Low-latitude “dusty events” vs. high-latitude “icy Heinrich events”

It has been proposed that tropical events could have participated in the triggering of the classic, high-latitude, iceberg-discharge Heinrich events (HE). We explore low-latitude Heinrich events equivalents at high resolution, in a piston core recovered from the tropical north-western African margin. They are characterized by an increase of total dust, lacustrine diatoms and fibrous lacustrine clay minerals. Thus, low-latitude events clearly reflect severe aridity events that occurred over Africa at the Saharan latitudes, probably induced by southward shifts of the Inter Tropical Convergence Zone. At a first approximation, it seems that there is more likely synchronicity between the high-latitude Heinrich Events (HEs) and low-latitude events (LLE), rather than asynchronous behaviours.     

Compositional classification of “kimberlitic” and “non-kimberlitic” ilmenite

Ilmenite is one of the common kimberlitic indicator minerals recovered during diamond exploration, and its distinction from non-kimberlitic rock types is important. This is particularly true for regions where these minerals are present in relatively low abundance, and they are the dominant kimberlitic indicator mineral recovered. Difficulty in visually differentiating kimberlitic from non-kimberlitic ilmenite in exploration concentrates is also an issue, and distinguishing kimberlitic ilmenite from those derive from other similar rocks, such as ultramafic lamprophyres, is practically impossible. Ilmenite is also the indicator mineral whose compositional variety has the most potential to resolve provenance issues related to mineral dispersions with contributions from multiple kimberlite sources.

Various published data sets from selected kimberlitic (including kimberlites, lamproites, and various ultramafic lamprophyres) and non-kimberlitic rock types have been compiled and evaluated in terms of their major element compositions. Compositional fields and bounding reference lines for ilmenites derived from kimberlites (sensu stricto), ultramafic lamprophyres, and other non-kimberlitic rock types have been defined primarily on MgO–TiO₂ graphs as well as MgO–Cr₂O₃ relationships.     

“Traditional” women, “modern” water: Linking gender and commodification in Rajasthan, India

In this paper, I analyze the connections made between women and water in a Rajasthani drinking water supply project as a significant part of drinking water’s commodification. For development policy makers, water progressing from something free to something valued by price is inevitable when moving economies toward modernity and development. My findings indicate that water is not commodified simply by charging money for it, but through a series of discourses and acts that link it to other “modern” objects and give it value. One of these objects is “women”. I argue that through women’s participation activities that link gender and modernity to new responsibilities and increased mobility for village women involving the clean water supply, a “traditional” Rajasthani woman becomes “modern”. Water, in parallel, becomes “new”, “improved” and worth paying for. Women and water resources are further connected through project staff’s efforts to promote latrines by targeting women as their primary users. The research shows that villagers applied their own meanings to latrines, some of which precluded women using them. This paper fills a gap in feminist political ecology, which often overlooks how gender is created through natural resource interventions, by concerning itself with how new meanings of “water” and “women” are mutually constructed through struggles over water use and its commodification. It contributes to critical development geography literatures by demonstrating that women’s participation approaches to natural resource development act as both constraints and opportunities for village constituents. It examines an under-explored area of gender and water research by tracing village-level struggles over meanings of latrines.     

Comment on ‘Testing earthquake prediction methods: “The West Pacific short-term forecast of earthquakes with magnitude MwHRV ≥ 5.8”’ by V.G. Kossobokov

In his paper Kossobokov investigates the efficiency of our short-term forecast for two western Pacific regions. Although we agree with the basic results of his evaluation that the forecast statistics is much better than a random guess, we have reservations about his definition of earthquake prediction, some of his tests, and his interpretation of the test results. We distinguish between deterministic earthquake predictions and statistical forecasts. We argue that some techniques used by Kossobokov may not be appropriate for testing our forecasts and discuss other testing methods, based on the likelihood function. We demonstrate that Kossobokov's null hypothesis may be biased, and this bias can influence some of his conclusions. We show that contrary to Kossobokov's statement, our algorithm predicts mainshocks when they are preceded by foreshocks.     

THE SURF “BREAK”: KEY TO PALEOGEOGRAPHY?

Ancient geosynclinal coastal deposits, preserved and exposed for present-day examination, probably represent interior—and hence protected—shores, and were therefore characterized by low-to-moderate breaker energy levels, as is the modern Gulf of Mexico. Modern low-energy beach sand size distributions are distinguished by an inflection, here called the surf “break”, formed by a winnowing or statistical filtering process, by the breakers, in the finer sizes. The result is a two-segment curve having an intersection in many cases not far from 1.5 phi. If the energy level is very low, a tail of fines may be added, producing a three-segment curve having two inflection points. Along high energy beaches, the surf “break” occurs at such large grain sizes that it cannot be preserved in sand; whether or not it can be recognized in gravel is not known. Ancient sandstones which represent the breaker zone, along a low-to-moderate energy coast, should also exhibit the surf “break”. The Lyons Sandstone, a known Permian beach deposit, provides an example. Other examples are cited. Any useful indicator of the shoreline position, in lithified rocks, should have three characteristics: ease of recognition, high reliability, and strong probability of preservation. The surf “break” scores reasonably well on all three points. Hence it may be an important key to paleogeography. Nevertheless, there still remains a question inasmuch as certain river sands have similar inflections. Whether these kinks were inherited from near-by, but older, beach deposits, or were formed by stream action, is not known. The reliability of the surf “break” is estimated at 80% or better, except for the case where near-shore sands, of whatever age, are reworked briefly by running water.     

Deep structure under Yellowstone National Park U.S.A.: A continental “hot spot”

In order to understand the origin of long-lived loci of volcanism (sometimes called “hot spots”) and their possible role in global tectonic processes, it is essential to know their deep structure. Even though some work has been done on the crustal, upper-mantle, and deep-mantle structure under some of these “hot spots”, the picture is far from clear. In an attempt to study the structure under the Yellowstone National Park U.S.A., which is considered to be such a “hot spot”, we recorded teleseisms using 26 telemetered seismic stations and three groups of portable stations. The network was operated within a 150 km radius centered on the Yellowstone caldera, the major, Quaternary volcanic feature of the Yellowstone region. Teleseismic delays of about 1.5 sec are found inside the caldera, and the delays remain high over a 100 km wide area around the caldera. The spatial distribution and magnitude of the delays indicate the presence of a large body of low-velocity material with horizontal dimensions corresponding approximately to the caldera size (40 km × 80 km) near the surface and extending to a depth of 200–250 km under the caldera. Using ray-tracing and inversion techniques, it is estimated that the compressional velocity inside the anomalous body is lower than in the surrounding rock by about 15% in the upper crust and by 5% in the lower crust and upper mantle. It is postulated that the body is partly composed of molten rock with a high degree of partial melting at shallow depths and is responsible for the observed Yellowstone volcanism. The large size of the partially molten body, taken together with its location at the head of a 350 km zone of volcanic propagation along the axis of the Snake River Plain, indicates that the volcanism associated with Yellowstone has its origin below the lithosphere and is relatively stationary with respect to plate motion. Using our techniques, we are unable to detect any measurable velocity contrast in the mantle beneath the low-velocity body, and, hence, we are unable to determine whether the Yellowstone melting anomaly is associated with a deep heat source or with any deep phenomenon such as a convection plume, chemical plume, or gravitational anchor.     

What is A “Method”?

Using a recently published compilation of analytical data on reference samples SY-2, SY-3 and MRG-1 as an example, a case is presented in favor of more precise terminology in describing analytical methods used in reporting data in collaborative programs. The technique of final measurement in a particular method is often less important than earlier operations, such as sample attack or technique of separation.     

“Lag” — a geochemical sampling medium for arid regions

Desert land surfaces are commonly characterized by a veneer or pavement of siliceous and/or ferruginous stony material. This material can be shown in most cases to be predominantly bedrock-derived, despite often severe modification by prolonged weathering, and can therefore be selectively sampled and analyzed as an indicator of bedrock geochemistry in geochemical surveys.Most pavements probably owe their existence to the interaction of several dispersion mechanisms. However, a common factor in all cases is the concentration of coarse particles at the surface as a result of the selective removal by erosion of fine dilutant material. Hence, the preferred name when used in the geochemical context is “lag”.In lag sampling, particles in the range 2.0–6.0 mm are screened on site from the unconsolidated surface material. Material in this size range has been found to be quite uniformly distributed over a wide range of arid region environments, including areas where residual soils are severely diluted by transported alluvial and aeolian materials.Data from exploration programmes for Au, Cu-Pb-Zn-Ba, and Ni allow comparison of results for lag sampling with those for alternative sample media in a variety of arid region environments. Analysis of lag samples for Au, Cu and As clearly indicates the presence of bedrock Au mineralization in the Paterson and Eastern Goldfields Provinces of Western Australia. In these areas both lags and soils exhibit good anomaly contrast, but lags show more extensive lateral dispersion, leading to advantages in reconnaissance exploration.Strong anomalies for Ni and Cu are developed in lags, compared with subdued response in fine-fraction soils over a Ni sulphide occurrence in the Eastern Goldfields which has been subjected to deep lateritic weathering.Lag geochemistry also clearly reflects sub-economic base metal and barite occurrences in the McArthur Basin, N.T., in spite of the dilution of surface soils by sands probably related to a Mesozoic marine incursion. Orientation sampling over a Pb-Zn prospect in the Pine Creek Geosyncline has demonstrated optimum response in lag samples compared with various size fractions of the associated lithosols.Variable dilution of lag samples by coarse quartz sand can be a problem in areas with substantial transported overburden. A simple procedure to ‘correct’ trace-element values using regression analysis based on the Fe content of samples is described as a means of reducing ‘noise’ resulting from such matrix variations.     

The geoarchaeology of Iron Age “moated” sites of the Upper Mae Nam Mun Valley,N.E. Thailand. I: Palaeodrainage,site–landscape relationships and the origins of the “moats”

The study focuses on the “moated” Iron Age sites of N.E. Thailand, first identified as significant prehistoric settlement sites in the 1940s from aerial photography. Two more recent photograph sets are used to map the surficial geology and prehistoric site distribution for a study area west of Phimai, N.E. Thailand, with a focus on site–landscape relationships and, in particular, relationships between site location and form and patterns of palaeodrainage. The derived record of the surficial geology reflects several phases of palaeodrainage, characterized by differing locations and types of former river channels. Of note is the differentiation between a recent period in which river channels, including those presently active, are single-string meandering channels, and an older period of broad belts of meandering multistring channels. The prehistoric site distribution correlates closely with the older drainage, and for many, the encircling channels (the “moats”) are closely associated with former river channels. These relationships provide a critical and novel model for site distribution; several implications arise, supported by emerging field evidence, and introducing issues for archaeological debate: (i) there is no need, as has been done in the past, to invoke prehistoric artificial forms of drainage associated with the sites; (ii) the definition of the encircling channels as “moats” is seriously called into question; and (iii) the inferred geomorphological evolution of the floodplain implies past changes in environmental parameters such as run-off, climate or biophysical environments. Since the sites are all located in or beside ancient meander belts, these parameters should now be introduced into archaeological discussions regarding the establishment, history, evolution, and abandonment of the Iron Age sites. Methodologically, this article illustrates the need to be aware of the complexity of aerial photograph interpretation in archaeological survey, showing that careful analysis of aerial photograph information may have a significant impact upon the modeling of prehistoric interpretations. Further stratigraphical studies will be reported subsequently, and will refine the models presented here. © 1999 John Wiley & Sons, Inc.     

Thermal models of arcs and ridges — A “Source-span-sink” model

A theory of two-dimensional geothermic problems is elaborated by the active temperature function at the vertical contact of two horizontally layered media. The approach offered before for oceanic ridges is extended to the case of continental margins and the upper part of a descending slab, i.e. “sink”, in island-arc areas. It is assumed that the plate motion in the oceanic area exists; in a descending area it is directed downward but remains zero on a continental side. Mathematically it symbolizes a “source—span—sink” thermal model. Numerical parameters are given for a theoretical thermal model of the heat-flow profile across the Kuril island arc, from the trench through Iturup Island, Sakhalin Island and the Tatarian Trough.     

Isoprenoid alkanes with irregular “head-to-head” linkages

A lightly biodegraded crude oil from the Tolkinsk field (Upper Jurassic), situated in north-west Siberia, was found to contain a series of C₂₈–C₃₉ isoprenoid alkanes. Most of these components contain a pristane unit linked head-to-head with other isoprenoid units. The structures of these components were elucidated by mass spectral interpretations, comparisons with a synthesised standard and by reference to data published previously in the literature. These results extend the carbon number range, the variety of structural types, and the number of reported occurrences of these compounds in geological samples. These results provide further evidence for a contribution of bacterial cell-wall lipids to crude oils.     

The National Geodetic Survey project “POLARIS”

The National Geodetic Survey (N.G.S.) of the National Ocean Survey has undertaken a new project called POLar-motion Analysis by Radio Interferometric Surveying (POLA-RIS). The premier goal of the project is to establish a fully operational polar motion monitoring network, with a spatial resolution and accuracy of 10 cm and a temporal resolution of 24 hours. The new network will utilize radio interferometric techniques. The fixed POLARIS observatories may also serve as base stations to be used in conjunction with small-aperture, 3–10-m, mobile units for positional surveys for geodetic and geo-dynamic applications. The N.G.S. plans to cooperate fully with other governmental organizations having related responsibilities and interest in polar motion, earth rotation and geodynamics [e.g., National Aeronautics and Space Administration (NASA), United States Geological Survey (U.S.G.S.), United States Naval Observatory (U.S.N.O.)] as well as academic and private researchers.     

The “Red Rock Fault”, Cheshire: A critical review

The credentials of the so-called Red Rock Fault, along the eastern border of the Cheshire Plain, and at the boundary between the Trias or Permo-Trias on the west, and the Carboniferous rocks on the east, are examined from the published records. The conclusion reached is that the boundary probably represents an unconformity, not a fault. It may be taken to be a test case as to the authenticity of other well known and long established ‘faults’ in the structure of Britain.