IR IRSL₂₂₅ signal was deemed most appropriate for dating because it bleached most rapidly. The feldspar post-IR IRSL₂₂₅ equivalent dose (D_e) values from this site are consistently larger than those from quartz OSL, probably due to differences in the bleaching characteristics of the two signals. Additionally, the post-IR IRSL₂₂₅ D_e values within a sample showed less variation in precision than the quartz D_e data, possibly due to greater averaging between grains in the feldspar small aliquots. The agreement between ages based on the OSL and post-IR IRSL₂₂₅ signals was better for younger samples (<20 ka) than for older ones (>50 ka); the cause of this variation is unclear.     

OSL dating of loess deposits bracketing Sheep Creek tephra beds,northwest Canada: Dim and problematic single-grain OSL characteristics and their effect on multi-grain age estimates

Geochemically-fingerprinted tephra beds provide unique chronostratigraphic markers for comparing Quaternary sedimentary records across eastern Beringia (Alaska and Yukon Territory). Establishing reliable numerical age control on these tephra horizons enables them to be placed within firm temporal frameworks and increases their potential as correlative tools for regional palaeoenvironmental reconstructions. To this end we present new single-grain and multi-grain quartz optically stimulated luminescence (OSL) chronologies for loess deposits bracketing three well-documented and regionally significant variants of the Sheep Creek tephra (SCt) at two sites in west-central Yukon Territory (Ash Bend and Quartz Creek). Single-grain OSL ages bracketing the SCt-A and SCt-K reveal that these tephras were deposited during late Marine Isotope Stage (MIS) 5 or early MIS 4. The SCt-C variant and associated organic-rich bed at Ash Bend were likely deposited during late MIS 5, based on a single-grain OSL age of ∼81 ka for the overlying sediments. The single-grain OSL ages obtained for these deposits are in stratigraphic order and in broad agreement with a fission track age estimate of ∼77 ka for the SCt-K. In contrast, comparative chronologies obtained using multi-grain aliquots are stratigraphically inconsistent and unexpectedly young when compared with the independent SCt-K age. Detailed examination of the single-grain OSL datasets reveal a range of unfavourable luminescent properties that could have contributed to the multi-grain aliquot age discrepancies; including, very low yields of luminescent grains, weak OSL signal sensitivities and large populations of aberrant grains (particularly 0 Gy grains and ‘dim’ grains with a tendency to sensitise during the equivalent dose (D_e) measurement sequence) that have similarly sized OSL signals as grains used for D_e analysis. Synthetic aliquot D_e datasets constructed from single-grain OSL measurements reveal that the large proportional light sum contributions of 0 Gy and dim grains could possibly account for multi-grain age underestimations in some of the Ash Bend samples. In light of these potentially problematic averaging effects, we do not consider the multi-grain OSL ages to be reliable and suggest that single-grain approaches may be preferable for dating sediments with similar quartz luminescence behaviours across this region.     

OSL quartz age underestimation due to unstable signal components

When measuring samples from southern Peru, we discovered an age offset between feldspar infrared-stimulated luminescence (IRSL) and quartz optically stimulated luminescence (OSL) ages. This age offset was not only found in these particular samples but was also observed in samples from a range of geographical localities. Extensive analysis revealed that it is actually the quartz age that underestimates the true depositional age, and this is due to a very weak fast component combined with other thermally unstable OSL signal components. We discuss properties of these poorly behaving samples and how to detect such samples prior to the OSL single-aliquot regenerative-dose (SAR) measurement. Finally, existing approaches to improve equivalent dose (D_e) determination are discussed for samples from southern Peru.