共查询到20条相似文献,搜索用时 46 毫秒
1.
Barbara A. Cohen Cyrena A. Goodrich Klaus Keil 《Geochimica et cosmochimica acta》2004,68(20):4249-4266
Polymict ureilites DaG 164/165, DaG 319, DaG 665, and EET 83309 are regolith breccias composed mainly of monomict ureilite-like material, but containing ∼2 vol% of feldspathic components. We characterized 171 feldspathic clasts in these meteorites in terms of texture, mineralogy, and mineral compositions. Based on this characterization we identified three populations of clasts, each of which appears to represent a common igneous (generally basaltic) lithology and whose mafic minerals show a normal igneous fractionation trend of near-constant Fe/Mn ratio over a range of Fe/Mg ratios that extend to much higher values than those in monomict ureilites. The melts represented by these populations are unlikely to be impact melts, because the ubiquitous presence of carbon in polymict ureilites (the regolith of the ureilite parent body) implies that impact melts would have crystallized under conditions of carbon redox control and therefore have highly magnesian mafic mineral compositions with constant Mn/Mg ratio. Therefore, these melts appear to be indigenous products of igneous differentiation on the ureilite parent body (UPB), complementary to the olivine-pigeonite residues represented by the majority of monomict ureilites.The most abundant population is characterized by albitic plagioclase in association with pyroxenes, phosphates, ilmenite, silica, and incompatible-element enriched glass. Model calculations suggest that it formed by extensive fractional crystallization of the earliest melt(s) of precursor materials from which the most magnesian (shallowest) olivine-pigeonite ureilites formed. A less abundant population, characterized by labradoritic plagioclase, may have formed from melts complementary to more ferroan olivine-pigeonite ureilites, and derived from deeper in the UPB. The third population, characterized by the presence of olivine and augite, could only have formed from melts produced at greater depths in the UPB than the olivine-pigeonite ureilites. Many other feldspathic clasts cannot be positively associated with any of these three populations, because their mafic mineral compositions exhibit carbon redox control. However, they may be products of early crystallization of basaltic melts produced on the UPB, before carbon was exhausted by reduction.Partial melting on the ureilite parent body was a fractional (or incremental) process. Melts were produced early in UPB history, and most likely extracted rapidly, thus preserving primitive chemical and oxygen isotopic signatures in the residues. 相似文献
2.
Hilary Downes David W. Mittlefehldt John W. Valley 《Geochimica et cosmochimica acta》2008,72(19):4825-4844
Ureilites are ultramafic achondrites that exhibit heterogeneity in mg# and oxygen isotope ratios between different meteorites. Polymict ureilites represent near-surface material of the ureilite parent asteroid(s). Electron microprobe analyses of >500 olivine and pyroxene clasts in several polymict ureilites reveal a statistically identical range of compositions to that shown by unbrecciated ureilites, suggesting derivation from a single parent asteroid. Many ureilitic clasts have identical compositions to the anomalously high Mn/Mg olivines and pyroxenes from the Hughes 009 unbrecciated ureilite (here termed the “Hughes cluster”). Some polymict samples also contain lithic clasts derived from oxidized impactors. The presence of several common distinctive lithologies within polymict ureilites is additional evidence that ureilites were derived from a single parent asteroid.In situ oxygen three isotope analyses were made on individual ureilite minerals and lithic clasts, using a secondary ion mass spectrometer (SIMS) with precision typically better than 0.2-0.4‰ (2SD) for δ18O and δ17O. Oxygen isotope ratios of ureilitic clasts fall on a narrow trend along the CCAM line, covering the range for unbrecciated ureilites, and show a good anti-correlation with mineral mg#. SIMS analysis identifies one ferroan lithic clast as an R-chondrite, while a second ferroan clast is unlike any known meteorite. An exotic enstatite grain is derived from an enstatite chondrite or aubrite, and another pyroxene grain with Δ17O of −0.4 ± 0.2‰ is unrelated to any known meteorite type.Ureilitic olivine clasts with mg#s < 85 are much more common than those with mg# > 85 which include the melt-inclusion-bearing “Hughes cluster” ureilites. Thus melt was present in regions of the parent ureilite asteroid with a bulk mg# > 85 when the asteroid was disrupted by impact, giving rise to two types of ureilites: common ferroan ones that were residual after melting and less common magnesian ones that were still partially molten when disruption occurred. One or more daughter asteroids re-accreted from the remnants of the mantle of the proto-ureilite asteroid. Polymict ureilite meteorites represent regolith that subsequently formed on the surface of a daughter asteroid, including impact-derived material from at least six different meteoritic sources. 相似文献
3.
The abundances of the highly siderophile elements (HSE) Ru, Pd, Re, Os, Ir, and Pt were determined by isotope dilution mass spectrometry for 22 ureilite bulk rock samples, including monomict, augite-bearing, and polymict lithologies. This report adds significantly to the quantity of available Pt and Pd abundances in ureilites, as these elements were rarely determined in previous neutron activation studies. The CI-normalized HSE abundance patterns of all ureilites analyzed here except ALHA 81101 show marked depletions in the more volatile Pd, with CI chondrite-normalized Pd/Os ratios (excluding ALHA 81101) averaging 0.19 ± 0.23 (2σ). This value is too low to be directly derived from any known chondrite group. Instead, the HSE bulk rock abundances and HSE interelement ratios in ureilites can be understood as physical mixtures of two end member compositions. One component, best represented by sample ALHA 78019, is characterized by superchondritic abundances of refractory HSE (RHSE—Ru, Re, Os, Ir, and Pt), but subchondritic Pd/RHSE, and is consistent with residual metal after extraction of a S-bearing metallic partial melt from carbonaceous chondrite-like precursor materials. The other component, best represented by sample ALHA 81101, is RHSE-poor and has HSE abundances in chondritic proportions. The genesis of the second component is unclear. It could represent regions within the ureilite parent body (UPB), in which metallic phases were completely molten and partially drained, or it might represent chondritic contamination that was added during disruption and brecciation of the UPB. Removal of carbon-rich melts does not seem to play an important role in ureilite petrogenesis. Removal of such melts would quickly deplete the ureilite precursors in Re/Os and As/Au, which is inconsistent with measured osmium isotope abundances, and also with literature As/Au data for the ureilites. Removal of 26Al during silicate melting may have acted as a switch that turned off further metal extraction from ureilite source regions. 相似文献
4.
Noriko T. Kita Yukio Ikeda Yongzhong Liu Yuichi Morishita 《Geochimica et cosmochimica acta》2004,68(20):4213-4235
Secondary ion mass spectrometer (SIMS) oxygen isotope analyses were performed on 24 clasts, representing 9 clast types, in the Dar al Gani (DaG) 319 polymict ureilite with precisions better than 1‰. Olivine-rich clasts with typical ureilitic textures and mineral compositions have oxygen isotopic compositions that are identical to those of the monomict ureilites and plot along the CCAM (Carbonaceous Chondrite Anhydrous Mineral) line. Other igneous clasts, including plagioclase-bearing clasts, also plot along the CCAM line, indicating that they were derived from the ureilite parent body (UPB). Thus, we suggest that some of the plagioclase-bearing clasts in the polymict ureilites represent the “missing basaltic component” produced by partial melting on the UPB.Trace element concentrations (Mg, K, Sc, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Rb, Sr and Ba) in ureilitic plagioclase and glass from 13 clasts were obtained by using the SIMS high mass resolution method. The trace element contents of the plagioclase generally show monotonic variations with anorthite content (mol%) that are consistent with partial melting and fractional crystallization. Incompatible trace element concentrations (K, Ti, and Ba) are low and variable for plagioclase with An > 40, indicating that the parental magmas for some clasts were derived from a depleted source. We performed partial melt modeling for CI and CM precursor compositions and compared the results to the observed trace element (K, Ba, and Sr) abundances in the plagioclase. Our results indicate that (1) the UPB evolved from a alkali-rich carbonaceous chondritic precursor, (2) parent melts of porphyritic clasts could have formed by 5-20% equilibrium partial melting and subsequent fractional crystallization, and (3) parent melts of the incompatible trace element-depleted clasts could be derived from fractional melting, where low degree (<10%) partial melts were repeatedly extracted from their solid sources.Thus, both the oxygen isotopic and trace element compositions of the plagioclase bearing clasts in DaG-319 suggest that the UPB underwent localized low degree-partial melting events. The partial melts could have been repeatedly extracted from the precursor, resulting in the formation of the olivine-pigeonite monomict ureilites as the final residue. 相似文献
5.
The 187Os/188Os for 22 ureilite whole rock samples, including monomict, augite-bearing, and polymict lithologies, were examined in order to constrain the provenance and subsequent magmatic processing of the ureilite parent body (or bodies). The Re/Os ratios of most ureilites show evidence for a recent disturbance, probably related to Re mobility during weathering, and no meaningful chronological information can be extracted from the present data set. The ureilite 187Os/188Os ratios span a range from 0.11739 to 0.13018, with an average of 0.1258 ± 0.0023 (1σ), similar to typical carbonaceous chondrites, and distinct from ordinary or enstatite chondrites. The similar mean of 187Os/188Os measured for the ureilites and carbonaceous chondrites suggests that the ureilite parent body probably formed within the same region of the solar nebula as carbonaceous chondrites. From the narrow range of the 187Os/188Os distribution in ureilite meteorites it is further concluded that Re was not significantly fractionated from Os during planetary differentiation and was not lost along with the missing ureilitic melt component. The lack of large Re/Os fractionations requires that Re/Os partitioning was controlled by a metal phase, and thus metal had to be stable throughout the interval of magmatic processing on the ureilite parent body. 相似文献
6.
《Chemie der Erde / Geochemistry》2015,75(2):155-183
The howardite, eucrite and diogenite (HED) clan of meteorites are ultramafic and mafic igneous rocks and impact-engendered fragmental debris derived from a thoroughly differentiated asteroid. Earth-based telescopic observation and data returned from vestan orbit by the Dawn spacecraft make a compelling case that the asteroid (4) Vesta is the parent asteroid of HEDs, although this is not universally accepted. Diogenites are petrologically diverse and include dunitic, harzburgitic and noritic lithologic types in addition to the traditional orthopyroxenites. Diogenites form the lower crust of Vesta. Cumulate eucrites are gabbroic rocks formed by accumulation of pigeonite and plagioclase from a mafic magma at depth within the crust, while basaltic eucrites are melt compositions that likely represent shallow-level dikes and sills, and flows. Some basaltic eucrites are richer in incompatible trace elements compared to most eucrites, and these may represent mixed melts contaminated by partial melts of the mafic crust. Differentiation occurred within a few Myr of formation of the earliest solids in the Solar System. Evidence from oxygen isotope compositions and siderophile element contents favor a model of extensive melting of Vesta forming a global magma ocean that rapidly (period of a few Myr) segregated and crystallized to yield a metallic core, olivine-rich mantle, orthopyroxene-rich lower crust and basaltic upper crust. The igneous lithologies were subjected to post-crystallization thermal processing, and most eucrites show textural and mineral-compositional evidence for metamorphism. The cause of this common metamorphism is unclear, but may have resulted from rapid burial of early basalts by later flows caused by high effusion rates on Vesta. The observed surface of Vesta is covered by fragmental debris resulting from impacts, and most HEDs are brecciated. Many eucrites and diogenites are monomict breccias indicating a lack of mixing. However, many HEDs are polymict breccias. Howardites are the most thoroughly mixed polymict breccias, yet only some of them contain evidence for residence in the true regolith. Based on the numbers of meteorites, compositions of howardites, and models of magma ocean solidification, cumulate eucrites and their residual ferroan mafic melts are minor components of the vestan crust. 相似文献
7.
Randy L Korotev Bradley L Jolliff Jeffrey J Gillis 《Geochimica et cosmochimica acta》2003,67(24):4895-4923
We present new compositional data for six feldspathic lunar meteorites, two from cold deserts (Yamato 791197 and 82192) and four from hot deserts (Dhofar 025, Northwest Africa 482, and Dar al Gani 262 and 400). The concentrations of FeO (or Al2O3) and Th (or any other incompatible element) together provide first-order compositional information about lunar polymict samples (breccias and regoliths) and regions of the lunar surface observed from orbit. Concentrations of both elements on the lunar surface have been determined from data acquired by orbiting spacecraft, although the derived concentrations have large uncertainties and some systematic errors compared to sample data. Within the uncertainties and errors in the concentrations derived from orbital data, the distribution of FeO and Th concentrations among lunar meteorites, which represent ∼18 source regions on the lunar surface, is consistent with that of 18 random samples from the surface. Approximately 11 of the lunar meteorites are low-FeO and low-Th breccias, consistent with large regions of the lunar surface, particularly the northern farside highlands. Almost all regoliths from Apollo sites, on the other hand, have larger concentrations of both elements because they contain Fe-rich volcanic lithologies from the nearside maria and Th-rich lithologies from the high-Th anomaly in the northwestern nearside. The feldspathic lunar meteorites thus offer our best estimate of the composition of the surface of the feldspathic highlands, and we provide such an estimate based on the eight most well-characterized feldspathic lunar meteorites. The variable but high (on average) Mg/Fe ratio of the feldspathic lunar meteorites compared to ferroan anorthosites confirms a hypothesis that much of the plagioclase at the surface of the feldspathic highlands is associated with high-Mg/Fe feldspathic rocks such as magnesian granulitic breccia, not ferroan anorthosite. Geochemically, the high-Mg/Fe breccias appear to be unrelated to the mafic magnesian-suite rocks of the Apollo collection. Models for the formation of the upper lunar crust as a simple flotation cumulate composed mainly of ferroan anorthosite do not account for the complexity of the crust as inferred from the feldspathic lunar meteorites. 相似文献
8.
This experimental study explores the petrogenesis of ureilites by a partial melting/smelting process. Experiments have been performed over temperature (1150-1280 °C), pressure (5-12.5 MPa), and low oxygen fugacity (graphite-CO gas) conditions appropriate for a hypothetical ureilite parent body ∼200 km in size. Experimental and modeling results indicate that a partial melting/smelting model of ureilite petrogenesis can explain many of the unique characteristics displayed by this meteorite group. Compositional information preserved in the pigeonite-olivine ureilites was used to estimate the composition of melts in equilibrium with the ureilites. The results of 20 experiments saturated with olivine, pyroxene, metal, and liquid with appropriate ureilite compositions are used to calibrate the phase coefficients and pressure-temperature dependence of the smelting reaction. The calibrated coefficients are used to model the behavior of a hypothetical residue that is experiencing fractional smelting. The residue is initially olivine-rich and smelting progressively depletes the olivine content and enriches the pyroxene and metal contents of the residues. The modeled residue composition at 1260 °C best reproduces the trend of ureilite bulk compositions. The model results also indicate that as a ureilite residue undergoes isothermal decompression smelting over a range of temperatures, Ca/Al values and Cr2O3 contents are enriched at lower temperatures (below ∼1240 °C) and tend to decrease at higher temperatures. Therefore, fractional smelting can account for the high Ca/Al and Cr2O3 wt% values observed in ureilites. We propose that ureilites were generated from an olivine-rich, cpx-bearing residue. Smelting began when the residue was partially melted and contained liquid, olivine, and carbon. These residues experienced varying degrees of fractional smelting to produce the compositional variability observed within the pigeonite-bearing ureilites. Variations in mineral composition, modal proportions, and isotopic signatures are best described by heterogeneous accretion of the ureilite parent body followed by minimal and variable degrees of igneous processing. 相似文献
9.
A characteristic feature of ureilite meteorites is reduction of FeO. But the reduction is usually confined to the rims of olivine. In the LAR 04315, LAP 03587 and Almahata Sitta ureilites, pyroxene was extensively reduced by impact smelting. In LAR 04315, the impact caused nearly all of the original pigeonite to melt or otherwise become sufficiently structurally compromised to allow smelting, and yet a minor proportion of the pyroxene escaped smelting and survived with its original composition (En74.1Wo10.2). Olivine mosaicism confirms that LAR 04315 experienced a major shock event. The smelted pyroxenes also show a distinctive patchiness in their interference colors (although each grain’s basic optical continuity, often including twinning, is still discernible). They also have reduced compositions, are ubiquitously porous (∼15%), and contain sprinklings of Fe-metal and felsic glass. For the most part the olivine underwent only very slight reduction. Much of the (small) pyroxene component of LAP 03587 shows the same oddly porous texture. LAR 04315 also contains large traces of silica and felsic glass (with a typical composition of, in wt%, 61 SiO2, 23 Al2O3, 11 CaO, 3.7 Na2O) glass; these two phases together form selvages that line the walls of many of the largest voids in the rock. Silica is a by-product of pyroxene smelting. The felsic glass probably derives largely from interstitial basaltic melt that predated the impact. However, the comparatively stiff surrounding/included silica may have promoted unusually high melt retention within LAR 04315 through the smelting episode (one aspect of which was a major stream-out, through the same large voids, of COx gas). The impact-smelted pyroxene of LAP 03587 is enigmatic because this ureilite also features little-shocked euhedral graphite laths and no olivine mosaicism. The fine-grained ureilitic component of Almahata Sitta appears to have likewise formed by impact smelting, but with more extensive melting of pyroxene (especially a Ca-rich pyroxene component), more pulverization and melting of olivine, and more displacement of both. However, in places the original coarse-equant ureilite texture is still discernible in relict form. Ordinarily, an impact shock melts olivine before, or at least no later than, pyroxene. But in the case of LAR 04315 and LAP 03587, the great shock event evidently occurred when the material was already anatectic or very nearly so; and thus the difference in melting temperature between pyroxene and olivine, ∼300 degrees lower for pyroxene, was decisive. If literature inferences of extremely fast cooling rates, implying shallow burial depths, are accurate, the proportion of COx gas generated by ureilite smelting exceeded by a very large factor (of order 103 but possibly much greater) the volume represented as porosity in the final ureilites. The outflow of so much gas may have, by near-surface explosive expansion and jetting, enhanced the thoroughness of the impact-triggered catastrophic impact disruption of the parent asteroid. 相似文献
10.
Robert N. Clayton Toshiko K. Mayeda Naoki Onuma John Shearer 《Geochimica et cosmochimica acta》1976,40(12):1475-1476
The δ18O and δ17O values of olivine from Kenna are 7.6 and 3.0%, respectively, relative to SMOW. These values are typical of ureilites which form a unique group on a δ17O -δ18O graph. The ureilites are related to, but not directly derived from, the anhydrous phases of C2 and C3 meteorites. The 18O/16O fractionation between pyroxene and olivine is 0.60, indicating a temperature of last equilibration of 1000 ± 100°C. 相似文献
11.
《Geochimica et cosmochimica acta》1986,50(1):107-110
The Fe/Mn-Fe/Mg relations of published microprobe analyses of ureilite olivine cores suggest that FeO reduction in the magmatic stage was important in the genesis of some of these meteorites. Consideration of Mg/Mn and Fe/Mn partitioning between olivine and pigeonite cores shows that these two phases are not in equilibrium. The data are consistent with combined fractional crystallization and FeO reduction being the major processes of ureilite genesis. Few, if any, of the analyzed ureilites are consistent with a partial melting residue model. 相似文献
12.
We investigate petrologic and physical aspects of melt extraction on the parent asteroid of the ureilite meteorites (UPB). We first develop a petrologic model for simultaneous melting and smelting (reduction of FeO by C) at various depths. For a model starting composition, determined from petrologic constraints to have been CV-like except for elevated Ca/Al (2.5 × CI), we determine (1) degree of melting, (2) the evolution of mg, (3) production of CO + CO2 gas and (4) the evolution of mineralogy in the residue as a function of temperature and pressure. We then use these relationships to examine implications of fractional vs. batch melt extraction.In the shallowest source regions (∼30 bars), melting and smelting begin simultaneously at ∼1050 °C, so that mg and the abundance of low-Ca pyroxene (initially pigeonite, ultimately pigeonite + orthopyroxene) begin to increase immediately. However, in the deepest source regions (∼100 bars), smelting does not begin until ∼1200 °C, so that mg begins to increase and low-Ca pyroxene (pigeonite) appears only after ∼21% melting. The final residues in these two cases, obtained just after the demise of augite, match the end-members of the ureilite mg range (∼94-76) in pyroxene abundance and type. In all source regions, production of CO + CO2 by smelting varies over the course of melting. The onset of smelting results in a burst of gas production and very high incremental gas/melt ratios (up to ∼2.5 by mass); after a few % (s)melting, however, these values drastically decline (to <0.05 in the final increments).Physical modelling based on these relationships indicates that melts would begin to migrate upwards after only ∼1-2% melting, and thereafter would migrate continuously (fractionally) and rapidly (reaching the surface in < a year) in a network of veins/dikes. All melts produced during the smelting stage in each source region have gas contents sufficient to cause them to erupt explosively and be lost. However, since in all but the shallowest source regions part of the melting sequence occurs without smelting, fractional melting implies that a significant fraction of UPB melts may have erupted more placidly to form a thin crust (∼3.3 km thick for a 100 km radius body).Our calculations suggest that melt extraction was so rapid that equilibrium trace element partitioning may not have been attained. We present a model for disequilibrium fractional melting (in which REE partitioning is limited by diffusion) on the UPB, and demonstrate that it produces a good match to the ureilite data. The disequilibrium model may also apply to trace siderophile elements, and might help explain the “overabundance” of these elements in ureilites relative to predictions from the smelting model.Our results suggest that melt extraction on the UPB was a rapid, fractional process, which can explain the preservation of a primitive oxygen isotopic signature on the UPB. 相似文献
13.
《Chemie der Erde / Geochemistry》2019,79(4):125539
Ureilite meteorites contain iron silicide minerals including suessite (Fe,Ni)3Si, hapkeite (Fe2Si) and xifengite (Fe5Si3). Despite occurring mostly in brecciated varieties presumed to be derived from the regolith of the ureilite parent asteroid, suessite has also been confirmed in one lithology of a dimict ureilite (NWA 1241). In contrast, Si-bearing Fe-metals occur in both brecciated and unbrecciated ureilites, implying that they were formed throughout the ureilite parent asteroid. We examined major, minor and trace element data of Fe-metals in seven brecciated ureilites (DaG 319, DaG 999, DaG 1000, DaG 1023, DaG 1047, EET 83309, and EET 87720) in addition to the dimict ureilite NWA 1241.In this study we show that the silicides and Si-bearing metals in ureilites have similar siderophile trace element patterns; therefore, the precursors to the silicides were indigenous to the ureilite parent body. Si-free kamacite grains in brecciated ureilites show flatter, more chondritic siderophile element patterns. They may also be derived from the interior of the ureilite parent body, but some may be of exogenous origin (impactor debris), as are rare taenite grains.On Earth, iron silicides are often formed under high-temperature and strongly reducing conditions (e.g. blast furnaces, lightning strikes). On the Moon, hapkeite (Fe2Si) and other silicides have been found in the regolith where they were formed by impact-induced space weathering. In the Stardust aerogel, iron silicides derived from comet Wild2 were also formed by an impact-related reduction process. Silicides in ureilite regolith breccias may have formed by similar processes but ureilites additionally contain abundant elemental carbon which probably acted as a reducing agent, thus larger and more abundant silicide grains were formed than in the lunar regolith or cometary material. The origin of suessite in NWA 1241 may be analogous to that of reduced lithologies in the terrestrial mantle, although a regolith origin may also be possible since this sample is shown here to be a dimict breccia. 相似文献
14.
We develop a physical model of the thermal history of the ureilite parent body (UPB) that numerically tracks the history of its heating, hydration, dehydration, partial melting and smelting as a function of its formation time and the initial values of its composition, formation temperature and water ice content. Petrologic and chemical data from the main group (non-polymict) ureilite meteorites, which sample the interior of the UPB between depths corresponding to pressures in the range 3-10 MPa, are used to constrain the model. We find that to achieve the ∼30% melting inferred for ureilites from all sampled depths, the UPB must have had a radius between ∼80 and ∼130 km and must have accreted about 0.55 Ma after CAI formation. Melting began in the body at ∼1 Ma after CAI, and the time at which 30% melting was reached varied with depth in the asteroid but was always between ∼4.5 and ∼5.8 Ma after CAI. The total rate at which melt was produced in the UPB varied from more than 100 m3 s−1 in the very early stages of melting at ∼1 Ma after CAI to ∼5 m3 s−1 between 2 and 3 Ma after CAI, decreasing to extremely small values as the end of melting was approached beyond ∼5 Ma. Although the initial period of high melt production occupied only a short time around 1 Ma after CAI, it corresponded to ∼half (16%) of total silicate melting, and all strictly basaltic (i.e. plagioclase-saturated) melts must have been produced during this period.A very efficient melt transport network, consisting of a hierarchy of veins and larger pathways (dikes), developed quickly at the start of melting, ensuring rapid (timescales of months) transport of any single parcel of melt to shallow levels, thus ensuring that chemical interaction between melts and the rocks through which they subsequently passed was negligible. Volatile (mainly carbon monoxide) production due to smelting began at the start of silicate melting in the shallowest parts of the UPB and at later times at greater depths. Except at the very start and very end of melting, the volatile content of the melts produced was always high - generally between 15 and 35 mass % - and most of the melt produced was erupted at the surface of the UPB with speeds well in excess of the escape velocity and was lost into space. However, we show that 30% melting at the 3 MPa pressure level was only possible if ∼15% of the total melt produced in the asteroid was retained as a small number (∼5) of very extensive, sill-like intrusions centered at a depth of ∼7 km below the surface, near the base of the ∼8 km thick outer crust of the asteroid that was maintained at temperatures below the basalt solidus by conductive heat loss to the surface. The horizontal extents of these sills occupied about 75% of the surface area of the UPB, and the sills acted as buffers between the steady supply of melt from depth and the intermittent explosive eruption of the melt into space. We infer that samples from these intrusions are preserved as the rare feldspathic (loosely basaltic) clasts in polymict ureilites, and show that the cooling histories of the sills are consistent with these clasts reaching isotopic closure at ∼5 Ma after CAI, as given by 26Al-26Mg, 53Mn-53Cr and Pb-Pb age dates. 相似文献
15.
Jean-Alix Barrat Akira Yamaguchi Claire Bollinger Marcel Bohn 《Geochimica et cosmochimica acta》2010,74(21):6218-6231
The eucrites and diogenites are meteorites that probably originate from asteroid 4-Vesta. The upper part of the crust of this body is certainly composed of eucrites which are basaltic or gabbroic rocks. Diogenites are ultramafic cumulates whose relationships with eucritic lithologies are unknown. Here, we show that the orthopyroxenes of some diogenites display very deep negative Eu anomalies (Eu/Eu∗ close to 0.1 or lower). The contamination of the parental magmas of diogenites by melts derived by partial melting of the eucritic crust can satisfactorily explain the range of the Eu anomalies displayed by diogenites. Thus, these anomalies are the first firm indication that parental melts of diogenites have intruded the eucritic crust, and consequently are younger than eucrites. 相似文献
16.
17.
Abundances and isotopic compositions of nitrogen and argon have been investigated in bulk samples as well as in acid-resistant C-rich residues of a suite of ureilites consisting of six monomict (Haverö, Kenna, Lahrauli, ALH81101, ALH82130, LEW85328), three polymict (Nilpena, EET87720, EET83309), and the diamond-free ureilite ALH78019. Nitrogen in bulk ureilites varies from 6.3 ppm (in ALH 78019) to ∼55 ppm (in ALH82130), whereas C-rich acid residues have ∼65 to ∼530 ppm N, showing approximately an order of magnitude enrichment, compared with the bulk ureilites, somewhat less than trapped noble gases. Unlike trapped noble gases that show uniform isotopic composition, nitrogen shows a wide variation in δ15N values within a given ureilite as well as among different ureilites. The variations observed in δ15N among the ureilites studied here suggest the presence of at least five nitrogen components. The characteristics of these five N components and their carrier phases have been identified through their release temperature during pyrolysis and combustion, their association with trapped noble gases, and their carbon (monitored as CO + CO2 generated during combustion). Carrier phases are as follows: 1) Amorphous C, as found in diamond-free ureilite ALH78019, combusting at ≤500°C, with δ15N = -21‰ and accompanied by trapped noble gases. Amorphous C in all diamond-bearing ureilites has evolved from this primary component through almost complete loss of noble gases, but only partial N loss, leading to variable enrichments in 15N. 2) Amorphous C as found in EET83309, with similar release characteristics as component 1, δ15N ≥ 50‰ and associated with trapped noble gases. 3) Graphite, as clearly seen in ALH78019, combusting at ≥700°C, δ15N ≥ 19‰ and devoid of noble gases. 4) Diamond, combusting at 600-800°C, δ15N ≤ -100‰ and accompanied by trapped noble gases. 5) Acid-soluble phases (silicates and metal) as inferred from mass balance are expected to contain a large proportion of nitrogen (18 to 75%) with δ15N in the range -25‰ to 600‰. Each of the ureilites contains at least three N components carried by acid-resistant C phases (amorphous C of type 1 or 2, graphite, and diamond) and one acid-soluble phase in different proportions, resulting in the observed heterogeneity in δ15N. In addition to these five widespread components, EET83309 needs an additional sixth N component carried by a C phase, combusting at <700°C, with δ15N ≥ 153‰ and accompanied by noble gases. It could be either noble gas-bearing graphite or more likely cohenite. Some excursions in the δ15N release patterns of polymict ureilites are suggestive of contributions from foreign clasts that might be present in them.Nitrogen isotopic systematics of EET83309 clearly confirm the absence of diamond in this polymict ureilite, whereas the presence of diamond is clearly indicated for ALH82130. Amorphous C in ALH78019 exhibits close similarities to phase Q of chondrites.The uniform δ15N value of −113 ± 13 ‰ for diamond from both monomict and polymict ureilites and its independence from bulk ureilite δ15N, Δ17O, and %Fo clearly suggest that the occurrence of diamond in ureilites is not a consequence of parent body-related process. The large differences between the δ15N of diamond and other C phases among ureilites do not favor in situ shock conversion of graphite or amorphous C into diamond. A nebular origin for diamond as well as the other C phases is most favored by these data. Also the preservation of the nitrogen isotopic heterogeneity among the carbon phases and the silicates will be more consistent with ureilite formation models akin to “nebular sedimentation” than to “magmatic” type. 相似文献
18.
On October 7, 2008, a small asteroid named 2008 TC3 was detected in space about 19 h prior to its impact on Earth. Numerous world-wide observations of the object while still in space allowed a very precise determination of its impact area: the Nubian Desert of northern Sudan, Africa. The asteroid had a pre-atmospheric diameter of ∼4 m; its weight is reported with values between ∼8 and 83 t, and the bulk density with ∼2–3 g/cm3, translating into a bulk porosity in the range of ∼20–50%. Several dedicated field campaigns in the predicted strewn field resulted in the recovery of more than 700 (monolithological) meteorite fragments with a total weight of ∼10.5 kg. These meteorites were collectively named “Almahata Sitta”, after the nearby train station 6, and initially classified as an anomalous polymict ureilite. Further work, however, showed that Almahata Sitta is not only a ureilite but a complex polymict breccia containing chemically and texturally highly variable meteorite fragments, including different ureilites, a ureilite-related andesite, metal-sulfide assemblages related to ureilites, and various chondrite classes (enstatite, ordinary, carbonaceous, Rumuruti-like). It was shown that that chondrites and ureilites derive from one parent body, i.e., asteroid 2008 TC3, making this object, in combination with the remotely sensed physical parameters, a loosely aggregated, rubble-pile-like object. Detailed examinations have been conducted and mineral-chemical data for 110 samples have been collected, but more work on the remaining samples is mandatory. 相似文献
19.
Fossil particle tracks and spallation-produced He and Ne in the Kenna ureilite indicate that it existed in space as a small object for 23 m.y. In our study of Kenna, we found no evidence of trapped He or Ne. Large amounts of heavy rare gases occur in Kenna in concentrations typical of ureilites. In a step-wise release of gases, the isotopic compositions of Kr and Xe were found to be constant above 600°C, revealing the presence of a single retentively sited component. The Xe isotopic abundances are characterized by 124:126:128:129:130:131:132:134:136 = 0.471:0.414:8.280:103.61: 16.296:81.92:100:37.70:31.23. This isotopic composition is distinct from AVCC (average carbonaceous chondritic), but similar to compositions known for some time in certain temperature fractions of Renazzo, Murray and Murchison. Kenna-type Xe appears to be one of the several components found in carbonaceous chondrites.
Binz et al. (Geochim. Cosmochim. Acta 39, 1576–1579, 1975) have recently found that many volatile trace elements are strongly depleted in ureilites. Thus, the relatively large amounts of heavy rare gases present in ureilites did not result from a mixture of a volatile-rich component with the ureilite host. It appears that some material rich in carbon and heavy rare gases was incorporated into a differentiated ureilite host. All current hypotheses which purport to explain the origin of trapped gases in meteorites encounter difficulty in accounting for trapped gases in ureilites in a straightforward manner. 相似文献
20.
《Chemie der Erde / Geochemistry》2015,75(1):1-28
Enstatite-rich meteorites include EH and EL chondrites, rare ungrouped enstatite chondrites, aubrites, a few metal-rich meteorites (possibly derived from the mantle of the aubrite parent body), various impact-melt breccias and impact-melt rocks, and a few samples that may be partial-melt residues ultimately derived from enstatite chondrites. Members of these sets of rocks exhibit a wide range of impact features including mineral-lattice deformation, whole-rock brecciation, petrofabrics, opaque veins, rare high-pressure phases, silicate darkening, silicate-rich melt veins and melt pockets, shock-produced diamonds, euhedral enstatite grains, nucleation of enstatite on relict grains and chondrules, low MnO in enstatite, high Mn in troilite and oldhamite, grains of keilite, abundant silica, euhedral graphite, euhedral sinoite, F-rich amphibole and mica, and impact-melt globules and spherules. No single meteorite possesses all of these features, although many possess several. Impacts can also cause bulk REE fractionations due to melting and loss of oldhamite (CaS) – the main REE carrier in enstatite meteorites. The Shallowater aubrite can be modeled as an impact-melt rock derived from a large cratering event on a porous enstatite chondritic asteroid; it may have been shock melted at depth, slowly cooled and then excavated and quenched. Mount Egerton may share a broadly similar shock and thermal history; it could be from the same parent body as Shallowater. Many aubrites contain large pyroxene grains that exhibit weak mosaic extinction, consistent with shock-stage S4; in contrast, small olivine grains in some of these same aubrites have sharp or undulose extinction, consistent with shock stage S1 to S2. Because elemental diffusion is much faster in olivine than pyroxene, it seems likely that these aubrites experienced mild post-shock annealing, perhaps due to relatively shallow burial after an energetic impact event. There are correlations among EH and EL chondrites between petrologic type and the degree of shock, consistent with the hypothesis that collisional heating is mainly responsible for enstatite-chondrite thermal metamorphism. Nevertheless, the apparent shock stages of EL6 and EH6 chondrites tend to be lower than EL3-5 and EH3-5 chondrites, suggesting that the type-6 enstatite chondrites (many of which possess impact-produced features) were shocked and annealed. The relatively young Ar–Ar ages of enstatite chondrites record heating events that occurred long after any 26Al that may have been present initially had decayed away. Impacts remain the only plausible heat source at these late dates. Some enstatite meteorites accreted to other celestial bodies: Hadley Rille (EH) was partly melted when it struck the Moon; Galim (b), also an EH chondrite, was shocked and partly oxidized when it accreted to the LL parent asteroid. EH, EL and aubrite-like clasts also occur in the polymict breccias Kaidun (a carbonaceous chondrite) and Almahata Sitta (an anomalous ureilite). The EH and EL clasts in Kaidun appear unshocked; some clasts in Almahata Sitta may have been extensively shocked on their parent bodies prior to being incorporated into the Almahata Sitta host. 相似文献