Distributed snow accumulation and ablation modeling in the American River basin

A spatially distributed snow model procedure for estimating snow melt, snow water equivalent and snow cover area is formulated and tested with data from the American River basin in California’s Sierra Nevada. An adaptation of the operational National Weather Service snow accumulation and ablation model is used for each model grid cell forced by spatially distributed precipitation and temperature data. The model was implemented with 6-hourly time steps on 1 km² grid cells for the snow season of 1999–2003. Temperature is spatially interpolated using the prevailing lapse rate and digital terrain elevation data. Precipitation is spatially interpolated using regional climatological analyses obtained from PRISM. Parameters that control snow melt are distributed using ground surface aspect. The model simulations are compared with data from 12 snow-sensors located in the basin and the daily 500-m snow cover extent product from the MODIS/Terra satellite mission. The results show that the distribution of snow pack over the area is generally captured. The snow pack quantity compared to snow gauges is well estimated in high elevations with increasing uncertainty in the snow pack at lower elevations. Sensitivity and uncertainty analyses indicate that the significant input uncertainty for precipitation and temperature is primarily responsible for model errors in lower elevations and near the snow line. The model is suitable for producing spatially resolved realistic snow pack simulations when forced with operationally available observed or predicted data.     

Developing machine learning-based snow depletion curves and analysing their sensitivity over complex mountainous areas

A snow depletion curve (SDC), the relationship between snow mass (e.g., snow depth [SD]) and fractional snow cover area (SCF), is essential to parameterize the effect of snowpack within a physically based snow model. Existing SDCs are constructed using traditional statistic methods may not be applicable in complex mountainous areas. In this study, we developed an information fusion framework to define the relationship between SCF and SD as well as 12 auxiliary factors by using a traditional statistical method and four prevailing machine learning (ML) algorithms, which have comprehensively considered the variable conditions that cause spatiotemporal heterogeneity of snow cover. We also performed a single-dimensional sensitivity analysis to investigate the physical rationality of the newly developed SDCs. The Northern Xinjiang, Northwest China, is selected as the study area, and the data from 46 meteorological stations covering five snow seasons from 2010 to 2015 are used. The results illustrated that ML techniques can be used to establish high-accuracy and robust SDCs for complex mountainous areas. Compared with SDCs constructed by traditional statistical, the performance of the four ML-based SDCs is significantly improved, the RMSE values can be reduced by 50%, R² above 0.75, and an average relative variance close to 0. ML-based SDCs predicted SCF values showed a range of sensitivities to different input variables (e.g., Land surface temperature, aspect, longwave radiation and land cover type), in addition to SD, that were physically representative of effects that snow cover is sensitive to. Moreover, the complexity of SDCs can be reduced by removing insensitive input variables.     

Modelling runoff using optical satellite remote sensing data in a high mountainous alpine catchment of Italy

Development of hydrological models for seasonal and real-time runoff forecast in rivers of high alpine catchments is useful for management of water resources. The conceptual models for this purpose are based on a temperature index and/or energy budget and can be either lumped or distributed over the catchment area. Remote sensing satellite data are most useful to acquire near real-time geophysical parameters in order to input to the distributed forecasting models. In the present study, integration of optical satellite remote sensing-derived information was made with ground meteorological and hydrological data, and predetermined catchment morphological parameters, to study the feasibility of application of a distributed temperature index snowmelt runoff model to one of the high mountainous catchments in the Italian Alps, known as Cordevole River Basin. Five sets of Landsat Multispectral Scanning System (MSS) and Thematic Mapper (TM) computer-compatible tapes (CCTs) were processed using digital image processing techniques in order to evaluate the snow cover variation quantitatively. Digital elevation model, slope and aspect parameters were developed and used during satellite data processing. The satellite scenes were classified as snow, snow under transition and snow free areas. A second-order polynomial fit has been attempted to approximate the snow depletion and to estimate daily snow cover areal extent for three elevation zones of the catchment separately. Model performance evaluation based on correlation coefficient, Nash–Sutcliffe coefficient and percentage volume deviation indicated very good simulation between measured and computed discharges for the entire snowmelt period. The use of average temperature values computed from the maximum and minimum temperatures into the model was studied and a suitable algorithm was proposed. © 1997 John Wiley & Sons, Ltd.     

Automatic mapping of snow cover depletion curves using optical remote sensing data under conditions of frequent cloud cover and temporary snow

Snow cover depletion curves are required for several water management applications of snow hydrology and are often difficult to obtain automatically using optical remote sensing data owing to both frequent cloud cover and temporary snow cover. This study develops a methodology to produce accurate snow cover depletion curves automatically using high temporal resolution optical remote sensing data (e.g. Terra Moderate Resolution Imaging Spectroradiometer (MODIS), Aqua MODIS or National Oceanic and Atmospheric Administration (NOAA) Advanced Very High Resolution Radiometer (AVHRR)) by snow cover change trajectory analysis. The method consists of four major steps. The first is to reclassify both cloud‐obscured land and snow into more distinct subclasses and to determine their snow cover status (seasonal snow cover or not) based on the snow cover change trajectories over the whole snowmelt season. The second step is to derive rules based on the analysis of snow cover change trajectories. These rules are subsequently used to determine for a given date, the snow cover status of a pixel based on snow cover maps from the beginning of the snowmelt season to that given date. The third step is to apply a decision‐tree‐like processing flow based on these rules to determine the snow cover status of a pixel for a given date and to create daily seasonal snow cover maps. The final step is to produce snow cover depletion curves using these maps. A case study using this method based on Terra MODIS snow cover map products (MOD10A1) was conducted in the lower and middle reaches of the Kaidu River Watershed (19 000 km²) in the Chinese Tien Shan, Xinjiang Uygur Autonomous Region, China. High resolution remote sensing data (charge coupled device (CCD) camera data with 19·5 m resolution of the China and Brazil Environmental and Resources Satellite (CBERS) data (19·5 m resolution), and the Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) data with 15 m resolution of the Terra) were used to validate the results. The study shows that the seasonal snow cover classification was consistent with that determined using a high spatial resolution dataset, with an accuracy of 87–91%. The snow cover depletion curves clearly reflected the impact of the variation of temperature and the appearance of temporary snow cover on seasonal snow cover. The findings from this case study suggest that the approach is successful in generating accurate snow cover depletion curves automatically under conditions of frequent cloud cover and temporary snow cover using high temporal resolution optical remote sensing data. Copyright © 2007 John Wiley & Sons, Ltd.     

Assimilating remotely sensed snow observations into a macroscale hydrology model

Accurate forecasting of snow properties is important for effective water resources management, especially in mountainous areas like the western United States. Current model-based forecasting approaches are limited by model biases and input data uncertainties. Remote sensing offers an opportunity for observation of snow properties, like areal extent and water equivalent, over larger areas. Data assimilation provides a framework for optimally merging information from remotely sensed observations and hydrologic model predictions. An ensemble Kalman filter (EnKF) was used to assimilate remotely sensed snow observations into the variable infiltration capacity (VIC) macroscale hydrologic model over the Snake River basin. The snow cover extent (SCE) product from the moderate resolution imaging spectroradiometer (MODIS) flown on the NASA Terra satellite was used to update VIC snow water equivalent (SWE), for a period of four consecutive winters (1999–2003). A simple snow depletion curve model was used for the necessary SWE–SCE inversion. The results showed that the EnKF is an effective and operationally feasible solution; the filter successfully updated model SCE predictions to better agree with the MODIS observations and ground surface measurements. Comparisons of the VIC SWE estimates following updating with surface SWE observations (from the NRCS SNOTEL network) indicated that the filter performance was a modest improvement over the open-loop (un-updated) simulations. This improvement was more evident for lower to middle elevations, and during snowmelt, while during accumulation the filter and open-loop estimates were very close on average. Subsequently, a preliminary assessment of the potential for assimilating the SWE product from the advanced microwave scanning radiometer (AMSR-E, flown on board the NASA Aqua satellite) was conducted. The results were not encouraging, and appeared to reflect large errors in the AMSR-E SWE product, which were also apparent in comparisons with SNOTEL data.     

Evaluation of snow products over the Tibetan Plateau

Four satellite‐based snow products are evaluated over the Tibetan Plateau for the 2007–2010 snow seasons. The Moderate Resolution Imaging Spectroradiometer (MODIS) Terra and Aqua snow cover daily L3 Global 500‐m grid products (MOD10A1 and MYD10A1), the National Oceanic and Atmospheric Administration Interactive Multisensor Snow and Ice Mapping System (IMS) daily Northern Hemisphere snow cover product and the Advanced Microwave Scanning Radiometer – Earth Observing System Daily Snow Water Equivalent were validated against Thematic Mapper (TM) snow cover maps of Landsat‐5 and meteorological station snow depth observations. The overall accuracy of MOD10A1, MYD10A1 and IMS is higher than 91% against stations observations and than 79% against Landsat TM images. In general, the daily MODIS snow cover products show better performance than the multisensor IMS product. However, the IMS snow cover product is suitable for larger scale (~4km) analysis and applications, with the advantage over MODIS to allow for mitigation for cloud cover. The accuracy of the three products decreases with decreasing snow depth. Overestimation errors are most common over forested regions; the IMS and Advanced Microwave Scanning Radiometer – Earth Observing System Snow Water Equivalent products also show poorer performance that the MODIS products over grassland. By identifying weaknesses in the satellite products, this study provides a focus for the improvement of snow products over the Tibetan plateau. The quantitative evaluation of the products proposed here can also be used to assess their relative weight in data assimilation, against other data sources, such as modelling and in situ measurement networks. Copyright © 2015 John Wiley & Sons, Ltd.     

Observations of late winter Canadian tundra snow cover properties

Tundra snow cover is important to monitor as it influences local, regional, and global‐scale surface water balance, energy fluxes, as well as ecosystem and permafrost dynamics. Observations are already showing a decrease in spring snow cover duration at high latitudes, but the impact of changing winter season temperature and precipitation on variables such as snow water equivalent (SWE) is less clear. A multi‐year project was initiated in 2004 with the objective to quantify tundra snow cover properties over multiple years at a scale appropriate for comparison with satellite passive microwave remote sensing data and regional climate and hydrological models. Data collected over seven late winter field campaigns (2004 to 2010) show the patterns of snow depth and SWE are strongly influenced by terrain characteristics. Despite the spatial heterogeneity of snow cover, several inter‐annual consistencies were identified. A regional average density of 0.293 g/cm³ was derived and shown to have little difference with individual site densities when deriving SWE from snow depth measurements. The inter‐annual patterns of SWE show that despite variability in meteorological forcing, there were many consistent ratios between the SWE on flat tundra and the SWE on lakes, plateaus, and slopes. A summary of representative inter‐annual snow stratigraphy from different terrain categories is also presented. © 2013 Her Majesty the Queen in Right of Canada. Hydrological Processes. © 2013 John Wiley & Sons, Ltd.     

Evaluation of snow models in terrestrial biosphere models using ground observation and satellite data: impact on terrestrial ecosystem processes

Snow is important for water management, and an important component of the terrestrial biosphere and climate system. In this study, the snow models included in the Biome‐BGC and Terrestrial Observation and Prediction System (TOPS) terrestrial biosphere models are compared against ground and satellite observations over the Columbia River Basin in the US and Canada and the impacts of differences in snow models on simulated terrestrial ecosystem processes are analysed. First, a point‐based comparison of ground observations against model and satellite estimates of snow dynamics are conducted. Next, model and satellite snow estimates for the entire Columbia River Basin are compared. Then, using two different TOPS simulations, the default TOPS model (TOPS with TOPS snow model) and the TOPS model with the Biome‐BGC snow model, the impacts of snow model selection on runoff and gross primary production (GPP) are investigated. TOPS snow model predictions were consistent with ground and satellite estimates of seasonal and interannual variations in snow cover, snow water equivalent, and snow season length; however, in the Biome‐BGC snow model, the snow pack melted too early, leading to extensive underpredictions of snow season length and snow covered area. These biases led to earlier simulated peak runoff and reductions in summer GPP, underscoring the need for accurate snow models within terrestrial ecosystem models. Copyright © 2007 John Wiley & Sons, Ltd.     

Improvement of snow depth retrieval for FY3B-MWRI in China

The primary objective of this work is to develop an operational snow depth retrieval algorithm for the FengYun3B Microwave Radiation Imager(FY3B-MWRI)in China.Based on 7-year(2002–2009)observations of brightness temperature by the Advanced Microwave Scanning Radiometer-EOS(AMSR-E)and snow depth from Chinese meteorological stations,we develop a semi-empirical snow depth retrieval algorithm.When its land cover fraction is larger than 85%,we regard a pixel as pure at the satellite passive microwave remote-sensing scale.A 1-km resolution land use/land cover(LULC)map from the Data Center for Resources and Environmental Sciences,Chinese Academy of Sciences,is used to determine fractions of four main land cover types(grass,farmland,bare soil,and forest).Land cover sensitivity snow depth retrieval algorithms are initially developed using AMSR-E brightness temperature data.Each grid-cell snow depth was estimated as the sum of snow depths from each land cover algorithm weighted by percentages of land cover types within each grid cell.Through evaluation of this algorithm using station measurements from 2006,the root mean square error(RMSE)of snow depth retrieval is about 5.6 cm.In forest regions,snow depth is underestimated relative to ground observation,because stem volume and canopy closure are ignored in current algorithms.In addition,comparison between snow cover derived from AMSR-E and FY3B-MWRI with Moderate-resolution Imaging Spectroradiometer(MODIS)snow cover products(MYD10C1)in January 2010 showed that algorithm accuracy in snow cover monitoring can reach 84%.Finally,we compared snow water equivalence(SWE)derived using FY3B-MWRI with AMSR-E SWE products in the Northern Hemisphere.The results show that AMSR-E overestimated SWE in China,which agrees with other validations.     

Deriving snow‐cover depletion curves for different spatial scales from remote sensing and snow telemetry data

During the melting of a snowpack, snow water equivalent (SWE) can be correlated to snow‐covered area (SCA) once snow‐free areas appear, which is when SCA begins to decrease below 100%. This amount of SWE is called the threshold SWE. Daily SWE data from snow telemetry stations were related to SCA derived from moderate‐resolution imaging spectroradiometer images to produce snow‐cover depletion curves. The snow depletion curves were created for an 80 000 km² domain across southern Wyoming and northern Colorado encompassing 54 snow telemetry stations. Eight yearly snow depletion curves were compared, and it is shown that the slope of each is a function of the amount of snow received. Snow‐cover depletion curves were also derived for all the individual stations, for which the threshold SWE could be estimated from peak SWE and the topography around each station. A station's peak SWE was much more important than the main topographic variables that included location, elevation, slope, and modelled clear sky solar radiation. The threshold SWE mostly illustrated inter‐annual consistency. Copyright © 2015 John Wiley & Sons, Ltd.     

Accuracy assessment of the MODIS snow products

A suite of Moderate‐Resolution Imaging Spectroradiometer (MODIS) snow products at various spatial and temporal resolutions from the Terra satellite has been available since February 2000. Standard products include daily and 8‐day composite 500 m resolution swath and tile products (which include fractional snow cover (FSC) and snow albedo), and 0·05° resolution products on a climate‐modelling grid (CMG) (which also include FSC). These snow products (from Collection 4 (C4) reprocessing) are mature and most have been validated to varying degrees and are available to order through the National Snow and Ice Data Center. The overall absolute accuracy of the well‐studied 500 m resolution swath (MOD10_L2) and daily tile (MOD10A1) products is ～93%, but varies by land‐cover type and snow condition. The most frequent errors are due to snow/cloud discrimination problems, however, improvements in the MODIS cloud mask, an input product, have occurred in ‘Collection 5’ reprocessing. Detection of very thin snow (<1 cm thick) can also be problematic. Validation of MOD10_L2 and MOD10A1 applies to all higher‐level products because all the higher‐level products are all created from these products. The composited products may have larger errors due, in part, to errors propagated from daily products. Recently, new products have been developed. A fractional snow cover algorithm for the 500 m resolution products was developed, and is part of the C5 daily swath and tile products; a monthly CMG snow product at 0·05° resolution and a daily 0·25° resolution CMG snow product are also now available. Similar, but not identical products are also produced from the MODIS on the Aqua satellite, launched in May 2002, but the accuracy of those products has not yet been assessed in detail. Published in 2007 by John Wiley & Sons, Ltd.     

Variability and trends in the annual snow‐cover cycle in Northern Hemisphere land areas, 1972–2000

This study investigated variability and trends in the annual snow‐cover cycle in regions covering high‐latitude and high‐elevation land areas in the Northern Hemisphere. The annual snow‐cover cycle was examined with respect to the week of the last‐observed snow cover in spring (WLS), the week of the first‐observed snow cover in autumn (WFS), and the duration of the snow‐free period (DSF). The analysis used a 29‐year time‐series (1972–2000) of weekly, visible‐band satellite observations of Northern Hemisphere snow cover from NOAA with corrections applied by D. Robinson of Rutgers University Climate Laboratory. Substantial interannual variability was observed in WLS, WFS and DSF (standard deviations of 0·8–1·1, 0·7–0·9 and 1·0–1·4 weeks, respectively), which is related directly to interannual variability in snow‐cover area in the regions and time periods of snow‐cover transition. Over the nearly three‐decade study period, WLS shifted earlier by 3–5 days/decade as determined by linear regression analysis. The observed shifts in the annual snow‐cover cycle underlie a significant trend toward a longer annual snow‐free period. The DSF increased by 5–6 days/decade over the study period, primarily as a result of earlier snow cover disappearance in spring. The observed trends are consistent with reported trends in the timing and length of the active growing season as determined from satellite observations of vegetation greenness and the atmospheric CO₂ record. Copyright © 2002 John Wiley & Sons, Ltd.     

Dynamics of snow ablation in a small Alpine catchment observed by repeated terrestrial laser scans

The spatio‐temporal distribution of snow in a catchment during ablation reflects changes in the total amount of snow water equivalent and is thus a key parameter for the estimation of melt water run‐off. This study explores possible rules behind the spatial variability of snow depth during the ablation season in a small Alpine catchment with complex topography. The snow depth observations are based on more than 160 000 terrestrial laser scanner data points with a spatial resolution of 1 m, which were obtained from 11 scanning campaigns of two consecutive ablation seasons. The analysis suggests that for estimating cumulative snow melt dynamics from the catchment investigated, assessing the initial snow distribution prior to the melt season is more important than addressing spatial differences in the melt behaviour. Snow volume and snow‐covered area could be predicted well using a conceptual melt model assuming spatially uniform melt rates. However, accurate results were only obtained if the model was initialized with a pre‐melt snow distribution that reflected measured mean and standard deviation. Using stratified melt rates on the other hand did not improve the model results. At least for sites with similar meteorological and topographical conditions, the model approach presented here comprises an efficient way to estimate snow depletion dynamics, especially if persistent snow accumulation pattern between years facilitate the characterization of the initial snow distribution prior to the melt. Copyright © 2011 John Wiley & Sons, Ltd.     

Estimating the distribution of snow water equivalent and snow extent beneath cloud cover in the Salt–Verde River basin,Arizona

The temporal and spatial continuity of spatially distributed estimates of snow‐covered area (SCA) are limited by the availability of cloud‐free satellite imagery; this also affects spatial estimates of snow water equivalent (SWE), as SCA can be used to define the extent of snow telemetry (SNOTEL) point SWE interpolation. In order to extend the continuity of these estimates in time and space to areas beneath the cloud cover, gridded temperature data were used to define the spatial domain of SWE interpolation in the Salt–Verde watershed of Arizona. Gridded positive accumulated degree‐days (ADD) and binary SCA (derived from the Advanced Very High Resolution Radiometer (AVHRR)) were used to define a threshold ADD to define the area of snow cover. The optimized threshold ADD increased during snow accumulation periods, reaching a peak at maximum snow extent. The threshold then decreased dramatically during the first time period after peak snow extent owing to the low amount of energy required to melt the thin snow cover at lower elevations. The area having snow cover at this later time was then used to define the area for which SWE interpolation was done. The area simulated to have snow was compared with observed SCA from AVHRR to assess the simulated snow map accuracy. During periods without precipitation, the average commission and omission errors of the optimal technique were 7% and 11% respectively, with a map accuracy of 82%. Average map accuracy decreased to 75% during storm periods, with commission and omission errors equal to 11% and 12% respectively. The analysis shows that temperature data can be used to help estimate the snow extent beneath clouds and therefore improve the spatial and temporal continuity of SCA and SWE products. Copyright © 2004 John Wiley & Sons, Ltd.     

Distributed snow process modelling: An image processing approach

An approach to spatially distribute a snow process model by segmenting images of land cover, terrain and snow properties is reported. A small 1.7 ha study area with an existing database was selected for this preliminary evaluation. The methodology was carried out over a relatively flat valley bottom at Camp Grayling, Michigan. Meteorological measurements on two sides of the area showed only small differences, so uniform meteorological variables were assumed over the site. Initial snow cover conditions were reconstructed and were distributed over the area using snow maps and sparse snow pit measurements. One metre resolution terrain, soil, vegetation and snow type maps were individually processed into class maps. These layers were then combined to produce a segmented class map, where the attributes from the data layers were known for each class. A one-dimensional model of snow processes was run for each class, then the results were mapped back into images. Shallow snow conditions provided high sensitivity of ablation patterns to meteorological conditions over a 72 h period. The model performance was assessed by comparing predicted and observed ablation patterns. The error in total snow-covered area was less than 9%. However, the location errors were greater (predicted snow where no snow was observed and observed snow where no snow was predicted). Extensive error analysis was not justified because of the lack of multiple point measurements of snow properties.     

Incorporating accumulated temperature and algorithm of snow cover calculation into the snowmelt runoff model

An accurate simulation of snowmelt runoff is of much importance in arid alpine regions. Data availability is usually an obstacle to use energy‐based snowmelt models for the snowmelt runoff simulation, and temperature‐based snowmelt models are more appealing in these regions. The snow runoff model is very popular nowadays, especially in the data sparse regions, because only temperature, precipitation and snow cover data are required for inputs to the model. However, this model uses average temperature as index, which cannot reflect the snowmelt simulation in the high altitude band. In this study, the snow runoff model is modified on the basis of accumulated active temperature. Snow cover calculation algorithm is added and is no longer needed as input but output. This makes the model able to simulate long‐time runoff and long‐time snow cover variation in every band. An examination of the improved model in the Manas River basin showed that the model is effective. It can reproduce the behaviour of the hydrology and can reflect the actual snow cover fluctuation. Copyright © 2012 John Wiley & Sons, Ltd.     

Backward snow depth reconstruction at high spatial resolution based on time‐lapse photography

We report a methodology for reconstructing the daily snow depth distribution at high spatial resolution in a small Pyrenean catchment using time‐lapse photographs and snow depletion rates derived from an on‐site measuring meteorological station. The results were compared with the observed snow depth distribution, determined on a number of separate occasions using a terrestrial laser scanner (TLS). The time‐lapse photographs were projected onto a digital elevation model of the study site, and converted into snow presence/absence information. The melt‐out date (MOD; first occurrence of melt out after peak snow accumulation) was obtained from the projected photograph series. Commencing the backward reconstruction for each grid cell at the MOD, the method uses simulated snow depth depletion rates using a temperature index approach, which are extrapolated to the grid cells of the domain to arrive at the snow distribution of the previous day. Two variants of the reconstruction techniques were applied (1) using a spatially constant degree day factor (DDF) for calculating the daily expected snow depth depletion rate, and (2) allowing a spatially distributed DDF calculated from two consecutive TLS acquisitions compared to the snow depth depletion rate observed at the meteorological station. Validation revealed that both methods performed well (average R² = 0.68; standard RMSE = 0.58), with better results obtained from the spatially distributed approach. Nevertheless, the spatially corrected DDF reconstruction, which requires TLS data, suggests that the constant DDF approach is an efficient, and for most applications sufficiently accurate and easily reproducible method. The results highlight the usefulness of time‐lapse photography for not only determining the snow covered area, but also for estimating the spatial distribution of snow depth. Copyright © 2016 John Wiley & Sons, Ltd.     

The vertical influence of temperature and precipitation on snow cover variability in the Central Tianshan Mountains,Northwest China

Seasonal snow cover in mountainous regions will affect local climate and hydrology. In this study, we assessed the role of altitude in determining the relative importance of temperature and precipitation in snow cover variability in the Central Tianshan Mountains. The results show that: (a) in the study area, temperature has a greater influence on snow cover than precipitation during most of the time period studied and in most altitudes. (b) In the high elevation area, there is a threshold altitude of 3,900 ± 400 m, below which temperature is negatively correlated whereas precipitation is positively correlated to snow cover, and above which the situation is the opposite. Besides, this threshold altitude decreases from snow accumulated period to snow stable period and then increases from snowmelt period to snow‐free period. (c) Below 2,000 m, there is another threshold altitude of 1,400 ± 100 m during the snow stable period, below (above) which precipitation (temperature) is the main driver of snow cover.     

Insights on stream temperature processes through development of a coupled hydrologic and stream temperature model for forested coastal headwater catchments

Stream temperature controls a number of biological, chemical, and physical processes occurring in aquatic environments. Transient snow cover and advection associated with lateral throughflow inputs can have a dominant influence on stream thermal regimes for headwater catchments in the rain‐on‐snow zone. Most existing stream temperature models lack the ability to properly simulate these processes. We developed and evaluated a conceptual‐parametric catchment‐scale stream temperature model that includes the role of transient snow cover and lateral advection associated with throughflow. The model consists of routines for simulating canopy interception, snow accumulation and melt, hillslope throughflow runoff and temperature, and stream channel energy exchange processes. The model was used to predict discharge and stream temperature for a small forested headwater catchment near Vancouver, Canada, using long‐term (1963–2013) weather data to compute model forcing variables. The model was evaluated against 4 years of observed stream temperature. The model generally predicted daily mean stream temperature accurately (annual RMSE between 0.57 and 1.24 °C) although it overpredicted daily summer stream temperatures by up to 3 °C during extended low streamflow conditions. Model development and testing provided insights on the roles of advection associated with lateral throughflow, channel interception of snow, and surface–subsurface water interactions on stream thermal regimes. This study shows that a relatively simple but process‐based model can provide reasonable stream temperature predictions for forested headwater catchments located in the rain‐on‐snow zone.     

Evaluating the potential of a blended passive microwave‐interactive multi‐sensor product for improved mapping of snow cover and estimations of snow water equivalent

The retrieval of Snow Water Equivalent (SWE) from remote sensing satellites continues to be a very challenging problem. In this paper, we evaluate the accuracy of a new SWE product derived from the blending of a passive microwave SWE product based on the Advanced Microwave Sounding Unit (AMSU) with a multi‐sensor snow cover extent product based on the Interactive Multi‐sensor Snow and Ice Mapping System (IMS). The microwave measurements have the ability to penetrate the snow pack, and thus, the retrieval of SWE is best accomplished using the AMSU. On the other hand, the IMS maps snow cover more reliably due to the use of multiple satellite and ground observations. The evolution of global snow cover from the blended, the AMSU and the IMS products was examined during the 2006 snow season. Despite the overall good inter‐product agreement, it was shown that the retrievals of snow cover extent in the blended product are improved when using IMS, with implications for improved microwave retrievals of SWE. In a separate investigation, the skill of the microwave SWE product was also examined for its ability to correctly estimate SWE globally and regionally. Qualitative evaluation of global SWE retrievals suggested dependence on land surface temperature: the lower the temperature, the higher the SWE retrieved. This temperature bias was attributed in part to temperature effects on those snow properties that impact microwave response. Therefore, algorithm modifications are needed with more dynamical adjustments to account for changing snow cover. Quantitative evaluation over Slovakia in central Europe, for a limited period in 2006, showed reasonably good performance for SWE less than 100 mm. Sensitivity to deeper snow decreased significantly. Copyright © 2007 John Wiley & Sons, Ltd.