Boundary-layer parameterizations for applied dispersion modeling over urban areas

Many applied dispersion models require the knowledge of boundary-layer parameters such as sensible heat flux,Q _H , friction velocity,u _*, and turbulent energy components, _w and _v . Formulas are suggested for calculating these parameters over a wide variety of types of ground surfaces, based on simple observations of wind speed near the ground and fractional cloud cover, and specification of constants such as roughness length, albedo, and soil moisture availability. Observations ofu _*,Q _H , _w , and _v during field experiments in St. Louis and Indianapolis are used to test the formulas for urban sites. Relative errors of about ±20% in the predictions are seen to occur whenu _*,Q _H , _w , and _v are large. However, when these quantities are small (e.g.,u _* < 0.2 m/s), the errors in the predictions are as large as the mean value of the quantity itself.In addition, it is concluded from studies of available field data and theories that the magnitude of _w is not well-known at elevations above about 100m during the late afternoon and night. Some simple parameterizations for _w . are suggested that are consistent with the observed steady decrease in ground-level concentration in the afternoon and the sudden increase in concentration that can occur a few hours after sunset due to wind shears associated with a low-level jet, for continuous plumes emitted from moderate to tall stacks.     

The response of a propeller anemometer to turbulent flow with the mean wind vector perpendicular to the axis of rotation

The system transfer function ¦H(v)¦² at frequencyv (units of Hz) for a vertical velocity propeller anemometer in a statistically stationary and horizontally homogeneous turbulent flow is determined from: (1) experimental estimates of propeller velocity spectra; and (2) estimates of Eulerian vertical velocity spectra based on the hypothesis that degradation of the input vertical velocity Fourier components occurs in the inertial subrange. The experimental estimates of ¦H(v)¦² were adequately summarized with the mathematical expression for the system transfer function of a first-order system with parameterT which has units of time and is analogous to the time constant of a horizontal velocity propeller anemometer. Dimensional analysis techniques and the Monin-Obukhov similarity hypothesis were used to construct a model for the system parameterT which yielded the result that _w /D ₁ ( _w /)^1/3, where _w , andD ₁ denote the standard deviation of the input vertical velocity fluctuations, the horizontal mean wind speed, and the diameter of the propeller, respectively. The system parameterT is interpreted in terms of the time required for the propeller velocity statistics to become asymptotically independent of time upon being released from rest in a statistically stationary turbulent flow.Currently on leave of absence from the Indian Institute of Technology, New Delhi, India.     

Numerical simulation of particle trajectories in inhomogeneous turbulence,II: Systems with variable turbulent velocity scale

It is shown that for the purpose of trajectory simulation, the vertical velocityw _L (t) of a fluid element, which is moving in a system (such as a forest canopy, or the unstably stratified atmospheric surface layer) whose turbulent velocity scale _w is height-dependent, must be chosen from a frequency-distribution which is asymmetric aboutw _L = 0. If the gradient _w /z varies only slowly with height, correct trajectories may be obtained by adding a bias (where _L is the length scale) to a fluctuating velocity chosen from a symmetric distribution with variance _w ²(z).     

Final results of the CONDORS convective diffusion experiment

TheConvectiveDiffusionObserved byRemoteSensors (CONDORS) field experiment conducted at the Boulder Atmospheric Observatory used innovative techniques to obtain three-dimensional mappings of plume concentration fields, /Q, of oil fog detected by lidar and chaff detected by Doppler radar. It included extensive meteorological measurements and, in 1983, tracer gases measured at a single sampling arc. Final results from ten hours of elevated and surface release data are summarized here. Many intercomparisons were made. Oil fog /Q measured 40m above the arc are mostly in good agreement withSF ₆ values, except in a few instances with large spacial inhomogeneities over short distances. After a correction scheme was applied to compensate for the effect of its settling speed, chaff dy/Q agreed well with those of oil except in two cases of oil fog hot spots. Mass or frequency distribution vs. azimuth or elevation angle comparisons were made for chaff, oil, and wind, with mostly good agreements. Spacial standard deviations, _y and _z, of chaff and oil agree overall and are consistent at short range with velocity standard deviations _vand _w 0.6w^* (the convective scale velocity), as measured atz>100m. Surface release _y is enhanced up to 60% at smallx, consistent with the Prairie Grass measurements and with larger _v and reduced wind speed measured near the surface. Decreased _y at small dimensionless average times is also noted. Finally, convectively scaled dy, C _y, were plotted versus dimensionlessx andz for oil, chaff, and corrected chaff for each 30–60 min period. Aggregated CONDORSC _y fields compare well with laboratory tank and LES numerical simulations; surface-released oil fog compares expecially well with the tank experiments. However, large deviations from the norm occurred in individual averaging periods; these deviations correlated strongly with anomalies in measured distributions.On assignment to the US Environmental Protection Agency, Atmospheric Research and Exposure Assessment Laboratory, RTP, NC.     

Variability of surface roughness and turbulence intensities at a coastal site in India

Surface-layer features with different prevailing wind directions for two distinct seasons (Southwest Monsoon and Northeast Monsoon) on the west coast of India are studied using data obtained from tower-based sensors at a site located about 500 m from the coast. Only daytime runs have been used for the present analysis. The surface boundary-layer fluxes have been estimated using the eddy correlation method. The surface roughnessz ₀ obtained using the stability-corrected wind profiles (Paulson, 1970) has been found to be low for the Southwest monsson season. For the other season,z ₀ is relatively high. The drag coefficientC _D varies with height in the NE monsoon season but not in the season with lowz ₀. This aspect is reflected in the wind profiles for the two seasons and is discussed in detail. The scaling behaviour of friction velocityu _* and the turbulence intensity of longitudinal, lateral and vertical winds _u, _v and _w, respectively) are further examined to study their dependence on fetch. Our study shows that for the non-dimensional case, _u/u_* and _v/u_* do not show any surface roughness dependence in either season. On the other hand, for _w/u_* for the season with lowz ₀, the values are seen to agree well with that of Panofskyet al. (1977) for homogeneous terrain whereas for the other season with highz ₀, the results seem to conform more to the values observed by Smedman and Högström (1983) for coastal terrain. The results are discussed in the light of observations by other investigators.     

Statistics of Surface-Layer Turbulence Over Terrain with Metre-Scale Heterogeneity

Refuge has patchy vegetation in sandy soil. During midday and at night, the surface sources and sinks for heat and moisture may thus be different. Although the Sevilleta is broad and level, its metre-scale heterogeneity could therefore violate an assumption on which Monin-Obukhov similarity theory (MOST) relies. To test the applicability of MOST in such a setting, we measured the standard deviations of vertical (_w) and longitudinal velocity (_u), temperature (_t), and humidity (_q), the temperature-humidity covariance (¯tq), and the temperature skewness (S_t). Dividing the former five quantities by the appropriate flux scales (u_*, _*, and q_*) yielded the nondimensional statistics _w/u_*, _u/u_*, _t/|t_*|, _q/|q_*|, and ¯tq/t_*q_*. _w/u_*, _t/|t_*|, and S_t have magnitudes and variations with stability similar to those reported in the literature and, thus, seem to obey MOST. Though _u/u_* is often presumed not to obey MOST, our _u/u_* data also agree with MOST scaling arguments. While _q/|q_*| has the same dependence on stability as _t/|t_*|, its magnitude is 28% larger. When we ignore ¯tq/t_*q_* values measured during sunrise and sunset transitions – when MOST is not expected to apply – this statistic has essentially the same magnitude and stability dependence as (_t/t_*)². In a flow that truly obeys MOST, (_t/t_*)², (_q/q_*)², and ¯tq/t_*q_* should all have the same functional form. That (_q/q_*)² differs from the other two suggests that the Sevilleta has an interesting surface not compatible with MOST. The sources of humidity reflect the patchiness while, despite the patchiness, the sources of heat seem uniformly distributed.     

The use of σ T as a temperature scale in the atmospheric surface layer

The standard deviation of temperature _T is proposed as a temperature scale and as a velocity scale to describe the behaviour of turbulent flows in the Atmospheric Surface Layer (ASL), instead of _* andu _* of the Monin—Obukhov similarity theory, and ofT _f andU _f used for free convection stability conditions. On the basis of experimental evidence reported in the literature, it is shown that _T T _f andv _* U _f in the free convection region, and _{T *} andv _* U _* in nearneutral and stable conditions. This implies that the proposed scales can be applied for all stabilities. Furthermore, a new length scale is proposed and its relation with Obukhov length is given. Also, a simple semi-empirical expression is presented with which _T andv _* can be evaluated in a rather simple way. Some examples of practical applications are given, e.g., a stability classification for unstable conditions.     

Spatial Variability of Turbulent Fluxes in the Roughness Sublayer of an Even-Aged Pine Forest

The spatial variability of turbulent flow statistics in the roughness sublayer (RSL) of a uniform even-aged 14 m (= h) tall loblolly pine forest was investigated experimentally. Using seven existing walkup towers at this stand, high frequency velocity, temperature, water vapour and carbon dioxide concentrations were measured at 15.5 m above the ground surface from October 6 to 10 in 1997. These seven towers were separated by at least 100m from each other. The objective of this study was to examine whether single tower turbulence statistics measurements represent the flow properties of RSL turbulence above a uniform even-aged managed loblolly pine forest as a best-case scenario for natural forested ecosystems. From the intensive space-time series measurements, it was demonstrated that standard deviations of longitudinal and vertical velocities (_u, _w) and temperature (_T) are more planar homogeneous than their vertical flux of momentum (u_* ²) and sensible heat (H) counterparts. Also, the measured H is more horizontally homogeneous when compared to fluxes of other scalar entities such as CO₂ and water vapour. While the spatial variability in fluxes was significant (>15 %), this unique data set confirmed that single tower measurements represent the canonical structure of single-point RSL turbulence statistics, especially flux-variance relationships. Implications to extending the moving-equilibrium hypothesis for RSL flows are discussed. The spatial variability in all RSL flow variables was not constant in time and varied strongly with spatially averaged friction velocity u_*, especially when u_* was small. It is shown that flow properties derived from two-point temporal statistics such as correlation functions are more sensitive to local variability in leaf area density when compared to single point flow statistics. Specifically, that the local relationship between the reciprocal of the vertical velocity integral time scale (I_w) and the arrival frequency of organized structures (/h) predicted from a mixing-layer theory exhibited dependence on the local leaf area index. The broader implications of these findings to the measurement and modelling of RSL flows are also discussed.     

Sodar Detected Top-Down Convection in a Nocturnal Cloud-Topped Boundary Layer: A Case Study

Nocturnal convection, originating in a well-mixed marine cloud-topped boundary layer, advected onshore, was observed using a Doppler sodar on the Tyrrhenian coast in Italy. The horizontal and vertical dimensions of the downdrafts were evaluated. The oscillation frequency triggered by the downdrafts at the inversion layer, derived from the harmonic analysis of the sodar measured vertical velocity (w), is compared with the Brunt-Vaisala frequency, obtained from the rawinsonde temperature profile. A similarity function for the ²_w vertical profile was used to fit the sodar experimental data and to retrieve the depth of the mixing layer and the sensible heat flux at the top of the cloud layer. The results are in agreement with the convection layer depth observed in the sodar echoes facsimile record, and with the energy budget evaluated at the top of the cloud layer using the rawinsonde profiles.     

A quantitative comparison of horizontal and vertical acoustic sounding with in-situ measurements

In this paper, we present some results on an experiment to test the accuracy and utility of a horizontally-aimed acoustic sounder. A high-frequency, high-resolution mini-sounder was mounted on the mast of the Boulder Atmospheric Observatory aimed in the cross-wind direction. Measurements of C _T ², wind velocity and temperature and velocity variances were obtained under both stable and unstable conditions. These measurements were found to be in agreement with the equivalent values obtained, where appropriate, by the tower-fixed instrumentation and a vertically-pointed sounder, confirming the accuracy of the horizontal sounder. In addition, some information into the horizontal structure of plumes and gravity waves was obtained along with evidence of lack of excess attenuation at least for lengths within the unambiguous range of mini-sounders.     

Standard deviation of vertical two-point longitudinal velocity differences in the atmospheric boundary layer

The standard deviation of vertical two-point longitudinal velocity fluctuation differences is analyzed experimentally with eleven sets of turbulence measurements obtained at the NASA 150-m ground-winds tower site at Cape Kennedy, Florida. It is concluded that /u _*0 is proportional to (fz/u _*0)^0.22, where the coefficient of proportionality is a function of fz/u _*0 and u _*0/fL ₀. The quantities f and L₀ denote the Coriolis parameter and the surface Monin-Obukhov stability length, respectively; u _*0 is the surface friction velocity; z is the vertical distance between the two points over which the velocity difference is calculated; and zz is the mean height of the mid-point of the interval z above natural grade. The results of the analysis are valid for 20<-u _*0/fL ₀<2000.     

An atmospheric dispersion model with continuous vertical variation of dispersion parameters

Summary A dispersion model is proposed to predict the continuous vertical variation of the dispersion parameters _y and _z in case of hot pollutant release to the atmosphere. In such a case, the plume rises far above the ground and is subject to varying levels of turbulence. The framework in this paper can be divided into three approaches: (1) determination of the eddy diffusivitiesK _y (z, _y ) andK _z (z, _z ) as functions of height above ground and plume dimensions, (2) determination of both the plume rise and its vertical velocity using a modified version of Brigg's formula, and (3) numerical solution of actual problems with buoyant plumes at each time step. The model results have been applied to a case of pollutant release from fire destruction of a chemical storehouse roof.With 15 Figures     

Notes on an Internal Boundary-Layer Height Formula

The derivation of the Panofsky–Dutton internal boundary-layer(IBL) height formula has been revisited. We propose that the upwindroughness length (rather than downwind) should be used in theformula and that a turbulent vertical velocity (_w) ratherthan the surface friction velocity (u_*) should be considered asthe appropriate scaling for the rate of propagation ofdisturbances into the turbulent flow. A published set ofwind-tunnel and atmospheric data for neutral stratification hasbeen used to investigate the influence of the magnitude ofroughness change on the IBL height.     

Experiments On Buoyant Plume Dispersion In A Laboratory Convection Tank

Plume dispersion in the convective boundary layer (CBL) is investigated experimentally in a laboratory convection tank. The focusis on highly-buoyant plumes that loft near or become trapped in the CBL capping inversion and resistdownward mixing. Such plumes are defined by dimensionless buoyancy fluxes F_* 0.1, where F_* = F_b/(U w_* ² z_i), F_b is the stack buoyancy flux,U is the mean wind speed, w_* is the convective velocity scale, and z_i is the CBL depth. The aim is to obtain statistically-reliable mean (C) and root-mean-square (rms, _c) concentration fields as a function of F_* and the dimensionless distance X = w_*x/(U z_i), where x is the distance downstream of the source.The experiments reveal the following mainresults: (1) For 3 X 4and F_* 0.1, the crosswind-integrated concentration (CWIC) fields exhibit distinctly uniform profiles below z_i with a CWIC maximum aloft, in contrast to the nonuniform profiles obtained earlier by Willis and Deardorff. (2) The lateral dispersion (_y) variation with X is consistent with Taylor's theory for _* 0.1 and a buoyancy-enhanced dispersion, _y/z_i F_* ^1/3X^2/3, forF_* = 0.2 and 0.4. (3) The entrapment, the plume fraction above z_i, has a mean (E) that follows a systematic variationwith X and F_*, and a variability (_e/E) that is broad ( 0.3 to 2) near the source but subsides to 0.25 far downstream. (4) Vertical profiles of the concentration fluctuation intensity (c/C) are uniform for z < z_i and X > 1.5, but exhibit significant increases: (a) at the surface and close to the source (X 1.5), and(b) in the entrainment zone. (5) The cumulative distribution functions (CDFs) of the scaled concentration fluctuations (c/_c) separate into mixed-layer and entrainment-layer CDFs for X 2, with the mixed-layer group collapsing to a single distribution independent of z.These are the first experiments to obtain all components of the lateral and vertical dispersion parameters (rms meander, relative dispersion, total dispersion) for continuous buoyant releases in a convection tank. They also are the first tank experiments to demonstrate agreement with field observations of: (1) the scaled ground-level concentration along the plume centreline, and (2) the dimensionless lateral dispersion _y/z_i of buoyant plumes.     

A numerical modeling study of the marine boundary layer over the Gulf Stream during cold air advection

A two-dimensional mesoscale model has been developed to simulate the air flow over the Gulf Stream area where typically large gradients in surface temperature exist in the winter. Numerical simulations show that the magnitude and the maximum height of the mesoscale circulation that develops downwind of the Gulf Stream depends on both the initial geostrophic wind and the large-scale moisture. As expected, a highly convective Planetary Boundary Layer (PBL) develops over this area and it was found that the Gulf Stream plays an important role in generating the strong upward heat fluxes causing a farther seaward penetration as cold air advection takes place. Numerical results agree well with the observed surface fluxes of momentum and heat and the mesoscale variation of vertical velocities obtained using Doppler Radars for a typical cold air outbreak. Precipitation pattern predicted by the numerical model is also in agreement with the observations during the Genesis of Atlantic Lows Experiment (GALE).List of Symbols u east-west velocity [m s^–1] - v north-south velocity [m s^–1] - vertical velocity in coordinate [m s^–1] - w vertical velocity inz coordinate [m s^–1] - gq potential temperature [K] - q moisture [kg kg^–1] - scaled pressure [J kg^–1 K^–1] - U _g the east-south component of geostrophic wind [m s^–1] - V _g the north-south component of geostrophic wind [m s^–1] - vertical coordinate following terrain - x east-west spatial coordinate [m] - y north-south spatial coordinate [m] - z vertical spatial coordinate [m] - t time coordinate [s] - g gravity [m² s^–1] - E terrain height [m] - H total height considered in the model [m] - q _s saturated moisture [kg kg^–1] - p pressure [mb] - p ₀₀ reference pressure [mb] - P precipitation [kg m^–2] - vertical lapse rate for potential temperature [K km^–1] - L latent heat of condensation [J kg^–1] - C _p specific heat at constant pressure [J kg^–1 K^–1] - R gas constant for dry air [J kg^–1 K^–1] - R _v gas constant for water vapor [J kg^–1 K^–1] - f Coriolis parameter (2 sin ) [s^–1] - angular velocity of the earth [s^–1] - latitude [^o] - K _H horizontal eddy exchange coefficient [m² s^–1] - t integration time interval [s] - x grid interval distance inx coordinate [m] - y grid interval distance iny coordinate [m] - adjustable coefficient inK _H - subgrid momentum flux [m² s^–2] - subgrid potential temperature flux [m K s^–1] - subgrid moisture flux [m kg kg^–1 s^–1] - u _* friction velocity [m s^–1] - _* subgrid flux temperature [K] - q _* subgrid flux moisture [kg kg^–1] - w _* subgrid convective velocity [m s^–1] - z ₀ surface roughness [m] - L Monin stability length [m] - _s surface potential temperature [K] - k von Karman's constant (0.4) - v air kinematic viscosity coefficient [m² s^–1] - K _M subgrid vertical eddy exchange coefficient for momentum [m² s^–1] - K subgrid vertical eddy exchange coefficient for heat [m² s^–1] - K _q subgrid vertical eddy exchange coefficient for moisture [m² s^–1] - z _i the height of PBL [m] - h _s the height of surface layer [m]     

An aerosol climatology of Samoa

An atmospheric monitoring station is operated at Cape Matatula, American Samoa, by the Geophysical Monitoring for Climatic Change program under the National Oceanic and Atmospheric Administration. A nearly continuous record of condensation nucleus (CN) concentration and multiwavelength aerosol scattering extinction coefficient (_sp) is available from mid-1977 to the present. This report presents the 1977–1983 data. The long-term mean of CN concentration is 274 cm^-3 the long-term mean of _sp (550 nm) is 1.54×10^-5, and no significant long-term, annual, or diurnal trend is apparent in either data record.     

SODAR-based estimation of TKE and momentum flux profiles in the atmospheric boundary layer: Test of a parameterization model

Summary A simple parameterization for the estimation of turbulent kinetic energy (TKE) and momentum flux profiles under near-neutral stratification based on sodar measurements of the vertical velocity variance has been tested using data from the LINEX-2000 experiment. Measurements included operation of a phased-array Doppler sodar DSDPA.90 and of a sonic anemometer USA-1 mounted at a meteorological tower at a height of 90m. Good agreement has been found between the TKE and momentum flux values derived from the sonic and sodar data (with correlation coefficients r>0.90 and a slope of the regression lines of about 1.01.1) suggesting the possible use of sodar measurements of _w ² to derive turbulence parameter profiles above the tower range.     

Turbulence in a Katabatic Flow

Turbulence measurements performed in a stable boundary layer over the sloping ice surface of the Vatnajökull in Iceland are described. The boundary layer, in which katabatic forces are stronger than the large-scale forces, has a structure that closely resembles that of a stable boundary layer overlying a flat land surface, although there are some important differences. In order to compare the two situations the set-up of the instruments on an ice cap in Iceland was reproduced on a flat grass surface at Cabauw, the Netherlands. Wind speed and temperature gradients were calculated and combined with flux measurements made with a sonic anemometer in order to obtain the local stability functions _m and _h as a function of the local stability parameter z/L. Unlike the situation at Cabauw, where _m was linear as a function of z/L, in the katabatically forced boundary layer, the dependence of _m on stability was found to be non-linear and related to the height of the wind maximum. Thermal stratification and the depth of the stable boundary layer however seem to be rather similar under these two different forcing conditions.Furthermore, measurements on the ice were used to construct the energy balance. These showed good agreement between observed melt and components contributing to the energy balance: net radiation (supplying 55% of the energy), sensible heat flux (30%) and latent heat flux (15%).Local sources and sinks in the turbulent kinetic energy budget are summed and indicate a reasonable balance in near-neutral conditions but not in more stable situations. The standard deviation of the velocity fluctuations _u, _v, and _w, can be scaled satisfactorily with the local friction velocity u_* and the standard deviation of the temperature fluctuation with the local temperature scale _*.     

Canopy Architecture and Turbulence Structure in a Coniferous Forest

Synchronous sonic anemometric measurements at five heightswithin a mixed coniferous forest were used to test two different parameterisations ofcanopy architecture in the application of a second-order turbulence closure model. Inthe computation of the leaf drag area, the aerodynamic sheltering was replaced with anarchitectural sheltering, assumed to be analogous to the clumping index defined in radiativetransfer theory. Consequently, the ratio of leaf area density and sheltering factor was approximatedby the effective leaf area or the mean contact number, both obtained from the inversion of non-destructive optical measurements. The first parameter represents the equivalentrandomly dispersed leaf area in terms of shading, the second is the average number of leavesthat a straight line intercepts penetrating the canopy with a certain zenith angle. Theselection of this direction was determined by the analysis of the mean angle of the wind vectorduring sweep events. The drag coefficient values obtained from the inversion of themomentum flux equation, using the two proposed parameterisations, are in good agreement withvalues found in the literature. The predicted profiles of turbulence statistics reasonablymatch actual measurements, especially in the case of the mean contact numberparameterisation. The vertical profile of leaf drag area, obtained by forcing the turbulence modelto match the observed standard deviation of vertical velocity (_w), is intermediatebetween the two empirical ones. Finally, the proposed canopy parameterisations were appliedto a Lagrangian transport model to predict vertical profiles of air temperature, H₂O andCO₂ concentration.     

A general radar equation for the bistatic acoustic sounder

A radar equation which can be applied to any bistatic acoustic sounder is derived. The equation reduces to the expression normally used for the special case of the monostatic sounder. Numerical results using this equation are given for specific acoustic sounders, including the relative contributions to the scattering from the temperature and velocity parameters (C _T ² and C _V ²), the effect of wind speed on the scattered intensity and the measurement of horizontal wind velocity.Now with the Department of Electrical and Electronic Engineering, Portsmouth Polytechnic, Anglesea Road, Portsmouth PO1 3DJ.