Seasonal snowpack dynamics and runoff in a cool temperate forest: lysimeter experiment in Niigata,Japan

Seasonal snowpack dynamics are described through field measurements under contrasting canopy conditions for a mountainous catchment in the Japan Sea region. Microclimatic data, snow accumulation, albedo and lysimeter runoff are given through the complete winter season 2002–03 in (1) a mature cedar stand, (2) a larch stand, and (3) a regenerating cedar stand or opening. The accumulation and melt of seasonal snowpack strongly influences streamflow runoff during December to May, including winter baseflow, mid‐winter melt, rain on snow, and diurnal peaks driven by radiation melt in spring. Lysimeter runoff at all sites is characterized by constant ground melt of 0·8–1·0 mm day⁻¹. Rapid response to mid‐winter melt or rainfall shows that the snowpack remains in a ripe or near‐ripe condition throughout the snow‐cover season. Hourly and daily lysimeter discharge was greatest during rain on snow (e.g. 7 mm h⁻¹ and 53 mm day⁻¹ on 17 December) with the majority of runoff due to rainfall passing through the snowpack as opposed to snowmelt. For both rain‐on‐snow and radiation melt events lysimeter discharge was generally greatest at the open site, although there were exceptions such as during interception melt events. During radiation melt instantaneous discharge was up to 4·0 times greater in the opening compared with the mature cedar, and 48 h discharge was up to 2·5 times greater. Perhaps characteristic of maritime climates, forest interception melt is shown to be important in addition to sublimation in reducing snow accumulation beneath dense canopies. While sublimation represents a loss from the catchment water balance, interception melt percolates through the snowpack and contributes to soil moisture during the winter season. Strong differences in microclimate and snowpack albedo persisted between cedar, larch and open sites, and it is suggested further work is needed to account for this in hydrological simulation models. Copyright © 2005 John Wiley & Sons, Ltd.     

Sublimation from thin snow cover at the edge of the Eurasian cryosphere in Mongolia

Sublimation from thin snow cover at the edge of the Eurasian cryosphere in Mongolia was calculated using the aerodynamic profile method and verified by eddy covariance observations using multiple‐level meteorological data from three sites representing a variety of geographic and vegetative conditions in Mongolia. Data were collected in the winter and analysed from three sites. Intense sublimation events, defined by daily sublimation levels of more than 0·4 mm, were predominant in their effect on the temporal variability of sublimation. The dominant meteorological elements affecting sublimation were wind speed and air temperature, with the latter affecting sublimation indirectly through the vapour deficit. Seasonal and interannual variations in sublimation were investigated using long‐interval estimations for 19 years at a mountainous‐area meteorological station and for 24 years at a flat‐plain meteorological station. The general seasonal pattern indicated higher rates of sublimation in both the beginning and ending of the snow‐covered period, when the wind speed and vapour deficit were higher. Annual sublimation averaged 11·7 mm at the flat‐plain meteorological station, or 20·3% of the annual snowfall, and 15·7 mm at the site in the mountains, or 21·6% of snowfall. The sum of snow sublimation and snowmelt evaporation represented 17 to 20% of annual evapotranspiration in a couple observation years. Copyright © 2008 John Wiley & Sons, Ltd.     

Estimating sublimation of intercepted and sub‐canopy snow using eddy covariance systems

Direct measurements of winter water loss due to sublimation were made in a sub‐alpine forest in the Rocky Mountains of Colorado. Above‐and below‐canopy eddy covariance systems indicated substantial losses of winter‐season snow accumulation in the form of snowpack (0·41 mm d^?1) and intercepted snow (0·71 mm d^?1) sublimation. The partitioning between these over and under story components of water loss was highly dependent on atmospheric conditions and near‐surface conditions at and below the snow/atmosphere interface. High above‐canopy sensible heat fluxes lead to strong temperature gradients between vegetation and the snow‐surface, driving substantial specific humidity gradients at the snow surface and high sublimation rates. Intercepted snowfall resulted in rapid response of above‐canopy latent heat fluxes, high within‐canopy sublimation rates (maximum = 3·7 mm d^?1), and diminished sub‐canopy snowpack sublimation. These results indicate that sublimation losses from the sub‐canopy snowpack are strongly dependent on the partitioning of sensible and latent heat fluxes in the canopy. This compels comprehensive studies of snow sublimation in forested regions that integrate sub‐canopy and over‐story processes. Copyright © 2007 John Wiley & Sons, Ltd.     

Sensitivity of model parameterizations for simulated latent heat flux at the snow surface for complex mountain sites

The snowcover energy balance is typically dominated by net radiation and sensible and latent heat fluxes. Validation of the two latter components is rare and often difficult to undertake at complex mountain sites. Latent heat flux, the focus of this paper, is the primary coupling mechanism between the snow surface and the atmosphere. It accounts for the critical exchange of mass (sublimation or condensation), along with the associated snowcover energy loss or gain. Measured and modelled latent heat fluxes at a wind‐exposed and wind‐sheltered site were compared to evaluate variability in model parameters. A well‐tested and well‐validated snowcover energy balance model, Snobal, was selected for this comparison because of previously successful applications of the model at these sites and because of the adjustability of the parameters specific to latent heat transfer within the model. Simulated latent heat flux and snow water equivalent (SWE) were not sensitive to different formulations of the stability profile functions associated with heat transfer calculations. The model parameters of snow surface roughness length and active snow layer thickness were used to improve latent heat flux simulations while retaining accuracy in the simulation of the SWE at an exposed and sheltered study site. Optimal parameters for simulated latent heat flux and SWE were found at the exposed site with a shorter roughness length and thicker active layer, and at the sheltered site with a longer roughness length and thinner active layer. These findings were linked to physical characteristics of the study sites and will allow for adoption into other snow models that use similar parameters. Physical characteristics of wind exposure and cover could also be used to distribute critical parameters in a spatially distributed modelling domain and aid in parameter selection for application to other watersheds where detailed information is not available. Copyright © 2012 John Wiley & Sons, Ltd.     

Comparison of methods for quantifying surface sublimation over seasonally snow‐covered terrain

Snow sublimation can be an important component of the snow‐cover mass balance, and there is considerable interest in quantifying the role of this process within the water and energy balance of snow‐covered regions. In recent years, robust eddy covariance (EC) instrumentation has been used to quantify snow sublimation over snow‐covered surfaces in complex mountainous terrain. However, EC can be challenging for monitoring turbulent fluxes in snow‐covered environments because of intensive data, power, and fetch requirements, and alternative methods of estimating snow sublimation are often relied upon. To evaluate the relative merits of methods for quantifying surface sublimation, fluxes calculated by the EC, Bowen ratio–energy balance (BR), bulk aerodynamic flux (BF), and aerodynamic profile (AP) methods and their associated uncertainty were compared at two forested openings in the Colorado Rocky Mountains. Biases between methods are evaluated over a range of environmental conditions, and limitations of each method are discussed. Mean surface sublimation rates from both sites ranged from 0.33 to 0.36 mm day^?1, 0.14 to 0.37 mm day^?1, 0.10 to 0.17 mm day^?1, and 0.03 to 0.10 mm day^?1 for the EC, BR, BF and AP methods, respectively. The EC and/or BF methods are concluded to be superior for estimating surface sublimation in snow‐covered forested openings. The surface sublimation rates quantified in this study are generally smaller in magnitude compared with previously published studies in this region and help to refine sublimation estimates for forested openings in the Colorado Rocky Mountains. Copyright © 2016 John Wiley & Sons, Ltd.     

Application of a distributed blowing snow model to the Arctic

Transportation, sublimation and accumulation of snow dominate snow cover development in the Arctic and produce episodic high evaporative fluxes. Unfortunately, blowing snow processes are not presently incorporated in any hydrological or meteorological models. To demonstrate the application of simple algorithms that represent blowing snow processes, monthly snow accumulation, relocation and sublimation fluxes were calculated and applied in a spatially distributed manner to a 68-km² catchment in the low Arctic of north-western Canada. The model uses a Landsat-derived vegetation classification and a digital elevation model to segregate the basin into snow ‘sources’ and ‘sinks’. The model then relocates snow from sources to sinks and calculates in-transit sublimation loss. The resulting annual snow accumulation in specific landscape types was compared with the result of intensive surveys of snow depth and density. On an annual basis, 28% of annual snowfall sublimated from tundra surfaces whilst 18% was transported to sink areas. Annual blowing snow transport to sink areas amounted to an additional 16% of annual snowfall to shrub–tundra and an additional 182% to drifts. For the catchment, 19·5% of annual snowfall sublimated from blowing snow, 5·8% was transported into the catchment and 86·5% accumulated on the ground. The model overestimated snow accumulation in the catchment by 6%. The application demonstrates that winter precipitation alone is insufficient to calculate snow accumulation and that blowing snow processes and landscape patterns govern the spatial distribution and total accumulation of snow water equivalent over the winter. These processes can be modelled by relatively simple algorithms, and, when distributed by landscape type over the catchment, produce reasonable estimates of snow accumulation and loss in wind-swept regions. © 1997 John Wiley & Sons, Ltd.     

Data time step to estimate snowpack accumulation at select United States meteorological stations

When estimating the water balance for a cold region watershed, that is one that receive a substantial portion of its annual precipitation as snow, accumulation and other winter hydrological processes must be considered. For many of theses watersheds, all but the most fundamental meteorological data (temperature and precipitation), are either not measured or not measured at a reasonable time step. Of particular importance are wind data, as wind influences underestimates of precipitation due to wind undercatch and losses of snow from the snowpack, specifically, snowpack sublimation, and the occurrence and magnitude of blowing snow. Estimating snow accumulation to yield snowmelt amounts requires summing of gauged precipitation and gauge undercatch, and subtracting minus snowpack sublimation and blowing snow transport. The first two components are computed on a daily time step, while the latter two are computed on an hourly time step. From five National Weather Service meteorological stations (Pullman WA, Rawlins WY, Leadville CO, Rhinelander WI, Syracuse NY), the variations in computed snowpack mass losses minus undercatch using data at different time intervals show that at most sites it is difficult to use monthly time steps for computations derived using hourly or daily data. At the relative dry and cold Leadville, Colorado site the computations were transferable between time steps. Copyright © 2007 John Wiley & Sons, Ltd.     

Sublimation over seasonal snowpack at the southeastern edge of a desert in central Eurasia

The Gurbantonggut Desert, China, is an ideal site for study of sublimation from the snowpack because there are sparse vegetation and simple topography, and the wind speed is not large enough to blow snow into the atmosphere from the snowpack. Daily sublimation was measured by manual snow lysimeters at 8:00, and an automatic weather station was deployed at the top of a stout longitudinal dune chain at the southeastern edge of the desert. It is shown that on a daily scale, there was an extremely significant no‐intercept linear relationship between the measured sublimation and that calculated by the bulk aerodynamic method, although the former was only 83.8% of the latter. It is also demonstrated that ?10°C and 2 m/s were the thresholds where the sublimation varied with the air temperature and the wind speed. When these two thresholds were exceeded, the sublimation accelerated. However, the air temperature and the wind speed at 2 m above the ground averaged ?17.2°C and 1.3 m/s, respectively, and the percentages of the time when the air temperature was below ?10 °C and the wind speed was below 2 m/s were 76.9% and 85.1%, respectively. As a result, the rate of sublimation was quite low most of the time, and the thin snowpack remained in a quasi‐static state until the melt stage started. Copyright © 2011 John Wiley & Sons, Ltd.     

Energy fluxes and melt rate of a seasonal snow cover in the Moroccan High Atlas

ABSTRACT

In this study, we used an energy balance model and two simple methods based on readily available data to identify the processes driving the point-scale energy and mass balance of the snowpack. Data were provided from an experimental site located at 3200 m. All models were evaluated by comparing observed and modelled snow water equivalents. Performances are variable from one season to the next and the energy balance model gives better results (mean of root mean square error, RMSE = 25 mm and r² = 0.90) than the two simplified approaches (mean of RMSE = 54 mm and r² = 0.70). There are significant amounts of snow sublimation but they are highly variable from season to season, depending on wind conditions (between 7 and 20% of the total). While the main source of energy for melting is net radiation, the amount of heat brought by sensible heat flux is significant for two of the most windy snow seasons.

Editor Z.W. Kundzewicz Associate editor not assigned     

A precise monitoring of snow surface height in the region of Lambert Glacier basin-Amery Ice Shelf,East Antarctica

The net surface snow accumulation on the Antarctic ice sheet is determined by a combination of precipitation, sublimation and wind redistribution. We present a one-year record of hourly snow-height measurements at LGB69 (70°50'S, 77°04'E, 1850 m a.s.l.). east side of Lambert Glacier basin (LGB), and 4 year record at G3 (70°53'S, 69°52'E, 84 m a.s.l.), Amery Ice Shelf (AIS). The measurements were made with ultrasonic sensors mounted on automatic weather stations installed at two sites. The snow accumulation at LGB69 is approximately 70 cm. Throughout the winter, between April and September, there was little change in surface snow height (SSH) at the two sites. The negative SSH change is due to densification at LGB69, and is due to both ablation and densification at G3. The strongest accumulation at two sites occurred during the period between October and March (accounting for 101.6% at LGB69), with four episodic increasing events occurring during 2002 for LGB69, and eight events during 1999-2002 for G     

Snow-distribution and melt modelling for glaciers in Zackenberg river drainage basin,north-eastern Greenland

A physically based snow-evolution modelling system (SnowModel) that includes four sub-models: MicroMet, EnBal, SnowPack, and SnowTran-3D, was used to simulate eight full-year evolutions of snow accumulation, distribution, sublimation, and surface melt from glaciers in the Zackenberg river drainage basin, in north-east Greenland. Meteorological observations from two meteorological stations were used as model inputs, and spatial snow depth observations, snow melt depletion curves from photographic time lapse, and a satellite image were used for model testing of snow and melt simulations, which differ from previous SnowModel tests methods used on Greenland glaciers. Modelled test-period-average end-of-winter snow water equivalent (SWE) depth for the depletion area differs by a maximum of 14 mm w.eq., or ∼6%, more than the observed, and modelled test-period-average snow cover extent differs by a maximum of 5%, or 0·8 km², less than the observed. Furthermore, comparison with a satellite image indicated a 7% discrepancy between observed and modelled snow cover extent for the entire drainage basin. About 18% (31 mm w.eq.) of the solid precipitation was returned to the atmosphere by sublimation. Modelled mean annual snow melt and glacier ice melt for the glaciers in the Zackenberg river drainage basin from 1997 through 2005 (September–August) averaged 207 mm w.eq. year⁻¹ and 1198 mm w.eq. year⁻¹, respectively, yielding a total averaging 1405 mm w.eq. year⁻¹. Total modelled mean annual surface melt varied from 960 mm w.eq. year⁻¹ to 1989 mm w.eq. year⁻¹. The surface-melt period started between mid-May and the beginning of June and lasted until mid-September. Annual calculated runoff averaged 1487 mm w.eq. year⁻¹ (∼150 × 10⁶ m³) (1997–2005) with variations from 1031 mm w.eq. year⁻¹ to 2051 mm w.eq. year⁻¹. The model simulated a total glacier recession averaging − 1347 mm w.eq. year⁻¹ (∼136 × 10⁶ m³) (1997–2005), which was almost equal to previous basin average hydrological water balance storage studies − 244 mm w.eq. year⁻¹ (∼125 × 10⁶ m³) (1997–2003). Copyright © 2007 John Wiley & Sons, Ltd.     

Snow accumulation distribution inferred from time‐lapse photography and simple modelling

The spatial and temporal distribution of snow accumulation is complex and significantly influences the hydrological characteristics of mountain catchments. Many snow redistribution processes, such as avalanching, slushflow or wind drift, are controlled by topography, but their modelling remains challenging. In situ measurements of snow accumulation are laborious and generally have a coarse spatial or temporal resolution. In this respect, time‐lapse photography shows itself as a powerful tool for collecting information at relatively low cost and without the need for direct field access. In this paper, the snow accumulation distribution of an Alpine catchment is inferred by adjusting a simple snow accumulation model combined with a temperature index melt model to match the modelled melt‐out pattern evolution to the pattern monitored during an ablation season through terrestrial oblique photography. The comparison of the resulting end‐of‐winter snow water equivalent distribution with direct measurements shows that the achieved accuracy is comparable with that obtained with an inverse distance interpolation of the point measurements. On average over the ablation season, the observed melt‐out pattern can be reproduced correctly in 93% of the area visible from the fixed camera. The relations between inferred snow accumulation distribution and topographic variables indicate large scatter. However, a significant correlation with local slope is found and terrain curvature is detected as a factor limiting the maximal snow accumulation. Copyright © 2010 John Wiley & Sons, Ltd.     

Snowfall interception in a deciduous Nothofagus forest and implications for spatial snowpack distribution

Native Nothofagus forests in the midlatitude region of the Andes Cordillera are notorious biodiversity hot spots, uniquely situated in the Southern Hemisphere such that they develop in snow‐dominated reaches of this mountain range. Spanning a smaller surface area than similar ecosystems, where forests and snow coexist in the Northern Hemisphere, the interaction between vegetation and snow processes in this ecotone has received lesser attention. We present the first systematic study of snow–vegetation interactions in the Nothofagus forests of the Southern Andes, focusing on how the interplay between interception and climate determines patterns of snow water equivalent (SWE) variability. The Valle Hermoso experimental catchment, located in the Nevados de Chillán vicinity, was fitted with eight snow depth sensors that provided continuous measurements at varying elevations, aspect, and forest cover. Also, manual measurements of snow properties were obtained during snow surveys conducted during end of winter and spring seasons for 3 years, between 2015 and 2017. Each year was characterized by distinct climatological conditions, with 2016 representing one of the driest winters on record in this region. Distance to canopy, leaf area index, and total gap area were measured at each observational site. A regression model was built on the basis of statistical analysis of local parameters to model snow interception in this kind of forest. We find that interception implied a 23.2% reduction in snow accumulation in forested sites compared with clearings. The interception in these deciduous trees represents, on average, 23.6% of total annual snowfall, reaching a maximum measured interception value of 13.8‐mm SWE for all snowfall events analysed in this research.     

Snowmelt energetics at a shrub tundra site in the western Canadian Arctic

Snow accumulation and melt were observed at shrub tundra and tundra sites in the western Canadian Arctic. End of winter snow water equivalent (SWE) was higher at the shrub tundra site than the tundra site, but lower than total winter snowfall because snow was removed by blowing snow, and a component was also lost to sublimation. Removal of snow from the shrub site was larger than expected because the shrubs were bent over and covered by snow during much of the winter. Although SWE was higher at the shrub site, the snow disappeared at a similar time at both sites, suggesting enhanced melt at the shrub site. The Canadian Land Surface Scheme (CLASS) was used to explore the processes controlling this enhanced melt. The spring‐up of the shrubs during melt had a large effect on snowmelt energetics, with similar turbulent fluxes and radiation above the canopy at both sites before shrub emergence and after the snowmelt. However, when the shrubs were emerging, conditions were considerably different at the two sites. Above the shrub canopy, outgoing shortwave radiation was reduced, outgoing longwave radiation was increased, sensible heat flux was increased and latent flux was similar to that at the tundra site. Above the snow surface at this site, incoming shortwave radiation was reduced, incoming longwave radiation was increased and sensible heat flux was decreased. These differences were caused by the lower albedo of the shrubs, shading of the snow, increased longwave emission by the shrub stems and decreased wind speed below the shrub canopy. The overall result was increased snowmelt at the shrub site. Although this article details the impact of shrubs on snow accumulation and melt, and energy exchanges, additional research is required to consider the effect of shrub proliferation on both regional hydrology and climate. Copyright 2010 John Wiley & Sons Ltd and Crown in the right of Canada.     

Validation of spatial variability of snowpack thickness and density obtained with GPR and TDR methods

We evaluate the reliability of the joint use of Ground Penetrating Radar (GPR) and Time Domain Reflectometry (TDR) to map dry snow depth, layering, and density where the snowpack thickness is highly irregular and the use of classical survey methods (i.e., hand probes and snow sampling) is unsustainable.We choose a test site characterised by irregular ground morphology, slope, and intense wind action (about 3000 m a.s.l., Western Alps, northern Italy) in dry snow conditions and with a snow-depth ranging from 0.3 m to 3 m over a few tens of metres over the course of a season.The combined use of TDR and high-frequency GPR (at a nominal frequency of 900 MHz) allows for rapid high-resolution imaging of the snowpack. While the GPR data show the interface between the snowpack and the ground, the snow layering, and the presence of snow crusts, the TDR survey allows the local calibration of wave speed based on GPR measurements and the estimation of layer densities. From January to April, there was a slight increase in the average wave speed from 0.22 to 0.24 m/ns from the accumulation zone to the eroded zone. The values are consistent with density values in the range of 350–450 kg/m³, with peaks of 600 kg/m³, as gravimetrically measured from samples from snow pits at different times. The conversion of the electromagnetic wave speed into density agrees with the core samples, with an estimated uncertainty of about 10%.     

Variable effects of forest canopies on snow processes in a valley of the central Spanish Pyrenees

Snowpacks and forests have complex interactions throughout the large range of altitudes where they co-occur. However, there are no reliable data on the spatial and temporal interactions of forests with snowpacks, such as those that occur in nearby areas that have different environmental conditions and those that occur during different snow seasons. This study monitored the interactions of forests with snowpacks in four forest stands in a single valley of the central Spanish Pyrenees during three consecutive snow seasons (2015/2016, 2016/2017 and 2017/2018). Daily snow depth data from time-lapse cameras were compared with snow data from field surveys that were performed every 10–15 days. These data thus provided information on the spatial and temporal changes of snow–water equivalent (SWE). The results indicated that forest had the same general effects on snowpack in each forest stand and during each snow season. On average, forest cover reduced the duration of snowpack by 17 days, reduced the cumulative SWE of the snowpack by about 60% and increased the spatial heterogeneity of snowpack by 190%. Overall, forest cover reduced SWE total accumulation by 40% and the rate of SWE accumulation by 25%. The forest-mediated reduction of the accumulation rate, in combination with the occasional forest-mediated enhancement of melting rate, explained the reduced duration of snowpacks beneath forest canopies. However, the magnitude and timing of certain forest effects on snowpack had significant spatial and temporal variations. This variability must be considered when selecting the location of an experimental site in a mountainous area, because the study site should be representative of surrounding areas. The same considerations apply when selecting a time period for study.     

Impact of land-use changes on snow in a forested region with heavy snowfall in Hokkaido,Japan

Abstract

We simulated snow processes in a forested region with heavy snowfall in Japan, and evaluated both the regional-scale snow distribution and the potential impact of land-use changes on the snow cover and water balances over the entire domain. SnowModel reproduced the snow processes at open and forested sites, which were confirmed by snow water equivalent (SWE) measurements at two intensive observation sites and snow depth measurements at the Automated Meteorological Data Acquisition System sites. SnowModel also reproduced the observed snow distribution (from the MODIS snow cover data) over the simulation domain during thaw. The observed SWE was less at the forested site than at the open site. The SnowModel simulations showed that this difference was caused mainly by differences in sublimation. The type of land use changed the maximum SWE, onset and duration of snowmelt, and the daily snowmelt rate due to canopy snow interception.

Citation Suzuki, K., Kodama, Y., Nakai, T., Liston, G. E., Yamamoto, K., Ohata, T., Ishii, Y., Sumida, A., Hara, T. & Ohta, T. (2011) Impact of land-use changes in a forested region with heavy snowfall in Hokkaido, Japan. Hydrol. Sci. J. 56(3), 443–467.     

Evaluation of spatial variability in snow water equivalent for a high mountain catchment

Multivariate statistical analysis was used to explore relationships between catchment topography and spatial variability in snow accumulation and melt processes in a small headwater catchment in the Spanish Pyrenees. Manual surveys of snow depth and density provided information on the spatial distribution of snow water equivalent (SWE) and its depletion over the course of the 1997 and 1998 melt seasons. A number of indices expressing the topographic control on snow processes were extracted from a detailed digital elevation model of the catchment. Bivariate screening was used to assess the relative importance of these topographic indices in controlling snow accumulation at the start of the melt season, average melt rates and the timing of snow disappearance. This suggested that topographic controls on the redistribution of snow by wind are the most important influence on snow distribution at the start of the melt season. Furthermore, it appeared that spatial patterns of snow disappearance were largely determined by the distribution of snow water equivalent (SWE) at the start of the melt season, rather than by spatial variability in melt rates during the melt season. Binary regression tree models relating snow depth and disappearance date to terrain indices were then constructed. These explained 70–80% of the variance in the observed data. As well as providing insights into the influence of topography on snow processes, it is suggested that the techniques presented herein could be used in the parameterization of distributed snowmelt models, or in the design of efficient stratified snow surveys. Copyright © 2003 John Wiley & Sons, Ltd.     

MODIS Terra Collection 6 fractional snow cover validation in mountainous terrain during spring snowmelt using Landsat TM and ETM+

Daily swath MODIS Terra Collection 6 fractional snow cover (MOD10_L2) estimates were validated with two‐day Landsat TM/ETM + snow‐covered area estimates across central Idaho and southwestern Montana, USA. Snow cover maps during spring snowmelt for 2000, 2001, 2002, 2003, 2005, 2007, and 2009 were compared between MODIS Terra and Landsat TM/ETM + using least‐squared regression. Strong spatial and temporal map agreement was found between MODIS Terra fractional snow cover and Landsat TM/ETM + snow‐covered area, although map disagreement was observed for two validation dates. High‐altitude cirrus cloud contamination during low snow conditions as well as late season transient snowfall resulted in map disagreement. MODIS Terra's spatial resolution limits retrieval of thin‐patchy snow cover, especially during partially cloudy conditions. Landsat's image acquisition frequency can introduce difficulty when discriminating between transient and resident mountain snow cover. Furthermore, transient snowfall later in the snowmelt season, which is a stochastic accumulation event that does not usually persist beyond the daily timescale, will skew decadal snow‐covered area variability if bi‐monthly climate data record development is the objective. As a quality control step, ground‐based daily snow telemetry snow‐water‐equivalent measurements can be used to verify transient snowfall events. Users of daily MODIS Terra fractional snow products should be aware that local solar illumination and sensor viewing geometry might influence fractional snow cover estimation in mountainous terrain. Cross‐sensor interoperability has been confirmed between MODIS Terra and Landsat TM/ETM + when mapping snow from the visible/infrared spectrum. This relationship is strong and supports operational multi‐sensor snow cover mapping, specifically climate data record development to expand cryosphere, climate, and hydrological science applications. Copyright © 2013 John Wiley & Sons, Ltd.     

Automated system for measuring snow surface energy balance components in mountainous terrain

The ability to continually monitor several meteorological parameters is needed to estimate snow surface energy balance components in mountainous terrain. In remote mountainous locations, limited accessibility and extreme weather conditions limit the use of delicate meteorological instrumentation. Robust instrumentation and radio telemetry are often needed to measure snow surface energy exchanges. This study examined the practicality and effectiveness of robust instrumentation in estimating radiative and turbulent exchanges in the forested Bear River Mountains of northern Utah. Measurement of reflected shortwave radiation was problematic due to possible selective absorption in the infra-red range. This resulted in overestimates of reflected shortwave radiation and decreased estimates of now surface albedo. During high snowfall, the pyranometer and net radiometer were occasionally covered with snow, resulting in inaccurate radiation measurements. Snow typically melted from instrument surfaces in less than one day under full sun. A relative humidity measurement accuracy of ± 4% may have resulted in a possible error of 20% in the calculation of vapour pressure. Snow depth measurement with an acoustical sensor was affected by new or blowing snow, which resulted in inaccurate snow depth measurement 16.2% of the time. The longest period without a valid snow depth measurement was 19.5 hours. A new snow temperature thermocouple ladder was designed and constructed and provided accurate within-pack temperature measurements throughout the pre-melt and melt season.