首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 62 毫秒
1.
闽南-台湾浅滩渔场蓝圆鲹和鲐鱼群聚空间分布的研究   总被引:1,自引:0,他引:1  
方水美  杨圣云 《台湾海峡》2006,25(3):374-380
根据闽南-台湾浅滩渔场灯光围网信息船1990~2002年的渔捞记录,研究该渔场蓝圆鲹和鲐鱼群聚空间分布.结果表明,中上层鱼类蓝圆鲹和鲐鱼年间数量变动具有时间同步的特征,年均网次产量显著相关.蓝圆鲹与鲐鱼群聚区分布差异表现在:蓝圆鲹分布的海区水深较鲐鱼浅,蓝圆鲹和鲐鱼分布渔区的水深,春季分别为40~660m和40~70m,夏季分别为30~50m和30~60m,秋、冬季分别为30~60m和40~60m;鲐鱼的群聚区分布较偏北、偏向台湾岛西岸,蓝圆鲹的群聚区分布较偏南、偏向台湾海峡的中心区域;蓝圆鲹与鲐鱼群聚区的时空隔离、彼此取代比较明显.蓝圆鲹与鲐鱼的群聚区存在一定的重叠,与其种间对食物的竞争有关.两鱼种所出现两种适应性趋向。增加了它们在同一生境中长期共存的可能性.  相似文献   

2.
鲐鱼:鲭科、鲐属。为远洋暖水性、上层深海鱼类。体粗壮微扁,呈纺锤型。一般体长20~40厘米、头圆锥形,眼大、眼脸发达,口大、上颌与下颌等长,体披细小圆鳞。背为青黑色,有不规则的深蓝色的斑纹、腹部白微带黄色。鲐鱼,我国湖海均有生产,以东海产量为多。大小黄鱼、墨鱼、带鱼资源锐减以后,鲐鱼已成为我国近海主要经济鱼类之一。鲐鱼的营养价值很高,每百克鱼肉含蛋白质21.4克、粗脂肪5.5~7.8毫克,均高于大黄鱼、带鱼、鲳鱼的含量,并含钙9.4毫克、磷173.8毫克,铁5.6毫克,是一种高蛋白、低脂肪,易被人体吸收的食物。据有关资料介绍,鲐鱼体内还含有两种营养价值极高的物质:一种叫二十碳五稀酸  相似文献   

3.
雪菜鲐鱼方便食品的研制   总被引:2,自引:0,他引:2  
研究开发了一种具有地方特色的方便食品——雪菜鲐鱼。对鲐鱼片采用去皮 ,复合盐液漂洗、压榨、雪菜汁浸渍等工序连续脱脂。研究的主要工艺参数确定如下 :复合漂洗液中Na HCO3 的最佳质量浓度为 2 0 kg/m3 ;用波美度为 6 .0的雪菜汁浸渍的时间是 1 h;调味鱼片在 40℃下干燥的时间为 5 .5 h;雪菜淡化时 ,雪菜用量 (kg)∶水体积 (L) =1∶ 4,淡化时间为 1 h;雪菜干燥的温度为 5 0℃ ,时间为 4h  相似文献   

4.
浙江近海秋汛上层鱼资源初步评析   总被引:3,自引:0,他引:3  
本文采用Jones(1981)体长股分析法和剩余产量模型对北纬28°30′—31°30′,东经124°30′以西海域7—10月的秋季上层鱼资源状况进行了评析。本海域上层鱼资源以鲐鱼数量居首位,其次为蓝圆鲹。上层鱼资源约144万担,可提供持续产量70—80万担,最佳捕捞力量为211组左右。  相似文献   

5.
以海洋生态系营养动力学为基础 ,采用Steele模式估算闽南 台湾浅滩渔场中上层鱼类资源年生产量为 86 4.6 3kt,进而以鲐鱼参鱼类群聚资源在中上层鱼类资源的比例 ,估算鲐鱼参鱼类群聚资源的年生产量为 5 1 9.5 6kt。Gulland和MSY简单模式估算鲐鱼参鱼类群聚资源的最大持续产量分别为 2 5 0 .5 7kt和 2 5 9.78kt。Schae fer和Fox剩余产量模式估算鲐鱼参鱼类群聚资源的最大持续产量分别 2 36 .0kt和2 34.1kt,最大持续捕捞力量分别为 1 1 40 4.1和 1 2 6 6 6 .6MW·d ,折算为福建灯光围网渔船分别为 42 4和 471组 ,并从开发现状和种群生态学及捕捞死亡等参数分析鲐鱼参鱼类群聚资源的开发前景。  相似文献   

6.
基于个体模型的东海鲐鱼渔场形成机制研究   总被引:4,自引:2,他引:2  
鲐鱼Scomber japonicus资源丰富,在我国近海渔业中占有重要地位。其渔场的形成受海洋环境的制约,本文确定鲐鱼运动和物理环境之间的响应关系,建立起了基于个体的东海鲐鱼生长洄游模型。结果显示,鲐鱼集群分布与捕捞生产渔场基本吻合,鲐鱼聚集主要受台湾暖流、大陆沿岸水、黑潮影响,往往集群在一定温度范围内并在冷暖交汇区温盐梯度大偏暖水一侧。在台湾暖流和沿岸水交汇的锋面附近、台湾暖流暖水舌前端、黑潮与中国大陆沿岸水形成的潮境区域均有大量的鲐鱼聚集,并形成渔场。产卵位置的变动使偏西产卵位置的鲐鱼由于受台湾暖流影响较大,鲐鱼会呈长带状大量聚集在台湾暖流和沿岸水的锋面附近,并使在台湾暖流暖水舌前端的聚集数量增多,而偏东的产卵的鲐鱼受黑潮影响较大,聚集分布范围较大,会使黑潮形成的锋面附近聚集数量增多,而使台湾暖水舌的前端的聚集量减少。正常产卵位置在生存率方面是最佳产卵位置。研究表明鲐鱼所处空间位置不同,会影响其集群的位置,用数值模型验证了物理环境会对鲐鱼的洄游和渔场的形成产生影响。  相似文献   

7.
基于个体的东海鲐鱼补充量年际变动模拟研究   总被引:1,自引:1,他引:0  
东海鲐鱼(Scomber japonicus)是我国近海重要经济鱼种,年际资源量波动较大,物理环境对其资源量的丰歉影响很大。本文运用基于个体的东海鲐鱼生长初期生态模型,模拟1978-2013年东海鲐鱼资源补充量。模拟发现,物理环境的变化确实能导致东海鲐鱼资源补充量的年际差异,并且在90年代后出现了较大的波动,资源补充量最多的2002年(1.8×109尾)与最少的1996年(6.5×108尾)相差1.15×109尾。产卵后的15~30 d,即4月份鱼卵仔鱼所处的海洋物理环境对东海鲐鱼最终的资源补充量起到重要作用,4月底鱼卵仔鱼的存活量基本上决定了东海鲐鱼最终的资源补充量的多寡。4月份的水温是影响鲐鱼资源补充量的物理因素之一,4月份水温高有利于提高鲐鱼的资源补充量,相反,水温偏低不利于鲐鱼的资源补充量。4月份的台湾暖流的流速也是影响鲐鱼资源补充量的另外一个物理因素,4月份台湾暖流的势力强对东海鲐鱼最终资源补充量是有利的,相反,流速小对补充量较不利。4月份台湾暖流的水温、流速决定最终东海鲐鱼资源补充量。  相似文献   

8.
鲐鱼个体生殖力研究   总被引:3,自引:0,他引:3       下载免费PDF全文
刘松  顾晨曦  严正 《海洋科学》1988,12(5):43-48
本文研究探讨了石岛渔场流刺网渔获的鲐鱼生殖群体的个体生殖力,得纠结果:1.计数样品范围内鲐鱼个体绝对生殖力平均值为531600粒;2.鲐鱼个体相对生殖力R/L平均值为1539粒/mm,R/w平均值为1078粒/g;3.雄鱼性成熟早于雌鱼,雌鱼寿命高于雄鱼;4.用复相关关系的拟合方程关系式求得的个体绝对生殖力的理论数值与实测值的相对误差仅为0.1。  相似文献   

9.
东海北部鲐鲹鱼渔场水文特征的统计学研究   总被引:6,自引:2,他引:6       下载免费PDF全文
东海北部是鲐鱼主要渔场之一 ,研究其水文及其变化特征对于掌握鲐鱼中心渔场的时空变化规律、指导渔业生产、合理利用海洋渔业资源具有重要意义。根据 1 987— 2 0 0 1年在 2 9°— 32°N、1 2 4 5°E以西海域的海洋环境调查资料和鲐鱼渔场资料 ,在GIS平台上 ,用最优隶属模型划分水团 ,并研究渔场的水团和温、盐跃层特性及其月、年变化之间的相关性 ,用于渔情预报。研究表明 ,用最优隶属模糊聚类方法划分该海域水团的结果与以往的研究结果比较一致 ;鲐鱼渔情与该区域水团第一强度、第二强度之间显示了一定的相关性 ;用稳健统计学方法 ,可确定中心渔场的底层、鱼类栖息水层的温盐范围及其聚类中心值 ;鲐鱼渔情、渔场与水文跃层的关系密切。  相似文献   

10.
海洋净初级生产力影响了浮游动植物的空间分布和丰度,因此决定了海洋渔业的潜在产量。本文根据2006-2015年7-9月中国远洋渔业数据中心提供的中国近海鲐鱼捕捞数据和海洋净初级生产力遥感数据,以单位捕捞努力量渔获量(CPUE)表征资源丰度,以经度和纬度重心表征空间分布,分析研究了鲐鱼资源丰度和空间分布与海洋净初级生产力的关系。研究结果表明,2006-2015年鲐鱼产量、CPUE、经度和纬度重心呈现明显的月份和年际变化,7-9月渔场内净初级生产力空间分布模式不同。频率分布结果表明7-9月鲐鱼对应的适宜净初级生产力浓度范围分别为300~500 mg/(m2·d)(以碳计,下同),300~400 mg/(m2·d),300~400 mg/(m2·d)。相关分析结果表明,鲐鱼资源丰度与适宜净初级生产力海域范围比例呈显著正相关,且鲐鱼纬度重心与适宜净初级生产力海域平均纬度呈显著正相关关系,这表明渔场内的净初级生产力大小和分布模式显著影响鲐鱼的资源丰度和渔场重心位置。在鲐鱼主要分布海域25°~30°N,120°~130°E范围内,鲐鱼资源丰度与净初级生产力大小呈显著负相关关系。此外,不同气候条件下鲐鱼渔场净初级生产力大小变化不同,2007年和2010年强拉尼娜年份以及2009年中强厄尔尼诺年份鲐鱼渔场范围海洋净初级生产力降低,但适宜的海洋净初级生产力范围增大,导致鲐鱼资源丰度上升;而2015年超强厄尔尼诺年份鲐鱼渔场范围内海洋净初级生产力上升,但适宜的海洋净初级生产力范围显著减小,因此鲐鱼资源丰度相对降低。研究表明,中国近海鲐鱼资源时空分布与海洋净初级生产力具有显著关联。  相似文献   

11.
In order to assess the impact of deep-sea mining on the in situ benthic life, we measured the microbial standing stock and concentration of organic nutrients in the deep-sea sediments of the Central Indian Ocean Basin in the Indian pioneer area. Sediments were collected using box core and grab samples during September 1996. The total bacterial numbers ranged from 10 10 -10 11 cells per g -1 dry weight sediment. There was a marginal decrease in the number of bacteria from surface to 30 cm depth, though the subsurface section registered a higher number than did the surface. The highest numbers were encountered at depths of 4-8 cm. The retrievable number of bacteria were two orders less in comparison with the direct total counts of bacteria. An almost homogeneous distribution of bacteria, total organic carbon, living biomass, and lipids throughout the depth of cores indicates active microbial and benthic processes in the deep sea sediments. On the other hand, a uniform distribution of total counts of bacteria, carbohydrates, and total organic carbon in all the cores indicates their stable nature and suggests that they can serve as useful parameters for long-term monitoring of the area after the benthic disturbance. Further studies on temporal variability in this region would not only verify the observed norms of distribution of these variables but would also help to understand restabilization processes after the simulated benthic disturbance.  相似文献   

12.
This article reviews information recently available from existing marine and coastal mining for responses to environmental issues affecting marine mining at different depths. It is particularly but not exclusively concerned with those issues affecting seabed biodiversity impact and recovery. Much information has been gathered in the past 10 years from shallow mining operations for construction aggregate, diamonds, and gold, from coastal mines discharging tailings to shallow and deep water, and from experimental deep mining tests. The responses to issues identified are summarized in a series of eight tables intended to facilitate site-specific consideration. Since impacts can spread widely in the surface mixing layer SML, and can affect the biologically productive euphotic zone, the main issues considered arise from the depth of mining relative to the SML of the sea. Where mining is below the SML, the issue is whether it is environmentally better to bring the extraction products to the surface vessel for processing (and waste discharge), or to process the extraction products as much as possible on the seabed. Responses to the issues need to be sitespecific, and dependent on adequate preoperational environmental impact and recovery prediction. For deep tailings disposal from a surface vessel, there are four important environmental unknowns: (1) the possible growth of "marine snow" (bacterial flocs) utilizing the enormous quantities of fine tailings particles (hundreds or thousands of metric tons per day) as nuclei for growth, (2) the possibility that local keystone plankton and nekton species may migrate diurnally down to and beyond the depth of deep discharge and hence be subjected to tailings impact at depth, (3) the burrow-up capability of deep benthos and their ability to survive high rates of tailings deposition, and (4) the pattern and rate of dispersion of a tailings density current through the deep water column from discharge point to seabed. Actions to obtain relevant information in general and site-specifically are suggested.  相似文献   

13.
Particle fluxes were measured 7 m above the sea bottom during the predisturbance, disturbance, and postdisturbance periods by using time series sediment traps attached to seven deep-sea moorings deployed in the INDEX experiment site in the Central Indian Basin. The predisturbance particle fluxes varied between 22.3 to 55.1 mg m -2 day -1 . Increased and variable particle fluxes were recorded by the sediment traps during the disturbance period. The increase observed was 0.5 to 4 times more than the background predisturbance fluxes. The increases in particle fluxes (~4 times) recorded by the sediment trap located in the southwestern direction (DMS-1) were the greatest, which could be the result of preferential movement of resuspended particles generated during the deep-sea benthic disturbance along the general current direction prevailing in this area during the experimental period. Also, the traps located closer to the disturbance area recorded greater fluxes than did the traps far away, across the Deep Sea Sediment Resuspension System path. This variability in recorded particle fluxes by the traps around the disturbance area clearly indicates that physical characteristics such as grain size and density of the resuspended particles produced during the disturbance had an important effect on particle movement. The postdisturbance measurements during ~5 days showed a reduction in particle fluxes of ~50%, indicating rapid particle settlement.  相似文献   

14.
The interdependence between the seismo-acoustic properties of a marine sediment and its geotechnical/physical parameters has been known for many years, and it has been postulated that this should allow the extraction of geotechnical information from seismic data. Though in the literature many correlations have been published for the surficial layer, there is a lack of information for greater sediment depths. In this article, a desktop study on a synthetic seafloor model illustrates how the application of published near-surface prediction equations to subsurface sediments (up to several tens of meters burial depth) can lead to spurious predictions. To test this further, acoustic and geotechnical properties were measured on a number of sediment core samples, some of which were subjected to loading in acoustically-equipped consolidation cells (oedometers) to simulate greater burial depth conditions. For low effective pressures (representing small burial depths extending to around 10 meters subsurface), the general applicability of established relationships was confirmed: the prediction of porosity, bulk density, and mean grain size from acoustic velocity and impedance appears generally possible for the investigated sedimentary environments. As effective pressure increases through, the observed relationships deviate more and more from the established ones for the near-surface area. For the samples tested in this study, in some instances increasing pressure even resulted in decreasing velocities. There are several possible explanations for this abnormal behavior, including the presence of gas, overconsolidation, or bimodal grain size distribution. The results indicate that an appropriate depth correction must be introduced into the published prediction equations in order to obtain reliable estimates of physical sediment properties for greater subsurface depths.  相似文献   

15.
An acoustic inversion method using a wide-band signal and two near field receivers is proposed and applied to multiple layered seabed models including a manganese sediment. The inversion problem can be formulated into a probabilistic model comprised of signals, a forward model, and additive noise. The forward model simulates wide-band signals, such as chirp signals, and is chosen to be the source-waveletconvolution plane wave modeling method. The wavelet matching technique, using weighted least-squares fitting, estimates the sediment sound-speed and thickness on which determination of the possible numerical ranges for a priori uniform distribution is based. The genetic algorithm is applied to a global optimization problem to find a maximum a posteriori solution for determined a priori search space. Here the object function is defined by an L 2 norm of the difference between measured and modeled signals. Not only the marginal pdf but also its statistics are calculated by numerical evaluation of integrals using the samples selected during importance sampling process of the genetic algorithm.  相似文献   

16.
海上大直径钢管桩打桩过程中,桩周土体受到强烈扰动而发生强度弱化,掌握桩周土体强度弱化规律对于准确预测打桩过程、保证工程安全具有重要意义。为研究土体强度弱化规律,开展了环剪试验模拟打桩对桩周土体的扰动,测试土体强度随剪切速率的变化规律,建立了描述土体强度弱化规律的拟合公式,引入到打桩分析软件中。研究结果表明:土体的强度折减程度不仅与土体本身的性质有关还受到土体的埋深和剪切速率的影响,埋深越深土体强度折减程度越低,剪切速率越高土体强度折减越高,在打桩分析中可采用这里推荐的线性折减方法来模拟不同深度处土体强度的折减规律。  相似文献   

17.
The advanced piston corer (APC) has been used by the Ocean Drilling Program since 1985 for recovering soft sediments from the ocean floor. The pullout force measured on extracting the core barrel from the sediment is shown to correlate with the average shear strength of the sediment core measured in the ship's laboratory. A simple rule of thumb is derived relating the shear strength of the sediment to the pullout force. Multiple APC holes at individual sites allow the consistency of the pullout measurements to be assessed. The effects of different operational procedures during APC coring are also explored. Although generally applicable, the correlation between pullout force and laboratory measurements of shear strength breaks down for some APC holes, possibly because of the disturbance of some sediment types during the APC coring process. A better understanding of the physical process of APC coring, and its effect on the properties of the sediment both inside and immediately outside the core barrel, would indicate what confidence can be put on the measurement of pullout force as a way of evaluating the in situ shear strength of deep sea sediments.  相似文献   

18.
Specific properties of the interannual sea level variations and annual tides in the Northwestern Pacific were studied. Several tide stations were monitored. The monthly mean sea level for the year of 1995 was analyzed at each tide station. A seismic event in 1995, some tectonic activity around the subject area, and the Kuroshio (the oceanic western boundary current) may possibly contaminate results which would have occurred from the astronomical annual tide alone.  相似文献   

19.
20.
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号