An improved procedure for detection and enumeration of walrus signatures in airborne thermal imagery

In recent years, application of remote sensing to marine mammal surveys has been a promising area of investigation for wildlife managers and researchers. In April 2006, the United States and Russia conducted an aerial survey of Pacific walrus (Odobenus rosmarus divergens) using thermal infrared sensors to detect groups of animals resting on pack ice in the Bering Sea. The goal of this survey was to estimate the size of the Pacific walrus population. An initial analysis of the U.S. data using previously-established methods resulted in lower detectability of walrus groups in the imagery and higher variability in calibration models than was expected based on pilot studies. This paper describes an improved procedure for detection and enumeration of walrus groups in airborne thermal imagery.Thermal images were first subdivided into smaller 200 × 200 pixel “tiles.” We calculated three statistics to represent characteristics of walrus signatures from the temperature histogram for each tile. Tiles that exhibited one or more of these characteristics were examined further to determine if walrus signatures were present. We used cluster analysis on tiles that contained walrus signatures to determine which pixels belonged to each group. We then calculated a thermal index value for each walrus group in the imagery and used generalized linear models to estimate detection functions (the probability of a group having a positive index value) and calibration functions (the size of a group as a function of its index value) based on counts from matched digital aerial photographs.The new method described here improved our ability to detect walrus groups at both 2 m and 4 m spatial resolution. In addition, the resulting calibration models have lower variance than the original method. We anticipate that the use of this new procedure will greatly improve the quality of the population estimate derived from these data. This procedure may also have broader applicability to thermal infrared surveys of other wildlife species.     

Disaggregating and mapping crop statistics using hypertemporal remote sensing

Governments compile their agricultural statistics in tabular form by administrative area, which gives no clue to the exact locations where specific crops are actually grown. Such data are poorly suited for early warning and assessment of crop production. 10-Daily satellite image time series of Andalucia, Spain, acquired since 1998 by the SPOT Vegetation Instrument in combination with reported crop area statistics were used to produce the required crop maps. Firstly, the 10-daily (1998–2006) 1-km resolution SPOT-Vegetation NDVI-images were used to stratify the study area in 45 map units through an iterative unsupervised classification process. Each unit represents an NDVI-profile showing changes in vegetation greenness over time which is assumed to relate to the types of land cover and land use present. Secondly, the areas of NDVI-units and the reported cropped areas by municipality were used to disaggregate the crop statistics. Adjusted R-squares were 98.8% for rainfed wheat, 97.5% for rainfed sunflower, and 76.5% for barley. Relating statistical data on areas cropped by municipality with the NDVI-based unit map showed that the selected crops were significantly related to specific NDVI-based map units. Other NDVI-profiles did not relate to the studied crops and represented other types of land use or land cover. The results were validated by using primary field data. These data were collected by the Spanish government from 2001 to 2005 through grid sampling within agricultural areas; each grid (block) contains three 700 m × 700 m segments. The validation showed 68%, 31% and 23% variability explained (adjusted R-squares) between the three produced maps and the thousands of segment data. Mainly variability within the delineated NDVI-units caused relatively low values; the units are internally heterogeneous. Variability between units is properly captured. The maps must accordingly be considered “small scale maps”. These maps can be used to monitor crop performance of specific cropped areas because of using hypertemporal images. Early warning thus becomes more location and crop specific because of using hypertemporal remote sensing.     

Estimating vegetation parameter for soil erosion assessment in an alpine catchment by means of QuickBird imagery

Soil erosion rates in alpine regions are related to high spatial variability complicating assessment of risk and damages. A crucial parameter triggering soil erosion that can be derived from satellite imagery is fractional vegetation cover (FVC). The objective of this study is to assess the applicability of normalized differenced vegetation index (NDVI), linear spectral unmixing (LSU) and mixture tuned matched filtering (MTMF) in estimating abundance of vegetation cover in alpine terrain. To account for the small scale heterogeneity of the alpine landscape we used high resolved multispectral QuickBird imagery (pixel resolution = 2.4 m) of a site in the Urseren Valley, Central Swiss Alps (67 km²). A supervised land-cover classification was applied (total accuracy 93.3%) prior to the analysis in order to stratify the image. The regression between ground truth FVC assessment and NDVI as well as MTMF-derived vegetation abundance was significant (r² = 0.64, r² = 0.71, respectively). Best results were achieved for LSU (r² = 0.85). For both spectral unmixing approaches failed to estimate bare soil abundance (r² = 0.39 for LSU, r² = 0.28 for MTMF) due to the high spectral variability of bare soil at the study site and the low spectral resolution of the QuickBird imagery. The LSU-derived FVC map successfully identified erosion features (e.g. landslides) and areas prone to soil erosion. FVC represents an important but often neglected parameter for soil erosion risk assessment in alpine grasslands.     

Identifying a suitable combination of classification technique and bandwidth(s) for burned area mapping in tallgrass prairie with MODIS imagery

Prescribed fire is crucial to the ecology and maintenance of tallgrass prairie, and its application affects a variety of human and natural systems. Consequently, maps showing the location and extent of these fires are critical to managing tallgrass prairies in a manner that balances the needs of all stakeholders. Satellite-based optical remote sensing can provide the necessary input for this mapping, but it requires the development mapping methods that are specific to tallgrass prairie. In this research, we devise and test a suitable mapping method by comparing the efficacy of seven combinations of bands and indices from the MODIS sensor using both pixel and object-based classification methods. Due to the relatively small size of many prescribed fires in tallgrass prairie, scenarios based on the 250 m spatial resolution red and NIR bands outperformed those based on the coarser 500 m spatial resolution bands, and a combination of both red and NIR performed better than each 250 m band individually. Object-based classification offered no improvement over pixel-based classification, and performed poorer in some cases. Our results suggest that mapping burned areas in tallgrass prairie should be done at a minimum of 250 m spatial resolution, should used a pixel-based classification technique, and should use a combination of red and NIR.     

Understanding the 2007-2008 eruption of Anak Krakatau Volcano by combining remote sensing technique and seismic data

One of the most violent volcanic eruptions in recorded history is the Krakatau eruption on August 27, 1883. This caldera-forming eruption destroyed two thirds of the Krakatau volcanic island in the Sunda Strait resulting in the remaining three small islands later known as the Krakatau complex. From 1927 to 1929, eruptions in the center of Krakatau complex have produced a new volcano named Anak Krakatau, which continuously builds its body through eruptions until now. One eruption event took place between 2007 and 2008 with several eruptions that lasted in total from the end of October 2007 to August 2008. Eruptions were characterized by Strombolian activity with ash columns 1 km high, as well as pyroclastic and lava flows. We monitored the ground deformation of Anak Krakatau Volcano by interfering PALSAR data from June 2007 to February 2009. The result of InSAR technique shows a complex pattern of ground deformation. Inflation up to 4 cm, together with subsidence around the crater, was measured for almost three months before the eruption with a volume increase of approximately 1 × 10⁶ m³. After the eruption, the southwest side of the volcanic cone subsided by 18 cm, whereas the northeast side of the cone uplifted 12 cm in almost two years. The observed ground deformation after the eruption can be explained by 4 m of tensile opening along a dipping rectangular tensile dislocation buried in an elastic half-space, approximately 400 m below sea level.     

Estimating chlorophyll content of crops from hyperspectral data using a normalized area over reflectance curve (NAOC)

The Normalized Area Over reflectance Curve (NAOC) is proposed as a new index for remote sensing estimation of the leaf chlorophyll content of heterogeneous areas with different crops, different canopies and different types of bare soil. This index is based on the calculation of the area over the reflectance curve obtained by high spectral resolution reflectance measurements, determined, from the integral of the red–near-infrared interval, divided by the maximum reflectance in that spectral region. For this, use has been made of the experimental data of the SPARC campaigns, where in situ measurements were made of leaf chlorophyll content, LAI and fCOVER of 9 different crops – thus, yielding 300 different values with broad variability of these biophysical parameters. In addition, Proba/CHRIS hyperspectral images were obtained simultaneously to the ground measurements. By comparing the spectra of each pixel with its experimental leaf chlorophyll value, the NAOC was proven to exhibit a linear correlation to chlorophyll content. Calculating the correlation between these variables in the 600–800 nm interval, the best correlation was obtained by computing the integral of the spectral reflectance curve between 643 and 795 nm, which practically covers the spectral range of maximum chlorophyll absorption (at around 670 nm) and maximum leaf reflectance in the infrared (750–800 nm). Based on a Proba/CHRIS image, a chlorophyll map was generated using NAOC and compared with the land-use (crops classification) map. The method yielded a leaf chlorophyll content map of the study area, comprising a large heterogeneous zone. An analysis was made to determine whether the method also serves to estimate the total chlorophyll content of a canopy, multiplying the leaf chlorophyll content by the LAI. To validate the method, use was made of the data from another campaign ((SEN2FLEX), in which measurements were made of different biophysical parameters of 7 crops, and hyperspectral images were obtained with the CASI imaging radiometer from an aircraft. Applying the method to a CASI image, a map of leaf chlorophyll content was obtained, which on, establishing comparisons with the experimental data allowed us to estimate chlorophyll with a root mean square error of 4.2 μg/cm², similar or smaller than other methods but with the improvement of applicability to a large set of different crop types.     

Study of sample size and variability of cluster class distribution-an experiment on erts digital data

ERTS; MSS data of Obon area, Montalban region, Spain were clustered into 14 non-supervised cluster classes. Statistical analysis of frequency distribution of these cluster classes in different units of interest for samples of 25, 50, 100 and 200 pixels was carried out. The results indicate that the variability of distribution is more in rock unils, and a sample size of 100 pixels represents nearest to the mean. The variability is less in non-rock units (e.g. water) and a sample size of 50 pixels is the optimum, at the present level of classification.     

Estimation of gross primary production in wheat from in situ measurements

Gross primary production (GPP) is a parameter of significant importance for carbon cycle and climate change research. Remote sensing combined with other climate and meteorological data offers a convenient tool for large scale GPP estimation. This paper presents a study of GPP estimation using three methods with in situ measurements of canopy reflectance, LAI, and the photosynthetically active radiation (PAR). First, because LAI is considered as an indicator of the factor of absorbed PAR (f_APAR), it provides reasonable estimates of GPP for all types of wheat with coefficient of determination R² of 0.7353. The second method uses four kinds of vegetation indices (VIs) to estimate GPP because these indices are suggested to be reliable candidates in the estimation of light use efficiency (LUE). Good determination coefficients were acquired in estimating GPP with R² ranging from the lowest of 0.7604 for NDVI to the highest of 0.8505 for EVI. A new method was proposed for the estimation of GPP following the Monteith logic, which considering GPP as a product of VI × VI × PAR. Results indicated that this method can provide the best estimates of GPP as determination coefficient R² increased largely compared to the other two methods. EVI × EVI × PAR was demonstrated to be the most suitable for the estimation of GPP with the highest R² of 0.9207, which was about 10% larger as compared to GPP estimated from the single EVI. These results will be helpful for the development of new models of GPP estimation with all remote sensing inputs.     

Variability of SeaWiFS-derived chlorophyll-a concentrations in waters off central east coast of India, 1998–2003

Seasonal and inter-annual variability in satellite-derived estimates of near-surface chlorophyll-a concentration off the central east coast of India from 1998 to 2003 is examined. Wind-induced upwelling predominates in late spring and winter, coinciding with the maximum in solar radiation, leading to increased accumulations of phytoplankton biomass. Chlorophyll concentrations varied from 2 to 10 mg/m³ over the central east coast of India and were generally lower in June and maximal in March. Chlorophyll concentrations along the coast followed a similar seasonal pattern (ranging from 0.5 to 6 mg/m³); however, concentrations were always greater on the Machilipatnam and Nellore compared with the Visakhapatnam and Chennai. The lack of upwelling favorable conditions results in the majority of the southern side of the central east coast of India waters being insufficient, which is reflected in low or moderate productivity. The possible reasons and observed correlations between chlorophyll-a and upwelling index during the study period was discussed.     

Terrestrial laser scanning to estimate plot-level forest canopy fuel properties

This paper evaluates the potential of a terrestrial laser scanner (TLS) to characterize forest canopy fuel characteristics at plot level. Several canopy properties, namely canopy height, canopy cover, canopy base height and fuel strata gap were estimated. Different approaches were tested to avoid the effect of canopy shadowing on canopy height estimation caused by deployment of the TLS below the canopy. Estimation of canopy height using a grid approach provided a coefficient of determination of R² = 0.81 and an RMSE of 2.47 m. A similar RMSE was obtained using the 99th percentile of the height distribution of the highest points, representing the 1% of the data, although the coefficient of determination was lower (R² = 0.70). Canopy cover (CC) was estimated as a function of the occupied cells of a grid superimposed upon the TLS point clouds. It was found that CC estimates were dependent on the cell size selected, with 3 cm being the optimum resolution for this study. The effect of the zenith view angle on CC estimates was also analyzed. A simple method was developed to estimate canopy base height from the vegetation vertical profiles derived from an occupied/non-occupied voxels approach. Canopy base height was estimated with an RMSE of 3.09 m and an R² = 0.86. Terrestrial laser scanning also provides a unique opportunity to estimate the fuel strata gap (FSG), which has not been previously derived from remotely sensed data. The FSG was also derived from the vegetation vertical profile with an RMSE of 1.53 m and an R² = 0.87.     

Mapping beech (Fagus sylvatica L.) forest structure with airborne hyperspectral imagery

Estimating forest structural attributes using multispectral remote sensing is challenging because of the saturation of multispectral indices at high canopy cover. The objective of this study was to assess the utility of hyperspectral data in estimating and mapping forest structural parameters including mean diameter-at-breast height (DBH), mean tree height and tree density of a closed canopy beech forest (Fagus sylvatica L.). Airborne HyMap images and data on forest structural attributes were collected from the Majella National Park, Italy in July 2004. The predictive performances of vegetation indices (VI) derived from all possible two-band combinations (VI_(i,j) = (R_i − R_j)/(R_i + R_j), where R_i and R_j = reflectance in any two bands) were evaluated using calibration (n = 33) and test (n = 20) data sets. The potential of partial least squares (PLS) regression, a multivariate technique involving several bands was also assessed. New VIs based on the contrast between reflectance in the red-edge shoulder (756–820 nm) and the water absorption feature centred at 1200 nm (1172–1320 nm) were found to show higher correlations with the forest structural parameters than standard VIs derived from NIR and visible reflectance (i.e. the normalised difference vegetation index, NDVI). PLS regression showed a slight improvement in estimating the beech forest structural attributes (prediction errors of 27.6%, 32.6% and 46.4% for mean DBH, height and tree density, respectively) compared to VIs using linear regression models (prediction errors of 27.8%, 35.8% and 48.3% for mean DBH, height and tree density, respectively). Mean DBH was the best predicted variable among the stand parameters (calibration R² = 0.62 for an exponential model fit and standard error of prediction = 5.12 cm, i.e. 25% of the mean). The predicted map of mean DBH revealed high heterogeneity in the beech forest structure in the study area. The spatial variability of mean DBH occurs at less than 450 m. The DBH map could be useful to forest management in many ways, e.g. thinning of coppice to promote diameter growth, to assess the effects of management on forest structure or to detect changes in the forest structure caused by anthropogenic and natural factors.     

Biomass mapping using forest type and structure derived from Landsat TM imagery

A method for mapping forest biomass was developed and tested on a study area in western Newfoundland, Canada. The method, BIOmass from Cluster Labeling Using Structure and Type (BioCLUST), involves: (i) hyperclustering a Landsat TM image, (ii) automatically labeling the clusters with information about forest type and structure, and (iii) applying stand-level equations that estimate biomass as a function of height and crown closure within forest species-type classes. BioCLUST was validated with biomass values measured at geo-referenced field plots and mapped across the study area using an existing forest management photo-inventory. Root mean square error (RMSE) values ranged from 43 to 79 tonnes/ha, and were lowest for intermediate height classes when validated with field plots. Overall bias was negative at 10 tonnes/ha compared with a negative bias of 3 tonnes/ha estimated for the photo-inventory. Validation of the biomass map gave RMSE values of 37–47 tonnes/ha and overall landscape biomass estimates within 0.4% of biomass mapped by the photo-inventory. BioCLUST offers an alternative to other biomass mapping methods when scene-specific plot data are limited and a photo-inventory is available for a representative portion of a Landsat scene.     

Analyses of Metro Station Service Area in Shanghai Downtown Based on Traffic Networks

Service area research is one of the pivotal topics in Urban Geography. This article first put forward a model of urban population estimation. And on the basis we measured the size and distribution of population in downtown Shanghai, China. The population model was confirmed well by the traditional survey model. Then we extracted a 1-month actual-time data set contains geo-location by collecting in Sina Weibo data, and generated Voronoi diagram by these data which denoted the service patches. We assigned population to each patch. Second part, we proposed a shortest distance algorithm, a minimum time algorithm and an improved p-median algorithm, took advantages of these three methods to divide the service area of metro stations based on patches. Subsequently, we computed the service population in each service area. Last, we took metro line 1 and 2 as examples to research the relationship among 3 location-allocation methods in detail. The results showed that: The spatial distribution of population of the core city in Shanghai emerged a descending trend from center to periphery clearly. All indicators (including area, population, distance and time) in central city within inner ring road have changed little compared with the region between inner and outer ring road. Yet the improved p-median algorithm has a certain effect of optimization. It presented a scientific and rational travel scheme for citizens cost smallest price to select better starting metro station. The study results should contribute to theoretical and technical support for location-allocation of public service facilities.     

Improving Classification Accuracy Assessments with Statistical Bootstrap Resampling Techniques

The use of remotely sensed imagery to generate land cover models is common today. Validation of these models typically involves the use of an independent set of ground-truth data that are used to calculate an error matrix resulting in estimates of omission, commission, and overall error. However, each estimate of error contains a degree of uncertainty itself due to: (1) conceptual bias; (2) location/registration and co-registration errors; and (3) variability in the sample sites used to produce and validate the model. In this study, focus was not placed upon describing land cover mapping techniques, but rather the application of bootstrap resampling to improve the characterization of classification error, demonstrate a method to determine uncertainty from sample site variability, and calculate confidence limits using statistical bootstrap resampling of 500 sample sites acquired within a single Landsat 5 TM image. The sample sites represented one of five land cover categories (water, roads, lava, irrigated agriculture, and rangelands), with each category containing 100 samples. The sample set was then iteratively resampled (n = 200) and 65 sites were randomly selected (without replacement) for use as classification training sites, while the balance (n = 35) were used for validation. Imagery was subsequently classified using a maximum likelihood technique and the model validated using a standard error matrix. This classification-validation process was repeated 200 times. Confidence intervals were then calculated using the resulting omission and commission errors. Results from this experiment indicate that bootstrap resampling is an effective method to characterize classification uncertainty and determine the effect of sample bias.     

Predicting forest structural parameters using the image texture derived from WorldView-2 multispectral imagery in a dryland forest,Israel

Estimation of forest structural parameters by field-based data collection methods is both expensive and time consuming. Satellite remote sensing is a low-cost alternative in modeling and mapping structural parameters in large forest areas. The current study investigates the potential of using WordView-2 multispectral satellite imagery for predicting forest structural parameters in a dryland plantation forest in Israel. The relationships between image texture features and the several structural parameters such as Number of Trees (NT), Basal Area (BA), Stem Volume (SV), Clark-Evans Index (CEI), Diameter Differentiation Index (DDI), Contagion Index (CI), Gini Coefficient (GC), and Standard Deviation of Diameters at Breast Heights (SDDBH) were examined using correlation analyses. These variables were obtained from 30 m × 30 m square-shaped plots. The Standard Deviation of Gray Levels (SDGL) as a first order texture feature and the second order texture variables based on Gray Level Co-occurrence Matrix (GLCM) were calculated for the pixels that corresponds to field plots. The results of the correlation analysis indicate that the forest structural parameters are significantly correlated with the image texture features. The highest correlation coefficients were calculated for the relationships between the SDDBH and the contrast of red band (r = 0.75, p < 0.01), the BA and the entropy of blue band (r = 0.73, p < 0.01), and the GC and the contrast of blue band (r = 0.71, p < 0.01). Each forest structural parameter was modeled as a function of texture measures derived from the satellite image using stepwise multi linear regression analyses. The determination coefficient (R²) and root mean square error (RMSE) values of the best fitting models, respectively, are 0.38 and 109.56 ha⁻¹ for the NT; 0.54 and 1.79 m² ha⁻¹ for the BA; 0.42 and 27.18 m³ ha⁻¹ for the SV; 0.23 and 0.16 for the CEI; 0.32 and 0.05 for the DDI; 0.25 and 0.06 for the CI; 0.50 and 0.05 for the GC; and 0.67 and 0.70 for the SDDBH. The leave-one-out cross-validation technique was applied for validation of the best-fitted models (R² > 0.50). In conclusion, cross-validated statistics confirmed that the structural parameters including the BA, SDDBH, and GC can be predicted and mapped with a reasonable accuracy using the texture features extracted from the spectral bands of WorldView-2 image.     

Leaf area index retrieval using gap fractions obtained from high resolution satellite data: Comparisons of approaches,scales and atmospheric effects

This study is aimed at demonstrating the feasibility of the large scale LAI inversion algorithms using red and near infrared reflectance obtained from high resolution satellite imagery. Radiances in digital counts were obtained in 10 m resolution acquired on cloud free day of August 23, 2007, by the SPOT 5 high resolution geometric (HRG) instrument on mostly temperate hardwood forest located in the Great Lakes – St. Lawrence forest in Southern Quebec. Normalized difference vegetation index (NDVI), scaled difference vegetation index (SDVI) and modified soil-adjusted vegetation index (MSAVI) were applied to calculate gap fractions. LAI was inverted from the gap fraction using the common Beer–Lambert's law of light extinction under forest canopy. The robustness of the algorithm was evaluated using the ground-based LAI measurements and by applying the methods for the independently simulated reflectance data using PROSPECT + SAIL coupled radiative transfer models. Furthermore, the high resolution LAI was compared with MODIS LAI product. The effects of atmospheric corrections and scales were investigated for all of the LAI retrieval methods. NDVI was found to be not suitable index for large scale LAI inversion due to the sensitivity to scale and atmospheric effects. SDVI was virtually scale and atmospheric correction invariant. MSAVI was also scale invariant. Considering all sensitivity analysis, MSAVI performed best followed by SDVI for robust LAI inversion from high resolution imagery.     

Monitoring urban growth on the European side of the Istanbul metropolitan area: A case study

Istanbul is the largest city in Turkey with an area of around 5750 km² and a population of around 10.8 M (2000). In 1980, the population was only around 4.7 M and so has more than doubled in only 2 decades. In 2000, around 65% of the population were living on the European side of the city with its large industrial/commercial and trade centres. The population is increasing as a result of both births exceeding deaths and mass immigration. Consequently, planned and unplanned housing are increasing while green areas are decreasing in area. Monitoring urban growth will enable the Municipality of Istanbul to better manage this complex urban area.     

结合高斯马尔可夫随机场纹理模型与支撑向量机在高分辨率遥感图像上提取道路网

在高分辨率遥感图像上,道路网的同物异谱现象更为突出,因此其提取难度更大。提出了一种马尔可夫随机场纹理模型与支撑向量机分类相结合的道路网提取方法。其基本过程是:利用高斯马尔科夫随机场模型6个归一化特征值进行支撑向量机的分类得到道路斑块,利用形态学算子对其进行初步连接并提取轴线,然后通过斑块轴线的启发式连接得到最终道路网。试验证明方法是有效的。     

Spectral mixture analysis to monitor defoliation in mixed-aged Eucalyptus globulus Labill plantations in southern Australia using Landsat5-TM and EO-1Hyperion data

Defoliation is a key parameter of forest health and is associated with reduced productivity and tree mortality. Assessing the health of forests requires regular observations over large areas. Satellite remote sensing provides a cost-effective alternative to traditional ground-based assessment of forest health, but assessing defoliation can be difficult due to mixed pixels where vegetation cover is low or fragmented. In this study we apply a novel spectral unmixing technique, referred to as weighted Multiple Endmember Spectral Mixture Analysis (wMESMA), to Landsat 5-TM and EO-1 Hyperion data acquired over a Eucalyptus globulus (Labill.) plantation in southern Australia. This technique combines an iterative mixture analysis cycle allowing endmembers to vary on a per pixel basis (MESMA) and a weighting algorithm that prioritizes wavebands based on their robustness against endmember variability. Spectral mixture analysis provides an estimate of the physically interpretable canopy cover, which is not necessarily correlated with defoliation in mixed-aged plantations due to natural variation in canopy cover as stands age. There is considerable variability in the degree of defoliation as well as in stand age among sites and in this study we found that results were significantly improved by the inclusion of an age correction algorithm for both the multi-spectral (R²_{no age correction} = 0.55 vs R²_{age correction} = 0.73 for Landsat) and hyperspectral (R²_{no age correction} = 0.12 vs R²_{age correction} = 0.50 for Hyperion) image data. The improved accuracy obtained from Landsat compared to the Hyperion data illustrates the potential of applying SMA techniques for analysis of multi-spectral datasets such as MODIS and SPOT-VEGETATION.     

Determination of chlorophyll content of small water bodies (kettle holes) using hyperspectral airborne data

This study presents an approach for chlorophyll content determination of small shallow water bodies (kettle holes) from hyperspectral airborne ROSIS and HyMap data (acquired on 15 May and 29 July 2008 respectively). Investigated field and airborne spectra for almost all kettle holes do not correspond to each other due to differences in ground sampling distance. Field spectra were collected from the height of 30–35 cm (i.e. area of 0.01–0.015 m²). Airborne pixels of ROSIS and HyMap imageries cover an area of 4 m² and 16 m² respectively and their spectra are highly influenced by algae or bottom properties of the kettle holes. Analysis of airborne spectra revealed that chlorophyll absorption near 677 nm is the same for both datasets. In order to enhance absorption properties, both airborne hyperspectral datasets were normalized by the continuum removal approach. Linear regression algorithms for ROSIS and HyMap datasets were derived using normalized average chlorophyll absorption spectra for each kettle hole. Overall accuracy of biomass mapping for ROSIS data was 71%, and for HyMap 64%. Biomass mapping results showed that, depending on the type of kettle hole, algae distribution, the ‘packaging effect’ and bottom reflection lead to miscalculations of the chlorophyll content using hyperspectral airborne data.