Probing the deep critical zone beneath the Luquillo Experimental Forest,Puerto Rico

Recent work has suggested that weathering processes occurring in the subsurface produce the majority of silicate weathering products discharged to the world's oceans, thereby exerting a primary control on global temperature via the well‐known positive feedback between silicate weathering and CO₂. In addition, chemical and physical weathering processes deep within the critical zone create aquifers and control groundwater chemistry, watershed geometry and regolith formation rates. Despite this, most weathering studies are restricted to the shallow critical zone (e.g. soils, outcrops). Here we investigate the chemical weathering, fracturing and geomorphology of the deep critical zone in the Bisley watershed in the Luquillo Critical Zone Observatory, Puerto Rico, from two boreholes drilled to 37.2 and 27.0 m depth, from which continuous core samples were taken. Corestones exposed aboveground were also sampled. Weathered rinds developed on exposed corestones and along fracture surfaces on subsurface rocks slough off of exposed corestones once rinds attain a thickness up to ~1 cm, preventing the corestones from rounding due to diffusion limitation. Such corestones at the land surface are assumed to be what remains after exhumation of similar, fractured bedrock pieces that were observed in the drilled cores between thick layers of regolith. Some of these subsurface corestones are massive and others are highly fractured, whereas aboveground corestones are generally massive with little to no apparent fracturing. Subsurface corestones are larger and less fractured in the borehole drilled on a road where it crosses a ridge compared with the borehole drilled where the road crosses the stream channel. Both borehole profiles indicate that the weathering zone extends to well below the stream channel in this upland catchment; hence weathering depth is not controlled by the stream level within the catchment and not all of the water in the watershed is discharged to the stream. Copyright © 2013 John Wiley & Sons, Ltd.     

Vertical Hydraulic Gradient Estimation in Clay Till,Using MiHPT Advanced Direct-Push Technology

The vertical transport of contaminants from source areas is employed in many risk assessment models and screening tools in order to estimate the contaminant mass discharge (CMD) into underlying aquifers. The key parameters for estimating CMD are the contaminant source area and concentration, and the vertical water flux, the latter of which depends on the vertical hydraulic conductivity and the vertical hydraulic gradient in the subsurface. This study focuses on advancing the use of the combined membrane interface probe hydraulic profiling tool (MiHPT) to investigate the vertical hydraulic gradient across a clay till overlying a sandy aquifer at a contaminated site in Denmark. Only the HPT is necessary for the estimate of vertical hydraulic gradient. The hydraulic head, clay till thickness, and resulting vertical hydraulic gradients found using the MiHPT compared well with observations from nearby nested wells. The parameter with the largest discrepancy was the thickness of the clay till. The advantage of the MiHPT is its relatively quick depth discrete access to information regarding subsurface permeability, vertical hydraulic gradients and contaminant distribution across a site. In this case study, performance of additional dissipationtests during the HPT log to acquire determination of the vertical hydraulic gradient increased the cost by 3% compared to standard HPT logs.     

A low‐dimensional model of bedrock weathering and lateral flow coevolution in hillslopes: 2. Controls on weathering and permeability profiles,drainage hydraulics,and solute export pathways

The advance of a chemical weathering front into the bedrock of a hillslope is often limited by the rate weathering products that can be carried away, maintaining chemical disequilibrium. If the weathering front is within the saturated zone, groundwater flow downslope may affect the rate of transport and weathering—however, weathering also modifies the rock permeability and the subsurface potential gradient that drives lateral groundwater flow. This feedback may help explain why there tends to be neither “runaway weathering” to great depth nor exposed bedrock covering much of the earth and may provide a mechanism for weathering front advance to keep pace with incision of adjacent streams into bedrock. This is the second of a two‐part paper exploring the coevolution of bedrock weathering and lateral flow in hillslopes using a simple low‐dimensional model based on hydraulic groundwater theory. Here, we show how a simplified kinetic model of 1‐D rock weathering can be extended to consider lateral flow in a 2‐D hillslope. Exact and approximate analytical solutions for the location and thickness of weathering within the hillslope are obtained for a number of cases. A location for the weathering front can be found such that lateral flow is able to export weathering products at the rate required to keep pace with stream incision at steady state. Three pathways of solute export are identified: “diffusing up,” where solutes diffuse up and away from the weathering front into the laterally flowing aquifer; “draining down,” where solutes are advected primarily downward into the unweathered bedrock; and “draining along,” where solutes travel laterally within the weathering zone. For each pathway, a different subsurface topography and overall relief of unweathered bedrock within the hillslope is needed to remove solutes at steady state. The relief each pathway requires depends on the rate of stream incision raised to a different power, such that at a given incision rate, one pathway requires minimal relief and, therefore, likely determines the steady‐state hillslope profile.     

Bidirectional stream–groundwater flow in response to ephemeral and intermittent streamflow and groundwater seasonality

It is often assumed that the net groundwater flow direction is towards the channel in headwater streams in humid climates, with magnitudes dependent on flow state. However, studies that characterize stream–groundwater interactions in ephemeral and intermittent streams in humid landscapes remain sparse. Here, we examined seasonally driven stream–groundwater interactions in response to temporary streamflow on the basis of field observations of streamflow and groundwater on an adjacent hillslope. The direction of hydraulic head gradients between the stream and groundwater shifted seasonally. The stream gained water (head gradients were towards the stream) when storage state was high. During this period, streamflow was persistent. The stream lost water to the groundwater system (head gradients were away from the stream) when storage state was low. During this period, streamflow only occurred in response to precipitation events, and head gradients remained predominantly away from the stream during events. This suggested that mechanisms other than deep groundwater contributions produced run‐off when storage was low, such as surface and perched subsurface flowpaths above the water table. Analysis of the annual water balance for the study period showed that the residual between precipitation inputs and streamflow and evapotranspiration outputs, which were attributed to the loss of water to the deeper, regional groundwater system, was similar in magnitude to streamflow. This, coupled with results that showed bidirectionality in stream–groundwater head gradients, indicated that headwaters composed of temporary (e.g., ephemeral and intermittent) streams can be important focal areas for regional groundwater recharge, and both contribute to and receive water, solutes, and materials from the groundwater system.     

The exponential decline in saturated hydraulic conductivity with depth: a novel method for exploring its effect on water flow paths and transit time distribution

The strong vertical gradient in soil and subsoil saturated hydraulic conductivity is characteristic feature of the hydrology of catchments. Despite the potential importance of these strong gradients, they have proven difficult to model using robust physically based schemes. This has hampered the testing of hypotheses about the implications of such vertical gradients for subsurface flow paths, residence times and transit time distribution. Here we present a general semi‐analytical solution for the simulation of 2D steady‐state saturated‐unsaturated flow in hillslopes with saturated hydraulic conductivity that declines exponentially with depth. The grid‐free solution satisfies mass balance exactly over the entire saturated and unsaturated zones. The new method provides continuous solutions for head, flow and velocity in both saturated and unsaturated zones without any interpolation process as is common in discrete numerical schemes. This solution efficiently generates flow pathlines and transit time distributions in hillslopes with the assumption of depth‐varying saturated hydraulic conductivity. The model outputs reveal the pronounced effect that changing the strength of the exponential decline in saturated hydraulic conductivity has on the flow pathlines, residence time and transit time distribution. This new steady‐state model may be useful to others for posing hypotheses about how different depth functions for hydraulic conductivity influence catchment hydrological response. Copyright © 2016 John Wiley & Sons, Ltd.     

The lateral and vertical growth of laterite weathering profiles,Hawaiian Islands,USA

The Hawaiian Islands permit investigation of tropical chemical weathering rates and processes on a single rock type, basalt. Chronosequences are investigated as a function of rainfall due to the varying age of each island, including Kauai (~4 Ma), Oahu (~2 Ma), and Hawaii's Kohala Peninsula (~0.3 to 0.17 Ma). Understanding tropical critical zone (CZ) development is vital given the large populations in developing countries that rely on it. HVSR (horizontal-to-vertical spectral ratio) seismic soundings on Kauai indicate that ~60% of the variability in laterite thickness is due to gradients in precipitation, with errors in erosion corrections and variability in the original permeability structure of the volcanic sequence playing important roles. Basalts have higher horizontal than vertical hydraulic conductivity (K_h > K_v) , and local variability in likely drives much of the remaining differences in laterite thickness. HVSR is well suited for estimating laterite thickness as it has been shown to reliably detect the base of the weathering profile, is rapid (20 min/sounding), highly portable, and occupies a very small footprint. Comparison of Kauai and Oahu weathering profiles suggests that the Oahu laterites are fully or nearly fully formed, despite being half the age of Kauai. By contrast, the young laterites on Kohala (~170 to ~300 ka) exhibit greatly contrasting thicknesses, where coastal laterites are thick and interior laterites are thin, suggesting that early weathering on shield volcanoes produces wedge-shaped laterites near the coast. With time, the thick (coastal) end of the wedge propagates upslope such that a fully developed, constant-thickness laterite carapace can form in ~2 Ma or less. The development of thickened coastal laterites on young substrates depends on greater water–rock ratios as vertically infiltrating water upslope is diverted laterally. This view of laterite development is very different compared to endmember models of continental weathering and CZ development. © 2020 John Wiley & Sons, Ltd.     

Geomorphological problems of the middle reaches of the Tsangpo River,Tibet

The middle reaches of the Tsangpo River consist of alternating sections of wide valleys and gorges. The wide valley sections have braided and anastomosing channels, gentle hydraulic gradients, thick alluvial deposits and low terraces. In contrast, the gorge sections exhibit single, straight and deeply entrenched meandering channels with steep hydraulic gradients, bare rock river beds and higher terraces. Several hypotheses have been used to explain these unusual fluvial landforms, but geological, landform and sedimentary analyses along with dating information, suggest that the key could be the active faults across the river valley. All gorge sections are located on the upthrown side of active faults, which mainly occurred in or after the Pliocene, whilst the wide valley sections appear on the downthrown side. The faulting blocked the river and caused the formation of palaeolakes, with thick deposits laid down behind the faults. Therefore, depositional wide valleys were formed and old terraces were buried. On these downthrown sides of the faults, braided and anastomosing channels have developed. On the upthrown sides, strong incision of the river occurred because of the changes of the local base levels and river gradients. As a result, deep gorges and deeply entrenched meandering channels formed in various lithologies. The terraces on the gorge slope indicate different stages of river incision and the related knick points appeared close to the local active faults. Rock resistance is only a minor influence on the alternation of valley forms and river gradients in this area. © 1998 John Wiley & Sons, Ltd.     

Conceptualization of the hydrogeological system of some sedimentary aquifers in Savelugu–Nanton and surrounding areas,Northern Ghana

Groundwater resources play a pivotal role in the rural water delivery system in Ghana. The hydrogeological system of Middle Voltaian terrain was simulated using available data on hydraulic heads and boundary conditions. The objective was to characterize the general groundwater flow pattern and provide local estimates of the distribution of hydraulic conductivity and recharge fields. The results suggest a predominant NE–SW flow direction, which ties in with the general regional structural trend and indicates that the hydrogeological conditions of the rocks are controlled by structural entities created in the wake of fracturing and/or weathering of the rocks whose primary permeabilities are considerably reduced because of high compaction and low‐grade metamorphism. Calibrated hydraulic conductivities range between 1.90 and 10.81 m/d. The spatial distribution appears to reflect the intensity of fracturing and/or weathering of the rock and the proportion of the clay fraction of the weathered zone. Vertical groundwater recharge has been estimated to range between 0.3% and 4.1% of the annual rainfall. This recharge rate is quite low and reflects the imperviousness of the thick overburden because of high clay content in some places and high compaction in others. Despite this apparently low recharge rate, groundwater resources potential in the area appear to be high, and increased abstraction from existing abstraction wells by up to 50% does not appear to register significant effects on groundwater budgets at the simulated recharge rates. This suggests that the well yields are much lower than the potential of the aquifer system. The apparently low yields might be associated with poor well development and the choice of inappropriate well completion materials. This study recommends a monitoring system to be developed for a much more regional groundwater flow simulation under transient conditions. Copyright © 2012 John Wiley & Sons, Ltd.     

Colonization and weathering of engineering materials by marine microorganisms: an SEM study

Microorganisms are a ubiquitous feature of most hard substrata on Earth and their role in the geomorphological alteration of rock and stone is widely recognized. The role of microorganisms in the modification of engineering materials introduced into the intertidal zone through the construction of hard coastal defences is less well understood. Here we use scanning electron microscopy (SEM) to examine microbial colonization and micro‐scale geomorphological features on experimental blocks of limestone, granite and marine concrete after eight months' exposure in the intertidal zone in Cornwall, UK. Significant differences in the occurrence of microbial growth features, and micro‐scale weathering and erosion features were observed between material types (ANOVA p < 0·000). Exposed limestone blocks were characterized by euendolithic borehole erosion (99% occurrence) within the upper 34·0 ± 12·3 µm of the surface. Beneath the zone of boring, inorganic weathering (chemical dissolution and salt action) had occurred to a depth of 125·0 ± 39·0 µm. Boring at the surface of concrete was less common (27% occurrence), while bio‐chemical crusting was abundant (94% occurrence, mean thickness 45·1 ± 27·7 µm). Crusts consisted of biological cells, salts and other chemical precipitates. Evidence of cryptoendolithic growth was also observed in limestone and concrete, beneath the upper zone of weathering. On granite, biological activity was restricted to thin epilithic films (<10 µm thickness) with some limited evidence of mechanical breakdown. Results presented here demonstrate the influence of substratum lithology, hardness and texture on the nature of early micro‐scale colonization, and the susceptibility of different engineering materials to organic weathering and erosion processes in the intertidal zone. The implications of differences in initial biogeomorphic responses of materials for long‐term rock weathering, ecology and engineering durability are discussed. Copyright © 2010 John Wiley & Sons, Ltd.     

Are open fractures necessarily aligned with maximum horizontal stress?

Fluid flow in fractured rock is an increasingly central issue in recovering water and hydrocarbon supplies and geothermal energy, in predicting flow of pollutants underground, in engineering structures, and in understanding large-scale crustal behaviour. Conventional wisdom assumes that fluids prefer to flow along fractures oriented parallel or nearly parallel to modern-day maximum horizontal compressive stress, or S_Hmax. The reasoning is that these fractures have the lowest normal stresses across them and therefore provide the least resistance to flow. For example, this view governs how geophysicists design and interpret seismic experiments to probe fracture fluid pathways in the deep subsurface. Contrary to these widely held views, here we use core, stress measurement, and fluid flow data to show that S_Hmax does not necessarily coincide with the direction of open natural fractures in the subsurface (>3 km depth). Consequently, in situ stress direction cannot be considered to predict or control the direction of maximum permeability in rock. Where effective stress is compressive and fractures are expected to be closed, chemical alteration dictates location of open conduits, either preserving or destroying fracture flow pathways no matter their orientation.     

Effects of macro-pores on water flow in coastal subsurface drainage systems

Leaching through subsurface drainage systems has been widely adopted to ameliorate saline soils. The application of this method to remove salt from reclaimed lands in the coastal zone, however, may be impacted by macro-pores such as crab burrows, which are commonly distributed in the soils. We developed a three-dimensional model to investigate water flow in subsurface drainage systems affected by macro-pores distributed deterministically and randomly through Monte Carlo simulations. The results showed that, for subsurface drainage systems under the condition of continuous surface ponding, macro-pores increased the hydraulic head in the deep soil, which in turn reduced the hydraulic gradient between the surface and deep soil. As a consequence, water infiltration across the soil surface was inhibited. Since salt transport in the soil is dominated by advection, the flow simulation results indicated that macro-pores decreased the efficiency of salt leaching by one order of magnitude, in terms of both the elapsed time and the amount of water required to remove salt over the designed soil leaching depth (0.6 m). The reduction of the leaching efficiency was even greater in drainage systems with a layered soil stratigraphy. Sensitivity analyses demonstrated that with an increased penetration depth or density of macro-pores, the leaching efficiency decreased further. The revealed impact of macro-pores on water flow represents a significant shortcoming of the salt leaching technique when applied to coastal saline soils. Future designs of soil amelioration schemes in the coastal zone should consider and aim to minimize the bypassing effect caused by macro-pores.     

Spheroidal weathering of granite porphyry with well‐developed columnar joints by oxidation,iron precipitation,and rindlet exfoliation

Spheroidal weathering, one of the important rock weathering styles, has been attributed to chemical weathering by the water from joint surfaces, and mechanical aspects of the weathering have not been well addressed. We made an investigation on spheroidal weathering of Miocene granite porphyry with well‐developed columnar joints and found that this spheroidal weathering proceeds through chemical processes and accompanying mechanical processes. The investigation of the textures, physical properties, mineralogy, and chemistry of the porphyry revealed the presence of a brown band on the surface margins of corestones, representing the oxidation of pyrite and chlorite, and the precipitation of iron hydroxides, and the consequent generation of micro‐cracks within the band. During weathering, oxidation progresses inwards from joints that surround the rindlets, including both high‐angle columnar and low‐angle planar joints, and causes rounding of the unweathered interior portion of the rock. Microscopic observations of the brown band embedded with fluorescent resin show that pores are first filled with iron hydroxides, and that micro‐cracks then form parallel to the oxidation front in the outer portion of the brown band. Iron hydroxide precipitation increases the P‐wave velocity in the brown band, while micro‐crack formation decreases the tensile strength of the rock. Where the brown band has thickened to ~6 cm, the micro‐cracks are connected to one another to create continuous cracks, which separate the rindlets from the corestone. Micro‐crack formation parallel to the corestone surface may be attributed to compressive stresses generated by small amounts of volumetric expansion due to the precipitation of iron hydroxides in the brown band. Earth surface is under oxidizing environments so that precipitation of iron hydroxides commonly occurs; the spheroidal weathering in this paper is a typical example of the combination of chemical and mechanical processes under such environments. Copyright © 2016 John Wiley & Sons, Ltd.     

Hydrologic functioning of the deep critical zone and contributions to streamflow in a high‐elevation catchment: Testing of multiple conceptual models

High‐elevation mountain catchments are often subject to large climatic and topographic gradients. Therefore, high‐density hydrogeochemical observations are needed to understand water sources to streamflow and the temporal and spatial behaviour of flow paths. These sources and flow paths vary seasonally, which dictates short‐term storage and the flux of water in the critical zone (CZ) and affect long‐term CZ evolution. This study utilizes multiyear observations of chemical compositions and water residence times from the Santa Catalina Mountains Critical Zone Observatory, Tucson, Arizona to develop and evaluate competing conceptual models of seasonal streamflow generation. These models were tested using endmember mixing analysis, baseflow recession analysis, and tritium model “ages” of various catchment water sources. A conceptual model involving four endmembers (precipitation, soil water, shallow, and deep groundwater) provided the best match to observations. On average, precipitation contributes 39–69% (55 ± 16%), soil water contributes 25–56% (41 ± 16%), shallow groundwater contributes 1–5% (3 ± 2%), and deep groundwater contributes ~0–3% (1 ± 1%) towards annual streamflow. The mixing space comprised two principal planes formed by (a) precipitation‐soil water‐deep groundwater (dry and summer monsoon season samples) and (b) precipitation‐soil water‐shallow groundwater (winter season samples). Groundwater contribution was most important during the wet winter season. During periods of high dynamic groundwater storage and increased hydrologic connectivity (i.e., spring snowmelt), stream water was more geochemically heterogeneous, that is, geochemical heterogeneity of stream water is storage‐dependent. Endmember mixing analysis and ³H model age results indicate that only 1.4 ± 0.3% of the long‐term annual precipitation becomes deep CZ groundwater flux that influences long‐term deep CZ development through both intercatchment and intracatchment deep groundwater flows.     

Screening for Heat Transport by Groundwater in Closed Geothermal Systems

Heat transfer due to groundwater flow can significantly affect closed geothermal systems. Here, a screening method is developed, based on Peclet numbers for these systems and Darcy's law. Conduction‐only conditions should not be expected where specific discharges exceed 10^?8 m/s. Constraints on hydraulic gradients allow for preliminary screening for advection based on rock or soil types. Identification of materials with very low hydraulic conductivity, such as shale and intact igneous and metamorphic rock, allow for analysis with considering conduction only. Variability in known hydraulic conductivity allows for the possibility of advection in most other rocks and soil types. Further screening relies on refinement of estimates of hydraulic gradients and hydraulic conductivity through site investigations and modeling until the presence or absence of conduction can be confirmed.     

Weathering the escarpment: chemical and physical rates and processes,south‐eastern Australia

Differences in chemical weathering extent and character are expected to exist across topographic escarpments due to spatial gradients of climatic and/or tectonic forcing. The passive margin escarpment of south‐eastern Australia has a debated but generally accepted model of propagation in which it retreated (within 40 Ma) to near its current position following rifting between Australia and New Zealand 85–100 Ma before present. We focus on this escarpment to quantify chemical weathering rates and processes and how they may provide insight into scarp evolution and retreat. We compare chemical weathering extents and rates above and below the escarpment using a mass balance approach coupling major and trace element analyses with previous measurements of denudation rates using cosmogenic nuclides (¹⁰Be and ²⁶Al). We find a slight gradient in saprolite chemical weathering rate as a percentage of total weathering rate across the escarpment. The lowlands area, encompassing the region extending from the base of the escarpment to the coast, experiences a greater extent of chemical weathering than the highland region above the escarpment. Percents of denudation attributable to saprolite weathering average 57 ± 6% and 47 ± 7% at low and high sites respectively. Furthermore, the chemical index of alteration (CIA), a ratio of immobile to mobile oxides in granitic material that increases with weathering extent, have corresponding average values of 73·7 ± 3·9 and 65·5 ± 3·4, indicating lower extents of weathering above the escarpment. Finally, we quantify variations in the rates and extent of chemical weathering at the hillslope scale across the escarpment to suggest new insight into how climate differences and hillslope topography help drive landscape evolution, potentially overprinting longer term tectonic forcing. Copyright © 2009 John Wiley & Sons, Ltd.     

The critical role of climate and saprolite weathering in landscape evolution

Landscapes evolve in response to external forces, such as tectonics and climate, that influence surface processes of erosion and weathering. Internal feedbacks between erosion and weathering also play an integral role in regulating the landscapes response. Our understanding of these internal and external feedbacks is limited to a handful of field‐based studies, only a few of which have explicitly examined saprolite weathering. Here, we report rates of erosion and weathering in saprolite and soil to quantify how climate influences denudation, by focusing on an elevation transect in the western Sierra Nevada Mountains, California. We use an adapted mass balance approach and couple soil‐production rates from the cosmogenic radionuclide (CRN) ¹⁰Be with zirconium concentrations in rock, saprolite and soil. Our approach includes deep saprolite weathering and suggests that previous studies may have underestimated denudation rates across similar landscapes. Along the studied climate gradient, chemical weathering rates peak at middle elevations (1200–2000 m), averaging 112·3 ± 9·7 t km^–2 y^–1 compared to high and low elevation sites (46·8 ± 5·2 t km^?2 y^?1). Measured weathering rates follow similar patterns with climate as those of predicted silica fluxes, modeled using an Arrhenius temperature relationship and a linear relationship between flux and precipitation. Furthermore, chemical weathering and erosion are tightly correlated across our sites, and physical erosion rates increase with both saprolite weathering rates and intensity. Unexpectedly, saprolite and soil weathering intensities are inversely related, such that more weathered saprolites are overlain by weakly weathered soils. These data quantify exciting links between climate, weathering and erosion, and together suggest that climate controls chemical weathering via temperature and moisture control on chemical reaction rates. Our results also suggest that saprolite weathering reduces bedrock coherence, leading to faster rates of soil transport that, in turn, decrease material residence times in the soil column and limit soil weathering. Copyright © 2009 John Wiley & Sons, Ltd.     

Sensitivity analysis of hydraulic conductivity and Manning's n parameters lead to new method to scale effective hydraulic conductivity across model resolutions

Hydrological modelling is an important tool for research, policy, and management, but uncertainty remains about parameters transferability from field observations made at small scale to models at the catchment scale and larger. This uncertainty compels the need to develop parameter relationships that are translatable across scale. In this study, we compare the changes to modelled processes as resolution is coarsened from 100‐m to 1‐km in a topographically complex, 255‐km² Colorado River headwater catchment. We conducted a sensitivity analysis for hydraulic conductivity (K) and Manning's n parameters across four orders of magnitude. Results showed that K acts as a moderator between surface and subsurface contributions to streamflow, whereas n moderates the duration of high intensity, infiltration‐excess flow. The parametric sensitivity analysis informed development of a new method to scale effective hydraulic conductivity across modelling resolutions in order to compensate for the loss of topographic gradients as resolution is coarsened. A similar mathematical relationship between n and lateral resolution changes was not found, possibly because n is also sensitive to time discretization. This research provides an approach to translate hydraulic conductivity parameters from a calibrated coarse model to higher resolutions where the number of simulations are limited by computational demand.     

Contour scaling of a sandstone by salt weathering under simulated hot desert conditions

A laboratory study has been used to investigate relationships between salts and contour scaling—a weathering feature commonly observed on rock surfaces in salt-rich environments. Surface disaggregation and essentially surface-parallel cracks were produced in sandstone blocks using 10 per cent solutions of sodium sulphate and magnesium sulphate applied daily to single exposed surfaces for sixty days. A control block soaked once in saturated magnesium sulphate and subsequently wetted daily with distilled water showed extensive surface disaggregation, but no cracking. Both surface disaggregation and subsurface cracking were associated with relative concentrations of microcrystalline salt. A tentative model of contour scaling is proposed, which involves linking together potential cracks by salt-induced fracturing of intervening, crack-stopping grains. Further control blocks treated respectively with 10 per cent and saturated sodium chloride showed no evidence of subsurface cracking and only limited surface disaggregation of the ‘saturated’ block.     

A 3.5 Ga record of water-limited, acidic weathering conditions on Mars

The secondary mineral budget on Earth is dominated by clay minerals, Al-hydroxides, and Fe-oxides, which are formed under the moderate pH, high water-to-rock ratio conditions typical of Earth's near-surface environment. In contrast, geochemical analyses of rocks and soils from landed missions to Mars indicate that secondary mineralogy is dominated by Mg (± Fe, Ca)-sulfates and Fe-oxides. This discrepancy can be explained as resulting from differences in the chemical weathering environment of Earth and Mars. We suggest that chemical weathering processes on Mars are dominated by: (1) a low-pH, sulfuric acid-rich environment in which the stoichiometric dissolution of labile mineral phases such as olivine and apatite (± Fe–Ti oxides) is promoted; and (2) relatively low water-to-rock ratio, such that other silicate phases with slower dissolution rates (e.g., plagioclase, pyroxene) do not contribute substantially to the secondary mineral budget at the Martian surface. Under these conditions, Al-mobilization is limited, and the formation of significant Al-bearing secondary phases (e.g., clays, Al-hydroxides, Al-sulfates) is inhibited. The antiquity of rock samples analyzed in-situ on Mars suggest that water-limited acidic weathering conditions have more than likely been the defining characteristic of the Martian aqueous environment for billions of years.