Peak metamorphic temperatures in type 6 ordinary chondrites: An evaluation of pyroxene and plagioclase geothermometry

Abstract— Quantifying the peak temperatures achieved during metamorphism is critical for understanding the thermal histories of ordinary chondrite parent bodies. Various geothermometers have been used to estimate equilibration temperatures for chondrites of the highest metamorphic grade (type 6), but results are inconsistent and span hundreds of degrees. Because different geothermometers and calibration models were used with different meteorites, it is unclear whether variations in peak temperatures represent actual ranges of metamorphic conditions within type 6 chondrites or differences in model calibrations. We addressed this problem by performing twopyroxene geothermometry, using QUILF95, on the same type 6 chondrites for which peak temperatures were estimated using the plagioclase geothermometer (Nakamuta and Motomura 1999). We also calculated temperatures for published pyroxene analyses from other type 6 H, L, and LL chondrites to determine the most representative peak metamorphic temperatures for ordinary chondrites. Pyroxenes record a narrow, overlapping range of temperatures in H6 (865–926 °C), L6 (812–934 °C), and LL6 (874–945 °C) chondrites. Plagioclase temperature estimates are 96–179 °C lower than pyroxenes in the same type 6 meteorites. Plagioclase estimates may not reflect peak metamorphic temperatures because chondrule glass probably recrystallized to plagioclase prior to reaching the metamorphic peak. The average temperature for H, L, and LL chondrites (～900 °C), which agrees with previously published oxygen isotope geothermometry, is at least 50 °C lower than the peak temperatures used in current asteroid thermal evolution models. This difference may require minor adjustments to thermal model calculations.     

Porosity and density of ordinary chondrites: Clues to the formation of friable and porous ordinary chondrites

Abstract— Densities and porosities of meteorites are physical properties that can be used to infer characteristics of asteroid interiors. We report density and porosity measurements of 42 pieces of 30 ordinary chondrites and provide a quantification of the errors of the gas pycnometer method used in this study. Based on our measurements, we find that no significant correlation exists between porosity and petrologic grade, chemical group, sample mass, bulk and grain density, or shock level. To investigate variations in porosity and density between pieces of a meteorite, we examined stones from two showers, Holbrook and Pultusk. Examination of nine samples of Holbrook suggests relative homogeneity in porosity and density between pieces of this shower. Measurements of three samples of Pultusk show homogeneity in bulk density, in contrast to Wilkison and Robinson (2000), a study that reported significant variations in bulk density between 11 samples of Pultusk. Finally, examination of two friable ordinary chondrites, Bjurböle and Allegan, reveal variability in friability and porosity among pieces of the same fall. We suggest that friable ordinary chondrites may have formed in a regolith or fault zone of an asteroid.     

Equilibration temperatures of EL chondrites: A major downward revision in the ferrosilite contents of enstatite

Abstract A study of enstatite grains separated from EL6 chondrites shows ferrosilite contents to be ～0.02–0.04 mol%, about an order of magnitude lower than reported in the literature. The higher values reported earlier can probably be attributed to the excitation of Fe atoms in Fe-Ni and FeS, in part from μm-sized blebs of FeS and Fe-Ni commonly present in enstatite grains but mainly from large neighboring opaque grains excited by bremsstrahlung or by doubly backscattered electrons. Our EL6 ferrosilite contents are similar to those observed in coarse enstatite grains in some aubrites. The equilibrium between ferrosilite and Si-bearing kamacite is highly temperature dependent. At constant Si concentration in kamacite, the equilibrium ferrosilite mole fraction drops by a factor of roughly 2.5 for each 100 K decrease in the equilibrium temperature. As a result, the compositions of these two most common EL6 phases can be used to estimate metamorphic equilibration temperatures. The inferred temperatures are near 1200 K.     

Extraterrestrial chromite in latest Maastrichtian and Paleocene pelagic limestone at Gubbio,Italy: The flux of unmelted ordinary chondrites

Abstract— –The distribution of sediment‐dispersed extraterrestrial (ordinary chondritic) chromite (EC) grains (>63 μm) has been studied across the latest Maastrichtian and Paleocene in the Bottaccione Gorge section at Gubbio, Italy. This section is ideal for determining the accumulation rate of EC because of its condensed nature and well‐constrained sedimentation rates. In a total of 210 kg of limestone representing eight samples of 14–28 kg distributed across 24 m of the Bottaccione section, only 6 EC grains were found (an average of 0.03 EC grains kg^?1). In addition, one probable pallasitic chromite grain was found. No EC grains could be found in two samples at the Cretaceous‐Tertiary (K‐T) boundary, which is consistent with the K‐T boundary impactor being a carbonaceous chondrite or comet low in chromite. The average influx of EC to Earth is calculated to ～～0.26 grain m^?2 kyr^?1. This corresponds to a total flux of ～～200 tons of extraterrestrial matter per year, compared to ～～30,000 tons per year, as estimated from Os isotopes in deep‐sea sediments. The difference is explained by the EC grains representing only unmelted ordinary chondritic matter, predominantly in the size range from ～～0.1 mm to a few centimeters in diameter. Sedimentary EC grains can thus give important information on the extent to which micrometeorites and small meteorites survive the passage through the atmosphere. The average of 0.03 EC grain kg^?1 in the Gubbio limestone contrasts with the up to ～～3 EC grains kg^?1 in mid‐Ordovician limestone that formed after the disruption of the L chondrite parent body in the asteroid belt at ～～470 Ma. The two types of limestone were deposited at about the same rate, and the difference in EC abundance gives support for an increase by two orders of magnitude in the flux of chondritic matter directly after the asteroid breakup.     

The structure and composition of metal particles in two type 6 ordinary chondrites

Abstract— The purpose of this study is to examine, using light optical and electron optical techniques, the microstructure and composition of metal particles in ordinary chondritic meteorites. This examination will lead to the understanding of the low temperature thermal history of metal particles in their host chondrites. Two type 6 falls were chosen for study: Kernouvé (H6) and Saint Severin (LL6). In both meteorites, the taenite particles consisted of a narrow rim of high Ni taenite and a central region of cloudy zone similar to the phases observed in iron meteorites. The cloudy zone microstructure was coarser in Saint Severin than in Kernouvé due to the higher bulk Ni content of the taenite and the slower cooling rate, 3 K Ma^?1 vs. 17 K Ma^?1. Three microstructural zones were observed within the high Ni taenite region in both meteorites. The origin of the multiple zones is unknown but is most likely due to the high Ni taenite cooling into the two phase γ″ (FeNi) + γ′ (FeNi₃) region of the low temperature Fe-Ni phase diagram. Another explanation may be the presence of uniform size antiphase boundaries within the high Ni taenite. Finally, abnormally wide high Ni taenite regions are observed bordering troilite. The wide zones are probably caused by the diffusion of Ni from troilite into the high Ni taenite borders at low cooling temperatures.     

The porosities of ordinary chondrites: Models and interpretation

Abstract— Densities and porosities for 285 ordinary chondrites have been assembled and analyzed. Measured chondrite porosities are bimodal; finds have an average porosity of <3%, whereas fall porosities average 7% but range from zero to >30%. We conclude that mild degrees of weathering fill pore spaces, lowering grain densities and porosities without significantly changing the bulk size or mass of the sample. By assuming an original pristine grain density (as a function of the meteorite's mineralogy—determined by its class), we can derive model pristine porosities. These model porosities cluster around an average value of 10% for all classes of ordinary chondrites. Ordinary chondrites do not show any correlation of porosity (model or measured) with petrographic grade or sample size (over a range from 0.2 g to 2 kg). However, we do see a correlation between shock state and porosity. Shock-blackened meteorites are less porous than other meteorites. Furthermore, less severely shocked meteorites show a much broader range of porosities, with the maximum porosity seen among meteorites of a given shock class falling linearly as a function of that shock class. This is consistent with the idea that shock compresses and closes pore space. Analysis of meteorite porosity provides a lower bound to the fine-scale porosity of asteroids. Our densities, even with 10% primordial porosity, are significantly higher than inferred densities of possible asteroid parent bodies. These asteroids are probably loose piles of rubble.     

Occurrence of noble metals in aluminum- and chromium- rich objects in ordinary chondrites and of baddeleyite (ZrO2) in a chromite inclusion

Abstract— Platinum group elements (PGE) enrichments are found in Fe-Ni blebs (<1 μm) in Al- and Cr-rich objects in the ordinary chondrites Ste. Marguerite, Forest Vale, Montferré. In Ste. Marguerite, high ZrO₂ concentrations (baddeleyite) are also present in a chromite inclusion. Iridium enrichment in this material compared to its metal content is confirmed by INAA. The widespread occurrence of PGE in Al- and Cr-rich objects, mostly present in H-group chondrites of nearly equilibrated types, must be taken into account to understand their conditions of formation.     

The onset of metamorphism in ordinary and carbonaceous chondrites

Abstract— Ordinary and carbonaceous chondrites of the lowest petrologic types were surveyed by X‐ray mapping techniques. A variety of metamorphic effects were noted and subjected to detailed analysis using electron microprobe, scanning electron microscopy (SEM), transmission electron microscopy (TEM), and cathodoluminescence (CL) methods. The distribution of Cr in FeO‐rich olivine systematically changes as metamorphism increases between type 3.0 and type 3.2. Igneous zoning patterns are replaced by complex ones and Cr‐rich coatings develop on all grains. Cr distributions in olivine are controlled by the exsolution of a Cr‐rich phase, probably chromite. Cr in olivine may have been partly present as tetrahedrally coordinated Cr³⁺. Separation of chromite is nearly complete by petrologic type 3.2. The abundance of chondrules showing an inhomogeneous distribution of alkalis in mesostasis also increases with petrologic type. TEM shows this to be the result of crystallization of albite. Residual glass compositions systematically change during metamorphism, becoming increasingly rich in K. Glass in type I chondrules also gains alkalis during metamorphism. Both types of chondrules were open to an exchange of alkalis with opaque matrix and other chondrules. The matrix in the least metamorphosed chondrites is rich in S and Na. The S is lost from the matrix at the earliest stages of metamorphism due to coalescence of minute grains. Progressive heating also results in the loss of sulfides from chondrule rims and increases sulfide abundances in coarse matrix assemblages as well as inside chondrules. Alkalis initially leave the matrix and enter chondrules during early metamorphism. Feldspar subsequently nucleates in the matrix and Na re‐enters from chondrules. These metamorphic trends can be used to refine classification schemes for chondrites. Cr distributions in olivine are a highly effective tool for assigning petrologic types to the most primitive meteorites and can be used to subdivide types 3.0 and 3.1 into types 3.00 through 3.15. On this basis, the most primitive ordinary chondrite known is Semarkona, although even this meteorite has experienced a small amount of metamorphism. Allan Hills (ALH) A77307 is the least metamorphosed CO chondrite and shares many properties with the ungrouped carbonaceous chondrite Acfer 094. Analytical problems are significant for glasses in type II chondrules, as Na is easily lost during microprobe analysis. As a result, existing schemes for chondrule classification that are based on the alkali content of glasses need to be revised.     

Black ordinary chondrites: An analysis of abundance and fall frequency

Abstract— Black ordinary chondrite meteorites sample the spectral effects of shock on ordinary chondrite material in the space environment. Since shock is an important regolith process, these meteorites may provide insight into the spectral properties of the regoliths on ordinary chondrite parent bodies. To determine how common black chondrites are in the meteorite collection and, by analogy, the frequency of shock-alteration in ordinary chondrites, several of the world's major meteorite collections were examined to identify black chondrites. Over 80% of all catalogued ordinary chondrites were examined and, using an optical definition, 61 black chondrites were identified. Black chondrites account for approximately 13.7% of ordinary chondrite falls. If the optically altered gas-rich ordinary chondrites are included, the proportion of falls that exhibit some form of altered spectral properties increases to 16.7%. This suggests that optical alteration of asteroidal material in the space environment is a relatively common process.     

A survey of clasts and large chondrules in ordinary chondrites

Abstract— We report the results of a survey of clasts and large (>5 mm) chondrules (macrochondrules) within the 833 ordinary chondrites of the Natural History Museum collection. Thirty-six macrochondrules and 24 clasts were identified and studied. Macrochondrules have textures and mineral assemblages like normal chondrules and so share a common origin. Clasts show evidence for fracturing from larger bodies and can be classified as either: (1) chemically fractionated if they have major and trace-element compositions differing substantially from most chondrules and clasts; (2) impact melt clasts if they have microporphyritic textures and signs that indicate they are derived from shock-melted chondritic material; (3) microporhyritic clasts if they are similar to the last category but lack evidence for derivation through shock melting; or (4) indeterminate clasts forming a diverse class that includes all those clasts that do not fit into the other categories.     

Sodic plagioclase thermometry of type 6 ordinary chondrites: Implications for the thermal histories of parent bodies

Abstract— The structural states of sodic plagioclase crystals of ～50 μm in size from three H6, two L6, and one LL6 chondritic meteorites have been determined by measuring the Δ131 parameter with a Gandolfi camera after analyzing chemical compositions. The temperature for each sodic plagioclase crystal has been determined by plotting the Δ131 parameter, corrected for the influence of K, on the relation diagram between the Δ131 parameter and the temperature of synthesis of sodic plagioclase by Smith (1972). The temperature obtained is assigned to the crystallization temperature of sodic plagioclase, and the maximum plagioclase temperature for each meteorite can be assumed to correspond to the maximum temperature attained by each meteorite during metamorphism. The maximum metamorphic temperatures estimated are 725–742 °C for the H6 chondrites, 808–820 °C for the L6 chondrites, and 800 °C for the LL6 chondrite. These temperatures are lower than those based on Ca contents of clinopyroxenes (Dodd, 1981; McSween et al., 1988) but are consistent with those based on Ca contents of orthopyroxenes (McSween and Patchen, 1989; Langenhorst et al., 1995; Jones, 1997). The K content of sodic plagioclase correlates with the temperature obtained from the structural state. This positive correlation suggests that sodic plagioclase has formed in the course of equilibration processes of alkali elements in prograde metamorphism (i.e., during heating processes). The results of this study (i.e., the maximum metamorphic temperature of the H6 chondrites is lower than that of the L6 chondrites by ～80 °C, and meteorites of the same chemical group show very similar maximum metamorphic temperatures) are in accordance with the predictions of calculations based on the ²⁶Al heat source and the onion-shell structure model of the parent bodies.     

Fe‐Ni metal in primitive chondrites: Indicators of classification and metamorphic conditions for ordinary and CO chondrites

Abstract— We report the results of our petrological and mineralogical study of Fe‐Ni metal in type 3 ordinary and CO chondrites, and the ungrouped carbonaceous chondrite Acfer 094. Fe‐Ni metal in ordinary and CO chondrites occurs in chondrule interiors, on chondrule surfaces, and as isolated grains in the matrix. Isolated Ni‐rich metal in chondrites of petrologic type lower than type 3.10 is enriched in Co relative to the kamacite in chondrules. However, Ni‐rich metal in type 3.15–3.9 chondrites always contains less Co than does kamacite. Fe‐Ni metal grains in chondrules in Semarkona typically show plessitic intergrowths consisting of submicrometer kamacite and Ni‐rich regions. Metal in other type 3 chondrites is composed of fine‐ to coarse‐grained aggregates of kamacite and Ni‐rich metal, resulting from metamorphism in the parent body. We found that the number density of Ni‐rich grains in metal (number of Ni‐rich grains per unit area of metal) in chondrules systematically decreases with increasing petrologic type. Thus, Fe‐Ni metal is a highly sensitive recorder of metamorphism in ordinary and carbonaceous chondrites, and can be used to distinguish petrologic type and identify the least thermally metamorphosed chondrites. Among the known ordinary and CO chondrites, Semarkona is the most primitive. The range of metamorphic temperatures were similar for type 3 ordinary and CO chondrites, despite them having different parent bodies. Most Fe‐Ni metal in Acfer 094 is martensite, and it preserves primary features. The degree of metamorphism is lower in Acfer 094, a true type 3.00 chondrite, than in Semarkona, which should be reclassified as type 3.01.     

Asteroid 6 Hebe: The probable parent body of the H-type ordinary chondrites and the IIE iron meteorites

Abstract— The S(IV)-type asteroid 6 Hebe is identified as the probable parent body of the H-type ordinary chondrites and of the IIE iron meteorites. The ordinary chondrites are the most common type of meteorites falling to Earth; but prior to the present study, no large mainbelt source bodies have been confirmed. Hebe is located adjacent to both the v₆ and 3:1 resonances and has been previously suggested as a major potential source of the terrestrial meteorite flux. Hebe exhibits subtle rotational spectral variations, indicating the presence of some compositional variations across its surface. The silicate portion of the surface assemblage of Hebe is consistent (both in overall average and in its range of variation) with the silicate components in the suite of H-type chondrites. The high albedo of Hebe rules out a lunar-style space weathering process to produce the weakened absorption features and reddish spectral slope in the S-type spectrum of Hebe. Linear unmixing models show that a typical Ni-Fe metal spectrum is consistent with the component that modifies an H-chondrite spectrum to produce the S-type spectrum of Hebe. On the basis of the association between the H chondrites and the HE iron meteorites, our model suggests that large impacts onto the relatively metal-rich H-chondrite target produced melt bodies (sheets or pods) that differentiated to form thin, laterally extensive near-surface layers of Ni-Fe metal. Fragments of the upper silicate portions of these melt bodies are apparently represented by some of the igneous inclusions in H-chondrite breccias. Alternately, masses of metal could have been deposited on the surface of Hebe by the impact of a core or core fragment from a differentiated parent body of H-chondrite composition. Subsequent impacts preferentially eroded and depleted the overlying silicate and regolith components, exposing and maintaining large masses of metal at the optical surface of Hebe. In this interpretation, the nonmagmatic IIE iron meteorites are samples of the Ni-Fe metal masses on the surface of Hebe, whereas the H chondrites are samples from between and/or beneath the metal masses.     

Nanodiamonds and silicate minerals in ordinary chondrites as determined by micro‐Raman spectroscopy

We present here the Raman spectroscopic study of silicate and carbonaceous minerals in three ordinary chondrites with the aim to improve our understanding the impact process including the peak metamorphic pressures present in carbon‐bearing ordinary chondites. The characteristic Raman vibrational peaks of olivines, pyroxenes, and plagioclase have been determined on three ordinary chondrites from India, Dergaon (H5), Mahadevpur (H4/5), and Kamargaon (L6). The Raman spectra of these meteorite samples show the presence of nanodiamonds at 1334–1345 cm^?1 and 1591–1619 cm^?1. The full‐width at half maximum (FWHM) of Raman peaks for Mahadevpur and Dergaon reflect the nature of shock metamorphism in these meteorites. The frequency shift in Raman spectra might be because of shock effects during the formation of the diamond/graphite grains.     

Molecular and isotopic indicators of alteration in CR chondrites

Abstract— The CR group of carbonaceous chondrites may represent some of the most primitive extraterrestrial materials available for analysis. However, in contrast to other chondrite groups, the CR organic fraction is poorly characterized. The carbonaceous chondrite literature shows that relatively anhydrous thermal processing results in a condensed, poorly alkylated, O‐poor macromolecular material, while for aqueous processing the converse is true. Such characteristics can be used to discern the alteration histories of the carbonaceous chondrites. We have performed bulk elemental and isotopic analysis and flash pyrolysis on four CR chondrites (Renazzo, Al Rais, Elephant Moraine [EET] 87770, and Yamato [Y‐] 790112) to determine the nature of their organic component. Renazzo, Al Rais, and Y‐790112 release qualitatively similar pyrolysis products, although there are some variations. Al Rais' macromolecular structure contains substantially higher relative abundances of alkylated and oxidized species and relatively lighter δ¹⁵N, suggesting that it has endured more extensive aqueous processing than the other CR chondrites. Renazzo appears relatively unprocessed, with a low degree of alkylation, a lack of detectable nitrogen‐bearing components, and low methylnaphthalene ratio. EET 87770's low abundance of alkylated species suggests its macromolecular structure may be relatively condensed, with condensation potentially assisted by a period of mild thermal alteration.     

Shock features in iron-nickel metal and troilite of L-group ordinary chondrites

Abstract— Shock metamorphic features in opaque minerals (FeNi metal and troilite) of 22 L chondrites have been studied petrographically and geochemically in an attempt to establish a connection between the present silicate-based shock classification scheme (Stöffler et al., 1991) and the peak-shock and postshock thermal history recorded in these minerals. Unshocked to weakly shocked (S1–S3) L chondrites contain FeNi metal and troilite that display textures related to normal, slow cooling. They may also contain rare disequilibrium shock features, which suggest localized departures from equilibrium shock conditions. Above shock stage S3, selected melting of FeNi metal and troilite produces melt droplets whose composition and abundance correspond to the maximum equilibrium shock state achieved by the sample. At these higher shock levels, the abundance of other shock-induced features, such as polycrystalline kamacite, sheared and fizzed troilite, coarse-grained pearlitic plessite, polycrystalline troilite, and polymineralic melt veins serve as textural criteria that can be used to establish peak-shock conditions. Minimum postshock temperatures obtained from analyses of plessite components show a systematic increase in temperature with an increase in shock stage, thereby providing additional information about the postshock thermal histories of L chondrites. At the highest shock levels recorded in L chondrites (S6 and above), melting and chemical homogenization of FeNi metal produces flattened Ni profiles that may partially to completely obscure any evidence for an earlier, slow-cooling history. All of these features serve as aids for shock classifying L chondrites as well as for quantifying minimum peak temperatures that resulted during shock metamorphism.     

Systematics of Mössbauer absorption areas in ordinary chondrites and applications to a newly fallen meteorite in Jodhpur,India

Abstract— Mössbauer absorption areas corresponding to ⁵⁷Fe in olivine, pyroxene, troilite, and the metallic phase in ordinary chondrites are shown to exhibit certain systematic behaviors. H chondrites occupy 2 distinct regions on the plot of metallic phase absorption area versus silicate absorption area, while L/LL chondrites fall in a separate region. Similar separation is also observed when pyroxene absorption area is plotted against olivine absorption area. The one‐dimensional plot for the ratio of olivine area to pyroxene area separates L and LL chondrites. Based on these systematics, a newly fallen meteorite at Jodhpur, India is suggested to be an LL chondrite.     

Microstructures of metal grains in ordinary chondrites: Implications for their thermal histories

Abstract— This paper reports one of the first attempts to investigate by analytical transmission electron microscopy (ATEM) the microstructures and compositions of Fe‐Ni metal grains in ordinary chondrites. Three ordinary chondrites, Saint Séverin (LL6), Agen (H5), and Tsarev (L6) were selected because they display contrasting microstructures, which reflects different thermal histories. In Saint Séverin, the microstructure of the Ni‐rich metal grains is due to slow cooling. It consists of a two‐phase assemblage with a honeycomb structure resulting from spinodal decomposition similar to the cloudy zone of iron meteorites. Microanalyses show that the Ni‐rich phase is tetrataenite (Ni = 47 wt%) and the Ni‐poor phase, with a composition of ～25% Ni, is either martensite or taenite, these two occurring adjacent to each other. The observation that the Ni‐poor phase is partly fcc resolves the disagreement between previous transmission electron microscopy (TEM) and Mössbauer studies on iron meteorites and ordinary chondrite metal. The Ni content of the honeycomb phase is much higher than in mesosiderites, confirming that mesosiderites cooled much more slowly. The high‐Ni tetrataenite rim in contact with the cloudy zone displays high‐Ni compositional variability on a very fine scale, which suggests that the corresponding area was destabilized and partially decomposed at low temperature. Both Agen and Tsarev display evidence of reheating and subsequent fast cooling obviously related to shock events. Their metallic particles mostly consist of martensite, the microstructure of which depends on local Ni content. Microstructures are controlled by both the temperature at which martensite forms and that at which it possibly decomposes. In high‐Ni zones (>15 wt%), martensitic transformation started at low temperature (<300 °C). Because no further recovery occurred, these zones contain a high density of lattice defects. In low‐Ni zones (<15 wt%), martensite grains formed at higher temperature and their lattice defects recovered. These martensite grains present a lath texture with numerous tiny precipitates of Ni‐rich taenite (Ni = 50 wt%) at lath boundaries. Nickel composition profiles across precipitate‐matrix interfaces show that the growth of these precipitates was controlled by preferential diffusion of Ni along lattice defects. The cooling rates deduced from Ni concentration profiles and precipitate sizes are within the range 1–10 °C/year for Tsarev and 10–100 °C/year for Agen.     

An analytical electron microscopy (AEM) investigation of opaque inclusions in some type 6 ordinary chondrites

Abstract— A large number of ordinary chondrites contains micron-sized particles of metal and/or troilite dispersed in their silicate grains. Such metallic phases are responsible for the so-called darkening of the silicate grains and might be either precipitates, which formed during reduction of the silicates, or inclusions injected as a melt during a shock event. We have investigated these tiny foreign phases by analytical transmission electron microscopy in three unweathered, metamorphosed ordinary chondrites (Saint Séverin, LL6, Tsarev, L6 and Kernouvé, H6). We also looked for remnant shock indices. Our TEM observations suggest the following sequence of events in the three meteorites. First, a number of relatively strong shock events occurred on the parent body/bodies producing an Fe-FeS melt that was injected into silicate grains along a dense network of open fractures. Most of these shock defects were subsequently erased by high-temperature (700–900 °C) thermal metamorphism. Some remnants of the shock events are the observed trails of tiny metal and/or sulfide inclusions that formed as a result of fracture healing. Chemical homogenization of the silicates and limited oxidation of the metallic blebs also occurred during this high-temperature annealing event, resulting in Ni-rich inclusions. This effect was especially pronounced in the L and LL-chondrites studied. During subsequent cooling of the body/bodies, inclusions of chromite and phosphate precipitated, nucleating preferentially on lattice defects (dislocations, subgrain boundaries) and on the metal and sulfide inclusions. A later shock event of moderate intensity, probably corresponding to the separation of the meteorite from its parent body, produced new shock features in the silicate grains of the Saint Séverin meteorite, including mechanical twins in diopside and straight free screw dislocations in olivine.     

Feldspar in type 4–6 ordinary chondrites: Metamorphic processing on the H and LL chondrite parent bodies

Abstract– We have carried out a study of feldspar compositions in a suite of H and LL ordinary chondrites, of petrologic types 4, 5, and 6, in order to examine the process of recrystallization and equilibration of feldspar as the degree of metamorphism increases. In the H chondrites, there is little variation in feldspar compositions among the petrologic types, suggesting that homogenization of chondrule mesostasis, from which feldspar is presumed to have crystallized, occurred before feldspar crystallization began. The LL chondrites we studied are more complex. In Bjurböle (L/LL4), plagioclase in individual relict chondrules has distinct compositions, with a range of An/Ab ratios and low Or contents. This heterogeneity is most likely attributable to original compositional heterogeneity among chondrule mesostases: localized recrystallization of mesostasis must have occurred before diffusional equilibration took place. In Tuxtuac (LL5), the An/Ab ratio of plagioclase is more homogeneous, and plagioclase includes a significant Or component. In addition, we observe what appears to be exsolution of K‐feldspar from albitic host grains. In Saint Séverin (LL6), the An/Ab ratio of plagioclase is homogeneous, but plagioclase compositions show a range of Or contents, corresponding to a patchy distribution of K in individual feldspar grains. The observations in these LL chondrites are difficult to interpret with a simple model of progressive equilibration with increasing petrologic type. We suggest that the current criteria for assigning petrologic types are poorly defined: it is possible that the assigned petrologic types of these chondrites do not correlate with their peak temperatures. We propose that feldspar compositions might record conditions during the heating stage of metamorphism, and that the early stages of metamorphism may have occurred in the presence of fluids, rather than under the dry conditions that are commonly assumed.