Magnetostratigraphy of the Northern Tian Shan foreland,Taxi He section,China

The Tian Shan range formed in the late Cenozoic in response to the northward propagation of deformation related to the India–Eurasia continental collision. Precise timing of the Tian Shan uplift is required to understand possible mechanisms of continental lithosphere deformation and interactions between climate, tectonism and erosion. Here, we provide magnetostratigraphic age control on the northern Chinese Tian Shan foreland successions. A thorough rock magnetic analysis identifies haematite‐ and magnetite‐bearing alluvial fan deposits in the upper portion of the sampled strata as more reliable palaeomagnetic recorders than magnetite‐bearing fluvial and lacustrine deposits that are often maghaemitized in the lower part of the record. As a result, a robust correlation to the geomagnetic polarity time scale is obtained from 6 to 2 Ma while a tentative correlation is proposed from 6 to 16 Ma. Sediment accumulation rates increase from 155 to 260 m Myr^?1 at 3.9±0.3 Ma. This change coincides with a gradual lithologic transition from fluvial (sandstone‐dominated) to alluvial fan (conglomerate‐dominated) deposits that likely records an approaching erosional source related to tectonically increased subsidence rather than differential compaction. Clear evidence for growth strata starting at an estimated age of ～2 Ma provides a minimum age for folding. These results are compared with previous magneotstratigraphic studies from the same and other sections of the northern Tian Shan foreland basin fill, thus enabling a critical assessment of the reliability of magnetostratigraphic dating and the significance of sediment accumulation rate variations with respect to facies variations and growth strata. Our results in the Taxi He section provide a sequence of events that is consistent with enhanced tectonic forcing starting at ～4 Ma, although a climatic contribution must be considered given the close relationship of these ages with the Pliocene climate deterioration.     

Chronology and tectonic controls of Late Tertiary deposition in the southwestern Tian Shan foreland, NW China

Magnetostratigraphy from the Kashi foreland basin along the southern margin of the Tian Shan in Western China defines the chronology of both sedimentation and the structural evolution of this collisional mountain belt. Eleven magnetostratigraphic sections representing ～13 km of basin strata provide a two‐ and three‐dimensional record of continuous deposition since ～18 Ma. The distinctive Xiyu conglomerate makes up the uppermost strata in eight of 11 magnetostratigraphic sections within the foreland and forms a wedge that thins southward. The basal age of the conglomerate varies from 15.5±0.5 Ma at the northernmost part of the foreland, to 8.6±0.1 Ma in the central (medial) part of the foreland and to 1.9±0.2, ～1.04 and 0.7±0.1 Ma along the southern deformation front of the foreland basin. These data indicate the Xiyu conglomerate is highly time‐transgressive and has prograded south since just after the initial uplift of the Kashi Basin Thrust (KBT) at 18.9±3.3 Ma. Southward progradation occurred at an average rate of ～3 mm year^?1 between 15.5 and 2 Ma, before accelerating to ～10 mm year^?1. Abrupt changes in sediment‐accumulation rates are observed at 16.3 and 13.5 Ma in the northern part of the foreland and are interpreted to correspond to southward stepping deformation. A subtle decrease in the sedimentation rate above the Keketamu anticline is determined at ～4.0 Ma and was synchronous with an increase in sedimentation rate further south above the Atushi Anticline. Magnetostratigraphy also dates growth strata at <4.0, 1.4±0.1 and 1.4±0.2 Ma on the southern flanks the Keketamu, Atushi and Kashi anticlines, respectively. Together, sedimentation rate changes and growth strata indicate stepped migration of deformation into the Kashi foreland at least at 16.3, 13.5, 4.0 and 1.4 Ma. Progressive reconstruction of a seismically controlled cross‐section through the foreland produces total shortening of 13–21 km and migration of the deformation front at 2.1–3.4 mm year^?1 between 19 and 13.5 Ma, 1.4–1.6 mm year^?1 between 13.5 and 4.0 Ma and 10 mm year^?1 since 4.0 Ma. Migration of deformation into the foreland generally causes (1) uplift and reworking of basin‐capping conglomerate, (2) a local decrease of accommodation space above any active structure where uplift occurs, and hence a decrease in sedimentation rate and (3) an increase in accumulation on the margins of the structure due to increased subsidence and/or ponding of sediment behind the growing folds. Since 5–6 Ma, increased sediment‐accumulation (～0.8 mm year^?1) and gravel progradation (～10 mm year^?1) rates appear linked to higher deformation rates on the Keketamu, Atushi and Kashi anticlines and increased subsidence due to loading from both the Tian Shan and Pamir ranges, and possibly a change in climate causing accelerated erosion. Whereas the rapid (～10 mm year^?1) progradation of the Xiyu conglomerate after 4.0 Ma may be promoted by global climate change, its overall progradation since 15.5 Ma is due to the progressive encroachment of deformation into the foreland.     

Source to sink relations between the Tian Shan and Junggar Basin (northwest China) from Late Palaeozoic to Quaternary: evidence from detrital U‐Pb zircon geochronology

The tectonic evolution of the Tian Shan, as for most ranges in continental Asia is dominated by north‐south compression since the Cenozoic India‐Asia collision. However, precollision governing tectonic processes remain enigmatic. An excellent record is provided by thick Palaeozoic – Cenozoic lacustrine to fluvial depositional sequences that are well preserved in the southern margin of the Junggar Basin and exposed along a foreland basin associated to the Late Cenozoic rejuvenation of the Tian Shan ranges. U/Pb (LA‐ICP‐MS) dating of detrital zircons from 14 sandstone samples from a continuous series ranging in age from latest Palaeozoic to Quaternary is used to investigate changes in sediment provenance through time and to correlate them with major tectonic phases in the range. Samples were systematically collected along two nearby sections in the foreland basin. The results show that the detrital zircons are mostly magmatic in origin, with some minor input from metamorphic zircons. The U‐Pb detrital zircon ages range widely from 127 to 2856 Ma and can be divided into four main groups: 127–197 (sub‐peak at 159 Ma), 250–379 (sub‐peak at 318 Ma), 381–538 (sub‐peak at 406 Ma) and 543–2856 Ma (sub‐peak at 912 Ma). These groups indicate that the zircons were largely derived from the Tian Shan area to the south since a Late Carboniferous basin initiation. The provenance and basin‐range pattern evolution of the southern margin of Junggar Basin can be generally divided into four stages: (1) Late Carboniferous – Early Triassic basin evolution in a half‐graben or post‐orogenic extensional context; (2) From Middle Triassic to Upper Jurassic times, the southern Junggar became a passively subsiding basin until (3) being inverted during Lower Cretaceous – Palaeogene; (4) During the Neogene, a piedmont developed along the northern margin of the North Tian Shan block and Junggar Basin became a true foreland basin.     

Magnetostratigraphy of the Neogene Chaka basin and its implications for mountain building processes in the north‐eastern Tibetan Plateau

Magnetostratigraphy of sedimentary rock deposited in the Chaka basin (north‐eastern Tibetan Plateau) indicates a late Miocene onset of basin formation and subsequent development of the adjacent Qinghai Nan Shan. Sedimentation in the basin initiated at ～11 Ma. In the lower part of the basin fill, a coarsening‐upward sequence starting at ～9 Ma, as well as rapid sedimentation rates, and northward paleocurrents, are consistent with continued growth of the Ela Shan to the south. In the upper section, several lines of evidence suggest that thrust faulting and topographic development of the Qinghai Nan Shan began at ～6.1 Ma. Paleocurrent indicators, preserved in the basin in the proximal footwall of the Qinghai Nan Shan, show a change from northward to southward flow between 6.5 and 3.8 Ma. At the same location, sediment derived from the Qinghai Nan Shan appears at 6.1 Ma. Finally, the initiation of progressively shallowing dips observed in deformed basin strata and a change to pebbly, fluvial deposits at 6.1 Ma provide a minimum age for the onset of slip on the thrust fault that dips north‐east beneath the Qinghai Nan Shan. We interpret a decrease in sediment accumulation rates since ～6 Ma to indicate a reduction in Chaka basin accommodation space due to active faulting and folding along the Qinghai Nan Shan and incorporation of the basin into the wedge‐top depozone. Declination anomalies indicate the beginning of counter‐clockwise rotation since 6.1 Ma, which we associate with local deformation, not regional block rotation. The emergence of the Qinghai Nan Shan near the end of the Miocene Epoch partitioned the once contiguous Chaka‐Gonghe and Qinghai basin complex. In a regional framework, our study adds to a growing body of evidence that points to widespread initiation and/or reactivation of fault networks during the late Miocene across the north‐eastern Tibetan Plateau.     

Evolution of the late Cenozoic Chaco foreland basin, Southern Bolivia

Eastward Andean orogenic growth since the late Oligocene led to variable crustal loading, flexural subsidence and foreland basin sedimentation in the Chaco basin. To understand the interaction between Andean tectonics and contemporaneous foreland development, we analyse stratigraphic, sedimentologic and seismic data from the Subandean Belt and the Chaco Basin. The structural features provide a mechanism for transferring zones of deposition, subsidence and uplift. These can be reconstructed based on regional distribution of clastic sequences. Isopach maps, combined with sedimentary architecture analysis, establish systematic thickness variations, facies changes and depositional styles. The foreland basin consists of five stratigraphic successions controlled by Andean orogenic episodes and climate: (1) the foreland basin sequence commences between ～27 and 14 Ma with the regionally unconformable, thin, easterly sourced fluvial Petaca strata. It represents a significant time interval of low sediment accumulation in a forebulge‐backbulge depocentre. (2) The overlying ～14–7 Ma‐old Yecua Formation, deposited in marine, fluvial and lacustrine settings, represents increased subsidence rates from thrust‐belt loading outpacing sedimentation rates. It marks the onset of active deformation and the underfilled stage of the foreland basin in a distal foredeep. (3) The overlying ～7–6 Ma‐old, westerly sourced Tariquia Formation indicates a relatively high accommodation and sediment supply concomitant with the onset of deposition of Andean‐derived sediment in the medial‐foredeep depocentre on a distal fluvial megafan. Progradation of syntectonic, wedge‐shaped, westerly sourced, thickening‐ and coarsening‐upward clastics of the (4) ～6–2.1 Ma‐old Guandacay and (5) ～2.1 Ma‐to‐Recent Emborozú Formations represent the propagation of the deformation front in the present Subandean Zone, thereby indicating selective trapping of coarse sediments in the proximal foredeep and wedge‐top depocentres, respectively. Overall, the late Cenozoic stratigraphic intervals record the easterly propagation of the deformation front and foreland depocentre in response to loading and flexure by the growing Intra‐ and Subandean fold‐and‐thrust belt.     

Timing of Xunhua and Guide basin development and growth of the northeastern Tibetan Plateau,China

The Xunhua, Guide and Tongren intermontane basin system in the NE Tibetan Plateau, situated near the Xining basin to the N and the Linxia basin to the E, is bounded by thrust fault‐controlled ranges. These include to the N, the Riyue Shan, Laji Shan and Jishi Shan ranges, and to the S the northern West Qinling Shan (NWQ). An integrated study of the structural geology, sedimentology and provenance of the Cenozoic Xunhua and Guide basins provides a detailed record of the growth of the NE Tibetan Plateau since the early Eocene. The Xining Group (ca. 52–21 Ma) is interpreted as consisting of unified foreland basin deposits which were controlled by the bounding thrust belt of the NWQ. The Xunhua, Guide and Xining subbasins were interconnected prior to later uplift and damming by the Laji Shan and Jishi Shan ranges. Their sediment source, the NWQ, is constrained by strong unidirectional paleocurrent trends towards the N, a northward fining lithology, distinct and recognizable clast types and detrital zircon ages. Collectively, formation of this mountain–basin system indicates that the Tibetan Plateau expanded into the NWQ at a time roughly coinciding with Eocene to earliest Miocene continental collision between India and Eurasia. The Guide Group (ca. 21–1.8 Ma) is inferred to have been deposited in the separate Xunhua, Guide and Tongren broken foreland basins. Each basin was filled by locally sourced alluvial fans, braided streams and deltaic‐lacustrine systems. Structural, paleogeographic, paleocurrent and provenance data indicate that thrust faulting in the NWQ stepped northward to the Laji Shan from ca. 21 to 16 Ma. This northward shift was accompanied by E–W shortening related to nearly N–S‐striking thrust faulting in Jishi Shan after 11–13 Ma. A lower Pleistocene conglomerate (1.8–1.7 Ma) was deposited by a through‐flowing river system in the overfilled and connected Guide and Xunhua basins following the termination of thrust activity. All of the basin–mountain zones developed along the Tibetan Plateau's NE margin since Indian–Tibetan continental collision may have been driven by collision‐induced basal drag of old slab remnants in the manner of N‐dipping and flat‐slab subduction, and their subsequent sinking into the deep mantle.     

Compressional salt tectonics and synkinematic strata of the western Kuqa foreland basin,southern Tian Shan,China

The synkinematic strata of the Kuqa foreland basin record a rich history of Cenozoic reactivation of the Palaeozoic Tian Shan mountain belt. Here, we present new constraints on the history of deformation in the southern Tian Shan, based on an analysis of interactions between tectonics and sedimentation in the western Kuqa basin. We constructed six balanced cross‐sections of the basin, integrating surface geology, well data and a grid of seismic reflection profiles. These profiles show that the Qiulitage fold belt on the southern edge of the Kuqa basin developed by thin‐skinned compression salt tectonics. The structural styles have been influenced by two major factors: the nature of early‐formed diapirs and the basinward depositional limit of the Kumugeliemu salt. Several early diapirs developed in the western Kuqa basin, soon after salt deposition, which acted to localize the subsequent shortening. Where diapirs had low relief and a thick overburden they tended to tighten into salt domes 3000–7000 m in height. Conversely, where the original diapirs had higher relief and a thinner overburden they tended to evolve into salt nappes, with the northern flanks of the diapirs thrusting over their southern flanks. Salt was expelled forward, up dip along the mother salt layer, tended to accumulate at the distal pinch‐out of Kumugeliemu salt located at the Qiulitage fold belt. Furthermore, the synkinematic strata (6–8 km thick) of the Kuqa basin indicate that during the Cenozoic reactivation of the Tian Shan, shortening of the western Kuqa basin was mainly in the hinterland until the early Miocene. Then, compression spread simultaneously southwards to the Dawanqi anticline, the Qiulitage fold belt and the southernmost blind detachment fold at the end of Miocene. The western Kuqa basin has a shortening of ca. 23 km. We consider that ca. 9 km was consumed from the end of the Miocene (5.2/5.8 Ma) to the early Pleistocene (2.58 Ma) and another ca. 14 km have been absorbed since then. Thus, we obtain a ca. 3.4/2.8 mm year^?1 average shortening from 5.2/5.8 to 2.58 Ma, followed by a 60–90% increase in average shortening rate to ca. 5.4 mm year^?1 since 2.58 Ma. This suggests that the reactivation of the modern Tian Shan has been accelerating up to the present day.     

Distinguishing fault reactivation from flexural deformation in the distal stratigraphy of the Peripheral Blountian Foreland Basin, southern Appalachians, USA

Reactivation of intraplate structures and weak zones within the foreland lithosphere disrupt the modelled geometry and pattern of migration of the flexural wave in foreland basins. In the southern Appalachians (USA), the Middle Ordovician unconformity, irregular Middle Ordovician distal foreland deposition and backstepping of Middle–lower Upper Ordovician carbonate strata have been related to migration of the flexural wave. However, integration of stratigraphy, tectonic subsidence history and composition of palinspastically restored distal foreland strata, using a map of subsurface basement structures as reference, allows us to distinguish an early event of inversion from two events of flexural migration. Sections restoring at very short distances outside the boundaries of a former basement graben have the youngest passive‐margin strata preserved beneath Middle Ordovician (～466 Ma) peritidal to deep lagoonal carbonates with gravel‐size chert clasts. In contrast, sections restoring inside the graben record >470 m of truncation of pre‐Middle Ordovician passive‐margin strata, late onset of deposition (～456 Ma), and subaerial features in carbonate and siliciclastic strata. The lacuna geometry and early patterns of distal foreland uplift and carbonate deposition indicate that inversion of a basement graben in response to Middle Ordovician convergence, rather than a migrating or semi‐fixed forebulge, was the primary control on the early evolution of the distal foreland. Drowning of the carbonate platform in more proximal settings, northeastward onset of deposition on upthrown blocks, and thick accumulation of carbonates in downthrown blocks record northwestward and northeastward flexural wave migration at the Middle–Late Ordovician boundary. In early Late Ordovician, the overall shoaling of carbonate and siliciclastic depocentres and the rise of tectonic subsidence curves indicate hinterlandward migration of flexural uplift. Both events of flexural migration were accompanied by influx of volcanic ash and synorogenic sediments.     

Signatures of tectonic‐climatic interaction during the Late Cenozoic orogenesis along the northern Chinese Tian Shan

The Chinese Tian Shan is one of the most actively growing orogenic ranges in Central Asia. The Late Miocene‐Quaternary landscape evolution of northern Tian Shan has been significantly driven by the interaction between tectonic deformations and climate change, further modulated by the erosion of the upstream bedrocks and deposition into the downstream basins. In this study, only the accessible Kuitun River drainage basin in northern Tian Shan was considered, and detrital zircon geochronology and heavy minerals were analyzed to investigate the signature of the driving forces for Miocene sedimentation in northern Tian Shan. This study first confirmed a previously recognized tectonic uplift at ca. 7.0 Ma and further revealed that the basin sediments were mainly derived from the present glacier‐covered ridge‐crest regions during 3.3–2.5 Ma. It is suggested Late‐Pliocene to Early Pleistocene sedimentation was likely a response to the onset of the northern hemispheric glaciation. Although complicated, this study highlights that the tectonic‐climatic interaction during the Late Cenozoic orogenesis can be discriminated in the northern Chinese Tian Shan.     

Tectonics of the Xining Basin in NW China and its implications for the evolution of the NE Qinghai‐Tibetan Plateau

The continuous Cenozoic strata in the Xining Basin record the growth and evolution of the northeastern Qinghai–Tibetan Plateau. Here, the mechanisms and evolution of the Xining Basin during the Cenozoic were investigated by studying the sedimentary facies of 22 Cenozoic sections across the basin and detrital zircon U‐Pb ages of three Cenozoic sections located in the eastern, central and western basin, respectively. In the Eocene (ca. 50–44 Ma), the India‐Eurasia Collision affected the northeastern Qinghai–Tibetan Plateau. The Central Qilian Block rotated clockwise by ca. 24° to form the Xining Basin. The Triassic flysch sediments surrounding the basin were the primary sources of sediment. Between ca. 44–40 Ma, the basin enlarged and deepened, and sedimentation was dominated by saline lake sediments. Between ca. 40–25.5 Ma, the Xining Basin began to shrink and dry, resulting in the deposition of saline pan and saline mudflat sediments in the basin. After ca. 20 Ma, the Laji Shan to the south of the Xining Basin was uplifted due to the northward compression of the Guide Basin to the south. Clasts that eroded from this range dominated the sediments as the basin evolved from a lacustrine environment into a fluvial system. The Xining Basin was an extensional basin in the Early Cenozoic, but changed into a compressive one during the Late Cenozoic, it was not a foreland basin either to the Kunlun Shan or to the western Qinling Shan in the whole Cenozoic. The formation and deformation of the Xining Basin are the direct responses of the India‐Eurasia Collision and the growth of the Qinghai‐Tibetan Plateau.     

Late Eocene–Pliocene basin evolution in the Eastern Cordillera of northwestern Argentina (25°–26°S): regional implications for Andean orogenic wedge development

Important aspects of the Andean foreland basin in Argentina remain poorly constrained, such as the effect of deformation on deposition, in which foreland basin depozones Cenozoic sedimentary units were deposited, how sediment sources and drainages evolved in response to tectonics, and the thickness of sediment accumulation. Zircon U‐Pb geochronological data from Eocene–Pliocene sedimentary strata in the Eastern Cordillera of northwestern Argentina (Pucará–Angastaco and La Viña areas) provide an Eocene (ca. 38 Ma) maximum depositional age for the Quebrada de los Colorados Formation. Sedimentological and provenance data reveal a basin history that is best explained within the context of an evolving foreland basin system affected by inherited palaeotopography. The Quebrada de los Colorados Formation represents deposition in the distal to proximal foredeep depozone. Development of an angular unconformity at ca. 14 Ma and the coarse‐grained, proximal character of the overlying Angastaco Formation (lower to upper Miocene) suggest deposition in a wedge‐top depozone. Axial drainage during deposition of the Palo Pintado Formation (upper Miocene) suggests a fluvial‐lacustrine intramontane setting. By ca. 4 Ma, during deposition of the San Felipe Formation, the Angastaco area had become structurally isolated by the uplift of the Sierra de los Colorados Range to the east. Overall, the Eastern Cordillera sedimentary record is consistent with a continuous foreland basin system that migrated through the region from late Eocene through middle Miocene time. By middle Miocene time, the region lay within the topographically complex wedge‐top depozone, influenced by thick‐skinned deformation and re‐activation of Cretaceous rift structures. The association of the Eocene Quebrada del los Colorados Formation with a foredeep depozone implies that more distal foreland deposits should be represented by pre‐Eocene strata (Santa Barbara Subgroup) within the region.     

Tectonic setting of Cretaceous basins on the NE Tibetan Plateau: insights from the Jungong basin

Quantifying the Cenozoic growth of high topography in the Indo‐Asian collision zone remains challenging, due in part to significant shortening that occurred within Eurasia before collision. A growing body of evidence suggests that regions far removed from the suture zone experienced deformation before and during the early phases of Himalayan orogenesis. In the present‐day north‐eastern Tibetan Plateau, widespread deposits of Cretaceous sediment attest to significant basin formation; however, the tectonic setting of these basins remains enigmatic. We present a study of a regionally extensive network of sedimentary basins that are spatially associated with a system of SE‐vergent thrust faults and are now exposed in the high ranges of the north‐eastern corner of the Tibetan Plateau. We focus on a particularly well‐exposed basin, located ～20 km north of the Kunlun fault in the Anyemaqen Shan. The basin is filled by ～900 m of alluvial sediments that become finer‐grained away from the basin‐bounding fault. Additionally, beds in the proximal footwall of the basin‐bounding fault exhibit progressive, up‐section shallowing and several intraformational unconformities which can be traced into correlative conformities in the distal part of the basin. The observations show sediment accumulated in the basin during fault motion. Regional constraints on the timing of sediment deposition are provided by both fossil assemblages from the Early Cretaceous, and by K–Ar dating of volcanic rocks that floor and cross‐cut sedimentary fill. We argue that during the Cretaceous, the interior NE Tibetan Plateau experienced NW–SE contractional deformation similar to that documented throughout the Qinling–Dabie orogen to the east. The Songpan‐Ganzi terrane apparently marked the southern limit of this deformation, such that it may have been a relatively rigid block in the Tibetan lithosphere, separating regions experiencing deformation north of the convergent Tethyan margin from regions deforming inboard of the east Asian margin.     

Magnetochronology of synorogenic Miocene foreland sediments in the Fars arc of the Zagros Folded Belt (SW Iran)

The timing of deformation in the northern Zagros Folded Belt is poorly constrained because of the lack of an accurate absolute chronology of the syntectonic sedimentary sequences. The foreland basin infill in the northern part of the Fars arc is composed of supratidal sabkha deposits (Razak Fm), medium‐grained deltaic deposits (Agha Jari Fm) and coarse conglomerates of nearshore fan delta deposits at the base (Bakhtyari Fm, Bk1) and continental alluvial deposits at the top of the section (Bakhtyari Fm, Bk2). A magnetostratigraphic study was carried out in a composite section spanning about 1300 m on the northern flank of the Chahar–Makan syncline. Magnetostratigraphic correlation of the Razak Fm with chron C6n yields an age of 19.7 Ma at the base of the composite section. The transition to Agha Jari Fm is correlated with chron C5Cn, yielding an age of 16.6 Ma. The transition to the conglomerates of the Bakhtyari Fm (Bk1) correlates with the chron C5AD at approximately 14.8 Ma, which is considerably older than previously thought. The base of the Bakhtyari Fm growth strata, and thus the beginning of the deformation in northern Fars, is dated at 14–15 Ma. The topmost preserved Bakhtyari Fm (Bk1) is folded and unconformably overlain by Bakhtyari Fm (Bk2) conglomerates. This indicates that tectonic deformation in northern Zagros was already underway in the Middle Miocene.     

Geodynamic context for the deposition of coarse‐grained deep‐water axial channel systems in the Patagonian Andes

We present field and seismic evidence for the existence of Coniacian–Campanian syntectonic angular unconformities within basal foreland basin sequences of the Austral or Magallanes Basin, with implications for the understanding of deformation and sedimentation in the southern Patagonian Andes. The studied sequences belong to the mainly turbiditic Upper Cretaceous Cerro Toro Formation that includes a world‐class example of conglomerate‐filled deep‐water channel bodies deposited in an axial foredeep depocentre. We present multiple evidence of syntectonic deposition showing that the present internal domain of the fold‐thrust belt was an active Coniacian–Campanian wedge‐top depozone where deposition of turbidites and conglomerate channels of Cerro Toro took place. Cretaceous synsedimentary deformation was dominated by positive inversion of Jurassic extensional structures that produced elongated axial submarine trenches separated by structural highs controlling the development and distribution of axial channels. The position of Coniacian‐Campanian unconformities indicates a ca. 50–80 km advance of the orogenic front throughout the internal domain, implying that Late Cretaceous deformation was more significant in terms of widening the orogenic wedge than all subsequent Andean deformation stages. This south Patagonian orogenic event can be related to compressional stresses generated by the combination of both the collision of the western margin of Rocas Verdes Basin during its closure, and Atlantic ridge push forces due to its accelerated opening, during a global‐scale plate reorganization event.     

Tectonic controls on the deposits of a foreland basin: an example from the Eocene Corbières–Minervois basin, France

ABSTRACT During the Eocene in the Corbières–Minervois foreland basin, southern France, there was a transition from marine carbonate to fluvial–lacustrine sedimentation. This evolution took place in six depositional sequences, the first controlled by a eustatic rise or flexural downwarping, then following under compressive tectonic conditions. The second to the fourth sequences show marine to marshy, mainly carbonate sediments with a transgressive–regressive evolution, while the last two comprise terrigenous and carbonate continental sediments. The tectonic evolution is marked by blind fault-propagation folds which deformed the basin during the Ilerdian–Cuisian. A paroxysmal compressive tectonic phase occurred at the Bartonian when the ancient blind thrusts started to emerge. A model for the evolution of the basin is presented, involving the northward propagation of structural culminations, which focused shallow water or emergent conditions, and structural lows in which deeper water sedimentation took place. The diachronous migration of these structural zones can be constrained from the high biostratigraphic resolution of the foreland basin fill.     

新疆天山夷平面形态特征浅析

天山广泛发育着三级夷平面,削平了古、中生代多期构造形态及褶皱岩层。天山夷平面是在古华力西褶皱山脉的基础上,在地壳相对稳定的条件下,经中生代,早第三纪的剥蚀夷平,于晚第三纪末至第四纪初新构造运动作用下,被抬升到不同高度,而后受第四纪以来新构造运动的不断作用及天山独特气候条件的影响,使夷平面在垂直方向或水平方向都存在着明显差异,表面发生了一系列变形。     

Evolution of the Longmen Shan Foreland Basin (Western Sichuan, China) during the Late Triassic Indosinian Orogeny

The Longmen Shan Foreland Basin developed as a flexural foredeep during the Late Triassic Indosinian orogeny, spanning the time period c. 227–206 Ma. The basin fill can be divided into three tectonostratigraphic units overlying a basal megasequence boundary, and is superimposed on the Palaeozoic–Middle Triassic (Anisian) carbonate‐dominated margin of the South China Block. The remains of the load system responsible for flexure of the South China foreland can be seen in the Songpan‐Ganzi Fold Belt and Longmen Shan Thrust Belt. Early in its history the Longmen Shan Foreland Basin extended well beyond its present northwestern boundary along the trace of the Pengguan Fault, to at least the palinspastically restored position of the Beichuan Fault. The basal boundary of the foreland basin megasequence is a good candidate for a flexural forebulge unconformity, passing from conformity close to the present trace of the Beichuan Fault to a karstified surface towards the southeast. The overlying tectonostratigraphic unit shows establishment and drowning of a distal margin carbonate ramp and sponge build‐up, deepening into offshore marine muds, followed by progradation of marginal marine siliciclastics, collectively reminiscent of the Alpine underfilled trinity of Sinclair (1997) . Tectonostratigraphic unit 2 is marked by the severing of the basin's oceanic connection, a major lake flooding and the gradual establishment of major deltaic‐paralic systems that prograded from the eroding Longmen Shan orogen. The third tectonostratigraphic unit is typified by coarse, proximal conglomerates, commonly truncating underlying rocks, which fine upwards into lacustrine shales. The foreland basin stratigraphy has been further investigated using a simple analytical model based on the deflection by supracrustal loads of a continuous elastic plate overlying a fluid substratum. Load configurations have been partly informed by field geology and constrained by maximum elevations and topographic profiles of present‐day mountain belts. The closest match between model predictions and stratigraphic observations is for a relatively rigid plate with flexural rigidity on the order of 5 × 10²³ to 5 × 10²⁴ N m (equivalent elastic thickness of c. 43–54 km). The orogenic load system initially (c. 227–220 Ma) advanced rapidly (>15 mm yr^?1) towards the South China Block in the Carnian, associated with the rapid closure of the Songpan‐Ganzi ocean, before slowing to < 5 mm yr^?1 during the sedimentation of the upper two tectonostratigraphic units (c. 220–206 Ma).     

Neotectonic basin and landscape evolution in the Eastern Cordillera of NW Argentina,Humahuaca Basin (~24°S)

The intermontane Quebrada de Humahuaca Basin (Humahuaca Basin) in the Eastern Cordillera of the southern Central Andes of NW Argentina (23°–24°S) records the evolution of a formerly contiguous foreland‐basin setting to an intermontane depositional environment during the late stages of Cenozoic Andean mountain building. This basin has been and continues to be subject to shortening and surface uplift, which has resulted in the establishment of an orographic barrier for easterly sourced moisture‐bearing winds along its eastern margin, followed by leeward aridification. We present new U–Pb zircon ages and palaeocurrent reconstructions suggesting that from at least 6 Ma until 4.2 Ma, the Humahuaca Basin was an integral part of a largely contiguous depositional system that became progressively decoupled from the foreland as deformation migrated eastward. The Humahuaca Basin experienced multiple cycles of severed hydrological conditions and subsequent re‐captured drainage, fluvial connectivity with the foreland and sediment evacuation. Depositional and structural relationships among faults, regional unconformities and deformed landforms reveal a general pattern of intrabasin deformation that appears to be associated with different cycles of alluviation and basin excavation in which deformation is focused on basin‐internal structures during or subsequent to phases of large‐scale sediment removal.     

Insights in the exhumation history of the NW Zagros from bedrock and detrital apatite fission‐track analysis: evidence for a long‐lived orogeny

We present the first fission‐track (FT) thermochronology results for the NW Zagros Belt (SW Iran) in order to identify denudation episodes that occurred during the protracted Zagros orogeny. Samples were collected from the two main detrital successions of the NW Zagros foreland basin: the Palaeocene–early Eocene Amiran–Kashkan succession and the Miocene Agha Jari and Bakhtyari Formations. In situ bedrock samples were furthermore collected in the Sanandaj‐Sirjan Zone. Only apatite fission‐track (AFT) data have been successfully obtained, including 26 ages and 11 track‐length distributions. Five families of AFT ages have been documented from analyses of in situ bedrock and detrital samples: pre‐middle Jurassic at ～171 and ～225 Ma, early–late Cretaceous at ～91 Ma, Maastrichtian at ～66 Ma, middle–late Eocene at ～38 Ma and Oligocene–early Miocene at ～22 Ma. The most widespread middle–late Eocene cooling phase, around ～38 Ma, is documented by a predominant grain‐age population in Agha Jari sediments and by cooling ages of a granitic boulder sample. AFT ages document at least three cooling/denudation periods linked to major geodynamic events related to the Zagros orogeny, during the late Cretaceous oceanic obduction event, during the middle and late Eocene and during the early Miocene. Both late Cretaceous and early Miocene orogenic processes produced bending of the Arabian plate and concomitant foreland deposition. Between the two major flexural foreland episodes, the middle–late Eocene phase mostly produced a long‐lasting slow‐ or nondepositional episode in the inner part of the foreland basin, whereas deposition and tectonics migrated to the NE along the Sanandaj‐Sirjan domain and its Gaveh Rud fore‐arc basin. As evidenced in this study, the Zagros orogeny was long‐lived and multi‐episodic, implying that the timing of accretion of the different tectonic domains that form the Zagros Mountains requires cautious interpretation.     

Detrital thermochronologic record of burial heating and sediment recycling in the Magallanes foreland basin,Patagonian Andes

The Patagonian Magallanes retroarc foreland basin affords an excellent case study of sediment burial recycling within a thrust belt setting. We report combined detrital zircon U–Pb geochronology and (U–Th)/He thermochronology data and thermal modelling results that confirm delivery of both rapidly cooled, first‐cycle volcanogenic sediments from the Patagonian magmatic arc and recycled sediment from deeply buried and exhumed Cretaceous foredeep strata to the Cenozoic depocentre of the Patagonian Magallanes basin. We have quantified the magnitude of Eocene heating with thermal models that simultaneously forward model detrital zircon (U–Th)/He dates for best‐fit thermal histories. Our results indicate that 54–45 Ma burial of the Maastrichtian Dorotea Formation produced 164–180 °C conditions and heating to within the zircon He partial retention zone. Such deep burial is unusual for Andean foreland basins and may have resulted from combined effects of high basal heat flow and high sediment accumulation within a rapidly subsiding foredeep that was floored by basement weakened by previous Late Jurassic rifting. In this interpretation, Cenozoic thrust‐related deformation deeply eroded the Dorotea Formation from ca. 5 km burial depths and may be responsible for the development of a basin‐wide Palaeogene unconformity. Results from the Cenozoic Río Turbio and Santa Cruz formations confirm that they contain both Cenozoic first‐cycle zircon from the Patagonian magmatic arc and highly outgassed zircon recycled from older basin strata that experienced burial histories similar to those of the Dorotea Formation.