大地电磁测深和电偶源频率电磁测深资料反演

在研究大地电磁响应函数频散关系的基础上,构制了一套滤波系数算法,以用于由一套视电阻率资料估算相应的阻抗相位.理论模型和实际大地电磁观测资料的数字试验表明,该法是行之有效的.由频散关系估算的相位值与观测的相位资料的比较,可用于检验观测资料是否满足频散关系.利用经频散关系校正的阻抗相位值,进行大地电磁阻抗的联合反演则可望获得更为可靠的结果.研究了观测频带相互衔接的电偶源频率电磁测深和大地电磁测深视电阻率的一维联合反演问题.对两个实测点两种电磁法的观测资料进行了联合反演试验,与钻井资料对比表明,所获得的电性分层参数是较为可信的.在补充了由频散关系获取的电偶源频率电磁相位资料后,对于两种电磁法的视电阻率————阻抗相位、阻抗实部视电阻率-阻抗虚部视电阻率进行了拟大地电磁反演,获得了相近的反演结果.      

一维垂直各向异性介质频率域海洋可控源电磁资料反演方法

本文提出了一维垂直各向异性(VTI)介质倾斜偶极源频率域海洋可控源电磁(CSEM)资料高斯-牛顿反演方法.在电阻率各向异性介质水平偶极源和垂直偶极源海洋CSEM正演算法的基础上,利用欧拉旋转方法,实现了各向异性介质倾斜偶极源海洋CSEM正演算法.海洋可控源电磁场关于地下介质横向电阻率(ρ_h)和垂向电阻率(ρ_v)的偏导数(即灵敏度矩阵)是解析计算的,结合垂直各向异性介质横向电阻率与垂向电阻率的关系,将各向异性率融入到正则化因子选择中,实现了正则化因子的自适应选择.理论模型合成数据和实测资料反演算例表明,我们提出的反演方法能够较准确的重构海底围岩和基岩的各向异性电阻率以及高阻薄层的埋藏深度、厚度和垂向电阻率.     

大地电磁一维磁化率、电阻率主轴各向异性正演

大地电磁(Magnetotelluric, MT)正演是其资料解释的基础,也是认识地球介质响应特征的重要手段.磁化率和电阻率是影响MT响应的两个主要物性参数,真实固体地球介质电阻率各向异性现象普遍存在且铁磁性等物质的磁化率显著.而当前成熟的MT资料解释技术仍局限于各向同性介质、电阻率单一参数.本文从Maxwell方程组出发,推导了磁化率、电阻率主轴各向异性均匀半空间和层状介质的视电阻率及相位的解析表达式.然后,通过两个不同类型模型的计算对比,验证了算法的正确性.最后,对典型模型进行计算,结果表明某些情况下磁化率的影响不可忽略,对于低阻地层,当其电阻率与相对磁导率的乘积大于围岩的电阻率时,其视电阻率将表现为高阻.本文开发的正演算法,有助于认识磁化率、电阻率主轴各向异性时的MT响应特征,也可为后期二维、三维正演提供参考对比.     

各向异性介质的大地电磁反演及其有关地震前兆场的讨论

论述了某些条件下地球介质呈现出的电导率各向异性行为及层状对称各向异性介质大地电磁资料的反演方法；实测大地电磁(MT)资料的各向异性模型反演解释有助于识别地震深部电导率各向异性变化前兆，并对研究地壳深部应力状态和形变带提供了若干有用的信息．      

MT相对视电阻率定义及应用研究

本文在总结分析前人对MT视电阻率研究的基础上,提出了一种新的MT视电阻率定义方法—MT相对视电阻率,探讨了其在深部探测中的适用性.MT二维地电模型计算结果表明,TM模式相对视电阻率与Cagniard视电阻率类似,误差在容许范围内,其用于深部探测是可行的.南岭于都一赣县矿集区盘古山的MT实测资料验证了相时视电阻率在解决深部地质问题中的的可行性和有效性.MT相对视电阻率避开了低频磁场观测的复杂性,避免了低频磁场分量变化带来的畸变,为利用天然电场解决深部介质的电阻率分布奠定了基础.     

天祝-永登地区大地电磁资料的一维各向异性反演

对分布在甘肃天祝、永登一带的10个大地电磁测点资料进行了一维各向异性介质反演研究，并与二维对称各向异性介质反演结果进行了对比。结果表明在大多数情况下一维各向异性反演有可能揭示出地壳介质电导率各向异性结构的主要特征；同时利用某些平均阻抗和特征阻抗的一维各向同性介质反演亦可获得较为可信的电性分层界面。反演所获得之介质电导率可能为各主方向电导率主值的某种平均。     

大地电磁资料的灵敏度研究

本文研究了大地电磁资料对地球电性结构模型参数的灵敏度,它在反演解释中具有重要意义.通过研究均匀半空间中视电导率资料的灵敏度函数与计算分析实际观测资料的Fréchet导数和斜率表明,视电导率资料的灵敏度在地表最大,从地表向下呈指数衰减,频率愈高,电导率愈大,衰减也愈快.视电阻率资料和阻抗相位资料对高频、浅层和低阻层具有更高的灵敏度,几何参数的平均灵敏度高于电性参数的平均灵敏度,通常阻抗相位资料比视电阻率资料更灵敏.同时,根据阻抗实部定义的视电阻率与Kunetz定义的时间域大地电磁响应,反映地层电性差异的灵敏度最高. 文章还指出,在实际的反演解释中,如何正确有效地应用阻抗相位资料,提高分辨能力,仍是急待解决的问题.     

大地电磁测深资料的联合反演研究

本文从大地电磁扬的色散关系出发,阐述了进行大地电磁资料一维联合反演的物理意义。论证了对于以色散关系相联系的一对大地电磁响应函数,特别是阻抗实部和虚部视电阻率进行联合反演的必要性和可能的应用前景。对比研究了大地电磁阻抗各单参量及其联合反演的效果。结果表明,在加快反演迭代速度,限定反演解的非唯一性、保证反演迭代的稳定进行等方面,联合反演比单参量反演具有明显的优越性;在大多数情况下,阻抗实部视电阻率和阻抗虚部视电阻率联合反演的效果要比通常所采用的常规视电阻率和阻抗相位的联合反演效果好。实际大地电磁资料的试验表明,各种不同平均阻抗的利用和综合反演解释将有助于获得更为可靠的结果。     

甘肃及邻近地区的各向异性介质MT反演及该区地壳深部应力场和形变带

分析了某些条件下地球介质的电导率各向异性行为，并应用一维层状对称各向异性介质大地电磁资料的反演方法，对甘肃及其邻近地区实测ＭＴ资料的各向异性模型进行反演解释，由此确定地壳深部应力场和形变带的方向。     

尖锐边界反演在临江市六道沟可控源音频大地电磁测深数据反演中的应用

在实际大地电磁测深数据反演过程中,为了得到更加清晰的电性单元分界面,传统的Occam平滑反演方法遇到了挑战,本文讨论了sharp boundary inversion(SBI)反演的理论及其应用.通过模型试算,对比Occam和SBI的反演效果,证明了SBI反演划分层状介质的可靠性.本文对临江市六道沟地区实测可控源音频大地电磁测深(CSAMT)数据进行了全区视电阻率转换,然后对全区视电阻率进行Occam反演和SBI反演.最后对比已有地质资料,表明SBI反演能够用于CSAMT数据的处理中.     

THE DISPERSION RELATION, OF EARTH''S ELECTROMAGNETIC RESPONSE FUNCTIONS AND THE JOINT INVERSION OF DATA

On the basis of the dispersion relations of MT field, the necessity and applied prospects of the joint inversions using a pair of MT response functions which are correlative with the dispersion relations, are infered. A filter coefficient algorithm is made, with which the corresponding impedance phase data can be estimated using a set of apparent resistivities. The tests for the observed MT data show that when comparing the impedance phase estimated using the dispersion relation with the ob served phase, it can be checked whether the dispersion relation between observed apparent resistivity and phase data is satisfied or not, and that the use of the phase data corrected using the dispersion relation in the joint inversion is advantageous to obtain more confident results. It is shown that joint inversions are more advantageous than single parameter inversions, and that in the most case the joint inversion using the apparent resistivities of impedance real and imaginary parts is more advantageous than the jointinversion using the normal apparent resistivity and impedance phase. The existence of the dipersion relations between the ratio apparent resistivity and corresponding impedance phase of the orthogonal electric and magnetic field horizontal Components in the frequency EM sounding with horizontal electric dipole(FEMS) are discussed, the better effect of the joint inversion using the pair of EM response functions is obtained. The problems on the one-dimensional joint inversion for the MT and FEMS apparent resistivities, for which the observed frequency bands partly overlape each other, are studied. It is shown that this joint inversion is applicable and effective:the joint inversions of the practical data for two kinds of EM methods at two sites give the results well corresponding to the drilling data. The simulated MT inversions for the data of two kinds of EM methods are made, and more confident results also are obtained.     

3-D inversion of MT data from the Sabalan geothermal field,Ardabil, Iran

Since the true Earth is 3-D in nature, a three-dimensional (3-D) inversion has clear advantages over lower dimensional inversions. We utilized a 3-D magnetotelluric (MT) inversion code, WSINV3DMT, to obtain a realistic resistivity model using a long period MT data set collected in the Northwest Sabalan geothermal field in Ardabil, Iran. The apparent resistivity and phase curves, the magnetic induction vectors, the impedance polar diagrams and the rotational invariant of impedance tensor, indicate a complex 3-D conductivity structure. After setting up the model parameters and designing the appropriate block discretization, we performed the 3-D inversions for two sets of observed data; one set includes the full MT impedance tensor and another set contains only off-diagonal elements of the MT impedance. The final model was selected according to the relative magnitude of the data misfit and the model norm with respect to various Lagrangian multipliers. The results of this study illustrate the 3-D inversion of the off-diagonal elements of MT impedance tensor is precisely enough to explain the structures related to the geothermal source. The obtained results were compared with the results of available 2-D models and they are then interpreted using all of the geological and drilling data of the area. The main outcome of this study is the precise delineation of the geometry of geothermal source that is located at the center of the study area with a surface coverage of about 7 km².     

The inversion of the data of magnetotelluric sounding and electromagnetic frequency sounding with horizontal electric dipole

On the basis of the dispersion relation of magnetotelluric response functions (MTRF), a filter coefficient algorithm has been made, with which the corresponding impedance phase data can be estimated using a set of apparent resistivity data. The tests of theoretical models and observed magnetotelluric (MT) data show that this algorithm is effective. Comparing the impedance phase estimated using dispersion relation with the observed phase, it can be checked whether the dispersion relation between the observed apparent resistivities and phase data was satisfied. The use of phase data corrected using the dispersion relation in the joint inversion for MT impedance is advantageous to obtain more reliable inversion results. The problems on the one-dimensional joint inversion for the (MT) apparent resistivity and the apparent resistivity of the frequency electromagnetic sounding (FEMS) with horizontal electric dipole, whose observed frequency bands are linked up each other, are studied. The observed data of two kinds of electromagnetic (EM) methods at two sites are used to inverse, the comparison with the drilling data show the results are more reliable. To supply the phase data of FEMS using the dispersion relation, for the apparent resistivity-phase data and impedance real part-imaginary part apparent resistivities of two kinds of EM methods the imitated MT joint inversions are made, and more similar results also are obtained. The Chinese version of this paper appeared in the Chinese edition ofActa Seismologica Sinica,15, 91–96, 1993. The projects sponsored by the Chinese Joint Seismological Science Foundation.     

考虑电流型畸变的大地电磁三维反演

大地电磁测深(MT)的观测数据易受到由近地表小尺度非均匀体或地形起伏引起的电流型畸变干扰,消除或压制这种干扰对获取可靠的深部电性结构至关重要.当区域结构为二维时,电流型畸变可采用张量分解等方法予以消除或压制.当区域结构为三维时,畸变问题更加复杂和严重,传统张量分解方法往往效果不佳或无效,严重地制约了MT三维反演技术的实用性.对此,本文提出一种考虑电流型畸变的MT三维反演算法,将完整的电流型畸变参数引入到目标函数,并采用非线性共轭梯度法与电阻率参数同时反演,从而达到压制畸变的目的.该算法有两个关键点:一是通过分析实测数据所遭受畸变的分布特征,在目标函数中对其进行有效约束;二是在迭代过程中,通过自适应地调整双正则化因子保障算法的稳定和效率.理论模型测试结果显示,常规三维反演算法不能合理解释数据中的畸变成分,而只能通过引入虚假异常体强制地拟合受畸变数据,从而造成电阻率模型严重失真.与之相比,本文算法能够在反演中自动求解各测点所受到的畸变,获得更接近真实的电阻率模型.     

利用大地电磁三维反演方法获得二维剖面附近三维电阻率结构的可行性

大地电磁野外实测数据月前大多为二维剖面数据.如何反演这些二维剖面数据获得较为接近实际地电情况的结果,是多数大地电磁工作者关心的问题.我们通过对理论模型的三维响应进行分析和对合成数据及实测资料的反演结果进行对比研究,讨论了利用三维反演的方法来获得大地电磁二维剖面附近三维电阻率结构的可行性.结果表明:可用三维反演的方法来解...     

Magnetotelluric resistivity modeling for 3D characterization of geothermal reservoirs in the Western side of Mt. Aso, SW Japan

Geothermal reservoirs are usually located at a depth range of 2 to 5 km, so to efficiently utilize such resources an advanced prospecting method is needed to detect these deep geologic structures. This study aimed to three-dimensionally characterize geothermal reservoirs by a combination of Magnetotelluric (MT) survey, inversion analysis of apparent resistivity, and interpolation of the resistivity data obtained. The western side of Mt. Aso crater, southwest Japan, was chosen as the case study area. Three hot springs exist there and a fault is assumed to go in the direction connecting them. A MT survey was carried out at 26 sites and the data processed by a remote reference method to reduce artificial noises. Based on skewness and Mohr circle analyses of the impedance tensor, the local geologic structure at each site could be approximated as horizontally layered and therefore, a one-dimensional inversion analysis was applied to the MT raw data. The resultant resistivity column data were then interpolated by the three-dimensional optimization principle method. The resistivity distributions obtained clarified continuous conductors with especially low resistivity (less than 10 Ω·m) at the hot springs along the fault. Because the resistivity decreases largely with an abundance of clay minerals, the conductors could be considered to correspond with the cap rocks. Thus, two geothermal reservoirs, whose shapes were estimated to be pillar, were detected under the cap rocks in an elevation range of − 1000 to − 3000 m. By comparing the resistivity distributions with the temperature distributions based on fluid-flow calculations at a steady state using FEM, the validity of the location and dimension of the estimated reservoirs were confirmed.     

山西阳高～河北容城剖面大地电磁资料的初步解释──阻抗张量分解技术及其应用

介绍了阻抗张量分解技术及其在阳高～容城剖面的大地电磁资料解释中的应用。在某些测点局部电流畸变的影响较严重，用张量分解技术对资料分析后表明，沿剖面的区域异常总体上具二维性质，分解技术处理后的视电阻率和相位资料与地质构造有较好的对应性。事实表明，阻抗张量分解技术是对大地电磁资料进行分析解释的有力工具     

CSAMT单分量数据解释方法

可控源音频大地电磁法(CSAMT)一直沿用大地电磁法(MT)的办法,通过计算电场分量与磁场分量的比值,求取卡尼亚视电阻率.而CSAMT场源已知,电场分量和磁场分量都与地下电阻率存在一定的关系,可以单独采用CSAMT电场分量或者磁场分量提取地下介质的视电阻率.本文通过分析电场分量与磁场分量的数据特性,提出利用CSAMT电场单分量数据进行视电阻率的计算,用改进的广义逆矩阵反演方法,使初始模型中的地电层数等于频道个数,克服了以往反演计算中层数较少的问题;实现全场区电场分量视电阻率曲线的拟合反演.同时对单分量视相位计算方法进行分析,结合山西大同地区积水采空区探测及数据解释结果,论证本文提出的单分量解释方法的有效性.     

面向目标自适应有限元法的带地形三维大地电磁各向异性正演模拟

传统三维大地电磁各向异性模拟均是基于规则六面体网格,计算精度有限且较难拟合复杂地质条件.本文采用面向目标自适应非结构矢量有限元法,对三维大地电磁各向异性介质进行模拟.首先从电场双旋度方程出发,利用伽辽金方法建立变分方程;然后利用电流密度连续性条件构建适合大地电磁各向异性问题的加权后验误差估计方法,实现面向目标的网格自适应正演;最后通过典型算例分析各向异性对网格自适应和大地电磁响应的影响特征以及各向异性的识别方法.本文算法能够高精度地拟合起伏地表和任意各向异性介质,适用于分析复杂地电条件大地电磁响应特征,为提高大地电磁资料解释水平提供了理论基础.