Experimental investigation of reaction coronas on olivine in Apollo 14 high-grade breccias

Reaction coronas of pyroxene ± ilmenite occur around clasts of olivine in Apollo 14 high-grade metamorphic breccias. In experiments of several months duration, there was no evidence of corona formation at 1000°C, but at 1050°, withfO₂ at or above Ilm-Ru-Fe and below Fe-Fe₁?x O, incipient coronas formed around Fo_50–70 in synthetic 14311 matrix. In addition, withfO₂ controlled by Ilm-Ru-Fe at 1050°C, the olivines reduced to Fo₆₈, En₆₉ + Fe. Reduction of olivine under these conditions is inconsistent with the calculated stability relations and is attributed to uncertainties in the activity coefficient for olivine or pyroxene. The experiments also suggest that vesicularity in the Apollo 14 high-grade breccias may correlate with the amount of glassy material in their unmetamorphosed precursors. The metamorphic event is attributed to burial in a hot ejecta blanket, such as that of the Imbrium event.     

Petrology and chemistry of two “large” granite clasts from the moon

Pristine granite clasts in Apollo-14 breccias 14321 and 14303 have estimated masses of 1.8 and 0.17 g, respectively. The 14321 clast is ～ 60% K-feldspar and 40% quartz, with traces of extremely Mg-poor mafic silicates and ilmenite. The 14303 clast is roughly 33% plagioclase, 32% K-feldspar, 23% quartz, 11% pyroxene, and 1% ilmenite; pyroxene and ilmenite are moderately Mg-rich; plagioclase and pyroxene are strongly zoned. Both clasts are severely brecciated, but monomict (pristine). Both have abundant graphic intergrowths of K-feldspar with quartz. Unlike the majority of similar Earth rocks, both clasts are devoid of hydrous phases. The bulk composition of the 14321 clast is similar to those of several other lunar granitic samples, but the 14303 clast is unique: it bears as close a resemblance to KREEP as it does to other lunar granites. Silicate liquid immiscibility may explain why the granites are low in REE relative to KREEP.     

Criteria for interpreting kimberlite as coherent: insights from the Muskox and Jericho kimberlites (Nunavut,Canada)

The Jurassic Muskox and Jericho kimberlites (Northern Slave Province, Nunavut, Canada) contain a variety of facies exhibiting different geometries, contact relationships, internal organisation, country rock abundance and olivine shapes, although many have similar matrix/groundmass mineralogies and textures. Five facies are examined that either have characteristics consistent with coherent rocks in general (i.e. intrusive and extrusive non-fragmental rocks) or are mineralogically and texturally similar to kimberlite described as coherent (or apparent coherent). Three facies are interpreted as coherent on the basis of: (1) geological setting, (2) apparent-porphyritic texture, (3) sharp contacts with fragmental kimberlite, (4) relative abundance of elongate and unbroken olivine crystals and (5) paucity of country rock xenoliths, while the remaining two facies are interpreted as fragmental on the basis of: (1) the gradational contacts with demonstrably fragmental kimberlite, (2) relative abundance and range of sizes of country rock lithic clasts and (3) numerous broken olivine crystals. Comparisons are made with coherent and apparent-coherent kimberlite from the literature. Our three coherent facies are similar to literature reported coherent kimberlite dykes hosted in country rock (CK_d) in terms of internal organisation, low abundance of country rock xenoliths, and apparent-porphyritic texture. Conversely, our two fragmental facies share attributes with previously described pipe-filling coherent and apparent-coherent kimberlite (CK_pf) in terms of geometry, internal organisation and abundance of country rock xenoliths. We conclude that CK_d and most CK_pf, although similar in matrix/groundmass mineralogy and texture, can be distinguished on the basis of internal organisation, country rock lithic clast abundance, texture (e.g. apparent-porphyritic texture) and possibly olivine crystal shapes and suggest that fragmental kimberlite is more common than reported.     

Olivine basalt and trachyandesite peperites formed at the subsurface/surface interface of a semi-arid lake: An example from the Early Miocene Bigadiç basin,western Turkey

Miocene successions in western Turkey are dominated by lacustrine, fluvial and evaporitic sedimentary deposits. These deposits include considerable amounts of volcaniclastic detritus derived from numerous NE-trending volcanic centres in western Turkey as well as in the Bigadiç region. Early Miocene syn-depositional NE-trending olivine basalt and trachyandesite bodies that formed as intrusions and lava flows occur within the Bigadiç borate basin. Olivine basalts occur as partly emergent intrusions, and trachyandesite dykes fed extensive lava flows emplaced in a semi-arid lacustrine environment.Peperites associated with the olivine basalt and trachyandesites appear to display contrasting textural features, although all the localities include a large variety of clast morphologies from blocky to fluidal. Fluidal clasts, mainly globular, ameboidal and pillow-like varieties, are widespread in the peperite domains associated with olivine basalts, apparently due to large-volume sediment fluidisation. In contrast, fluidal clasts related to trachyandesites are restricted to narrow zones near the margins of the intrusions and have commonly elongate and polyhedral shapes with digitate margins, rather than globular and equant varieties. Blocky and fluidal clasts in the olivine basalt peperite display progressive disintegration, suggesting decreasing temperature and increasing viscosity during fragmentation. Abundance of blocky clasts with respect to fluidal clasts in the trachyandesite peperite indicates that the fluidal emplacement and low-volume sediment fluidisation in the early stages were immediately followed by quench fragmentation due to the high viscosity of the magma.Size, texture and abundance of the blocky and fluidal clasts in the olivine basalt and trachyandesite peperites were mainly controlled by sediment fluidisation, pulsatory magma injection and magma properties such as composition, viscosity, vesicularity, and size, abundance and orientation of phenocrysts. Variously combining these contrasting features to varying degrees may form diverse juvenile clast shapes in peperitic domains.     

The Adhi Kot breccia and implications for the origin of chondrules and silica-rich clasts in enstatite chondrites

The Adhi Kot EH4 enstatite chondrite breccia consists of silica-rich clasts (12+mn; 5 vol.%), chondrule-rich clasts (55+mn; 10 vol.%) and matrix (35+mn; 10 vol.%). The silica-rich clasts are a new kind of enstatite chondritic material, which contains more cristobalite (18–28 wt.%) than enstatite (12–14 wt.%), as well as abundant niningerite and troilite. The bulk atomic Mg/Si ratios of the clasts (0.22–0.40) are much lower than the average for enstatite chondrites (0.79). Kamacite and martensite (with 8–11 wt.% Ni and a martensitic structure) occur in all three breccia components. The clasts have kamacite-rich rims, and kamacite-rich aggregates occur in the matrix.A unidirectional change in the ambient pS₂/pO₂ ratio in the region of the solar nebula where Adhi Kot agglomerated can explain many of the breccia's petrologic features. If this region initially had a very high pS₂/pO₂ ratio in a gas of non-cosmic composition, sulfurization of enstatite and metallic Fe (e.g., MgSiO₃ + 2Fe + C + 3H₂S = MgS + SiO₂ + 2FeS + H₂O + CH₄) may have occurred, producing abundant niningerite, free silica and troilite at the expense of enstatite and metallic Fe. The Ni content of the residual metal would have increased, perhaps to ～ 8–10 wt.%. The silica-rich clasts agglomerated under these conditions; a significant fraction of the originally produced niningerite was lost (perhaps by aerodynamic size-sorting processes), lowering the clasts' bulk Mg/Si ratios.The pS₂/pO₂ ratio then decreased (perhaps because of infusion of additional H₂O) and sulfurization of metallic Fe and enstatite ceased. The chondrule-rich clasts agglomerated under these conditions, acquiring little free silica and niningerite. An episode of chondrule formation occurred at this time (by melting millimeter-sized agglomerates of this relatively silica-poor enstatite chondrite material and concomitant fractionation of an immiscible liquid of metallic Fe,Ni and sulfide). The chondrule-rich clasts agglomerated many such chondrules. Subsequently, the matrix agglomerated, acquiring the few remaining chondrules. Kamacite-rich aggregates formed, after the cessation of metal sulfurization, and agglomerated with the matrix. The kamacite-rich clast rims were acquired at this time.The components of Adhi Kot accreted to the EH chondrite parent body, where the breccia was assembled, buried beneath additional accreting material, and metamorphosed at temperatures of ? 700°C. Impact-excavation of the breccia and deposition onto the surface caused the formation of martensite from taenite inside the clasts and the matrix. At the surface, impact-melting produced an albite glass spherule, which was incorporated into the matrix. However, the absence of solar-wind-implanted rare gases in bulk Adhi Kot indicates that the breccia spent little time in a regolith.     

The crystallisation of lunar basalts

The crystallisation of olivine (O) and silica (S) normative varieties of Apollo 11 crystalline rocks has been followed at 1 atm. The sequence of phases precipitating is (S): spinel, olivine, ilmenite, clinopyroxene plus plagioclase; and (O): spinel, olivine, ilmenite plus plagioclase, clinopyroxene. The last 50% (O) to 75% (S) of the liquid crystallises as a pyroxene-plagioclase-ilmenite cotectic over a narrow temperature range, approximately 1095 to 1125° C, leaving a small silica-rich residue.     

Apollo 17 KREEPy basalt: A rock type intermediate between mare and KREEP basalts

The Apollo 17 KREEPy basalt is a unique lunar volcanic rock, observed only as clasts in the light friable breccia matrix (72275) of Boulder 1, Station 2 at Taurus-Littrow. Its status as a volcanic rock is confirmed by the absence of any meteoritic contamination, a lack of cognate inclusions or xenocrystal material, and low Ni contents in metal grains.The basalt was extruded 4.01 ± 0.04 b.y. ago, approximately contemporaneously with the high-alumina mare basalts at Fra Mauro; shortly afterwards it was disrupted, probably by the Serenitatis impact, and its fragments emplaced in the South Massif. The basalt, which is quartz-normative and aluminous, is chemically and mineralogically intermediate between the Apollo 15 KREEP basalts and the high-alumina mare basalts in most respects. It consists mainly of plagioclase and pigeonitic pyroxene in approximately equal amounts, and 10–30% of mesostatis. Minor phases outside of the mesostatis are chromite, a silica mineral, Fe-metal, and rare olivine; the mesostatis consists primarily of ilmenite, Fe-metal, troilite, and ferroaugite, set in a glassy or microcrystalline Si-rich base.Chemical and isotopic data indicate that an origin by partial melting of a distinct source region is more probable than hybridization or contamination of magmas, and is responsible for the transitional composition of the basalt. The moon did not produce two completely distinct volcanic groups, the KREEP basalts and the mare/mare-like basalts; some intermediate rock types were generated as well. A corresponding spectrum of source regions must exist in the interior of the moon.     

ALH85085: a unique volatile-poor carbonaceous chondrite with possible implications for nebular fractionation processes

Allan Hills 85085 is a unique chondrite with affinities to the Al Rais-Renazzo clan of carbonaceous chondrites. Its constituents are less than 50 μm in mean size. Chondrules and microchondrules of all textures are present; nonporphyritic chondrules are unusually abundant. The mean compositions of porphyritic, nonporphyritic and barred olivine chondrules resemble those in ordinary chondrites except that they are depleted in volatile elements. Ca-, Al-rich inclusions are abundant and largely free of nebular alteration; they comprise types similar to those in CM and CO chondrites, as well as unique types. Calcium dialuminate occurs in several inclusions. Metal, silicate and sulfide compositions are close to those in CM-CO chondrites and Al Rais and Renazzo. C1-chondrite clasts and metal-rich “reduced” clasts are present, but opaque matrix is absent. Siderophile abundances in ALH85085 are extremely high (e.g., Fe/Si= 1.7 × solar), and volatiles are depleted (e.g., Na/Si= 0.25 × solar, S/Si= 0.03 × solar). Nonvolatile lithophile abundances are similar to those in Al Rais, Renazzo, and CM and CO chondrites.ALH85085 agglomerated when temperatures in the nebula were near 1000 K, in the same region where Renazzo, Al Rais and the CI chondrites formed. Agglomeration of high-temperature material may thus be a mechanism by which the fractionation of refractory lithophiles occurred in the nebula. Chondrule formation must have occurred at high temperatures when clumps of precursors were small. After agglomeration, ALH85085 was annealed and lightly shocked. C1 and other clasts were subsequently incorporated during late-stage brecciation.     

The Blithfield meteorite and the origin of sulfide-rich,metal-poor clasts and inclusions in brecciated enstatite chondrites

Blithfield (EL6) is one of five known enstatite chondrite breccias. It consists of troilite-rich clasts (35 ± 5vol.%) embedded in an extremely metallic Fe,Ni-rich matrix (65 ± 5 vol.%) that contains metal nodules up to 17 mm in size. Clasts and matrix agglomerated independently in the solar nebula under conditions of high and lowpS₂/pO₂ ratios, respectively. The matrix accreted to an EL chondrite planetesimal and was metamorphosed to～ 1000°C, above the FeNiS eutectic; chondrule textures were obliterated. The S-rich eutectic melt was lost from the matrix. The matrix material was buried to a depth of at least 3 km; accreting troilite-rich material was incorporated into the matrix as clasts. The breccia cooled through～ 500°C at 1000–10,000°C/Myr. After cooling below～ 500°C, Blithfield was quenched, possibly by impact excavation from depth and deposition onto the surface.Clasts or inclusions that are enriched in sulfide and depleted in metallic Fe,Ni are common in brecciated enstatite chondrites. Variations in thepS₂/pO₂ ratio in the nebular regions where these materials formed may explain many of their petrologic properties. The silica-rich clasts in Adhi Kot (EH4) formed at very highpS₂/pO₂ratios(> 10²⁷); niningerite, free silica and troilite were produced from the sulfurization of enstatite and metallic Fe. The troilite-rich clasts in Blithfield and Atlanta (EL6) as well as the troilite-rich regions of the Hvittis (EL6) matrix formed at somewhat lowerpS₂/pO₂ ratios where sulfurization of metalic Fe produced troilite. The Ni content of the residual metal increased, forming some metal of martensitic composition. The dark inclusions in Abee (EH 4), which contain up to 9 wt.% oldhamite, formed at highpS₂/pO₂ ratios in the presence of an additional Ca-rich component.     

Ferroan anorthosite: A widespread and distinctive lunar rock type

Eight of eleven Apollo 16 rake-sample anorthosites are very similar to each other, to hand-specimen Apollo 16 anorthosites, and to Apollo 15 anorthosites. They have feldspar An_96.6, both high- and low-Ca pyroxene with a restricted range of (low-magnesium) composition, minor olivine (～ Fo₆₀), traces of ilmenite and chromite, and originally coarse-grained, but now cataclastic texture. Such ferroan anorthosite is evidently a coherent, distinctive and widespread lunar rock type of cumulate origin which may not necessarily be very closely related genetically to other highland rock types.     

High-magnesium primary magmas from Haleakala Volcano, east Maui, Hawaii: petrography, nickel, and major-element constraints

For any given volcanic field the compositions of primary melts provide important constraints on models of magmatic processes and volcanic eruptions. In this paper, based on petrography, olivine and bulk rock compositions, two tholeiitic picrites (samples C122 and C123) from Haleakala Volcano, east Maui are evaluated as possible primary melts. Sample C122 (bulk rock MgO = 16.6%) has a high apparent Mg-Fe exchange coefficient, K_D, between olivine phenocrysts and bulk rock (0.6). However, major-elements and Ni mass-balance calculations show that the olivines in C122 are in equilibrium with the residual melt (matrix) after closed-system equilibrium fractionation of 25 wt.% olivine. Therefore, the Mg/Fe ratio, Ca content, and Ni content of C122 are consistent with the hypothesis that the bulk composition of C122 is close to a primary melt formed by partial melting of a mantle containing olivine with composition around Fo₈₉ to Fo₉₁. The uniform composition and small size (mostly 0.2–0.3 mm) of the olivine, and the glass patches in the matrix suggest fast ascent, and rapid cooling at shallow depth for C122. On the contrary, sample C123, which has an apparent K_D (between the most mafic olivine megacrysts and the bulk rock) close to the equilibrium value (0.27), the multiple planar subgrain boundaries in most of the olivine crystals indicate that it may not be a primary melt unless the deformed olivines are generated at magmatic condition as phenocrysts. If the deformed subgrain boundary texture in olivine could indeed be generated at magmatic condition, then the wide compositional range of olivine crystals in C123 (Fo₇₄ to Fo₉₁) suggests multi-stage crystallization over a wide range of cooling temperatures.The compositions of the two picrites, and a differentiated basalt which does not contain xenocrysts suggest that the Haleakala tholeiites are derived from primary melts with at least 16–17 wt.% MgO. Lavas with such high MgO content are rare in Haleakala and other Hawaiian volcanoes; therefore, most Hawaiian tholeiites must have undergone extensive fractionation histories.     

Evidence of magma mixing: Petrological study of Shirouma-Oike calc-alkaline andesite volcano, Japan

Shirouma-Oike volcano, a Quaternary composite volcano in central Japan, consists mostly of calc-alkaline andesitic lavas and pyroclastic rocks. Products of the earlier stage of the volcano (older group) are augite-hypersthene andesite. Hornblende crystallized during the later stage of this older group, whereas biotite and quartz crystallized in the younger group.Assemblages of phenocrysts in disequilibrium, such as magnesian olivine(Fo₃₀)/quartz, iron-rich hypersthene(En₅₅)/iron-poor augite(Wo_43.5, En_42.5, Fs_14.0), and two different types of zoning on the rim of clinopyroxene are found in a number of rocks. Detailed microprobe analyses of coexisting minerals reveal that phenocrysts belong to two distinctly different groups; one group includes magnesian olivine + augite which crystallized from a relatively high-temperature (above 1000°C) basaltic magma; the second group, which crystallized from relatively low temperature (about 800°C) dacitic to andesitic magma, includes hypersthene + hornblende + biotite + quartz + plagioclase + titanomagnetite ± ilmenite (in the younger group) and hypersthene + augite + plagioclase + titanomagnetite ± hornblende (in the older group). The temperature difference between the two magmas is clarified by Mg/Fe partition between clinopyroxene and olivine, and Fe-Ti oxides geothermometer. The compositional zoning of minerals, such as normal zoning of olivine and magnesian clinopyroxene, and reverse zoning of orthopyroxene, indicate that the basaltic and dacitic-andesitic magmas were probably mixed in a magma reservoir immediately before eruption. It is suggested that the basaltic magma was supplied intermittently from a deeper part to the shallower magma reservoir, in in which dacitic-andesitic magma had been fractionating.     

Plagioclase lamellae in hypersthene,Tikkoatokhakh Bay,Labrador

Abundant lamellae of plagioclase are present in the (100) planes of hypersthene megacrysts in andesine anorthosite along Tikkoatokhakh Bay, northwest of Nain, Labrador. Spongy intergrowths of plagioclase in hypersthene also occur. Plagioclase lamellae have mean compositions ranging from An₄₃ to An₉₂, with extreme compositions from An₃₉ to An₉₇; the calcic compositions are the more abundant. Such lamellae are always accompanied in the hypersthene by grains or lamellar segments of magnetite, and rarely by lamellae of olivine, augite, magnetite, or ilmenite. Some calcic plagioclase lamellae contain antiperthitic spindles of orthoclase. The host rocks of the hypersthene megacrysts are layered leuconorites and anorthosites with mean plagioclase compositions ranging from An₄₁ to An₅₅. The plagioclase lamellae in hypersthene are characteristically much more calcic than the host-rock plagioclase. There is little doubt that the lamellae exsolved from a pyroxene host, dominantly by a coupled redox reaction which generated magnetite, thereby releasing silica to combine with the Ca-Tschermak and jadeite components of the precursor pyroxene. Rapid growth of megacrysts may account for their aluminous nature.     

Lunar sample 15405: Remnant of a KREEP basalt-granite differentiated pluton

Large, coarse-grained fragments of granite, containing plagioclase, a silica polymorph, potash feldspar, and exsolved pyroxene, with minor ilmenite, a phosphate, Fe-metal, and troilite, occur in sample 15405. A similar coarse-grained clast type (KREEP-rich quartz-monzodiorite) has a similar mineralogy but contains more ilmenite, large phosphates, less silica, and lacks troilite. One unusual KREEPy olivine vitrophyre fragment is also present. All the other fragments in 15405 are of Apollo 15-type KREEP basalt; ANT-suite and breccia fragments are conspicuously absent. The groundmass of 15405, of a KREEP basalt composition, is vesicular with a variolitic texture and is interpreted as an impact melt. Except for the olivine vitrophyre, the fragments are believed to be the remnants of a shallow-level KREEP basalt-granite differentiated pluton, in which granite was produced as the residual liquid without involvement of immiscibility effects.The large amount of melt required to produce the pluton, and the retention of the pluton's integrity from crystallization until the formation of the source boulder of 15405 suggest that KREEP basalt magma is not ancient (～4.3 b.y.), but was produced by the partial melting of the interior of the moon at around 3.90–3.95 b.y.; this conclusion is supported by the presence of KREEP basalt in soil breccia 15205, to the exclusion of other highland rock types. If this interpretation is correct, the source of Apollo 15-type KREEP basalt had a Rb/Sr ratio higher than anorthositic norite, commonly proposed as the source rock.     

Early lunar differentiation: 4.42-AE-old plagioclase clasts in Apollo 16 breccia 67435

We report on a⁴⁰Ar-³⁹Ar study of the Apollo 16 breccia 67435 and present ages of five samples representing matrix, lithic clasts and plagioclase clasts. While the matrix age spectrum does not have a well-defined plateau, the two lithic clasts gave plateau ages of 3.96 and 4.04 AE. Since all samples had apparent ages of ～1 AE in the fractions ≤600°C extraction temperature, the breccia might have been assembled in a rather mild process at about that time or even more recently out of material with different metamorphic ages. The two plagioclase samples, of which one was a single 9-mg mineral clast and the other a 15-mg composite of several clasts, also have ages of ～1 AE in the low-temperature release fractions, but are apparently undisturbed by any ～4-AE events since they both have well-defined plateaux at 4.42 AE. The age of these strongly calcic plagioclase clasts, believed to be remnants of the anorthositic lunar crust, establishes a lower age limit to the end of the early lunar differentiation and thus places a strong constraint to the lunar evolution.     

Mineralogy and petrology of the Abee enstatite chondrite breccia and its dark inclusions

The Abee E4 enstatite chondrite breccia consists of clasts (many rimmed by metallic Fe, Ni), dark inclusions and matrix. The clasts and matrix were well equilibrated by thermal metamorphism, as evidenced by uniform mineral compositions, recrystallized chondrules, low MnO content of enstatite and high abundance of orthoenstatite. The clasts acquired their metal-rich rims prior to this metamorphic episode. The occurrence in Abee of relatively unmetamorphosed dark inclusions, clasts with nearly random magnetic orientations and a matrix with a uniform magnetic orientation [18,19] indicates that clast and matrix metamorphism occurred prior to the agglomeration of the breccia.The dark inclusions are an unusual kind of enstatite chondritic material, distinguished from the clasts and matrix by their relative enrichments in REE [21–23], low relative abundances of kamacite, total metallic Fe, Ni and silica, lower niningerite/(total sulfide) ratios, high relative abundances of oldhamite and martensite, smaller euhedral enstatite, more heterogeneous enstatite and metallic Fe, Ni, more calcic enstatite and more nickeliferous schreibersite.We propose the following model for the petrogenesis of the Abee breccia: The maximum metamorphic temperature of breccia parent material was?- 840°C (the minimum temperature of formation of Abee niningerite) and perhaps near 950–1000°C (the Fe-Ni-S eutectic temperature). Euhedral enstatite crystals in metallic Fe, Ni- and sulfide-rich areas grew at these metamorphic temperatures into pliable metal and sulfide. Breccia parent material was impact-excavated from depth, admixed with dark inclusions and rapidly cooled (700 to 200°C in about 2 hours) [15]. During this cooling, clast and matrix material acquired thermal remanent magnetization. Random conglomeration of clasts and unconsolidated matrix materials caused the clasts to have random magnetic orientations and the matrix areas to have net magnetic intensities of zero (due to the cancellation of numerous randomly oriented magnetic vectors of equal intensity in the matrix). A subsequent ambient magnetic field imparted a uniform net magnetic orientation to the matrix and caused the magnetic orientations of the clasts to be somewhat less random. The Abee breccia was later consolidated, possibly by shock or by shallow burial and very long-period/low-temperature (< 215°C) metamorphism.     

Origin of iron-rich olivine in the matrices of type 3 ordinary chondrites: an experimental study

In order to understand the origin of iron-rich olivine in the matrices of type 3 ordinary chondrites, the reaction of metallic iron and enstatite, with and without forsterite and SiO₂, has been experimentally reproduced at temperatures between 1150° and 800°C and P_O2 between 10⁻¹¹ and 10⁻¹⁶ atm (between the IQF and MW buffers). The olivine produced ranges from Fo₅₈ to Fo₃₄ and this composition does not change significantly with temperature and time of the runs. The magnesian olivine which forms does become more magnesian with increasing forsterite/enstatite ratio of the starting materials. Iron-rich olivine (Fo< 35) cannot be formed by the reaction of enstatite and metallic iron, with or without forsterite as starting materials but it can be formed in the presence of free silica. The composition of olivine becomes more iron-rich with increasing silica/enstatite ratio. The compositional range of olivine formed from each mixture is 25–30 mole% Fo regardless of the temperature, composition, mineral assemblage, and run duration.From these experimental results, two possibilities suggested for the origin of the iron-rich olivine in the matrices of type 3 ordinary chondrites: (1) free silica must have been present if the iron-rich olivine was formed by solid-state reactions under oxidizing condition in the solar nebula; (2) reaction of silicon-rich gas with metallic iron took place under oxidizing condition in the solar nebula. Though it is difficult to define which alternative was dominant, the formation of free silica or silicon-rich gas may be a result of fractional condensation. This is possible if there is a reaction relation between forsterite and gas to produce enstatite. The suggested fractional condensation is supported by the fact that the compositions of the fine-grained matrices of type 3 ordinary chondrites are more silica-rich than the bulk compositions of the chondrites. Though it is not known whether such conditions were established all over the nebula or locally in the nebula, both fractionation and more oxidizing conditions than the average solar nebula are required for the formation of matrix olivine.     

月球表面主要矿物反射光谱特性研究

分析了矿物在可见光及近红外区光谱生成的机理,介绍了月球表面最为主要的四种矿物——辉石、斜长石、橄榄石、钛铁矿,并分析了它们各自光谱特征及生成原因,讨论了造成同种矿物光谱差异的原因,给出了它们各自的标志性特征。     

Composition and classification of clasts in the St. Mesmin LL chondrite breccia

Seven samples of the unique St. Mesmin meteorite have been analyzed by instrumental and radiochemical neutron activation analysis for Na, Ca, Sc, Cr, Mn, Fe, Co, Ni, Zn, Ga, Ge, Se, In, Sm, Yb, Ir and Au. St. Mesmin is unique in being the only ordinary chondrite known to contain an unmelted xenolith of another ordinary chondrite. Data for two host matrix samples and three light clasts are consistent with their classification as LL chondrite material. The composition of the large dark xenolith confirms earlier evidence that it is an H chondrite; volatile abundances are consistent with it being highly shocked, petrologic type-4 material. In an olivine microporphyry, siderophile abundances are mostly about 0.13 times LL abundances, an apparent indication of metal loss during the shock melting which produced the clast. As in other regolithic chondrites, the dark host has higher contents of highly volatile elements than do the light clasts. We suggest that this results from a combination of differences in intensity of preexisting metamorphism as well as a redistribution of volatiles during regolith gardening.The H-group xenolith in St. Mesmin is a relatively recent addition to the parent body (< 1.4 Ga ago), but it is argued that this does not require regolith activity at that time. Rather the view is supported that the regolith period occurred very early in the meteorite's history (&gsim;4.0 Ga ago) and may have been related to the growth of the parent body. The H-group fragment may be part of the projectile whose impact excavated the St. Mesmin meteoroid from the LL parent body.     

Early Oligocene alkaline lamprophyric dykes from the Jandaq area (Isfahan Province,Central Iran): Evidence of Central–East Iranian microcontinent confining oceanic crust subduction

The Jandaq lamprophyres occur as eight mostly parallel dykes, which cross‐cut Eocene volcanic and sedimentary rocks of the Pis‐Kuh Formation in dominant north to south direction. These lamprophyres are mainly composed of kaersutite, clinopyroxene, olivine, feldspar, ilmenite, and spinel as primary minerals. The rocks studied here are enriched in alkalis, TiO₂, large ion lithophile elements, and light rare‐earth elements (LREE), with SiO₂ content between 41.7 and 46.2 wt%, and are classified as camptonite and alkaline lamprophyre according to the mineralogical and chemical characteristics. These rocks exhibit positive Eu anomalies (Eu/Eu* = 1.08–1.39) and are characterized by strong enrichment in LREE relative to heavy REEs, and also by varied Zr/Hf ratios. The geochemical features of the rocks suggest that the lamprophyre magmas were derived from low‐degree melting of an amphibole garnet lherzolite that experienced strong metasomatism by carbonate‐rich fluids in response to dehydration melting from the subducted slab. The Jandaq lamprophyric magmatism has been attributed to the former subduction of the Central–East Iranian microcontinent confining oceanic crust from the Triassic to Eocene, and decompression melting induced by the extensional basin of the Jandaq area in the early Oligocene.