Fault-induced perturbed stress fields and associated tensile and compressive deformation at fault tips in the ice shell of Europa: implications for fault mechanics

Secondary fractures at the tips of strike-slip faults are common in the ice shell of Europa. Large magnitude perturbed stress fields must therefore be considered to be a viable driving mechanism for the development of part of the fracture sequence. Fault motions produce extensional and compressional quadrants around the fault tips. Theoretically, these quadrants can be associated with tensile and compressive deformational features (i.e. cracks and anti-cracks), respectively. Accordingly, we describe examples of both types of deformation at fault tips on Europa in the form of extensional tailcracks and compressional anti-cracks. The characteristics of these features with respect to the plane of the fault create a fingerprint for the mechanics of fault slip accumulation when compared with linear elastic fracture mechanics (LEFM) models of perturbed stress fields around fault tips. Tailcrack kink angles and curving geometry can be used to determine whether opening accompanies sliding motion. Kink angles in the 50–70° range are common along strike-slip faults that resemble ridges, and indicate that little to no opening accompanied sliding. In contrast, tailcrack kink angles are closer to 30° for strike-slip faults that resemble bands, with tailcrack curvatures opposite to ridge-like fault examples, indicating that these faults undergo significant dilation and infill during fault slip episodes. Anti-cracks, which may result from compression and volume reduction of porous near-surface ice, have geometries that further constrain fault motion history, corroborating the results of tailcrack analysis. The angular separation between anti-cracks and tailcracks are similar to LEFM predictions, indicating the absence of cohesive end-zones near the tips of Europan faults, hence suggesting homogeneous frictional properties along the fault length. Tailcrack analysis can be applied to the interpretation of cycloidal ridges: chains of arcuate cracks on Europa that are separated by sharp kinks called cusps. Cusp angles are reminiscent of tailcrack kink angles along ridge-like strike-slip faults. Cycloid growth in a temporally variable tidal stress field ultimately resolves shear stresses onto the near-tip region of a growing cycloid segment. Thus, resultant slip and associated tailcrack development may be the driving force behind the initiation of the succeeding arcuate segment, hence facilitating the ongoing propagation of the cycloid chain.     

Fault-valve behaviour in optimally oriented shear zones: an example at the Revenge gold mine, Kambalda, Western Australia

Quartz vein systems developed in and adjacent to shear zones host major gold deposits in the Kambalda region of the Norseman–Wiluna greenstone belt. At the Revenge Mine, two groups of mineralised reverse shear zones formed as conjugate, near-optimally oriented sets during ESE subhorizontal shortening adjacent to a major transpressional shear system. The shear zones developed at temperatures of about 400°C in a transitional brittle–ductile regime. Deformation was associated with high fluid fluxes and involved fault-valve behaviour at transiently near-lithostatic fluid pressures. During progressive evolution of the shear system, early brittle and ductile deformation was overprinted by predominantly brittle deformation. Brittle shear failure was associated with fault dilation and the formation of fault-fill veins, particularly at fault bends and jogs. A transition from predominantly brittle shear failure to combined shear along faults and extension failure adjacent to faults occurred late during shear zone evolution and is interpreted as a response to a progressive decrease in maximum shear stress and a decrease in effective stresses. The formation of subhorizontal stylolites, locally subvertical extension veins and minor normal faults in association with thrust faulting, indicates episodic or transient reorientation of the near-field maximum principal stress from a subhorizontal to a near-vertical attitude during some fault-valve cycles. Local stress re-orientation is interpreted as resulting from near-total shear stress release and overshoot during some rupture events. Previously described fault-valve systems have formed predominantly in severely misoriented faults. The shear systems at Revenge Mine indicate that fault-valve action, and associated fluctuations in shear stress and fluid pressure, can influence the mechanical behaviour of optimally-oriented faults.     

Growth processes,dimensional parameters and scaling relationships of two conjugate sets of compactive shear bands in porous carbonate grainstones,Favignana Island,Italy

Three main sets of deformation bands are identified in the Lower Pleistocene carbonate grainstones of Favignana Island (Italy). A bedding-parallel set is interpreted to contain compaction bands, based on the lack of evidence for shear. The other two sets are oriented at a high-angle to bedding, forming a conjugate pair comprised of compactive strike-slip shear bands. In this study, we focus on the compactive shear bands documenting their development, as well as analyzing their dimensional parameters and scaling relationships.Single compactive shear bands are thin, tabular zones with porosity less than the surrounding host rocks, and have thicknesses and displacements on the order of a few mm. The growth process for these structures involves localizing further deformation within zones of closely-spaced compactive shear bands and, possibly, along continuous slip surfaces within fault rocks overprinting older zones of bands. During growth, single bands, zones of bands and faults can interact and link, producing larger structures. The transitions from one growth step to another, which are controlled by changes in the deformation behavior (i.e. banding vs. faulting), are recorded by different values of the dimensional parameters for the structures (i.e. length, thickness and displacement). These transitions are also reflected by the ratios and distributions of the dimensional parameters. Considering the lesser porosity values of the structures with respect to the host rock, the results of this contribution could be helpful for mapping, assessing, and simulating carbonate grainstone reservoirs with similar structures.     

剪切带型金矿中金沉淀的力化学过程与成矿机理探讨

剪切带型金矿是一种重要的金矿床类型,有关该类型金矿的成因问题已开展了大量研究,但对于剪切带中金的沉淀析出机制和成矿过程仍存在较大争议,对于赋矿部位的构造属性与矿床关系的研究尚显薄弱。对此笔者整理分析了近年来国内外有关剪切带型金矿的研究进展,并结合我国胶东金矿的研究实例,运用断层阀和力化学理论分析发现,无论是脆性还是韧性剪切带,无论是脉型还是蚀变岩型金矿,其成矿的关键部位均与构造应力集中而导致的脆性破裂(特别是R、T、R’破裂的产生)和碎裂作用以及(多期)岩体侵位密切相关,并且脆性破裂所导致的压力骤降从而引发流体闪蒸的力化学过程可能是造成金沉淀析出成矿的有效机制,其中多期岩体侵位所提供的流体是成矿的物质基础。此外,从国内外实例可以看出,剪切带中的脆性破裂不仅发生于脆性或脆韧性构造域,也可以发生在较深层次的韧性构造域中,尽管韧性域中产生脆性破裂的原因还不十分清楚,但这可能是韧性剪切带成矿的关键机制之一。最后,综合岩体、流体、剪切带三者对成矿的耦合作用,文中提出剪切带型金矿的成矿机理为:(多期)岩体侵位-热液活动-构造剪切-应力集中-脆性破裂(碎裂)产生-压力骤降-流体闪蒸-元素(金)析出,如此循环往复方可形成大型剪切带型金矿。     

The generation of ductile and brittle shear bands in a low-angle mylonite zone

In the Saint-Barthélemy Massif, French Pyrenees, a ductile thrust zone developed in gneisses during retrogression from lower amphibolite facies conditions to the upper greenschist facies. The last major structures formed in the zone are isolated shear bands, divided into three types.Anastomosing, inhomogenous ultramylonitic shear bands (Type I) are subparallel to the mylonitic foliation in the gneiss (S_g). Most of these bands developed by ductile deformation processes only.Planar, homogeneous ultramylonite bands (Type II) are usually oblique to S_g. They generated as pseudotachylyte bands by brittle fracturing and underwent strong subsequent ductile deformation.Type III shear bands are planar and oblique to S_g. They consist of pseudotachylyte, weakly affected by ductile deformation.Type I, II and III bands seem to represent progressively younger structures on a local scale, linked to falling P-T conditions. The systematic variation in orientation of the different shear bands with respect to S_g is interpreted as being due to a different response of brittle and ductile structures to the orientation of the kinematic frame and the rock anisotropy.     

Quaternary thermokarst and thermal erosion features in northern France: origin and palaeoenvironments

A thermokarst is a collapse feature resulting from the thawing of ice‐rich permafrost or of massive ice of various origins. Little attention has been paid to the sedimentary fabric resulting from this type of collapse, except for glaciotectonic features. In western Europe, two palaeo‐forms are commonly studied: lithalsas and ice‐wedge casts. Collapsed pingos are much rarer. Very few papers have compiled present‐day and fossil data. Here, field data collected from quarries in the eastern Paris Basin were analysed, providing useful records of thermokarst collapses in alluvial calcareous silts, sands, and gravels. These forms have a circular shape when viewed on satellite images. Permafrost is attested regionally by the recurrent occurrence of meter‐sized pattern grounds at the surface of the chalk and of ice‐wedge casts. Traces of segregation and reticulate ice are common. These features are primarily connected to a major interstadial, c. 150 ka BP, orbitally forced and commonly associated with a major glacial retreat. They occur both in drained and waterlogged situations, resulting in a specific pattern of deformation. They are controlled by the brittle and plastic behaviour of sediments and resemble passive glaciotectonism. Normal and reverse faults, with the offset decreasing downward, are common, and those with local shear are reported. Lithalsas, seasonal frost blisters, spring frost blisters and perhaps pingos seem to have formed. Most of these deformations correspond to thermokarst sinkholes bordered by gravitational collapse faults. The offset of these faults increases towards the surface, and the faults have been recurrently confused with neotectonism triggered by palaeo‐earthquakes. However, there are no faults beneath the observed deformation features, and the region lacks recorded seismic activity over the last century. Our data may be helpful in interpreting similar structures elsewhere.     

Superposition of extensional detachments during the Neogene in the internal zones of the Betic cordilleras

 In the internal zones of the Betic cordilleras, extensional structures have developed from the Upper Oligocene to the present day; they are contemporaneous with compressional structures (folds and thrusts) in the external zones. From the Upper Oligocene to the Aquitanian, extension occurred in the Maláguide/Alpujárride detachment, and related structures show varying kinematics in different sectors. Younger deformations with a top-to-the-N sense of movement have affected Nevado-Filábride (ductile shear zones), Alpujárride (ductile and brittle shear zones) and Maláguide rocks (normal faults). At least from the Late Burdigalian up to the Lower Tortonian, displacements have occurred in the Alpujárride/Nevado-Filábride detachment. Deformations have been generally non-coaxial, with a top-to-the-W sense of movement. Stretching lineation trends in the Nevado-Filábride rocks curve from E to W suggesting a progressive variation of the ductile-shear-zone kinematics related to the Alpujárride/Nevado-Filábride detachment between the Aquitanian and Lower Tortonian stages. Deformations from the Lower Tortonian to the present day are normal faults, formed in extensional settings in the upper part of the crust, and folds and strike-slip faults which indicate N–S to NNW–SSE shortening directions and E–W to ENE–WSW extension directions. Received: 26 December 1995 / Accepted: 26 January 1996     

Tectonic and lithological constraints on the evolution of the Karoo graben of northern Malawi (East Africa)

The results of a lithostratigraphic, tectonic and kinematic study of the Karoo deposits of northern Malawi are reported. The objective of the lithostratigraphic study is to correlate the deposits of the Karoo basins of northern Malawi with the well-known deposits of southern Tanzania, thus establishing a stratigraphic framework through which the timing of faulting can be constrained. The kinematic analysis of faulting constrains the opening direction for the Karoo graben in this area and provides basic data to discuss the Karoo graben development within the regional tectonic framework of south-eastern Africa. The studied adults are defined by moderately to steeply dipping cataclastic zones with a width of up to 15 m and are characterized by an array of slickensided fault surfaces with different orientations and slip directions. In this study, small faults (offset < 10 m) and meso-scale faults (offset > 10 m, but generally not exceeding 30–40 m) have been distinguished. Methods used to analyse the kinematic data include the ‘pressure tension’ (PT) method, which estimates the principal axes for the bulk brittle strain, and the internal rotation axis (IRA) method, which estimates the axis of bulk internal rotation and the overall sense of slip at the faults. A mass balance calculation reveals a volume increase of up to 16% during cataclastic deformation in the fault zones. The PT method shows an approximately east trending extension direction for faults that occur only in the latest Carboniferous (?) and Early Permian strata, whereas the fault kinematics from faults that cut middle Permian to Early Triassic rocks is characterized by a ESE to SE trending extension direction. The small faults yield essentially the same kinematic results as the meso-scale faults. In a transport-parallel cross-sectional view, the principal extension axes are at an acute angle of approximately 60° to the major fault planes. Given the moderate fault density, the relatively high angle between the orientation of the principal extension axis and the fault planes suggest only a moderate amount of horizontal extension across the Karoo graben of northern Malawi. Riedel structures in the fault zones formed within two conjugate sets of localized shear zones; slip on one set was top to the W/NW and, on the other, top to the E/SE. The two conjugate sets of Riedel structures have an acute angle about the regional shortening axes, implying that no pronounced rotation of the strain axes occurred. The internal rotation axes for the Riedel structures reveal a largely bimodal distribution and inferred weakly monoclinic to orthorhombic symmetry. Therefore the overall deformation during Karoo rifting in northern Malawi is interpreted to be close to a coaxial deformation with a limited amount of horizontal extension.[/p]     

Changes in permeability of sand during triaxial loading: effect of fine particles production

Various mechanisms can affect the permeability of dense unconsolidated sands: Volumetric dilation can lead to permeability increase, whereas strain localization in shear bands may increase or decrease the permeability depending on the state of compaction and on the level of grains breakage inside the band. To investigate these various mechanisms, an experimental study has been performed to explore the effect of different factors such as grain size and grain shape, confining pressure, level of shear, stress path, and formation of one or several shear bands on the permeability of dense sands under triaxial loading. The experimental results show a reduction of permeability during the consolidation phase and during the volumetric contraction phase of shear loading, which can be related to the decrease of porosity. The experimental results also show that, depending on the confining pressure, the permeability remains stable or decreases during the volumetric dilation phase despite the increase of total porosity. This permeability reduction is attributed to the presence of fine particles, which result from grains attrition during pre-localization and grains breakage inside the shear band during the post-localization phase.     

Subglacial deformation and water-pressure cycles as a key for understanding ice stream dynamics: evidence from the Late Ordovician succession of the Djado Basin (Niger)

Subglacial deformation is crucial to reconstructing glacier dynamics. Sediments associated with the Late Ordovician ice sheet in the Djado Basin, Niger, exhibit detailed structures of the subglacial shear zone. Three main types of subglacial shear zones (SSZ) are discriminated. The lowermost SSZ, developed on sandstones, displays Riedel macrostructures and cataclastic microstructures. These resulted from brittle deformation associated with strong glacier/bed coupling and low pore-water pressure. Where they developed on a clay-rich bed, the overlying SSZ display S–C to S–C′ fabrics, sheath folds, and dewatering structures. These features indicate high ductile shear strain and water overpressure. On fine-grained sand beds, the SSZ exhibit homogenized sand units with sand stringers, interpreted as fluidized sliding beds. The succession of subglacial deformation processes depends on fluid-pressure behavior in relation to subglacial sediment permeability. Fluid overpressure allows subglacial sediment shear strength and ice/bed coupling to be lowered, leading to ice streaming.     

玲珑金矿田花岗岩中韧性剪切带与成矿的关系

珑玲燕山期交代型花岗岩,是在构造活动的驱使下,由共存重熔岩浆交代胶东群变质岩生成的壳源花岗岩,成岩作用是在可塑性准固体状态下进行的。伴随底辟侵位广泛形成韧性剪切带,发育有各种塑变、应变结构和糜棱岩化。随着岩体温度和可塑度的降低,相继发生脆性断裂,往往叠加在韧性剪切带之上。这种构造叠加部位为矿液造成良好的通道和富集部位。     

新世纪构造地质学两大支柱理论: 最大有效力矩准则与变位形分解

传统构造地质学用摩尔-库伦准则和贝克尔的应变椭球体理念分别解释地壳中的脆性断层和塑性变形,将变形局部化的韧性剪切带形成解释为平行应变椭球体的圆切面,却无法解释变形局部化的共轭剪切带稳定夹角~110°面对应缩短方向。变形局部化是独立于脆性和塑性变形外的变形领域,受最大有效力矩准则控制。20世纪末提出的变位形分解理念,摆脱连续介质力学的束缚,合理地说明广泛存在的走滑断层平行俯冲带或逆冲断层带。非均匀变形和非连续介质力学理念的建立,为地质学与力学的结合开辟了新的前景。文章试用上述两理念概略分析中国和邻区中新生代构造格局,以期引发讨论。     

Ground subsidence,Quaternary faults and vulnerability of utilities and transportation networks in Thessaly,Greece

Ground fissures and subsidence have caused extensive damage in structures and the utility networks (roads, railroad line, Larisa NATO airport, telecommunication network) in the plain of Thessaly, central Greece, in the last 20 years. The fact that these fissures are parallel to Quaternary faults controlling the structural evolution of the Thessaly basin, marked by intense recent seismic activity, led some scientists to regard them as manifestation of tectonic creep, even premonitory phenomena of major future seismic events. A careful study of the geometric characteristics and of the kinematics of these ground fissures, however, revealed that they only reflect shear failure of the ground due to compaction of loose sediments following significant decline of the groundwater level due to over-pumping; i.e. a geotechnical and not a tectonic process. Furthermore, theoretical considerations and modeling predict surface fissuring along zones of anomalous basement, normal-fault controlled topography. This explains the correlation between ground fissures and active Quaternary normal faults.     

脆性断层运动学研究新进展

本文概述了80年代以来脆性断层运动研究方面的某些成果。介绍了脆性断层带中的一些小构造和显微构造的几何特征以及它们的运动学意义。重点论述了从露头尺度到薄片尺度确定脆性断层运动方向的三种构造判据,既从属裂隙、岩桥构造和方解石e双晶判据。     

Seafloor spreading, obduction and triple junction tectonics of the Mineoka Ophiolite, Central Japan

The Tertiary Mineoka ophiolite occurs in a fault zone at the intersection of the Honshu and Izu forearcs in central Japan and displays structural evidence for three major phases of deformation: normal and oblique-slip faults and hydrothermal veins formed during the seafloor spreading evolution of the ophiolite at a ridge-transform fault intersection. These structures may represent repeated changes in differential stress and pore-fluid pressures during their formation. The second series of deformation is characterized by oblique thrust faults with Riedel shears and no significant mineral veining, and is interpreted to have resulted from transpressional dextral faulting during the obduction of the ophiolite through oblique convergence and tectonic accretion. This deformation occurred at the NW corner of a TTT-type (trench–trench–trench) triple junction in the NW Pacific rim before the middle Miocene. The third series of deformation of the ophiolite is marked by contractional and oblique shear zones, Riedel shears, and thrust faults that crosscut and offset earlier structures, and that give the Mineoka fault zone its lenticular (phacoidal) fabric at all scales. This deformation phase was associated with the establishment and the southward migration of the TTT Boso triple junction and with the kinematics of oblique subduction and forearc sliver fault development. The composite Mineoka ophiolite hence displays rocks and structures that evolved during its complex geodynamic history involving seafloor spreading, tectonic accretion, and triple junction evolution in the NW Pacific Rim.     

En echelon fractures in a dextral shear zone - tectonic heritage for a hydrothermal cave (Budapest, Hungary)

Microtectonic study of brittle structures in the József Hill Cave, Budapest, highlights the connection between different phases of fracturing and cave formation. E-W trending dextral faults (second order Riedels) and NW-SE oriented tension fractures developed in a ENE-WSW trending dextral shear zone as a result of WNW-ESE directed compression. Ascending thermal water dissolved cave galleries and created barite veins along these fractures. The first stage of cave formation as inferred from timing of fracturation from the regional stress field was Oligocene-Early Miocene. Between the Middle Miocene and Quaternary new N-S to NE-SW trending normal faults were formed by ESE-WNW extension. Pleistocene differential uplift resulted in the reactivation and enlarging of fault zones, dominantly the E-W trending older Riedels. These recent tectonic events enhanced the original en echelon geometry of the older cave corridors.     

An outline of neotectonic structures and morphotectonics of the western and central Pannonian Basin

Neotectonic deformation in the western and central part of the Pannonian Basin was investigated by means of surface and subsurface structural analyses, and geomorphologic observations. The applied methodology includes the study of outcrops, industrial seismic profiles, digital elevation models, topographic maps, and borehole data. Observations suggest that most of the neotectonic structures in the Pannonian Basin are related to the inverse reactivation of earlier faults formed mainly during the Miocene syn- and post-rift phases. Typical structures are folds, blind reverse faults, and transpressional strike-slip faults, although normal or oblique-normal faults are also present. These structures significantly controlled the evolution of landforms and the drainage pattern by inducing surface upwarping and river deflections. Our analyses do not support the postulated tectonic origin of some landforms, particularly that of the radial valley system in the western Pannonian Basin. The most important neotectonic strike-slip faults are trending to east-northeast and have dextral to sinistral kinematics in the south-western and central-eastern part of the studied area, respectively. The suggested along-strike change of kinematics within the same shear zones is in agreement with the fan-shaped recent stress trajectories and with the present-day motion of crustal blocks derived from GPS data.     

Near N–S paleo-extension in the western Deccan region,India: Does it link strike-slip tectonics with India–Seychelles rifting?

This is the first detailed report and analyses of deformation from the W part of the Deccan large igneous province (DLIP), Maharashtra, India. This deformation, related to the India–Seychelles rifting during Late Cretaceous–Early Paleocene, was studied, and the paleostress tensors were deduced. Near N–S trending shear zones, lineaments, and faults were already reported without significant detail. An E–W extension was envisaged by the previous workers to explain the India–Seychelles rift at ~64 Ma. The direction of extension, however, does not match with their N–S brittle shear zones and also those faults (sub-vertical, ~NE–SW/~NW–SE, and few ~N–S) we report and emphasize in this work. Slickenside-bearing fault planes, brittle shear zones, and extension fractures in meso-scale enabled us to estimate the paleostress tensors (directions and relative magnitudes). The field study was complemented by remote sensing lineament analyses to map dykes and shear zones. Dykes emplaced along pre-existing ~N–S to ~NE–SW/~NW–SE shears/fractures. This information was used to derive regional paleostress trends. A ~NW–SE/NE–SW minimum compressive stress in the oldest Kalsubai Subgroup and a ~N–S direction for the younger Lonavala, Wai, and Salsette Subgroups were deciphered. Thus, a ~NW/NE to ~N–S extension is put forward that refutes the popular view of E–W India–Seychelles extension. Paleostress analyses indicate that this is an oblique rifted margin. Field criteria suggest only ~NE–SW and ~NW–SE, with some ~N–S strike-slip faults/brittle shear zones. We refer this deformation zone as the "Western Deccan Strike-slip Zone" (WDSZ). The observed deformation was matched with offshore tectonics deciphered mainly from faults interpreted on seismic profiles and from magnetic seafloor spreading anomalies. These geophysical findings too indicate oblique rifting in this part of the W Indian passive margin. We argue that the Seychelles microcontinent separated from India only after much of the DLIP erupted. Further studies of magma-rich passive margins with respect to timing and architecture of deformation and emplacement of volcanics are required.     

The future of failure: stress or strain?

Strains in rocks can be observed but ancient stresses can only be inferred. We should re-examine the potential of strain geometry as the key to understanding and interpreting common shear structures ranging from faults to plastic shear zones. The concept of failure along zero extension directions can be applied to natural structures in rocks and is predicated on strain compatibility between differently strained volumes. Zero extension directions are considered for two strain configurations, plane strain (k=1) and uniaxial shortening (k=0). The crucial difference between shear fractures, or faults, and plastic yield zones is that the former are preceded by dilatation while the latter are isovolumetric. Volume changes during deformation affect the orientations of zero extension directions and hence of the resulting structures. With isovolumetric strain, yield occurs on planes at 45° to the principal shortening direction in plane strain and at 54.7° to this axis in uniaxial shortening. Uniaxial shortening experiments on rock samples allow estimation of the relative volumetric strains when yield zones initiate. When this volumetric strain is used to estimate the orientation of shear fractures in plane strain, ca 70° dips are predicted for normal faults at high crustal levels, decreasing downwards to 45°.     

胶东半岛金矿床控矿构造特点浅析

胶东半岛金矿床的矿体(脉)均严格受断裂构造控制,这种控矿的脆/韧性叠加构造的显著特点是多期(次)活动的叠加,经过了早期的韧性剪切、后期的脆性压扭性碎裂岩化、晚期的脆性张性断裂叠加3个阶段.脆/韧型叠加构造与按"构造相"划分的脆-韧性剪切带是不同的概念,它们是性质和演化历史完全各异的两类断裂构造.金矿往往直接产于张性断裂之中,但是在同空间中更早形成的韧性剪切带和压扭性碎裂岩则对金矿化的规模具有明显的控制作用.