Names on the maps of Venus: A pre-MAGELLAN review

The topographic features on Venus are named with female names: craters and paterae have names of famous women as well as female first names, non-crater features have names of mythological characters. The first 80 names appeared on the maps after the Pioneer Venus mission; about 300 more names after the Venera 15 and 16 missions. 376 features of 17 types are now named. All the names are listed with their coordinates and attribute data. A large number of new names will be necessary after the MAGELLAN mission when detailed maps will be produced for nearly the whole surface of Venus.'Geology and Tectonics of Venus', special issue edited by Alexander T. Basilevsky (USSR Acad. of Sci., Moscow), James W. Head (Brown University, Providence), Gordon H. Pettengill (MIT, Cambridge, Massachusetts) and R. S. Saunders (J.P.L., Pasadena).     

Physical constraints on impact melt properties from Lunar Reconnaissance Orbiter Camera images

Impact melt flows exterior to Copernican-age craters are observed in high spatial resolution (0.5 m/pixel) images acquired by the Lunar Reconnaissance Orbiter Camera (LROC) Narrow Angle Camera (NAC). Impact melt is mapped in detail around 15 craters ranging in diameter from 2.4 to 32.5 km. This survey supports previous observations suggesting melt flows often occur at craters whose shape is influenced by topographic variation at the pre-impact site. Impact melt flows are observed around craters as small as 2.4 km in diameter, and preliminary estimates of melt volume suggest melt production at small craters can significantly exceed model predictions. Digital terrain models produced from targeted NAC stereo images are used to examine the three-dimensional properties of flow features and emplacement setting, enabling physical modeling of flow parameters. Qualitative and quantitative observations are consistent with low-viscosity melts heated above their liquidii (superheated) with limited amounts of entrained solids.     

Radial variation of lunar crater rim topography

The variation of rim topography as a function of range from the crater rim has been determined for a group of morphologically fresh lunar craters (D = 10–140 km) using the recent series of Lunar Topographic Orthophotomaps. The rate at which exterior crater topography converges with the surrounding surface is highly variable along different radial directions at individual craters as well as between different craters. At several craters, oblique impact appears to have contributed to azimuthal elevation/range variations. The topographic expression of a crater above the surrounding surface typically decreases to one-tenth of the estimated rim height at a range of 1.3R–1.7R, well within the rough-textured ejecta deposit surrounding the crater. Comparisons with terrestrial craters suggest that the topographic crater rim is predominantly a structural feature. In most craters large portions of the hummocky facies and virtually all of the radial facies, in spite of their rough appearance and local topographic variations, provide no significant net topographic addition to the preexisting surface. The extreme variability of crater rim topography strongly suggests that ejecta thicknesses are highly variable and that a unique power-law expression cannot truly represent the radial variation of ejecta deposit thickness.     

Testing landslide and atmospheric-effects models for the formation of double-layered ejecta craters on Mars

Double-layered ejecta (DLE) craters are distinctive among the variety of crater morphologies observed on Mars, but the mechanism by which they form remains under debate. We assess two ejecta emplacement mechanisms: (1) atmospheric effects from ejecta curtain-induced vortices or a base surge and (2) ballistic emplacement followed by a landslide of ejecta assisted by either surface- or pore-ice. We conduct a morphological analysis of the ejecta facies for three DLE craters which impacted into irregular pre-existing topography. We find that the unique topographic environments affected the formation of grooves and the inner facies, and thus appear to be inconsistent with an atmospheric-effects origin but are supportive of the landslide hypothesis. We distinguish between the two landslide models (lubrication by either surface- or pore-ice) by assessing relationships between DLE crater ejecta and morphologic features indicative of buried ice deposits, including sublimation pits, ring-mold craters, expanded secondary craters, and excess ejecta craters. The association of DLE craters with these features suggests that surface ice was present at the time of the impacts that formed the DLE craters. We also compare the Froude numbers of DLE crater ejecta to landslides, and find that the ejecta of DLE craters are kinematically and frictionally similar to terrestrial landslides that overran glaciers. This suggests that the grooves on DLE craters may plausibly form through the same shear/splitting mechanism as the landslides. In summary, our analysis supports the hypothesis that DLE craters form through meteoroid impacts into decameters-thick surface ice deposits (emplaced during periods of higher obliquity) followed by ejecta sliding on the ice.     

The geology of 433 Eros

Abstract— The global high‐resolution imaging of asteroid 433 Eros by the Near‐Earth Asteroid Rendezvous (NEAR) Shoemaker spacecraft has made it possible to develop the first comprehensive picture of the geology of a small S‐type asteroid. Eros displays a variety of surface features, and evidence of a substantial regolith. Large scale facets, grooves, and ridges indicate the presence of at least one global planar structure. Directional and superposition relations of smaller structural features suggest that fracturing has occurred throughout the object. As with other small objects, impact craters dominate the overall shape as well as the small‐scale topography of Eros. Depth/diameter ratios of craters on Eros average ～0.13, but the freshest craters approach lunar values of ～0.2. Ejecta block production from craters is highly variable; the majority of large blocks appear to have originated from one 7.6 km crater (Shoemaker). The interior morphology of craters does not reveal the influence of discrete mechanical boundaries at depth in the manner of craters formed on lunar mare regolith and on some parts of Phobos. This lack of mechanical boundaries, and the abundant evidence of regolith in nearly every high‐resolution image, suggests a gradation in the porosity and fracturing with depth. The density of small craters is deficient at sizes below ～200 m relative to predicted slopes of empirical saturation. This characteristic, which is also found on parts of Phobos and lunar highland areas, probably results from the efficient obliteration of small craters on a body with significant topographic slopes and a thick regolith. Eros displays a variety of regolith features, such as debris aprons, fine‐grained “ponded” deposits, talus cones, and bright and dark streamers on steep slopes indicative of efficient downslope movement of regolith. These processes serve to mix materials in the upper loose fragmental portion of the asteroid (regolith). In the instance of “ponded” materials and crater wall deposits, there is evidence of processes that segregate finer materials into discrete deposits. The NEAR observations have shown us that surface processes on small asteroids can be very complex and result in a wide variety of morphologic features and landforms that today seem exotic. Future missions to comets and asteroids will surely reveal still as yet unseen processes as well as give context to those discovered by the NEAR Shoemaker spacecraft.     

The rayed crater Zunil and interpretations of small impact craters on Mars

A 10-km diameter crater named Zunil in the Cerberus Plains of Mars created ∼¹⁰⁷ secondary craters 10 to 200 m in diameter. Many of these secondary craters are concentrated in radial streaks that extend up to 1600 km from the primary crater, identical to lunar rays. Most of the larger Zunil secondaries are distinctive in both visible and thermal infrared imaging. MOC images of the secondary craters show sharp rims and bright ejecta and rays, but the craters are shallow and often noncircular, as expected for relatively low-velocity impacts. About 80% of the impact craters superimposed over the youngest surfaces in the Cerberus Plains, such as Athabasca Valles, have the distinctive characteristics of Zunil secondaries. We have not identified any other large (?10 km diameter) impact crater on Mars with such distinctive rays of young secondary craters, so the age of the crater may be less than a few Ma. Zunil formed in the apparently youngest (least cratered) large-scale lava plains on Mars, and may be an excellent example of how spallation of a competent surface layer can produce high-velocity ejecta (Melosh, 1984, Impact ejection, spallation, and the origin of meteorites, Icarus 59, 234-260). It could be the source crater for some of the basaltic shergottites, consistent with their crystallization and ejection ages, composition, and the fact that Zunil produced abundant high-velocity ejecta fragments. A 3D hydrodynamic simulation of the impact event produced 10¹⁰ rock fragments ?10 cm diameter, leading to up to 10⁹ secondary craters ?10 m diameter. Nearly all of the simulated secondary craters larger than 50 m are within 800 km of the impact site but the more abundant smaller (10-50 m) craters extend out to 3500 km. If Zunil is representative of large impact events on Mars, then secondaries should be more abundant than primaries at diameters a factor of ∼1000 smaller than that of the largest primary crater that contributed secondaries. As a result, most small craters on Mars could be secondaries. Depth/diameter ratios of 1300 small craters (10-500 m diameter) in Isidis Planitia and Gusev crater have a mean value of 0.08; the freshest of these craters give a ratio of 0.11, identical to that of fresh secondary craters on the Moon (Pike and Wilhelms, 1978, Secondary-impact craters on the Moon: topographic form and geologic process, Lunar Planet. Sci. IX, 907-909) and significantly less than the value of ∼0.2 or more expected for fresh primary craters of this size range. Several observations suggest that the production functions of Hartmann and Neukum (2001, Cratering chronology and the evolution of Mars, Space Sci. Rev. 96, 165-194) predict too many primary craters smaller than a few hundred meters in diameter. Fewer small, high-velocity impacts may explain why there appears to be little impact regolith over Amazonian terrains. Martian terrains dated by small craters could be older than reported in recent publications.     

An investigation of Martian northern high‐latitude and polar impact crater interiors: Atypical interior topographic features and cavity wall slopes

Abstract– We examine Martian northern high‐latitude and polar impact craters (NPICs) to better understand the north polar materials and polar processes. We examine topographic characteristics for 346 NPICs and compare them to global fit data (e.g., Garvin et al. 2003 ; Boyce and Garbeil 2007 ) as well as to a small set (N = 92) of southern high‐latitude and polar impact craters (SPICs). We find that the NPIC population above 57° N is significantly shallower than the global crater population. This suggests that the NPICs (1) were initially shallow due to target properties of polar geologic units; (2) were once deeper, but have been infilled due to polar processes; or (3) a combination of both. Indeed, many of the NPICs exhibit considerable noncentral peak interior topographic features (IFTs), which may be indicative of infilling processes. The NPIC IFTs also appear to display trends in their preferential orientation within the crater cavity; some SPICs display similar interior features, but do not show a clear preference in their orientation within the crater cavity. In addition, the NPIC population displays cavity wall slope trends that seem to indicate steepening of slopes with increasing crater diameter in comparison to the global slope trend ( Garvin et al. 2003 ). These trends suggest that the NPICs are unique in their geometry when compared to the global data set as well as with the SPICs further indicating that the north polar region may exhibit target properties and polar processes not seen in the south polar region or elsewhere on Mars.     

Bosumtwi impact structure,Ghana: Evidence for fluidized emplacement of the ejecta

The about 10.5 km diameter Bosumtwi impact crater is one of the youngest large impact structures on Earth. The crater rim is readily noticed on topographic maps or in satellite imagery. It defines a circular basin filled by water (Lake Bosumtwi) and lacustrine sediments. The morphology of this impact structure is also characterized by a circular plateau extending beyond the rim and up to 9–10 km from the center of the crater (about 2 crater radii). This feature comprises a shallow ring depression, also described as an annular moat, and a subdued circular ridge at its outer edge. The origin of this outermost feature could so far not be elucidated based on remote sensing data only. Our approach combines detailed topographic analysis, including roughness mapping, with airborne radiometric surveys (mapping near‐surface K, Th, U concentrations) and field observations. This provides evidence that the moat and outer ring are features inherited from the impact event and represent the partially eroded ejecta layer of the Bosumtwi impact structure. The characteristics of the outer ridge indicate that ejecta emplacement was not purely ballistic but requires ejecta fluidization and surface flow. The setting of Bosumtwi ejecta can therefore be considered as a terrestrial analog for rampart craters, which are common on Mars and Venus, and also found on icy bodies of the outer solar system (e.g., Ganymede, Europa, Dione, Tethys, and Charon). Future studies at Bosumtwi may therefore help to elucidate the mechanism of formation of rampart craters.     

Viscous relaxation of impact craters on icy planetary surfaces: Determination of viscosity variation with depth

Spacecraft images show that the icy Galilean satellites have surfaces with very low topographic relief. Impact craters on Ganymede and Callisto are anomalously shallow and are characterized by sharp well-defined rims and domed floors. These morphological characteristics can be explained by viscous relaxation of topography on an icy crust in which the viscosity is uniform or decreases with depth. Under these conditions, large craters relax more rapidly than small craters, therefore explaining a possible underabundance of large craters. Viscous relaxation on an icy crust that is thin compared to the crater diameter or on a thick icy crust in which viscosity increases with depth could not produce this crater morphology and would result in the more rapid relaxation of small craters rather than large craters. The results of this study suggest that more detailed analysis of relaxing impact crater morphology may resolve the rate of viscosity decrease with depth and so provide evidence on the interior thermal evolution of icy planetary bodies.     

A study of candidate marine target impact craters in Arabia Terra,Mars

Abstract– Previous workers have proposed that a northern ocean existed early during Martian geologic history and the shorelines of that ocean would coincide roughly with the crustal dichotomy that divides the smooth, northern lowlands with the cratered, southern highlands. Arabia Terra is a region on Mars that straddles the crustal dichotomy, and several proposed shorelines are located in the area. Shallow marine impact craters on Mars likely would exhibit features like those on Earth, including characteristic morphological features that are distinctly different from that of craters formed on land. Common attributes of terrestrial marine impact craters include features of wet mass movement such as gravity slumps and debris flows; radial gullies leading into the crater depression; resurge deposits and blocks of dislocated materials; crater rim collapse or breaching of the crater wall; a central peak terrace or peak ring terrace; and subdued topography (an indicator of both age and possible flood inundation immediately following impact). In this article, these features have been used to evaluate craters on Mars as to a possible marine origin. This study used a simple quantification system to approximately judge and rank shallow marine impact crater candidates based on features observed in terrestrial analogs. Based on the quantification system, 77 potential shallow marine impact craters were found within an area bounded by 20°N and 40°N as well as 20°W and 20°E. Nine exemplary candidates were ranked with total scores of 70% or more. In a second, smaller study area, impact craters of approximately similar size and age were evaluated as a comparison and average total scores are 35%, indicating that there is some morphological difference between craters inside and outside the proposed shorelines. Results of this type of study are useful in helping to develop a general means of classification and characterization of potential marine craters.     

Physical properties of lunar craters

The surface of the Moon is highly cratered due to impacts of meteorites, asteroids, comets and other celestial objects. The origin, size, structure, age and composition vary among craters. We study a total of 339 craters observed by the Lunar Reconnaissance Orbiter Camera(LROC). Out of these 339 craters, 214 craters are known(named craters included in the IAU Gazetteer of Planetary Nomenclature) and 125 craters are unknown(craters that are not named and objects that are absent in the IAU Gazetteer). We employ images taken by LROC at the North and South Poles and near side of the Moon. We report for the first time the study of unknown craters, while we also review the study of known craters conducted earlier by previous researchers. Our study is focused on measurements of diameter, depth, latitude and longitude of each crater for both known and unknown craters. The diameter measurements are based on considering the Moon to be a spherical body. The LROC website also provides a plot which enables us to measure the depth and diameter. We found that out of 214 known craters, 161 craters follow a linear relationship between depth(d) and diameter(D), but 53 craters do not follow this linear relationship. We study physical dimensions of these 53 craters and found that either the depth does not change significantly with diameter or the depths are extremely high relative to diameter(conical). Similarly, out of 125 unknown craters, 78 craters follow the linear relationship between depth(d) and diameter(D) but 47 craters do not follow the linear relationship.We propose that the craters following the scaling law of depth and diameter, also popularly known as the linear relationship between d and D, are formed by the impact of meteorites having heavy metals with larger dimension, while those with larger diameter but less depth are formed by meteorites/celestial objects having low density material but larger diameter. The craters with very high depth and with very small diameter are perhaps formed by the impact of meteorites that have very high density but small diameter with a conical shape. Based on analysis of the data selected for the current investigation, we further found that out of 339 craters, 100(29.5%) craters exist near the equator, 131(38.6%) are in the northern hemisphere and 108(31.80%) are in the southern hemisphere. This suggests the Moon is heavily cratered at higher latitudes and near the equatorial zone.     

Disharmony of the spheres: Recent trends in planetary surface nomenclature

Inadvisable departures from tradition in naming newly mapped features on Mars, Mercury, and the Moon have been implemented and proposed since 1970. Functional need for place names also has become confused with cartographic convenience. Much of the resulting new nomenclature is neither unique, efficient, nor imaginative. The longstanding classical orientation in Solar System geography needs to be firmly reasserted. The Mädler scheme for designating smaller craters on the Moon should be retained and extended to the farside. Names of surface features on other bodies might best reflect the traditional connotations of planet and satellite names: for example, most crates on Mars would be named for mythical heroes and military personalities in ancient history, craters on Mercury might commemorate explorers or commercial luminaries, and features on Venus would bear the names of famous women.     

Beagle-2 position determination from the returned camera panoramas using MOLA data

After the Beagle-2 lander of the Mars Express mission comes to rest on the surface of Isidis Planitia in late December 2003 to carry out a range of geochemistry and exobiology experiments, there will be considerable interest in determining its exact location. This work considers the feasibility of identifying topographic features seen in the Mars Global Surveyor MOLA dataset in images of the horizon returned by the lander, and the probability of observing lesser features identifiable in orbital imagery. By taking bearings from such features, and attempting to match the configuration back to the available data, it may be possible to determine the spacecraft's position with high precision. Since the MOLA data is fairly coarse compared to the area of the landing ellipse, the range of visibility and likelihood of observation of each of the resolved craters in the area is considered. For the more numerous smaller craters and many small knobs a probabilistic view is taken.     

Origin of bright ring-shaped craters in radar images of Venus

The surface of Venus viewed in Arecibo radar images has a small population of bright ring-shaped features. These features are interpreted as the rough or blocky deposits surrounding craters of impact or volcanic origin. Population densities of these bright ring features are small compared with visually identified impact craters on the surface of the Moon and volcanic craters on Io. However, they are comparable to the short-lived radar-bright haloes associated with ejecta deposits of young craters on the Moon. This suggests that bright radar signatures of the deposits around Venusian craters are obliterated by an erosional or sedimentary process. We have evaluated the hypothesis that bright radar crater signatures were obliterated by a global mantle deposited after impacts of very large bolides. The mechanism accounts satisfactorily for the population of features with internal diameters greater than 64 km. The measured population of craters with internal diameters between 32 and 64 km is difficult to account for with the model but it may be underestimated because of poor radar resolution (5 to 20 km). Other possible mechanisms for the removal of radar bright crater signatures include in situ chemical weathering of rocks and mantling by young volcanic deposits. All three alternatives may be consistent with existing radar roughness and cross-section data and Venera 8, 9, and 10 data. However, imaging observations from a lander on the rolling plains or lowlands may verify or disprove the proposed global mantling. New high-resolution ground-based radar data can also contribute new information on the nature and origin of these radar bright ring features.     

Machine cataloging of impact craters on Mars

This study presents an automated system for cataloging impact craters using the MOLA 128 pixels/degree digital elevation model of Mars. Craters are detected by a two-step algorithm that first identifies round and symmetric topographic depressions as crater candidates and then selects craters using a machine-learning technique. The system is robust with respect to surface types; craters are identified with similar accuracy from all different types of martian surfaces without adjusting input parameters. By using a large training set in its final selection step, the system produces virtually no false detections. Finally, the system provides a seamless integration of crater detection with its characterization. Of particular interest is the ability of our algorithm to calculate crater depths. The system is described and its application is demonstrated on eight large sites representing all major types of martian surfaces. An evaluation of its performance and prospects for its utilization for global surveys are given by means of detailed comparison of obtained results to the manually-derived Catalog of Large Martian Impact Craters. We use the results from the test sites to construct local depth-diameter relationships based on a large number of craters. In general, obtained relationships are in agreement with what was inferred on the basis of manual measurements. However, we have found that, in Terra Cimmeria, the depth/diameter ratio has an abrupt decrease at ∼38°S regardless of crater size. If shallowing of craters is attributed to presence of sub-surface ice, a sudden change in its spatial distribution is suggested by our findings.     

Dust transport near electron beam impact and shadow boundaries

When the moon enters the plasma sheet of the earth, high energy electron fluxes are incident upon the lunar surface. Some regions are in the shadow of these fluxes due to topographic features. Large electric fields were found at similar shadow boundaries created by the electron beams incident upon an obstacle in the laboratory. Potentials on the beam-illuminated surface follow beam energies and were negative relative to potentials on the shadowed surface. Charged dust particles in the beam-illuminated region were observed to move into the shadow due to these electric fields. The oblique incidence of the electron fluxes upon craters can lead to a portion of the crater surface in the beam-illumination and another portion in the shadow. Dust particles on the slopes of the craters can thus experience large electric fields and transport downhill to fill the bottom of the craters. This mechanism may contribute to the formation of dust ponds observed by the NEAR-Shoemaker spacecraft at Eros, and might be at work on the lunar surface as well. In the laboratory, we used electron fluxes with energies up to 90 eV to bombard an insulating half-pipe. An angle of incidence was chosen so that the impact occurred on farside of the slope and left the bottom and the nearside slope in the shadow. Dust particles on the beam-illuminated slope moved down along the surface toward the bottom of the half-pipe and hopped to the bottom as well, while particles on the shadowed slope remained at rest.     

Assessing spectral evidence of aqueous activity in two putative martian paleolakes

We evaluate the evidence for the presence of mineral spectral signatures indicative of the past presence of water at two putative paleolakes on Mars using observations by the Mars Reconnaissance Orbiter (MRO) Compact Reconnaissance Image Spectrometer for Mars (CRISM). CRISM spectra of both sites are consistent with laboratory spectra of Mg-rich phyllosilicates. Our analysis represents the first detailed evaluation of these locations. The spatial occurrence and association with topographic features within the craters is distinctly different for the two sites. The occurrence of these minerals supports the conclusion that water was once active in the areas sampled by these craters. The distribution of the phyllosilicates in Luqa does not provide distinctive evidence for the presence of a previous standing body of water and is consistent with either impact emplacement or post-impact alteration. For Cankuzo, the phyllosilicate distribution provides evidence of a layer in the crater wall indicative of aqueous activity, but does not require a paleolake.     

SOME MORPHOLOGIC SYSTEMATICS OF COMPLEX IMPACT STRUCTURES

Similarities among impact structures on different planets and satellites suggest that the cratering process transcends variations in both target and impactor. In particular, impact may control the spacing of concentric rings, if not their actual emplacement. In at least four respects the scaled horizontal dimensions of complex meteorite-impact structures on Earth resemble those of multi-ring basins and large craters on the Moon, Mars, Mercury, and some outer satellites: (1) Base diameter of the (topographic) central peak is a constant 20% to 25% of the rim diameter in small complex craters; (2) it averages only half as much in large structures that also have concentric rings; (3) the inner ring of a two-ring crater lacking a central peak is half the diameter of the outer ring; (4) adjacent rings of complex craters that have more than two concentric rings are spaced at a constant interval of about (2.0 ± 0.2)^0.5 D, both inside and outside the main ring. Two minor differences in morphology suggest that uniquely terrestrial conditions may control some horizontal dimensions of meteorite craters: (1) the inner ring of a two-ringed structure that also has a central peak is 0.5X the diameter of the outer, not 0.4X as it is for peak-plus-ring basins on the planets; and (2) two-ring and multi-ring meteorite craters occupy the same size range, whereas on planets most two-ring basins are smaller than multi-ring basins.     

A survey of possible impact structures on 25143 Itokawa

We determined the morphologies and dimensions of possible impact craters on the surface of Asteroid 25143 Itokawa from images taken by the Hayabusa spacecraft. Circular depressions, circular features with flat floors or convex floors, and circular features with smooth surfaces were identified as possible craters. The survey identified 38 candidates with widely varying morphologies including rough, smooth and saddle-shaped floors, a lack of raised rims and fresh material exposures. The average depth/diameter ratio was 0.08±0.03: these craters are very shallow relative to craters observed on other asteroids. These shallow craters are a result of (1) target curvature influencing the cratering process, (2) raised rim not being generated by this process, and (3) fines infilling the craters. As many of the crater candidates have an unusual appearance, we used a classification scheme that reflects the likelihood of an observed candidate's formation by a hypervelocity impact. We considered a variety of alternative interpretations while developing this scheme, including inherited features from a proto-Itokawa, spall scars created by the disruption of the proto-Itokawa, spall scars following the formation of a large crater on Itokawa itself, and apparent depressions due to random arrangements of boulders. The size-frequency distribution of the crater candidates was close to the empirical saturation line at the largest diameter, and then decline with decreasing diameter.     

Remote Sensing of Mars: Detection of Impact Craters on the Mars Global Surveyor DTM by Integrating Edge- and Region-Based Algorithms

This study integrates two different computer vision approaches, namely the circular Hough transform (CHT) and the determinant of Hessian (DoH), to detect automatically the largest number possible of craters of any size on the digital terrain model (DTM) generated by the Mars Global Surveyor mission. Specifically, application of the standard version of CHT to the DTM captured a great number of craters with diameter smaller than?~?50 km only, failing to capture larger craters. On the other hand, DoH was successful in detecting craters that were undetected by CHT, but its performance was deterred by the irregularity of the topographic surface encompassed: strongly undulated and inclined (trended) topographies hindered crater detection. When run on a de-trended DTM (and keeping the topology unaltered) DoH scored higher. Current results, although not optimal, encourage combined use of CHT and DoH for routine crater detection undertakings.