Study on topographic compensation model of the Okinawa Trough Ⅰ. Calculation of theoretical isostatic response function

Based on regional compensation and experimental isostasy, the calculating formula of theoretical isostatic response function is deduced when the loads on top correlate with loads from below.A variety of curves of theoretical isostatic response function were calculated with different effective elastic thickness of the plate and by using different proportions between loads on top and loads from below.And preliminary discussion is made on shapes of the curves.     

On the Interaction of Surface Waves with An Elastic Plate of Finite Length in Head Seas

An eigen-function expansion method based on a new orthogonal inner product is proposed by Sahoo et al. (2000) for the study of the hydroelastic response of mat-type VLFS in head seas. However, their main emphasis is on the effect of edge conditions and they assume that the plate is of a semi-infinite length. In reality, the plate is of finile length. For consider-alion of the finite length effect, the reflection and transmission from the other end must be considered. The effect of this reflection and transmission on the hydroelaslic response of VLFS is of interest for praclical application. Furthermore, the physi-cal meaning of the new inner producl was not given in their paper. In this paper, it is shown that the new inner product can be derived from the governing equation and the bottom boundary conditions. Then the same eigen-function expansion method is adopted for the study of the hydroelastic response of an elastic plate of finite length in surface waves. Delailed comparisons are made between the     

A Discusion on Limited Load-Carrying Capacity of Rectangular Plates

The elastic-plastic method is often used in designing the inner flat bulkhead plates of submarines, and the upper structure of ships and drilling platforms. Such bulkhead plates can bear the load only once. For the improvement of the load-carrying capacity or the reduction of the weight of plates, the yield line analytical method is employed in this paper to design the bulkhead plate to improve economy and increase the effiective load. Besides, a further sutdy of this method has been made theoretically and experimentally, and the data of the limited load-carrying capacity of the plate have been obtained. Furthermore, the safety coefficients for such a method are presented, which can be used as reference for related departments and staffs.     

Analytic Solution of Interaction Between Surface Waves and Floating Elastic Plates with Elastic End-Restraints

Based on the dynamic theories of water waves and Mindlin plates,the analytic solution of interaction between surface waves and two-dimensional floating elastic plates with edge-restraint is constructed by use of the Wiener-Hopf technique.Firstly,without regard for elastic edge restraint,the wave-induced responses of elastic floating plate analyzed by the present method are in good agreement with the results from literature and experimental results.Therefore,it can be shown that the present method is valid.Secondly,three end-restraint cases(i.e.,the left-end elastic restraints,the both-end elastic restraints,and the right-end elastic restraints)are proposed to reduce the vibration of floating plates,in which the spring is used to connect the sea bottom and the floating plate's left(or right)edge.The relations between the spring stiffness and the parameters of wave-induced responses of floating plates are discussed.Moreover,the effective method to reduce the vibration of floating elastic plates can be obtained through comparison.     

Coupled BEM-FEM Analysis of the Large-Diameter Cylinder Structure System

A method of coupled BEM-FEM analysis for the elastic spatial structure system is presented. It can be applied to the calculation of the stress and deformation of the large-diamater cylinder structure system and it is suitable for symmetric or non-symmetric structures under the distributed or concentrated load. Numerical examples show that the proposed method and computer program BEFEM are quite efficient in the analysis of the large-diameter cylinder structure problems in ocean engineering.     

Analytic Solution of Elasto-Plastic Stress in Infinite Slope under Uniform Load

-According to the Mohr-Coulomb yield criterion,the stress field of the infinite slope is derivedunder a vertical uniform load q on the top of the slope.It is indicated that elastic and elasto-plastic stateswould occur in the slope.When q is smaller than the critical load,q_p,the slope is in the elastic state.Ifq equals q_p,the slope is in the critical state,and the plastic deformation would occur along the critical an-gle.With the increase of q,the plastic zone would extend,and the slope is in the elasto-plastic state.Ifq equals limit load,the slope is in the limit equilibrium state.The slope may be divided into three zones.Some charts of the critical angle,the critical and limit load coefficients are presented in this paper.     

Rain-Flow and Reverse Rain-Flow Counting Method for the Compilation of Fatigue Load Spectrum

The rain-flow counting method is widely used to compile the fatigue load spectrum. The second stage counting of the rain-flow method is a troublesome process. In order to overcome this drawback, the rain-flow and reverse rain-flow counting method is proposed in this paper. In this counting method, the rule for counting of the rain-flow method is modified, so that the sequence of load-time need not be adjusted. This is a valid and useful method to count cycles and compile the load spectrum and it can be widely used in ocean engineering.     

Elemental geochemical records of seafloor hydrothermal activities in the sediments from the Okinawa Trough

The major and minor element contents in the sediment core H9 from the hydrothermal fields of the Okinawa Trough show a sharp change at the depth of 80 cm. The elements enriched in the upper 80 cm core are those enriched in the hydrothermal deposits and in the surface sediments recovered from the hydrothermal fields in the trough, which indicates the input of hydrothermal materials. Comparing with other hydrothermal sediments from Mid-ocean Ridges or the Lau Basin, the degree of the enrichment of elements iron, copper,cobalt, and nickel is relatively low. However, the enrichment of elements manganese, lead, arsenic, antimony and mercury is remarkable. The average contents of these elements in the upper 80 cm core sediments are three to six times those in the lower section, and 3~12 times those in the surface sediments which are not influenced by hydrothermal activities. Hydrothermal activities have contributed significant manganese, lead, arsenic, antimony and mercury to the sediments, and these elements are distinct indicators for the hydrothermal activity in the Okinawa Trough. The significant enrichment of these elements in Core H9 upward from the depth 80 cm indicates the start or the significant enhancing of the hydrothermal activity in this area at about 5 740 aB.P. The average accumulation rate of manganese during this period is about 40 461 μg/(cm2·ka), which is similar to the hydrothermal sediments in the Lau Basin or the East Pacific Rise.     

Application of method of fuzzy sets to the analysis of water masses in the northern South China Sea

Some methods of fuzzy sels are applied to the analysis of water masses in the north area of the South China Sea. In distinguishing water masses with the fuzzy clustering method, the authors propose a fuzzy similar relation based on Euclidean distance, and suggest a method for determining the number of water masses by the F-test, and further adjust rationally the boundaries of water masses and the membership relation of samples by the elastic classification method. Eight water masses are distinguished in the area, i.e., Nearshore Diluted Water F, Nearshore Mixed Water M, Warm Surface Water WS, Surface Water S, Surface-Subsurface Mixed Water SU, Subsurface Water U, Subsurface-Intermediate Mixed Water UI and Intermediate Water I. These point-sets of various water masseson the (?)-S diagram may be summed up in three types, that is, the deformed elliptical convexpoint-set, the half-boundless convex point-set and the point-set with single-side concave. For them, we have proposed methods of making their member     

Dynamic Plastic Response of Circular Plates Resting on Fluid with Finite Deformation

This paper concerns the dynamic plastic response of a circular plate resting on fluid subjectedto a uniformly distributed rectangular load pulse with finite deformation.It is assumed that the fluid isincompressible and inviscous,and the plate is made of rigid-plastic material and simply supported along itsedge.By using the method of the Hankel integral transformation,the nonuniform fluid resistance is de-rived as the plate and the fluid is coupled.Finally,an analytic solution for a circular plate under a mediumload is obtained according to the equations of motion of the plate with finite deformation.     

On the Vibration Reduction Effect of Offshore Platform Vibration Distribution Structure

Based on the Bohai ocean environment characteristics, a new platform vibration distribution structure is designed to reduce the platform vibration due to flowing ice. The effect of the earthquake wave and ocean wave load on this vibration distribution structure is considered in the design. The principal idea of this new vibration distribution structure is dividing the platform main column into the inner tube and the outer tube. The outer tube is connected with the leg pontoon by braces, while the inner tube is used to support the platform deck. The inner tube and outer tube can be connected or disconneted in the region near the water line. For evaluating the vibration reduction effect of such a structure, tests are carried out on a steel model, and the external load of flowing ice, earthquake wave and ocean wave are simulated by concentated random load applied to different points of the model. The tests are performed in water media and air media respectively. The vibration reduction effect is evaluated     

Recovery Behavior of the Propagating Buckle on Elastic Structures

Based on the beam system model used by Chater, Hutchinson and Neale (1982), the recovery behavior of propagating buckle on elastic structures is first found out from the computational results. As the representative of some elastic structures, the Chater-Hutchinson-Neale model indicates that once the buckle meets arresters, unlike the case in submarine pipelines, it will be reflected back to continue its propagation in a negative phase or a negative direction. The pressure which maintains the negative propagation, however, is as same as that required for the positive propagation. This fact has been examined in the experiment of the bulge propagation on a long elastic latex tube. The present discovery greatly supports the hypothesis that the buckle propagation coresponds to the coexisting phase of structures.     

Time Domain Simulation of Transient Responses of Very Large Floating Structures Under Unsteady External Loads

A time domain finite element method （FEM） for the analysis of transient elastic response of a very large floating structure （VLFS） subjected to arbitrary time-dependent external loads is presented. This method is developed directly in time domain and the hydrodynamic problem is formulated based on linear, inviscid and slightly compressible fluid theory and the structural response is analyzed on the thin plate assumption. The time domain finite element procedure herein is validated by comparing numerical results with available experimental data. Finally, the transient elastic response of a pontoon-type VLFS under the landing of an airplane is computed by the proposed time domain FEM. The time histories of the applied force and the position and velocity of an airplane during landing are modeled with data from a Boeing 747-400 jumbo jet.     

Response Characteristics of Load on Vessels in Waves

Considering the requirement of direct design and fatigue test for ships and floating structures byuse of FEM technique,a computational procedure of spectral analysis for wave load on the hull surface is de-veloped in this paper.The response of hydrodynamic pressure on the body surface to a designated sea state forships and floating structures is calculated by use of the revised strip method with the hull bound perturbationflow concept.The spectral function of wave load for the defined point on the body surface can be determinedfrom the Wiener-Khinhin theorem and the characteristic load value can be also obtained from spectral mo-ment analysis.A container ship is taken as a computational example and the sample of wave load with a cer-tain probability and corresponding encountered frequency is provided.     

Hydroelastic response of a circular plate in waves on a two-layer fluid of finite depth

The hydroelastic response of a circular, very large floating structure （VLFS）, idealized as a floating circular elastic thin plate, is investigated for the case of time-harmonic incident waves of the surface and interfacial wave modes, of a given wave frequency, on a two-layer fluid of finite and constant depth. In linear potential-flow theory, with the aid of angular eigenfunction expansions, the diffraction potentials can be expressed by the Bessel functions. A system of simultaneous equations is derived by matching the velocity and the pressure between the open-water and the plate-covered regions, while incorporating the edge conditions of the plate. Then the complex nested series are simplified by utilizing the orthogonality of the vertical eigenfunctions in the open-water region. Numerical computations are presentedto investigate the effects of different physical quantities, such as the thickness of the plate, Young＇s modulus, the ratios ofthe densities and of the layer depths, on the dispersion relations of the flexural-gravity waves for the two-layer fluid.Rapid convergence of the method is observed, but is slower at higher wave frequency. At high frequency, it is found that there is some energy transferred from the interfacial mode to the surface mode.     

Hydroelastic Response of A Circular Plate in Waves on A Two-Layer Fluid of Finite Depth

The hydroelastic response of a circular, very large floating structure (VLFS), idealized as a floating circular elastic thin plate, is investigated for the case of time-harmonic incident waves of the surface and interfacial wave modes, of a given wave frequency, on a two-layer fluid of finite and constant depth. In linear potential-flow theory, with the aid of angular eigenfunction expansions, the diffraction potentials can be expressed by the Bessel functions. A system of simultaneous equations is derived by matching the velocity and the pressure between the open-water and the plate-covered regions, while incorporating the edge conditions of the plate. Then the complex nested series are simplified by utilizing the orthogonality of the vertical eigenfunctions in the open-water region. Numerical computations are presented to investigate the effects of different physical quantities, such as the thickness of the plate, Young’s modulus, the ratios of the densities and of the layer depths, on the dispersion relations of the flexural-gravity waves for the two-layer fluid. Rapid convergence of the method is observed, but is slower at higher wave frequency. At high frequency, it is found that there is some energy transferred from the interfacial mode to the surface mode.     

Study on topographic compensation model of the Okinawa Trough I. Calculation of theoretical isostatic response function

INTRODUCTIONTo study the compensation model of sea topography and isostatic states by using toPOgraphicand gravity data, is an imPOrtant mean for further researching deep structures as elastic structure,stress state of lithosphere, and so on. Since Airy and Pratt proPOsed local isostatic model in the1850' s, greater development on the theoretical study has been attained. Veining Meinesz (1941 )introduced regional compensation mechanism by considering it as floating crust in elastic fie…     

The formation and tectonic evolution of Philippine Sea Plate and KPR

The Philippine Sea Plate has an extremely special tectonic background. As an oceanic plate, it is almost entirely surrounded by subduction zones with complex internal tectonic features. On the basis of enormous published literature, this paper offers a comprehensive overview of the tectonic and evolution history of the Philippine Basin and the Kyushu-Palau Ridge (KPR) in the Philippine Sea Plate, and discusses the geological features of KPR. Referring to relevant definitions of various "ridges" stipulated in United Nations Convention on the Law of the Sea, so the KPR is believed to be a remnant arc formed during the opening of the Parece Vela and Shikoku Basins in the Philippine Sea Plate. It is a submarine ridge on oceanic plate rather than a submarine elevation. And thus, it is not a natural component of the Japan continental margin.     

Investigation on the Deposition in an Excavated Trough at the East Shore of Jiaozhou Bay, China

- Based on field investigations, this paper analyzes three types of harbour basinns and navigation channel excavated on seabed in Jiaozhou Bay, get a general rule of deposition for excavated trough, it found that pollution is one of crucial factors resulting in the deposition of the excavated trough in the east shore of Jiaozhou Bay. With these results, it predicted the annual deposition thickness for the excavated trough and disclosed the fact that it can't be deposited deadly during one storm. At the same time, with two-dimensional numerical model, it studied the effects of the excavated trough and the reclamation near shore on tidal cureent and said that the excavated trough can decrease the current velocity passing through the trough about 10- 15%, but only limited inside and near the trough and there are no effect on other regions; reclamation can cut off the pollution sources and no obvious effect on the currents of the Jiaozhou Bay. Connecting the deep trough and Cangkou tidal channel with a new     

Prediction of Load-Displacement Curve of Flexible Pipe Carcass Under Radial Compression Based on Residual Neural Network

The carcass layer of flexible pipe comprises a large-angle spiral structure with a complex interlocked stainless steel cross-section profile, which is mainly used to resist radial load. With the complex structure of the carcass layer, an equivalent simplified model is used to study the mechanical properties of the carcass layer. However, the current equivalent carcass model only considers the elastic deformation, and this simplification leads to huge errors in the calculation results. In this st...