Cretaceous episodic growth of the Japanese Islands

Abstract The Japanese Islands formed rapidly in situ along the eastern Asian continental margin in the Cretaceous due to both tectonic and magmatic processes. In the Early Cretaceous, huge oceanic plateaus created by the mid-Panthalassa super plume accreted with the continental margin. This tectonic interaction of oceanic plateau with continental crust is one of the significant tectonic processes responsible for continental growth in subduction zones. In the Japanese Islands, Late Cretaceous-Early Paleogene continental growth is much more episodic and drastic. At this time the continental margin uplifted regionally, and intra-continent collision tectonics took place in the northern part of the Asian continent. The uplifting event appears to have been caused by the subduction of very young oceanic crust (i.e. the Izanagi-Kula Plate) along the continental margin. Magmatism was also very active, and melting of the young oceanic slab appears to have resulted in ubiquitous plutons in the continental margin. Regional uplift of the continental margin and intra-continent collision tectonics promoted erosion of the uplifted area, and a large amount of terrigenous sediment was abruptly supplied to the trench. As a result of the rapid supply of terrigenous detritus, the accretionary complexes (the Hidaka Belt in Hokkaido and the Shimanto Belt in Southwest Japan) grew rapidly in the subduction zone. The rapid growth of the accretionary complexes and the subduction of very young, buoyant oceanic crust caused the extrusion of a high-P/T metamorphic wedge from the deep levels of the subduction zone. Episodic growth of the Late Cretaceous Japanese Islands suggests that subduction of very young oceanic crust and/or ridge subduction are very significant for the formation of new continental crust in subduction zones.     

Rapid evolution of the Eocene accretionary complex (Hyuga Group) of the Shimanto terrane in southeastern Kyushu, southwestern Japan

Abstract   Detailed geologic examination of the Eocene accretionary complex (Hyuga Group) of the Shimanto terrane in southeastern Kyushu revealed that the oceanic plate was composed of Paleocene to Lower Eocene mudstone and siliceous mudstone, lower Middle Eocene red mudstone, and mid-Middle Eocene trench-fill turbidite with siltstone breccia, successively overlying the pre-Eocene oceanic plate. This oceanic plate sequence was overlain by Upper Eocene siltstone. Deposition of the lower Middle Eocene red mudstone was accompanied by basalt flows and it is interbedded with continental felsic tuff, which indicates that the basalt and red mudstone were deposited near the trench just before accretion. The Hyuga Group has very similar geological structure to that of the chert–clastic complexes found in the Jurassic accretionary complexes in Japan: that is, a decollement fault formed in the middle of an oceanic plate sequence, and an imbricate structure formed only in the upper part of the sequence. Thus, it appears that the Hyuga Group was formed by the same accretionary process as the Jurassic accretionary complexes. No accretion occurred before the Middle Eocene, and the rapid accretion of the Hyuga Group was commenced by the supply of coarse terrigenous sediments in the mid-Middle Eocene, when the direction of movement of the Pacific Plate changed. The pre-Eocene oceanic basement and lower Middle Eocene volcanic activity suggest that the oceanic plate partly preserved in the Hyuga Group was very similar to the northern part of the present West Philippine Sea Plate.     

Tectonic accretion of a subducted intraoceanic remnant arc in Cretaceous Hokkaido, Japan, and implications for evolution of the Pacific northwest

Abstract   An accretionary complex, which contains fragments of a remnant island arc, was newly recognized in the Cretaceous accretionary terranes in Hokkaido, Japan. It consists of volcanics, volcanic conglomerate, intermediate to ultramafic intrusive rocks with island-arc affinity including boninitic rocks, accompanied by chert and deformed terrigenous turbidites. Compared with the results of modern oceanic surveys, the preserved sequence from island-arc volcanics to chert, via reworked volcanics, is indicative of intraoceanic remnant arc, because the sequence suggests an inactive arc isolated within a pelagic environment before its accretion. The age of a subducting oceanic crust can be discontinuous before and after a remnant-arc subduction, resulting in abrupt changes in accretion style and metamorphism, as seen in Cretaceous Hokkaido. Subduction of such an intraoceanic remnant arc suggests that the subducted oceanic plate in the Cretaceous was not an extensive oceanic plate like the Izanagi and/or Kula Plates as previously believed by many authors, but a marginal basin plate having an arc–back-arc system like the present-day Philippine Sea Plate.     

Oceanic plate subduction history in the western Pacific Ocean: Constraint from late Mesozoic evolution of the Tan-Lu Fault Zone

The NE- to NNE-striking Tan-Lu Fault Zone (TLFZ) is the largest fault zone in East China, and a typical representative for the circum-Pacific tectonics. Its late Mesozoic evolution resulted from subduction of the Paleo-Pacific Plate, and can be used for indication to the subduction history. The TLFZ reactivated at the end of Middle Jurassic since its origination in Middle Triassic. This phase of sinistral motion can only be recognized along the eastern edge of the Dabie-Sulu orogenis, and indicates initiation of the Paleo-Pacific (Izanagi) Plate subduction beneath the East China continent. After the Late Jurassic standstill, the fault zone experienced intense sinistral faulting again at the beginning of Early Cretaceous under N-S compression that resulted from the NNW-ward, low-angle, high-speed subduction of the Izanagi Plate. It turned into normal faulting in the rest of Early Cretaceous, which was simultaneous with the peak destruction of the North China Craton caused by backarc extension that resulted from rollback of the subducting Izanagi Plate. The TLFZ was subjected to sinistral, transpressive displacement again at the end of Early Cretaceous. This shortening event led to termination of the North China Craton destruction. The fault zone suffered local normal faulting in Late Cretaceous due to the far-field, weak backarc extension. The late Mesozoic evolution of the TLFZ show repeated alternation between the transpressive strike-slip motion and normal faulting. Each of the sinistral faulting event took place in a relatively short period whereas every normal faulting event lasted in a longer period, which are related to the subduction way and history of the Paleo-Pacific Plates.     

Thermal histories of Cretaceous basins in Korea: Implications for response of the East Asian continental margin to subduction of the Paleo‐Pacific Plate

Thermal histories of Cretaceous sedimentary basins in the Korean peninsula have been assessed to understand the response of the East Asian continental margin to subduction of the Paleo‐Pacific (Izanagi) Plate. The Izanagi Plate subducted obliquely beneath the East Asian continent during the Early Cretaceous and orthogonally in the Late Cretaceous. First, the Jinan Basin, a pull‐apart basin, was studied by illite crystallinity and apatite fission‐track analyses. Analytical results indicate that Jinan Basin sediment was heated to a maximum temperature of approximately 287°C by burial. The sediment experienced two cooling episodes during ca 95–80 Ma and after ca 30 Ma, with a quiescent period between them. A similar cooling pattern is recognized in the Gyeongsang Basin, the largest Cretaceous basin in Korea. The Jinan and Gyeongsang Basins were cooled mainly by exhumation between ca 95 and 80 Ma, but the former was exhumed slightly earlier than the latter by transpressional force due to the subduction direction change of the Izanagi Plate. Comparison of thermal history of Korean Cretaceous basins with those of granitoids in northeastern China and the accretionary complexes in southwestern Japan reveals that the Upper Cretaceous regional exhumation of the East Asian continental margin including the Korean peninsula during ca 95–80 Ma was facilitated by the subduction of the Izanagi–Pacific ridge, which migrated northeastwards with time, resulting in the end of regional exhumation at ca 80 Ma in this region.     

Detrital zircon multi‐chronology,provenance, and low‐grade metamorphism of the Cretaceous Shimanto accretionary complex,eastern Shikoku,Southwest Japan: Tectonic evolution in response to igneous activity within a subduction zone

Detrital zircon multi‐chronology combined with provenance and low‐grade metamorphism analyses enables the reinterpretation of the tectonic evolution of the Cretaceous Shimanto accretionary complex in Southwest Japan. Detrital zircon U–Pb ages and provenance analysis defines the depositional age of trench‐fill turbidites associated with igneous activity in provenance. Periods of low igneous activity are recorded by youngest single grain zircon U–Pb ages (YSG) that approximate or are older than the depositional ages obtained from radiolarian fossil‐bearing mudstone. Periods of intensive igneous activity recorded by youngest cluster U–Pb ages (YC1σ) that correspond to the younger limits of radiolarian ages. The YC1σ U–Pb ages obtained from sandstones within mélange units provide more accurate younger depositional ages than radiolarian ages derived from mudstone. Determining true depositional ages requires a combination of fossil data, detrital zircon ages, and provenance information. Fission‐track ages using zircons estimated YC1σ U–Pb ages are useful for assessing depositional and annealing ages for the low‐grade metamorphosed accretionary complex. These new dating presented here indicates the following tectonic history of the accretionary wedge. Evolution of the Shimanto accretionary complex from the Albian to the Turonian was caused by the subduction of the Izanagi plate, a process that supplied sediments via the erosion of Permian and Triassic to Early Jurassic granitic rocks and the eruption of minor amounts of Early Cretaceous intermediate volcanic rocks. The complex subsequently underwent intensive igneous activity from the Coniacian to the early Paleocene as a result of the subduction of a hot and young oceanic slab, such as the Kula–Pacific plate. Finally, the major out‐of‐sequence thrusts of the Fukase Fault and the Aki Tectonic Line formed after the middle Eocene, and this reactivation of the Shimanto accretionary complex as a result of the subduction of the Pacific plate.     

Subduction history of the Paleo-Pacific slab beneath Eurasian continent: Mesozoic-Paleogene magmatic records in Northeast Asia

This paper presents a review on the rock associations, geochemistry, and spatial distribution of Mesozoic-Paleogene igneous rocks in Northeast Asia. The record of magmatism is used to evaluate the spatial-temporal extent and influence of multiple tectonic regimes during the Mesozoic, as well as the onset and history of Paleo-Pacific slab subduction beneath Eurasian continent. Mesozoic-Paleogene magmatism at the continental margin of Northeast Asia can be subdivided into nine stages that took place in the Early-Middle Triassic, Late Triassic, Early Jurassic, Middle Jurassic, Late Jurassic, early Early Cretaceous, late Early Cretaceous, Late Cretaceous, and Paleogene, respectively. The Triassic magmatism is mainly composed of adakitic rocks, bimodal rocks, alkaline igneous rocks, and A-type granites and rhyolites that formed in syn-collisional to post-collisional extensional settings related to the final closure of the Paleo-Asian Ocean. However, Triassic calc-alkaline igneous rocks in the Erguna-Xing’an massifs were associated with the southward subduction of the Mongol-Okhotsk oceanic slab. A passive continental margin setting existed in Northeast Asia during the Triassic. Early Jurassic calc-alkaline igneous rocks have a geochemical affinity to arc-like magmatism, whereas coeval intracontinental magmatism is composed of bimodal igneous rocks and A-type granites. Spatial variations in the potassium contents of Early Jurassic igneous rocks from the continental margin to intracontinental region, together with the presence of an Early Jurassic accretionary complex, reveal that the onset of the Paleo- Pacific slab subduction beneath Eurasian continent occurred in the Early Jurassic. Middle Jurassic to early Early Cretaceous magmatism did not take place at the continental margin of Northeast Asia. This observation, combined with the occurrence of low-altitude biological assemblages and the age population of detrital zircons in an Early Cretaceous accretionary complex, indicates that a strike-slip tectonic regime existed between the continental margin and Paleo-Pacific slab during the Middle Jurassic to early Early Cretaceous. The widespread occurrence of late Early Cretaceous calc-alkaline igneous rocks, I-type granites, and adakitic rocks suggests low-angle subduction of the Paleo-Pacific slab beneath Eurasian continent at this time. The eastward narrowing of the distribution of igneous rocks from the Late Cretaceous to Paleogene, and the change from an intracontinental to continental margin setting, suggest the eastward movement of Eurasian continent and rollback of the Paleo- Pacific slab at this time.     

Accretion and tectonic erosion processes revealed by the mode of occurrence and geochemistry of greenstones in the Cretaceous accretionary complexes of the Idonnappu Zone, southern central Hokkaido, Japan

The Cretaceous accretionary complexes of the Idonnappu Zone in the Urakawa area are divided into five lithological units, four of which contain greenstone bodies. The Lower Cretaceous Naizawa Complex consists of two lithologic units. The Basaltic Unit (B‐Unit) is a large‐scale tectonic slab of greenstone, consisting of depleted tholeiite similar to that of the Lower Sorachi Ophiolite (basal forearc basin ophiolite) in the Sorachi‐Yezo Belt. The Mixed Unit of Naizawa Complex (MN‐Unit) contains oceanic island‐type alkaline greenstones which occur as slab‐like bodies and faulted blocks with tectonically dismembered trench‐fill sediments. Repeated alternations of the two units in the Naizawa Complex may have been formed by the collision of seamounts with forearc ophiolitic body (Lower Sorachi Ophiolite) in the trench. The Upper Cretaceous Horobetsugawa Complex structurally underlies the Naizawa Complex in its original configuration, and it also contains greenstone bodies. Greenstones in the MH‐Unit occur as blocks and sedimentary clasts in a clastic matrix, and exhibit depleted tholeiite and oceanic‐island alkaline basalt/tholeiite chemistry. This unit is interpreted as submarine slide and debris flow deposits. Greenstones in the PT‐Unit occur at the base of several chert‐clastic successions. Most of the greenstones are severely sheared and show normal‐type mid‐ocean ridge basalt composition. The PT‐Unit greenstones are considered to have been derived from abyssal basement peeled off during accretion. The different accretion mechanism of the greenstones in the Naizawa and Horobetsugawa complexes reflects temporal changes in subduction zone conditions. Seamount accretion and tectonic erosion were dominant in the Early Cretaceous, due to highly oblique subduction of the old oceanic crust and minimal sediment supply. Whereas, thick sediments with minor mid‐ocean ridge basalt and olistostrome accreted in the Late Cretaceous, due to near‐orthogonal subduction of young oceanic crust with voluminous sediment supply.     

From incipient island arc to doubly‐vergent orogen: A review of geodynamic models and sedimentary basin‐fills of southern Central America

Southern Central America is a Late Mesozoic/Cenozoic island arc that evolved in response to the subduction of the Farallón Plate beneath the Caribbean Plate in the Late Cretaceous and, from the Oligocene, the Cocos and Nazca Plates. Southern Central America is one of the best studied convergent margins in the world. The aim of this paper is to review the sedimentary and structural evolution of arc‐related sedimentary basins in southern Central America, and to show how the arc developed from a pre‐extensional intra‐oceanic island arc into a doubly‐vergent, subduction orogen. The Cenozoic sedimentary history of southern Central America is placed into the plate tectonic context of existing Caribbean Plate models. From regional basin analysis, the evolution of the southern Central American island arc is subdivided into three phases: (i) non‐extensional stage during the Campanian; (ii) extensional phase during the Maastrichtian‐Oligocene with rapid basin subsidence and deposition of arc‐related, clastic sediments; and (iii) doubly‐vergent, compressional arc phase along the 280 km long southern Costa Rican arc segment related to either oblique subduction of the Nazca plate, west‐to‐east passage of the Nazca–Cocos–Caribbean triple junction, or the subduction of rough oceanic crust of the Cocos Plate. The Pleistocene subduction of the Cocos Ridge contributed to the contraction but was not the primary driver. The architecture of the arc‐related sedimentary basin‐fills has been controlled by four factors: (i) subsidence caused by tectonic mechanisms, linked to the angle and morphology of the incoming plate, as shown by the fact that subduction of aseismic ridges and slab segments with rough crust were important drivers for subduction erosion, controlling the shape of forearc and trench‐slope basins, the lifespan of sedimentary basins, and the subsidence and uplift patterns; (ii) subsidence caused by slab rollback and resulting trench retreat; (iii) eustatic sea‐level changes; and (iv) sediment dispersal systems.     

Origin of the early Cenozoic belt boundary thrust and Izanagi–Pacific ridge subduction in the western Pacific margin

The belt boundary thrust within the Cretaceous–Neogene accretionary complex of the Shimanto Belt, southwestern Japan, extends for more than ~ 1 000 km along the Japanese islands. A common understanding of the origin of the thrust is that it is an out of sequence thrust as a result of continuous accretion since the late Cretaceous and there is a kinematic reason for its maintaining a critically tapered wedge. The timing of the accretion gap and thrusting, however, coincides with the collision of the Paleocene–early Eocene Izanagi–Pacific spreading ridges with the trench along the western Pacific margin, which has been recently re‐hypothesized as younger than the previous assumption with respect to the Kula‐Pacific ridge subduction during the late Cretaceous. The ridge subduction hypothesis provides a consistent explanation for the cessation of magmatic activity along the continental margin and the presence of an unconformity in the forearc basin. This is not only the case in southwestern Japan, but also along the more northern Asian margin in Hokkaido, Sakhalin, and Sikhote‐Alin. This Paleocene–early Eocene ridge subduction hypothesis is also consistent with recently acquired tomographic images beneath the Asian continent. The timing of the Izanagi–Pacific ridge subduction along the western Pacific margin allows for a revision of the classic hypothesis of a great reorganization of the Pacific Plate motion between ~ 47 Ma and 42 Ma, illustrated by the bend in the Hawaii–Emperor chain, because of the change in subduction torque balance and the Oligocene–Miocene back arc spreading after the ridge subduction in the western Pacific margin.     

Westward younging disposition of Philippine ophiolites and its implication for arc evolution

Abstract   The different ophiolite complexes in the Philippine island arc system define a progressive younging direction westward. This resulted from the clockwise rotation of the Philippine island arc system during its north-westward translation in the Eocene resulting in its western boundary colliding with the Sundaland–Eurasian margin. As a consequence of this interaction, ophiolite complexes and mélanges accreted into the Philippine island arc system along its western side. A new ophiolite zonation with four belts is proposed that takes into consideration the observed spatial and temporal relationships of the exposed oceanic lithosphere slices. With progressive younging from east to west, Belt 1 corresponds to Late Cretaceous complete ophiolite complexes with associated metamorphic soles along the eastern Philippines, whereas Belt 2 includes Early to Late Cretaceous dismembered ultramafic-mafic complexes with mélanges exposed mainly west of eastern Philippines. Belt 3 is defined by Cretaceous through Eocene to Oligocene ophiolite complexes emplaced along the collision zone between the Philippine Mobile Belt and the Sundaland–Eurasian margin. Belt 4 corresponds to the ophiolite complexes emplaced along continental margins as exposed in the Palawan and Zamboanga–Sulu areas. This proposed zonation hints that the whole Philippine Mobile Belt, except for the strike-slip fault bounded Eocene Zambales ophiolite complex in Luzon, is underlain by Cretaceous proto-Philippine Sea Plate fragments. This is contrary to the previous models that consider only the eastern margin of the Philippines to contain proto-Philippine Sea Plate materials.     

Ridge collision and in situ greenstones in accretionary complexes: An example from the Late Cretaceous Ryukyu Islands and southwest Japan margin

Abstract Mélange units containing greenstones are common throughout the Cretaceous-Miocene Shimanto Supergroup in the Ryukyu Is and southwest Japan. Most greenstones in the accretionary complex originated in oceanic spreading ridges and seamounts, and they formed far from the convergent margin. Some mélange-like units in the supergroup, however, contain greenstones that were extruded upon and intruded into unconsolidated fine-grained terrigenous clastic sediments. It is inferred that eruption of the in situ greenstones resulted from igneous activity in the trench area. Geochemical signatures indicate that the greenstone protoliths were similar to mafic lavas generated at spreading ridges. Fossil ages of the strata containing in situ greenstones become younger over a distance of 1300 km eastward from Amami-Oshima (Cenomanian-Turonian) in the Ryukyu Is to central Japan (Late Maestrichtian-earliest Paleocene), implying that a site of igneous activity in the trench area migrated eastward along the Ryukyu Is and southwest Japan margin. Plate reconstructions of the northwest Pacific Ocean suggest the presence of the Kula-Pacific ridge near Late Cretaceous to early Paleogene Japan. In this context, it is suggested that the greenstones formed in response to Kula-Pacific ridge-forearc collision.
Ancient ridge-forearc collisions are best recognized by the presence of mid-ocean ridge basalt (MORB) extruded on sediments inferred to have accumulated in the trench area. Diachronous occurrences of the strata associated with these MORB in an orogenic belt are useful for documenting the ridge collision through time.     

Timing of dextral oblique subduction along the eastern margin of the Asian continent in the Late Cretaceous: Evidence from the accretionary complex of the Shimanto Belt in the Kii Peninsula, Southwest Japan

Paleomagnetic studies and hotspot track analyses show that the Kula Plate was subducted dextrally with respect to the Eurasian Plate from the Coniacian to Campanian. However, geological evidence for dextral subduction of the Kula Plate has not been reported from Southwest Japan. Studies of the Coniacian to lower Campanian Miyama Formation of the Shimanto Belt reveal that the mélange fabrics show a dextral sense of shear both at outcrop and microscopic scales. In addition, thrust systems at map-scale also show dextral shearing. Restored shear directions in the mélange indicate dextral oblique subduction of an oceanic plate. This indicates that the Kula Plate subducted dextrally along the eastern margin of Asia during the Coniacian to early Campanian. Combinations with other published kinematic and age constraints suggest that Southwest Japan experienced a change from sinistral to dextral and back to sinistral shear between 89–76 Ma. This history is compatible with global-scale plate reconstructions and places good constraints on the timing of plate boundary interaction with the Cretaceous East Asian margin.     

Tectono-metamorphic evolution of the Cretaceous Shimanto accretionary complex, central Japan: Constraints from a fluid inclusion analysis of syn-tectonic veins

Abstract   Micro-thermometry of water-rich fluid inclusions from two syn-tectonic veins sets ( D1 and D2 veins) in the Otaki Group, part of the Cretaceous Shimanto accretionary complex of the Kanto Mountains, central Japan reveals the following tectono-metamorphic evolution. Combining the results of microthermometric analyses of fluid inclusions from D1 veins with an assumed geothermal gradient of 20–50°C/km indicates that the temperature and fluid pressure conditions during D1 were 270–300°C and 140–190 MPa, respectively. Peak metamorphic conditions during the development of D2 slaty cleavage involved temperatures in excess of 300°C and fluid pressures greater than 270 MPa, based on analyses of microthermometry of water-rich fluid inclusions from the D2 vein and illite crystallinity. The estimated fluid pressure increased by approximately 80 MPa from D1 accretionary processes to metamorphism and slaty cleavage development during D2 . Assuming that fluid pressure reached lithostatic pressure, the observed increase in fluid pressure can be accounted for by thrusting of the Jurassic Chichibu accretionary complex over the Cretaceous Shimanto accretionary complex. Following thrusting, both accretionary complexes were subjected to metamorphism during the latest Cretaceous.     

Mesozoic to Tertiary tectonic history of the Mirdita ophiolites, northern Albania

Abstract In this paper, a summary of the tectonic history of the Mirdita ophiolitic nappe, northern Albania, is proposed by geological and structural data. The Mirdita ophiolitic nappe includes a subophiolite mélange, the Rubik complex, overlain by two ophiolite units, referred to as the Western and Eastern units. Its history started in the Early Triassic with a rifting stage followed by a Middle to Late Triassic oceanic opening between the Adria and Eurasia continental margins. Subsequently, in Early Jurassic time, the oceanic basin was affected by convergence with the development of a subduction zone. The existence of this subduction zone is provided by the occurrence of the supra‐subduction‐zone‐related magmatic sequences found in both the Western and Eastern units of the Mirdita ophiolitic nappe. During the Middle Jurassic, continuous convergence resulted in the obduction of the oceanic lithosphere, in two different stages – the intraoceanic and marginal stages. The intraoceanic stage is characterized by the westward thrusting of a young and still hot section of oceanic lithosphere leading to the development of a metamorphic sole. In the Late Jurassic, the marginal stage developed by the emplacement of the ophiolitic nappe onto the continental margin. During this second stage, the emplacement of the ophiolites resulted in the development of the Rubik complex. In the Early Cretaceous, the final emplacement of the ophiolites was followed by the unconformable sedimentation of the Barremian–Senonian platform carbonate. From the Late Cretaceous to the Middle Miocene, the Mirdita ophiolitic nappe was translated westward during the progressive migration of the deformation front toward the Adria Plate. In the Middle to Late Miocene, a thinning of the whole nappe pile was achieved by extensional tectonics, while the compression was still active in the westernmost areas of the Adria Plate. On the whole, the Miocene deformations resulted in the uplift and exposition of the Mirdita ophiolites as observed today.     

History and modes of Mesozoic accretion in Southeastern Russia

Abstract The history of Mesozoic accretion and growth of the Asia eastern margin, occupied by Southeastern Russia, includes five main events; two main tectonic regimes were responsible for the growth of the continent. In the Triassic-Jurassic, Early Cretaceous and Late Cretaceous-Paleogene, the subduction of the oceanic lithosphere resulted in the formation of wide accretionary wedges of the Mongol-Okhotsk, Khingan-Okhotsk and Eastern Sikhote-Alin active continental margins, respectively. These stages of the comparatively slow growth of the continent were broken by stages of rapid growth and drastic changes in the shape of the continent, since at these stages large terranes of various tectonic nature collided with active continental margins. At the end of the Early-Middle Jurassic, the Bureya terranes collided with the Mongol-Okhotsk active margin, and at the beginning of the Late Cretaceous there was collision of the Central and Southern Sikhote-Alin terranes with the Khingan-Okhotsk active margin.
Collision-related structural styles in all cases are indicative of oblique collision and great strike-slip motions along the main sutures. The peculiarities of the terrane's geological structure show that prior to collision with the Mongol-Okhotsk and Khingan-Okhotsk active margins, they had already accreted to Asia and then migrated along its margins along the strike-slip faults. The Bureya terranes were squeezed out of the compression zone between Siberia and North China. This compression zone originated after the Paleozoic oceans which divided these cratons had closed. The Khanka terranes and Mesozoic accretionary wedge terranes of the Sikhote-Alin shifted along the strike-slip faults subparallel to the Asia Pacific margin. Strike-slip motions resulted in duplication of the primary tectonic zonation.     

Toward a unified model of Altaids geodynamics: Insight from the Palaeozoic polycyclic evolution of West Junggar (NW China)

The Altaid tectonic collage extends over Central Asia, exposing numerous accretionary orogens that can account for the Palaeozoic continental crust growth. A pluridisciplinary approach, using geochronological, geochemical, structural and palaeomagnetic tools was carried out to unravel the architecture and the evolution of West Junggar(Northwestern China), a segment of the Altaid Collage. A polycyclic geodynamic evolution is inferred and includes:(1) an Early Palaeozoic cycle, characterized by the closure of two oceanic basins bounded by island-arc systems;(2) an Early Devonian subduction jamming resulting in a minor-scale collision documented by thrusting, syntectonic sedimentation and subsequent crutal thinning associated with alkaline magmatism;(3) a Late Palaeozoic cycle, driven by the evolution of two opposite subduction zones developed upon the Early Palaeozoic basement. Detailed structural analysis and paleomagnetic data provide constraints for the late evolution of Junggar in the frame of the development of the Late Palaeozoic Kazakh orocline, which led to oblique subduction and transpression in the West Junggar accretionary complex. Progressive buckling of the Kazakh orocline further resulted in Late Carboniferous to Permian wrench tectonics, and lateral displacement of lithotectonic units. Block rotations that continued after the Late Triassic are due to diachronous intraplate reactivation. This scenario mirrors the Palaeozoic geodynamics of the Altaid Collage. Multiple Early Palaeozoic collisions of intra-oceanic arcs and micro continents have contributed to the formation of the Kazakhstan Microcontinent. Since the Late Palaeozoic, subductions formed around this microcontinent and the final oblique closure of oceanic domains resulted in the transcurrent collage of Tarim and Siberia cratons. Palaeozoic strike-slip faults were later reactivated during Mesozoic intracontinental tectonics.     

Triassic mid-oceanic sedimentation in Panthalassa Ocean: Sambosan accretionary complex, Japan

Abstract   The Sambosan accretionary complex of southwest Japan was formed during the uppermost Jurassic to lowermost Cretaceous and consists of basaltic rocks, carbonates and siliceous rocks. The Sambosan oceanic rocks were grouped into four stratigraphic successions: (i) Middle Upper Triassic basaltic rock; (ii) Upper Triassic shallow-water limestone; (iii) limestone breccia; and (iv) Middle Middle Triassic to lower Upper Jurassic siliceous rock successions. The basaltic rocks have a geochemical affinity with oceanic island basalt of a normal hotspot origin. The shallow-water limestone, limestone breccia, and siliceous rock successions are interpreted to be sediments on the seamount-top, upper seamount-flank and surrounding ocean floor, respectively. Deposition of the radiolarian chert of the siliceous rock succession took place on the ocean floor in Late Anisian and continued until Middle Jurassic. Oceanic island basalt was erupted to form a seamount by an intraplate volcanism in Late Carnian. Late Triassic shallow-water carbonate sedimentation occurred at the top of this seamount. Accumulation of the radiolarian chert was temporally replaced by Late Carnian to Early Norian deep-water pelagic carbonate sedimentation. Biotic association and lithologic properties of the pelagic carbonates suggest that an enormous production and accumulation of calcareous planktonic biotas occurred in an open-ocean realm of the Panthalassa Ocean in Late Carnian through Early Norian. Upper Norian ribbon chert of the siliceous rock succession contains thin beds of limestone breccia displaced from the shallow-water buildup resting upon the seamount. The shallow-water limestone and siliceous rock successions are nearly coeval with one another and are laterally linked by displaced carbonates in the siliceous rock succession.     

Oblique subduction, collision of microcontinents and subduction of oceanic ridge: Their implications on the Cretaceous tectonics of Japan

Abstract The Izanagi plate subducted rapidly and obliquely under the accretionary terrane of Japan in the Cretaceous before 85 Ma. A chain of microcontinents collided with it at about 140 Ma. In southwest Japan the major part of it subducted thereafter, but in northeast Japan it accreted and the trench jumped oceanward, resulting in a curved volcanic front. The oblique subduction and the underplated microcon-tinent caused uplifting of high-pressure (high-P) metamorphic rocks and large scale crustal shortening in southwest Japan. The oblique subduction caused left-lateral faulting and ductile shearing in northeast Japan. The arc sliver crossed over the high-temperature (high-T) zone of arc magmatism, resulting in a wide high-T metamorphosed belt. At about 85 Ma, the subduction mode changed from oblique to normal and the tectonic mode changed drastically. Just after this the Kula/Pacific ridge subducted and the subduction rate of the Pacific plate decreased gradually, causing the intrusion of huge amounts of granite magma and the eruption of acidic volcanics from large cauldrons. The oblique subduction of the Pacific plate resumed at 53 Ma and the left-lateral faults were reactivated.     

Features and origin time of Mesozoic strike-slip structures in the Yilan-Yitong Fault Zone

The NE-striking Yilan-Yitong Fault Zone(YYFZ) with a length of ca. 900 km is an important major fault zone in northeastern China. Its origin has been a controversial issue for a long time. Detailed field investigation and comprehensive analyses show that strike-slip faults or ductile shear belts exist as the origination structures on the both shoulders of the Cretaceous-Paleogene grabens. These strike-slip structures are dominated by brittle transcurrent faults, and appear as ductile shear belts only in the Weiyuanpu-Yehe and Shulan parts in the south and middle of the fault zone, respectively. The shear belts strike NE-SW and show steep mylonitic foliation and gentle mineral elongation lineation. Outcrop structures, microstructures and quartz c-axis fabrics demonstrate a sinistral shear sense with minor reverse component for the ductile shear belts. The microstructures suggest deformation temperatures of 400–450°C for the Weiyuanpu-Yehe shear belts and 350–400°C for the Shulan shear belt. A series of zircon U-Pb dating results for deformed and undeformed plutons or dikes in the shear belts constrain the strike-slip motion to the time between 160 and 126 Ma. It is further inferred from ages of main geological events in this region that the fault zone originated in the earliest Early Cretaceous. It is suggested therefore that the southern and middle parts of the Tan-Lu Fault Zone, which originated in Middle Triassic, propagated into northeastern China along the sinistral YYFZ under the earliest Early Cretaceous regional compression that is referred to as the Yanshan B event. The earliest Early Cretaceous initiation of the YYFZ results from both the high-speed oblique subduction of the Izanagi Plate and the final closure of the Mongol-Okhotsk Ocean, but the Izanagi Plate subduction played a major dynamic role in the fault zone origin.