共查询到20条相似文献,搜索用时 31 毫秒
1.
Paolo Paronuzzi 《Rock Mechanics and Rock Engineering》2009,42(5):783-813
This paper reports the field evidence and the kinematical study of the motion of two blocks (A and B) mobilised by a rockfall
in Lavone (Valtrompia, northern Italy) on 14th February 1987. The two sequences of impact marks left by the blocks on the
ground surface were measured and the lithostratigraphical features of the debris slope were surveyed. On the basis of the
field-collected input data, several computer simulations were carried out to calculate the coefficients of restitution (E) satisfying the trajectory conditions. The computed output values, obtained by running a specific automatic program for rockfall
modelling, show that rebound trajectories require high coefficients of restitution (0.8 ≤ E ≤ 0.9). Back-calculated impact velocities range from 9.2 to 19.8 m/s. Trajectory heights vary from 0 to 2.4 m above the slope
surface. Block trajectories differ considerably according to the circumstances of initial air projection, i.e. to the initial
rebound angle (α
r). The calculated values of α
r denote a considerable range (36°), emphasising the high variability and the random nature of this parameter. The described
case history shows that rockfall computer analyses can be an effective tool to describe the bouncing propagation of single
blocks, but care must be taken in choosing the restitution coefficient E and the geometrical parameters of initial air projections. 相似文献
2.
隧道仰坡落石冲击模型试验研究与机制探讨 总被引:1,自引:0,他引:1
以在建的成都-兰州(成兰)铁路某隧道出口仰坡为研究对象,研发了大型落石冲击边坡模型试验系统,该系统由模型试验台架、落石三维空间释放装置、高速摄影系统等组成,结构强度高并能满足试验过程的可视化需求。根据现场岩样实测物理力学参数,采用凡士林、硅油、水泥、细沙、重晶石粉、石膏以及滑石粉等原料,研制出现场千枚岩和砂岩的相似材料,并用于模拟边坡和落石。通过开展物理模型试验研究了近长方体落石初始滑移角度、形状、质量等3种因素对碰撞恢复系数这一落石运动轨迹模拟中关键参数的影响,同时在落石下落冲击的过程中,利用高速摄影仪和坐标卡尺记录落石完整的运动轨迹,后期通过视频处理软件分析落石与边坡碰撞前后的速度变化,根据公式计算出落石法向和切向的碰撞恢复系数。试验结果表明:随着初始滑移角度的增加,板状试件的法向、切向恢复系数分别呈减小和增大的趋势,且切向恢复系数变化更加明显;落石法向恢复系数随质量的增加呈明显减小的趋势,而切向恢复系数值变化不大;对于近长方体落石,立方体试件的法向和切向恢复系数大于厚板状试件,条形试件的两向恢复系数值受碰撞接触形态的影响,呈现两极化的趋势。最后,结合试验现象以及前人的研究成果对落石运动冲击机制进行了初步探讨。 相似文献
3.
D. M. Chate 《Natural Hazards》2011,56(1):81-91
A very high number concentration of aerosols in urban locations has a wide impact on health and ecosystem. The evolutions
of urban aerosol distributions at elapse-time 30 and 60 min are simulated at rainfall rates, 0.5 and 0.9 mm h−1 applying scavenging coefficients to initial aerosols number concentrations (before rain). We show how thunderstorm rain scavenges
number concentrations of urban aerosols in the ultrafine and fine modes. Elapsed-time evolutions of urban aerosols presented
in this work show washout of about 50–60 and 70–80% number concentrations of particles in the diameter range 0.02 μm ≤ D
p
≤ 0.1 μm after 30 and 60 min of thunderstorm rain when compared to initial number concentrations (before rain). Assuming
37 and 24% Sulfate and Organic Carbon particles in aerosol distributions in the urban environment and by applying scavenging
coefficients to these initial number concentrations, elapse-time evolutions after 30 and 60 min of thunderstorm rain are presented
in this work. The health impact is addressed in terms of depositions of particles within respiratory system by deposition
fractions as a function of particle size. For D
p
≤ 0.1 μm, 33 and 41% of initial number concentrations of Sulfate and Organic Carbon particles deposits within respiratory
system. Whereas elapsed-time evolutions show 60 and 80% cleansing of initial number concentrations of Sulfate and Organic
Carbon particles after 30 and 60 min of thunderstorm rain. 相似文献
4.
The compressibility at room temperature and the thermal expansion at room pressure of two disordered crystals (space group
C2/c) obtained by annealing a natural omphacite sample (space group P2/n) of composition close to Jd56Di44 and Jd55Di45, respectively, have been studied by single-crystal X-ray diffraction. Using a Birch–Murnaghan equation of state truncated
at the third order [BM3-EoS], we have obtained the following coefficients: V
0 = 421.04(7) Å3, K
T0 = 119(2) GPa, K′ = 5.7(6). A parameterized form of the BM3 EoS was used to determine the axial moduli of a, b and c. The anisotropy scheme is β
c
≤ β
a
≤ β
b
, with an anisotropy ratio 1.05:1.00:1.07. A fitting of the lattice variation as a function of temperature, allowing for linear
dependency of the thermal expansion coefficient on the temperature, yielded αV(1bar,303K) = 2.64(2) × 10−5 K−1 and an axial thermal expansion anisotropy of α
b
≫ α
a
> α
c
. Comparison of our results with available data on compressibility and thermal expansion shows that while a reasonable ideal
behaviour can be proposed for the compressibility of clinopyroxenes in the jadeite–diopside binary join [K
T0 as a function of Jd molar %: K
T0 = 106(1) GPa + 0.28(2) × Jd(mol%)], the available data have not sufficient quality to extract the behaviour of thermal expansion for the same binary join in
terms of composition. 相似文献
5.
Method for Quantification of Wear of Sheared Joint Walls Based on Surface Morphology 总被引:4,自引:2,他引:2
Roughness and wear evolution of three different joint wall surfaces were characterized using surface roughness and surface
wear parameters. Parameters were defined by considering the two components of morphology: waviness (“primary” roughness) and
surface roughness (“secondary” roughness). Two surface roughness parameters are proposed: joint interface (or single wall)
specific surface roughness coefficient SR
s
(0 ≤ SR
s
≤ 1) for quantifying the amount of “pure” roughness (or specific roughness), and degree of joint interface (or single wall)
relative surface roughness DR
r
(0 ≤ DR
r
≤ 0.5). Two further parameters are also proposed in order to quantify the wear of wall surface: joint interface (or single
wall) surface wear coefficient Λinterface, and the degree of joint interface (or single wall) surface wear D
w(interface). The three test specimens were: man-made granite joints with hammered surfaces, man-made mortar joints with corrugated surfaces,
and mortar joints prepared from natural rough and undulated schist joint replicas. Shearing under monotonic and cyclic shearing
was performed using a computer-controlled bidirectional and biaxial shear apparatus. Joint surface data were measured using
a noncontact laser sensor profilometer prior to and after each shear test. Calculation of specific surface roughness coefficient
SR
s
, and degree of surface wear D
w
, indicated that the hammered joint interface with predominant interlocking wears much more (>90%) than the corrugated (27%)
and the rough and undulated (23%) joint interfaces having localized interlocking points. The proposed method was also successfully
linked to the classical wear theory. 相似文献
6.
Analysis of Critical Excavation Depth for a Jointed Rock Slope Using a Face-to-Face Discrete Element Method 总被引:1,自引:0,他引:1
Summary The critical excavation depth of a jointed rock slope is an important problem in rock engineering. This paper studies the
critical excavation depth for two idealized jointed rock slopes by employing a face-to-face discrete element method (DEM).
The DEM is based on the discontinuity analysis which can consider anisotropic and discontinuous deformations due to joints
and their orientations. It uses four lump-points at each surface of rock blocks to describe their interactions. The relationship
between the critical excavation depth D
s
and the natural slope angle α, the joint inclination angle θ as well as the strength parameters of the joints c
r
,φ
r
is analyzed, and the critical excavation depth obtained with this DEM and the limit equilibrium method (LEM) is compared.
Furthermore, effects of joints on the failure modes are compared between DEM simulations and experimental observations. It
is found that the DEM predicts a lower critical excavation depth than the LEM if the joint structures in the rock mass are
not ignored. 相似文献
7.
The prediction of rockfall trajectories below a rock cliff is essential in susceptibility, hazard and risk maps, particularity
close to populated areas. The Monte da Lua hill area in Portugal, a tourist destination close to the historic city of Sintra
(UNESCO World Heritage), is a typical granite boulder chaos landscape where from time to time rockfalls occur, the last such
event having occurred on 29 January 2002. This area is therefore suitable to develop a rockfall study in order to provide
hazard and risk maps a basis for mitigation measures. A preliminary investigation of the area leads to the identification
of 188 potentially dangerous boulders. Detailed locations and geotechnical characteristics in terms of geometry, strength
and context were sampled for each boulder. Digital elevations at 1 × 1 m resolution, known rockfall trajectory and building
locations are provided in a GIS project for the study together with the spatial database of boulder characteristics. The modelling
approach was conducted in two steps: (1) discrimination of the boulders in terms of static and dynamic mobility behaviour
with multivariate analysis; (2) stochastic simulation of rockfall trajectories. The rockfall trajectory algorithm proposed
is straightforward and is only dependent on elevation data, initial location of boulders and a friction angle. Due to the
slope of the area, it assumes that rockfall is always of the rolling or sliding type. The friction angle was calibrated on
the basis of the rockfall travel distance recorded on 29 January 2002 and generates simulated “realistic” trajectories. A
smaller friction angle increases all simulated trajectories, leading to more “pessimistic” scenarios. The combined analysis
of trajectories and potential damage to buildings and discrimination in terms of static and dynamic behaviour provides a final
table in which all 188 sampled boulders are classified in one of the five risk grades. 相似文献
8.
This paper presents the results of experimental investigation on the effect of geotextile ties on uplift capacity of anchors
embedded in sand. Uplift capacity of anchor increases with increase in embedment depth to base diameter (H/D) ratio irrespective of type of anchor. With the introduction of tie to anchors, uplift capacity of anchors increases and
optimum number of layers of ties is found to be 2. A non linear power model has been developed to predict the uplift capacity
at any settlement (Q
R) of anchors with tie in terms of uplift capacity at any settlement (Q
URs) of anchor without tie, H/D ratio, number of layers of tie and displacement to base diameter ratio (Δ/D). The model is applicable for predicting Q
R having the values of Q
RS, H/D, N and Δ/D in the range of 0.257 ≤ Q
URs ≤ 1.420, 1.5 ≤ H/D ≤ 3.0, 1 ≤ N ≤ 4, 0.8 ≤ Δ/D ≤ 8. 相似文献
9.
Modeling fractured rocks with numerical methods requires some derived parameters, among which the fracture network connectivity
and the size of the representative elementary volume (REV) are both of crucial importance. Percolation and REV analyses were
made by the RepSim code. The program uses input parameters such as fractal dimension of the fracture midpoints (D
c), length exponent (E) and relative dip (α
r) data. For percolation analysis, the relative sizes of the largest percolation clusters have been calculated by stochastic
realizations of the simulated fracture networks with different parameter triplets. Furthermore, fracture networks can be classified
into three major types on the basis of their (E,D
c,α
r) parameters. For the REV calculations, the porosity of the generated fracture network was calculated. The derived REV size
of a fracture network depends essentially on input parameters and shows a decreasing tendency with increasing D and E and vice versa. The method mentioned above was tested on both metamorphic samples of the Pannonian Basin and Variscan granitoid
rocks of the Mórágy Complex. Percolation values predicted for the Mórágy granite are highly sensitive to alterations in the
input parameters. The amphibolite bodies displayed a modeled fracture network with 80 to 90% of all fractures being interconnected,
while the largest achievable percolation cluster size of gneiss is less than 10%. The REV size of the amphibolite is about
20 m as a result of connected fractures filling the whole body, while gneiss has lower porosity and higher REV (approximately
70 m). 相似文献
10.
Célia Dalou Kenneth T. Koga Nobumichi Shimizu Julien Boulon Jean-Luc Devidal 《Contributions to Mineralogy and Petrology》2012,163(4):591-609
We experimentally determined F and Cl partition coefficients together with that of 19 trace elements (including REE, U-Th,
HFSE and LILE) between basaltic melt and lherzolite minerals: olivine, orthopyroxene, clinopyroxene, plagioclase and garnet.
Under conditions from 8 to 25 kbars and from 1,265 to 1,430°C, compatibilities of F and Cl are globally ordered as D
Cpx/melt > D
Opx/melt > D
Grt/melt > D
Ol/melt > D
Plag/melt, and D
F
mineral/melt is larger than D
Clmineral/melt. Four other major results were brought to light. (1) Chlorine partition coefficients positively correlate with the jadeite
component in orthopyroxene, and increase of the CaTs component promotes Cl incorporation in clinopyroxene. (2) Variations
of fluorine partition coefficients correlate strongly with melt viscosity. (3) F and Cl partition coefficients correlate with
the Young’s modulus (E
0) of pyroxene octahedral sites (M sites) and with Raman vibrational modes of pyroxenes. This demonstrates a fundamental interaction
between the M site of pyroxenes and the incorporation of F and Cl. (4) We also determined the parameters of the lattice-strain
model applied to 3+ cation trace elements for the two M sites in orthopyroxene and clinopyroxene: D
0M1, D
0M2, r
0M1, r
0M2, E
0M1 and E
0M2. 相似文献
11.
We performed comparative study of phase relations in Fe1−x
Ni
x
(0.10 ≤ x ≤ 0.22 atomic fraction) and Fe0.90Ni0.10−x
C
x
(0.1 ≤ x ≤ 0.5 atomic fraction) systems at pressures to 45 GPa and temperatures to 2,600 K using laser-heated diamond anvil cell and
large-volume press (LVP) techniques. We show that laser heating of Fe,Ni alloys in DAC even to relatively low temperatures
can lead to the contamination of the sample with the carbon coming from diamond anvils, which results in the decomposition
of the alloy into iron- and nickel-rich phases. Based on the results of LVP experiments with Fe–Ni–C system (at pressures
up to 20 GPa and temperatures to 2,300 K) we demonstrate decrease of carbon solubility in Fe,Ni alloy with pressure. 相似文献
12.
The structural behavior of stuffed derivatives of quartz within the Li1−
x
Al1−
x
Si1+
x
O4 system (0 ≤ x ≤ 1) has been studied in the temperature range 20 to 873 K using high-resolution powder synchrotron X-ray diffraction (XRD).
Rietveld analysis reveals three distinct regimes whose boundaries are defined by an Al/Si order-disorder transition at x=∼0.3 and a β–α displacive transformation at x=∼0.65. Compounds that are topologically identical to β-quartz (0 ≤ x < ∼0.65) expand within the (0 0 1) plane and contract along c with increasing temperature; however, this thermal anisotropy is significantly higher for structures within the regime 0 ≤ x < ∼0.3 than for those with compositions ∼0.3 ≤ x < ∼0.65. We attribute this disparity to a tetrahedral tilting mechanism that occurs only in the ordered structures (0 ≤ x < ∼0.3). The phases with ∼0.65 ≤ x ≤ 1 adopt the α-quartz structure at room temperature, and they display positive thermal expansion along both a and c from 20 K to their α–β transition temperatures. This behavior arises mainly from a rotation of rigid Si(Al)-tetrahedra about
the <100> axes. Landau analysis provides quantitative evidence that the charge-coupled substitution of Li+Al for Si in quartz
dampens the α–β transition. With increasing Li+Al content, the low-temperature modifications exhibit a marked decrease in
spontaneous strain; this behavior reflects a weakening of the first-order character of the transition. In addition, we observe
a linear decrease in the α–β critical temperature from 846 K to near 0 K as the Li+Al content increases from x=0 to x=∼0.5.
Received: 26 June 2000 / Accepted: 1 December 2000 相似文献
13.
Global regression relations for conversion of surface wave and body wave magnitudes to moment magnitude 总被引:1,自引:0,他引:1
A homogenous earthquake catalog is a basic input for seismic hazard estimation, and other seismicity studies. The preparation
of a homogenous earthquake catalog for a seismic region needs regressed relations for conversion of different magnitudes types,
e.g. m
b
, M
s
, to the unified moment magnitude M
w. In case of small data sets for any seismic region, it is not possible to have reliable region specific conversion relations
and alternatively appropriate global regression relations for the required magnitude ranges and focal depths can be utilized.
In this study, we collected global events magnitude data from ISC, NEIC and GCMT databases for the period 1976 to May, 2007.
Data for mb magnitudes for 3,48,423 events for ISC and 2,38,525 events for NEIC, M
s
magnitudes for 81,974 events from ISC and 16,019 events for NEIC along with 27,229 M
w
events data from GCMT has been considered. An epicentral plot for M
w
events considered in this study is also shown. M
s
determinations by ISC and NEIC, have been verified to be equivalent. Orthogonal Standard Regression (OSR) relations have
been obtained between M
s
and M
w
for focal depths (h < 70 km) in the magnitude ranges 3.0 ≤ M
s
≤ 6.1 and 6.2 ≤ M
s
≤ 8.4, and for focal depths 70 km ≤ h ≤ 643 km in the magnitude range 3.3 ≤ M
s
≤ 7.2. Standard and Inverted Standard Regression plots are also shown along with OSR to ascertain the validation of orthogonal
regression for M
s
magnitudes. The OSR relations have smaller uncertainty compared to SR and ISR relations for M
s
conversions. ISR relations between m
b
and M
w
have been obtained for magnitude ranges 2.9 ≤ m
b
≤ 6.5, for ISC events and 3.8 ≤ m
b
≤ 6.5 for NEIC events. The regression relations derived in this study based on global data are useful empirical relations
to develop homogenous earthquake catalogs in the absence of regional regression relations, as the events catalog for most
seismic regions are heterogeneous in magnitude types. 相似文献
14.
Behavior of epidote at high pressure and high temperature: a powder diffraction study up to 10 GPa and 1,200 K 总被引:1,自引:0,他引:1
G. Diego Gatta Marco Merlini Yongjae Lee Stefano Poli 《Physics and Chemistry of Minerals》2011,38(6):419-428
The thermo-elastic behavior of a natural epidote [Ca1.925 Fe0.745Al2.265Ti0.004Si3.037O12(OH)] has been investigated up to 1,200 K (at 0.0001 GPa) and 10 GPa (at 298 K) by means of in situ synchrotron powder diffraction.
No phase transition has been observed within the temperature and pressure range investigated. P–V data fitted with a third-order Birch–Murnaghan equation of state (BM-EoS) give V
0 = 458.8(1)Å3, K
T0 = 111(3) GPa, and K′ = 7.6(7). The confidence ellipse from the variance–covariance matrix of K
T0 and K′ from the least-square procedure is strongly elongated with negative slope. The evolution of the “Eulerian finite strain”
vs “normalized stress” yields Fe(0) = 114(1) GPa as intercept values, and the slope of the regression line gives K′ = 7.0(4). The evolution of the lattice parameters with pressure is slightly anisotropic. The elastic parameters calculated
with a linearized BM-EoS are: a
0 = 8.8877(7) Å, K
T0(a) = 117(2) GPa, and K′(a) = 3.7(4) for the a-axis; b
0 = 5.6271(7) Å, K
T0(b) = 126(3) GPa, and K′(b) = 12(1) for the b-axis; and c
0 = 10.1527(7) Å, K
T0(c) = 90(1) GPa, and K’(c) = 8.1(4) for the c-axis [K
T0(a):K
T0(b):K
T0(c) = 1.30:1.40:1]. The β angle decreases with pressure, βP(°) = βP0 −0.0286(9)P +0.00134(9)P
2 (P in GPa). The evolution of axial and volume thermal expansion coefficient, α, with T was described by the polynomial function: α(T) = α0 + α1
T
−1/2. The refined parameters for epidote are: α0 = 5.1(2) × 10−5 K−1 and α1 = −5.1(6) × 10−4 K1/2 for the unit-cell volume, α0(a) = 1.21(7) × 10−5 K−1 and α1(a) = −1.2(2) × 10−4 K1/2 for the a-axis, α0(b) = 1.88(7) × 10−5 K−1 and α1(b) = −1.7(2) × 10−4 K1/2 for the b-axis, and α0(c) = 2.14(9) × 10−5 K−1 and α1(c) = −2.0(2) × 10−4 K1/2 for the c-axis. The thermo-elastic anisotropy can be described, at a first approximation, by α0(a): α0(b): α0(c) = 1 : 1.55 : 1.77. The β angle increases continuously with T, with βT(°) = βT0 + 2.5(1) × 10−4
T + 1.3(7) × 10−8
T
2. A comparison between the thermo-elastic parameters of epidote and clinozoisite is carried out. 相似文献
15.
Geochemical and environmental magnetic studies were carried out to identify the effect of iron oxyhydroxides on arsenic mobilization
in high arsenic aquifer system. Using high arsenic sediment samples from two boreholes, specifically drilled for this study,
chemical composition and magnetic properties including magnetic susceptibility, saturation remnant magnetization, and isothermal
remnant magnetization were measured. Results of correlation analysis of element contents show that arsenic and iron are closely
associated with each other (r
2 = 0.40, α = 0.05, n = 21). In contrast, the correlation of phosphorus with iron (r = 0.11, α = 0.05, n = 21) and arsenic (r
2 = 0.18, α = 0.05, n = 21) was poor, which might result from competitive adsorption of phosphorus and arsenic on the surface of Fe-oxyhydroxides.
The high correlation coefficients between arsenic contents and magnetic parameters suggest that the ferrimagnetic minerals
including maghemite and hematite are the dominant carrier of arsenic in aquifer sediments. The results of sequential extraction
experiments also revealed the association of arsenic with reducible iron oxides, such as maghemite and hematite in aquifer
sediments. Therefore, under reducing conditions, reductive dissolution and desorption of arsenic from Fe-oxyhydroxides into
the aqueous phase should be the dominant geochemical processes for its enrichment in groundwater at Datong.
An erratum to this article can be found at 相似文献
16.
G. Diego Gatta Marco Merlini Hanns-Peter Liermann André Rothkirch Mauro Gemmi Alessandro Pavese 《Physics and Chemistry of Minerals》2012,39(5):385-397
The thermoelastic behavior of a natural clintonite-1M [with composition: Ca1.01(Mg2.29Al0.59Fe0.12)Σ3.00(Si1.20Al2.80)Σ4.00O10(OH)2] has been investigated up to 10 GPa (at room temperature) and up to 960°C (at room pressure) by means of in situ synchrotron
single-crystal and powder diffraction, respectively. No evidence of phase transition has been observed within the pressure
and temperature range investigated. P–V data fitted with an isothermal third-order Birch–Murnaghan equation of state (BM-EoS) give V
0 = 457.1(2) ?3, K
T0 = 76(3)GPa, and K′ = 10.6(15). The evolution of the “Eulerian finite strain” versus “normalized stress” shows a linear positive trend. The
linear regression yields Fe(0) = 76(3) GPa as intercept value, and the slope of the regression line leads to a K′ value of 10.6(8). The evolution of the lattice parameters with pressure is significantly anisotropic [β(a) = 1/3K
T0(a) = 0.0023(1) GPa−1; β(b) = 1/3K
T0(b) = 0.0018(1) GPa−1; β(c) = 1/K
T0(c) = 0.0072(3) GPa−1]. The β-angle increases in response to the applied P, with: βP = β0 + 0.033(4)P (P in GPa). The structure refinements of clintonite up to 10.1 GPa show that, under hydrostatic pressure, the structure rearranges
by compressing mainly isotropically the inter-layer Ca-polyhedron. The bulk modulus of the Ca-polyhedron, described using
a second-order BM-EoS, is K
T0(Ca-polyhedron) = 41(2) GPa. The compression of the bond distances between calcium and the basal oxygens of the tetrahedral
sheet leads, in turn, to an increase in the ditrigonal distortion of the tetrahedral ring, with ∂α/∂P ≈ 0.1°/GPa within the P-range investigated. The Mg-rich octahedra appear to compress in response to the applied pressure, whereas the tetrahedron
appears to behave as a rigid unit. The evolution of axial and volume thermal expansion coefficient α with temperature was
described by the polynomial α(T) = α0 + α1
T
−1/2. The refined parameters for clintonite are as follows: α0 = 2.78(4) 10−5°C−1 and α1 = −4.4(6) 10−5°C1/2 for the unit-cell volume; α0(a) = 1.01(2) 10−5°C−1 and α1(a) = −1.8(3) 10−5°C1/2 for the a-axis; α0(b) = 1.07(1) 10−5°C−1 and α1(b) = −2.3(2) 10−5°C1/2 for the b-axis; and α0(c) = 0.64(2) 10−5°C−1 and α1(c) = −7.3(30) 10−6°C1/2for the c-axis. The β-angle appears to be almost constant within the given T-range. No structure collapsing in response to the T-induced dehydroxylation was found up to 960°C. The HP- and HT-data of this study show that in clintonite, the most and the less expandable directions do not correspond to the most and
the less compressible directions, respectively. A comparison between the thermoelastic parameters of clintonite and those
of true micas was carried out. 相似文献
17.
To perform a fuzzy risk assessment the simplest way is to calculate the fuzzy expected value and convert fuzzy risk into non-fuzzy
risk, i.e., a crisp value. In doing so, there is a transition from a fuzzy set to a crisp set. Therefore, the first step is
to define an α level value, followed by selecting the elements x with a subordinate degree A(x) ≥ α. The fuzzy expected values, Ea (x) \underline{E}_{\alpha } (x) and [`(E)]a (x) \overline{E}_{\alpha } (x) , of a possibility–probability distribution represent the fuzzy risk values being calculated. Therefore, we can obtain a conservative
risk value, a venture risk value and a maximum probability risk value. Under such an α level, three risk values can be calculated. As α adopts all values between the set [0, 1], it is possible to obtain a series of risk values. Therefore, the fuzzy risk may
either be a multi-valued risk or a set-valued risk. Calculation of the fuzzy expected value of a flood risk in the Jinhua
River basin has been performed based on the interior–outer-set model. The selection of an α value is dependent on the confidence in different groups of people, while the selection of a conservative risk value or a
venture risk value is dependent on the risk preference of these people. 相似文献
18.
The unit cell parameters, extracted from Rietveld analysis of neutron powder diffraction data collected between 4.2 K and
320 K, have been used to calculate the temperature evolution of the thermal expansion tensor for gypsum for 50 ≤ T ≤ 320 K. At 300 K the magnitudes of the principal axes are α
11
= 1.2(6) × 10−6 K−1, α
22
= 36.82(1) × 10−6 K−1 and α
33
= 25.1(5) × 10−6 K−1. The maximum axis, α
22
, is parallel to b, and using Institution of Radio Engineers (IRE) convention for the tensor orthonormal basis, the axes α
11
and α
33
have directions equal to (−0.979, 0, 0.201) and (0.201, 0, 0.979) respectively. The orientation and temperature dependent
behaviour of the thermal expansion tensor is related to the crystal structure in the I2/a setting.
Received 12 February 1998 / Revised, accepted 19 October 1998 相似文献
19.
Experimental determination of three-dimensional dispersivities in homogeneous porous medium 总被引:1,自引:1,他引:0
Laboratory tracer experiments were conducted to investigate longitudinal dispersivity (α
x
) as well as the transversal (α
y
) and vertical (α
z
) dispersivities in homogeneous 3–5 mm sandy aquifer. The experiments were carried out in a channel 12-m long, 1.35-m wide
and 0.60-m high which was built in the Hydraulics Laboratory of Civil Engineering Department in Dokuz Eylul University. NaCl
was used as a tracer and conductivity values were measured at 220 measurement points. Mass Transport 3 Dimensional (Zheng
and Wang in SERDP-99-1, US Army Engineer Research and Development Center, Vicksburg, MS, 1999; MT3DMS code) which is a three-dimensional solute transport simulation model incorporating finite differences solution option
was used to solve the three-dimensional advective–dispersive transport equation. The estimated dispersivity values were modified
until an acceptable compatibility between the observed and calculated concentrations at measurement points was reached. The
best match was obtained for α
x
= 12 cm, α
y
/α
x
= 0.2 and α
z
/α
x
= 0.05. These values are compatible with those encountered in the literature. 相似文献
20.
Characteristics of winter mass balance of Glacier No.1 at the headwaters of the Urumqi River,Tianshan Mountains 总被引:1,自引:1,他引:0
This study analyzes the response of glacier to climate change during the past 49 years in Urumqi River source region, the
Tianshan Mountains of China. The temporal and spatial variations of winter mass balance (bn-w) at different time scales were
analyzed to identify their response to climate change during 1988–2006 (The observation of winter mass balance observation
began in 1988) on the Glacier No.1 at the headwaters of the Urumqi River, Tianshan Mountains, China. The winter accumulation
shows a significantly decreasing trend. The results show that the cumulative values on Glacier No.1 is 2,202 mm water equivalent
during 1988–2006 and the mean values is 116 mm a−1. Furthermore, the trend analysis of the winter mass balance indicates a rapid decrease since 1990, and the mean mass balance
is only 79 mm a−1 during 1997–2006. Winter mass balance correlates well negatively with the total evaporation from September to April (r = −0.68, α = 0.01), and positively with the total precipitation from September to April (r = 0.74, α = 0.01). However, winter mass balance shows a weak correlation with mean minimum air temperature during September
to April (r = −0.35), and runoff on September (r = −0.13). 相似文献