INFLUENCE OF SOIL MOISTURE AND VEGETATION ON CLIMATE CHANGES INDUCED BY THERMAL FORCING*

A land-process scheme has been incorporated in a vertical one-dimensional time-dependent atmospheric model and numerical experiments have been performed with the coupled model to examine influences of soil wetness and vegetation on climate changes associated to thermal forcing.It is showed that response of land-surface temperature to the thermal forcing becomes small with increase of soil water content and vegetation cover.Furthermore,the response is more obvious in arid climate region than in humid one.The result also shows that there exist two patterns of corresponding relation between variations in air temperature and humidity on the land surface in response to hydrologic and thermal focing.     

INFLUENCE OF SOIL MOISTURE AND VEGETATION ON CLIMATE CHANGES INDUCED BY THERMAL FORCING

A land-process scheme has been incorporated in a vertical one-dimensional time-dependent atmospheric modeland numerical experiments have been performed with the coupled model to examine influences of soil wetness and vege-tation on climate changes associated to thermal forcing.It is showed that response of land-surface temperature to thethermal forcing becomes small with increase of soil water content and vegetation cover.Furthermore,the response ismore obvious in arid climate region than in humid one.The result also shows that there exist two patterns of corre-sponding relation between variations in air temperature and humidity on the land surface in response to hydrologic andthermal focing.     

土壤热异常影响地表能量平衡的个例分析和数值模拟

The statistical relationship between soil thermal anomaly and short-term climate change is presented based on a typical case study. Furthermore, possible physical mechanisms behind the relationship are revealed through using an off-line land surface model with a reasonable soil thermal forcing at the bottom of the soil layer.In the first experiment, the given heat flux is 5 W m-2 at the bottom of the soil layer (in depth of 6.3 m)for 3 months, while only a positive ground temperature anomaly of 0.06℃ can be found compared to the control run. The anomaly, however, could reach 0.65℃ if the soil thermal conductivity was one order of magnitude larger. It could be even as large as 0.81℃ assuming the heat flux at bottom is 10 W m-2. Meanwhile, an increase of about 10 W m-2 was detected both for heat flux in soil and sensible heat on land surface, which is not neglectable to the short-term climate change. The results show that considerable response in land surface energy budget could be expected when the soil thermal forcing reaches a certain spatial-tem poral scale. Therefore, land surface models should not ignore the upward heat flux from the bottom of the soil layer. Moreover, integration for a longer period of time and coupled land-atmosphere model are also necessary for the better understanding of this issue.     

热力强迫对局地环流的扰动作用

用积分变换法求解了包含地面加热作用的二维不可压缩流体的Boussinesq方程组,得到一组描述地面加热作用激发的局地扰动流场的解析解,主要有垂直风、水平扰动风、扰动气压、扰动温度。进而用动力学分析的观点结合图形分析,定性讨论了热力强迫作用对局地环流的扰动作用,以及加热影响下各物理扰动场的空间分布及时间演变特征。     

A scheme for computing surface fluxes from mean flow observations

A computational scheme is developed for estimating turbulent surface stress, sensible heat flux and humidity flux from mean velocity, temperature and humidity at a single height in the atmospheric surface layer; conditions at this reference level are presumed known from observations or from a numerical atmospheric circulation model. The method is based on coupling a Monin-Obukhov similarity profile to a force-restore formulation for the evolution of surface soil temperature to yield the local values of shear stress, heat flux and surface temperature. A self-contained formulation is presented including parameterizations for solar and infrared radiant flux at the surface.In addition to reference-level mean flow properties, the parameters needed to implement the scheme are thermal heat capacity of the soil, surface aerodynamic roughness, latitude, solar declination, surface albedo, surface emissivity and atmospheric transmissivity.Sample calculations are presented for (a), constant atmospheric forcing at the reference level, and (b) variable atmospheric forcing corresponding to Kahle's (1977) measurements of windspeed, air temperature and radiometer soil surface temperature under dry vegetatively sparse conditions in the Mohave Desert in California. The latter case simulated the observed diurnal variations resonably well for the parameters used.Consultant, Atmospheric Sciences Division, Department of Energy and Environment, Brookhaven National Laboratory, Upton, N.Y., pc11973, U.S.A.     

Fronts and the boundary layer – some numerical studies

In this paper, we consider boundary-layer effects on atmospheric fronts. For this purpose we developed a dry, hydrostatic, two-dimensional numerical model with turbulence parameterized with the 1/2 -order eddy viscosity closure of Mellor and Yamada. In the surface layer we use Monin–Obukhov similarity and there is an interactive soil model to obtain lower boundary conditions for the atmospheric model. First, effects of turbulence are studied without thermal forcing at the surface and comparisons are made between inviscid and turbulent conditions. Sensitivity studies with respect to surface roughness are also performed. Subsequently we study effects of surface thermal forcing on fronts. The results show that, during summer, fronts display strong diurnal variation. Vertical velocities increase significantly during the day while gradients in temperature and vorticity across the front strengthen in the evening and at night. In winter the diurnal variation is much less pronounced. We attempt to find physical mechanisms responsible for such frontal behaviour and we compare our results with available observations.     

干旱区陆面过程模型参数优化和地气相互作用特征的模拟研究

依据干旱区陆地下垫面观测结果, 对陆面过程模式Common Land Model (CoLM) 中反照率、 粗糙度长度和土壤热力性质3个方面的参数进行了优化, 并按照不同的参数组合形式设计了为加深理解干旱区地气相互作用的控制试验和研究重要参数影响的敏感性试验, 对敦煌戈壁2000年5月～2004年7月的陆面过程进行了离线 (off-line) 数值模拟分析。控制试验结果表明: 优化参数的模式在干旱区得到了更好的模拟性能, 对地表和深层土壤温度、 净短波辐射、 净长波辐射以及感热通量的模拟能力较原模式有了明显的提高。敏感性试验的结果表明: 地表温度在全年对反照率都比较敏感, 春季和夏季更为显著; 粗糙度长度和土壤热力性质分别在春夏和秋冬对地表温度有较大影响; 感热通量对反照率和粗糙度长度在夏半年比较敏感, 而土壤热力性质对感热通量的影响并不明显。对敏感性试验的结果进一步分析发现: 原模式在计算地表温度、 净辐射和感热通量的过程中存在不同形式的误差抵消的现象, 这就会掩盖模式的模拟误差, 优化参数的模式可以更好的反映干旱区地气相互作用的物理过程。针对模式输出的感热通量和地表热通量的分析发现: 感热通量的季节变化明显, 全年都有由地表向上的感热通量输送, 夏季尤为显著; 相对于感热通量而言, 潜热通量量级很小可以忽略不计。夏季, 净辐射的能量大部分以感热通量的形式返回大气, 其余的能量以地表热通量的形式进入土壤并贮存, 夏季土壤为热汇; 冬季, 夏季贮存的能量又由土壤返回大气, 此时土壤为热源。     

土壤湿度影响中国夏季气候的数值试验

利用"全球土壤湿度计划第2阶段"提供的土壤湿度资料强迫区域气候模式RegCM3,通过数值试验讨论了土壤湿度对东亚夏季气候模拟效果的影响。结果表明,合理考虑土壤湿度的作用,能够提高区域气候模式对中国夏季降水和2 m气温的空间分布型及逐日变化的模拟效果;模拟结果与观测的相关分析显示,降水和2 m气温的年际变化都得到了有效改进,这种改进在气温上尤为明显。不过上述改进具有区域依赖性。数值试验结果表明,气温对土壤湿度的敏感性强于降水,这也从一个侧面说明提高降水模拟效果的难度。总体而言,合理的土壤湿度能够提高区域气候模式对中国夏季气候的模拟能力。因此,合理描述土壤湿度的变化,是提高中国夏季气候预报技巧的潜在途径之一。     

Elucidating Dominant Factors Affecting Land Surface Hydrological Simulations of the Community Land Model over China

In order to compare the impacts of the choice of land surface model(LSM) parameterization schemes, meteorological forcing, and land surface parameters on land surface hydrological simulations, and explore to what extent the quality can be improved, a series of experiments with different LSMs, forcing datasets, and parameter datasets concerning soil texture and land cover were conducted. Six simulations are run for the Chinese mainland on 0.1° × 0.1° grids from 1979 to 2008, and the simulated mon...     

An Improved Three-Dimensional Simulation of the Diurnally Varying Street-Canyon Flow

The impact of diurnal variations of the heat fluxes from building and ground surfaces on the fluid flow and air temperature distribution in street canyons is numerically investigated using the PArallelized Large-eddy Simulation Model (PALM). Simulations are performed for a 3 by 5 array of buildings with canyon aspect ratio of one for two clear summer days that differ in atmospheric instability. A detailed building energy model with a three-dimensional raster-type geometry—Temperature of Urban Facets Indoor-Outdoor Building Energy Simulator (TUF-IOBES)—provides urban surface heat fluxes as thermal boundary conditions for PALM. In vertical cross-sections at the centre of the spanwise canyon the mechanical forcing and the horizontal streamwise thermal forcing at roof level outweigh the thermal forces from the heated surfaces inside the canyon in defining the general flow pattern throughout the day. This results in a dominant canyon vortex with a persistent speed, centered at a constant height. Compared to neutral simulations, non-uniform heating of the urban canyon surfaces significantly modifies the pressure field and turbulence statistics in street canyons. Strong horizontal pressure gradients were detected in streamwise and spanwise canyons throughout the day, and which motivate larger turbulent velocity fluctuations in the horizontal directions rather than in the vertical direction. Canyon-averaged turbulent kinetic energy in all non-neutral simulations exhibits a diurnal cycle following the insolation on the ground in both spanwise and streamwise canyons, and it is larger when the canopy bottom surface is paved with darker materials and the ground surface temperature is higher as a result. Compared to uniformly distributed thermal forcing on urban surfaces, the present analysis shows that realistic non-uniform thermal forcing can result in complex local airflow patterns, as evident, for example, from the location of the vortices in horizontal planes in the spanwise canyon. This study shows the importance of three-dimensional simulations with detailed thermal boundary conditions to explore the heat and mass transport in an urban area.     

Spectral surface albedo over Morocco and its impact on radiative forcing of Saharan dust

In May–June 2006, airborne and ground-based solar (0.3–2.2 μm) and thermal infrared (4–42 μm) radiation measurements have been performed in Morocco within the Saharan Mineral Dust Experiment (SAMUM). Upwelling and downwelling solar irradiances have been measured using the Spectral Modular Airborne Radiation Measurement System (SMART)-Albedometer. With these data, the areal spectral surface albedo for typical surface types in southeastern Morocco was derived from airborne measurements for the first time. The results are compared to the surface albedo retrieved from collocated satellite measurements, and partly considerable deviations are observed. Using measured surface and atmospheric properties, the spectral and broad-band dust radiative forcing at top-of-atmosphere (TOA) and at the surface has been estimated. The impact of the surface albedo on the solar radiative forcing of Saharan dust is quantified. In the SAMUM case of 19 May 2006, TOA solar radiative forcing varies by 12 W m⁻² per 0.1 surface-albedo change. For the thermal infrared component, values of up to +22 W m⁻² were derived. The net (solar plus thermal infrared) TOA radiative forcing varies between −19 and +24 W m⁻² for a broad-band solar surface albedo of 0.0 and 0.32, respectively. Over the bright surface of southeastern Morocco, the Saharan dust always has a net warming effect.     

Uncertainties in the GSWP-2 precipitation forcing and their impacts on regional and global hydrological simulations

The Global Soil Wetness Project (GSWP) is an international initiative aimed at producing global data sets of soil wetness and energy and water fluxes by driving land surface models with state-of-the-art 1° by 1° atmospheric forcing and land surface parameters. It also provides a unique opportunity to develop and test land surface parameterizations at the global scale, using multi-year off-line simulations that are not affected by the systematic errors found in atmospheric models. Nevertheless, the accuracy and reliability of the 10?year GSWP-2 atmospheric forcing remain questionable. A first comparison using the high-resolution Rhône-AGGregation (Rhône-AGG) database reveals that the baseline GSWP-2 precipitation forcing is drastically overestimated over the Rhône river basin. Hydrological simulations driven with each dataset and using the ISBA land surface model and the MODCOU river routing model are also compared. The simulated river discharges are validated against a dense network of river gauges and are generally less realistic when using the GSWP-2 instead of the Rhône-AGG precipitation forcing. Secondly, the GSWP-2 precipitation forcing is compared with three alternative data sets (GPCP-2, CRU-2, CMAP) at the global scale. Moreover, the results of a global sensitivity study to the precipitation forcing conducted with six land surface models are shown. The TRIP river routing model is used to convert daily runoff from all models into river discharges, which are compared at 80 gauging stations distributed over the globe. In agreement with the regional evaluation, the results reveal that the baseline GSWP-2 precipitation forcing is generally overestimated over the mid and high latitudes, which implies systematic errors in the simulated discharges. This study reveals that the empirical wind corrections applied to the GSWP-2 precipitation forcing are exaggerated, whereas the GPCP satellite adjustments seem to be useful for simulating realistic annual mean river discharges over the East Siberian river basins.     

Interannual Variability of Late-spring Circulation and Diabatic Heating over the Tibetan Plateau Associated with Indian Ocean Forcing

The thermal forcing of the Tibetan Plateau(TP) during boreal spring,which involves surface sensible heating,latent heating released by convection and radiation flux heat,is critical for the seasonal and subseasonal variation of the East Asian summer monsoon.Distinct from the situation in March and April when the TP thermal forcing is modulated by the sea surface temperature anomaly(SSTA) in the North Atlantic,the present study shows that it is altered mainly by the SSTA in the Indian Ocean Basin Mode(IOBM) in May,according to in-situ observations over the TP and MERRA reanalysis data.In the positive phase of the IOBM,a local Hadley circulation is enhanced,with its ascending branch over the southwestern Indian Ocean and a descending one over the southeastern TP,leading to suppressed precipitation and weaker latent heat over the eastern TP.Meanwhile,stronger westerly flow and surface sensible heating emerges over much of the TP,along with slight variations in local net radiation flux due to cancellation between its components.The opposite trends occur in the negative phase of the IOBM.Moreover,the main associated physical processes can be validated by a series of sensitivity experiments based on an atmospheric general circulation model,FAMIL.Therefore,rather than influenced by the remote SSTAs of the northern Atlantic in the early spring,the thermal forcing of the TP is altered by the Indian Ocean SSTA in the late spring on an interannual timescale.     

Relationships between surface albedo,soil thermal parameters and soil moisture in the semi-arid area of Tongyu,northeastern China

Continuous observation data collected over the whole year of 2004 on a cropland surtace m Tongyu, a senti-arid area of northeastern China （44°25＇N, 122°52＇E）, have been used to investigate the variations of surface albedo and soil thermal parameters, including heat capacity, thermal conductivity and thermal diffusivity, and their relationships to soil moisture. The diurnal variation of surface albedo appears as a U shape curve on sunny days. Surface albedo decreases with the increase of solar elevation angle, and it tends to be a constant when solar elevation angle is larger than 40°. So the daily average surface albedo was computed using the data when solar elevation angle is larger than 40° Mean daily surface albedo is found to decrease with the increase of soil moisture, showing an exponential dependence on soil moisture. The variations of soil heat capacity are small during Julian days 90 300. Compared with the heat capacity, soil thermal conductivity has very gentle variations during this period, but the soil thermal diffusivity has wide variations during the same period. The soil thermal conductivity is found to increase as a power function of soil moisture. The soil thermal diffusivity increases firstly and then decreases with the increase of soil moisture.     

Direct Climatic Effect of Dust Aerosol in the NCAR Community Atmosphere Model Version 3 （CAM3）

Direct climate responses to dust shortwave and longwave radiative forcing (RF) are studied using the NCAR Community Atmosphere Model Version 3 (CAM3). The simulated RF at the top of the atmosphere (TOA) is-0.45 W m-2 in the solar spectrum and +0.09 W m-2 in the thermal spectrum on a global average. The magnitude of surface RF is larger than the TOA forcing, with global mean shortwave forcing of-1.76 W m-2 and longwave forcing of +0.31 W m-2 . As a result, dust aerosol causes the absorption of 1.1 W m-2 in t...     

THREE-DIMENSIONAL MESOSCALE MODELING OF METEOROLOGICAL FIELDS OVER ZHUJIANG(PEARL)RIVER DELTA

The CSU-RAMS-2A was used to simulate the meteorological fields over the Zhujiang River Delta in South China.Initialized from a horizontally homogeneous atmosphere,real topography and inhomogeneous surface boundary condi-tions,the model was run with thermal and terrain forcing.The modeling results of winter and summer cases are com-pared with those observed.The similarity of the predicted distributions of winds,temperatures and humidities to the ob-served patterns permits us to conclude that the mesoscale distribution of meteorological elements for the two study datesis the result of the thermal and dynamical forcing by the underlying surface and topography.     

Thermal Structure of a Coastal–Urban Boundary Layer

We use various temperature profilers located in and around New York City to observe the structure and evolution of the thermal boundary layer. The primary focus is to highlight the spatial variability of potential-temperature profiles due to heterogeneous surface forcing in an urban environment during different flow conditions. Overall, the observations during the summer period reveal the presence of thermal internal boundary layers due to the interaction between the marine atmospheric boundary layer and the convective urban environment. The summer daytime potential-temperature profiles within the city indicate a superadiabatic layer is present near the surface beneath a mildly stable layer. Large spatial variability in the near-surface (0–300 m) potential temperature is detected, with the thermal profile in the lower atmosphere uniquely determined by the underlying surface forcing and the distance from the coast. The summer and winter average night-time potential-temperature profiles show that the atmosphere is still convective near the surface. The seasonal averages of mixing ratio show large variability in the vertical direction.     

Radiative Forcing and Climate Response Due to Black Carbon in Snow and Ice

The radiative forcing and climate response due to black carbon(BC) in snow and/or ice were investigated by integrating observed effects of BC on snow/ice albedo into an atmospheric general circulation model(BCC AGCM2.0.1) developed by the National Climate Center(NCC) of the China Meteorological Administration(CMA).The results show that the global annual mean surface radiative forcing due to BC in snow/ice is +0.042 W m 2,with maximum forcing found over the Tibetan Plateau and regional mean forcing exceeding +2.8 W m 2.The global annual mean surface temperature increased 0.071 C due to BC in snow/ice.Positive surface radiative forcing was clearly shown in winter and spring and increased the surface temperature of snow/ice in the Northern Hemisphere.The surface temperatures of snow-covered areas of Eurasia and North America in winter(spring) increased by 0.83 C(0.6 C) and 0.83 C(0.46 C),respectively.Snowmelt rates also increased greatly,leading to earlier snowmelt and peak runoff times.With the rise of surface temperatures in the Arctic,more water vapor could be released into the atmosphere,allowing easier cloud formation,which could lead to higher thermal emittance in the Arctic.However,the total cloud forcing could decrease due to increasing cloud cover,which will offset some of the positive feedback mechanism of the clouds.     

Response of the Asian summer Monsoons to a high-latitude thermal forcing: mechanisms and nonlinearities

This study investigates mechanisms and nonlinearities in the response of the Asian Summer Monsoons (ASM) to high-latitude thermal forcings of different amplitudes. Using a suite of runs carried out with an intermediate-complexity atmospheric general circulation model, we find that the imposed forcings produce a strong precipitation response over the eastern ASM but a rather weak response over the southern ASM. The forcing also causes a precipitation dipole with wet conditions over the eastern Tibetan Plateau (TP) and dry conditions over the Bay of Bengal (BoB) and southeast Asia. A moderate increase of precipitation along the southern margin of the TP is also produced. Simulations designed to isolate the causal mechanisms show that thermodynamic interactions involving the tropical surface oceans are far less important than the water-vapour feedback for the transmission of information from the high-latitudes to the ASM. Additionally, we assess the nonlinearity of the ASM precipitation response to the forcing amplitude using a novel application of the empirical orthogonal function method. The response can be decomposed in two overlapping patterns. The first pattern represents a precipitation dipole with wet conditions over the eastern TP and dry conditions over BoB, which linearly increases with forcing amplitude becoming quasi-stationary for large forcing amplitudes (i.e. amplitudes leading to Arctic temperature anomalies larger than 10 °C). The second pattern is associated with increased precipitation over the southeastern TP and is nonlinearly dependent on forcing, being most important for intermediate forcing amplitudes (i.e. amplitudes leading to Arctic temperature anomalies between 5 and 10 °C).     

A land data assimilation system using the MODIS-derived land data and its application to numerical weather prediction in East Asia

Land Data Assimilation Systems have been developed to generate the surface initial conditions such as soil moisture and temperature for better prediction of weather and climate. We have constructed Korea Land Data Assimilation System (KLDAS) based on an uncoupled land surface modeling framework that integrates high-resolution in-situ observation, satellite data, land surface information from the WRF Preprocessing System (WPS) and the MODIS land products over the East Asia. To present better surface conditions, the KLDAS is driven by atmospheric forcing data from the in-situ rainfall gauges and satellite. In this study, we 1) briefly introduce the KLDAS, 2) evaluate the meteorological states near the surface and the surface fluxes reproduced by the KLDAS against the in-situ observation, and then 3) examine the performance of the mesoscale model initialized by the KLDAS. We have generated a 5-year, 10 km, hourly atmospheric forcing dataset for use in KLDAS operating across East Asia. The KLDAS has effectively reproduced the observed patterns of soil moisture, soil temperature, and surface fluxes. Further scrutiny reveals that the numerical simulations incorporating the KLDAS outputs show better agreement in both the simulated near-surface conditions and rainfall distribution over the Korean Peninsula, compared to those without the KLDAS.