Influence of structural framework on mountain slope deformation in the Maiella anticline (Central Apennines, Italy)

Relationships between tectonic framework and gravity-driven phenomena have been investigated in an area of the Central Apennines (Italy) characterised by high relief. The north–south, half-dome shaped Maiella anticline lies in the easternmost part of the Apennine fold-and-thrust belt. Its backlimb is bordered by the Caramanico Fault, a normal fault with a maximum downthrown of about 3.5 km that separates the western slope of the Maiella Massif from the Caramanico Valley. The southwestern Maiella area is affected by deep-seated gravitational slope deformation indicated by major double crest lines, down-hill and up-hill facing scarps, a pattern of crossing trenches, bulging at the base of slopes and the presence of different types of landslide and talus slope deposits.The onset and development of deep-seated gravitational slope deformations and the location of Quaternary, massive rockslope failures have been strongly influenced by the structural framework and tectonic pattern of the anticline. Deep-seated gravitational slope deformation at Mt. Macellaro–Mt. Amaro ridge has developed along the Maiella western, reverse slope in correspondence with the anticline axial culmination; it is bordered at the rear by a NNW–SSE oriented, dextral, strike-slip fault zone and has an E–W direction of rock mass deformation. Closer to the southern plunging area of the anticline, gravity-driven phenomena show instead a N–S and NW–SE direction, influenced by bedding attitude.3D topographic models illustrate the relationship between deep-seated gravitational slope deformation and massive rockslope failures. The Campo di Giove rock avalanche, a huge Quaternary failure event, was the result of an instantaneous collapse on a mountaine slope affected by a long-term gravity-driven deformation.     

Linking hydrological, infinite slope stability and land-use change models through GIS for assessing the impact of deforestation on slope stability in high Andean watersheds

In the Ecuadorian Andes, episodic slope movements comprising shallow rotational and translational slides and rapid flows of debris and soil material are common. Consequently, not only considerable financial costs are experienced, but also major ecological and environmental problems arise in a larger geographical area. Sediment production by slope movement on hillslopes directly affects sediment transport and deposition in downstream rivers and dams and morphological changes in the stream channels. In developing countries world-wide, slope movement hazards are growing: increasing population pressure and economic development force more people to move to potentially hazardous areas, which are less suitable for agriculture and rangelands.This paper describes the methods used to determine the controlling factors of slope failure and to build upon the results of the statistical analysis a process-based slope stability model, which includes a dynamic soil wetness index using a simple subsurface flow model. The model provides a time-varying estimate of slope movement susceptibility, by linking land-use data with spatially varying hydrologic (soil conductivity, evapotranspiration, soil wetness) and soil strength properties. The slope stability model was applied to a high Andean watershed (Gordeleg Catchment, 250 ha, southern Ecuadorian Andes) and was validated by calculating the association coefficients between the slope movement susceptibility map of 2000 and the spatial pattern of active slope movements, as measured in the field with GPS. The proposed methodology allows assessment of the effects of past and future land-use change on slope stability. A realistic deforestation scenario was presented: past land-use change includes a gradual fragmentation and clear cut of the secondary forests, as observed over the last four decades (1963–2000), future land-use change is simulated based on a binary logistic deforestation model, whereby it was assumed that future land-use change would continue at the same rate and style as over the last 37 years (1963–2000).     

Thermal history and exhumation of the Northern Apennines (Italy): evidence from combined apatite fission track and vitrinite reflectance data from foreland basin sediments

ABSTRACT Apatite fission track ages of 20 samples collected from turbidite successions deposited in foreland basins adjacent to the Northern Apennines range between ∼3 and ∼10 Ma. The youngest fission track ages are concentrated in a NW–SE elongated belt, which approximately runs through the centre of the study area, while gradually increasing ages are distributed towards the south-western and north-eastern borders. Integration of apatite fission track data and published vitrinite reflectance values indicate this region of the Apennines experienced continuous but variable exhumation starting from ∼14 Ma. The extent of exhumation and uplift range between 5 and 6 km at the south-western and north-eastern borders of the study area, and ∼7 km in the central part. Exhumation was driven mainly by erosion, with minor faulting in response to structural readjustment related to differential exhumation. Regional exhumation and erosion are interpreted as the result of isostatic rebound following crustal thickening in the lower part of the orogen.     

Quaternary tectonics and large-scale gravitational deformations with evidence of rock-slide displacements in the Central Apennines (central Italy)

Eight cases of large-scale gravitational movements (with evidence of rock-slide type displacements) evolving close to Quaternary faults have been analysed in the Central Apennines. Geomorphological and structural surveys have defined the relationship between the gravitational displacements and the tectonically-controlled modifications of the landscape. The evolution of all the investigated cases has been conditioned by the presence of fault planes located along the mountain slopes. In most cases (Mt. Cefalone, Cima della Fossa, Villavallelonga, Casali d'Aschi, Gioia dei Marsi), the faults played or are playing a primary role in increasing the local relief and their activity represents the main geomorphic factor conditioning the gravitational movements. This kind of relationship has been observed along mountain slopes bordering depressions which have not been drained for most of their geomorphic history or have been characterised by an evolution of the hydrographic network that has been conditioned only by the local tectonic subsidence. In such cases, the gravitational movements develop in the footwalls of the faults. In other cases (Fiamignano, Pescasseroli) the faults have played a passive role, since they only bound the sliding masses and coincide with the surficial expressions of the sliding planes. Therefore, the gravitational displacements develop in the hangingwall of the faults. The evolution is conditioned by the incision of the hydrographic network in response to regional Quaternary uplift. The illustrated case studies provide a wide range of examples of the gravitational response of slopes to the modifications of the landscape due to linear and areal tectonics. The identification of the geomorphic traces of the large-scale gravitational movements along fault-controlled mountain fronts has implications for hazard, particularly for the evolution of the displacement. The quantitative analysis of the vertical displacements and data on the characteristics of the surface breaking during historical earthquakes demonstrate that along-fault offsets strongly increases where the unstable large-scale rock masses are located. Therefore, the large coseismic vertical offset may represent a major problem for the displacement of utilities and may represent a potential cause for the sudden and catastrophic evolution of the gravitational movement.     

The statistical relationship between unconfined compressive strengths and the frequency distributions of slope gradients — A case study in northern Hungary

This paper focuses on the question of whether there is a deterministic connection between the slope gradient and unconfined compression strength (UCS) as a lithological factor and on describing the nature of this connection. Moreover, the authors determined the sensitive statistical parameters in the statistical surface analyses. The surface analyses were carried out in an area extending over 1500 km² in northern Hungary and containing parts of the uplifted Palaeozoic and Mesozoic basement and the semi-consolidated material of the Palaeogene and Neogene molasse sediments.The 67 geological formations of the area were grouped into 10 petrophysical categories characterised by unconfined compressive strength as a petrophysical parameter. The geological database was the digitalized geological map of North Hungarian Region (1 : 100 000). The digital topographic database was based on 10 m contour lines of 1 : 50 000 maps, the digital elevation model was generated by kriging interpolation. Three topographic models were created with resolutions of 25 × 25, 50 × 50 and 100 × 100 m per pixels.Evident correlation can be shown between the UCS and the relative frequency of the slope gradient. The adequate regression procedure is the power regression for low slope category values while logarithmic regression is applicable at high slope angles. Based on the characteristic of the relationship and the value of r², slope category intervals can be identified the relative frequency of which is proven to be determined by the UCS. These intervals are found to be between 4–10%, 10–16%, 16–22%, 22–44% and over 44%.Using the determination equations of slope gradient between 4–10% and over 44%, the UCS of the bedrock can be calculated approximately as the average value of the two calculated results. So the quotient of the frequency of these two category intervals can be regarded as an important morphometric index for a given bedrock.From the aspect of petrophysical characteristics, the rock with UCS between 6 and 86 MPa were proven to be deterministic for the slope development i.e. in the determination of the slope category frequencies. Applying the relative frequency of slope gradients a relative erosion resistance of the petrophysical categories can be calculated.Considering the determination coefficients, among the statistical parameters of the distribution of slope category values the standard deviation, mode, mean and median proved to be determined by the UCS of the bedrock.     

Bankfull width and morphological units in an alpine stream of the dolomites (Northern Italy)

This research examines variations in bankfull cross-sections along a steep stream of the Dolomites (Cordevole stream, Belluno, Northern Italy). Field measurements were conducted to determine variations in the channel top-width at bankfull stage in relation to the drainage area and to the length of the flow path. After grouping the bed morphologies according to the Montgomery and Buffington [Montgomery, D.R., Buffington, J.M., 1997. Channel-reach morphology in mountain drainage basins. Geol. Soc. of Am. Bull. 109 (5) 596–611.] classification, we analyzed the increase in bankfull width for the dominant stream units (cascades, step pools, isolated pools and colluvial reaches at the head of the basin). We observed that the morphologies more related to the drainage area are colluvial reaches and pools; the less adaptable are steps and cascades. These differences likely result from the absence of lateral constriction in the colluvial reaches and pools, whereas the presence of coarser sediments in the bed can affect the transverse adjustments in steps and reaches dominated by cascades. Linkages between cross-section geometry and parameters related to flow (i.e. drainage area and stream power) have been analyzed together with the distribution of surface grain sizes and its coarsening pattern. The existence of distinctive bankfull widths between different morphological units points out the degree of susceptibility to be modeled according to the channel slope, reference diameter (D₉₀), and contributing area.     

Normal faulting, extension and uplift in the outer thrust belt of the central Apennines (Italy): role of the Caramanico fault

The outer Adriatic zones of the central Apennines (Italy) provide good conditions for analysing geometry and kinematics of the earliest normal faults, superposed onto the thrust belt. During the latest stages of thrusting onto the Adriatic foreland (late Pliocene–early Pleistocene), the outermost imbricates of the thrust belt were subjected to normal faulting, coeval with differential uplift. Crosscutting normal faults get younger towards the foreland, thus the easternmost normal faults record the latest stages of fault propagation and growth. The Caramanico fault, on the western flank of Mt. Maiella, is the largest outcropping normal fault of the outer zones. This high‐angle fault (dip > 70°) has cumulative offsets ≤ €4.2 km, and propagated with slip rates of 2.6 mm/year in a short time interval (≤ 1.6 Ma), concomitant with intense uplift of Mt. Maiella. In contrast with normal faults in a more internal position, the Caramanico fault maintains a high‐angle planar geometry, and does not reach the major basal detachment of the thrust belt. Thus the fault did not cause large extensional displacements; its major role was rather to accommodate ongoing components of vertical uplift of the overthickened thrust wedge. Downfaulting of the thrust belt on the western flank of Mt. Maiella represents the youngest end member of the same processes that have operated since 11 Ma in the Tyrrhenian hinterland, where large extensional strains and crustal thinning of the orogenic belt were achieved by long‐lasting activity of listric normal faults detached at lower crustal depths.     

Geological and geomorphological evolution of the Etna volcano NE flank and relationships between lava flow invasions and erosional processes in the Alcantara Valley (Italy)

In this paper, the interrelationships between volcanic activity and fluvial events in the Alcantara Valley are investigated. Based on the correlation between the stratigraphy of the NE flank of Mt Etna and subsurface data, the geological and geomorphological evolutions of the valley are reconstructed. New 1:10 000 scale geological mapping shows that the bulk of this sector of the volcano is made up of the Ellittico volcano lava flows, though they are widely covered by the products of the eruptive activity of the last 15 ka. The present-day morphological setting of the Alcantara Valley is the result of two main evolutionary phases initiated during the activity of the Ellittico volcano. Only one lava flow invasion of the valley floor occurred in the first phase. This phenomenon was followed by a long period of erosional processes leading to the entrenchment of the drainage pattern and the erosion of the Ellittico lava flow. About 20–25 ka ago, an important change in the frequency of the lava flow invasions into the valley occurred associated with the final stage of the Ellittico volcano activity marking the beginning of the second phase. During this phase, volcanic processes became predominant with respect to other morphogenetic processes in the Alcantara Valley. Lava flows coming from the NE flank of the Ellittico volcano caused a radical modification of the morphological setting of this area, even though only one lava flow emitted by an eruptive fissure located within the valley partially filled the riverbed. During the eruptive activity of the last 15 ka, the complete filling of the Alcantara Valley floor occurred. In particular, between 15 and 7 ka, a lava flow originated from the Mt Moio scoria cone filled the valley floor for a distance of about 9 km. Following a short period of erosion, an eruptive fissure located within the valley generated a 20–21-km-long lava flow that was channelled along the full extent of the Alcantara Valley and stretches for about 3 km offshore in the Ionian sea. In the last 7 ka, lava flows originating from the NE-Rift zone produced only temporary damming of the riverbed without any important contribution to the filling of the Alcantara Valley.     

Differences in production and mortality of reproductive structures in two Prosopis L. (Mimosaceae) shrub species from Patagonia, Argentina

Prosopis L. pods have been proposed as a source of gum (galactomannans), with potential applications as a thickening agent in the food industry. The objective of this work was to compare, under field conditions, the production and mortality of reproductive structures in two sympatric shrub species of Prosopis: P. alpataco Phillipi and P. denudans Bentham. Our results indicate that fruit production in Prosopis denudans and P. alpataco is very low and erratic in non-irrigated lands. Although large quantities of flowers (15,000–25,000 flowers*0.40 m⁻²) can be found in one flowering season, 70–80% are shed before they reach anthesis and 20–28% are aborted between anthesis and fruit set. We conclude that the utilization of native populations of Prosopis denudans and P. alpataco for fruit production in Patagonian steppe, could not guarantee a consistent supply for the food industry.     

乌鲁木齐大气混合层厚度和稳定度与大气污染的关系

利用乌鲁木齐市4座10层100 m梯度气象塔2013年6月~2014年4月气象观测资料和7个环境监测站[WTBX]AQI[WTBZ]资料,计算并分析了大气混合层厚度和稳定度特征,探讨了大气混合层厚度和稳定度与污染的关系。结果表明：乌鲁木齐市混合层厚度夏季郊区高、城区低,冬季从南郊—城区—北郊随地势降低依次降低;夏季和冬季分别在1 559～1 772 m和526～1 156 m之间。地面至2 km以上每500 m高度间隔统计混合层厚度,500～1 000 m出现频率最多;月变化为6～9月基本在500 m以上,且每个高度区间其概率均超过10%,10月～次年2月1 500 m以上区间概率明显减小;日变化为中午13:00～16:00达到最高值,下午和傍晚迅速下降。白天较大的感热输送提供充足的热力条件,这也体现出白天以不稳定层结为主,夜间则以稳定层结为主。大气稳定度分类结果,夏季郊区和城区不稳定（A～C类）所占比例差不多,冬季北郊稳定（E、F类）所占比较最大、城区最弱。[WTBX]AQI指数冬季最大,从南郊—城区—北郊依次增大,这与采暖期污染物多、南郊比北郊地势高有利于扩散输送有关。总体来看,乌鲁木齐大气混合层厚度空间分布与气象要素、大气稳定度、地形等密切相关,对AQI[WTBZ]指数分布有重要影响,这对近地层大气污染状况预报有着重要的指导意义。     

Rare earth elements of aeolian deposits in Northern China and their implications for determining the provenance of dust storms in Beijing

This paper contributes to a better understanding of the source of dust storms in northern China and the relationship between these sources and other aeolian sediments in this region. Sediment samples in potential source areas were collected from the Hunshandake Sandy Land, Heaven Desert, the loess deposits of the Bashang area, the mountainous basins and valleys north of Beijing and from the Badain Jaran Desert and Hulunbaier Sandy Land (Fig. 1). Dust samples were collected in Beijing during two dust storms in March 2002 and April 2006. The laboratory methods used in this study included measurements of abundance of trace elements, in particular the rare earth elements (REEs), mineral assemblages and grain size. The REE contents, Eu and Ce anomalies show clear differences between various deposits. Provenance is considered to be the key factor influencing REE patterns in the study areas. The REE abundances and patterns indicate that the aeolian sand north of Beijing, such as in the Heaven Desert, is mainly of local origin rather than from desert encroachment from the north. The mineral grains carried in dust storms, however, are highly mixed, and may come partly from local sources but mainly from distant desert regions in western China.     

Energy dissipation caused by boundary resistance in a typical reach of the lower Yellow River and the implications for riverbed stability

The energy dissipation of boundary resistance is presented in this paper based on the flow resistance. Additionally, the river morphology responses to the resistance energy dissipation are explored using the Gaocun-Taochengpu reach in the lower Yellow River as a prototype. Theoretical analysis, measured data analysis and a one-dimensional hydrodynamic model are synthetically used to calculate the energy dissipation rate and riverbed morphological change. The results show that the energy dissipat...     

Stability of streambanks formed in partially saturated soils and effects of negative pore water pressures: the Sieve River (Italy)

Streambanks of alluvial channels are usually composed of loose materials, which are unsaturated in ambient conditions. Unsaturated soils are subject to negative pore water pressures, which cause an apparent cohesion. The latter is the main factor in allowing the stability of near-vertical banks. Even during moderate in-bank flow events, the apparent cohesion can be strongly reduced as the material approaches full saturation; therefore, during the drawdown phase, as the confining pressure of the water in the channel disappears, a bank failure is likely to occur. Channel bed-level lowering along the Sieve River, Central Italy, has caused widespread bank instability. A geomorphological reconnaissance of forms and processes was followed by in situ tests to determine the shear strength of the banks. Interpretation of the tests and a streambank stability analysis were based on concepts of soil mechanics for unsaturated soils, in order to obtain relations between bank angle and height in limit equilibrium conditions. A stability chart was obtained with curves for different apparent cohesion values, and a stability analysis was performed taking into account the effects of flow events. In order to investigate the pore pressure effects, a series of piezo-tensiometers were installed in a streambank of the Sieve River. Data from a 1 year monitoring period show variations in pore water pressure and matric suction as a consequence of rainfall, evapotranspiration, and water stage variations. A planar failure with a tension crack occurred in the upper cohesive part of the bank during December 1996. The safety factor has been expressed as a function of the geometry of the bank and of the shear strength of the material. Safety factor variations through time are therefore shown as a function of seasonal variations in matric suction.     

Peat layer accumulation and post‐burial deformation during the mid‐late Holocene in the Po coastal plain (Northern Italy)

Peat horizons are characteristic features of delta plains worldwide. In this study, we tested the use of peat‐based correlations to assess the deformation of Holocene strata in the Po coastal plain (Northern Italy). The Holocene stratigraphy, about 30 km inland from the modern coastline consists of a peat‐bearing, estuarine and deltaic succession, up to 23 m thick. Through the analysis of 31 core data and 100 piezocone penetration tests, we identified and mapped three 10–40 cm‐thick peat layers (T1–T3) dated to 6.6–5.8, 5.5–5.0 and 3.3–2.7 cal kyr BP respectively. These peat horizons were found to be suitable stratigraphic markers within the Holocene succession over an area of about 200 km². The mid‐late Holocene palaeogeography, reconstructed through high‐resolution peat correlation, supported by 72 radiocarbon dates, highlights a typical upper delta plain environment, with ribbon‐shaped distributary channels and swamp interdistributary areas. Peat layers are inclined towards E‐NE with gradients that increase downsection from ~0.016% (T3) to 0.021% (T1). The gradient of the oldest peat horizon is one order of magnitude larger than the slope of the modern delta plain (~0.0025%). We infer that peat horizons accumulated during periods of low sediment supply mainly controlled by autogenic processes and were deformed after deposition. Differential compaction of underlying sedimentary strata and recent tectonic activity of the buried Apenninic thrust systems are the most likely drivers of strata deformation. Based on isochore maps, we document that higher sedimentation rates in topographically depressed areas compensated, in part at least, the ongoing deformation, keeping unaltered the topographic gradient and the depositional environment. This study demonstrates that peat‐based correlation and mapping can shed lights on the mechanisms of strata accumulation and deformation in deltaic settings, constituting a robust basis for reconstructing delta evolution.     

Synsedimentary tensional features in Upper Triassic shallow-water platform carbonates of the Carnian Prealps (northern Italy) and their importance as palaeostress indicators

The extensive shallow-water carbonate platform deposits of the Dolomia Principale Formation (Southern Alps, northern Italy) accumulated during the Late Triassic, a time of plate-scale reorganization and rifting. Synsedimentary tensional features such as fractures, neptunian dykes, normal faults, shatter breccias and laterally discordant intraformational breccias have been studied within a well-preserved platform-to-basin transition in the Monte Pramaggiore area (Carnian Prealps). These tensional features follow three preferential orientations: N–S, E–W and NE–SW. To fully explain these different arrays it is proposed that the study area experienced during the Late Triassic the waning rifting phase connected to the westward propagation of the NeoTethys (N–S extension) and the onset of the rifting phase that led in the Middle Jurassic to the opening of the Central Atlantic (E–W extension), with a contemporaneous reactivation of Early–Middle Triassic NE–SW-orientated faults. This palaeostress analysis reveals the good potential of tensional features as reliable palaeostress indicators.