Platinum-group element distribution in the oxidized Main Sulfide Zone, Great Dyke, Zimbabwe

In the Great Dyke mafic/ultramafic layered intrusion of Zimbabwe, economic concentrations of platinum-group elements (PGE) are restricted to sulfide disseminations in pyroxenites of the Main Sulfide Zone (MSZ). Oxidized ores near the surface constitute a resource of ca. 400 Mt. Mining of this ore type has so far been hampered due to insufficient recovery rates. During the oxidation/weathering of the pristine ores, most notably, S and Pd are depleted, whereas Cu and Au are enriched. The concentrations of most other elements (including the other PGE) remain quite constant. In the oxidized MSZ, PGE occur in different modes: (1) as relict primary PGM (mainly sperrylite, cooperite, and braggite), (2) in solid solution in relict sulfides (dominantly Pd in pentlandite, up to 6,500 ppm Pd and 450 ppm Pt), (3) as secondary PGM neoformations (i.e., Pt–Fe alloy and zvyagintsevite), (4) as PGE oxides/hydroxides that replace primary PGM as the result of oxidation, (5) hosted in weathering products, i.e., iron oxides/hydroxides (up to 3,600 ppm Pt and 3,100 ppm Pd), manganese oxides/hydroxides (up to 1.6 wt.% Pt and 1,150 ppm Pd), and in secondary phyllosilicates (up to a few hundred ppm Pt and Pd). In the oxidized MSZ, most of the Pt and Pd are hosted by relict primary and secondary PGM; subordinate amounts are found in iron and manganese oxides/hydroxides. The amount of PGE hosted in solid solution in sulfides is negligible. Considerable local variations in the distribution of PGE in the oxidized ores complicate a mineralogical balance. Experiments to evaluate the PGE recovery from oxidized MSZ ore show that using physical concentration techniques (i.e., electric pulse disaggregation, hydroseparation, and magnetic separation), the PGE are preferentially concentrated into smaller grain size fractions by a factor of 2. Highest PGE concentrations occur in the volumetrically insignificant magnetic fraction. This indicates that a physical preconcentration of PGE is not feasible and that chemical, bulk-leaching methods need to be developed in order to successfully recover PGE from oxidized MSZ ore.     

Assemblages and genesis of platinum-group minerals in low-sulfide ores of the monchetundra deposit,Kola Peninsula,Russia

New data on the composition, assemblages, and formation conditions of platinum-group minerals (PGM) identified in platinum-group element (PGE) occurrences of the Monchetundra intrusion (2495 +- 13 to 2435 ± 11 Ma) are described. This intrusion is a part of the Paleoproterozoic pluton of the Monche-Chuna-Volch’i and Losevy tundras located in the Pechenga-Imandra-Varzuga Rift System. The rhythmically layered host rocks comprise multiple megarhythms juxtaposed to mylonite zones and magmatic breccia and injected by younger intrusive rocks in the process of intense and long magmatic and fluid activity in the Monchetundra Fault Zone. The primary PGM and later assemblages that formed as a result of replacement of the former have been identified in low-sulfide PGE occurrences. More than 50 minerals and unnamed PGE phases including alloys, Pt and Pd sulfides and bismuthotellurides, PGE sulfarsenides, and minerals of the Pd-As-Sb, Pd-Ni-As, and Pd-Ag-Te systems have been established. The unnamed PGE phases—Ni₆Pd₂As₃, Pd₆AgTe₄, Cu₃Pt, Pd₂NiTe₂, and (Pd, Cu)₉Pb(Te, S)₄—are described. The primary PGM were altered due to the effect of several mineral-forming processes that resulted in the formation of micro- and nanograins of Pt and Pd alloys, sulfides, and oxides, as well as in the complex distribution of PGE, Au, and Ag mineral assemblages. New types of complex Pt and Pd oxides with variable Cu and Fe contents were identified in the altered ores. Pt and Pd oxides as products of replacement of secondary Pt-Pd-Cu-Fe alloys occur as zonal and fibrous nanoscale Pt-Pd-Cu-Fe-(±S)-O aggregates.     

Platinum-group minerals from the Jinbaoshan Pd–Pt deposit,SW China: evidence for magmatic origin and hydrothermal alteration

The Jinbaoshan Pt–Pd deposit in Yunnan, SW China, is hosted in a wehrlite body, which is a member of the Permian (∼260 Ma) Emeishan Large Igneous Province (ELIP). The deposit is reported to contain one million tonnes of Pt–Pd ore grading 0.21% Ni and 0.16% Cu with 3.0 g/t (Pd + Pt). Platinum-group minerals (PGM) mostly are ∼10 μm in diameter, and are commonly Te-, Sn- and As-bearing, including moncheite (PtTe₂), atokite (Pd₃Sn), kotulskite (PdTe), sperrylite (PtAs₂), irarsite (IrAsS), cooperite (PtS), sudburyite (PdSb), and Pt–Fe alloy. Primary rock-forming minerals are olivine and clinopyroxene, with clinopyroxene forming anhedral poikilitic crystals surrounding olivine. Primary chromite occurs either as euhedral grains enclosed within olivine or as an interstitial phase to the olivine. However, the intrusion has undergone extensive hydrothermal alteration. Most olivine grains have been altered to serpentine, and interstitial clinopyroxene is often altered to actinolite/tremolite and locally biotite. Interstitial chromite grains are either partially or totally replaced by secondary magnetite. Base-metal sulfides (BMS), such as pentlandite and chalcopyrite, are usually interstitial to the altered olivine. PGM are located with the BMS and are therefore also interstitial to the serpentinized olivine grains, occurring within altered interstitial clinopyroxene and chromite, or along the edges of these minerals, which predominantly altered to actinolite/tremolite, serpentine and magnetite. Hydrothermal fluids were responsible for the release of the platinum-group elements (PGE) from the BMS to precipitate the PGM at low temperature during pervasive alteration. A sequence of alteration of the PGM has been recognized. Initially moncheite and atokite have been corroded and recrystallized during the formation of actinolite/tremolite, and then, cooperite and moncheite were altered to Pt–Fe alloy where they are in contact with serpentine. Sudburyite occurs in veins indicating late Pd mobility. However, textural evidence shows that the PGM are still in close proximity to the BMS. They occur in PGE-rich layers located at specific igneous horizons in the intrusion, suggesting that PGE were originally magmatic concentrations that, within a PGE-rich horizon, crystallized with BMS late in the olivine/clinopyroxene crystallization sequence and have not been significantly transported during serpentinization and alteration.     

铂族元素矿物共生组合(英文)

由于铂族元素能有效地降低汽车尾气的污染 ,其需求量日益增加 ,对铂族元素矿床的寻找已是当务之急。着重从矿物矿床学角度对铂族元素的矿物共生特点进行了探讨。铂族元素可呈独立矿床产出 ,主要产于基性超基性层状侵入体、蛇绿岩套及阿拉斯加式侵入体中。铂族元素也伴生于铜镍矿床中 ,该类铜镍矿床主要与苏长岩侵入体、溢流玄武岩及科马提岩有关。产于基性超基性层状侵入体中的铂族矿物有铂钯硫化物、铂铁合金、钌硫化物、铑硫化物、铂钯碲化物、钯砷化物及钯的合金。这些铂族矿物可与硫化物矿物共生 ,也可与硅酸盐矿物共生 ,还可与铬铁矿及其他氧化物矿物共生。产于蛇绿岩套中的铂族矿物主要是钌铱锇的矿物 ,而铂钯铑的矿物则较少出现 ,这些铂族矿物可呈合金、硫化物、硫砷化物以及砷化物 4种形式出现。产于阿拉斯加式侵入体中的铂族矿物主要有铂铁合金、锑铂矿、硫铂矿、砷铂矿、硫锇矿及马兰矿等少数几种 ,其中铂铁合金与铬铁矿及与其同时结晶的高温硅酸盐矿物共生 ,而其他的铂族矿物则与后来的变质作用及蛇纹岩化作用中形成的多金属硫化物及砷化物共生。产于铜镍矿床中的铂族矿物主要是铂和钯的矿物。产于基性超基性层状侵入体、蛇绿岩套及阿拉斯加式侵入体中的铂族矿物的共同特点是它们均与铬铁矿?     

First report of platinum-group minerals from a hornblende gabbro dyke in the vicinity of the Southeast Extension Zone of the Voisey’s Bay Ni-Cu-Co deposit, Labrador

Summary This study reports the first documented occurrence of platinum group-minerals (PGM) in the vicinity of the Voisey’s Bay magmatic sulfide ore deposit. The PGM are present in a sulfide poor, hornblende gabbro dyke in the Southeast Extension Zone of the massive sulfide Ovoid deposit. The dyke has somewhat elevated concentrations of platinum-group elements (PGE) and gold (up to 1.95 g/t Pt, 1.41 g/t Pd, and 6.59 g/t Au), as well as Cu, Pb, Ag, Sn, Te, Bi and Sb. The PGM formed by magmatic processes and were little disturbed by subsequent infiltration of an externally-supplied hydrothermal fluid. To date, no similar PGM occurrences have been discovered in the Ovoid deposit itself. Whole rock REE patterns indicate that the dyke is geochemically related to the main conduit troctolites, which carry the bulk of the massive sulfide mineralization at Voisey’s Bay. The PGE mineralization is Pt- and Pd-rich, where the Pt and Pd occur predominantly as discrete PGM with minor Pd in solid solution in galena (average=1.8 ppm) and pentlandite (average=2 ppm). The discrete PGM are predominantly hosted by disseminated base-metal sulfides (bornite, chalcopyrite, and galena) (56 vol%) and are associated with other precious metal minerals (13 vol%) with only ∼3 vol% of the PGM hosted by silicate minerals. In whole rock samples, the PPGE (Pt, Pd, and Rh) correlate with abundances of chalcopyrite, bornite, galena, and other precious metal minerals (PMM), whereas the IPGE (Ir, Ru, and Rh) correlate with pyrrhotite and pentlandite. There are no correlations of the PGE with chlorine. Lead isotope compositions of galena associated with the PGE mineralization in the Southeast Extension Zone are broadly similar to those for galena in the Ovoid. The lead isotope compositions are much different from those in the Voisey’s Bay Syenite, which is a potential external hydrothermal fluid source. The observed Cu-rich, Pb-rich sulfide compositions and associated Pt-Pd-Au-Ag-Sn-Te-Bi-Sb assemblage in the dyke can be produced magmatically as late ISS differentiates (e.g., Prichard et al., 2004). Melting temperatures of the PGM are also consistent with a magmatic origin. Following crystallization of PGM from magmatic sulfide, an external REE-enriched hydrothermal fluid was introduced to the system, producing secondary amphibole and locally remobilizing the Pb and Sn from the sulfides hosting the PGM. Author’s address: M. A. E. Huminicki, Department of Earth Sciences, Memorial University of Newfoundland, St. John’s, NL, Canada A1B 3X5     

Platinum-Group Elements in Sulphide Minerals, Platinum-Group Minerals, and Whole-Rocks of the Merensky Reef (Bushveld Complex, South Africa): Implications for the Formation of the Reef

The concentrations of platinum-group elements (PGE), Co, Re,Au and Ag have been determined in the base-metal sulphide (BMS)of a section of the Merensky Reef. In addition we performeddetailed image analysis of the platinum-group minerals (PGM).The aims of the study were to establish: (1) whether the BMSare the principal host of these elements; (2) whether individualelements preferentially partition into a specific BMS; (3) whetherthe concentration of the elements varies with stratigraphy orlithology; (4) what is the proportion of PGE hosted by PGM;(5) whether the PGM and the PGE found in BMS could account forthe complete PGE budget of the whole-rocks. In all lithologies,most of the PGE (65 up to 85%) are hosted by PGM (essentiallyPt–Fe alloy, Pt–Pd sulphide, Pt–Pd bismuthotelluride).Lesser amounts of PGE occur in solid solution within the BMS.In most cases, the PGM occur at the contact between the BMSand silicates or oxides, or are included within the BMS. Pentlanditeis the principal BMS host of all of the PGE, except Pt, andcontains up to 600 ppm combined PGE. It is preferentially enrichedin Pd, Rh and Co. Pyrrhotite contains, Rh, Os, Ir and Ru, butexcludes both Pt and Pd. Chalcopyrite contains very little ofthe PGE, but does concentrate Ag and Cd. Platinum and Au donot partition into any of the BMS. Instead, they occur in theform of PGM and electrum. In the chromitite layers the whole-rockconcentrations of all the PGE except Pd are enriched by a factorof five relative to S, Ni, Cu and Au. This enrichment couldbe attributed to BMS in these layers being richer in PGE thanthe BMS in the silicate layers. However, the PGE content inthe BMS varies only slightly as a function of the stratigraphy.The BMS in the chromitites contain twice as much PGE as theBMS in the silicate rocks, but this is not sufficient to explainthe strong enrichment of PGE in the chromitites. In the lightof our results, we propose that the collection of the PGE occurredin two steps in the chromitites: some PGM formed before sulphidesaturation during chromitite layer formation. The remainingPGE were collected by an immiscible sulphide liquid that percolateddownward until it encountered the chromitite layers. In thesilicate rocks, PGE were collected by only the sulphide liquid. KEY WORDS: Merensky Reef; Rustenburg Platinum Mine; sulphide; platinum-group elements; image analysis; laser ablation ICP-MS     

Comparative petrology of the leucocratic syenites of the Northwest Highlands of Scotland

The normative mineralogy of the Loch Borralan, Loch Ailsh and Loch Loyal leucosyenites is compared to the System Ab – Or – An - Qz. At Borralan, the upper quartz-syenites of Cnoc-na-Sroine plot within the plagioclase volume, the lower perthosites within the alkali feldspar volume. This mineralogy cannot have been attained by in situ crystal fractionation. The Ailsh rocks plot within the plagioclase volume, the Loyal syenites within the alkali feldspar volume. The three complexes cannot have been derived from a single magma body at depth, and are not precisely coeval.     

Genesis of the Jinchuan PGE deposit, China: evidence from fluid inclusions, mineralogy and geochemistry of precious elements

Summary The Jinchuan deposit is a platinum group element (PGE)-rich sulfide deposit in China. Drilling and surface sampling show that three categories of platinum group element (PGE) mineralization occur; type I formed at magmatic temperatures, type II occurs in hydrothermally altered zones of the intrusion, and type III in sheared dunite and lherzolite. All ore types were analyzed for Os, Ir, Ru, Rh, Pd, Pt and Au, as well as for Cu, Ni, Co and S. Type I ore has (Pt + Pd)/(Os + Ir + Ru + Rh) ratios of <7 and relatively flat chondrite-normalized noble metal patterns; the platinum group minerals (PGM) are dominated by sperrylite and moncheite associated with chalcopyrite, pyrrhotite and pentlandite. Type II has (Pt + Pd)/(Os + Ir + Ru + Rh) ratios from 40 to 330 and noble metal distribution patterns with a positive slope; the most common PGM are sperrylite and Pd bismuthotelluride phases concentrated mostly at the margins of base metal sulfides. Type III ores have the highest (Pt + Pd)/(Os + Ir + Ru + Rh) ratios from 240 to 710; the most abundant PGM are sperrylite and phases of the Pt–Pd–Te–Bi–As–Cl system. It is concluded that the Jinchuan deposit formed as a result of primary magmatic crystallization followed by hydrothermal remobilization, transport, and deposition of the PGE.     

Stratiform platinum-group element mineralization in the layered Northern Ultramafic Center of the Lac des Iles Intrusive Complex,Ontario, Canada

The Northern Ultramafic Centre (NUC) of the Lac des Iles Complex, Northwest Ontario hosts several platinum group element (PGE) occurrences, including the Sutcliffe Zone, which consists of four subparallel, stratiform PGE-enriched intervals exposed within the cyclically layered eastern flank of the NUC. Field relationships, mineral paragenesis and lithogeochemistry allowed for the identification of 14 cyclic cumulate sequences of two distinct types – Cyclic unit type A (CUA) and Cyclic unit type B (CUB). CUA-type and CUB-type units are interpreted to have formed from a Si-enriched and Si-poor parent magmas, respectively. PGE-enriched intervals occur in four of the CUA-type cyclic units (CUA-5, -6, -8 and -11). PGE enriched intervals are commonly associated with websterite, olivine websterite and gabbronorite containing primary disseminated sulfide (0.2–2 vol%) which are dominated by pyrrhotite, chalcopyrite, and pentlandite with minor cubanite, and troilite. In hydrothermally altered rocks enriched in PGE, primary sulfides are locally partially replaced by secondary chalcopyrite, sphalerite, heazlewoodite, and chalcocite. Palladium occurs either in solid solution with primary pentlandite or is associated with platinum group minerals (PGM) such as Pd-plumbide, Pd-telluride, and Pt-bismuthotelluride. PGMs commonly occur within primary sulfides, at contacts between primary sulfide–silicate minerals, or in association with secondary serpentine and actinolite. Gold and silver typically occur as electrum that exhibits similar textural characteristics and mineralogical associations as the PGMs.Two different chemostratigraphic patterns of PGE, Cu and S enrichment can be recognized among the mineralized CUA cycles: The first (top-loaded) occurs near the top of CUA cycles (CUA-6, -8 and -11) in websterite and/or gabbronorite, just below the levels at which CUB magmas were emplaced. The second (middle-loaded), occurs midway through the lower cycle (CUA-5) in the olivine websterite, which is overlain by CUA-6. Within the four mineralized intervals, PGE tenors average 643 ppm Pd + Pt (in 100% sulfide), Pd/Pt and Pd/Ir ratios range from 0.9 to 3.5 and 35 to 537, respectively, and S/Se ratios range between 500 and 6000. The highest PGE tenors (4377 ppm Pd + Pt) are found in the lowermost interval in serpentinized olivine websterite and have an average Pd/Pt ratio of 3.5 and a S/Se ratio of approximately 2000.It is proposed that orthomagmatic processes of fractional crystallization and dynamic magma recharge were the dominant mineralization processes triggering sulfide-saturation and PGE concentration at the Sutcliffe Zone. Textural relationships between PGM, sulfide minerals, and primary and secondary hydrous silicates suggest that late magmatic to postcumulus hydrothermal fluid infiltration occurred locally during and after sulfide mineralization of the PGE-enriched intervals. However, these fluids had a minimal effect on the distribution of PGE in the Sutcliffe Zone. The Sutcliffe Zone shares many similarities with classic stratiform PGE deposits in terms of Pd/Pt ratio, high PGE tenors, low abundance of sulfide, and PGM assemblages. However, it is distinguished from most stratiform PGE deposits by its tectonic environment and lithostratigraphic position and by the intimate spatial association of the two parental magmas that are interpreted to have been responsible for the observed chemostratigraphy and PGE enrichment.     

Subduction-related shoshonitic and ultrapotassic magmatism: a study of Siluro-Ordovician syenites from the Scottish Caledonides

Syenites are important or predominant components of several plutonic complexes, emplaced between 456 and 415 Ma along the NW margin of the Caledonian orogenic belt, adjacent to the Lewisian foreland, in W and NW Scotland. Although there are, in detail, chemical differences between the syenites from each centre, they form a well-defined compositional group overall. Ratios amongst their trace elements (especially very high values of La/Nb) are quite different from those trachytes and syenites formed by fractional crystallisation of ocean-island basalts and their continental equivalents, emplaced in regions of anorogenic crustal tension. Instead, the Scottish Caledonian syenites closely resemble chemically the fractional-crystallisation residua of potassic subduction-related magmas, such as the shoshonitic series. A comendite minor intrusion from a swarm associated with the Loch Borralan and Loch Ailsh syenitic complexes is remarkably similar in composition to Recent obsidian from the shoshonitic volcano of Lipari, in the Aeolian Arc. Published Sr- and Pb-isotopic ratios preclude a significant component of either upper (Proterozoic Moine schists) or lower crust (granulite-facies Archaean Lewisian or Proterozoic Grenvillian gneisses) in all these syenites, except in local syenitic facies of the Glenelg-Ratagain complex. Fractional crystallisation appears to be the mechanism by which the liquids which formed these syenites evolved from basic parental magmas. The phases involved in this process may have included plagioclase, alkali feldspar, pyroxene, amphibole, biotite, garnet, Fe-Ti oxide, sphene, allanite, apatite, zircon and zirconolite, and therefore all the ratios amongst even the so-called incompatible elements may have changed during the evolution of the leucocratic magmas. Nevertheless, a detailed study of the Glen Dessarry complex shows that the changes are insufficient to disguise the geochemical nature of the parental magmas. These appear to be picritic shoshonite (MgO> 15%, Ni>400ppm, La/Yb20, La/Nb>5) for the Glen Dessarry, Loch Borralan and Loch Ailsh syenites, and picritic ultrapotassic magmas (MgO>15%, Ni>400 ppm, La/ Yb60, La/Nb>7) — such as would crystallise to minettes — for the Loch Loyal and Glenelg-Ratagain syenites. Mafic shoshonites were erupted amongst the 410 Ma Lome lavas of this region and also occur as widespread approximately-contemporaneous volcanic feeder plugs. Minettes of similar age are also common as dykes in NW Scotland. Numerous large tonalite-granite complexes, with minor diorites and gabbros, were emplaced in W and NW Scotland between 435 and 400 Ma. These are generally acknowledged to be mixtures of magmas from crustal and mantle sources. Their more mafic members show compositional features, such as very high Ba and Sr, which group them with the rare syenites and the Lorne lavas of the same region into a distinctive geochemical province, within which shoshonitic and allied magmas were the mantle-derived component. Two models are presented to account for the generation of strongly-potassic, subduction-related magmas several hundred km behind a NW-directed subduction zone, or during the period immediately following continental collision.     

Genesis of PGE mineralization in the Wengeqi mafic–ultramafic complex, Guyang County, Inner Mongolia, China

The Wengeqi complex in Guyang County, Inner Mongolia, is one of several Pd–Pt-mineralized Paleozoic mafic–ultramafic complexes along the north-central margin of the North China. The complex comprises pyroxenites, biotite pyroxenites, amphibole pyroxenites, gabbros, and amphibolites. Zircons extracted from a pyroxenite yield a U–Pb SHRIMP age of 399?±?4?Ma. Several 2–6-m wide syngenetic websterite dikes contain 1–3?ppm Pd?+?Pd and are dominated by pyrite–chalcopyrite–pyrrhotite–magnetite–(pentlandite) assemblages with minor sperrylite, sudburyite, and kotuskite. Textural relationships indicate that pyrite has replaced magmatic chalcopyrite and that magnetite has replaced magmatic pyrrhotite. The mineralization is enriched in Pd–Pt–Cu > Au >> Rh–Ir–Os–Ni > Ru, similar to other occurrences of hydrothermally modified magmatic mineralization, but very different from the much less fractionated compositions of magmatic PGE mineralization. Textural, mineralogical, and geochemical relationships are consistent with alteration of an original magmatic Fe–Ni–Cu sulfide assemblage by a S-rich oxidizing high-temperature (deuteric) hydrothermal fluid.     

Geology, mineralogy, and genesis of PGE mineralization in the South Sopcha massif, Monchegorsk complex, Russia

New data are reported on the localization and genesis of PGE mineralization at the South Sopcha deposit situated in the southern framework of the Monchegorsk pluton. Disseminated PGE-Cu-Ni mineralization, the thickness of which in particular boreholes exceeds 100 m, is hosted in the zone of alternating peridotite, pyroxenite, norite, and gabbronorite. The PGE grade does not exceed 1?C2 gpt with Pd/Pt = 3?C4 at Ni and Cu contents from 0.2 to 1.5 wt %. The PGE contents up to 4?C6 gpt and Pd/Pt = 4?C8 are noted at local sites of hydrothermally altered rocks. Another type of PGE mineralization is established in the outcrops of the southeastern marginal group of the massif. Pyroxenite, norite, and gabbronorite fragments are incorporated here in the gabbroic matrix, making up a complex zone of magmatic breccia complicated by mylonites and late injections. Elevated PGE contents (1.0?C6.5 gpt) are detected in all types of rocks in the zone of brecciation, mainly in the matrix. Platinum-group minerals (PGM) occur in association with magmatic and late sulfides, amphibole, mica, and chlorite. PGM vary in composition depending on the petrographic features of rocks. In rocks of the layered series and in pegmatoid pyroxenite PGM are extremely diverse comprising PGE compounds with As, Sb, Bi, Te, Se, and S. In the brecciated rocks of the marginal group, Pd bismuthotellurides (mainly merenskyite), sperrylite, hollingworthite, and Pd- and Rh-bearing cobaltite and gersdorffite are predominant. The PGE mineralization in rocks of the layered series and pegmatoid pyroxenite was formed from the magmatic melt enriched in volatiles and with subsequent transformation of PGE assemblages under the influence of hydrothermal fluids at a lower temperature. In gabbroic rocks of the marginal group, PGM are associated with the latest sulfides (chalcopyrite, bornite, chalcocite), forming separate grains and thin veinlets in hydrothermally altered rocks. The gabbroic melt affected incompletely crystallized rocks of the layered series by formation of contact-type PGE mineralization, deposition and redeposition of ore matter.     

Distribution of platinum-group elements in magmatic and altered ores in the Jinchuan intrusion, China: an example of selenium remobilization by postmagmatic fluids

The division of platinum-group elements (PGE) between those hosted in platinum-group minerals (PGM) versus those in solid solution in base metal sulfides (BMS) has been determined for ores from the PGE-bearing Ni-Cu-rich Jinchuan intrusion in northwest China. All the BMS are devoid of Pt and Ir, and magmatic BMS are also barren of Rh. These PGE may have been scavenged by arsenic to form PGM during magmatic crystallization of the BMS. Pd, Os, and Ru are recorded in BMS and Pd is predominantly in solid solution in pentlandite. Unlike the fresh magmatic ores, in altered or serpentinized ores, Pd-PGM are present. Froodite is hosted in magnetite, formed during alteration of BMS, accompanied by sulfur loss and liberation of Pd. Michenerite ([Pd,Pt]BiTe), sperrylite (PtAs₂), and Au-bearing PGM are located in altered silicates. Irarsite (IrAsS) occurs mainly enclosed in BMS. Padmaite (PdBiSe), identified at the junctions of magnetite and BMS, was the last PGM to form and locally partially replaces earlier non-Se-bearing PGM. We propose that padmaite formed under oxidizing conditions during late local remobilization of Se from the BMS. Se-bearing PGM are rare and our review shows they are frequently associated with carbonate, suggesting that Pd and Se can be mobilized great distances in low pH oxidizing fluids and may be precipitated on contact with carbonate. S/Se ratios are used by researchers of magmatic Ni-Cu-PGE ores to determine sulfur loss, assuming Se is immobile and representative of magmatic sulfur content. This study shows that Se as well as S is potentially mobile and this should be considered in the use of S/Se ratios.     

金川铜镍硫化物矿床中铂族矿物的主要类型和产出特征:热液蚀变过程中铂族元素的富集机理

金川铜镍硫化物矿床是我国最主要的铂族元素(PGE)资源产地,其矿石受热液蚀变作用影响明显,并产出多种铂族矿物(PGM)。岩浆演化和热液蚀变过程中PGE的迁移富集机制和PGM的成因,一直是研究PGE地球化学行为非常关注的问题。本文对金川铜镍硫化物矿床中PGM的研究发现,其主要类型包括含PGE的硫砷化物(硫砷铱矿)和砷化物(砷铂矿),Pd的铋化物、碲化物和硒化物,以及少量其他铂族矿物。其中,硫砷铱矿可包裹于各种贱金属硫化物(镍黄铁矿、磁黄铁矿和黄铜矿)中,表明硫砷铱矿可能结晶于早期的含As硫化物熔体,随后被包裹于硫化物熔体冷凝分异产生的单硫化物固溶体(MSS)和中间硫化物固溶体(ISS)中。硫化物熔体中的As可能主要通过地壳混染作用加入幔源岩浆。大量铋钯矿(PdBi)呈微细乳滴状包裹于黄铜矿中,为晚期ISS冷凝形成黄铜矿过程中出溶的产物。少量铋钯矿(PdBi_2)呈不规则状充填于矿物裂隙,与次生磁铁矿脉紧密共生,并随矿石的蚀变程度增加,铋钯矿的化学成分由PdBi逐渐向PdBi_2转变,表明这部分铋钯矿为后期热液蚀变产物。铋碲钯矿和钯的硒化物则主要产出于镍黄铁矿裂隙且与次生磁铁矿紧密共生,指示明显的热液成因。钯的硒化物的出现表明,岩浆期后酸性、高盐度、高氧逸度的富Cl~-流体对金川铜镍硫化物矿床中Pd的迁移和富集起到了关键控制作用。     

Zoning of platinum group mineral assemblages in the UG2 chromitite determined through in situ SEM-EDS-based image analysis

In situ scanning electron microscopy–energy dispersive X-ray spectrometry analysis of platinum group minerals (PGM) and base metal sulfides in the UG2 chromitite shows that this ore body is zoned along at least ∼6 km of strike. The uppermost part of the UG2 chromitite, referred to as the leader seam, is ∼16 cm thick and has a PGM assemblage that is dominated by PGE arsenides, sulpho-arsenides, and alloys (∼70 vol.% of all PGM), which are typical secondary PGM assemblages in other segments of UG2. This is the first time such laterally persistent secondary assemblages have been identified in the UG2 chromitite, as previously, they were only known to occur adjacent to transgressive fluid-bearing structures (e.g., pipes, faults). The underlying main seam is thicker (one to nine seams totaling ∼130 cm) and has a PGM assemblage that consists mostly of Pt sulfide, Pt–Pd sulfide, Pt–Rh–Cu sulfide, laurite, and Fe–Pt alloys (∼85 vol.% of all PGM), typically regarded as primary magmatic constituents of UG2 chromitite. There are, however, some subtle vertical changes in the PGM assemblages of the main seam that include the occasional presence of secondary assemblages in the top and bottom parts. The origin of these secondary PGM assemblages is related to alteration by hydrothermal fluids and/or fluid-rich melts that infiltrated during crystallization of the UG2 and may possibly have been derived from the UG2 chromitite itself.     

The Paasivaara PGE reef in the Penikat layered intrusion,northern Finland

Summary Three major PGE-bearing mineralized zones have been found in the layered series of the early Proterozoic Penikat layered intrusion. These are designated as the Sompujärvi (SJ), Ala-Penikka (AP) and Paasivaara (PV) Reefs according to the site of their initial discovery.The uppermost of these, the PV Reef, has the highest Pt/Pd ratio. It is located in the transition zone between the fourth and the fifth megacyclic units. The main host rock is the uppermost anorthosite, disseminated sulphides and associated PGM being concentrated in the interstices of this plagioclase orthocumulate. The Reef has also been encountered in other parts of the transition zone, however, and sometimes even in the lowermost parts of the fifth megacyclic unit. The dominant sulphide paragenesis is chalcopyrite-pyrrhotite-pentlandite, whereas the PGM identified are represented by sperrylite (PtAs₂), kotulskite (PdTe), merenskyite (PdTe₂), isomertieite (Pd₁₁Sb₂As₂), stibiopalladinite (Pd₅Sb₂), cooperite (PtS) and braggite ((Pt, Pd, Ni)S).It is suggested that the PV Reef was formed in the mixing process when the fifth magma pulse intruded into the magma chamber. Mixing of the new magma with the older residual magma in the chamber accounted for the sulphide precipitation. Mixing and convection were probably turbulent at first and the sulphides were thus able to "scavenge" PGE from a large amount of silicate melt. The metal ratios in the mineralization point to a close genetic relationship with the fifth magma pulse.

---

Das Paasivaara PGE Reef in der Penikat-Intrusion, Nord-Finnland

Zusammenfassung In den geschichteten Serien der frühproterozoischen Intrusion von Penikat kommen drei grössere PGE-führende Zonen vor. Diese werden als die Sompujärvi (SJ), Ala-Penikka (AP) und Paasivaara (PV) Reefs bezeichnet, entsprechend den Lokalitäten der Entdeckung.Das am höchsten gelegene PV Reef hat die höchsten Pt/Pd Verhältnisse. Es liegt in der Übergangszone zwischen der vierten und der fünften megazyklischen Einheit. Das wichtigste Wirtsgestein ist der oberste Anorthosit, wo disseminierte Sulfide und assoziierte PGM in den Zwischenräumen dieses Plagioklas-Orthokumulates vorkommen. Das Reef wurde auch in anderen Teilen der Überganszone beobachtet und manchmal sogar in den untersten Partien der fünften megazyklischen Einheit. Die dominierende Sulfidparagenese ist Kupferkies-Magnetkies-Pentlandit; PGM sind Sperrylith (PtAs₂), Kotulskit (PdTe), Merenskyit (PdTe₂), Isomertieit (Pd₁₁Sb₂As₂), Stibiopalladinit (Pd₅Sb₂), Cooperite (PtS) und Braggit ((Pt, Pd, Ni)S).Es wird angeregt, dass das PV Reef während der Mischungsvorgänge bei der Intrusion des fünften Magma Pulses in die Magmenkammer entstanden ist. Mischung des neuen Magmas mit dem alten Residual-Magma in der Kammer war für die Ausfällung der Sulfide verantwortlich. Mischung und Konvektion dürften anfangs turbulent gewesen sein, und so konnten die Sulfide die PGE aus einem beträchtlichen Anteil der Silikatschmelze entfernen. Die Metallverhältnisse dieser Vererzung lassen eine enge genetische Verbindung mit dem fünften Magmapuls erkennen.

---

---

With 8 Figures     

Origin of primary PGM assemblage in сhromitite from a mantle tectonite at Harold’s Grave (Shetland Ophiolite Complex, Scotland)

In this paper we present textural and mineral chemistry data for a PGM inclusion assemblage and whole-rock platinum-group element (PGE) concentrations of chromitite from Harold’s Grave, which occurrs in a dunite pod in a mantle tectonite at Unst in the Shetland Ophiolite Complex (SOC), Scotland. The study utilized a number of analytical techniques, including acid digestion and isotope dilution (ID) ICP-MS, hydroseparation and electron microprobe analysis. The chromitite contains a pronounced enrichment of refractory PGE (IPGE: Os, Ir and Ru) over less refractory PGE (PPGE: Rh, Pt and Pd), typical of mantle hosted ‘ophiolitic’ chromitites. A ‘primary’ magmatic PGM assemblage is represented by euhedrally shaped (up to 60 μm in size) single and composite inclusions in chromite. Polyphase PGM grains are dominated by laurite and osmian iridium, with subordinate laurite + osmian iridium + iridian osmium and rare laurite + Ir-Rh alloy + Rh-rich sulphide (possibly prassoite). The compositional variability of associated laurite and Os-rich alloys at Harold’s Grave fit the predicted compositions of experiment W-1200-0.37 of Andrews and Brenan (Can Mineral 40: 1705–1716, 2002) providing unequivocal information on conditions of their genesis, with the upper thermal stability of laurite in equilibrium with Os-rich alloys estimated at 1200–1250 °C and f(S₂) of 10^?0.39–10^?0.07.     

Palladium and gold mineralization in podiform chromitite at Kraubath, Austria

Summary ?We report, for the first time, the occurrence of five palladium-rich, one palladium bearing and two gold-silver minerals from podiform chromitites in the Eastern Alps. Minerals identified include braggite, keithconnite, stibiopalladinite, potarite, mertieite II, Pd-bearing Pt-Fe alloy, native gold and Ag-Au alloy. They occur in heavy mineral concentrates produced from two massive podiform chromitite samples (unaltered and highly altered) of the Kraubath ultramafic massif, Styria, Austria. Distribution patterns of platinum-group elements (PGE) in these chromitites show considerable differences in the behaviour of the less refractory PGE (PPGE-group: Rh, Pt, Pd) compared to the refractory PGE (IPGE-group: Os, Ir, Ru). PPGE are more enriched in chromitite showing pronounced alteration features. The unaltered chromitite displays a negatively sloped chondrite-normalised PGE pattern similar to typical ophiolitic-podiform chromitite. Except for the Pd- and Au-Ag minerals that are generally rare in ophiolites, about 20 other platinum-group minerals (PGM) have been discovered. They include PGE-sulphides (laurite, erlichmanite, kashinite, bowieite, cuproiridsite, cuprorhodsite, unnamed Ir-rich variety of ferrorhodsite, unnamed Ni-Fe-Cu-Rh- and Ni-Fe-Cu-Ir-Rh monosulphides), PGE alloys (Pt-Fe, Ir-Os, Os-Ir and Ru-Os-Ir), PGE-sulpharsenides (irarsite, hollingworthite, platarsite, ruarsite and a number of intermediate species), sperrylite and a Ru-rich oxide (?). Three PGM assemblages have been recognised and attributed to different processes ranging from magmatic to hydrothermal and weathering-related. Pd-rich minerals are characteristic of both chromitite types, although their chemistry and relative proportions vary considerably. Keithconnite, braggite and Pd-bearing ferroan platinum, together with a number of PGE-sulphides (mainly laurite-erlichmanite) and alloys, are typical only of the unaltered podiform chromitite (assemblage I). Euhedral mono- and polyphase PGM grains in the submicron to 100 μm range show features of primary magmatic assemblages. The diversity of PGM in these assemblages is unusual for ophiolitic environments. In assemblage II, laurite-erlichmanite is intergrown with and overgrown by PGE-sulpharsenides; other minerals of assemblage I are missing. Potarite, stibiopalladinite, mertieite II, native gold and Ag-Au alloys, as well as PGE-sulpharsenides, sperrylite and base metal arsenides and sulphides are characteristic for the highly altered chromitite (assemblage III). They occur either interstitial to chromite in association with metamorphic silicates, in chromite rims or along cracks, and are thus interpreted as having formed by remobilization of PGE by hydrothermal processes during polyphase regional metamorphism. Received August 3, 2000;/revised version accepted December 28, 2000     

Mineralogy and geochemistry of platinum-group elements in the Aguablanca Ni-Cu deposit (SW Spain)

Summary The Aguablanca Ni-Cu-(PGE) magmatic sulphide deposit is associated with a magmatic breccia located in the northern part of the Aguablanca gabbro (SW, Iberia). Three types of ores are present: semi-massive, disseminated, and chalcopyrite-rich veined ore. The principal ore minerals are pyrrhotite, pentlandite and chalcopyrite. A relatively abundant platinum-group mineral (PGM) assemblage is present and includes merenskyite, melonite, michenerite, moncheite and sperrylite. Moreover, concentrations of base and precious metals and micro-PIXE analyses were obtained for the three ore-types. The mineralogy and the mantle-normalised chalcophile element profiles strongly suggest that semi-massive ore represents mss crystallisation, whereas the disseminated ore represents an unfractionated sulphide liquid and the chalcopyrite-rich veined ore a Cu-rich sulphide liquid. Palladium-bearing minerals occur commonly enclosed within sulphides, indicating a magmatic origin rather than hydrothermal. The occurrences and the composition of these minerals suggest that Pd was initially dissolved in the sulphides and subsequently exsolved at low temperatures to form bismutotellurides. Negative Pt and Au anomalies in the mantle-normalised chalcophile element profiles, a lack of Cu-S correlation and textural observations (such as sperrylite losing its euhedral shape when in contact with altered minerals) suggest partial remobilisation of Pt, Au and Cu by postmagmatic hydrothermal fluids after the sulphide crystallisation. Authors’ addresses: R. Pi?a, L. Ortega, R. Lunar, Departamento de Cristalografía y Mineralogía, Facultad de Geología, Universidad Complutense de Madrid, ES-28040 Madrid, Spain; F. Gervilla, Facultad de Ciencias, Instituto Andaluz de Ciencias de la Tierra, Universidad de Granada-CSIC, Avda. Fuentenueva, s/n, ES-18002 Granada, Spain     

Platinum-group elements in porphyry copper deposits: a reconnaissance study

Summary Sulphide and flotation concentrates from 33 porphyry copper deposits have been investigated for platinum-group elements (PGE), Au, Cu and platinum-group minerals (PGM). The major sulphides in the samples studied are chalcopyrite and pyrite. Bornite is less frequent and molybdenite occurs in traces only. PGM (merenskyite, sperrylite and an unidentified Pd-Sb telluride) have been found as inclusions in chalcopyrite.Pd and Pt are present in concentrations above the analytical detection limit (> 8 ppb) in 70% respectively 30% of the deposits studied. The contents of Os, Ir, Ru and Rh are below detection limits in all samples. The analytical results show that 7 deposits (six of island arc and one of continental margin setting) reveal relatively high Pd contents (130–1900 ppb) which are associated with high Au contents (1–28 ppm). In five of them discrete PGM can be identified in accordance with elevated levels of Pd. Correlations of Au, Pd and Pt point towards a common origin.Even though the data base is relatively small, a trend is obvious, suggesting that Au-rich island arc porphyry copper deposits might host more Pd and Pt than the continental margin type ones. Other aspects of intrusive rocks, such as geological age, chemical composition and magma type do not seem to influence PGE contents.

---

Platingruppen-Elemente in porphyrischen Kupfer Lagerstätten: eine Überblicksstudie

Zusammenfassung Es wurden Sulfid- und Flotationskonzentrate aus 33 Porphyry Kupfer Lagerstätten: auf Platingruppenelemente (PGE), Au, Cu and Platingruppenminerale (PGM) untersucht. Die Hauptsulfide im untersuchten Probenmaterial sind Chalkopyrit und Pyrit. Bornit ist weniger häufig and Molybdänit tritt nur in Spuren auf. An PGM wurden Merenskyit (in den Lagerstätten: Elacite, Majdanpek and Skouries), Sperrylith und ein nicht näher identifizierbares Pd-Sb- Tellurid (in der Lagerstätte Mamut) als Einschlüsse in Chalkopyrit festgestellt.Pd ist in 70% and Pt in 30% der untersuchten Lagerstätten: nachweisbar (> 8 ppb), während die Gehalte von Os, Ir, Ru and Rh in allen Proben unterhalb der Nachweisgrenze liegen. In 7 Lagerstätten: (davon sechs vom Inselbogen- und eine vom Kontinentalrandtyp) wurden relativ hohe Pd-Konzentrationen (130–1900 ppb) festgestellt, die auch durch hohe Au-Gehalte (1–28 ppm) gekennzeichnet sind. In 5 Lagerstätten: sind entsprechend den hohen Pd-Gehalten PGM nachweisbar.Geochemische Korrelationen zwischen Au, Pd and Pt weisen auf eine gemeinsame Herkunft dieser Metalle hin. Obwohl der Datenbestand noch relativ klein ist, ist ein Trend bereits sichtbar, daß Au-reiche Inselbogenporphyries Where Pd- und Pt- Gehalte erwarten lassen als der Kontinentalrand-Typ. Andere Aspekte wie geologisches Alter, Magmentyp and Chemismus der betreffenden Intrusivgesteine spielen bei der PGEFührung offensichtlich keine Rolle.

---

---

With 8 Figures